git.samba.org - sfrench/cifs-2.6.git/log

Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:

- support for idmapped mounts in CephFS (Christian Brauner, Alexander
   Mikhalitsyn).

   The series was originally developed by Christian and later picked up
   and brought over the finish line by Alexander, who also contributed
   an enabler on the MDS side (separate owner_{u,g}id fields on the
   wire).

   The required exports for mnt_idmap_{get,put}() in VFS have been acked
   by Christian and received no objection from Christoph.

- a churny change in CephFS logging to include cluster and client
   identifiers in log and debug messages (Xiubo Li).

   This would help in scenarios with dozens of CephFS mounts on the same
   node which are getting increasingly common, especially in the
   Kubernetes world.

* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
  ceph: allow idmapped mounts
  ceph: allow idmapped atomic_open inode op
  ceph: allow idmapped set_acl inode op
  ceph: allow idmapped setattr inode op
  ceph: pass idmap to __ceph_setattr
  ceph: allow idmapped permission inode op
  ceph: allow idmapped getattr inode op
  ceph: pass an idmapping to mknod/symlink/mkdir
  ceph: add enable_unsafe_idmap module parameter
  ceph: handle idmapped mounts in create_request_message()
  ceph: stash idmapping in mdsc request
  fs: export mnt_idmap_get/mnt_idmap_put
  libceph, ceph: move mdsmap.h to fs/ceph
  ceph: print cluster fsid and client global_id in all debug logs
  ceph: rename _to_client() to _to_fs_client()
  ceph: pass the mdsc to several helpers
  libceph: add doutc and *_client debug macros support

Merge tag 'riscv-for-linus-6.7-mw2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- Support for handling misaligned accesses in S-mode

- Probing for misaligned access support is now properly cached and
   handled in parallel

- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
   NAPOT extensions

- Performance improvements for TLB flushing

- Support for many new relocations in the module loader

- Various bug fixes and cleanups

* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  riscv: Optimize bitops with Zbb extension
  riscv: Rearrange hwcap.h and cpufeature.h
  drivers: perf: Do not broadcast to other cpus when starting a counter
  drivers: perf: Check find_first_bit() return value
  of: property: Add fw_devlink support for msi-parent
  RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
  riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
  riscv: Don't use PGD entries for the linear mapping
  RISC-V: Probe misaligned access speed in parallel
  RISC-V: Remove __init on unaligned_emulation_finish()
  RISC-V: Show accurate per-hart isa in /proc/cpuinfo
  RISC-V: Don't rely on positional structure initialization
  riscv: Add tests for riscv module loading
  riscv: Add remaining module relocations
  riscv: Avoid unaligned access when relocating modules
  riscv: split cache ops out of dma-noncoherent.c
  riscv: Improve flush_tlb_kernel_range()
  riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
  riscv: Improve flush_tlb_range() for hugetlb pages
  riscv: Improve tlb_flush()
  ...

Merge tag 'mips_6.7' of git://git./linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

- removed AR7 platform support

- cleanups and fixes

* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: AR7: remove platform
  watchdog: ar7_wdt: remove driver to prepare for platform removal
  vlynq: remove bus driver
  mtd: parsers: ar7: remove support
  serial: 8250: remove AR7 support
  arch: mips: remove ReiserFS from defconfig
  MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
  MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
  MIPS: KVM: Fix a build warning about variable set but not used
  MIPS: Remove dead code in relocate_new_kernel
  mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
  mips: dts: ralink: mt7621: define each reset as an item
  mips: dts: ingenic: Remove unneeded probe-type properties
  MIPS: loongson32: Remove dma.h and nand.h

Merge tag 'net-6.7-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.

  Current release - regressions:

   - sched: fix SKB_NOT_DROPPED_YET splat under debug config

  Current release - new code bugs:

   - tcp:
       - fix usec timestamps with TCP fastopen
       - fix possible out-of-bounds reads in tcp_hash_fail()
       - fix SYN option room calculation for TCP-AO

   - tcp_sigpool: fix some off by one bugs

   - bpf: fix compilation error without CGROUPS

   - ptp:
       - ptp_read() should not release queue
       - fix tsevqs corruption

  Previous releases - regressions:

   - llc: verify mac len before reading mac header

  Previous releases - always broken:

   - bpf:
       - fix check_stack_write_fixed_off() to correctly spill imm
       - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
       - check map->usercnt after timer->timer is assigned

