arch/arm/boot/dts/qcom-ipq8064.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "skeleton.dtsi"
   5 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
   6 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
   7 #include <dt-bindings/soc/qcom,gsbi.h>
   8
   9 / {
  10         model = "Qualcomm IPQ8064";
  11         compatible = "qcom,ipq8064";
  12         interrupt-parent = <&intc>;
  13
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 cpu@0 {
  19                         compatible = "qcom,krait";
  20                         enable-method = "qcom,kpss-acc-v1";
  21                         device_type = "cpu";
  22                         reg = <0>;
  23                         next-level-cache = <&L2>;
  24                         qcom,acc = <&acc0>;
  25                         qcom,saw = <&saw0>;
  26                 };
  27
  28                 cpu@1 {
  29                         compatible = "qcom,krait";
  30                         enable-method = "qcom,kpss-acc-v1";
  31                         device_type = "cpu";
  32                         reg = <1>;
  33                         next-level-cache = <&L2>;
  34                         qcom,acc = <&acc1>;
  35                         qcom,saw = <&saw1>;
  36                 };
  37
  38                 L2: l2-cache {
  39                         compatible = "cache";
  40                         cache-level = <2>;
  41                 };
  42         };
  43
  44         cpu-pmu {
  45                 compatible = "qcom,krait-pmu";
  46                 interrupts = <1 10 0x304>;
  47         };
  48
  49         reserved-memory {
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52                 ranges;
  53
  54                 nss@40000000 {
  55                         reg = <0x40000000 0x1000000>;
  56                         no-map;
  57                 };
  58
  59                 smem@41000000 {
  60                         reg = <0x41000000 0x200000>;
  61                         no-map;
  62                 };
  63         };
  64
  65         clocks {
  66                 cxo_board {
  67                         compatible = "fixed-clock";
  68                         #clock-cells = <0>;
  69                         clock-frequency = <25000000>;
  70                 };
  71
  72                 pxo_board {
  73                         compatible = "fixed-clock";
  74                         #clock-cells = <0>;
  75                         clock-frequency = <25000000>;
  76                 };
  77
  78                 sleep_clk: sleep_clk {
  79                         compatible = "fixed-clock";
  80                         clock-frequency = <32768>;
  81                         #clock-cells = <0>;
  82                 };
  83         };
  84
  85         soc: soc {
  86                 #address-cells = <1>;
  87                 #size-cells = <1>;
  88                 ranges;
  89                 compatible = "simple-bus";
  90
  91                 lpass@28100000 {
  92                         compatible = "qcom,lpass-cpu";
  93                         status = "disabled";
  94                         clocks = <&lcc AHBIX_CLK>,
  95                                         <&lcc MI2S_OSR_CLK>,
  96                                         <&lcc MI2S_BIT_CLK>;
  97                         clock-names = "ahbix-clk",
  98                                         "mi2s-osr-clk",
  99                                         "mi2s-bit-clk";
 100                         interrupts = <0 85 1>;
 101                         interrupt-names = "lpass-irq-lpaif";
 102                         reg = <0x28100000 0x10000>;
 103                         reg-names = "lpass-lpaif";
 104                 };
 105
 106                 qcom_pinmux: pinmux@800000 {
 107                         compatible = "qcom,ipq8064-pinctrl";
 108                         reg = <0x800000 0x4000>;
 109
 110                         gpio-controller;
 111                         #gpio-cells = <2>;
 112                         interrupt-controller;
 113                         #interrupt-cells = <2>;
 114                         interrupts = <0 16 0x4>;
 115                 };
 116
 117                 intc: interrupt-controller@2000000 {
 118                         compatible = "qcom,msm-qgic2";
 119                         interrupt-controller;
 120                         #interrupt-cells = <3>;
 121                         reg = <0x02000000 0x1000>,
 122                               <0x02002000 0x1000>;
 123                 };
 124
 125                 timer@200a000 {
 126                         compatible = "qcom,kpss-timer",
 127                                      "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
 128                         interrupts = <1 1 0x301>,
 129                                      <1 2 0x301>,
 130                                      <1 3 0x301>,
 131                                      <1 4 0x301>,
 132                                      <1 5 0x301>;
 133                         reg = <0x0200a000 0x100>;
 134                         clock-frequency = <25000000>,
 135                                           <32768>;
 136                         clocks = <&sleep_clk>;
 137                         clock-names = "sleep";
