)
set(DISSECTOR_SUPPORT_SRC
+ errno.c
packet-dcerpc-nt.c
usb.c
snort-config.c
# directory, but they're not dissectors themselves, i.e. they're not
# used to generate "register.c").
DISSECTOR_SUPPORT_SRC = \
+ errno.c \
packet-dcerpc-nt.c \
snort-config.c \
usb.c \
--- /dev/null
+/* errno.c
+ * String descriptions for errno values.
+ *
+ * Wireshark - Network traffic analyzer
+ * By Gerald Combs <gerald@wireshark.org>
+ * Copyright 1998 Gerald Combs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "config.h"
+
+#include <epan/value_string.h>
+
+/* Note: sorted in (unsigned) ascending order with no gaps to enable direct,
+ * array-indexed access. */
+static const value_string linux_negative_errno_vals[] = {
+ /* from include/uapi/asm-generic/errno.h */
+ { -133, "Memory page has hardware error (-EHWPOISON)" },
+ { -132, "Operation not possible due to RF-kill (-ERFKILL)" },
+ { -131, "State not recoverable (-ENOTRECOVERABLE)" },
+ { -130, "Owner died (-EOWNERDEAD)" },
+ { -129, "Key was rejected by service (-EKEYREJECTED)" },
+ { -128, "Key has been revoked (-EKEYREVOKED)" },
+ { -127, "Key has expired (-EKEYEXPIRED)" },
+ { -126, "Required key not available (-ENOKEY)" },
+ { -125, "Operation Canceled (-ECANCELED)" },
+ { -124, "Wrong medium type (-EMEDIUMTYPE)" },
+ { -123, "No medium found (-ENOMEDIUM)" },
+ { -122, "Quota exceeded (-EDQUOT)" },
+ { -121, "Remote I/O error (-EREMOTEIO)" },
+ { -120, "Is a named type file (-EISNAM)" },
+ { -119, "No XENIX semaphores available (-ENAVAIL)" },
+ { -118, "Not a XENIX named type file (-ENOTNAM)" },
+ { -117, "Structure needs cleaning (-EUCLEAN)" },
+ { -116, "Stale file handle (-ESTALE)" },
+ { -115, "Operation now in progress (-EINPROGRESS)" },
+ { -114, "Operation already in progress (-EALREADY)" },
+ { -113, "No route to host (-EHOSTUNREACH)" },
+ { -112, "Host is down (-EHOSTDOWN)" },
+ { -111, "Connection refused (-ECONNREFUSED)" },
+ { -110, "Connection timed out (-ETIMEDOUT)" },
+ { -109, "Too many references: cannot splice (-ETOOMANYREFS)" },
+ { -108, "Cannot send after transport endpoint shutdown (-ESHUTDOWN)" },
+ { -107, "Transport endpoint is not connected (-ENOTCONN)" },
+ { -106, "Transport endpoint is already connected (-EISCONN)" },
+ { -105, "No buffer space available (-ENOBUFS)" },
+ { -104, "Connection reset by peer (-ECONNRESET)" },
+ { -103, "Software caused connection abort (-ECONNABORTED)" },
+ { -102, "Network dropped connection because of reset (-ENETRESET)" },
+ { -101, "Network is unreachable (-ENETUNREACH)" },
+ { -100, "Network is down (-ENETDOWN)" },
+ { -99, "Cannot assign requested address (-EADDRNOTAVAIL)" },
+ { -98, "Address already in use (-EADDRINUSE)" },
+ { -97, "Address family not supported by protocol (-EAFNOSUPPORT)" },
+ { -96, "Protocol family not supported (-EPFNOSUPPORT)" },
+ { -95, "Operation not supported on transport endpoint (-EOPNOTSUPP)" },
