arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

   1 /*
   2  * Copyright 2013 Data Modul AG
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include "imx6q.dtsi"
  16
  17 / {
  18         model = "Data Modul eDM-QMX6 Board";
  19         compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
  20
  21         chosen {
  22                 stdout-path = &uart2;
  23         };
  24
  25         aliases {
  26                 gpio7 = &stmpe_gpio1;
  27                 gpio8 = &stmpe_gpio2;
  28                 stmpe-i2c0 = &stmpe1;
  29                 stmpe-i2c1 = &stmpe2;
  30         };
  31
  32         memory {
  33                 reg = <0x10000000 0x80000000>;
  34         };
  35
  36         regulators {
  37                 compatible = "simple-bus";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 reg_3p3v: regulator@0 {
  42                         compatible = "regulator-fixed";
  43                         reg = <0>;
  44                         regulator-name = "3P3V";
  45                         regulator-min-microvolt = <3300000>;
  46                         regulator-max-microvolt = <3300000>;
  47                         regulator-always-on;
  48                 };
  49
  50                 reg_usb_otg_switch: regulator@1 {
  51                         compatible = "regulator-fixed";
  52                         reg = <1>;
  53                         regulator-name = "usb_otg_switch";
  54                         regulator-min-microvolt = <5000000>;
  55                         regulator-max-microvolt = <5000000>;
  56                         gpio = <&gpio7 12 0>;
  57                         regulator-boot-on;
  58                         regulator-always-on;
  59                 };
  60
  61                 reg_usb_host1: regulator@2 {
  62                         compatible = "regulator-fixed";
  63                         reg = <2>;
  64                         regulator-name = "usb_host1_en";
  65                         regulator-min-microvolt = <3300000>;
  66                         regulator-max-microvolt = <3300000>;
  67                         gpio = <&gpio3 31 0>;
  68                         enable-active-high;
  69                 };
  70         };
  71
  72         gpio-leds {
  73                 compatible = "gpio-leds";
  74
  75                 led-blue {
  76                         label = "blue";
  77                         gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
  78                         linux,default-trigger = "heartbeat";
  79                 };
  80
  81                 led-green {
  82                         label = "green";
  83                         gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 led-pink {
  87                         label = "pink";
  88                         gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 led-red {
  92                         label = "red";
  93                         gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
  94                 };
  95         };
  96 };
  97
  98 &ecspi5 {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_ecspi5>;
 101         fsl,spi-num-chipselects = <1>;
 102         cs-gpios = <&gpio1 12 0>;
 103         status = "okay";
 104
 105         flash: m25p80@0 {
 106                 compatible = "m25p80";
 107                 spi-max-frequency = <40000000>;
 108                 reg = <0>;
 109         };
 110 };
 111
 112 &fec {
 113         pinctrl-names = "default";
 114         pinctrl-0 = <&pinctrl_enet>;
 115         phy-mode = "rgmii";
 116         phy-reset-gpios = <&gpio3 23 0>;
 117         phy-supply = <&vgen2_1v2_eth>;
 118         status = "okay";
 119 };
 120
 121 &i2c2 {
 122         clock-frequency = <100000>;
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_i2c2
 125                      &pinctrl_stmpe1
 126                      &pinctrl_stmpe2
 127                      &pinctrl_pfuze>;
 128         status = "okay";
 129
 130         pmic: pfuze100@08 {
 131                 compatible = "fsl,pfuze100";
 132                 reg = <0x08>;
 133                 interrupt-parent = <&gpio3>;
 134                 interrupts = <20 8>;
 135
 136                 regulators {
 137                         sw1a_reg: sw1ab {
 138                                 regulator-min-microvolt = <300000>;
 139                                 regulator-max-microvolt = <1875000>;
 140                                 regulator-boot-on;
 141                                 regulator-always-on;
 142                         };
 143
 144                         sw1c_reg: sw1c {
 145                                 regulator-min-microvolt = <300000>;
 146                                 regulator-max-microvolt = <1875000>;
 147                                 regulator-boot-on;
 148                                 regulator-always-on;
 149                         };
 150
 151                         sw2_reg: sw2 {
 152                                 regulator-min-microvolt = <800000>;
 153                                 regulator-max-microvolt = <3300000>;
 154                                 regulator-boot-on;
 155                                 regulator-always-on;
 156                         };
 157
 158                         sw3a_reg: sw3a {
 159                                 regulator-min-microvolt = <400000>;
 160                                 regulator-max-microvolt = <1975000>;
 161                                 regulator-boot-on;
 162                                 regulator-always-on;
 163                         };
 164