 138                         cpu-offset = <0x80000>;
 139                 };
 140
 141                 acc0: clock-controller@2088000 {
 142                         compatible = "qcom,kpss-acc-v1";
 143                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 144                 };
 145
 146                 acc1: clock-controller@2098000 {
 147                         compatible = "qcom,kpss-acc-v1";
 148                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 149                 };
 150
 151                 saw0: regulator@2089000 {
 152                         compatible = "qcom,saw2";
 153                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 154                         regulator;
 155                 };
 156
 157                 saw1: regulator@2099000 {
 158                         compatible = "qcom,saw2";
 159                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 160                         regulator;
 161                 };
 162
 163                 gsbi2: gsbi@12480000 {
 164                         compatible = "qcom,gsbi-v1.0.0";
 165                         cell-index = <2>;
 166                         reg = <0x12480000 0x100>;
 167                         clocks = <&gcc GSBI2_H_CLK>;
 168                         clock-names = "iface";
 169                         #address-cells = <1>;
 170                         #size-cells = <1>;
 171                         ranges;
 172                         status = "disabled";
 173
 174                         syscon-tcsr = <&tcsr>;
 175
 176                         serial@12490000 {
 177                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 178                                 reg = <0x12490000 0x1000>,
 179                                       <0x12480000 0x1000>;
 180                                 interrupts = <0 195 0x0>;
 181                                 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 182                                 clock-names = "core", "iface";
 183                                 status = "disabled";
 184                         };
 185
 186                         i2c@124a0000 {
 187                                 compatible = "qcom,i2c-qup-v1.1.1";
 188                                 reg = <0x124a0000 0x1000>;
 189                                 interrupts = <0 196 0>;
 190
 191                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 192                                 clock-names = "core", "iface";
 193                                 status = "disabled";
 194
 195                                 #address-cells = <1>;
 196                                 #size-cells = <0>;
 197                         };
 198
 199                 };
 200
 201                 gsbi4: gsbi@16300000 {
 202                         compatible = "qcom,gsbi-v1.0.0";
 203                         cell-index = <4>;
 204                         reg = <0x16300000 0x100>;
 205                         clocks = <&gcc GSBI4_H_CLK>;
 206                         clock-names = "iface";
 207                         #address-cells = <1>;
 208                         #size-cells = <1>;
 209                         ranges;
 210                         status = "disabled";
 211
 212                         syscon-tcsr = <&tcsr>;
 213
 214                         gsbi4_serial: serial@16340000 {
 215                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 216                                 reg = <0x16340000 0x1000>,
 217                                       <0x16300000 0x1000>;
 218                                 interrupts = <0 152 0x0>;
 219                                 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 220                                 clock-names = "core", "iface";
 221                                 status = "disabled";
 222                         };
 223
 224                         i2c@16380000 {
 225                                 compatible = "qcom,i2c-qup-v1.1.1";
 226                                 reg = <0x16380000 0x1000>;
 227                                 interrupts = <0 153 0>;
 228
 229                                 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
 230                                 clock-names = "core", "iface";
 231                                 status = "disabled";
 232
 233                                 #address-cells = <1>;
 234                                 #size-cells = <0>;
 235                         };
 236                 };
 237
 238                 gsbi5: gsbi@1a200000 {
 239                         compatible = "qcom,gsbi-v1.0.0";
 240                         cell-index = <5>;
 241                         reg = <0x1a200000 0x100>;
 242                         clocks = <&gcc GSBI5_H_CLK>;
 243                         clock-names = "iface";
 244                         #address-cells = <1>;
 245                         #size-cells = <1>;
 246                         ranges;
 247                         status = "disabled";
 248
 249                         syscon-tcsr = <&tcsr>;
 250
 251                         serial@1a240000 {
 252                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 253                                 reg = <0x1a240000 0x1000>,