   - dsa: lan9303: consequently nested-lock physical MDIO

   - dccp/tcp: call security_inet_conn_request() after setting IP addr

   - tg3: fix the TX ring stall due to incorrect full ring handling

   - phylink: initialize carrier state at creation

   - ice: fix direction of VF rules in switchdev mode

  Misc:

   - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"

* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: ti: icss-iep: fix setting counter value
  ptp: fix corrupted list in ptp_open
  ptp: ptp_read should not release queue
  net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
  net: kcm: fill in MODULE_DESCRIPTION()
  net/sched: act_ct: Always fill offloading tuple iifidx
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
  drivers/net/ppp: use standard array-copy-function
  net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
  virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
  r8169: respect userspace disabling IFF_MULTICAST
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  net: phylink: initialize carrier state at creation
  test/vsock: add dobule bind connect test
  test/vsock: refactor vsock_accept
  ...

Merge tag 'v6.7-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash and hides the Kconfig sub-options for
  the jitter RNG"

* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ahash - Set using_shash for cloned ahash wrapper over shash
  crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT

Merge tag 'input-for-v6.7-rc0' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a number of input drivers has been converted to use facilities
   provided by the device core to instantiate driver-specific attributes
   instead of using devm_device_add_group() and similar APIs

- platform input devices have been converted to use remove() callback
   returning void

- a fix for use-after-free when tearing down a Synaptics RMI device

- a few flexible arrays in input structures have been annotated with
   __counted_by to help hardening efforts

- handling of vddio supply in cyttsp5 driver

- other miscellaneous fixups

* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
  Input: walkera0701 - use module_parport_driver macro to simplify the code
  Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
  dt-bindings: input: fsl,scu-key: Document wakeup-source
  Input: cyttsp5 - add handling for vddio regulator
  dt-bindings: input: cyttsp5: document vddio-supply
  Input: tegra-kbc - use device_get_match_data()
  Input: Annotate struct ff_device with __counted_by
  Input: axp20x-pek - avoid needless newline removal
  Input: mt - annotate struct input_mt with __counted_by
  Input: leds - annotate struct input_leds with __counted_by
  Input: evdev - annotate struct evdev_client with __counted_by
  Input: synaptics-rmi4 - replace deprecated strncpy
  Input: wm97xx-core - convert to platform remove callback returning void
  Input: wm831x-ts - convert to platform remove callback returning void
  Input: ti_am335x_tsc - convert to platform remove callback returning void
  Input: sun4i-ts - convert to platform remove callback returning void
  Input: stmpe-ts - convert to platform remove callback returning void
  Input: pcap_ts - convert to platform remove callback returning void
  Input: mc13783_ts - convert to platform remove callback returning void
  Input: mainstone-wm97xx - convert to platform remove callback returning void
  ...

Merge tag 'for-6.7-rc1-part2' of git://git./linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
"This contains one patch which slipped through the cracks (iproc), a
  core sanitizing improvement as the new memdup_array_user() helper went
  upstream (i2c-dev), and two driver bugfixes (designware, cp2615)"

* tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cp2615: Fix 'assignment to __be16' warning
  i2c: dev: copy userspace array safely
  i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
  i2c: iproc: handle invalid slave state

Merge tag 'linux-watchdog-6.7-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- add support for Amlogic C3 and S4 SoCs

- add IT8613 ID

- add MSM8226 and MSM8974 compatibles

- other small fixes and improvements

* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
  watchdog: mlx-wdt: Parameter desctiption warning fix
  watchdog: aspeed: Add support for aspeed,reset-mask DT property
  dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
  watchdog: apple: Deactivate on suspend
  dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
  dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
  wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
  drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
  drivers: watchdog: marvell_gti: fix zero pretimeout handling
  watchdog: marvell_gti: Replace of_platform.h with explicit includes
  watchdog: imx_sc_wdt: continue if the wdog already enabled
  watchdog: st_lpc: Use device_get_match_data()
  watchdog: wdat_wdt: Add timeout value as a param in ping method
  watchdog: gpio_wdt: Make use of device properties
  sbsa_gwdt: Calculate timeout with 64-bit math
  watchdog: ixp4xx: Make sure restart always works
  watchdog: it87_wdt: add IT8613 ID
  watchdog: marvell_gti_wdt: Fix error code in probe()
  Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
  ...

