arch/arm/boot/dts/omap5.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  * Based on "omap4.dtsi"
   8  */
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include <dt-bindings/pinctrl/omap.h>
  13
  14 / {
  15         #address-cells = <2>;
  16         #size-cells = <2>;
  17
  18         compatible = "ti,omap5";
  19         interrupt-parent = <&wakeupgen>;
  20         chosen { };
  21
  22         aliases {
  23                 i2c0 = &i2c1;
  24                 i2c1 = &i2c2;
  25                 i2c2 = &i2c3;
  26                 i2c3 = &i2c4;
  27                 i2c4 = &i2c5;
  28                 serial0 = &uart1;
  29                 serial1 = &uart2;
  30                 serial2 = &uart3;
  31                 serial3 = &uart4;
  32                 serial4 = &uart5;
  33                 serial5 = &uart6;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu0: cpu@0 {
  41                         device_type = "cpu";
  42                         compatible = "arm,cortex-a15";
  43                         reg = <0x0>;
  44
  45                         operating-points = <
  46                                 /* kHz    uV */
  47                                 1000000 1060000
  48                                 1500000 1250000
  49                         >;
  50
  51                         clocks = <&dpll_mpu_ck>;
  52                         clock-names = "cpu";
  53
  54                         clock-latency = <300000>; /* From omap-cpufreq driver */
  55
  56                         /* cooling options */
  57                         cooling-min-level = <0>;
  58                         cooling-max-level = <2>;
  59                         #cooling-cells = <2>; /* min followed by max */
  60                 };
  61                 cpu@1 {
  62                         device_type = "cpu";
  63                         compatible = "arm,cortex-a15";
  64                         reg = <0x1>;
  65                 };
  66         };
  67
  68         thermal-zones {
  69                 #include "omap4-cpu-thermal.dtsi"
  70                 #include "omap5-gpu-thermal.dtsi"
  71                 #include "omap5-core-thermal.dtsi"
  72         };
  73
  74         timer {
  75                 compatible = "arm,armv7-timer";
  76                 /* PPI secure/nonsecure IRQ */
  77                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  78                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  79                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  80                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
  81                 interrupt-parent = <&gic>;
  82         };
  83
  84         pmu {
  85                 compatible = "arm,cortex-a15-pmu";
  86                 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
  87                              <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
  88         };
  89
  90         gic: interrupt-controller@48211000 {
  91                 compatible = "arm,cortex-a15-gic";
  92                 interrupt-controller;
  93                 #interrupt-cells = <3>;
  94                 reg = <0 0x48211000 0 0x1000>,
  95                       <0 0x48212000 0 0x2000>,
  96                       <0 0x48214000 0 0x2000>,
  97                       <0 0x48216000 0 0x2000>;
  98                 interrupt-parent = <&gic>;
  99         };
 100
 101         wakeupgen: interrupt-controller@48281000 {
 102                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 103                 interrupt-controller;
 104                 #interrupt-cells = <3>;
 105                 reg = <0 0x48281000 0 0x1000>;
 106                 interrupt-parent = <&gic>;
 107         };
 108
 109         /*
 110          * The soc node represents the soc top level view. It is used for IPs
 111          * that are not memory mapped in the MPU view or for the MPU itself.
 112          */
 113         soc {
 114                 compatible = "ti,omap-infra";
 115                 mpu {
 116                         compatible = "ti,omap4-mpu";
 117                         ti,hwmods = "mpu";
 118                         sram = <&ocmcram>;
 119                 };
 120         };
 121
 122         /*
 123          * XXX: Use a flat representation of the OMAP3 interconnect.
 124          * The real OMAP interconnect network is quite complex.
 125          * Since it will not bring real advantage to represent that in DT for
 126          * the moment, just use a fake OCP bus entry to represent the whole bus
 127          * hierarchy.