 165                         sw3b_reg: sw3b {
 166                                 regulator-min-microvolt = <400000>;
 167                                 regulator-max-microvolt = <1975000>;
 168                                 regulator-boot-on;
 169                                 regulator-always-on;
 170                         };
 171
 172                         sw4_reg: sw4 {
 173                                 regulator-min-microvolt = <400000>;
 174                                 regulator-max-microvolt = <1975000>;
 175                                 regulator-always-on;
 176                         };
 177
 178                         swbst_reg: swbst {
 179                                 regulator-min-microvolt = <5000000>;
 180                                 regulator-max-microvolt = <5150000>;
 181                                 regulator-always-on;
 182                         };
 183
 184                         snvs_reg: vsnvs {
 185                                 regulator-min-microvolt = <1000000>;
 186                                 regulator-max-microvolt = <3000000>;
 187                                 regulator-boot-on;
 188                                 regulator-always-on;
 189                         };
 190
 191                         vref_reg: vrefddr {
 192                                 regulator-boot-on;
 193                                 regulator-always-on;
 194                         };
 195
 196                         vgen1_reg: vgen1 {
 197                                 regulator-min-microvolt = <800000>;
 198                                 regulator-max-microvolt = <1550000>;
 199                         };
 200
 201                         vgen2_1v2_eth: vgen2 {
 202                                 regulator-min-microvolt = <800000>;
 203                                 regulator-max-microvolt = <1550000>;
 204                         };
 205
 206                         vdd_high_in: vgen3 {
 207                                 regulator-min-microvolt = <1800000>;
 208                                 regulator-max-microvolt = <3300000>;
 209                                 regulator-boot-on;
 210                                 regulator-always-on;
 211                         };
 212
 213                         vgen4_reg: vgen4 {
 214                                 regulator-min-microvolt = <1800000>;
 215                                 regulator-max-microvolt = <3300000>;
 216                                 regulator-always-on;
 217                         };
 218
 219                         vgen5_reg: vgen5 {
 220                                 regulator-min-microvolt = <1800000>;
 221                                 regulator-max-microvolt = <3300000>;
 222                                 regulator-always-on;
 223                         };
 224
 225                         vgen6_reg: vgen6 {
 226                                 regulator-min-microvolt = <1800000>;
 227                                 regulator-max-microvolt = <3300000>;
 228                                 regulator-always-on;
 229                         };
 230                 };
 231         };
 232
 233         stmpe1: stmpe1601@40 {
 234                 compatible = "st,stmpe1601";
 235                 reg = <0x40>;
 236                 interrupts = <30 0>;
 237                 interrupt-parent = <&gpio3>;
 238                 vcc-supply = <&sw2_reg>;
 239                 vio-supply = <&sw2_reg>;
 240
 241                 stmpe_gpio1: stmpe_gpio {
 242                         #gpio-cells = <2>;
 243                         compatible = "st,stmpe-gpio";
 244                 };
 245         };
 246
 247         stmpe2: stmpe1601@44 {
 248                 compatible = "st,stmpe1601";
 249                 reg = <0x44>;
 250                 interrupts = <2 0>;
 251                 interrupt-parent = <&gpio5>;
 252                 vcc-supply = <&sw2_reg>;
 253                 vio-supply = <&sw2_reg>;
 254
 255                 stmpe_gpio2: stmpe_gpio {
 256                         #gpio-cells = <2>;
 257                         compatible = "st,stmpe-gpio";
 258                 };
 259         };
 260
 261         temp1: ad7414@4c {
 262                 compatible = "ad,ad7414";
 263                 reg = <0x4c>;
 264         };
 265
 266         temp2: ad7414@4d {
 267                 compatible = "ad,ad7414";
 268                 reg = <0x4d>;
 269         };
 270
 271         rtc: m41t62@68 {
 272                 compatible = "stm,m41t62";
 273                 reg = <0x68>;
 274         };
 275 };
 276
 277 &iomuxc {
 278         pinctrl-names = "default";
 279         pinctrl-0 = <&pinctrl_hog>;
 280
 281         imx6q-dmo-edmqmx6 {
 282                 pinctrl_hog: hoggrp {
 283                         fsl,pins = <
 284                                 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
 285                                 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 286                         >;
 287                 };
 288
 289                 pinctrl_ecspi5: ecspi5rp-1 {
 290                         fsl,pins = <
 291                                 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO        0x80000000
 292                                 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI         0x80000000
 293                                 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK         0x80000000
 294                                 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12         0x80000000
 295                         >;