Merge tag 'pwm/for-6.7-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"This contains a few fixes and a bunch of cleanups, a lot of which is
  in preparation for Uwe's character device support that may be ready in
  time for the next merge window"

* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: samsung: Document new member .channel in struct samsung_pwm_chip
  pwm: bcm2835: Add support for suspend/resume
  pwm: brcmstb: Checked clk_prepare_enable() return value
  pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
  pwm: pxa: Explicitly include correct DT includes
  pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: samsung: Consistently use the same name for driver data
  pwm: vt8500: Simplify using devm functions
  pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: sprd: Provide a helper to cast a chip to driver data
  pwm: spear: Simplify using devm functions
  pwm: mtk-disp: Simplify using devm_pwmchip_add()
  pwm: imx-tpm: Simplify using devm functions
  pwm: brcmstb: Simplify using devm functions
  pwm: bcm2835: Simplify using devm functions
  pwm: bcm-iproc: Simplify using devm functions
  pwm: Adapt sysfs API documentation to reality
  pwm: dwc: add PWM bit unset in get_state call
  pwm: dwc: make timer clock configurable
  pwm: dwc: split pci out of core driver
  ...

Merge tag 'iommu-updates-v6.7' of git://git./linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
"Core changes:
   - Make default-domains mandatory for all IOMMU drivers
   - Remove group refcounting
   - Add generic_single_device_group() helper and consolidate drivers
   - Cleanup map/unmap ops
   - Scaling improvements for the IOVA rcache depot
   - Convert dart & iommufd to the new domain_alloc_paging()

  ARM-SMMU:
   - Device-tree binding update:
       - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
   - SMMUv2:
       - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
   - SMMUv3:
       - Large refactoring of the context descriptor code to move the CD
         table into the master, paving the way for '->set_dev_pasid()'
         support on non-SVA domains
   - Minor cleanups to the SVA code

  Intel VT-d:
   - Enable debugfs to dump domain attached to a pasid
   - Remove an unnecessary inline function

  AMD IOMMU:
   - Initial patches for SVA support (not complete yet)

  S390 IOMMU:
   - DMA-API conversion and optimized IOTLB flushing

  And some smaller fixes and improvements"

* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
  iommu/dart: Remove the force_bypass variable
  iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
  iommu/dart: Convert to domain_alloc_paging()
  iommu/dart: Move the blocked domain support to a global static
  iommu/dart: Use static global identity domains
  iommufd: Convert to alloc_domain_paging()
  iommu/vt-d: Use ops->blocked_domain
  iommu/vt-d: Update the definition of the blocking domain
  iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
  Revert "iommu/vt-d: Remove unused function"
  iommu/amd: Remove DMA_FQ type from domain allocation path
  iommu: change iommu_map_sgtable to return signed values
  iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
  iommu/vt-d: debugfs: Support dumping a specified page table
  iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
  iommu/vt-d: debugfs: Dump entry pointing to huge page
  iommu/vt-d: Remove unused function
  iommu/arm-smmu-v3-sva: Remove bond refcount
  iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
  iommu/arm-smmu-v3: Rename cdcfg to cd_table
  ...

riscv: Optimize bitops with Zbb extension

This patch leverages the alternative mechanism to dynamically optimize
bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
Zbb ext is not supported by the runtime CPU, legacy implementation is
used. If Zbb is supported, then the optimized variants will be selected
via alternative patching.

The legacy bitops support is taken from the generic C implementation as
fallback.

If the parameter is a build-time constant, we leverage compiler builtin to
calculate the result directly, this approach is inspired by x86 bitops
implementation.

EFI stub runs before the kernel, so alternative mechanism should not be
used there, this patch introduces a macro NO_ALTERNATIVE for this purpose.

Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-3-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Rearrange hwcap.h and cpufeature.h

Now hwcap.h and cpufeature.h are mutually including each other, and most of
the variable/API declarations in hwcap.h are implemented in cpufeature.c,
so, it's better to move them into cpufeature.h and leave only macros for
ISA extension logical IDs in hwcap.h.

BTW, the riscv_isa_extension_mask macro is not used now, so this patch
removes it.

Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-2-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch "drivers: perf: Do not broadcast to other cpus when starting a counter"

This is really just a single patch, but since the offending fix hasn't
yet made it to my for-next I'm merging it here.

Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

drivers: perf: Do not broadcast to other cpus when starting a counter

This command:

$ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000

gives rise to this kernel warning:

[  444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436
[  444.364515] Modules linked in:
[  444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73
[  444.364771] Hardware name: riscv-virtio,qemu (DT)
[  444.364868] epc : smp_call_function_many_cond+0x42c/0x436
[  444.364917]  ra : on_each_cpu_cond_mask+0x20/0x32
[  444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800
[  444.364966]  gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0
[  444.364982]  t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0
[  444.364998]  s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000
[  444.365013]  a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100
[  444.365029]  a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000
[  444.365044]  s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98
[  444.365060]  s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000
[  444.365075]  s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001
[  444.365090]  s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6
[  444.365104]  t5 : 0000000400000000 t6 : ff60000002e010d0
[  444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[  444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436
[  444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32
[  444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa
[  444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66
[  444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac
[  444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c
[  444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e
[  444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96
[  444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52
[  444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98
[  444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a
[  444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da
[  444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a
[  444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114
[  444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a
[  444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46
[  444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74
[  444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e
[  444.365796] ---[ end trace 0000000000000000 ]---

That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic
in riscv SBI mmap support") was wrong since there is no need to broadcast
to other cpus when starting a counter, that's only needed in mmap when
the counters could have already been started on other cpus, so simply
remove this broadcast.

Fixes: 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #On
Link: https://lore.kernel.org/r/20231026084010.11888-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

drivers: perf: Check find_first_bit() return value

We must check the return value of find_first_bit() before using the
return value as an index array since it happens to overflow the array
and then panic:

[  107.318430] Kernel BUG [#1]
[  107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G            E      6.6.0-rc6ubuntu-defconfig #2
[  107.319465] Hardware name: riscv-virtio,qemu (DT)
[  107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae
[  107.319840]  ra : pmu_sbi_ovf_handler+0x52/0x3ae
[  107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350
[  107.319884]  gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480
[  107.319899]  t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520
[  107.319921]  s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff
[  107.319936]  a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000
[  107.319951]  a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55
[  107.319965]  s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f
[  107.319980]  s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000
[  107.319995]  s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0
[  107.320009]  s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000
[  107.320023]  t5 : ffffaf7f80000000 t6 : ffffaf8000000000
[  107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[  107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae
[  107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0
[  107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36
[  107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e
[  107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86
[  107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96
[  107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097
[  107.320585] ---[ end trace 0000000000000000 ]---
[  107.320704] Kernel panic - not syncing: Fatal exception in interrupt
[  107.320775] SMP: stopping secondary CPUs
[  107.321219] Kernel Offset: 0x0 from 0xffffffff80000000
[  107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231109082128.40777-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

net: ti: icss-iep: fix setting counter value

Currently icss_iep_set_counter() writes the upper 32-bits of the
counter value to both the lower and upper counter registers, so
fix this by writing the appropriate value to the lower register.

Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/r/20231107120037.1513546-1-diogo.ivo@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge patch series "Linux RISC-V AIA Preparatory Series"

These two  ended up in the AIA series, but they're really independent
improvements.

* b4-shazam-merge:
  of: property: Add fw_devlink support for msi-parent
  RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs

Link: https://lore.kernel.org/r/20231027154254.355853-1-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

of: property: Add fw_devlink support for msi-parent

This allows fw_devlink to create device links between consumers of
a MSI and the supplier of the MSI.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20231027154254.355853-3-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs

The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails
for HARTs disabled in the DT. This results in the following warning
thrown by the RISC-V INTC driver for the E-core on SiFive boards:

[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller

The riscv_of_parent_hartid() is only expected to read the hartid
from the DT so we directly call of_get_cpu_hwid() instead of calling
riscv_of_processor_hartid().

Fixes: ad635e723e17 ("riscv: cpu: Add 64bit hartid support on RV64")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

ptp: fix corrupted list in ptp_open

There is no lock protection when writing ptp->tsevqs in ptp_open() and
ptp_release(), which can cause data corruption, use spin lock to avoid this
issue.