+ { -94, "Socket type not supported (-ESOCKTNOSUPPORT)" },
+ { -93, "Protocol not supported (-EPROTONOSUPPORT)" },
+ { -92, "Protocol not available (-ENOPROTOOPT)" },
+ { -91, "Protocol wrong type for socket (-EPROTOTYPE)" },
+ { -90, "Message too long (-EMSGSIZE)" },
+ { -89, "Destination address required (-EDESTADDRREQ)" },
+ { -88, "Socket operation on non-socket (-ENOTSOCK)" },
+ { -87, "Too many users (-EUSERS)" },
+ { -86, "Streams pipe error (-ESTRPIPE)" },
+ { -85, "Interrupted system call should be restarted (-ERESTART)" },
+ { -84, "Illegal byte sequence (-EILSEQ)" },
+ { -83, "Cannot exec a shared library directly (-ELIBEXEC)" },
+ { -82, "Attempting to link in too many shared libraries (-ELIBMAX)" },
+ { -81, ".lib section in a.out corrupted (-ELIBSCN)" },
+ { -80, "Accessing a corrupted shared library (-ELIBBAD)" },
+ { -79, "Can not access a needed shared library (-ELIBACC)" },
+ { -78, "Remote address changed (-EREMCHG)" },
+ { -77, "File descriptor in bad state (-EBADFD)" },
+ { -76, "Name not unique on network (-ENOTUNIQ)" },
+ { -75, "Value too large for defined data type (-EOVERFLOW)" },
+ { -74, "Not a data message (-EBADMSG)" },
+ { -73, "RFS specific error (-EDOTDOT)" },
+ { -72, "Multihop attempted (-EMULTIHOP)" },
+ { -71, "Protocol error (-EPROTO)" },
+ { -70, "Communication error on send (-ECOMM)" },
+ { -69, "Srmount error (-ESRMNT)" },
+ { -68, "Advertise error (-EADV)" },
+ { -67, "Link has been severed (-ENOLINK)" },
+ { -66, "Object is remote (-EREMOTE)" },
+ { -65, "Package not installed (-ENOPKG)" },
+ { -64, "Machine is not on the network (-ENONET)" },
+ { -63, "Out of streams resources (-ENOSR)" },
+ { -62, "Timer expired (-ETIME)" },
+ { -61, "No data available (-ENODATA)" },
+ { -60, "Device not a stream (-ENOSTR)" },
+ { -59, "Bad font file format (-EBFONT)" },
+ { -58, "(-58 \?\?\?)" }, /* dummy so that there are no "gaps" */
+ { -57, "Invalid slot (-EBADSLT)" },
+ { -56, "Invalid request code (-EBADRQC)" },
+ { -55, "No anode (-ENOANO)" },
+ { -54, "Exchange full (-EXFULL)" },
+ { -53, "Invalid request descriptor (-EBADR)" },
+ { -52, "Invalid exchange (-EBADE)" },
+ { -51, "Level 2 halted (-EL2HLT)" },
+ { -50, "No CSI structure available (-ENOCSI)" },
+ { -49, "Protocol driver not attached (-EUNATCH)" },
+ { -48, "Link number out of range (-ELNRNG)" },
+ { -47, "Level 3 reset (-EL3RST)" },
+ { -46, "Level 3 halted (-EL3HLT)" },
+ { -45, "Level 2 not synchronized (-EL2NSYNC)" },
+ { -44, "Channel number out of range (-ECHRNG)" },
+ { -43, "Identifier removed (-EIDRM)" },
+ { -42, "No message of desired type (-ENOMSG)" },
+ { -41, "(-41 \?\?\?)" }, /* dummy so that there are no "gaps" */
+ { -40, "Too many symbolic links encountered (-ELOOP)" },
+ { -39, "Directory not empty (-ENOTEMPTY)" },
+ { -38, "Invalid system call number (-ENOSYS)" },
