Documentation/devicetree/bindings/mfd/rn5t618.txt

   1 * Ricoh RN5T567/RN5T618 PMIC
   2
   3 Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
   4 integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
   5 GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
   6 The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
   7 fuel gauge, and an ADC.
   8 The RC5T619 additionnally includes USB charger detection and an RTC.
   9
  10 Required properties:
  11  - compatible: must be one of
  12                 "ricoh,rn5t567"
  13                 "ricoh,rn5t618"
  14                 "ricoh,rc5t619"
  15  - reg: the I2C slave address of the device
  16
  17 Optional properties:
  18  - system-power-controller:
  19    See Documentation/devicetree/bindings/power/power-controller.txt
  20
  21 Sub-nodes:
  22  - regulators: the node is required if the regulator functionality is
  23    needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
  24    (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
  25    LDO9, LDO10, LDORTC1 and LDORTC2.
  26    LDO7-10 are specific to RC5T619.
  27    The common bindings for each individual regulator can be found in:
  28    Documentation/devicetree/bindings/regulator/regulator.txt
  29
  30 Example:
  31
  32         pmic@32 {
  33                 compatible = "ricoh,rn5t618";
  34                 reg = <0x32>;
  35                 system-power-controller;
  36
  37                 regulators {
  38                         DCDC1 {
  39                                 regulator-min-microvolt = <1050000>;
  40                                 regulator-max-microvolt = <1050000>;
  41                         };
  42
  43                         DCDC2 {
  44                                 regulator-min-microvolt = <1175000>;
  45                                 regulator-max-microvolt = <1175000>;
  46                         };
  47                 };
  48         };