Moreover, ptp_release() should not be used to release the queue in ptp_read(),
and it should be deleted altogether.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Reported-and-tested-by: syzbot+df3f3ef31f60781fa911@syzkaller.appspotmail.com
Fixes: 8f5de6fb2453 ("ptp: support multiple timestamp event readers")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_CD19564FFE8DA8A5918DFE92325D92DD8107@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ptp: ptp_read should not release queue

Firstly, queue is not the memory allocated in ptp_read;
Secondly, other processes may block at ptp_read and wait for conditions to be
met to perform read operations.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Reported-and-tested-by: syzbot+df3f3ef31f60781fa911@syzkaller.appspotmail.com
Fixes: 8f5de6fb2453 ("ptp: support multiple timestamp event readers")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_18747D76F1675A3C633772960237544AAA09@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-06 (ice)

This series contains updates to ice driver only.

Dave removes SR-IOV LAG attribute for only the interface being disabled
to allow for proper unwinding of all interfaces.

Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC
due to non-allowed sleeping.

Aniruddha and Marcin fix redirection and drop rules for switchdev by
properly setting and marking egress/ingress type.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix VF-VF direction matching in drop rule in switchdev
  ice: Fix VF-VF filter rules in switchdev mode
  ice: lag: in RCU, use atomic allocation
  ice: Fix SRIOV LAG disable on non-compliant aggregate
====================

Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP

syzbot was able to trigger the following report while providing
too small TCA_FQ_WEIGHTS attribute [1]

Fix is to use NLA_POLICY_EXACT_LEN() to ensure user space
provided correct sizes.

Apply the same fix to TCA_FQ_PRIOMAP.

[1]
BUG: KMSAN: uninit-value in fq_load_weights net/sched/sch_fq.c:960 [inline]
BUG: KMSAN: uninit-value in fq_change+0x1348/0x2fe0 net/sched/sch_fq.c:1071
fq_load_weights net/sched/sch_fq.c:960 [inline]
fq_change+0x1348/0x2fe0 net/sched/sch_fq.c:1071
fq_init+0x68e/0x780 net/sched/sch_fq.c:1159
qdisc_create+0x12f3/0x1be0 net/sched/sch_api.c:1326
tc_modify_qdisc+0x11ef/0x2c20
rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6558
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6576
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2588
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2642
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2680 [inline]
__se_sys_sendmsg net/socket.c:2678 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2678
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2588
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2642
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2680 [inline]
__se_sys_sendmsg net/socket.c:2678 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2678
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5001 Comm: syz-executor300 Not tainted 6.6.0-syzkaller-12401-g8f6f76a6a29f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023

Fixes: 29f834aa326e ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Fixes: 49e7265fd098 ("net_sched: sch_fq: add TCA_FQ_WEIGHTS attribute")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231107160440.1992526-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-06 (i40e)

This series contains updates to i40e driver only.

Ivan Vecera resolves a couple issues with devlink; removing a call to
devlink_port_type_clear() and ensuring devlink port is unregistered
after the net device.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix devlink port unregistering
i40e: Do not call devlink_port_type_clear()
====================

Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: kcm: fill in MODULE_DESCRIPTION()

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Link: https://lore.kernel.org/r/20231108020305.537293-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-11-08' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Add missing netfilter modules description to fix W=1, from Florian Westphal.

2) Fix catch-all element GC with timeout when use with the pipapo set
   backend, this remained broken since I tried to fix it this summer,
   then another attempt to fix it recently.

3) Add missing IPVS modules descriptions to fix W=1, also from Florian.

4) xt_recent allocated a too small buffer to store an IPv4-mapped IPv6
   address which can be parsed by in6_pton(), from Maciej Zenczykowski.
   Broken for many releases.

5) Skip IPv4-mapped IPv6, IPv4-compat IPv6, site/link local scoped IPv6
   addressses to set up IPv6 NAT redirect, also from Florian. This is
   broken since 2012.

* tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
====================

Link: https://lore.kernel.org/r/20231108155802.84617-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-08

We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).

The main changes are:

1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
   BPF_END where the source register was incorrectly marked as precise,
   from Shung-Hsi Yu.

2) Fix a concurrency issue in bpf_timer where the former could still have
   been alive after an application releases or unpins the map, from Hou Tao.

3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
   before being spilled and therefore losing sign information, from Hao Sun.

4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
   incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.

5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
   migrate all BPF-related __diag callsites over to it, and add a new
   __diag_ignore_all for -Wmissing-declarations to the macros to address
   recent build warnings, from Dave Marchevsky.

