1 Rockchip specific extensions to the Synopsys Designware MIPI DSI
2 ================================
5 - #address-cells: Should be <1>.
6 - #size-cells: Should be <0>.
7 - compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
8 "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
9 - reg: Represent the physical address range of the controller.
10 - interrupts: Represent the controller's interrupt to the CPU(s).
11 - clocks, clock-names: Phandles to the controller's pll reference
12 clock(ref) and APB clock(pclk). For RK3399, a phy config clock
13 (phy_cfg) and a grf clock(grf) are required. As described in [1].
14 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
15 - ports: contain a port node with endpoint definitions as defined in [2].
16 For vopb,set the reg = <0> and set the reg = <1> for vopl.
17 - video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
18 - video port 1 for either a panel or subsequent encoder
21 - power-domains: a phandle to mipi dsi power domain node.
22 - resets: list of phandle + reset specifier pairs, as described in [3].
23 - reset-names: string reset name, must be "apb".
25 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
26 [2] Documentation/devicetree/bindings/media/video-interfaces.txt
27 [3] Documentation/devicetree/bindings/reset/reset.txt
30 mipi_dsi: mipi@ff960000 {
33 compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
34 reg = <0xff960000 0x4000>;
35 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
36 clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
37 clock-names = "ref", "pclk";
38 resets = <&cru SRST_MIPIDSI0>;
40 rockchip,grf = <&grf>;
51 mipi_in_vopb: endpoint@0 {
53 remote-endpoint = <&vopb_out_mipi>;
55 mipi_in_vopl: endpoint@1 {
57 remote-endpoint = <&vopl_out_mipi>;
66 mipi_out_panel: endpoint {
67 remote-endpoint = <&panel_in_mipi>;
73 compatible ="boe,tv080wum-nl0";
76 enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
77 pinctrl-names = "default";
78 pinctrl-0 = <&lcd_en>;
79 backlight = <&backlight>;
82 panel_in_mipi: endpoint {
83 remote-endpoint = <&mipi_out_panel>;