arch/arm/boot/dts/dm814x.dtsi

   1 /*
   2  * This file is licensed under the terms of the GNU General Public License
   3  * version 2.  This program is licensed "as is" without any warranty of any
   4  * kind, whether express or implied.
   5  */
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/pinctrl/dm814x.h>
   9
  10 / {
  11         compatible = "ti,dm814";
  12         interrupt-parent = <&intc>;
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         chosen { };
  16
  17         aliases {
  18                 i2c0 = &i2c1;
  19                 i2c1 = &i2c2;
  20                 serial0 = &uart1;
  21                 serial1 = &uart2;
  22                 serial2 = &uart3;
  23                 ethernet0 = &cpsw_emac0;
  24                 ethernet1 = &cpsw_emac1;
  25                 usb0 = &usb0;
  26                 usb1 = &usb1;
  27                 phy0 = &usb0_phy;
  28                 phy1 = &usb1_phy;
  29         };
  30
  31         cpus {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 cpu@0 {
  35                         compatible = "arm,cortex-a8";
  36                         device_type = "cpu";
  37                         reg = <0>;
  38                 };
  39         };
  40
  41         pmu {
  42                 compatible = "arm,cortex-a8-pmu";
  43                 interrupts = <3>;
  44         };
  45
  46         /*
  47          * The soc node represents the soc top level view. It is used for IPs
  48          * that are not memory mapped in the MPU view or for the MPU itself.
  49          */
  50         soc {
  51                 compatible = "ti,omap-infra";
  52                 mpu {
  53                         compatible = "ti,omap3-mpu";
  54                         ti,hwmods = "mpu";
  55                 };
  56         };
  57
  58         ocp {
  59                 compatible = "simple-bus";
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 ranges;
  63                 ti,hwmods = "l3_main";
  64
  65                 usb: usb@47400000 {
  66                         compatible = "ti,am33xx-usb";
  67                         reg = <0x47400000 0x1000>;
  68                         ranges;
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71                         ti,hwmods = "usb_otg_hs";
  72
  73                         usb0_phy: usb-phy@47401300 {
  74                                 compatible = "ti,am335x-usb-phy";
  75                                 reg = <0x47401300 0x100>;
  76                                 reg-names = "phy";
  77                                 ti,ctrl_mod = <&usb_ctrl_mod>;
  78                                 #phy-cells = <0>;
  79                         };
  80
  81                         usb0: usb@47401000 {
  82                                 compatible = "ti,musb-am33xx";
  83                                 reg = <0x47401400 0x400
  84                                        0x47401000 0x200>;
  85                                 reg-names = "mc", "control";
  86
  87                                 interrupts = <18>;
  88                                 interrupt-names = "mc";
  89                                 dr_mode = "otg";
  90                                 mentor,multipoint = <1>;
  91                                 mentor,num-eps = <16>;
  92                                 mentor,ram-bits = <12>;
  93                                 mentor,power = <500>;
  94                                 phys = <&usb0_phy>;
  95
  96                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
  97                                         &cppi41dma  2 0 &cppi41dma  3 0
  98                                         &cppi41dma  4 0 &cppi41dma  5 0
  99                                         &cppi41dma  6 0 &cppi41dma  7 0
 100                                         &cppi41dma  8 0 &cppi41dma  9 0
 101                                         &cppi41dma 10 0 &cppi41dma 11 0
 102                                         &cppi41dma 12 0 &cppi41dma 13 0
 103                                         &cppi41dma 14 0 &cppi41dma  0 1
 104                                         &cppi41dma  1 1 &cppi41dma  2 1
 105                                         &cppi41dma  3 1 &cppi41dma  4 1
 106                                         &cppi41dma  5 1 &cppi41dma  6 1
 107                                         &cppi41dma  7 1 &cppi41dma  8 1
 108                                         &cppi41dma  9 1 &cppi41dma 10 1
 109                                         &cppi41dma 11 1 &cppi41dma 12 1
 110                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 111                                 dma-names =
 112                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 113                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 114                                         "rx14", "rx15",
 115                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 116                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 117                                         "tx14", "tx15";
 118                         };
 119
 120                         usb1: usb@47401800 {
 121                                 compatible = "ti,musb-am33xx";
 122                                 reg = <0x47401c00 0x400
 123                                         0x47401800 0x200>;
 124                                 reg-names = "mc", "control";
 125                                 interrupts = <19>;
 126                                 interrupt-names = "mc";