 128          */
 129         ocp {
 130                 compatible = "ti,omap5-l3-noc", "simple-bus";
 131                 #address-cells = <1>;
 132                 #size-cells = <1>;
 133                 ranges = <0 0 0 0xc0000000>;
 134                 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 135                 reg = <0 0x44000000 0 0x2000>,
 136                       <0 0x44800000 0 0x3000>,
 137                       <0 0x45000000 0 0x4000>;
 138                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 139                              <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 140
 141                 l4_cfg: l4@4a000000 {
 142                         compatible = "ti,omap5-l4-cfg", "simple-bus";
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145                         ranges = <0 0x4a000000 0x22a000>;
 146
 147                         scm_core: scm@2000 {
 148                                 compatible = "ti,omap5-scm-core", "simple-bus";
 149                                 reg = <0x2000 0x1000>;
 150                                 #address-cells = <1>;
 151                                 #size-cells = <1>;
 152                                 ranges = <0 0x2000 0x800>;
 153
 154                                 scm_conf: scm_conf@0 {
 155                                         compatible = "syscon";
 156                                         reg = <0x0 0x800>;
 157                                         #address-cells = <1>;
 158                                         #size-cells = <1>;
 159                                 };
 160                         };
 161
 162                         scm_padconf_core: scm@2800 {
 163                                 compatible = "ti,omap5-scm-padconf-core",
 164                                              "simple-bus";
 165                                 #address-cells = <1>;
 166                                 #size-cells = <1>;
 167                                 ranges = <0 0x2800 0x800>;
 168
 169                                 omap5_pmx_core: pinmux@40 {
 170                                         compatible = "ti,omap5-padconf",
 171                                                      "pinctrl-single";
 172                                         reg = <0x40 0x01b6>;
 173                                         #address-cells = <1>;
 174                                         #size-cells = <0>;
 175                                         #pinctrl-cells = <1>;
 176                                         #interrupt-cells = <1>;
 177                                         interrupt-controller;
 178                                         pinctrl-single,register-width = <16>;
 179                                         pinctrl-single,function-mask = <0x7fff>;
 180                                 };
 181
 182                                 omap5_padconf_global: omap5_padconf_global@5a0 {
 183                                         compatible = "syscon",
 184                                                      "simple-bus";
 185                                         reg = <0x5a0 0xec>;
 186                                         #address-cells = <1>;
 187                                         #size-cells = <1>;
 188                                         ranges = <0 0x5a0 0xec>;
 189
 190                                         pbias_regulator: pbias_regulator@60 {
 191                                                 compatible = "ti,pbias-omap5", "ti,pbias-omap";
 192                                                 reg = <0x60 0x4>;
 193                                                 syscon = <&omap5_padconf_global>;
 194                                                 pbias_mmc_reg: pbias_mmc_omap5 {
 195                                                         regulator-name = "pbias_mmc_omap5";
 196                                                         regulator-min-microvolt = <1800000>;
 197                                                         regulator-max-microvolt = <3300000>;
 198                                                 };
 199                                         };
 200                                 };
 201                         };
 202
 203                         cm_core_aon: cm_core_aon@4000 {
 204                                 compatible = "ti,omap5-cm-core-aon";
 205                                 reg = <0x4000 0x2000>;
 206
 207                                 cm_core_aon_clocks: clocks {
 208                                         #address-cells = <1>;
 209                                         #size-cells = <0>;
 210                                 };
 211
 212                                 cm_core_aon_clockdomains: clockdomains {
 213                                 };
 214                         };
 215
 216                         cm_core: cm_core@8000 {
 217                                 compatible = "ti,omap5-cm-core";
 218                                 reg = <0x8000 0x3000>;
 219
 220                                 cm_core_clocks: clocks {
 221                                         #address-cells = <1>;
 222                                         #size-cells = <0>;
 223                                 };
 224
 225                                 cm_core_clockdomains: clockdomains {
 226                                 };
 227                         };
 228                 };
 229
 230                 l4_wkup: l4@4ae00000 {
 231                         compatible = "ti,omap5-l4-wkup", "simple-bus";
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234                         ranges = <0 0x4ae00000 0x2b000>;
 235
 236                         counter32k: counter@4000 {
 237                                 compatible = "ti,omap-counter32k";
 238                                 reg = <0x4000 0x40>;
 239                                 ti,hwmods = "counter_32k";
 240                         };
 241
 242                         prm: prm@6000 {
 243                                 compatible = "ti,omap5-prm";
 244                                 reg = <0x6000 0x3000>;
 245                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 246
 247                                 prm_clocks: clocks {
 248                                         #address-cells = <1>;
 249                                         #size-cells = <0>;
 250                                 };
 251
 252                                 prm_clockdomains: clockdomains {
 253                                 };
 254                         };
 255
 256                         scrm: scrm@a000 {
 257                                 compatible = "ti,omap5-scrm";
 258                                 reg = <0xa000 0x2000>;
 259
 260                                 scrm_clocks: clocks {
 261                                         #address-cells = <1>;
 262                                         #size-cells = <0>;
 263                                 };
 264
 265                                 scrm_clockdomains: clockdomains {
