extern size_t bwlimit_writemax;
extern int io_timeout;
extern int am_server;
-extern int am_daemon;
extern int am_sender;
+extern int am_receiver;
extern int am_generator;
+extern int msgs2stderr;
extern int inc_recurse;
extern int io_error;
extern int eol_nulls;
extern int file_old_total;
extern int list_only;
extern int read_batch;
+extern int compat_flags;
extern int protect_args;
extern int checksum_seed;
extern int protocol_version;
int csum_length = SHORT_SUM_LENGTH; /* initial value */
int allowed_lull = 0;
-int ignore_timeout = 0;
int batch_fd = -1;
int msgdone_cnt = 0;
+int forward_flist_data = 0;
+BOOL flist_receiving_enabled = False;
/* Ignore an EOF error if non-zero. See whine_about_eof(). */
int kluge_around_eof = 0;
-int msg_fd_in = -1;
-int msg_fd_out = -1;
int sock_f_in = -1;
int sock_f_out = -1;
-static int iobuf_f_in = -1;
-static char *iobuf_in;
-static size_t iobuf_in_siz;
-static size_t iobuf_in_ndx;
-static size_t iobuf_in_remaining;
+int64 total_data_read = 0;
+int64 total_data_written = 0;
-static int iobuf_f_out = -1;
-static char *iobuf_out;
-static int iobuf_out_cnt;
+static struct {
+ xbuf in, out, msg;
+ int in_fd;
+ int out_fd; /* Both "out" and "msg" go to this fd. */
+ int in_multiplexed;
+ unsigned out_empty_len;
+ size_t raw_data_header_pos; /* in the out xbuf */
+ size_t raw_flushing_ends_before; /* in the out xbuf */
+ size_t raw_input_ends_before; /* in the in xbuf */
+} iobuf = { .in_fd = -1, .out_fd = -1 };
-int flist_forward_from = -1;
-
-static int io_multiplexing_out;
-static int io_multiplexing_in;
static time_t last_io_in;
static time_t last_io_out;
-static int no_flush;
static int write_batch_monitor_in = -1;
static int write_batch_monitor_out = -1;
-static int io_filesfrom_f_in = -1;
-static int io_filesfrom_f_out = -1;
-static xbuf ff_buf = EMPTY_XBUF;
-static char ff_lastchar;
+static int ff_forward_fd = -1;
+static int ff_reenable_multiplex = -1;
+static char ff_lastchar = '\0';
+static xbuf ff_xb = EMPTY_XBUF;
#ifdef ICONV_OPTION
static xbuf iconv_buf = EMPTY_XBUF;
#endif
-static int defer_forwarding_messages = 0, keep_defer_forwarding = 0;
static int select_timeout = SELECT_TIMEOUT;
static int active_filecnt = 0;
static OFF_T active_bytecnt = 0;
2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
};
-#define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
-#define REMOTE_OPTION_ERROR2 ": unknown option"
-
-enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
-
-static void readfd(int fd, char *buffer, size_t N);
-static void writefd(int fd, const char *buf, size_t len);
-static void writefd_unbuffered(int fd, const char *buf, size_t len);
-static void mplex_write(int fd, enum msgcode code, const char *buf, size_t len, int convert);
-static void read_a_msg(int fd);
+/* Our I/O buffers are sized with no bits on in the lowest byte of the "size"
+ * (indeed, our rounding of sizes in 1024-byte units assures more than this).
+ * This allows the code that is storing bytes near the physical end of a
+ * circular buffer to temporarily reduce the buffer's size (in order to make
+ * some storing idioms easier), while also making it simple to restore the
+ * buffer's actual size when the buffer's "pos" wraps around to the start (we
+ * just round the buffer's size up again). */
-static flist_ndx_list redo_list, hlink_list;
+#define IOBUF_WAS_REDUCED(siz) ((siz) & 0xFF)
+#define IOBUF_RESTORE_SIZE(siz) (((siz) | 0xFF) + 1)
-struct msg_list_item {
- struct msg_list_item *next;
- char convert;
- char buf[1];
-};
+#define IN_MULTIPLEXED (iobuf.in_multiplexed != 0)
+#define IN_MULTIPLEXED_AND_READY (iobuf.in_multiplexed > 0)
+#define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
-struct msg_list {
- struct msg_list_item *head, *tail;
-};
+#define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
+#define PIO_NEED_OUTROOM (1<<1)
+#define PIO_NEED_MSGROOM (1<<2)
-static struct msg_list msg_queue;
+#define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
-static void got_flist_entry_status(enum festatus status, const char *buf)
-{
- int ndx = IVAL(buf, 0);
- struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
+#define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
+#define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
- if (remove_source_files) {
- active_filecnt--;
- active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
- }
+#define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
+#define REMOTE_OPTION_ERROR2 ": unknown option"
- if (inc_recurse)
- flist->in_progress--;
+#define FILESFROM_BUFLEN 2048
- switch (status) {
- case FES_SUCCESS:
- if (remove_source_files)
- send_msg(MSG_SUCCESS, buf, 4, 0);
- if (preserve_hard_links) {
- struct file_struct *file = flist->files[ndx - flist->ndx_start];
- if (F_IS_HLINKED(file)) {
- flist_ndx_push(&hlink_list, ndx);
- flist->in_progress++;
- }
- }
- break;
- case FES_REDO:
- if (read_batch) {
- if (inc_recurse)
- flist->in_progress++;
- break;
- }
- if (inc_recurse)
- flist->to_redo++;
- flist_ndx_push(&redo_list, ndx);
- break;
- case FES_NO_SEND:
- break;
- }
-}
+enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
-static void check_timeout(void)
-{
- time_t t;
+static flist_ndx_list redo_list, hlink_list;
- if (!io_timeout || ignore_timeout)
+static void read_a_msg(void);
+static void drain_multiplex_messages(void);
+static void sleep_for_bwlimit(int bytes_written);
+
+static void check_timeout(BOOL allow_keepalive)
+{
+ time_t t, chk;
+
+ /* On the receiving side, the generator is now the one that decides
+ * when a timeout has occurred. When it is sifting through a lot of
+ * files looking for work, it will be sending keep-alive messages to
+ * the sender, and even though the receiver won't be sending/receiving
+ * anything (not even keep-alive messages), the successful writes to
+ * the sender will keep things going. If the receiver is actively
+ * receiving data, it will ensure that the generator knows that it is
+ * not idle by sending the generator keep-alive messages (since the
+ * generator might be blocked trying to send checksums, it needs to
+ * know that the receiver is active). Thus, as long as one or the
+ * other is successfully doing work, the generator will not timeout. */
+ if (!io_timeout)
return;
- if (!last_io_in) {
- last_io_in = time(NULL);
- return;
+ t = time(NULL);
+
+ if (allow_keepalive) {
+ /* This may put data into iobuf.msg w/o flushing. */
+ maybe_send_keepalive(t, 0);
}
- t = time(NULL);
+ if (!last_io_in)
+ last_io_in = t;
- if (t - last_io_in >= io_timeout) {
- if (!am_server && !am_daemon) {
- rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
- (int)(t-last_io_in));
- }
+ if (am_receiver)
+ return;
+
+ chk = MAX(last_io_out, last_io_in);
+ if (t - chk >= io_timeout) {
+ if (am_server)
+ msgs2stderr = 1;
+ rprintf(FERROR, "[%s] io timeout after %d seconds -- exiting\n",
+ who_am_i(), (int)(t-chk));
exit_cleanup(RERR_TIMEOUT);
}
}
-/* Note the fds used for the main socket (which might really be a pipe
- * for a local transfer, but we can ignore that). */
-void io_set_sock_fds(int f_in, int f_out)
-{
- sock_f_in = f_in;
- sock_f_out = f_out;
-}
-
-void set_io_timeout(int secs)
+/* It's almost always an error to get an EOF when we're trying to read from the
+ * network, because the protocol is (for the most part) self-terminating.
+ *
+ * There is one case for the receiver when it is at the end of the transfer
+ * (hanging around reading any keep-alive packets that might come its way): if
+ * the sender dies before the generator's kill-signal comes through, we can end
+ * up here needing to loop until the kill-signal arrives. In this situation,
+ * kluge_around_eof will be < 0.
+ *
+ * There is another case for older protocol versions (< 24) where the module
+ * listing was not terminated, so we must ignore an EOF error in that case and
+ * exit. In this situation, kluge_around_eof will be > 0. */
+static NORETURN void whine_about_eof(BOOL allow_kluge)
{
- io_timeout = secs;
+ if (kluge_around_eof && allow_kluge) {
+ int i;
+ if (kluge_around_eof > 0)
+ exit_cleanup(0);
+ /* If we're still here after 10 seconds, exit with an error. */
+ for (i = 10*1000/20; i--; )
+ msleep(20);
+ }
- if (!io_timeout || io_timeout > SELECT_TIMEOUT)
- select_timeout = SELECT_TIMEOUT;
- else
- select_timeout = io_timeout;
+ rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
+ "(%s bytes received so far) [%s]\n",
+ big_num(stats.total_read), who_am_i());
- allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
+ exit_cleanup(RERR_STREAMIO);
}
-/* Setup the fd used to receive MSG_* messages. Only needed during the
- * early stages of being a local sender (up through the sending of the
- * file list) or when we're the generator (to fetch the messages from
- * the receiver). */
-void set_msg_fd_in(int fd)
+/* Do a safe read, handling any needed looping and error handling.