 127                                 dr_mode = "otg";
 128                                 mentor,multipoint = <1>;
 129                                 mentor,num-eps = <16>;
 130                                 mentor,ram-bits = <12>;
 131                                 mentor,power = <500>;
 132                                 phys = <&usb1_phy>;
 133
 134                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 135                                         &cppi41dma 17 0 &cppi41dma 18 0
 136                                         &cppi41dma 19 0 &cppi41dma 20 0
 137                                         &cppi41dma 21 0 &cppi41dma 22 0
 138                                         &cppi41dma 23 0 &cppi41dma 24 0
 139                                         &cppi41dma 25 0 &cppi41dma 26 0
 140                                         &cppi41dma 27 0 &cppi41dma 28 0
 141                                         &cppi41dma 29 0 &cppi41dma 15 1
 142                                         &cppi41dma 16 1 &cppi41dma 17 1
 143                                         &cppi41dma 18 1 &cppi41dma 19 1
 144                                         &cppi41dma 20 1 &cppi41dma 21 1
 145                                         &cppi41dma 22 1 &cppi41dma 23 1
 146                                         &cppi41dma 24 1 &cppi41dma 25 1
 147                                         &cppi41dma 26 1 &cppi41dma 27 1
 148                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 149                                 dma-names =
 150                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 151                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 152                                         "rx14", "rx15",
 153                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 154                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 155                                         "tx14", "tx15";
 156                         };
 157
 158                         cppi41dma: dma-controller@47402000 {
 159                                 compatible = "ti,am3359-cppi41";
 160                                 reg =  <0x47400000 0x1000
 161                                         0x47402000 0x1000
 162                                         0x47403000 0x1000
 163                                         0x47404000 0x4000>;
 164                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 165                                 interrupts = <17>;
 166                                 interrupt-names = "glue";
 167                                 #dma-cells = <2>;
 168                                 #dma-channels = <30>;
 169                                 #dma-requests = <256>;
 170                         };
 171                 };
 172
 173                 /*
 174                  * See TRM "Table 1-317. L4LS Instance Summary" for hints.
 175                  * It shows the module target agent registers though, so the
 176                  * actual device is typically 0x1000 before the target agent
 177                  * except in cases where the module is larger than 0x1000.
 178                  */
 179                 l4ls: l4ls@48000000 {
 180                         compatible = "ti,dm814-l4ls", "simple-bus";
 181                         #address-cells = <1>;
 182                         #size-cells = <1>;
 183                         ranges = <0 0x48000000 0x2000000>;
 184
 185                         i2c1: i2c@28000 {
 186                                 compatible = "ti,omap4-i2c";
 187                                 #address-cells = <1>;
 188                                 #size-cells = <0>;
 189                                 ti,hwmods = "i2c1";
 190                                 reg = <0x28000 0x1000>;
 191                                 interrupts = <70>;
 192                         };
 193
 194                         elm: elm@80000 {
 195                                 compatible = "ti,814-elm";
 196                                 ti,hwmods = "elm";
 197                                 reg = <0x80000 0x2000>;
 198                                 interrupts = <4>;
 199                         };
 200
 201                         gpio1: gpio@32000 {
 202                                 compatible = "ti,omap4-gpio";
 203                                 ti,hwmods = "gpio1";
 204                                 ti,gpio-always-on;
 205                                 reg = <0x32000 0x2000>;
 206                                 interrupts = <96>;
 207                                 gpio-controller;
 208                                 #gpio-cells = <2>;
 209                                 interrupt-controller;
 210                                 #interrupt-cells = <2>;
 211                         };
 212
 213                         gpio2: gpio@4c000 {
 214                                 compatible = "ti,omap4-gpio";
 215                                 ti,hwmods = "gpio2";
 216                                 ti,gpio-always-on;
 217                                 reg = <0x4c000 0x2000>;
 218                                 interrupts = <98>;
 219                                 gpio-controller;
 220                                 #gpio-cells = <2>;
 221                                 interrupt-controller;
 222                                 #interrupt-cells = <2>;
 223                         };
 224
 225                         gpio3: gpio@1ac000 {