 266                                 };
 267                         };
 268
 269                         omap5_pmx_wkup: pinmux@c840 {
 270                                 compatible = "ti,omap5-padconf",
 271                                              "pinctrl-single";
 272                                 reg = <0xc840 0x003c>;
 273                                 #address-cells = <1>;
 274                                 #size-cells = <0>;
 275                                 #pinctrl-cells = <1>;
 276                                 #interrupt-cells = <1>;
 277                                 interrupt-controller;
 278                                 pinctrl-single,register-width = <16>;
 279                                 pinctrl-single,function-mask = <0x7fff>;
 280                         };
 281                 };
 282
 283                 ocmcram: ocmcram@40300000 {
 284                         compatible = "mmio-sram";
 285                         reg = <0x40300000 0x20000>; /* 128k */
 286                 };
 287
 288                 sdma: dma-controller@4a056000 {
 289                         compatible = "ti,omap4430-sdma";
 290                         reg = <0x4a056000 0x1000>;
 291                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 292                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 293                                      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 294                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 295                         #dma-cells = <1>;
 296                         dma-channels = <32>;
 297                         dma-requests = <127>;
 298                         ti,hwmods = "dma_system";
 299                 };
 300
 301                 gpio1: gpio@4ae10000 {
 302                         compatible = "ti,omap4-gpio";
 303                         reg = <0x4ae10000 0x200>;
 304                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 305                         ti,hwmods = "gpio1";
 306                         ti,gpio-always-on;
 307                         gpio-controller;
 308                         #gpio-cells = <2>;
 309                         interrupt-controller;
 310                         #interrupt-cells = <2>;
 311                 };
 312
 313                 gpio2: gpio@48055000 {
 314                         compatible = "ti,omap4-gpio";
 315                         reg = <0x48055000 0x200>;
 316                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 317                         ti,hwmods = "gpio2";
 318                         gpio-controller;
 319                         #gpio-cells = <2>;
 320                         interrupt-controller;
 321                         #interrupt-cells = <2>;
 322                 };
 323
 324                 gpio3: gpio@48057000 {
 325                         compatible = "ti,omap4-gpio";
 326                         reg = <0x48057000 0x200>;
 327                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 328                         ti,hwmods = "gpio3";
 329                         gpio-controller;
 330                         #gpio-cells = <2>;
 331                         interrupt-controller;
 332                         #interrupt-cells = <2>;
 333                 };
 334
 335                 gpio4: gpio@48059000 {
 336                         compatible = "ti,omap4-gpio";
 337                         reg = <0x48059000 0x200>;
 338                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 339                         ti,hwmods = "gpio4";
 340                         gpio-controller;
 341                         #gpio-cells = <2>;
 342                         interrupt-controller;
 343                         #interrupt-cells = <2>;
 344                 };
 345
 346                 gpio5: gpio@4805b000 {
 347                         compatible = "ti,omap4-gpio";
 348                         reg = <0x4805b000 0x200>;
 349                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 350                         ti,hwmods = "gpio5";
 351                         gpio-controller;
 352                         #gpio-cells = <2>;
 353                         interrupt-controller;
 354                         #interrupt-cells = <2>;
 355                 };
 356
 357                 gpio6: gpio@4805d000 {
 358                         compatible = "ti,omap4-gpio";
 359                         reg = <0x4805d000 0x200>;
 360                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 361                         ti,hwmods = "gpio6";
 362                         gpio-controller;
 363                         #gpio-cells = <2>;
 364                         interrupt-controller;
 365                         #interrupt-cells = <2>;
 366                 };
 367
 368                 gpio7: gpio@48051000 {
 369                         compatible = "ti,omap4-gpio";
 370                         reg = <0x48051000 0x200>;
 371                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 372                         ti,hwmods = "gpio7";
 373                         gpio-controller;
 374                         #gpio-cells = <2>;
 375                         interrupt-controller;
 376                         #interrupt-cells = <2>;
 377                 };
 378
 379                 gpio8: gpio@48053000 {
 380                         compatible = "ti,omap4-gpio";
 381                         reg = <0x48053000 0x200>;
 382                         interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 383                         ti,hwmods = "gpio8";
 384                         gpio-controller;
 385                         #gpio-cells = <2>;
 386                         interrupt-controller;
 387                         #interrupt-cells = <2>;
 388                 };
 389
 390                 gpmc: gpmc@50000000 {
 391                         compatible = "ti,omap4430-gpmc";
 392                         reg = <0x50000000 0x1000>;
 393                         #address-cells = <2>;
 394                         #size-cells = <1>;
 395                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 396                         dmas = <&sdma 4>;
 397                         dma-names = "rxtx";
 398                         gpmc,num-cs = <8>;
 399                         gpmc,num-waitpins = <4>;
 400                         ti,hwmods = "gpmc";
 401                         clocks = <&l3_iclk_div>;
 402                         clock-names = "fck";
 403                         interrupt-controller;
 404                         #interrupt-cells = <2>;
 405                         gpio-controller;
 406                         #gpio-cells = <2>;
 407                 };
 408
 409                 i2c1: i2c@48070000 {
 410                         compatible = "ti,omap4-i2c";
 411                         reg = <0x48070000 0x100>;
 412                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 413                         #address-cells = <1>;
 414                         #size-cells = <0>;