+ { -37, "No record locks available (-ENOLCK)" },
+ { -36, "File name too long (-ENAMETOOLONG)" },
+ { -35, "Resource deadlock would occur (-EDEADLK)" },
+ /* from include/uapi/asm-generic/errno-base.h */
+ { -34, "Math result not representable (-ERANGE)" },
+ { -33, "Math argument out of domain of func (-EDOM)" },
+ { -32, "Broken pipe (-EPIPE)" },
+ { -31, "Too many links (-EMLINK)" },
+ { -30, "Read-only file system (-EROFS)" },
+ { -29, "Illegal seek (-ESPIPE)" },
+ { -28, "No space left on device (-ENOSPC)" },
+ { -27, "File too large (-EFBIG)" },
+ { -26, "Text file busy (-ETXTBSY)" },
+ { -25, "Not a typewriter (-ENOTTY)" },
+ { -24, "Too many open files (-EMFILE)" },
+ { -23, "File table overflow (-ENFILE)" },
+ { -22, "Invalid argument (-EINVAL)" },
+ { -21, "Is a directory (-EISDIR)" },
+ { -20, "Not a directory (-ENOTDIR)" },
+ { -19, "No such device (-ENODEV)" },
+ { -18, "Cross-device link (-EXDEV)" },
+ { -17, "File exists (-EEXIST)" },
+ { -16, "Device or resource busy (-EBUSY)" },
+ { -15, "Block device required (-ENOTBLK)" },
+ { -14, "Bad address (-EFAULT)" },
+ { -13, "Permission denied (-EACCES)" },
+ { -12, "Out of memory (-ENOMEM)" },
+ { -11, "Try again (-EAGAIN)" },
+ { -10, "No child processes (-ECHILD)" },
+ { -9, "Bad file number (-EBADF)" },
+ { -8, "Exec format error (-ENOEXEC)" },
+ { -7, "Argument list too long (-E2BIG)" },
+ { -6, "No such device or address (-ENXIO)" },
+ { -5, "I/O error (-EIO)" },
+ { -4, "Interrupted system call (-EINTR)" },
+ { -3, "No such process (-ESRCH)" },
+ { -2, "No such file or directory (-ENOENT)" },
+ { -1, "Operation not permitted (-EPERM)" },
+ { 0, "Success" },
+ { 0, NULL }
+};
+
+value_string_ext linux_negative_errno_vals_ext = VALUE_STRING_EXT_INIT(linux_negative_errno_vals);
+
+/*
+ * Editor modelines - http://www.wireshark.org/tools/modelines.html
+ *
+ * Local variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * vi: set shiftwidth=4 tabstop=8 expandtab:
+ * :indentSize=4:tabSize=8:noTabs=true:
+ */
{ 0, NULL }
};
+extern value_string_ext linux_negative_errno_vals_ext;
+
static dissector_handle_t netlink_handle;
static header_field_info *hfi_netlink = NULL;
/* TODO add a value_string for errno. */
static header_field_info hfi_netlink_error NETLINK_HFI_INIT =
- { "Error code", "netlink.error", FT_INT32, BASE_DEC,
- NULL, 0x00, "Negative errno or 0 for acknowledgements", HFILL };
+ { "Error code", "netlink.error", FT_INT32, BASE_DEC | BASE_EXT_STRING,
+ &linux_negative_errno_vals_ext, 0x00, "Negative errno or 0 for acknowledgements", HFILL };
static gint ett_netlink_cooked = -1;
static gint ett_netlink_msghdr = -1;
extern value_string_ext ext_usb_vendors_vals;
extern value_string_ext ext_usb_products_vals;
extern value_string_ext ext_usb_com_subclass_vals;
+extern value_string_ext linux_negative_errno_vals_ext;
/*
* Standard descriptor types.