+ * Returns the count of the bytes read, which will only be different
+ * from "len" if we encountered an EOF. This routine is not used on
+ * the socket except very early in the transfer. */
+static size_t safe_read(int fd, char *buf, size_t len)
{
- msg_fd_in = fd;
-}
+ size_t got;
+ int n;
-/* Setup the fd used to send our MSG_* messages. Only needed when
- * we're the receiver (to send our messages to the generator). */
-void set_msg_fd_out(int fd)
-{
- msg_fd_out = fd;
- set_nonblocking(msg_fd_out);
-}
+ assert(fd != iobuf.in_fd);
-/* Add a message to the pending MSG_* list. */
-static void msg_list_add(struct msg_list *lst, int code, const char *buf, int len, int convert)
-{
- struct msg_list_item *m;
- int sz = len + 4 + sizeof m[0] - 1;
+ n = read(fd, buf, len);
+ if ((size_t)n == len || n == 0) {
+ if (DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
+ return n;
+ }
+ if (n < 0) {
+ if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
+ read_failed:
+ rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
+ (long)len, who_am_i());
+ exit_cleanup(RERR_STREAMIO);
+ }
+ got = 0;
+ } else
+ got = n;
- if (!(m = (struct msg_list_item *)new_array(char, sz)))
- out_of_memory("msg_list_add");
- m->next = NULL;
- m->convert = convert;
- SIVAL(m->buf, 0, ((code+MPLEX_BASE)<<24) | len);
- memcpy(m->buf + 4, buf, len);
- if (lst->tail)
- lst->tail->next = m;
- else
- lst->head = m;
- lst->tail = m;
-}
+ while (1) {
+ struct timeval tv;
+ fd_set r_fds, e_fds;
+ int cnt;
-static inline int flush_a_msg(int fd)
-{
- struct msg_list_item *m = msg_queue.head;
- int len = IVAL(m->buf, 0) & 0xFFFFFF;
- int tag = *((uchar*)m->buf+3) - MPLEX_BASE;
+ FD_ZERO(&r_fds);
+ FD_SET(fd, &r_fds);
+ FD_ZERO(&e_fds);
+ FD_SET(fd, &e_fds);
+ tv.tv_sec = select_timeout;
+ tv.tv_usec = 0;
- if (!(msg_queue.head = m->next))
- msg_queue.tail = NULL;
+ cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
+ if (cnt <= 0) {
+ if (cnt < 0 && errno == EBADF) {
+ rsyserr(FERROR, errno, "safe_read select failed [%s]",
+ who_am_i());
+ exit_cleanup(RERR_FILEIO);
+ }
+ if (io_timeout)
+ maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
+ continue;
+ }
- defer_forwarding_messages++;
- mplex_write(fd, tag, m->buf + 4, len, m->convert);
- defer_forwarding_messages--;
+ /*if (FD_ISSET(fd, &e_fds))
+ rprintf(FINFO, "select exception on fd %d\n", fd); */
- free(m);
+ if (FD_ISSET(fd, &r_fds)) {
+ n = read(fd, buf + got, len - got);
+ if (DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
+ if (n == 0)
+ break;
+ if (n < 0) {
+ if (errno == EINTR)
+ continue;
+ goto read_failed;
+ }
+ if ((got += (size_t)n) == len)
+ break;
+ }
+ }
- return len;
+ return got;
}
-static void msg_flush(void)
+static const char *what_fd_is(int fd)
{
- if (am_generator) {
- while (msg_queue.head && io_multiplexing_out)
- stats.total_written += flush_a_msg(sock_f_out) + 4;
- } else {
- while (msg_queue.head)
- (void)flush_a_msg(msg_fd_out);
+ static char buf[20];
+
+ if (fd == sock_f_out)
+ return "socket";
+ else if (fd == iobuf.out_fd)
+ return "message fd";
+ else if (fd == batch_fd)
+ return "batch file";
+ else {
+ snprintf(buf, sizeof buf, "fd %d", fd);
+ return buf;
}
}
-static void check_for_d_option_error(const char *msg)
+/* Do a safe write, handling any needed looping and error handling.
+ * Returns only if everything was successfully written. This routine
+ * is not used on the socket except very early in the transfer. */
+static void safe_write(int fd, const char *buf, size_t len)
{
- static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
- char *colon;
- int saw_d = 0;
+ int n;
- if (*msg != 'r'
- || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
- return;
+ assert(fd != iobuf.out_fd);
- msg += sizeof REMOTE_OPTION_ERROR - 1;
- if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
- || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
+ n = write(fd, buf, len);
+ if ((size_t)n == len)
return;
-
- for ( ; *msg != ':'; msg++) {
- if (*msg == 'd')
- saw_d = 1;
- else if (*msg == 'e')
- break;
- else if (strchr(rsync263_opts, *msg) == NULL)
- return;
+ if (n < 0) {
+ if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
+ write_failed:
+ rsyserr(FERROR, errno,
+ "safe_write failed to write %ld bytes to %s [%s]",
+ (long)len, what_fd_is(fd), who_am_i());
+ exit_cleanup(RERR_STREAMIO);
+ }
+ } else {
+ buf += n;
+ len -= n;
}
- if (saw_d) {
- rprintf(FWARNING,
- "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
+ while (len) {
+ struct timeval tv;
+ fd_set w_fds;
+ int cnt;
+
+ FD_ZERO(&w_fds);
+ FD_SET(fd, &w_fds);
+ tv.tv_sec = select_timeout;
+ tv.tv_usec = 0;
+
+ cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
+ if (cnt <= 0) {
+ if (cnt < 0 && errno == EBADF) {
+ rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
+ what_fd_is(fd), who_am_i());
+ exit_cleanup(RERR_FILEIO);
+ }
+ if (io_timeout)
+ maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
+ continue;
+ }
+
+ if (FD_ISSET(fd, &w_fds)) {
+ n = write(fd, buf, len);
+ if (n < 0) {
+ if (errno == EINTR)
+ continue;
+ goto write_failed;
+ }
+ buf += n;
+ len -= n;
+ }
}
}
-/* This is used by the generator to limit how many file transfers can
- * be active at once when --remove-source-files is specified. Without
- * this, sender-side deletions were mostly happening at the end. */
-void increment_active_files(int ndx, int itemizing, enum logcode code)
+/* This is only called when files-from data is known to be available. We read
+ * a chunk of data and put it into the output buffer. */
+static void forward_filesfrom_data(void)
{
- while (1) {
- /* TODO: tune these limits? */
- int limit = active_bytecnt >= 128*1024 ? 10 : 50;
- if (active_filecnt < limit)
- break;
- check_for_finished_files(itemizing, code, 0);
- if (active_filecnt < limit)
- break;
- if (iobuf_out_cnt)
- io_flush(NORMAL_FLUSH);
- else
- read_a_msg(msg_fd_in);
- }
+ int len;
- active_filecnt++;
- active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
-}
+ len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
+ if (len <= 0) {
+ if (len == 0 || errno != EINTR) {
+ /* Send end-of-file marker */
+ ff_forward_fd = -1;
+ write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
+ free_xbuf(&ff_xb);
+ if (ff_reenable_multiplex >= 0)
+ io_start_multiplex_out(ff_reenable_multiplex);
+ }
+ return;
+ }
-/* Write an message to a multiplexed stream. If this fails, rsync exits. */
-static void mplex_write(int fd, enum msgcode code, const char *buf, size_t len, int convert)
-{
- char buffer[BIGPATHBUFLEN]; /* Oversized for use by iconv code. */
- size_t n = len;
+ if (DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
#ifdef ICONV_OPTION
- /* We need to convert buf before doing anything else so that we
- * can include the (converted) byte length in the message header. */
- if (convert && ic_send != (iconv_t)-1) {
- xbuf outbuf, inbuf;
+ len += ff_xb.len;
+#endif
- INIT_XBUF(outbuf, buffer + 4, 0, sizeof buffer - 4);
- INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
+ if (!eol_nulls) {
+ char *s = ff_xb.buf + len;
+ /* Transform CR and/or LF into '\0' */
+ while (s-- > ff_xb.buf) {
+ if (*s == '\n' || *s == '\r')
+ *s = '\0';
+ }
+ }
- iconvbufs(ic_send, &inbuf, &outbuf,
- ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE);
- if (inbuf.len > 0) {
- rprintf(FERROR, "overflowed conversion buffer in mplex_write");
- exit_cleanup(RERR_UNSUPPORTED);
+ if (ff_lastchar)
+ ff_xb.pos = 0;
+ else {
+ char *s = ff_xb.buf;
+ /* Last buf ended with a '\0', so don't let this buf start with one. */
+ while (len && *s == '\0')
+ s++, len--;
+ ff_xb.pos = s - ff_xb.buf;
+ }
+
+#ifdef ICONV_OPTION
+ if (filesfrom_convert && len) {
+ char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
+ char *eob = sob + len;
+ int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
+ if (ff_lastchar == '\0')
+ flags |= ICB_INIT;
+ /* Convert/send each null-terminated string separately, skipping empties. */
+ while (s != eob) {
+ if (*s++ == '\0') {
+ ff_xb.len = s - sob - 1;
+ if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
+ exit_cleanup(RERR_PROTOCOL); /* impossible? */
+ write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
+ while (s != eob && *s == '\0')
+ s++;
+ sob = s;
+ ff_xb.pos = sob - ff_xb.buf;
+ flags |= ICB_INIT;
+ }
}
- n = len = outbuf.len;
+ if ((ff_xb.len = s - sob) == 0)
+ ff_lastchar = '\0';
+ else {
+ /* Handle a partial string specially, saving any incomplete chars. */
+ flags &= ~ICB_INCLUDE_INCOMPLETE;
+ if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
+ if (errno == E2BIG)
+ exit_cleanup(RERR_PROTOCOL); /* impossible? */
+ if (ff_xb.pos)
+ memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
+ }
+ ff_lastchar = 'x'; /* Anything non-zero. */
+ }
} else
#endif
- if (n > 1024 - 4) /* BIGPATHBUFLEN can handle 1024 bytes */
- n = 0; /* We'd rather do 2 writes than too much memcpy(). */
- else
- memcpy(buffer + 4, buf, n);
- SIVAL(buffer, 0, ((MPLEX_BASE + (int)code)<<24) + len);
-
- keep_defer_forwarding++; /* defer_forwarding_messages++ on return */
- writefd_unbuffered(fd, buffer, n+4);
- keep_defer_forwarding--;
-
- if (len > n)
- writefd_unbuffered(fd, buf+n, len-n);
-
- if (!--defer_forwarding_messages && !no_flush)
- msg_flush();
+ if (len) {
+ char *f = ff_xb.buf + ff_xb.pos;
+ char *t = ff_xb.buf;
+ char *eob = f + len;
+ /* Eliminate any multi-'\0' runs. */
+ while (f != eob) {
+ if (!(*t++ = *f++)) {
+ while (f != eob && *f == '\0')
+ f++;
+ }
+ }
+ ff_lastchar = f[-1];
+ if ((len = t - ff_xb.buf) != 0) {
+ /* This will not circle back to perform_io() because we only get
+ * called when there is plenty of room in the output buffer. */
+ write_buf(iobuf.out_fd, ff_xb.buf, len);
+ }
+ }
}
-int send_msg(enum msgcode code, const char *buf, int len, int convert)
+void reduce_iobuf_size(xbuf *out, size_t new_size)
{
- if (msg_fd_out < 0) {
- if (!defer_forwarding_messages)
- return io_multiplex_write(code, buf, len, convert);
- if (!io_multiplexing_out)
- return 0;
- msg_list_add(&msg_queue, code, buf, len, convert);
- return 1;
+ if (new_size < out->size) {
+ if (DEBUG_GTE(IO, 4)) {
+ const char *name = out == &iobuf.out ? "iobuf.out"
+ : out == &iobuf.msg ? "iobuf.msg"
+ : NULL;
+ if (name) {
+ rprintf(FINFO, "[%s] reduced size of %s (-%d)\n",
+ who_am_i(), name, (int)(out->size - new_size));
+ }
+ }
+ out->size = new_size;
}
- if (defer_forwarding_messages)
- msg_list_add(&msg_queue, code, buf, len, convert);
- else
- mplex_write(msg_fd_out, code, buf, len, convert);
- return 1;
}
-void send_msg_int(enum msgcode code, int num)
+void restore_iobuf_size(xbuf *out)
{
- char numbuf[4];
- SIVAL(numbuf, 0, num);
- send_msg(code, numbuf, 4, 0);
+ if (IOBUF_WAS_REDUCED(out->size)) {
+ size_t new_size = IOBUF_RESTORE_SIZE(out->size);
+ if (DEBUG_GTE(IO, 4)) {
+ const char *name = out == &iobuf.out ? "iobuf.out"
+ : out == &iobuf.msg ? "iobuf.msg"
+ : NULL;
+ if (name) {
+ rprintf(FINFO, "[%s] restored size of %s (+%d)\n",
+ who_am_i(), name, (int)(new_size - out->size));
+ }
+ }
+ out->size = new_size;
+ }
}
-void wait_for_receiver(void)
+/* Perform buffered input and/or output until specified conditions are met.