 415                         ti,hwmods = "i2c1";
 416                 };
 417
 418                 i2c2: i2c@48072000 {
 419                         compatible = "ti,omap4-i2c";
 420                         reg = <0x48072000 0x100>;
 421                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 422                         #address-cells = <1>;
 423                         #size-cells = <0>;
 424                         ti,hwmods = "i2c2";
 425                 };
 426
 427                 i2c3: i2c@48060000 {
 428                         compatible = "ti,omap4-i2c";
 429                         reg = <0x48060000 0x100>;
 430                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 431                         #address-cells = <1>;
 432                         #size-cells = <0>;
 433                         ti,hwmods = "i2c3";
 434                 };
 435
 436                 i2c4: i2c@4807a000 {
 437                         compatible = "ti,omap4-i2c";
 438                         reg = <0x4807a000 0x100>;
 439                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 440                         #address-cells = <1>;
 441                         #size-cells = <0>;
 442                         ti,hwmods = "i2c4";
 443                 };
 444
 445                 i2c5: i2c@4807c000 {
 446                         compatible = "ti,omap4-i2c";
 447                         reg = <0x4807c000 0x100>;
 448                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 449                         #address-cells = <1>;
 450                         #size-cells = <0>;
 451                         ti,hwmods = "i2c5";
 452                 };
 453
 454                 hwspinlock: spinlock@4a0f6000 {
 455                         compatible = "ti,omap4-hwspinlock";
 456                         reg = <0x4a0f6000 0x1000>;
 457                         ti,hwmods = "spinlock";
 458                         #hwlock-cells = <1>;
 459                 };
 460
 461                 mcspi1: spi@48098000 {
 462                         compatible = "ti,omap4-mcspi";
 463                         reg = <0x48098000 0x200>;
 464                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 465                         #address-cells = <1>;
 466                         #size-cells = <0>;
 467                         ti,hwmods = "mcspi1";
 468                         ti,spi-num-cs = <4>;
 469                         dmas = <&sdma 35>,
 470                                <&sdma 36>,
 471                                <&sdma 37>,
 472                                <&sdma 38>,
 473                                <&sdma 39>,
 474                                <&sdma 40>,
 475                                <&sdma 41>,
 476                                <&sdma 42>;
 477                         dma-names = "tx0", "rx0", "tx1", "rx1",
 478                                     "tx2", "rx2", "tx3", "rx3";
 479                 };
 480
 481                 mcspi2: spi@4809a000 {
 482                         compatible = "ti,omap4-mcspi";
 483                         reg = <0x4809a000 0x200>;
 484                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 485                         #address-cells = <1>;
 486                         #size-cells = <0>;
 487                         ti,hwmods = "mcspi2";
 488                         ti,spi-num-cs = <2>;
 489                         dmas = <&sdma 43>,
 490                                <&sdma 44>,
 491                                <&sdma 45>,
 492                                <&sdma 46>;
 493                         dma-names = "tx0", "rx0", "tx1", "rx1";
 494                 };
 495
 496                 mcspi3: spi@480b8000 {
 497                         compatible = "ti,omap4-mcspi";
 498                         reg = <0x480b8000 0x200>;
 499                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 500                         #address-cells = <1>;
 501                         #size-cells = <0>;
 502                         ti,hwmods = "mcspi3";
 503                         ti,spi-num-cs = <2>;
 504                         dmas = <&sdma 15>, <&sdma 16>;
 505                         dma-names = "tx0", "rx0";
 506                 };
 507
 508                 mcspi4: spi@480ba000 {
 509                         compatible = "ti,omap4-mcspi";
 510                         reg = <0x480ba000 0x200>;
 511                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 512                         #address-cells = <1>;
 513                         #size-cells = <0>;
 514                         ti,hwmods = "mcspi4";
 515                         ti,spi-num-cs = <1>;
 516                         dmas = <&sdma 70>, <&sdma 71>;
 517                         dma-names = "tx0", "rx0";
 518                 };
 519
 520                 uart1: serial@4806a000 {
 521                         compatible = "ti,omap4-uart";
 522                         reg = <0x4806a000 0x100>;
 523                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 524                         ti,hwmods = "uart1";
 525                         clock-frequency = <48000000>;
 526                 };
 527
 528                 uart2: serial@4806c000 {
 529                         compatible = "ti,omap4-uart";
 530                         reg = <0x4806c000 0x100>;
 531                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 532                         ti,hwmods = "uart2";
 533                         clock-frequency = <48000000>;
 534                 };
 535
 536                 uart3: serial@48020000 {
 537                         compatible = "ti,omap4-uart";
 538                         reg = <0x48020000 0x100>;
 539                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 540                         ti,hwmods = "uart3";
 541                         clock-frequency = <48000000>;
 542                 };
 543
 544                 uart4: serial@4806e000 {
 545                         compatible = "ti,omap4-uart";
 546                         reg = <0x4806e000 0x100>;
 547                         interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 548                         ti,hwmods = "uart4";
 549                         clock-frequency = <48000000>;
 550                 };
 551
 552                 uart5: serial@48066000 {
 553                         compatible = "ti,omap4-uart";
 554                         reg = <0x48066000 0x100>;
 555                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 556                         ti,hwmods = "uart5";
 557                         clock-frequency = <48000000>;
 558                 };
 559
 560                 uart6: serial@48068000 {
 561                         compatible = "ti,omap4-uart";
 562                         reg = <0x48068000 0x100>;
 563                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 564                         ti,hwmods = "uart6";
 565                         clock-frequency = <48000000>;
 566                 };
 567
 568                 mmc1: mmc@4809c000 {
