1 # The Makefile for rsync (configure creates it from Makefile.in).
4 datarootdir=@datarootdir@
5 exec_prefix=@exec_prefix@
32 SIMD_x86_64=simd-checksum-x86_64.o
33 ASM_x86_64=lib/md5-asm-x86_64.o
35 GENFILES=configure.sh aclocal.m4 config.h.in proto.h proto.h-tstamp rsync.1 rsync.1.html \
36 rsync-ssl.1 rsync-ssl.1.html rsyncd.conf.5 rsyncd.conf.5.html
37 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
38 lib/pool_alloc.h lib/mdigest.h lib/md-defines.h version.h
39 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
40 lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
41 zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
42 zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
43 OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
44 util.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
45 OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
46 fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
47 OBJS3=progress.o pipe.o @ASM@
48 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
49 popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
50 popt/popthelp.o popt/poptparse.o
51 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) @SIMD@ $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@
53 TLS_OBJ = tls.o syscall.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
55 # Programs we must have to run the test cases
56 CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
57 testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
59 CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test
61 # Objects for CHECK_PROGS to clean
62 CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
64 # note that the -I. is needed to handle config.h when using VPATH
67 $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
71 all: Makefile rsync$(EXEEXT) stunnel-rsyncd.conf @MAKE_MAN@
75 -$(MKDIR_P) $(DESTDIR)$(bindir)
76 $(INSTALLCMD) $(INSTALL_STRIP) -m 755 rsync$(EXEEXT) $(DESTDIR)$(bindir)
77 $(INSTALLCMD) -m 755 $(srcdir)/rsync-ssl $(DESTDIR)$(bindir)
78 -$(MKDIR_P) $(DESTDIR)$(mandir)/man1
79 -$(MKDIR_P) $(DESTDIR)$(mandir)/man5
80 if test -f rsync.1; then $(INSTALLMAN) -m 644 rsync.1 $(DESTDIR)$(mandir)/man1; fi
81 if test -f rsync-ssl.1; then $(INSTALLMAN) -m 644 rsync-ssl.1 $(DESTDIR)$(mandir)/man1; fi
82 if test -f rsyncd.conf.5; then $(INSTALLMAN) -m 644 rsyncd.conf.5 $(DESTDIR)$(mandir)/man5; fi
84 install-ssl-daemon: stunnel-rsyncd.conf
85 -$(MKDIR_P) $(DESTDIR)/etc/stunnel
86 $(INSTALLCMD) -m 644 stunnel-rsyncd.conf $(DESTDIR)/etc/stunnel/rsyncd.conf
87 @if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
88 echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
91 install-all: install install-ssl-daemon
94 $(MAKE) INSTALL_STRIP='-s' install
96 rsync$(EXEEXT): $(OBJS)
97 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
100 $(CHECK_OBJS): $(HEADERS)
101 tls.o xattrs.o: lib/sysxattrs.h
102 options.o: latest-year.h help-rsync.h help-rsyncd.h
103 exclude.o: default-cvsignore.h
104 loadparm.o: default-dont-compress.h daemon-parm.h
108 default-cvsignore.h default-dont-compress.h: rsync.1.md define-from-md.awk
109 $(AWK) -f $(srcdir)/define-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
111 help-rsync.h help-rsyncd.h: rsync.1.md help-from-md.awk
112 $(AWK) -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
114 daemon-parm.h: daemon-parm.txt daemon-parm.awk
115 $(AWK) -f $(srcdir)/daemon-parm.awk $(srcdir)/daemon-parm.txt
117 rounding.h: rounding.c rsync.h proto.h
118 @for r in 0 1 3; do \
119 if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
120 echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
121 if test -f "$$HOME/build_farm/build_test.fns"; then \
122 echo "EXTRA_ROUNDING is $$r" >&2; \
128 @if test -f rounding.h; then : ; else \
129 cat rounding.out 1>&2; \
130 echo "Failed to create rounding.h!" 1>&2; \
135 simd-checksum-x86_64.o: simd-checksum-x86_64.cpp
136 @$(srcdir)/cmdormsg disable-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-checksum-x86_64.cpp
138 lib/md5-asm-x86_64.o: lib/md5-asm-x86_64.S config.h lib/md-defines.h
139 @$(srcdir)/cmdormsg disable-asm $(CC) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/lib/md5-asm-x86_64.S
141 tls$(EXEEXT): $(TLS_OBJ)
142 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
144 testrun$(EXEEXT): testrun.o
145 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o
147 getgroups$(EXEEXT): getgroups.o
148 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
150 getfsdev$(EXEEXT): getfsdev.o
151 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
153 TRIMSLASH_OBJ = trimslash.o syscall.o t_stub.o lib/compat.o lib/snprintf.o
154 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
155 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
157 T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
158 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
159 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
162 conf: configure.sh config.h.in
165 gen: conf proto.h man
169 rsync -aic $(GENFILES) $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/
171 aclocal.m4: $(srcdir)/m4/*.m4
172 aclocal -I $(srcdir)/m4