+ * When given a "needed" read or write request, this returns without doing any
+ * I/O if the needed input bytes or write space is already available. Once I/O
+ * is needed, this will try to do whatever reading and/or writing is currently
+ * possible, up to the maximum buffer allowances, no matter if this is a read
+ * or write request. However, the I/O stops as soon as the required input
+ * bytes or output space is available. If this is not a read request, the
+ * routine may also do some advantageous reading of messages from a multiplexed
+ * input source (which ensures that we don't jam up with everyone in their
+ * "need to write" code and nobody reading the accumulated data that would make
+ * writing possible).
+ *
+ * The iobuf.in, .out and .msg buffers are all circular. Callers need to be
+ * aware that some data copies will need to be split when the bytes wrap around
+ * from the end to the start. In order to help make writing into the output
+ * buffers easier for some operations (such as the use of SIVAL() into the
+ * buffer) a buffer may be temporarily shortened by a small amount, but the
+ * original size will be automatically restored when the .pos wraps to the
+ * start. See also the 3 raw_* iobuf vars that are used in the handling of
+ * MSG_DATA bytes as they are read-from/written-into the buffers.
+ *
+ * When writing, we flush data in the following priority order:
+ *
+ * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
+ *
+ * 2. Write out all the messages from the message buf (if iobuf.msg is active).
+ * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
+ * messages before getting to the iobuf.out flushing (except for rule 1).
+ *
+ * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
+ * MSG_DATA header that was pre-allocated (when output is multiplexed).
+ *
+ * TODO: items for possible future work:
+ *
+ * - Make this routine able to read the generator-to-receiver batch flow?
+ *
+ * Unlike the old routines that this replaces, it is OK to read ahead as far as
+ * we can because the read_a_msg() routine now reads its bytes out of the input
+ * buffer. In the old days, only raw data was in the input buffer, and any
+ * unused raw data in the buf would prevent the reading of socket data. */
+static char *perform_io(size_t needed, int flags)
{
- if (io_flush(FULL_FLUSH))
- return;
- read_a_msg(msg_fd_in);
-}
+ fd_set r_fds, e_fds, w_fds;
+ struct timeval tv;
+ int cnt, max_fd;
+ size_t empty_buf_len = 0;
+ xbuf *out;
+ char *data;
+
+ if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
+ if (iobuf.raw_input_ends_before)
+ iobuf.raw_input_ends_before -= iobuf.in.pos;
+ iobuf.in.pos = 0;
+ }
-int get_redo_num(void)
-{
- return flist_ndx_pop(&redo_list);
-}
+ switch (flags & PIO_NEED_FLAGS) {
+ case PIO_NEED_INPUT:
+ /* We never resize the circular input buffer. */
+ if (iobuf.in.size < needed) {
+ rprintf(FERROR, "need to read %ld bytes, iobuf.in.buf is only %ld bytes.\n",
+ (long)needed, (long)iobuf.in.size);
+ exit_cleanup(RERR_PROTOCOL);
+ }
-int get_hlink_num(void)
-{
- return flist_ndx_pop(&hlink_list);
-}
+ if (DEBUG_GTE(IO, 3)) {
+ rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
+ who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
+ }
+ break;
-/**
- * When we're the receiver and we have a local --files-from list of names
- * that needs to be sent over the socket to the sender, we have to do two
- * things at the same time: send the sender a list of what files we're
- * processing and read the incoming file+info list from the sender. We do
- * this by augmenting the read_timeout() function to copy this data. It
- * uses ff_buf to read a block of data from f_in (when it is ready, since
- * it might be a pipe) and then blast it out f_out (when it is ready to
- * receive more data).
- */
-void io_set_filesfrom_fds(int f_in, int f_out)
-{
- io_filesfrom_f_in = f_in;
- io_filesfrom_f_out = f_out;
- alloc_xbuf(&ff_buf, 2048);
-#ifdef ICONV_OPTION
- if (protect_args)
- alloc_xbuf(&iconv_buf, 1024);
-#endif
-}
+ case PIO_NEED_OUTROOM:
+ /* We never resize the circular output buffer. */
+ if (iobuf.out.size - iobuf.out_empty_len < needed) {
+ fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
+ (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
+ exit_cleanup(RERR_PROTOCOL);
+ }
-/* It's almost always an error to get an EOF when we're trying to read from the
- * network, because the protocol is (for the most part) self-terminating.
- *
- * There is one case for the receiver when it is at the end of the transfer
- * (hanging around reading any keep-alive packets that might come its way): if
- * the sender dies before the generator's kill-signal comes through, we can end
- * up here needing to loop until the kill-signal arrives. In this situation,
- * kluge_around_eof will be < 0.
- *
- * There is another case for older protocol versions (< 24) where the module
- * listing was not terminated, so we must ignore an EOF error in that case and
- * exit. In this situation, kluge_around_eof will be > 0. */
-static void whine_about_eof(int fd)
-{
- if (kluge_around_eof && fd == sock_f_in) {
- int i;
- if (kluge_around_eof > 0)
- exit_cleanup(0);
- /* If we're still here after 10 seconds, exit with an error. */
- for (i = 10*1000/20; i--; )
- msleep(20);
- }
+ if (DEBUG_GTE(IO, 3)) {
+ rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
+ who_am_i(), (long)needed,
+ iobuf.out.len + needed > iobuf.out.size
+ ? (long)(iobuf.out.len + needed - iobuf.out.size) : 0L);
+ }
+ break;
- rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
- "(%s bytes received so far) [%s]\n",
- big_num(stats.total_read), who_am_i());
+ case PIO_NEED_MSGROOM:
+ /* We never resize the circular message buffer. */
+ if (iobuf.msg.size < needed) {
+ fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
+ (long)needed, (long)iobuf.msg.size);
+ exit_cleanup(RERR_PROTOCOL);
+ }
- exit_cleanup(RERR_STREAMIO);
-}
+ if (DEBUG_GTE(IO, 3)) {
+ rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
+ who_am_i(), (long)needed,
+ iobuf.msg.len + needed > iobuf.msg.size
+ ? (long)(iobuf.msg.len + needed - iobuf.msg.size) : 0L);
+ }
+ break;
-/* Read from a socket with I/O timeout. return the number of bytes
- * read. If no bytes can be read then exit, never return a number <= 0.
- *
- * TODO: If the remote shell connection fails, then current versions
- * actually report an "unexpected EOF" error here. Since it's a
- * fairly common mistake to try to use rsh when ssh is required, we
- * should trap that: if we fail to read any data at all, we should
- * give a better explanation. We can tell whether the connection has
- * started by looking e.g. at whether the remote version is known yet. */
-static int read_timeout(int fd, char *buf, size_t len)
-{
- int n, cnt = 0;
+ case 0:
+ if (DEBUG_GTE(IO, 3))
+ rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
+ break;
- io_flush(FULL_FLUSH);
+ default:
+ exit_cleanup(RERR_UNSUPPORTED);
+ }
- while (cnt == 0) {
- /* until we manage to read *something* */
- fd_set r_fds, w_fds;
- struct timeval tv;
- int maxfd = fd;
- int count;
+ while (1) {
+ switch (flags & PIO_NEED_FLAGS) {
+ case PIO_NEED_INPUT:
+ if (iobuf.in.len >= needed)
+ goto double_break;
+ break;
+ case PIO_NEED_OUTROOM:
+ /* Note that iobuf.out_empty_len doesn't factor into this check
+ * because iobuf.out.len already holds any needed header len. */
+ if (iobuf.out.len + needed <= iobuf.out.size)
+ goto double_break;
+ break;
+ case PIO_NEED_MSGROOM:
+ if (iobuf.msg.len + needed <= iobuf.msg.size)
+ goto double_break;
+ break;
+ }
+
+ max_fd = -1;
FD_ZERO(&r_fds);
+ FD_ZERO(&e_fds);
+ if (iobuf.in_fd >= 0 && iobuf.in.size - iobuf.in.len) {
+ if (!read_batch || batch_fd >= 0) {
+ FD_SET(iobuf.in_fd, &r_fds);
+ FD_SET(iobuf.in_fd, &e_fds);
+ }
+ if (iobuf.in_fd > max_fd)
+ max_fd = iobuf.in_fd;
+ }
+
+ /* Only do more filesfrom processing if there is enough room in the out buffer. */
+ if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
+ FD_SET(ff_forward_fd, &r_fds);
+ if (ff_forward_fd > max_fd)
+ max_fd = ff_forward_fd;
+ }
+
FD_ZERO(&w_fds);
- FD_SET(fd, &r_fds);
- if (io_filesfrom_f_out >= 0) {
- int new_fd;
- if (ff_buf.len == 0) {
- if (io_filesfrom_f_in >= 0) {
- FD_SET(io_filesfrom_f_in, &r_fds);
- new_fd = io_filesfrom_f_in;
- } else {
- io_filesfrom_f_out = -1;
- new_fd = -1;
+ if (iobuf.out_fd >= 0) {
+ if (iobuf.raw_flushing_ends_before
+ || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
+ if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
+ /* The iobuf.raw_flushing_ends_before value can point off the end
+ * of the iobuf.out buffer for a while, for easier subtracting. */
+ iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
+
+ SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
+ ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
+
+ if (DEBUG_GTE(IO, 1)) {
+ rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
+ who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
+ }
+
+ /* reserve room for the next MSG_DATA header */
+ iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
+ if (iobuf.raw_data_header_pos >= iobuf.out.size)
+ iobuf.raw_data_header_pos -= iobuf.out.size;
+ else if (iobuf.raw_data_header_pos + 4 > iobuf.out.size) {
+ /* The 4-byte header won't fit at the end of the buffer,
+ * so we'll temporarily reduce the output buffer's size
+ * and put the header at the start of the buffer. */
+ reduce_iobuf_size(&iobuf.out, iobuf.raw_data_header_pos);
+ iobuf.raw_data_header_pos = 0;
+ }
+ /* Yes, it is possible for this to make len > size for a while. */
+ iobuf.out.len += 4;
}
- } else {
- FD_SET(io_filesfrom_f_out, &w_fds);
- new_fd = io_filesfrom_f_out;
+
+ empty_buf_len = iobuf.out_empty_len;
+ out = &iobuf.out;
+ } else if (iobuf.msg.len) {
+ empty_buf_len = 0;
+ out = &iobuf.msg;
+ } else
+ out = NULL;
+ if (out) {
+ FD_SET(iobuf.out_fd, &w_fds);
+ if (iobuf.out_fd > max_fd)
+ max_fd = iobuf.out_fd;
+ }
+ } else
+ out = NULL;
+
+ if (max_fd < 0) {