6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
   where char is not signed, from Björn Töpel.

7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
   the bpf_map_create_opts, from Andrii Nakryiko.

8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
   been mounted and used by other applications already, from Manu Bretelle.

9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
   iterators, from Matthieu Baerts.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  selftests/bpf: Fix broken build where char is unsigned
  selftests/bpf: precision tracking test for BPF_NEG and BPF_END
  bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
  selftests/bpf: Add test for using css_task iter in sleepable progs
  selftests/bpf: Add tests for css_task iter combining with cgroup iter
  bpf: Relax allowlist for css_task iter
  selftests/bpf: fix test_maps' use of bpf_map_create_opts
  bpf: Check map->usercnt after timer->timer is assigned
  bpf: Add __bpf_hook_{start,end} macros
  bpf: Add __bpf_kfunc_{start,end}_defs macros
  selftests/bpf: fix test_bpffs
  selftests/bpf: Add test for immediate spilled to stack
  bpf: Fix check_stack_write_fixed_off() to correctly spill imm
  bpf: fix compilation error without CGROUPS
====================

Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_ct: Always fill offloading tuple iifidx

Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:

- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().

- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().

Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
"Bugfixes:

   - SUNRPC:
       - re-probe the target RPC port after an ECONNRESET error
       - handle allocation errors from rpcb_call_async()
       - fix a use-after-free condition in rpc_pipefs
       - fix up various checks for timeouts

   - NFSv4.1:
       - Handle NFS4ERR_DELAY errors during session trunking
       - fix SP4_MACH_CRED protection for pnfs IO

   - NFSv4:
       - Ensure that we test all delegations when the server notifies
         us that it may have revoked some of them

  Features:

   - Allow knfsd processes to break out of NFS4ERR_DELAY loops when
     re-exporting NFSv4.x by setting appropriate values for the
     'delay_retrans' module parameter

   - nfs: Convert nfs_symlink() to use a folio"

* tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Convert nfs_symlink() to use a folio
  SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
  NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
  SUNRPC: Add an IS_ERR() check back to where it was
  NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
  nfs41: drop dependency between flexfiles layout driver and NFSv3 modules
  NFSv4: fairly test all delegations on a SEQ4_ revocation
  SUNRPC: SOFTCONN tasks should time out when on the sending list
  SUNRPC: Force close the socket when a hard error is reported
  SUNRPC: Don't skip timeout checks in call_connect_status()
  SUNRPC: ECONNRESET might require a rebind
  NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts
  NFSv4: Add a parameter to limit the number of retries after NFS4ERR_DELAY

Merge tag 'exfat-for-6.7-rc1-part2' of git://git./linux/kernel/git/linkinjeon/exfat

Pull exfat updates from Namjae Jeon:

- Fix an issue that exfat timestamps are not updated caused by new
   timestamp accessor function patch

* tag 'exfat-for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix ctime is not updated
  exfat: fix setting uninitialized time to ctime/atime

Merge tag 'xfs-6.7-merge-2' of git://git./fs/xfs/xfs-linux

Pull xfs updates from Chandan Babu:

- Realtime device subsystem:
    - Cleanup usage of xfs_rtblock_t and xfs_fsblock_t data types
    - Replace open coded conversions between rt blocks and rt extents
      with calls to static inline helpers
    - Replace open coded realtime geometry compuation and macros with
      helper functions
    - CPU usage optimizations for realtime allocator
    - Misc bug fixes associated with Realtime device

- Allow read operations to execute while an FICLONE ioctl is being
   serviced

- Misc bug fixes:
    - Alert user when xfs_droplink() encounters an inode with a link
      count of zero
    - Handle the case where the allocator could return zero extents when
      servicing an fallocate request

* tag 'xfs-6.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
  xfs: allow read IO and FICLONE to run concurrently
  xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space
  xfs: introduce protection for drop nlink
  xfs: don't look for end of extent further than necessary in xfs_rtallocate_extent_near()
  xfs: don't try redundant allocations in xfs_rtallocate_extent_near()
  xfs: limit maxlen based on available space in xfs_rtallocate_extent_near()
  xfs: return maximum free size from xfs_rtany_summary()
  xfs: invert the realtime summary cache
  xfs: simplify rt bitmap/summary block accessor functions
  xfs: simplify xfs_rtbuf_get calling conventions
  xfs: cache last bitmap block in realtime allocator
  xfs: use accessor functions for summary info words
  xfs: consolidate realtime allocation arguments
  xfs: create helpers for rtsummary block/wordcount computations
  xfs: use accessor functions for bitmap words
  xfs: create helpers for rtbitmap block/wordcount computations
  xfs: create a helper to handle logging parts of rt bitmap/summary blocks
  xfs: convert rt summary macros to helpers
  xfs: convert open-coded xfs_rtword_t pointer accesses to helper
  xfs: remove XFS_BLOCKWSIZE and XFS_BLOCKWMASK macros
  ...