 296                 };
 297
 298                 pinctrl_enet: enetgrp {
 299                         fsl,pins = <
 300                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 301                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 302                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 303                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 304                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 305                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 306                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 307                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 308                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 309                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 310                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 311                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 312                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 313                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 314                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 315                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 316                         >;
 317                 };
 318
 319                 pinctrl_i2c2: i2c2grp {
 320                         fsl,pins = <
 321                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 322                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 323                         >;
 324                 };
 325
 326                 pinctrl_pfuze: pfuze100grp1 {
 327                         fsl,pins = <
 328                                 MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x80000000
 329                         >;
 330                 };
 331
 332                 pinctrl_stmpe1: stmpe1grp {
 333                         fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 334                 };
 335
 336                 pinctrl_stmpe2: stmpe2grp {
 337                         fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
 338                 };
 339
 340                 pinctrl_uart1: uart1grp {
 341                         fsl,pins = <
 342                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 343                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 344                         >;
 345                 };
 346
 347                 pinctrl_uart2: uart2grp {
 348                         fsl,pins = <
 349                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 350                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 351                         >;
 352                 };
 353
 354                 pinctrl_usbotg: usbotggrp {
 355                         fsl,pins = <
 356                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 357                         >;
 358                 };
 359
 360                 pinctrl_usdhc3: usdhc3grp {
 361                         fsl,pins = <
 362                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 363                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 364                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 365                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 366                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 367                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 368                         >;
 369                 };
 370
 371                 pinctrl_usdhc4: usdhc4grp {
 372                         fsl,pins = <
 373                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 374                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 375                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 376                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 377                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 378                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 379                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 380                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 381                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 382                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 383                         >;
 384                 };
 385         };
 386 };
 387
 388 &sata {
 389         status = "okay";
 390 };
 391
 392 &uart1 {
 393         pinctrl-names = "default";
 394         pinctrl-0 = <&pinctrl_uart1>;
 395         status = "okay";
 396 };
 397
 398 &uart2 {
 399         pinctrl-names = "default";
 400         pinctrl-0 = <&pinctrl_uart2>;
 401         status = "okay";
 402 };
 403
 404 &usbh1 {
 405         vbus-supply = <&reg_usb_host1>;
 406         disable-over-current;
 407         dr_mode = "host";
 408         status = "okay";
 409 };
 410
 411 &usbotg {
 412         pinctrl-names = "default";
 413         pinctrl-0 = <&pinctrl_usbotg>;
 414         disable-over-current;
 415         status = "okay";
 416 };
 417
 418 &usdhc3 {
 419         pinctrl-names = "default";
 420         pinctrl-0 = <&pinctrl_usdhc3>;
 421         vmmc-supply = <&reg_3p3v>;
 422         status = "okay";
 423 };
 424
 425 &usdhc4 {
 426         pinctrl-names = "default";
 427         pinctrl-0 = <&pinctrl_usdhc4>;
 428         vmmc-supply = <&reg_3p3v>;
 429         non-removable;
 430         bus-width = <8>;
 431         status = "okay";
 432 };