+ switch (flags & PIO_NEED_FLAGS) {
+ case PIO_NEED_INPUT:
+ iobuf.in.len = 0;
+ if (kluge_around_eof == 2)
+ exit_cleanup(0);
+ if (iobuf.in_fd == -2)
+ whine_about_eof(True);
+ rprintf(FERROR, "error in perform_io: no fd for input.\n");
+ exit_cleanup(RERR_PROTOCOL);
+ case PIO_NEED_OUTROOM:
+ case PIO_NEED_MSGROOM:
+ msgs2stderr = 1;
+ drain_multiplex_messages();
+ if (iobuf.out_fd == -2)
+ whine_about_eof(True);
+ rprintf(FERROR, "error in perform_io: no fd for output.\n");
+ exit_cleanup(RERR_PROTOCOL);
+ default:
+ /* No stated needs, so I guess this is OK. */
+ break;
}
- if (new_fd > maxfd)
- maxfd = new_fd;
+ break;
}
- if (extra_flist_sending_enabled && !defer_forwarding_messages) {
- if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
- && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
+ if (extra_flist_sending_enabled) {
+ if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD)
tv.tv_sec = 0;
else {
extra_flist_sending_enabled = False;
tv.tv_sec = select_timeout;
tv.tv_usec = 0;
- errno = 0;
-
- count = select(maxfd + 1, &r_fds, &w_fds, NULL, &tv);
+ cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
- if (count <= 0) {
- if (errno == EBADF) {
- defer_forwarding_messages = 0;
+ if (cnt <= 0) {
+ if (cnt < 0 && errno == EBADF) {
+ msgs2stderr = 1;
exit_cleanup(RERR_SOCKETIO);
}
- if (extra_flist_sending_enabled && !defer_forwarding_messages) {
+ if (extra_flist_sending_enabled) {
extra_flist_sending_enabled = False;
send_extra_file_list(sock_f_out, -1);
extra_flist_sending_enabled = !flist_eof;
} else
- check_timeout();
- continue;
+ check_timeout((flags & PIO_NEED_INPUT) != 0);
+ FD_ZERO(&r_fds); /* Just in case... */
+ FD_ZERO(&w_fds);
}
- if (io_filesfrom_f_out >= 0) {
- if (ff_buf.len) {
- if (FD_ISSET(io_filesfrom_f_out, &w_fds)) {
- int l = write(io_filesfrom_f_out,
- ff_buf.buf + ff_buf.pos,
- ff_buf.len);
- if (l > 0) {
- if (!(ff_buf.len -= l))
- ff_buf.pos = 0;
- else
- ff_buf.pos += l;
- } else if (errno != EINTR) {
- /* XXX should we complain? */
- io_filesfrom_f_out = -1;
- }
+ if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
+ size_t len, pos = iobuf.in.pos + iobuf.in.len;
+ int n;
+ if (pos >= iobuf.in.size) {
+ pos -= iobuf.in.size;
+ len = iobuf.in.size - iobuf.in.len;
+ } else
+ len = iobuf.in.size - pos;
+ if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
+ if (n == 0) {
+ /* Signal that input has become invalid. */
+ if (!read_batch || batch_fd < 0 || am_generator)
+ iobuf.in_fd = -2;
+ batch_fd = -1;
+ continue;
+ }
+ if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
+ n = 0;
+ else {
+ /* Don't write errors on a dead socket. */
+ if (iobuf.in_fd == sock_f_in) {
+ if (am_sender)
+ msgs2stderr = 1;
+ rsyserr(FERROR_SOCKET, errno, "read error");
+ } else
+ rsyserr(FERROR, errno, "read error");
+ exit_cleanup(RERR_SOCKETIO);
+ }
+ }
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
+
+ if (io_timeout) {
+ last_io_in = time(NULL);
+ if (flags & PIO_NEED_INPUT)
+ maybe_send_keepalive(last_io_in, 0);
+ }
+ stats.total_read += n;
+
+ iobuf.in.len += n;
+ }
+
+ if (out && FD_ISSET(iobuf.out_fd, &w_fds)) {
+ size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
+ int n;
+
+ if (bwlimit_writemax && len > bwlimit_writemax)
+ len = bwlimit_writemax;
+
+ if (out->pos + len > out->size)
+ len = out->size - out->pos;
+ if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
+ if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
+ n = 0;
+ else {
+ /* Don't write errors on a dead socket. */
+ msgs2stderr = 1;
+ iobuf.out_fd = -2;
+ iobuf.out.len = iobuf.msg.len = iobuf.raw_flushing_ends_before = 0;
+ rsyserr(FERROR_SOCKET, errno, "[%s] write error", who_am_i());
+ drain_multiplex_messages();
+ exit_cleanup(RERR_SOCKETIO);
}
- } else if (io_filesfrom_f_in >= 0) {
- if (FD_ISSET(io_filesfrom_f_in, &r_fds)) {
+ }
+ if (msgs2stderr && DEBUG_GTE(IO, 2)) {
+ rprintf(FINFO, "[%s] %s sent=%ld\n",
+ who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
+ }
+
+ if (io_timeout)
+ last_io_out = time(NULL);
+ stats.total_written += n;
+
+ if (bwlimit_writemax)
+ sleep_for_bwlimit(n);
+
+ if ((out->pos += n) == out->size) {
+ if (iobuf.raw_flushing_ends_before)
+ iobuf.raw_flushing_ends_before -= out->size;
+ out->pos = 0;
+ restore_iobuf_size(out);
+ } else if (out->pos == iobuf.raw_flushing_ends_before)
+ iobuf.raw_flushing_ends_before = 0;
+ if ((out->len -= n) == empty_buf_len) {
+ out->pos = 0;
+ restore_iobuf_size(out);
+ if (empty_buf_len)
+ iobuf.raw_data_header_pos = 0;
+ }
+ }
+
+ /* We need to help prevent deadlock by doing what reading
+ * we can whenever we are here trying to write. */
+ if (IN_MULTIPLEXED_AND_READY && !(flags & PIO_NEED_INPUT)) {
+ while (!iobuf.raw_input_ends_before && iobuf.in.len > 512)
+ read_a_msg();
+ if (flist_receiving_enabled && iobuf.in.len > 512)
+ wait_for_receiver(); /* generator only */
+ }
+
+ if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
+ /* This can potentially flush all output and enable
+ * multiplexed output, so keep this last in the loop
+ * and be sure to not cache anything that would break
+ * such a change. */
+ forward_filesfrom_data();
+ }
+ }
+ double_break:
+
+ data = iobuf.in.buf + iobuf.in.pos;
+
+ if (flags & PIO_CONSUME_INPUT) {
+ iobuf.in.len -= needed;
+ iobuf.in.pos += needed;
+ if (iobuf.in.pos == iobuf.raw_input_ends_before)
+ iobuf.raw_input_ends_before = 0;
+ if (iobuf.in.pos >= iobuf.in.size) {
+ iobuf.in.pos -= iobuf.in.size;
+ if (iobuf.raw_input_ends_before)
+ iobuf.raw_input_ends_before -= iobuf.in.size;
+ }
+ }
+
+ return data;
+}
+
+static void raw_read_buf(char *buf, size_t len)
+{
+ size_t pos = iobuf.in.pos;
+ char *data = perform_io(len, PIO_INPUT_AND_CONSUME);
+ if (iobuf.in.pos <= pos && len) {
+ size_t siz = len - iobuf.in.pos;
+ memcpy(buf, data, siz);
+ memcpy(buf + siz, iobuf.in.buf, iobuf.in.pos);
+ } else
+ memcpy(buf, data, len);
+}
+
+static int32 raw_read_int(void)
+{
+ char *data, buf[4];
+ if (iobuf.in.size - iobuf.in.pos >= 4)
+ data = perform_io(4, PIO_INPUT_AND_CONSUME);
+ else
+ raw_read_buf(data = buf, 4);
+ return IVAL(data, 0);
+}
+
+void noop_io_until_death(void)
+{
+ char buf[1024];
+
+ kluge_around_eof = 2;
+ /* Setting an I/O timeout ensures that if something inexplicably weird
+ * happens, we won't hang around forever. */
+ if (!io_timeout)
+ set_io_timeout(60);
+
+ while (1)
+ read_buf(iobuf.in_fd, buf, sizeof buf);
+}
+
+/* Buffer a message for the multiplexed output stream. Is not used for (normal) MSG_DATA. */
+int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
+{
+ char *hdr;
+ size_t needed, pos;
+ BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
+
+ if (!OUT_MULTIPLEXED)
+ return 0;
+
+ if (want_debug)
+ rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
+
+ /* When checking for enough free space for this message, we need to
+ * make sure that there is space for the 4-byte header, plus we'll
+ * assume that we may waste up to 3 bytes (if the header doesn't fit
+ * at the physical end of the buffer). */
#ifdef ICONV_OPTION
- xbuf *ibuf = filesfrom_convert ? &iconv_buf : &ff_buf;
-#else
- xbuf *ibuf = &ff_buf;
+ if (convert > 0 && ic_send == (iconv_t)-1)
+ convert = 0;
+ if (convert > 0) {
+ /* Ensuring double-size room leaves space for maximal conversion expansion. */
+ needed = len*2 + 4 + 3;
+ } else
#endif
- int l = read(io_filesfrom_f_in, ibuf->buf, ibuf->size);
- if (l <= 0) {
- if (l == 0 || errno != EINTR) {
- /* Send end-of-file marker */
- memcpy(ff_buf.buf, "\0\0", 2);
- ff_buf.len = ff_lastchar? 2 : 1;
- ff_buf.pos = 0;
- io_filesfrom_f_in = -1;
- }
- } else {
+ needed = len + 4 + 3;
+ if (iobuf.msg.len + needed > iobuf.msg.size)
+ perform_io(needed, PIO_NEED_MSGROOM);
+
+ pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
+ if (pos >= iobuf.msg.size)
+ pos -= iobuf.msg.size;
+ else if (pos + 4 > iobuf.msg.size) {
+ /* The 4-byte header won't fit at the end of the buffer,
+ * so we'll temporarily reduce the message buffer's size
+ * and put the header at the start of the buffer. */
+ reduce_iobuf_size(&iobuf.msg, pos);
+ pos = 0;
+ }
+ hdr = iobuf.msg.buf + pos;
+
+ iobuf.msg.len += 4; /* Allocate room for the coming header bytes. */
+
#ifdef ICONV_OPTION
- if (filesfrom_convert) {
- iconv_buf.pos = 0;
- iconv_buf.len = l;
- iconvbufs(ic_send, &iconv_buf, &ff_buf,
- ICB_EXPAND_OUT|ICB_INCLUDE_BAD|ICB_INCLUDE_INCOMPLETE);
- l = ff_buf.len;
- }
+ if (convert > 0) {
+ xbuf inbuf;
+
+ INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
+
+ len = iobuf.msg.len;
+ iconvbufs(ic_send, &inbuf, &iobuf.msg,
+ ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
+ if (inbuf.len > 0) {
+ rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
+ exit_cleanup(RERR_UNSUPPORTED);
+ }
+ len = iobuf.msg.len - len;
+ } else
#endif
- if (!eol_nulls) {
- char *s = ff_buf.buf + l;
- /* Transform CR and/or LF into '\0' */
- while (s-- > ff_buf.buf) {
- if (*s == '\n' || *s == '\r')
- *s = '\0';
- }
- }
- if (!ff_lastchar) {
- /* Last buf ended with a '\0', so don't
- * let this buf start with one. */
- while (l && ff_buf.buf[ff_buf.pos] == '\0')
- ff_buf.pos++, l--;
- }
- if (!l)
- ff_buf.pos = 0;
- else {
- char *f = ff_buf.buf + ff_buf.pos;
- char *t = f;
- char *eob = f + l;
- /* Eliminate any multi-'\0' runs. */
- while (f != eob) {
- if (!(*t++ = *f++)) {
- while (f != eob && !*f)
- f++, l--;
- }
- }
- ff_lastchar = f[-1];
- }
- ff_buf.len = l;
- }
- }
+ {
+ size_t siz;
+
+ if ((pos += 4) == iobuf.msg.size)
+ pos = 0;
+
+ /* Handle a split copy if we wrap around the end of the circular buffer. */
+ if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
+ memcpy(iobuf.msg.buf + pos, buf, siz);
+ memcpy(iobuf.msg.buf, buf + siz, len - siz);
+ } else
+ memcpy(iobuf.msg.buf + pos, buf, len);
+
+ iobuf.msg.len += len;
+ }
+
+ SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
+
+ if (want_debug && convert > 0)
+ rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
+
+ return 1;
+}
+
+void send_msg_int(enum msgcode code, int num)
+{