{0, NULL}
};
-/* Note: sorted in (unsigned) ascending order */
-static const value_string usb_urb_status_vals[] = {
- /* from linux/include/asm-generic/errno.h*/
- { -131, "State not recoverable (-ENOTRECOVERABLE)" },
- { -130, "Owner died (-EOWNERDEAD)" },
- { -129, "Key was rejected by service (-EKEYREJECTED)" },
- { -128, "Key has been revoked (-EKEYREVOKED)" },
- { -127, "Key has expired (-EKEYEXPIRED)" },
- { -126, "Required key not available (-ENOKEY)" },
- { -125, "Operation Canceled (-ECANCELED)" },
- { -124, "Wrong medium type (-EMEDIUMTYPE)" },
- { -123, "No medium found (-ENOMEDIUM)" },
- { -122, "Quota exceeded (-EDQUOT)" },
- { -121, "Remote I/O error (-EREMOTEIO)" },
- { -120, "Is a named type file (-EISNAM)" },
- { -119, "No XENIX semaphores available (-ENAVAIL)" },
- { -118, "Not a XENIX named type file (-ENOTNAM)" },
- { -117, "Structure needs cleaning (-EUCLEAN)" },
- { -116, "Stale NFS file handle (-ESTALE)" },
- { -115, "Operation now in progress (-EINPROGRESS)" },
- { -114, "Operation already in progress (-EALREADY)" },
- { -113, "No route to host (-EHOSTUNREACH)" },
- { -112, "Host is down (-EHOSTDOWN)" },
- { -111, "Connection refused (-ECONNREFUSED)" },
- { -110, "Connection timed out (-ETIMEDOUT)" },
- { -109, "Too many references: cannot splice (-ETOOMANYREFS)" },
- { -108, "Cannot send after transport endpoint shutdown (-ESHUTDOWN)" },
- { -107, "Transport endpoint is not connected (-ENOTCONN)" },
- { -106, "Transport endpoint is already connected (-EISCONN)" },
- { -105, "No buffer space available (-ENOBUFS)" },
- { -104, "Connection reset by peer (-ECONNRESET)" },
- { -103, "Software caused connection abort (-ECONNABORTED)" },
- { -102, "Network dropped connection because of reset (-ENETRESET)" },
- { -101, "Network is unreachable (-ENETUNREACH)" },
- { -100, "Network is down (-ENETDOWN)" },
- { -99, "Cannot assign requested address (-EADDRNOTAVAIL)" },
- { -98, "Address already in use (-EADDRINUSE)" },
- { -97, "Address family not supported by protocol (-EAFNOSUPPORT)" },
- { -96, "Protocol family not supported (-EPFNOSUPPORT)" },
- { -95, "Operation not supported on transport endpoint (-EOPNOTSUPP)" },
- { -94, "Socket type not supported (-ESOCKTNOSUPPORT)" },
- { -93, "Protocol not supported (-EPROTONOSUPPORT)" },
- { -92, "Protocol not available (-ENOPROTOOPT)" },
- { -91, "Protocol wrong type for socket (-EPROTOTYPE)" },
- { -90, "Message too long (-EMSGSIZE)" },
- { -89, "Destination address required (-EDESTADDRREQ)" },
- { -88, "Socket operation on non-socket (-ENOTSOCK)" },
- { -87, "Too many users (-EUSERS)" },
- { -86, "Streams pipe error (-ESTRPIPE)" },
- { -85, "Interrupted system call should be restarted (-ERESTART)" },
- { -84, "Illegal byte sequence (-EILSEQ)" },
- { -83, "Cannot exec a shared library directly (-ELIBEXEC)" },
- { -82, "Attempting to link in too many shared libraries (-ELIBMAX)" },
- { -81, ".lib section in a.out corrupted (-ELIBSCN)" },
- { -80, "Accessing a corrupted shared library (-ELIBBAD)" },
- { -79, "Can not access a needed shared library (-ELIBACC)" },