174 configure.sh config.h.in: configure.ac aclocal.m4
175 @if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
176 @if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
177 autoconf -o configure.sh
178 autoheader && touch config.h.in
179 @if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
180 echo "configure.sh is unchanged."; \
181 rm configure.sh.old; \
183 echo "configure.sh has CHANGED."; \
185 @if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
186 echo "config.h.in is unchanged."; \
187 rm config.h.in.old; \
189 echo "config.h.in has CHANGED."; \
191 @if test -f configure.sh.old -o -f config.h.in.old; then \
192 if test "$(MAKECMDGOALS)" = reconfigure; then \
193 echo 'Continuing with "make reconfigure".'; \
195 echo 'You may need to run:'; \
196 echo ' make reconfigure'; \
202 reconfigure: configure.sh
203 ./config.status --recheck
210 Makefile: Makefile.in config.status configure.sh config.h.in
211 @if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
213 @if diff Makefile Makefile.old >/dev/null 2>&1; then \
214 echo "Makefile is unchanged."; \
217 if test "$(MAKECMDGOALS)" = reconfigure; then \
218 echo 'Continuing with "make reconfigure".'; \
220 echo "Makefile updated -- rerun your make command."; \
225 stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
226 sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf
229 proto: proto.h-tstamp
231 proto.h: proto.h-tstamp
232 @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
234 proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c config.h daemon-parm.h
235 $(AWK) -f $(srcdir)/mkproto.awk $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h
238 man: rsync.1 rsync-ssl.1 rsyncd.conf.5
240 rsync.1: rsync.1.md md2man version.h Makefile
241 @$(srcdir)/maybe-make-man $(srcdir) rsync.1.md
243 rsync-ssl.1: rsync-ssl.1.md md2man version.h Makefile
244 @$(srcdir)/maybe-make-man $(srcdir) rsync-ssl.1.md
246 rsyncd.conf.5: rsyncd.conf.5.md md2man version.h Makefile
247 @$(srcdir)/maybe-make-man $(srcdir) rsyncd.conf.5.md
251 rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
252 rounding rounding.h *.old rsync*.1 rsync*.5 rsync*.html \
253 daemon-parm.h help-*.h default-*.h
259 # We try to delete built files from both the source and build
260 # directories, just in case somebody previously configured things in
261 # the source directory.
264 rm -f Makefile config.h config.status
265 rm -f stunnel-rsyncd.conf
266 rm -f lib/dummy popt/dummy zlib/dummy
267 rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
268 rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
269 rm -f config.cache config.log
270 rm -f $(srcdir)/config.cache $(srcdir)/config.log
271 rm -f shconfig $(srcdir)/shconfig
273 rm -rf autom4te.cache
275 # this target is really just for my use. It only works on a limited
276 # range of machines and is used to produce a list of potentially
277 # dead (ie. unused) functions in the code. (tridge)
280 nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
281 nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
282 comm -13 nmused.txt nmfns.txt
284 # 'check' is the GNU name, 'test' is the name for everybody else :-)
288 # There seems to be no standard way to specify some variables as
289 # exported from a Makefile apart from listing them like this.
291 # This depends on building rsync; if we need any helper programs it
292 # should depend on them too.
294 # We try to run the scripts with POSIX mode on, in the hope that will
295 # catch Bash-isms earlier even if we're running on GNU. Of course, we
296 # might lose in the future where POSIX diverges from old sh.
299 check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
300 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
303 check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
304 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
307 check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
308 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30
310 wildtest.o: wildtest.c t_stub.o lib/wildmatch.c rsync.h config.h
311 wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
312 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
314 testsuite/chown-fake.test:
315 ln -s chown.test $(srcdir)/testsuite/chown-fake.test
317 testsuite/devices-fake.test:
318 ln -s devices.test $(srcdir)/testsuite/devices-fake.test
320 testsuite/xattrs-hlink.test:
321 ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test
323 # This does *not* depend on building or installing: you can use it to
324 # check a version installed from a binary or some other source tree,
328 installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
329 POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
331 # TODO: Add 'dist' target; need to know which files will be included
333 # Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
336 splint +unixlib +gnuextensions -weak rsync.c
340 cd $(srcdir) && rm dox/html/* && doxygen
342 # for maintainers only
343 .PHONY: doxygen-upload
345 rsync -avzv $(srcdir)/dox/html/ --delete \
346 $${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/