+ char numbuf[4];
+
+ if (DEBUG_GTE(IO, 1))
+ rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
+
+ SIVAL(numbuf, 0, num);
+ send_msg(code, numbuf, 4, -1);
+}
+
+static void got_flist_entry_status(enum festatus status, int ndx)
+{
+ struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
+
+ if (remove_source_files) {
+ active_filecnt--;
+ active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
+ }
+
+ if (inc_recurse)
+ flist->in_progress--;
+
+ switch (status) {
+ case FES_SUCCESS:
+ if (remove_source_files)
+ send_msg_int(MSG_SUCCESS, ndx);
+ if (preserve_hard_links) {
+ struct file_struct *file = flist->files[ndx - flist->ndx_start];
+ if (F_IS_HLINKED(file)) {
+ flist_ndx_push(&hlink_list, ndx);
+ flist->in_progress++;
}
}
+ break;
+ case FES_REDO:
+ if (read_batch) {
+ if (inc_recurse)
+ flist->in_progress++;
+ break;
+ }
+ if (inc_recurse)
+ flist->to_redo++;
+ flist_ndx_push(&redo_list, ndx);
+ break;
+ case FES_NO_SEND:
+ break;
+ }
+}
- if (!FD_ISSET(fd, &r_fds))
- continue;
+/* Note the fds used for the main socket (which might really be a pipe
+ * for a local transfer, but we can ignore that). */
+void io_set_sock_fds(int f_in, int f_out)
+{
+ sock_f_in = f_in;
+ sock_f_out = f_out;
+}
+
+void set_io_timeout(int secs)
+{
+ io_timeout = secs;
+ allowed_lull = (io_timeout + 1) / 2;
+
+ if (!io_timeout || allowed_lull > SELECT_TIMEOUT)
+ select_timeout = SELECT_TIMEOUT;
+ else
+ select_timeout = allowed_lull;
+
+ if (read_batch)
+ allowed_lull = 0;
+}
+
+static void check_for_d_option_error(const char *msg)
+{
+ static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
+ char *colon;
+ int saw_d = 0;
+
+ if (*msg != 'r'
+ || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
+ return;
- n = read(fd, buf, len);
+ msg += sizeof REMOTE_OPTION_ERROR - 1;
+ if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
+ || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
+ return;
+
+ for ( ; *msg != ':'; msg++) {
+ if (*msg == 'd')
+ saw_d = 1;
+ else if (*msg == 'e')
+ break;
+ else if (strchr(rsync263_opts, *msg) == NULL)
+ return;
+ }
+
+ if (saw_d) {
+ rprintf(FWARNING,
+ "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
+ }
+}
+
+/* This is used by the generator to limit how many file transfers can
+ * be active at once when --remove-source-files is specified. Without
+ * this, sender-side deletions were mostly happening at the end. */
+void increment_active_files(int ndx, int itemizing, enum logcode code)
+{
+ while (1) {
+ /* TODO: tune these limits? */
+ int limit = active_bytecnt >= 128*1024 ? 10 : 50;
+ if (active_filecnt < limit)
+ break;
+ check_for_finished_files(itemizing, code, 0);
+ if (active_filecnt < limit)
+ break;
+ wait_for_receiver();
+ }
- if (n <= 0) {
- if (n == 0)
- whine_about_eof(fd); /* Doesn't return. */
- if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
- continue;
+ active_filecnt++;
+ active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
+}
- /* Don't write errors on a dead socket. */
- if (fd == sock_f_in) {
- if (am_sender)
- io_multiplexing_out = 0;
- rsyserr(FERROR_SOCKET, errno, "read error");
- } else
- rsyserr(FERROR, errno, "read error");
- exit_cleanup(RERR_STREAMIO);
- }
+int get_redo_num(void)
+{
+ return flist_ndx_pop(&redo_list);
+}
- buf += n;
- len -= n;
- cnt += n;
+int get_hlink_num(void)
+{
+ return flist_ndx_pop(&hlink_list);
+}
- if (fd == sock_f_in && io_timeout)
- last_io_in = time(NULL);
+/* When we're the receiver and we have a local --files-from list of names
+ * that needs to be sent over the socket to the sender, we have to do two
+ * things at the same time: send the sender a list of what files we're
+ * processing and read the incoming file+info list from the sender. We do
+ * this by making recv_file_list() call forward_filesfrom_data(), which
+ * will ensure that we forward data to the sender until we get some data
+ * for recv_file_list() to use. */
+void start_filesfrom_forwarding(int fd)
+{
+ if (protocol_version < 31 && OUT_MULTIPLEXED) {
+ /* Older protocols send the files-from data w/o packaging
+ * it in multiplexed I/O packets, so temporarily switch
+ * to buffered I/O to match this behavior. */
+ iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
+ ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
}
+ ff_forward_fd = fd;
- return cnt;
+ alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
}
/* Read a line into the "buf" buffer. */
int read_line(int fd, char *buf, size_t bufsiz, int flags)
{
char ch, *s, *eob;
- int cnt;
#ifdef ICONV_OPTION
if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
#endif
eob = s + bufsiz - 1;
while (1) {
- cnt = read(fd, &ch, 1);
- if (cnt < 0 && (errno == EWOULDBLOCK
- || errno == EINTR || errno == EAGAIN)) {
- struct timeval tv;
- fd_set r_fds, e_fds;
- FD_ZERO(&r_fds);
- FD_SET(fd, &r_fds);
- FD_ZERO(&e_fds);
- FD_SET(fd, &e_fds);
- tv.tv_sec = select_timeout;
- tv.tv_usec = 0;
- if (!select(fd+1, &r_fds, NULL, &e_fds, &tv))
- check_timeout();
- /*if (FD_ISSET(fd, &e_fds))
- rprintf(FINFO, "select exception on fd %d\n", fd); */
- continue;
- }
- if (cnt != 1)
+ /* We avoid read_byte() for files because files can return an EOF. */
+ if (fd == iobuf.in_fd)
+ ch = read_byte(fd);
+ else if (safe_read(fd, &ch, 1) == 0)
break;
if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
/* Skip empty lines if dumping comments. */
iconv_buf.pos = 0;
iconv_buf.len = s - iconv_buf.buf;
iconvbufs(ic_recv, &iconv_buf, &outbuf,
- ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE);
+ ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
outbuf.buf[outbuf.len] = '\0';
return outbuf.len;
}
*argv_p = argv;
}
-int io_start_buffering_out(int f_out)
+BOOL io_start_buffering_out(int f_out)
{
- if (iobuf_out) {
- assert(f_out == iobuf_f_out);
- return 0;
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
+
+ if (iobuf.out.buf) {
+ if (iobuf.out_fd == -1)
+ iobuf.out_fd = f_out;
+ else
+ assert(f_out == iobuf.out_fd);
+ return False;
}
- if (!(iobuf_out = new_array(char, IO_BUFFER_SIZE)))
- out_of_memory("io_start_buffering_out");
- iobuf_out_cnt = 0;
- iobuf_f_out = f_out;
- return 1;
+
+ alloc_xbuf(&iobuf.out, ROUND_UP_1024(IO_BUFFER_SIZE * 2));
+ iobuf.out_fd = f_out;
+
+ return True;
}
-int io_start_buffering_in(int f_in)
+BOOL io_start_buffering_in(int f_in)
{
- if (iobuf_in) {
- assert(f_in == iobuf_f_in);
- return 0;
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
+
+ if (iobuf.in.buf) {
+ if (iobuf.in_fd == -1)
+ iobuf.in_fd = f_in;
+ else
+ assert(f_in == iobuf.in_fd);
+ return False;
}
- iobuf_in_siz = 2 * IO_BUFFER_SIZE;
- if (!(iobuf_in = new_array(char, iobuf_in_siz)))
- out_of_memory("io_start_buffering_in");
- iobuf_f_in = f_in;
- return 1;
+
+ alloc_xbuf(&iobuf.in, ROUND_UP_1024(IO_BUFFER_SIZE));
+ iobuf.in_fd = f_in;
+
+ return True;
}
-void io_end_buffering_in(void)
+void io_end_buffering_in(BOOL free_buffers)
{
- if (!iobuf_in)
- return;
- free(iobuf_in);
- iobuf_in = NULL;
- iobuf_in_ndx = 0;
- iobuf_in_remaining = 0;
- iobuf_f_in = -1;
+ if (msgs2stderr && DEBUG_GTE(IO, 2)) {
+ rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
+ who_am_i(), free_buffers ? "FREE" : "KEEP");
+ }
+
+ if (free_buffers)
+ free_xbuf(&iobuf.in);
+ else
+ iobuf.in.pos = iobuf.in.len = 0;
+
+ iobuf.in_fd = -1;
}
-void io_end_buffering_out(void)
+void io_end_buffering_out(BOOL free_buffers)
{
- if (!iobuf_out)
- return;
+ if (msgs2stderr && DEBUG_GTE(IO, 2)) {
+ rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
+ who_am_i(), free_buffers ? "FREE" : "KEEP");
+ }
+
io_flush(FULL_FLUSH);
- free(iobuf_out);
- iobuf_out = NULL;
- iobuf_f_out = -1;
+
+ if (free_buffers) {
+ free_xbuf(&iobuf.out);
+ free_xbuf(&iobuf.msg);
+ }
+
+ iobuf.out_fd = -1;
}
void maybe_flush_socket(int important)
{
- if (iobuf_out && iobuf_out_cnt
+ if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
&& (important || time(NULL) - last_io_out >= 5))
io_flush(NORMAL_FLUSH);
}
-void maybe_send_keepalive(void)
+/* Older rsync versions used to send either a MSG_NOOP (protocol 30) or a
+ * raw-data-based keep-alive (protocol 29), both of which implied forwarding of
+ * the message through the sender. Since the new timeout method does not need
+ * any forwarding, we just send an empty MSG_DATA message, which works with all
+ * rsync versions. This avoids any message forwarding, and leaves the raw-data
+ * stream alone (since we can never be quite sure if that stream is in the
+ * right state for a keep-alive message). */
+void maybe_send_keepalive(time_t now, int flags)
{
- if (time(NULL) - last_io_out >= allowed_lull) {
- if (!iobuf_out || !iobuf_out_cnt) {
- if (protocol_version < 29)
- return; /* there's nothing we can do */
- if (protocol_version >= 30)
- send_msg(MSG_NOOP, "", 0, 0);
- else {
- write_int(sock_f_out, cur_flist->used);
- write_shortint(sock_f_out, ITEM_IS_NEW);
- }
- }
- if (iobuf_out)
+ if (flags & MSK_ACTIVE_RECEIVER)
+ last_io_in = now; /* Fudge things when we're working hard on the files. */
+
+ if (now - last_io_out >= allowed_lull) {
+ /* The receiver is special: it only sends keep-alive messages if it is
+ * actively receiving data. Otherwise, it lets the generator timeout. */
+ if (am_receiver && now - last_io_in >= io_timeout)
+ return;
+
+ if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len)
+ send_msg(MSG_DATA, "", 0, 0);
+ if (!(flags & MSK_ALLOW_FLUSH)) {
+ /* Let the caller worry about writing out the data. */
+ } else if (iobuf.msg.len)
+ perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
+ else if (iobuf.out.len > iobuf.out_empty_len)
io_flush(NORMAL_FLUSH);
}
}
-void start_flist_forward(int f_in)
+void start_flist_forward(int ndx)
{
- assert(iobuf_out != NULL);
- assert(iobuf_f_out == msg_fd_out);
- flist_forward_from = f_in;
+ write_int(iobuf.out_fd, ndx);
+ forward_flist_data = 1;
}
-void stop_flist_forward()
+void stop_flist_forward(void)
{
- flist_forward_from = -1;
- io_flush(FULL_FLUSH);
-}
-
-/* Continue trying to read len bytes until all have been read.
