arch/arm/boot/dts/db8500.dtsi

   1 /*
   2  * Copyright 2012 Linaro Ltd
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         soc-u9500 {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 compatible = "stericsson,db8500";
  19                 interrupt-parent = <&intc>;
  20                 ranges;
  21
  22                 intc: interrupt-controller@a0411000 {
  23                         compatible = "arm,cortex-a9-gic";
  24                         #interrupt-cells = <3>;
  25                         #address-cells = <1>;
  26                         interrupt-controller;
  27                         reg = <0xa0411000 0x1000>,
  28                               <0xa0410100 0x100>;
  29                 };
  30
  31                 L2: l2-cache {
  32                         compatible = "arm,pl310-cache";
  33                         reg = <0xa0412000 0x1000>;
  34                         interrupts = <0 13 4>;
  35                         cache-unified;
  36                         cache-level = <2>;
  37                 };
  38
  39                 pmu {
  40                         compatible = "arm,cortex-a9-pmu";
  41                         interrupts = <0 7 0x4>;
  42                 };
  43
  44                 timer@a0410600 {
  45                         compatible = "arm,cortex-a9-twd-timer";
  46                         reg = <0xa0410600 0x20>;
  47                         interrupts = <1 13 0x304>;
  48                 };
  49
  50                 rtc@80154000 {
  51                         compatible = "stericsson,db8500-rtc";
  52                         reg = <0x80154000 0x1000>;
  53                         interrupts = <0 18 0x4>;
  54                 };
  55
  56                 gpio0: gpio@8012e000 {
  57                         compatible = "stericsson,db8500-gpio",
  58                                 "st,nomadik-gpio";
  59                         reg =  <0x8012e000 0x80>;
  60                         interrupts = <0 119 0x4>;
  61                         supports-sleepmode;
  62                         gpio-controller;
  63                         #gpio-cells = <2>;
  64                         gpio-bank = <0>;
  65                 };
  66
  67                 gpio1: gpio@8012e080 {
  68                         compatible = "stericsson,db8500-gpio",
  69                                 "st,nomadik-gpio";
  70                         reg =  <0x8012e080 0x80>;
  71                         interrupts = <0 120 0x4>;
  72                         supports-sleepmode;
  73                         gpio-controller;
  74                         #gpio-cells = <2>;
  75                         gpio-bank = <1>;
  76                 };
  77
  78                 gpio2: gpio@8000e000 {
  79                         compatible = "stericsson,db8500-gpio",
  80                                 "st,nomadik-gpio";
  81                         reg =  <0x8000e000 0x80>;
  82                         interrupts = <0 121 0x4>;
  83                         supports-sleepmode;
  84                         gpio-controller;
  85                         #gpio-cells = <2>;
  86                         gpio-bank = <2>;
  87                 };
  88
  89                 gpio3: gpio@8000e080 {
  90                         compatible = "stericsson,db8500-gpio",
  91                                 "st,nomadik-gpio";
  92                         reg =  <0x8000e080 0x80>;
  93                         interrupts = <0 122 0x4>;
  94                         supports-sleepmode;
  95                         gpio-controller;
  96                         #gpio-cells = <2>;
  97                         gpio-bank = <3>;
  98                 };
  99
 100                 gpio4: gpio@8000e100 {
 101                         compatible = "stericsson,db8500-gpio",
 102                                 "st,nomadik-gpio";
 103                         reg =  <0x8000e100 0x80>;
 104                         interrupts = <0 123 0x4>;
 105                         supports-sleepmode;
 106                         gpio-controller;
 107                         #gpio-cells = <2>;
 108                         gpio-bank = <4>;
 109                 };
 110
 111                 gpio5: gpio@8000e180 {
 112                         compatible = "stericsson,db8500-gpio",
 113                                 "st,nomadik-gpio";
 114                         reg =  <0x8000e180 0x80>;
 115                         interrupts = <0 124 0x4>;
 116                         supports-sleepmode;
 117                         gpio-controller;
 118                         #gpio-cells = <2>;
 119                         gpio-bank = <5>;
 120                 };
 121
 122                 gpio6: gpio@8011e000 {
 123                         compatible = "stericsson,db8500-gpio",
 124                                 "st,nomadik-gpio";
 125                         reg =  <0x8011e000 0x80>;
 126                         interrupts = <0 125 0x4>;
 127                         supports-sleepmode;
 128                         gpio-controller;
 129                         #gpio-cells = <2>;
 130                         gpio-bank = <6>;
 131                 };
 132
 133                 gpio7: gpio@8011e080 {
 134                         compatible = "stericsson,db8500-gpio",
 135                                 "st,nomadik-gpio";
 136                         reg =  <0x8011e080 0x80>;
 137                         interrupts = <0 126 0x4>;
 138                         supports-sleepmode;
 139                         gpio-controller;
 140                         #gpio-cells = <2>;
 141                         gpio-bank = <7>;
 142                 };
 143
 144                 gpio8: gpio@a03fe000 {
 145                         compatible = "stericsson,db8500-gpio",
 146                                 "st,nomadik-gpio";
 147                         reg =  <0xa03fe000 0x80>;
 148                         interrupts = <0 127 0x4>;
 149                         supports-sleepmode;
 150                         gpio-controller;
 151                         #gpio-cells = <2>;
 152                         gpio-bank = <8>;
 153                 };
 154
 155                 usb@a03e0000 {
 156                         compatible = "stericsson,db8500-musb",
 157                                 "mentor,musb";
 158                         reg = <0xa03e0000 0x10000>;
 159                         interrupts = <0 23 0x4>;
 160                 };
 161
 162                 dma-controller@801C0000 {