 226                                 compatible = "ti,omap4-gpio";
 227                                 ti,hwmods = "gpio3";
 228                                 ti,gpio-always-on;
 229                                 reg = <0x1ac000 0x2000>;
 230                                 interrupts = <32>;
 231                                 gpio-controller;
 232                                 #gpio-cells = <2>;
 233                                 interrupt-controller;
 234                                 #interrupt-cells = <2>;
 235                         };
 236
 237                         gpio4: gpio@1ae000 {
 238                                 compatible = "ti,omap4-gpio";
 239                                 ti,hwmods = "gpio4";
 240                                 ti,gpio-always-on;
 241                                 reg = <0x1ae000 0x2000>;
 242                                 interrupts = <62>;
 243                                 gpio-controller;
 244                                 #gpio-cells = <2>;
 245                                 interrupt-controller;
 246                                 #interrupt-cells = <2>;
 247                         };
 248
 249                         i2c2: i2c@2a000 {
 250                                 compatible = "ti,omap4-i2c";
 251                                 #address-cells = <1>;
 252                                 #size-cells = <0>;
 253                                 ti,hwmods = "i2c2";
 254                                 reg = <0x2a000 0x1000>;
 255                                 interrupts = <71>;
 256                         };
 257
 258                         mcspi1: spi@30000 {
 259                                 compatible = "ti,omap4-mcspi";
 260                                 reg = <0x30000 0x1000>;
 261                                 #address-cells = <1>;
 262                                 #size-cells = <0>;
 263                                 interrupts = <65>;
 264                                 ti,spi-num-cs = <4>;
 265                                 ti,hwmods = "mcspi1";
 266                                 dmas = <&edma 16 0 &edma 17 0
 267                                         &edma 18 0 &edma 19 0
 268                                         &edma 20 0 &edma 21 0
 269                                         &edma 22 0 &edma 23 0>;
 270
 271                                 dma-names = "tx0", "rx0", "tx1", "rx1",
 272                                         "tx2", "rx2", "tx3", "rx3";
 273                         };
 274
 275                         mcspi2: spi@1a0000 {
 276                                 compatible = "ti,omap4-mcspi";
 277                                 reg = <0x1a0000 0x1000>;
 278                                 #address-cells = <1>;
 279                                 #size-cells = <0>;
 280                                 interrupts = <125>;
 281                                 ti,spi-num-cs = <4>;
 282                                 ti,hwmods = "mcspi2";
 283                                 dmas = <&edma 42 0 &edma 43 0
 284                                         &edma 44 0 &edma 45 0>;
 285                                 dma-names = "tx0", "rx0", "tx1", "rx1";
 286                         };
 287
 288                         /* Board must configure dmas with edma_xbar for EDMA */
 289                         mcspi3: spi@1a2000 {
 290                                 compatible = "ti,omap4-mcspi";
 291                                 reg = <0x1a2000 0x1000>;
 292                                 #address-cells = <1>;
 293                                 #size-cells = <0>;
 294                                 interrupts = <126>;
 295                                 ti,spi-num-cs = <4>;
 296                                 ti,hwmods = "mcspi3";
 297                         };
 298
 299                         mcspi4: spi@1a4000 {
 300                                 compatible = "ti,omap4-mcspi";
 301                                 reg = <0x1a4000 0x1000>;
 302                                 #address-cells = <1>;
 303                                 #size-cells = <0>;
 304                                 interrupts = <127>;
 305                                 ti,spi-num-cs = <4>;
 306                                 ti,hwmods = "mcspi4";
 307                         };
 308
 309                         timer1: timer@2e000 {
 310                                 compatible = "ti,dm814-timer";
 311                                 reg = <0x2e000 0x2000>;
 312                                 interrupts = <67>;
 313                                 ti,hwmods = "timer1";
 314                                 ti,timer-alwon;
 315                                 clocks = <&timer1_fck>;
 316                                 clock-names = "fck";
 317                         };
 318
 319                         uart1: uart@20000 {
 320                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 321                                 ti,hwmods = "uart1";
 322                                 reg = <0x20000 0x2000>;
 323                                 clock-frequency = <48000000>;
 324                                 interrupts = <72>;
 325                                 dmas = <&edma 26 0 &edma 27 0>;
 326                                 dma-names = "tx", "rx";
 327                         };
 328
 329                         uart2: uart@22000 {
 330                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 331                                 ti,hwmods = "uart2";