- * Used to read raw bytes from a multiplexed source. */
-static void read_loop(int fd, char *buf, size_t len)
-{
- while (len) {
- int n = read_timeout(fd, buf, len);
-
- buf += n;
- len -= n;
- }
+ forward_flist_data = 0;
}
/* Read a message from a multiplexed source. */
-static void read_a_msg(int fd)
+static void read_a_msg(void)
{
- char line[BIGPATHBUFLEN];
+ char data[BIGPATHBUFLEN];
+ int tag, val;
size_t msg_bytes;
- int tag, flist_parent = -1, save_msg_fd_in = msg_fd_in;
- /* Temporarily disable msg_fd_in. This is needed to avoid looping back
- * to this routine from writefd_unbuffered(). */
- msg_fd_in = -1;
+ /* This ensures that perform_io() does not try to do any message reading
+ * until we've read all of the data for this message. We should also
+ * try to avoid calling things that will cause data to be written via
+ * perform_io() prior to this being reset to 1. */
+ iobuf.in_multiplexed = -1;
- read_loop(fd, line, 4);
- tag = IVAL(line, 0);
+ tag = raw_read_int();
msg_bytes = tag & 0xFFFFFF;
tag = (tag >> 24) - MPLEX_BASE;
- no_flush++;
+ if (DEBUG_GTE(IO, 1) && msgs2stderr)
+ rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
switch (tag) {
case MSG_DATA:
- if (msg_bytes > iobuf_in_siz) {
- if (!(iobuf_in = realloc_array(iobuf_in, char, msg_bytes)))
- out_of_memory("read_a_msg");
- iobuf_in_siz = msg_bytes;
- }
- read_loop(fd, iobuf_in, msg_bytes);
- iobuf_in_remaining = msg_bytes;
- iobuf_in_ndx = 0;
+ assert(iobuf.raw_input_ends_before == 0);
+ /* Though this does not yet read the data, we do mark where in
+ * the buffer the msg data will end once it is read. It is
+ * possible that this points off the end of the buffer, in
+ * which case the gradual reading of the input stream will
+ * cause this value to wrap around and eventually become real. */
+ if (msg_bytes)
+ iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
+ iobuf.in_multiplexed = 1;
break;
- case MSG_DONE:
- if (msg_bytes > 1 || !am_generator)
+ case MSG_STATS:
+ if (msg_bytes != sizeof stats.total_read || !am_generator)
goto invalid_msg;
- if (msg_bytes) {
- read_loop(fd, line, 1);
- stats.total_read = read_varlong(fd, 3);
- }
- msgdone_cnt++;
+ raw_read_buf((char*)&stats.total_read, sizeof stats.total_read);
+ iobuf.in_multiplexed = 1;
break;
case MSG_REDO:
if (msg_bytes != 4 || !am_generator)
goto invalid_msg;
- read_loop(fd, line, 4);
- got_flist_entry_status(FES_REDO, line);
+ val = raw_read_int();
+ iobuf.in_multiplexed = 1;
+ got_flist_entry_status(FES_REDO, val);
break;
- case MSG_FLIST:
- if (msg_bytes != 4 || !am_generator || !inc_recurse)
- goto invalid_msg;
- read_loop(fd, line, 4);
- /* Read extra file list from receiver. */
- if (DEBUG_GTE(FLIST, 2)) {
- rprintf(FINFO, "[%s] receiving flist for dir %d\n",
- who_am_i(), IVAL(line, 0));
- }
- flist_parent = IVAL(line, 0);
- break;
- case MSG_FLIST_EOF:
- if (msg_bytes != 0 || !am_generator || !inc_recurse)
+ case MSG_IO_ERROR:
+ if (msg_bytes != 4)
goto invalid_msg;
- flist_eof = 1;
+ val = raw_read_int();
+ iobuf.in_multiplexed = 1;
+ io_error |= val;
+ if (am_receiver)
+ send_msg_int(MSG_IO_ERROR, val);
break;
- case MSG_IO_ERROR:
- if (msg_bytes != 4 || am_sender)
+ case MSG_IO_TIMEOUT:
+ if (msg_bytes != 4 || am_server || am_generator)
goto invalid_msg;
- read_loop(fd, line, 4);
- io_error |= IVAL(line, 0);
- if (!am_generator)
- send_msg_int(MSG_IO_ERROR, IVAL(line, 0));
+ val = raw_read_int();
+ iobuf.in_multiplexed = 1;
+ if (!io_timeout || io_timeout > val) {
+ if (INFO_GTE(MISC, 2))
+ rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
+ set_io_timeout(val);
+ }
break;
case MSG_NOOP:
- if (am_sender)
- maybe_send_keepalive();
- break;
- case MSG_DEL_STATS:
- if (msg_bytes)
+ /* Support protocol-30 keep-alive method. */
+ if (msg_bytes != 0)
goto invalid_msg;
- read_del_stats(fd);
- if (am_sender && am_server)
- write_del_stats(sock_f_out);
+ iobuf.in_multiplexed = 1;
+ if (am_sender)
+ maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
break;
case MSG_DELETED:
- if (msg_bytes >= sizeof line)
+ if (msg_bytes >= sizeof data)
goto overflow;
if (am_generator) {
- read_loop(fd, line, msg_bytes);
- send_msg(MSG_DELETED, line, msg_bytes, 1);
+ raw_read_buf(data, msg_bytes);
+ iobuf.in_multiplexed = 1;
+ send_msg(MSG_DELETED, data, msg_bytes, 1);
break;
}
#ifdef ICONV_OPTION
xbuf outbuf, inbuf;
char ibuf[512];
int add_null = 0;
+ int flags = ICB_INCLUDE_BAD | ICB_INIT;
- INIT_CONST_XBUF(outbuf, line);
+ INIT_CONST_XBUF(outbuf, data);
INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
while (msg_bytes) {
- inbuf.len = msg_bytes > sizeof ibuf
- ? sizeof ibuf : msg_bytes;
- read_loop(fd, inbuf.buf, inbuf.len);
- if (!(msg_bytes -= inbuf.len)
- && !ibuf[inbuf.len-1])
+ size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
+ raw_read_buf(ibuf + inbuf.len, len);
+ inbuf.pos = 0;
+ inbuf.len += len;
+ if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
inbuf.len--, add_null = 1;
- if (iconvbufs(ic_send, &inbuf, &outbuf,
- ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE) < 0)
- goto overflow;
+ if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
+ if (errno == E2BIG)
+ goto overflow;
+ /* Buffer ended with an incomplete char, so move the
+ * bytes to the start of the buffer and continue. */
+ memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
+ }
+ flags &= ~ICB_INIT;
}
if (add_null) {
if (outbuf.len == outbuf.size)
msg_bytes = outbuf.len;
} else
#endif
- read_loop(fd, line, msg_bytes);
+ raw_read_buf(data, msg_bytes);
+ iobuf.in_multiplexed = 1;
/* A directory name was sent with the trailing null */
- if (msg_bytes > 0 && !line[msg_bytes-1])
- log_delete(line, S_IFDIR);
+ if (msg_bytes > 0 && !data[msg_bytes-1])
+ log_delete(data, S_IFDIR);
else {
- line[msg_bytes] = '\0';
- log_delete(line, S_IFREG);
+ data[msg_bytes] = '\0';
+ log_delete(data, S_IFREG);
}
break;
case MSG_SUCCESS:
inc_recurse ? "/inc" : "");
exit_cleanup(RERR_STREAMIO);
}
- read_loop(fd, line, 4);
+ val = raw_read_int();
+ iobuf.in_multiplexed = 1;
if (am_generator)
- got_flist_entry_status(FES_SUCCESS, line);
+ got_flist_entry_status(FES_SUCCESS, val);
else
- successful_send(IVAL(line, 0));
+ successful_send(val);
break;
case MSG_NO_SEND:
if (msg_bytes != 4)
goto invalid_msg;
- read_loop(fd, line, 4);
+ val = raw_read_int();
+ iobuf.in_multiplexed = 1;
if (am_generator)
- got_flist_entry_status(FES_NO_SEND, line);
+ got_flist_entry_status(FES_NO_SEND, val);
else
- send_msg_int(MSG_NO_SEND, IVAL(line, 0));
+ send_msg_int(MSG_NO_SEND, val);
break;
case MSG_ERROR_SOCKET:
case MSG_ERROR_UTF8:
if (!am_generator)
goto invalid_msg;
if (tag == MSG_ERROR_SOCKET)
- io_multiplexing_out = 0;
+ msgs2stderr = 1;
/* FALL THROUGH */
case MSG_INFO:
case MSG_ERROR:
case MSG_ERROR_XFER:
case MSG_WARNING:
- if (msg_bytes >= sizeof line) {
+ if (msg_bytes >= sizeof data) {
overflow:
rprintf(FERROR,
"multiplexing overflow %d:%lu [%s%s]\n",
inc_recurse ? "/inc" : "");
exit_cleanup(RERR_STREAMIO);
}
- read_loop(fd, line, msg_bytes);
- rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
+ raw_read_buf(data, msg_bytes);
+ iobuf.in_multiplexed = 1;
+ rwrite((enum logcode)tag, data, msg_bytes, !am_generator);
if (first_message) {
- if (list_only && !am_sender && tag == 1) {
- line[msg_bytes] = '\0';
- check_for_d_option_error(line);
+ if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof data) {
+ data[msg_bytes] = '\0';
+ check_for_d_option_error(data);
}
first_message = 0;
}
break;
+ case MSG_ERROR_EXIT:
+ if (msg_bytes == 4)
+ val = raw_read_int();
+ else if (msg_bytes == 0)
+ val = 0;
+ else
+ goto invalid_msg;
+ iobuf.in_multiplexed = 1;
+ if (DEBUG_GTE(EXIT, 3))
+ rprintf(FINFO, "[%s] got MSG_ERROR_EXIT with %ld bytes\n", who_am_i(), (long)msg_bytes);