 163                         compatible = "stericsson,db8500-dma40",
 164                                         "stericsson,dma40";
 165                         reg = <0x801C0000 0x1000 0x40010000 0x800>;
 166                         interrupts = <0 25 0x4>;
 167                 };
 168
 169                 prcmu@80157000 {
 170                         compatible = "stericsson,db8500-prcmu";
 171                         reg = <0x80157000 0x1000>;
 172                         interrupts = <46 47>;
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         ranges;
 176
 177                                 prcmu-timer-4@80157450 {
 178                                 compatible = "stericsson,db8500-prcmu-timer-4";
 179                                 reg = <0x80157450 0xC>;
 180                         };
 181
 182                         ab8500@5 {
 183                                 compatible = "stericsson,ab8500";
 184                                 reg = <5>; /* mailbox 5 is i2c */
 185                                 interrupts = <0 40 0x4>;
 186                         };
 187                 };
 188
 189                 i2c@80004000 {
 190                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 191                         reg = <0x80004000 0x1000>;
 192                         interrupts = <0 21 0x4>;
 193                         #address-cells = <1>;
 194                         #size-cells = <0>;
 195                 };
 196
 197                 i2c@80122000 {
 198                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 199                         reg = <0x80122000 0x1000>;
 200                         interrupts = <0 22 0x4>;
 201                         #address-cells = <1>;
 202                         #size-cells = <0>;
 203                 };
 204
 205                 i2c@80128000 {
 206                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 207                         reg = <0x80128000 0x1000>;
 208                         interrupts = <0 55 0x4>;
 209                         #address-cells = <1>;
 210                         #size-cells = <0>;
 211                 };
 212
 213                 i2c@80110000 {
 214                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 215                         reg = <0x80110000 0x1000>;
 216                         interrupts = <0 12 0x4>;
 217                         #address-cells = <1>;
 218                         #size-cells = <0>;
 219                 };
 220
 221                 i2c@8012a000 {
 222                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 223                         reg = <0x8012a000 0x1000>;
 224                         interrupts = <0 51 0x4>;
 225                         #address-cells = <1>;
 226                         #size-cells = <0>;
 227                 };
 228
 229                 ssp@80002000 {
 230                         compatible = "arm,pl022", "arm,primecell";
 231                         reg = <80002000 0x1000>;
 232                         interrupts = <0 14 0x4>;
 233                         #address-cells = <1>;
 234                         #size-cells = <0>;
 235                         status = "disabled";
 236
 237                         // Add one of these for each child device
 238                         cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
 239
 240                 };
 241
 242                 uart@80120000 {
 243                         compatible = "arm,pl011", "arm,primecell";
 244                         reg = <0x80120000 0x1000>;
 245                         interrupts = <0 11 0x4>;
 246                         status = "disabled";
 247                 };
 248                 uart@80121000 {
 249                         compatible = "arm,pl011", "arm,primecell";
 250                         reg = <0x80121000 0x1000>;
 251                         interrupts = <0 19 0x4>;
 252                         status = "disabled";
 253                 };
 254                 uart@80007000 {
 255                         compatible = "arm,pl011", "arm,primecell";
 256                         reg = <0x80007000 0x1000>;
 257                         interrupts = <0 26 0x4>;
 258                         status = "disabled";
 259                 };
 260
 261                 sdi@80126000 {
 262                         compatible = "arm,pl18x", "arm,primecell";
 263                         reg = <0x80126000 0x1000>;
 264                         interrupts = <0 60 0x4>;
 265                         status = "disabled";
 266                 };
 267                 sdi@80118000 {
 268                         compatible = "arm,pl18x", "arm,primecell";
 269                         reg = <0x80118000 0x1000>;
 270                         interrupts = <0 50 0x4>;
 271                         status = "disabled";
 272                 };
 273                 sdi@80005000 {
 274                         compatible = "arm,pl18x", "arm,primecell";
 275                         reg = <0x80005000 0x1000>;
 276                         interrupts = <0 41 0x4>;
 277                         status = "disabled";
 278                 };
 279                 sdi@80119000 {
 280                         compatible = "arm,pl18x", "arm,primecell";
 281                         reg = <0x80119000 0x1000>;
 282                         interrupts = <0 59 0x4>;
 283                         status = "disabled";
 284                 };
 285                 sdi@80114000 {
 286                         compatible = "arm,pl18x", "arm,primecell";
 287                         reg = <0x80114000 0x1000>;
 288                         interrupts = <0 99 0x4>;
 289                         status = "disabled";
 290                 };
 291                 sdi@80008000 {
 292                         compatible = "arm,pl18x", "arm,primecell";
 293                         reg = <0x80114000 0x1000>;
 294                         interrupts = <0 100 0x4>;
 295                         status = "disabled";
 296                 };
 297
 298                 external-bus@50000000 {
 299                         compatible = "simple-bus";
 300                         reg = <0x50000000 0x4000000>;
 301                         #address-cells = <1>;
 302                         #size-cells = <1>;
 303                         ranges = <0 0x50000000 0x4000000>;
 304                         status = "disabled";
 305                 };
 306         };
 307 };