 569                         compatible = "ti,omap4-hsmmc";
 570                         reg = <0x4809c000 0x400>;
 571                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 572                         ti,hwmods = "mmc1";
 573                         ti,dual-volt;
 574                         ti,needs-special-reset;
 575                         dmas = <&sdma 61>, <&sdma 62>;
 576                         dma-names = "tx", "rx";
 577                         pbias-supply = <&pbias_mmc_reg>;
 578                 };
 579
 580                 mmc2: mmc@480b4000 {
 581                         compatible = "ti,omap4-hsmmc";
 582                         reg = <0x480b4000 0x400>;
 583                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 584                         ti,hwmods = "mmc2";
 585                         ti,needs-special-reset;
 586                         dmas = <&sdma 47>, <&sdma 48>;
 587                         dma-names = "tx", "rx";
 588                 };
 589
 590                 mmc3: mmc@480ad000 {
 591                         compatible = "ti,omap4-hsmmc";
 592                         reg = <0x480ad000 0x400>;
 593                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 594                         ti,hwmods = "mmc3";
 595                         ti,needs-special-reset;
 596                         dmas = <&sdma 77>, <&sdma 78>;
 597                         dma-names = "tx", "rx";
 598                 };
 599
 600                 mmc4: mmc@480d1000 {
 601                         compatible = "ti,omap4-hsmmc";
 602                         reg = <0x480d1000 0x400>;
 603                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 604                         ti,hwmods = "mmc4";
 605                         ti,needs-special-reset;
 606                         dmas = <&sdma 57>, <&sdma 58>;
 607                         dma-names = "tx", "rx";
 608                 };
 609
 610                 mmc5: mmc@480d5000 {
 611                         compatible = "ti,omap4-hsmmc";
 612                         reg = <0x480d5000 0x400>;
 613                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 614                         ti,hwmods = "mmc5";
 615                         ti,needs-special-reset;
 616                         dmas = <&sdma 59>, <&sdma 60>;
 617                         dma-names = "tx", "rx";
 618                 };
 619
 620                 mmu_dsp: mmu@4a066000 {
 621                         compatible = "ti,omap4-iommu";
 622                         reg = <0x4a066000 0x100>;
 623                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 624                         ti,hwmods = "mmu_dsp";
 625                         #iommu-cells = <0>;
 626                 };
 627
 628                 mmu_ipu: mmu@55082000 {
 629                         compatible = "ti,omap4-iommu";
 630                         reg = <0x55082000 0x100>;
 631                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 632                         ti,hwmods = "mmu_ipu";
 633                         #iommu-cells = <0>;
 634                         ti,iommu-bus-err-back;
 635                 };
 636
 637                 keypad: keypad@4ae1c000 {
 638                         compatible = "ti,omap4-keypad";
 639                         reg = <0x4ae1c000 0x400>;
 640                         ti,hwmods = "kbd";
 641                 };
 642
 643                 mcpdm: mcpdm@40132000 {
 644                         compatible = "ti,omap4-mcpdm";
 645                         reg = <0x40132000 0x7f>, /* MPU private access */
 646                               <0x49032000 0x7f>; /* L3 Interconnect */
 647                         reg-names = "mpu", "dma";
 648                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 649                         ti,hwmods = "mcpdm";
 650                         dmas = <&sdma 65>,
 651                                <&sdma 66>;
 652                         dma-names = "up_link", "dn_link";
 653                         status = "disabled";
 654                 };
 655
 656                 dmic: dmic@4012e000 {
 657                         compatible = "ti,omap4-dmic";
 658                         reg = <0x4012e000 0x7f>, /* MPU private access */
 659                               <0x4902e000 0x7f>; /* L3 Interconnect */
 660                         reg-names = "mpu", "dma";
 661                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 662                         ti,hwmods = "dmic";
 663                         dmas = <&sdma 67>;
 664                         dma-names = "up_link";
 665                         status = "disabled";
 666                 };
 667
 668                 mcbsp1: mcbsp@40122000 {
 669                         compatible = "ti,omap4-mcbsp";
 670                         reg = <0x40122000 0xff>, /* MPU private access */
 671                               <0x49022000 0xff>; /* L3 Interconnect */
 672                         reg-names = "mpu", "dma";
 673                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 674                         interrupt-names = "common";
 675                         ti,buffer-size = <128>;
 676                         ti,hwmods = "mcbsp1";
 677                         dmas = <&sdma 33>,
 678                                <&sdma 34>;
 679                         dma-names = "tx", "rx";
 680                         status = "disabled";
 681                 };
 682
 683                 mcbsp2: mcbsp@40124000 {
 684                         compatible = "ti,omap4-mcbsp";
 685                         reg = <0x40124000 0xff>, /* MPU private access */
 686                               <0x49024000 0xff>; /* L3 Interconnect */
 687                         reg-names = "mpu", "dma";
 688                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 689                         interrupt-names = "common";
 690                         ti,buffer-size = <128>;
 691                         ti,hwmods = "mcbsp2";
 692                         dmas = <&sdma 17>,
 693                                <&sdma 18>;
 694                         dma-names = "tx", "rx";
 695                         status = "disabled";
 696                 };
 697
 698                 mcbsp3: mcbsp@40126000 {
 699                         compatible = "ti,omap4-mcbsp";
 700                         reg = <0x40126000 0xff>, /* MPU private access */
 701                               <0x49026000 0xff>; /* L3 Interconnect */
 702                         reg-names = "mpu", "dma";
 703                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 704                         interrupt-names = "common";
 705                         ti,buffer-size = <128>;
 706                         ti,hwmods = "mcbsp3";
 707                         dmas = <&sdma 19>,
 708                                <&sdma 20>;
 709                         dma-names = "tx", "rx";
 710                         status = "disabled";
 711                 };
 712
 713                 mailbox: mailbox@4a0f4000 {