+ if (msg_bytes == 0) {
+ if (!am_sender && !am_generator) {
+ if (DEBUG_GTE(EXIT, 3)) {
+ rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
+ who_am_i());
+ }
+ send_msg(MSG_ERROR_EXIT, "", 0, 0);
+ io_flush(FULL_FLUSH);
+ }
+ } else if (protocol_version >= 31) {
+ if (am_generator) {
+ if (DEBUG_GTE(EXIT, 3)) {
+ rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT with exit_code %d\n",
+ who_am_i(), val);
+ }
+ send_msg_int(MSG_ERROR_EXIT, val);
+ } else {
+ if (DEBUG_GTE(EXIT, 3)) {
+ rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
+ who_am_i());
+ }
+ send_msg(MSG_ERROR_EXIT, "", 0, 0);
+ }
+ }
+ /* Send a negative linenum so that we don't end up
+ * with a duplicate exit message. */
+ _exit_cleanup(val, __FILE__, 0 - __LINE__);
default:
rprintf(FERROR, "unexpected tag %d [%s%s]\n",
tag, who_am_i(), inc_recurse ? "/inc" : "");
exit_cleanup(RERR_STREAMIO);
}
- msg_fd_in = save_msg_fd_in;
- no_flush--;
-
- if (flist_parent >= 0) {
- struct file_list *flist = recv_file_list(fd);
- flist->parent_ndx = flist_parent;
-#ifdef SUPPORT_HARD_LINKS
- if (preserve_hard_links)
- match_hard_links(flist);
-#endif
- }
+ assert(iobuf.in_multiplexed > 0);
}
-/* Read from the file descriptor handling multiplexing and return the
- * number of bytes read. Never returns <= 0. */
-static int readfd_unbuffered(int fd, char *buf, size_t len)
+static void drain_multiplex_messages(void)
{
- int cnt = 0;
-
- if (!iobuf_in || fd != iobuf_f_in)
- return read_timeout(fd, buf, len);
-
- if (!io_multiplexing_in && iobuf_in_remaining == 0) {
- iobuf_in_remaining = read_timeout(fd, iobuf_in, iobuf_in_siz);
- iobuf_in_ndx = 0;
- }
-
- while (cnt == 0) {
- if (iobuf_in_remaining) {
- len = MIN(len, iobuf_in_remaining);
- memcpy(buf, iobuf_in + iobuf_in_ndx, len);
- iobuf_in_ndx += len;
- iobuf_in_remaining -= len;
- cnt = len;
- break;
+ while (IN_MULTIPLEXED_AND_READY && iobuf.in.len) {
+ if (iobuf.raw_input_ends_before) {
+ size_t raw_len = iobuf.raw_input_ends_before - iobuf.in.pos;
+ iobuf.raw_input_ends_before = 0;
+ if (raw_len >= iobuf.in.len) {
+ iobuf.in.len = 0;
+ break;
+ }
+ iobuf.in.len -= raw_len;
+ if ((iobuf.in.pos += raw_len) >= iobuf.in.size)
+ iobuf.in.pos -= iobuf.in.size;
}
- read_a_msg(fd);
+ read_a_msg();
}
-
- if (iobuf_in_remaining == 0)
- io_flush(NORMAL_FLUSH);
-
- return cnt;
}
-/* Do a buffered read from fd. Don't return until all N bytes have
- * been read. If all N can't be read then exit with an error. */
-static void readfd(int fd, char *buffer, size_t N)
+void wait_for_receiver(void)
{
- int cnt;
- size_t total = 0;
-
- while (total < N) {
- cnt = readfd_unbuffered(fd, buffer + total, N-total);
- total += cnt;
- }
-
- if (fd == write_batch_monitor_in) {
- if ((size_t)write(batch_fd, buffer, total) != total)
- exit_cleanup(RERR_FILEIO);
+ if (!iobuf.raw_input_ends_before)
+ read_a_msg();
+
+ if (iobuf.raw_input_ends_before) {
+ int ndx = read_int(iobuf.in_fd);
+ if (ndx < 0) {
+ switch (ndx) {
+ case NDX_FLIST_EOF:
+ flist_eof = 1;
+ if (DEBUG_GTE(FLIST, 3))
+ rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
+ break;
+ case NDX_DONE:
+ msgdone_cnt++;
+ break;
+ default:
+ exit_cleanup(RERR_STREAMIO);
+ }
+ } else {
+ struct file_list *flist;
+ flist_receiving_enabled = False;
+ if (DEBUG_GTE(FLIST, 2)) {
+ rprintf(FINFO, "[%s] receiving flist for dir %d\n",
+ who_am_i(), ndx);
+ }
+ flist = recv_file_list(iobuf.in_fd);
+ flist->parent_ndx = ndx;
+#ifdef SUPPORT_HARD_LINKS
+ if (preserve_hard_links)
+ match_hard_links(flist);
+#endif
+ flist_receiving_enabled = True;
+ }
}
-
- if (fd == flist_forward_from)
- writefd(iobuf_f_out, buffer, total);
-
- if (fd == sock_f_in)
- stats.total_read += total;
}
unsigned short read_shortint(int f)
{
char b[2];
- readfd(f, b, 2);
+ read_buf(f, b, 2);
return (UVAL(b, 1) << 8) + UVAL(b, 0);
}
char b[4];
int32 num;
- readfd(f, b, 4);
+ read_buf(f, b, 4);
num = IVAL(b, 0);
#if SIZEOF_INT32 > 4
if (num & (int32)0x80000000)
int32 read_varint(int f)
{
union {
- char b[5];
- int32 x;
+ char b[5];
+ int32 x;
} u;
uchar ch;
int extra;
u.x = 0;
- readfd(f, (char*)&ch, 1);
+ ch = read_byte(f);
extra = int_byte_extra[ch / 4];
if (extra) {
uchar bit = ((uchar)1<<(8-extra));
rprintf(FERROR, "Overflow in read_varint()\n");
exit_cleanup(RERR_STREAMIO);
}
- readfd(f, u.b, extra);
+ read_buf(f, u.b, extra);
u.b[extra] = ch & (bit-1);
} else
u.b[0] = ch;
int64 read_varlong(int f, uchar min_bytes)
{
union {
- char b[9];
- int64 x;
+ char b[9];
+ int64 x;
} u;
char b2[8];
int extra;
#else
u.x = 0;
#endif
- readfd(f, b2, min_bytes);
+ read_buf(f, b2, min_bytes);
memcpy(u.b, b2+1, min_bytes-1);
extra = int_byte_extra[CVAL(b2, 0) / 4];
if (extra) {
rprintf(FERROR, "Overflow in read_varlong()\n");
exit_cleanup(RERR_STREAMIO);
}
- readfd(f, u.b + min_bytes - 1, extra);
+ read_buf(f, u.b + min_bytes - 1, extra);
u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
#if SIZEOF_INT64 < 8
if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
exit_cleanup(RERR_UNSUPPORTED);
#else
- readfd(f, b, 8);
+ read_buf(f, b, 8);
return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
#endif
}
void read_buf(int f, char *buf, size_t len)
{
- readfd(f,buf,len);
+ if (f != iobuf.in_fd) {
+ if (safe_read(f, buf, len) != len)
+ whine_about_eof(False); /* Doesn't return. */
+ goto batch_copy;
+ }
+
+ if (!IN_MULTIPLEXED) {
+ raw_read_buf(buf, len);
+ total_data_read += len;
+ if (forward_flist_data)
+ write_buf(iobuf.out_fd, buf, len);
+ batch_copy:
+ if (f == write_batch_monitor_in)
+ safe_write(batch_fd, buf, len);
+ return;
+ }
+
+ while (1) {
+ size_t siz;
+
+ while (!iobuf.raw_input_ends_before)
+ read_a_msg();
+
+ siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
+ if (siz >= iobuf.in.size)
+ siz = iobuf.in.size;
+ raw_read_buf(buf, siz);
+ total_data_read += siz;
+
+ if (forward_flist_data)
+ write_buf(iobuf.out_fd, buf, siz);
+
+ if (f == write_batch_monitor_in)
+ safe_write(batch_fd, buf, siz);
+
+ if ((len -= siz) == 0)
+ break;
+ buf += siz;
+ }
}
void read_sbuf(int f, char *buf, size_t len)
{
- readfd(f, buf, len);
+ read_buf(f, buf, len);
buf[len] = '\0';
}
uchar read_byte(int f)
{
uchar c;
- readfd(f, (char *)&c, 1);
+ read_buf(f, (char*)&c, 1);
return c;
}
}
if (len)
- readfd(f, buf, len);
+ read_buf(f, buf, len);
buf[len] = '\0';
return len;
}
write_int(f, sum->remainder);
}
-/**
- * Sleep after writing to limit I/O bandwidth usage.
+/* Sleep after writing to limit I/O bandwidth usage.
*
* @todo Rather than sleeping after each write, it might be better to
* use some kind of averaging. The current algorithm seems to always
* round small waits up to guarantee that we actually wait at least the
* requested number of microseconds, this can become grossly inaccurate.
* We therefore keep track of the bytes we've written over time and only
- * sleep when the accumulated delay is at least 1 tenth of a second.
- **/
+ * sleep when the accumulated delay is at least 1 tenth of a second. */
static void sleep_for_bwlimit(int bytes_written)
{
static struct timeval prior_tv;
#define ONE_SEC 1000000L /* # of microseconds in a second */
- if (!bwlimit_writemax)
- return;
-
total_written += bytes_written;
gettimeofday(&start_tv, NULL);
total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
}
-static const char *what_fd_is(int fd)
-{
- static char buf[20];
-
- if (fd == sock_f_out)
- return "socket";
- else if (fd == msg_fd_out)
- return "message fd";
- else if (fd == batch_fd)
- return "batch file";
- else {
- snprintf(buf, sizeof buf, "fd %d", fd);
- return buf;
- }
-}
-
-/* Write len bytes to the file descriptor fd, looping as necessary to get
- * the job done and also (in certain circumstances) reading any data on
- * msg_fd_in to avoid deadlock.