- { -78, "Remote address changed (-EREMCHG)" },
- { -77, "File descriptor in bad state (-EBADFD)" },
- { -76, "Name not unique on network (-ENOTUNIQ)" },
- { -75, "Value too large for defined data type (-EOVERFLOW)" },
- { -74, "Not a data message (-EBADMSG)" },
- { -73, "RFS specific error (-EDOTDOT)" },
- { -72, "Multihop attempted (-EMULTIHOP)" },
- { -71, "Protocol error (-EPROTO)" },
- { -70, "Communication error on send (-ECOMM)" },
- { -69, "Srmount error (-ESRMNT)" },
- { -68, "Advertise error (-EADV)" },
- { -67, "Link has been severed (-ENOLINK)" },
- { -66, "Object is remote (-EREMOTE)" },
- { -65, "Package not installed (-ENOPKG)" },
- { -64, "Machine is not on the network (-ENONET)" },
- { -63, "Out of streams resources (-ENOSR)" },
- { -62, "Timer expired (-ETIME)" },
- { -61, "No data available (-ENODATA)" },
- { -60, "Device not a stream (-ENOSTR)" },
- { -59, "Bad font file format (-EBFONT)" },
- { -58, "(-58 \?\?\?)" }, /* dummy so that there are no "gaps" */
- { -57, "Invalid slot (-EBADSLT)" },
- { -56, "Invalid request code (-EBADRQC)" },
- { -55, "No anode (-ENOANO)" },
- { -54, "Exchange full (-EXFULL)" },
- { -53, "Invalid request descriptor (-EBADR)" },
- { -52, "Invalid exchange (-EBADE)" },
- { -51, "Level 2 halted (-EL2HLT)" },
- { -50, "No CSI structure available (-ENOCSI)" },
- { -49, "Protocol driver not attached (-EUNATCH)" },
- { -48, "Link number out of range (-ELNRNG)" },
- { -47, "Level 3 reset (-EL3RST)" },
- { -46, "Level 3 halted (-EL3HLT)" },
- { -45, "Level 2 not synchronized (-EL2NSYNC)" },
- { -44, "Channel number out of range (-ECHRNG)" },
- { -43, "Identifier removed (-EIDRM)" },
- { -42, "No message of desired type (-ENOMSG)" },
- { -41, "(-41 \?\?\?)" }, /* dummy so that there are no "gaps" */
- { -40, "Too many symbolic links encountered (-ELOOP)" },
- { -39, "Directory not empty (-ENOTEMPTY)" },
- { -38, "Function not implemented (-ENOSYS)" },
- { -37, "No record locks available (-ENOLCK)" },
- { -36, "File name too long (-ENAMETOOLONG)" },
- { -35, "Resource deadlock would occur (-EDEADLK)" },
- /* from linux/include/asm-generic/errno.h */
- { -34, "Math result not representable (-ERANGE)" },
- { -33, "Math argument out of domain of func (-EDOM)" },
- { -32, "Broken pipe (-EPIPE)" },
- { -31, "Too many links (-EMLINK)" },
- { -30, "Read-only file system (-EROFS)" },
- { -29, "Illegal seek (-ESPIPE)" },
- { -28, "No space left on device (-ENOSPC)" },
- { -27, "File too large (-EFBIG)" },
- { -26, "Text file busy (-ETXTBSY)" },
- { -25, "Not a typewriter (-ENOTTY)" },
- { -24, "Too many open files (-EMFILE)" },
- { -23, "File table overflow (-ENFILE)" },
- { -22, "Invalid argument (-EINVAL)" },
- { -21, "Is a directory (-EISDIR)" },
- { -20, "Not a directory (-ENOTDIR)" },
- { -19, "No such device (-ENODEV)" },
- { -18, "Cross-device link (-EXDEV)" },
- { -17, "File exists (-EEXIST)" },
- { -16, "Device or resource busy (-EBUSY)" },
- { -15, "Block device required (-ENOTBLK)" },
- { -14, "Bad address (-EFAULT)" },
- { -13, "Permission denied (-EACCES)" },
- { -12, "Out of memory (-ENOMEM)" },