 714                         compatible = "ti,omap4-mailbox";
 715                         reg = <0x4a0f4000 0x200>;
 716                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 717                         ti,hwmods = "mailbox";
 718                         #mbox-cells = <1>;
 719                         ti,mbox-num-users = <3>;
 720                         ti,mbox-num-fifos = <8>;
 721                         mbox_ipu: mbox_ipu {
 722                                 ti,mbox-tx = <0 0 0>;
 723                                 ti,mbox-rx = <1 0 0>;
 724                         };
 725                         mbox_dsp: mbox_dsp {
 726                                 ti,mbox-tx = <3 0 0>;
 727                                 ti,mbox-rx = <2 0 0>;
 728                         };
 729                 };
 730
 731                 timer1: timer@4ae18000 {
 732                         compatible = "ti,omap5430-timer";
 733                         reg = <0x4ae18000 0x80>;
 734                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 735                         ti,hwmods = "timer1";
 736                         ti,timer-alwon;
 737                 };
 738
 739                 timer2: timer@48032000 {
 740                         compatible = "ti,omap5430-timer";
 741                         reg = <0x48032000 0x80>;
 742                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 743                         ti,hwmods = "timer2";
 744                 };
 745
 746                 timer3: timer@48034000 {
 747                         compatible = "ti,omap5430-timer";
 748                         reg = <0x48034000 0x80>;
 749                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 750                         ti,hwmods = "timer3";
 751                 };
 752
 753                 timer4: timer@48036000 {
 754                         compatible = "ti,omap5430-timer";
 755                         reg = <0x48036000 0x80>;
 756                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 757                         ti,hwmods = "timer4";
 758                 };
 759
 760                 timer5: timer@40138000 {
 761                         compatible = "ti,omap5430-timer";
 762                         reg = <0x40138000 0x80>,
 763                               <0x49038000 0x80>;
 764                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 765                         ti,hwmods = "timer5";
 766                         ti,timer-dsp;
 767                         ti,timer-pwm;
 768                 };
 769
 770                 timer6: timer@4013a000 {
 771                         compatible = "ti,omap5430-timer";
 772                         reg = <0x4013a000 0x80>,
 773                               <0x4903a000 0x80>;
 774                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 775                         ti,hwmods = "timer6";
 776                         ti,timer-dsp;
 777                         ti,timer-pwm;
 778                 };
 779
 780                 timer7: timer@4013c000 {
 781                         compatible = "ti,omap5430-timer";
 782                         reg = <0x4013c000 0x80>,
 783                               <0x4903c000 0x80>;
 784                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 785                         ti,hwmods = "timer7";
 786                         ti,timer-dsp;
 787                 };
 788
 789                 timer8: timer@4013e000 {
 790                         compatible = "ti,omap5430-timer";
 791                         reg = <0x4013e000 0x80>,
 792                               <0x4903e000 0x80>;
 793                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 794                         ti,hwmods = "timer8";
 795                         ti,timer-dsp;
 796                         ti,timer-pwm;
 797                 };
 798
 799                 timer9: timer@4803e000 {
 800                         compatible = "ti,omap5430-timer";
 801                         reg = <0x4803e000 0x80>;
 802                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 803                         ti,hwmods = "timer9";
 804                         ti,timer-pwm;
 805                 };
 806
 807                 timer10: timer@48086000 {
 808                         compatible = "ti,omap5430-timer";
 809                         reg = <0x48086000 0x80>;
 810                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 811                         ti,hwmods = "timer10";
 812                         ti,timer-pwm;
 813                 };
 814
 815                 timer11: timer@48088000 {
 816                         compatible = "ti,omap5430-timer";
 817                         reg = <0x48088000 0x80>;
 818                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 819                         ti,hwmods = "timer11";
 820                         ti,timer-pwm;
 821                 };
 822
 823                 wdt2: wdt@4ae14000 {
 824                         compatible = "ti,omap5-wdt", "ti,omap3-wdt";
 825                         reg = <0x4ae14000 0x80>;
 826                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 827                         ti,hwmods = "wd_timer2";
 828                 };
 829
 830                 dmm@4e000000 {
 831                         compatible = "ti,omap5-dmm";
 832                         reg = <0x4e000000 0x800>;
 833                         interrupts = <0 113 0x4>;
 834                         ti,hwmods = "dmm";
 835                 };
 836
 837                 emif1: emif@4c000000 {
 838                         compatible      = "ti,emif-4d5";
 839                         ti,hwmods       = "emif1";
 840                         ti,no-idle-on-init;
 841                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 842                         reg = <0x4c000000 0x400>;
 843                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 844                         hw-caps-read-idle-ctrl;
 845                         hw-caps-ll-interface;
 846                         hw-caps-temp-alert;
 847                 };
 848
 849                 emif2: emif@4d000000 {
 850                         compatible      = "ti,emif-4d5";
 851                         ti,hwmods       = "emif2";
 852                         ti,no-idle-on-init;
 853                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 854                         reg = <0x4d000000 0x400>;
 855                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 856                         hw-caps-read-idle-ctrl;
 857                         hw-caps-ll-interface;
 858                         hw-caps-temp-alert;
 859                 };
 860
 861                 usb3: omap_dwc3@4a020000 {
 862                         compatible = "ti,dwc3";
 863                         ti,hwmods = "usb_otg_ss";
 864                         reg = <0x4a020000 0x10000>;
 865                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 866                         #address-cells = <1>;