- *
- * This function underlies the multiplexing system. The body of the
- * application never calls this function directly. */
-static void writefd_unbuffered(int fd, const char *buf, size_t len)
-{
- size_t n, total = 0;
- fd_set w_fds, r_fds, e_fds;
- int maxfd, count, cnt, using_r_fds;
- int defer_inc = 0;
- struct timeval tv;
-
- if (no_flush++)
- defer_forwarding_messages++, defer_inc++;
-
- while (total < len) {
- FD_ZERO(&w_fds);
- FD_SET(fd, &w_fds);
- FD_ZERO(&e_fds);
- FD_SET(fd, &e_fds);
- maxfd = fd;
-
- if (msg_fd_in >= 0 && iobuf_in_remaining == 0) {
- FD_ZERO(&r_fds);
- FD_SET(msg_fd_in, &r_fds);
- if (msg_fd_in > maxfd)
- maxfd = msg_fd_in;
- using_r_fds = 1;
- } else
- using_r_fds = 0;
-
- tv.tv_sec = select_timeout;
- tv.tv_usec = 0;
-
- errno = 0;
- count = select(maxfd + 1, using_r_fds ? &r_fds : NULL,
- &w_fds, &e_fds, &tv);
-
- if (count <= 0) {
- if (count < 0 && errno == EBADF)
- exit_cleanup(RERR_SOCKETIO);
- check_timeout();
- continue;
- }
-
- /*if (FD_ISSET(fd, &e_fds))
- rprintf(FINFO, "select exception on fd %d\n", fd); */
-
- if (using_r_fds && FD_ISSET(msg_fd_in, &r_fds))
- read_a_msg(msg_fd_in);
-
- if (!FD_ISSET(fd, &w_fds))
- continue;
-
- n = len - total;
- if (bwlimit_writemax && n > bwlimit_writemax)
- n = bwlimit_writemax;
- cnt = write(fd, buf + total, n);
-
- if (cnt <= 0) {
- if (cnt < 0) {
- if (errno == EINTR)
- continue;
- if (errno == EWOULDBLOCK || errno == EAGAIN) {
- msleep(1);
- continue;
- }
- }
-
- /* Don't try to write errors back across the stream. */
- if (fd == sock_f_out)
- io_multiplexing_out = 0;
- /* Don't try to write errors down a failing msg pipe. */
- if (am_server && fd == msg_fd_out)
- exit_cleanup(RERR_STREAMIO);
- rsyserr(FERROR, errno,
- "writefd_unbuffered failed to write %ld bytes to %s [%s]",
- (long)len, what_fd_is(fd), who_am_i());
- /* If the other side is sending us error messages, try
- * to grab any messages they sent before they died. */
- while (!am_server && fd == sock_f_out && io_multiplexing_in) {
- char buf[1024];
- set_io_timeout(30);
- ignore_timeout = 0;
- readfd_unbuffered(iobuf_f_in, buf, sizeof buf);
- }
- exit_cleanup(RERR_STREAMIO);
- }
-
- total += cnt;
- defer_forwarding_messages++, defer_inc++;
-
- if (fd == sock_f_out) {
- if (io_timeout || am_generator)
- last_io_out = time(NULL);
- sleep_for_bwlimit(cnt);
- }
- }
-
- no_flush--;
- if (keep_defer_forwarding)
- defer_inc--;
- if (!(defer_forwarding_messages -= defer_inc) && !no_flush)
- msg_flush();
-}
-
-int io_flush(int flush_it_all)
-{
- int flushed_something = 0;
-
- if (no_flush)
- return 0;
-
- if (iobuf_out_cnt) {
- if (io_multiplexing_out)
- mplex_write(iobuf_f_out, MSG_DATA, iobuf_out, iobuf_out_cnt, 0);
- else
- writefd_unbuffered(iobuf_f_out, iobuf_out, iobuf_out_cnt);
- iobuf_out_cnt = 0;
- flushed_something = 1;
- }
-
- if (flush_it_all && !defer_forwarding_messages && msg_queue.head) {
- msg_flush();
- flushed_something = 1;
- }
-
- return flushed_something;
-}
-
-static void writefd(int fd, const char *buf, size_t len)
+void io_flush(int flush_it_all)
{
- if (fd == sock_f_out)
- stats.total_written += len;
-
- if (fd == write_batch_monitor_out)
- writefd_unbuffered(batch_fd, buf, len);
-
- if (!iobuf_out || fd != iobuf_f_out) {
- writefd_unbuffered(fd, buf, len);
- return;
- }
-
- while (len) {
- int n = MIN((int)len, IO_BUFFER_SIZE - iobuf_out_cnt);
- if (n > 0) {
- memcpy(iobuf_out+iobuf_out_cnt, buf, n);
- buf += n;
- len -= n;
- iobuf_out_cnt += n;
- }
-
- if (iobuf_out_cnt == IO_BUFFER_SIZE)
- io_flush(NORMAL_FLUSH);
+ if (iobuf.out.len > iobuf.out_empty_len) {
+ if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
+ perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
+ else /* NORMAL_FLUSH: flush at least 1 byte */
+ perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
}
+ if (iobuf.msg.len)
+ perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
}
void write_shortint(int f, unsigned short x)
char b[2];
b[0] = (char)x;
b[1] = (char)(x >> 8);
- writefd(f, b, 2);
+ write_buf(f, b, 2);
}
void write_int(int f, int32 x)
{
char b[4];
SIVAL(b, 0, x);
- writefd(f, b, 4);
+ write_buf(f, b, 4);
}
void write_varint(int f, int32 x)
else
*b = b[cnt];
- writefd(f, b, cnt);
+ write_buf(f, b, cnt);
}
void write_varlong(int f, int64 x, uchar min_bytes)
else
*b = b[cnt];
- writefd(f, b, cnt);
+ write_buf(f, b, cnt);
}
/*
SIVAL(s, 0, x);
if (x <= 0x7FFFFFFF && x >= 0) {
- writefd(f, s, 4);
+ write_buf(f, s, 4);
return;
}
#else
memset(b, 0xFF, 4);
SIVAL(s, 4, x >> 32);
- writefd(f, b, 12);
+ write_buf(f, b, 12);
#endif
}
void write_buf(int f, const char *buf, size_t len)
{
- writefd(f,buf,len);
+ size_t pos, siz;
+
+ if (f != iobuf.out_fd) {
+ safe_write(f, buf, len);
+ goto batch_copy;
+ }
+
+ if (iobuf.out.len + len > iobuf.out.size)
+ perform_io(len, PIO_NEED_OUTROOM);
+
+ pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
+ if (pos >= iobuf.out.size)
+ pos -= iobuf.out.size;
+
+ /* Handle a split copy if we wrap around the end of the circular buffer. */
+ if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
+ memcpy(iobuf.out.buf + pos, buf, siz);
+ memcpy(iobuf.out.buf, buf + siz, len - siz);
+ } else
+ memcpy(iobuf.out.buf + pos, buf, len);
+
+ iobuf.out.len += len;
+ total_data_written += len;
+
+ batch_copy:
+ if (f == write_batch_monitor_out)
+ safe_write(batch_fd, buf, len);
}
-/** Write a string to the connection */
+/* Write a string to the connection */
void write_sbuf(int f, const char *buf)
{
- writefd(f, buf, strlen(buf));
+ write_buf(f, buf, strlen(buf));
}
void write_byte(int f, uchar c)
{
- writefd(f, (char *)&c, 1);
+ write_buf(f, (char *)&c, 1);
}
void write_vstring(int f, const char *str, int len)
}
*lb = len;
- writefd(f, (char*)lenbuf, lb - lenbuf + 1);
+ write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
if (len)
- writefd(f, str, len);
+ write_buf(f, str, len);
}
/* Send a file-list index using a byte-reduction method. */
prev_positive = ndx;
} else if (ndx == NDX_DONE) {
*b = 0;
- writefd(f, b, 1);
+ write_buf(f, b, 1);
return;
} else {
b[cnt++] = (char)0xFF;
b[cnt++] = (char)(diff >> 8);
b[cnt++] = (char)diff;
}
- writefd(f, b, cnt);
+ write_buf(f, b, cnt);
}
/* Receive a file-list index using a byte-reduction method. */
if (protocol_version < 30)
return read_int(f);
- readfd(f, b, 1);
+ read_buf(f, b, 1);
if (CVAL(b, 0) == 0xFF) {
- readfd(f, b, 1);
+ read_buf(f, b, 1);
prev_ptr = &prev_negative;
} else if (CVAL(b, 0) == 0)
return NDX_DONE;
else
prev_ptr = &prev_positive;
if (CVAL(b, 0) == 0xFE) {
- readfd(f, b, 2);
+ read_buf(f, b, 2);
if (CVAL(b, 0) & 0x80) {
b[3] = CVAL(b, 0) & ~0x80;
b[0] = b[1];
- readfd(f, b+1, 2);
+ read_buf(f, b+1, 2);
num = IVAL(b, 0);
} else
num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
/* Read a line of up to bufsiz-1 characters into buf. Strips
* the (required) trailing newline and all carriage returns.
* Returns 1 for success; 0 for I/O error or truncation. */
-int read_line_old(int f, char *buf, size_t bufsiz)
+int read_line_old(int fd, char *buf, size_t bufsiz, int eof_ok)
{
+ assert(fd != iobuf.in_fd);
bufsiz--; /* leave room for the null */
while (bufsiz > 0) {
- buf[0] = 0;
- read_buf(f, buf, 1);
- if (buf[0] == 0)
+ if (safe_read(fd, buf, 1) == 0) {
+ if (eof_ok)
+ break;
return 0;
- if (buf[0] == '\n')
+ }
+ if (*buf == '\0')
+ return 0;
+ if (*buf == '\n')
break;
- if (buf[0] != '\r') {
+ if (*buf != '\r') {
buf++;
bufsiz--;
}
va_end(ap);
if (len < 0)
- exit_cleanup(RERR_STREAMIO);
+ exit_cleanup(RERR_PROTOCOL);
if (len > (int)sizeof buf) {
rprintf(FERROR, "io_printf() was too long for the buffer.\n");
- exit_cleanup(RERR_STREAMIO);
+ exit_cleanup(RERR_PROTOCOL);
}
write_sbuf(fd, buf);
}
-/** Setup for multiplexing a MSG_* stream with the data stream. */
-void io_start_multiplex_out(int f)
+/* Setup for multiplexing a MSG_* stream with the data stream. */
+void io_start_multiplex_out(int fd)
{
- io_flush(NORMAL_FLUSH);
- io_start_buffering_out(f);
- io_multiplexing_out = 1;
-}
+ io_flush(FULL_FLUSH);
-/** Setup for multiplexing a MSG_* stream with the data stream. */
-void io_start_multiplex_in(int f)
-{
- io_flush(NORMAL_FLUSH);
- io_start_buffering_in(f);
- io_multiplexing_in = 1;
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
+
+ if (!iobuf.msg.buf)
+ alloc_xbuf(&iobuf.msg, ROUND_UP_1024(IO_BUFFER_SIZE));
+
+ iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
+ io_start_buffering_out(fd);
+
+ iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
+ iobuf.out.len += 4;
}
-/** Write an message to the multiplexed data stream. */
-int io_multiplex_write(enum msgcode code, const char *buf, size_t len, int convert)
+/* Setup for multiplexing a MSG_* stream with the data stream. */
+void io_start_multiplex_in(int fd)
{
- if (!io_multiplexing_out)
- return 0;
- io_flush(NORMAL_FLUSH);
- stats.total_written += (len+4);
- mplex_write(iobuf_f_out, code, buf, len, convert);
- return 1;
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
+
+ iobuf.in_multiplexed = 1; /* See also IN_MULTIPLEXED */
+ io_start_buffering_in(fd);
}
-void io_end_multiplex_in(void)
+int io_end_multiplex_in(int mode)
{
- io_multiplexing_in = 0;
- io_end_buffering_in();
+ int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
+
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
+
+ iobuf.in_multiplexed = 0;
+ if (mode == MPLX_SWITCHING)
+ iobuf.raw_input_ends_before = 0;
+ else
+ assert(iobuf.raw_input_ends_before == 0);
+ if (mode != MPLX_TO_BUFFERED)
+ io_end_buffering_in(mode);
+
+ return ret;
}
-/** Stop output multiplexing. */
-void io_end_multiplex_out(void)
+int io_end_multiplex_out(int mode)
{
- io_multiplexing_out = 0;
- io_end_buffering_out();
+ int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
+
+ if (msgs2stderr && DEBUG_GTE(IO, 2))
+ rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
+
+ if (mode != MPLX_TO_BUFFERED)
+ io_end_buffering_out(mode);
+ else
+ io_flush(FULL_FLUSH);
+
+ iobuf.out.len = 0;
+ iobuf.out_empty_len = 0;
+
+ return ret;
}
void start_write_batch(int fd)
* is involved. */
write_int(batch_fd, protocol_version);
if (protocol_version >= 30)
- write_byte(batch_fd, inc_recurse);
+ write_byte(batch_fd, compat_flags);
write_int(batch_fd, checksum_seed);
if (am_sender)