 332                                 reg = <0x22000 0x2000>;
 333                                 clock-frequency = <48000000>;
 334                                 interrupts = <73>;
 335                                 dmas = <&edma 28 0 &edma 29 0>;
 336                                 dma-names = "tx", "rx";
 337                         };
 338
 339                         uart3: uart@24000 {
 340                                 compatible = "ti,am3352-uart", "ti,omap3-uart";
 341                                 ti,hwmods = "uart3";
 342                                 reg = <0x24000 0x2000>;
 343                                 clock-frequency = <48000000>;
 344                                 interrupts = <74>;
 345                                 dmas = <&edma 30 0 &edma 31 0>;
 346                                 dma-names = "tx", "rx";
 347                         };
 348
 349                         timer2: timer@40000 {
 350                                 compatible = "ti,dm814-timer";
 351                                 reg = <0x40000 0x2000>;
 352                                 interrupts = <68>;
 353                                 ti,hwmods = "timer2";
 354                                 clocks = <&timer2_fck>;
 355                                 clock-names = "fck";
 356                         };
 357
 358                         timer3: timer@42000 {
 359                                 compatible = "ti,dm814-timer";
 360                                 reg = <0x42000 0x2000>;
 361                                 interrupts = <69>;
 362                                 ti,hwmods = "timer3";
 363                         };
 364
 365                         mmc1: mmc@60000 {
 366                                 compatible = "ti,omap4-hsmmc";
 367                                 ti,hwmods = "mmc1";
 368                                 dmas = <&edma 24 0
 369                                         &edma 25 0>;
 370                                 dma-names = "tx", "rx";
 371                                 interrupts = <64>;
 372                                 interrupt-parent = <&intc>;
 373                                 reg = <0x60000 0x1000>;
 374                         };
 375
 376                         rtc: rtc@c0000 {
 377                                 compatible = "ti,am3352-rtc", "ti,da830-rtc";
 378                                 reg = <0xc0000 0x1000>;
 379                                 interrupts = <75 76>;
 380                                 ti,hwmods = "rtc";
 381                         };
 382
 383                         mmc2: mmc@1d8000 {
 384                                 compatible = "ti,omap4-hsmmc";
 385                                 ti,hwmods = "mmc2";
 386                                 dmas = <&edma 2 0
 387                                         &edma 3 0>;
 388                                 dma-names = "tx", "rx";
 389                                 interrupts = <28>;
 390                                 interrupt-parent = <&intc>;
 391                                 reg = <0x1d8000 0x1000>;
 392                         };
 393
 394                         control: control@140000 {
 395                                 compatible = "ti,dm814-scm", "simple-bus";
 396                                 reg = <0x140000 0x20000>;
 397                                 #address-cells = <1>;
 398                                 #size-cells = <1>;
 399                                 ranges = <0 0x140000 0x20000>;
 400
 401                                 scm_conf: scm_conf@0 {
 402                                         compatible = "syscon", "simple-bus";
 403                                         reg = <0x0 0x800>;
 404                                         #address-cells = <1>;
 405                                         #size-cells = <1>;
 406                                         ranges = <0 0 0x800>;
 407
 408                                         scm_clocks: clocks {
 409                                                 #address-cells = <1>;
 410                                                 #size-cells = <0>;
 411                                         };
 412
 413                                         scm_clockdomains: clockdomains {
 414                                         };
 415                                 };
 416
 417                                 usb_ctrl_mod: control@620 {
 418                                         compatible = "ti,am335x-usb-ctrl-module";
 419                                         reg = <0x620 0x10
 420                                                 0x648 0x4>;
 421                                         reg-names = "phy_ctrl", "wakeup";
 422                                 };
 423
 424                                 edma_xbar: dma-router@f90 {
 425                                         compatible = "ti,am335x-edma-crossbar";
 426                                         reg = <0xf90 0x40>;
 427                                         #dma-cells = <3>;
 428                                         dma-requests = <32>;
 429                                         dma-masters = <&edma>;
 430                                 };
 431
 432                                 /*
 433                                  * Note that silicon revision 2.1 and older
 434                                  * require input enabled (bit 18 set) for all
 435                                  * 3.3V I/Os to avoid cumulative hardware damage.
