Documentation/devicetree/bindings/rtc/isil,isl1219.txt

   1 Intersil ISL1219 I2C RTC/Alarm chip with event in
   2
   3 ISL1219 has additional pins EVIN and #EVDET for tamper detection.
   4
   5 Required properties supported by the device:
   6
   7  - "compatible": must be "isil,isl1219"
   8  - "reg": I2C bus address of the device
   9
  10 Optional properties:
  11
  12  - "interrupt-names": list which may contains "irq" and "evdet"
  13  - "interrupts": list of interrupts for "irq" and "evdet"
  14  - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified
  15                      value for proper operation.
  16
  17
  18 Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
  19  and #EVDET pin connected to SoC gpio2 pin 24:
  20
  21         isl1219: rtc@68 {
  22                 compatible = "isil,isl1219";
  23                 reg = <0x68>;
  24                 interrupt-names = "irq", "evdet";
  25                 interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
  26                         <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
  27                 isil,ev-evienb = <1>;
  28         };
  29