arch/arm/boot/dts/kirkwood-openrd-client.dts

   1 /*
   2  * Marvell OpenRD Client Board Description
   3  *
   4  * Andrew Lunn <andrew@lunn.ch>
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  *
  10  * This file contains the definitions that are specific to OpenRD
  11  * client variant of the Marvell Kirkwood Development Board.
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "kirkwood-openrd.dtsi"
  17
  18 / {
  19         model = "OpenRD Client";
  20         compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  21
  22         ocp@f1000000 {
  23                 audio-controller@a0000 {
  24                         status = "okay";
  25                 };
  26                 i2c@11000 {
  27                         status = "okay";
  28                         clock-frequency = <400000>;
  29
  30                         cs42l51: cs42l51@4a {
  31                                 compatible = "cirrus,cs42l51";
  32                                 reg = <0x4a>;
  33                                 #sound-dai-cells = <0>;
  34                         };
  35                 };
  36         };
  37
  38         sound {
  39                 compatible = "simple-audio-card";
  40                 simple-audio-card,format = "i2s";
  41                 simple-audio-card,mclk-fs = <256>;
  42
  43                 simple-audio-card,cpu {
  44                         sound-dai = <&audio0 0>;
  45                 };
  46
  47                 simple-audio-card,codec {
  48                         sound-dai = <&cs42l51>;
  49                 };
  50         };
  51 };
  52
  53 &mdio {
  54         status = "okay";
  55
  56         ethphy0: ethernet-phy@8 {
  57                 reg = <8>;
  58         };
  59         ethphy1: ethernet-phy@24 {
  60                 reg = <24>;
  61         };
  62 };
  63
  64 &eth0 {
  65         status = "okay";
  66         ethernet0-port@0 {
  67                 phy-handle = <&ethphy0>;
  68         };
  69 };
  70
  71 &eth1 {
  72         status = "okay";
  73         ethernet1-port@0 {
  74                 phy-handle = <&ethphy1>;
  75         };
  76 };
  77