 436                                  * For more info, see errata advisory 2.1.87.
 437                                  * We leave bit 18 out of function-mask and rely
 438                                  * on the bootloader for it.
 439                                  */
 440                                 pincntl: pinmux@800 {
 441                                         compatible = "pinctrl-single";
 442                                         reg = <0x800 0x438>;
 443                                         #address-cells = <1>;
 444                                         #size-cells = <0>;
 445                                         #pinctrl-cells = <1>;
 446                                         pinctrl-single,register-width = <32>;
 447                                         pinctrl-single,function-mask = <0x307ff>;
 448                                 };
 449
 450                                 usb1_phy: usb-phy@1b00 {
 451                                         compatible = "ti,am335x-usb-phy";
 452                                         reg = <0x1b00 0x100>;
 453                                         reg-names = "phy";
 454                                         ti,ctrl_mod = <&usb_ctrl_mod>;
 455                                         #phy-cells = <0>;
 456                                 };
 457                         };
 458
 459                         prcm: prcm@180000 {
 460                                 compatible = "ti,dm814-prcm", "simple-bus";
 461                                 reg = <0x180000 0x2000>;
 462                                 #address-cells = <1>;
 463                                 #size-cells = <1>;
 464                                 ranges = <0 0x180000 0x2000>;
 465
 466                                 prcm_clocks: clocks {
 467                                         #address-cells = <1>;
 468                                         #size-cells = <0>;
 469                                 };
 470
 471                                 prcm_clockdomains: clockdomains {
 472                                 };
 473                         };
 474
 475                         /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
 476                         pllss: pllss@1c5000 {
 477                                 compatible = "ti,dm814-pllss", "simple-bus";
 478                                 reg = <0x1c5000 0x1000>;
 479                                 #address-cells = <1>;
 480                                 #size-cells = <1>;
 481                                 ranges = <0 0x1c5000 0x1000>;
 482
 483                                 pllss_clocks: clocks {
 484                                         #address-cells = <1>;
 485                                         #size-cells = <0>;
 486                                 };
 487
 488                                 pllss_clockdomains: clockdomains {
 489                                 };
 490                         };
 491
 492                         wdt1: wdt@1c7000 {
 493                                 compatible = "ti,omap3-wdt";
 494                                 ti,hwmods = "wd_timer";
 495                                 reg = <0x1c7000 0x1000>;
 496                                 interrupts = <91>;
 497                         };
 498                 };
 499
 500                 intc: interrupt-controller@48200000 {
 501                         compatible = "ti,dm814-intc";
 502                         interrupt-controller;
 503                         #interrupt-cells = <1>;
 504                         reg = <0x48200000 0x1000>;
 505                 };
 506
 507                 /* Board must configure evtmux with edma_xbar for EDMA */
 508                 mmc3: mmc@47810000 {
 509                         compatible = "ti,omap4-hsmmc";
 510                         ti,hwmods = "mmc3";
 511                         interrupts = <29>;
 512                         interrupt-parent = <&intc>;
 513                         reg = <0x47810000 0x1000>;
 514                 };
 515
 516                 edma: edma@49000000 {
 517                         compatible = "ti,edma3-tpcc";
 518                         ti,hwmods = "tpcc";
 519                         reg =   <0x49000000 0x10000>;
 520                         reg-names = "edma3_cc";
 521                         interrupts = <12 13 14>;
 522                         interrupt-names = "edma3_ccint", "edma3_mperr",
 523                                           "edma3_ccerrint";
 524                         dma-requests = <64>;
 525                         #dma-cells = <2>;
 526
 527                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 528                                    <&edma_tptc2 3>, <&edma_tptc3 0>;
 529
 530                         ti,edma-memcpy-channels = <20 21>;
 531                 };
 532
 533                 edma_tptc0: tptc@49800000 {
 534                         compatible = "ti,edma3-tptc";
 535                         ti,hwmods = "tptc0";
 536                         reg =   <0x49800000 0x100000>;