- { -11, "Try again (-EAGAIN)" },
- { -10, "No child processes (-ECHILD)" },
- { -9, "Bad file number (-EBADF)" },
- { -8, "Exec format error (-ENOEXEC)" },
- { -7, "Argument list too long (-E2BIG)" },
- { -6, "No such device or address (-ENXIO)" },
- { -5, "I/O error (-EIO)" },
- { -4, "Interrupted system call (-EINTR)" },
- { -3, "No such process (-ESRCH)" },
- { -2, "No such file or directory (-ENOENT)" },
- { -1, "Operation not permitted (-EPERM)" },
- { 0, "Success"},
- { 0, NULL }
-};
-value_string_ext usb_urb_status_vals_ext = VALUE_STRING_EXT_INIT(usb_urb_status_vals);
-
#define USB_CONTROL_STAGE_SETUP 0x00
#define USB_CONTROL_STAGE_DATA 0x01
#define USB_CONTROL_STAGE_STATUS 0x02
tvb_memcpy(tvb, (guint8 *)&iso_len, offset+8, 4);
iso_desc_ti = proto_tree_add_protocol_format(urb_tree, proto_usb, tvb, offset,
- 16, "USB isodesc %u [%s]", i, val_to_str_ext(iso_status, &usb_urb_status_vals_ext, "Error %d"));
+ 16, "USB isodesc %u [%s]", i, val_to_str_ext(iso_status, &linux_negative_errno_vals_ext, "Error %d"));
if (iso_len > 0)
proto_item_append_text(iso_desc_ti, " (%u bytes)", iso_len);
iso_desc_tree = proto_item_add_subtree(iso_desc_ti, ett_usb_isodesc);
iso_status = tvb_get_ntohl(tvb, desc_offset + 12);
iso_desc_ti = proto_tree_add_protocol_format(urb_tree, proto_usb, tvb, desc_offset,
- 16, "USB isodesc %u [%s]", i, val_to_str_ext(iso_status, &usb_urb_status_vals_ext, "Error %d"));
+ 16, "USB isodesc %u [%s]", i, val_to_str_ext(iso_status, &linux_negative_errno_vals_ext, "Error %d"));
iso_desc_tree = proto_item_add_subtree(iso_desc_ti, ett_usb_isodesc);
proto_tree_add_item_ret_uint(iso_desc_tree, hf_usb_iso_off, tvb, desc_offset, 4, ENC_BIG_ENDIAN, &iso_off);
{ &hf_usb_urb_status,
{ "URB status", "usb.urb_status",
- FT_INT32, BASE_DEC|BASE_EXT_STRING, &usb_urb_status_vals_ext, 0x0,
+ FT_INT32, BASE_DEC|BASE_EXT_STRING, &linux_negative_errno_vals_ext, 0x0,
NULL, HFILL }},
{ &hf_usb_urb_len,
/* fields of struct mon_bin_isodesc from linux/drivers/usb/mon/mon_bin.c */
{ &hf_usb_iso_status, /* host endian byte order */
{ "Status", "usb.iso.iso_status",
- FT_INT32, BASE_DEC|BASE_EXT_STRING, &usb_urb_status_vals_ext, 0x0,
+ FT_INT32, BASE_DEC|BASE_EXT_STRING, &linux_negative_errno_vals_ext, 0x0,
"ISO descriptor status", HFILL }},
{ &hf_usb_iso_off, /* host endian byte order */
extern value_string_ext usb_class_vals_ext;
-extern value_string_ext usb_urb_status_vals_ext;
-
usb_conv_info_t *get_usb_iface_conv_info(packet_info *pinfo, guint8 interface_num);
proto_item * dissect_usb_descriptor_header(proto_tree *tree,
extern value_string_ext ext_usb_vendors_vals;
extern value_string_ext ext_usb_products_vals;
+extern value_string_ext linux_negative_errno_vals_ext;
static const value_string usb_endpoint_direction_vals[] = {
{USBIP_DIR_OUT, "OUT" },
{&hf_usbip_status,
{"Status", "usbip.status",
- FT_INT32, BASE_DEC | BASE_EXT_STRING, &usb_urb_status_vals_ext, 0,
+ FT_INT32, BASE_DEC | BASE_EXT_STRING, &linux_negative_errno_vals_ext, 0,
"USBIP Status", HFILL}},
{&hf_usbip_number_devices,
git.samba.org / metze / wireshark / wip.git / commitdiff