 254                                       <0x1a200000 0x1000>;
 255                                 interrupts = <0 154 0x0>;
 256                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 257                                 clock-names = "core", "iface";
 258                                 status = "disabled";
 259                         };
 260
 261                         i2c@1a280000 {
 262                                 compatible = "qcom,i2c-qup-v1.1.1";
 263                                 reg = <0x1a280000 0x1000>;
 264                                 interrupts = <0 155 0>;
 265
 266                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 267                                 clock-names = "core", "iface";
 268                                 status = "disabled";
 269
 270                                 #address-cells = <1>;
 271                                 #size-cells = <0>;
 272                         };
 273
 274                         spi@1a280000 {
 275                                 compatible = "qcom,spi-qup-v1.1.1";
 276                                 reg = <0x1a280000 0x1000>;
 277                                 interrupts = <0 155 0>;
 278
 279                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 280                                 clock-names = "core", "iface";
 281                                 status = "disabled";
 282
 283                                 #address-cells = <1>;
 284                                 #size-cells = <0>;
 285                         };
 286                 };
 287
 288                 gsbi7: gsbi@16600000 {
 289                         status = "disabled";
 290                         compatible = "qcom,gsbi-v1.0.0";
 291                         cell-index = <7>;
 292                         reg = <0x16600000 0x100>;
 293                         clocks = <&gcc GSBI7_H_CLK>;
 294                         clock-names = "iface";
 295                         #address-cells = <1>;
 296                         #size-cells = <1>;
 297                         ranges;
 298                         syscon-tcsr = <&tcsr>;
 299
 300                         gsbi7_serial: serial@16640000 {
 301                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 302                                 reg = <0x16640000 0x1000>,
 303                                       <0x16600000 0x1000>;
 304                                 interrupts = <0 158 0x0>;
 305                                 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 306                                 clock-names = "core", "iface";
 307                                 status = "disabled";
 308                         };
 309                 };
 310
 311                 sata_phy: sata-phy@1b400000 {
 312                         compatible = "qcom,ipq806x-sata-phy";
 313                         reg = <0x1b400000 0x200>;
 314
 315                         clocks = <&gcc SATA_PHY_CFG_CLK>;
 316                         clock-names = "cfg";
 317
 318                         #phy-cells = <0>;
 319                         status = "disabled";
 320                 };
 321
 322                 sata@29000000 {
 323                         compatible = "qcom,ipq806x-ahci", "generic-ahci";
 324                         reg = <0x29000000 0x180>;
 325
 326                         interrupts = <0 209 0x0>;
 327
 328                         clocks = <&gcc SFAB_SATA_S_H_CLK>,
 329                                  <&gcc SATA_H_CLK>,
 330                                  <&gcc SATA_A_CLK>,
 331                                  <&gcc SATA_RXOOB_CLK>,
 332                                  <&gcc SATA_PMALIVE_CLK>;
 333                         clock-names = "slave_face", "iface", "core",
 334                                         "rxoob", "pmalive";
 335
 336                         assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
 337                         assigned-clock-rates = <100000000>, <100000000>;
 338
 339                         phys = <&sata_phy>;
 340                         phy-names = "sata-phy";
 341                         status = "disabled";
 342                 };
 343
 344                 qcom,ssbi@500000 {
 345                         compatible = "qcom,ssbi";
 346                         reg = <0x00500000 0x1000>;
 347                         qcom,controller-type = "pmic-arbiter";
 348                 };
 349
 350                 gcc: clock-controller@900000 {
 351                         compatible = "qcom,gcc-ipq8064";
 352                         reg = <0x00900000 0x4000>;
 353                         #clock-cells = <1>;
 354                         #reset-cells = <1>;
 355                 };
 356
 357                 tcsr: syscon@1a400000 {
 358                         compatible = "qcom,tcsr-ipq8064", "syscon";
 359                         reg = <0x1a400000 0x100>;
 360                 };
 361
 362                 lcc: clock-controller@28000000 {
 363                         compatible = "qcom,lcc-ipq8064";
 364                         reg = <0x28000000 0x1000>;
 365                         #clock-cells = <1>;
 366                         #reset-cells = <1>;
 367                 };
 368
 369         };
 370 };