 867                         #size-cells = <1>;
 868                         utmi-mode = <2>;
 869                         ranges;
 870                         dwc3: dwc3@4a030000 {
 871                                 compatible = "snps,dwc3";
 872                                 reg = <0x4a030000 0x10000>;
 873                                 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 874                                              <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 875                                              <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 876                                 interrupt-names = "peripheral",
 877                                                   "host",
 878                                                   "otg";
 879                                 phys = <&usb2_phy>, <&usb3_phy>;
 880                                 phy-names = "usb2-phy", "usb3-phy";
 881                                 dr_mode = "peripheral";
 882                         };
 883                 };
 884
 885                 ocp2scp@4a080000 {
 886                         compatible = "ti,omap-ocp2scp";
 887                         #address-cells = <1>;
 888                         #size-cells = <1>;
 889                         reg = <0x4a080000 0x20>;
 890                         ranges;
 891                         ti,hwmods = "ocp2scp1";
 892                         usb2_phy: usb2phy@4a084000 {
 893                                 compatible = "ti,omap-usb2";
 894                                 reg = <0x4a084000 0x7c>;
 895                                 syscon-phy-power = <&scm_conf 0x300>;
 896                                 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 897                                 clock-names = "wkupclk", "refclk";
 898                                 #phy-cells = <0>;
 899                         };
 900
 901                         usb3_phy: usb3phy@4a084400 {
 902                                 compatible = "ti,omap-usb3";
 903                                 reg = <0x4a084400 0x80>,
 904                                       <0x4a084800 0x64>,
 905                                       <0x4a084c00 0x40>;
 906                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 907                                 syscon-phy-power = <&scm_conf 0x370>;
 908                                 clocks = <&usb_phy_cm_clk32k>,
 909                                          <&sys_clkin>,
 910                                          <&usb_otg_ss_refclk960m>;
 911                                 clock-names =   "wkupclk",
 912                                                 "sysclk",
 913                                                 "refclk";
 914                                 #phy-cells = <0>;
 915                         };
 916                 };
 917
 918                 usbhstll: usbhstll@4a062000 {
 919                         compatible = "ti,usbhs-tll";
 920                         reg = <0x4a062000 0x1000>;
 921                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 922                         ti,hwmods = "usb_tll_hs";
 923                 };
 924
 925                 usbhshost: usbhshost@4a064000 {
 926                         compatible = "ti,usbhs-host";
 927                         reg = <0x4a064000 0x800>;
 928                         ti,hwmods = "usb_host_hs";
 929                         #address-cells = <1>;
 930                         #size-cells = <1>;
 931                         ranges;
 932                         clocks = <&l3init_60m_fclk>,
 933                                  <&xclk60mhsp1_ck>,
 934                                  <&xclk60mhsp2_ck>;
 935                         clock-names = "refclk_60m_int",
 936                                       "refclk_60m_ext_p1",
 937                                       "refclk_60m_ext_p2";
 938
 939                         usbhsohci: ohci@4a064800 {
 940                                 compatible = "ti,ohci-omap3";
 941                                 reg = <0x4a064800 0x400>;
 942                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 943                         };
 944
 945                         usbhsehci: ehci@4a064c00 {
 946                                 compatible = "ti,ehci-omap";
 947                                 reg = <0x4a064c00 0x400>;
 948                                 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 949                         };
 950                 };
 951
 952                 bandgap: bandgap@4a0021e0 {
 953                         reg = <0x4a0021e0 0xc
 954                                0x4a00232c 0xc
 955                                0x4a002380 0x2c
 956                                0x4a0023C0 0x3c>;
 957                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 958                         compatible = "ti,omap5430-bandgap";
 959
 960                         #thermal-sensor-cells = <1>;
 961                 };
 962
 963                 /* OCP2SCP3 */
 964                 ocp2scp@4a090000 {
 965                         compatible = "ti,omap-ocp2scp";
 966                         #address-cells = <1>;
 967                         #size-cells = <1>;
 968                         reg = <0x4a090000 0x20>;
 969                         ranges;
 970                         ti,hwmods = "ocp2scp3";
 971                         sata_phy: phy@4a096000 {
 972                                 compatible = "ti,phy-pipe3-sata";
 973                                 reg = <0x4A096000 0x80>, /* phy_rx */
 974                                       <0x4A096400 0x64>, /* phy_tx */
 975                                       <0x4A096800 0x40>; /* pll_ctrl */
 976                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 977                                 syscon-phy-power = <&scm_conf 0x374>;
 978                                 clocks = <&sys_clkin>, <&sata_ref_clk>;
 979                                 clock-names = "sysclk", "refclk";
 980                                 #phy-cells = <0>;
 981                         };
 982                 };
 983
 984                 sata: sata@4a141100 {
 985                         compatible = "snps,dwc-ahci";
 986                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
 987                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 988                         phys = <&sata_phy>;
 989                         phy-names = "sata-phy";
 990                         clocks = <&sata_ref_clk>;
 991                         ti,hwmods = "sata";
 992                         ports-implemented = <0x1>;
 993                 };
 994
 995                 dss: dss@58000000 {
 996                         compatible = "ti,omap5-dss";
 997                         reg = <0x58000000 0x80>;
 998                         status = "disabled";
 999                         ti,hwmods = "dss_core";
1000                         clocks = <&dss_dss_clk>;
1001                         clock-names = "fck";