 537                         interrupts = <112>;
 538                         interrupt-names = "edma3_tcerrint";
 539                 };
 540
 541                 edma_tptc1: tptc@49900000 {
 542                         compatible = "ti,edma3-tptc";
 543                         ti,hwmods = "tptc1";
 544                         reg =   <0x49900000 0x100000>;
 545                         interrupts = <113>;
 546                         interrupt-names = "edma3_tcerrint";
 547                 };
 548
 549                 edma_tptc2: tptc@49a00000 {
 550                         compatible = "ti,edma3-tptc";
 551                         ti,hwmods = "tptc2";
 552                         reg =   <0x49a00000 0x100000>;
 553                         interrupts = <114>;
 554                         interrupt-names = "edma3_tcerrint";
 555                 };
 556
 557                 edma_tptc3: tptc@49b00000 {
 558                         compatible = "ti,edma3-tptc";
 559                         ti,hwmods = "tptc3";
 560                         reg =   <0x49b00000 0x100000>;
 561                         interrupts = <115>;
 562                         interrupt-names = "edma3_tcerrint";
 563                 };
 564
 565                 /* See TRM "Table 1-318. L4HS Instance Summary" */
 566                 l4hs: l4hs@4a000000 {
 567                         compatible = "ti,dm814-l4hs", "simple-bus";
 568                         #address-cells = <1>;
 569                         #size-cells = <1>;
 570                         ranges = <0 0x4a000000 0x1b4040>;
 571                 };
 572
 573                 /* REVISIT: Move to live under l4hs once driver is fixed */
 574                 mac: ethernet@4a100000 {
 575                         compatible = "ti,cpsw";
 576                         ti,hwmods = "cpgmac0";
 577                         clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 578                         clock-names = "fck", "cpts";
 579                         cpdma_channels = <8>;
 580                         ale_entries = <1024>;
 581                         bd_ram_size = <0x2000>;
 582                         mac_control = <0x20>;
 583                         slaves = <2>;
 584                         active_slave = <0>;
 585                         cpts_clock_mult = <0x80000000>;
 586                         cpts_clock_shift = <29>;
 587                         reg = <0x4a100000 0x800
 588                                0x4a100900 0x100>;
 589                         #address-cells = <1>;
 590                         #size-cells = <1>;
 591                         interrupt-parent = <&intc>;
 592                         /*
 593                          * c0_rx_thresh_pend
 594                          * c0_rx_pend
 595                          * c0_tx_pend
 596                          * c0_misc_pend
 597                          */
 598                         interrupts = <40 41 42 43>;
 599                         ranges;
 600                         syscon = <&scm_conf>;
 601
 602                         davinci_mdio: mdio@4a100800 {
 603                                 compatible = "ti,davinci_mdio";
 604                                 #address-cells = <1>;
 605                                 #size-cells = <0>;
 606                                 ti,hwmods = "davinci_mdio";
 607                                 bus_freq = <1000000>;
 608                                 reg = <0x4a100800 0x100>;
 609                         };
 610
 611                         cpsw_emac0: slave@4a100200 {
 612                                 /* Filled in by U-Boot */
 613                                 mac-address = [ 00 00 00 00 00 00 ];
 614                         };
 615
 616                         cpsw_emac1: slave@4a100300 {
 617                                 /* Filled in by U-Boot */
 618                                 mac-address = [ 00 00 00 00 00 00 ];
 619                         };
 620
 621                         phy_sel: cpsw-phy-sel@48140650 {
 622                                 compatible = "ti,am3352-cpsw-phy-sel";
 623                                 reg= <0x48140650 0x4>;
 624                                 reg-names = "gmii-sel";
 625                         };
 626                 };
 627
 628                 gpmc: gpmc@50000000 {
 629                         compatible = "ti,am3352-gpmc";
 630                         ti,hwmods = "gpmc";
 631                         ti,no-idle-on-init;
 632                         reg = <0x50000000 0x2000>;
 633                         interrupts = <100>;
 634                         gpmc,num-cs = <7>;
 635                         gpmc,num-waitpins = <2>;
 636                         #address-cells = <2>;
 637                         #size-cells = <1>;
 638                         interrupt-controller;
 639                         #interrupt-cells = <2>;
 640                         gpio-controller;
 641                         #gpio-cells = <2>;
 642                 };
 643         };
 644 };
 645
 646 #include "dm814x-clocks.dtsi"