1002                         #address-cells = <1>;
1003                         #size-cells = <1>;
1004                         ranges;
1005
1006                         dispc@58001000 {
1007                                 compatible = "ti,omap5-dispc";
1008                                 reg = <0x58001000 0x1000>;
1009                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1010                                 ti,hwmods = "dss_dispc";
1011                                 clocks = <&dss_dss_clk>;
1012                                 clock-names = "fck";
1013                         };
1014
1015                         rfbi: encoder@58002000  {
1016                                 compatible = "ti,omap5-rfbi";
1017                                 reg = <0x58002000 0x100>;
1018                                 status = "disabled";
1019                                 ti,hwmods = "dss_rfbi";
1020                                 clocks = <&dss_dss_clk>, <&l3_iclk_div>;
1021                                 clock-names = "fck", "ick";
1022                         };
1023
1024                         dsi1: encoder@58004000 {
1025                                 compatible = "ti,omap5-dsi";
1026                                 reg = <0x58004000 0x200>,
1027                                       <0x58004200 0x40>,
1028                                       <0x58004300 0x40>;
1029                                 reg-names = "proto", "phy", "pll";
1030                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1031                                 status = "disabled";
1032                                 ti,hwmods = "dss_dsi1";
1033                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1034                                 clock-names = "fck", "sys_clk";
1035                         };
1036
1037                         dsi2: encoder@58005000 {
1038                                 compatible = "ti,omap5-dsi";
1039                                 reg = <0x58009000 0x200>,
1040                                       <0x58009200 0x40>,
1041                                       <0x58009300 0x40>;
1042                                 reg-names = "proto", "phy", "pll";
1043                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1044                                 status = "disabled";
1045                                 ti,hwmods = "dss_dsi2";
1046                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1047                                 clock-names = "fck", "sys_clk";
1048                         };
1049
1050                         hdmi: encoder@58060000 {
1051                                 compatible = "ti,omap5-hdmi";
1052                                 reg = <0x58040000 0x200>,
1053                                       <0x58040200 0x80>,
1054                                       <0x58040300 0x80>,
1055                                       <0x58060000 0x19000>;
1056                                 reg-names = "wp", "pll", "phy", "core";
1057                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1058                                 status = "disabled";
1059                                 ti,hwmods = "dss_hdmi";
1060                                 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1061                                 clock-names = "fck", "sys_clk";
1062                                 dmas = <&sdma 76>;
1063                                 dma-names = "audio_tx";
1064                         };
1065                 };
1066
1067                 abb_mpu: regulator-abb-mpu {
1068                         compatible = "ti,abb-v2";
1069                         regulator-name = "abb_mpu";
1070                         #address-cells = <0>;
1071                         #size-cells = <0>;
1072                         clocks = <&sys_clkin>;
1073                         ti,settling-time = <50>;
1074                         ti,clock-cycles = <16>;
1075
1076                         reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
1077                               <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
1078                         reg-names = "base-address", "int-address",
1079                                     "efuse-address", "ldo-address";
1080                         ti,tranxdone-status-mask = <0x80>;
1081                         /* LDOVBBMPU_MUX_CTRL */
1082                         ti,ldovbb-override-mask = <0x400>;
1083                         /* LDOVBBMPU_VSET_OUT */
1084                         ti,ldovbb-vset-mask = <0x1F>;
1085
1086                         /*
1087                          * NOTE: only FBB mode used but actual vset will
1088                          * determine final biasing
1089                          */
1090                         ti,abb_info = <
1091                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1092                         1060000         0       0x0     0 0x02000000 0x01F00000
1093                         1250000         0       0x4     0 0x02000000 0x01F00000
1094                         >;
1095                 };
1096
1097                 abb_mm: regulator-abb-mm {
1098                         compatible = "ti,abb-v2";
1099                         regulator-name = "abb_mm";
1100                         #address-cells = <0>;
1101                         #size-cells = <0>;
1102                         clocks = <&sys_clkin>;
1103                         ti,settling-time = <50>;
1104                         ti,clock-cycles = <16>;
1105
1106                         reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
1107                               <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
1108                         reg-names = "base-address", "int-address",
1109                                     "efuse-address", "ldo-address";
1110                         ti,tranxdone-status-mask = <0x80000000>;
1111                         /* LDOVBBMM_MUX_CTRL */
1112                         ti,ldovbb-override-mask = <0x400>;
1113                         /* LDOVBBMM_VSET_OUT */
1114                         ti,ldovbb-vset-mask = <0x1F>;
1115
1116                         /*
1117                          * NOTE: only FBB mode used but actual vset will
1118                          * determine final biasing
1119                          */
1120                         ti,abb_info = <
1121                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1122                         1025000         0       0x0     0 0x02000000 0x01F00000
1123                         1120000         0       0x4     0 0x02000000 0x01F00000
1124                         >;
1125                 };
1126         };
1127 };
1128
1129 &cpu_thermal {
1130         polling-delay = <500>; /* milliseconds */
1131         coefficients = <65 (-1791)>;
1132 };
1133
1134 /include/ "omap54xx-clocks.dtsi"
1135
1136 &gpu_thermal {
1137         coefficients = <117 (-2992)>;
1138 };
1139
1140 &core_thermal {
1141         coefficients = <0 2000>;
1142 };