MAINTAINERS: update lists.linuxfoundation.org migrated lists

The mailman-2 system behind lists.linux[-]foundation.org is being
retired, so the lists are being migrated to lists.linux.dev.

Since both domains belong to LF and setting up proper forwards is
possible, the old addresses will continue to work for a while, but all
new patches should be sent to the new canonical addresses for each list.

Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 's390-6.7-2' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Vasily Gorbik:

- Get rid of s390 specific use of two PTEs per 4KB page with complex
   half-used pages tracking. Using full 4KB pages for 2KB PTEs increases
   the memory footprint of page tables but drastically simplify mm code,
   removing a common blocker for common code changes and adaptations

- Simplify and rework "cmma no-dat" handling. This is a follow up for
   recent fixes which prevent potential incorrect guest TLB flushes

- Add perf user stack unwinding as well as USER_STACKTRACE support for
   user space built with -mbackchain compile option

- Add few missing conversion from tlb_remove_table to tlb_remove_ptdesc

- Fix crypto cards vanishing in a secure execution environment due to
   asynchronous errors

- Avoid reporting crypto cards or queues in check-stop state as online

- Fix null-ptr deference in AP bus code triggered by early config
   change via SCLP

- Couple of stability improvements in AP queue interrupt handling

* tag 's390-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: make pte_free_tlb() similar to pXd_free_tlb()
  s390/mm: use compound page order to distinguish page tables
  s390/mm: use full 4KB page for 2KB PTE
  s390/cmma: rework no-dat handling
  s390/cmma: move arch_set_page_dat() to header file
  s390/cmma: move set_page_stable() and friends to header file
  s390/cmma: move parsing of cmma kernel parameter to early boot code
  s390/cmma: cleanup inline assemblies
  s390/ap: fix vanishing crypto cards in SE environment
  s390/zcrypt: don't report online if card or queue is in check-stop state
  s390: add USER_STACKTRACE support
  s390/perf: implement perf_callchain_user()
  s390/ap: fix AP bus crash on early config change callback invocation
  s390/ap: re-enable interrupt for AP queues
  s390/ap: rework to use irq info from ap queue status
  s390/mm: add missing conversion to use ptdescs

Merge tag 'rcu-fixes-v6.7' of git://git./linux/kernel/git/frederic/linux-dynticks

Pull RCU fixes from Frederic Weisbecker:

- Fix a lock inversion between scheduler and RCU introduced in
   v6.2-rc4. The scenario could trigger on any user of RCU_NOCB
   (mostly Android but also nohz_full)

- Fix PF_IDLE semantic changes introduced in v6.6-rc3 breaking
   some RCU-Tasks and RCU-Tasks-Trace expectations as to what
   exactly is an idle task. This resulted in potential spurious
   stalls and warnings.

* tag 'rcu-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
  rcu/tasks-trace: Handle new PF_IDLE semantics
  rcu/tasks: Handle new PF_IDLE semantics
  rcu: Introduce rcu_cpu_online()
  rcu: Break rcu_node_0 --> &rq->__lock order

Merge tag 'memblock-v6.7-rc1' of git://git./linux/kernel/git/rppt/memblock

Pull memblock update from Mike Rapoport:
"Report failures when memblock_can_resize is not set.

  Numerous memblock reservations at early boot may exhaust static
  memblock.reserved array and it is unnoticed because most of the
  callers don't check memblock_reserve() return value.

  In this case the system will crash later, but the reason is hard to
  identify.

  Replace return of an error with panic() when memblock.reserved is
  exhausted before it can be resized"

* tag 'memblock-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: report failures when memblock_can_resize is not set

Merge tag 'kgdb-6.7-rc1' of git://git./linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
"Just two patches for you this time!

   - During a panic, flush the console before entering kgdb.

     This makes things a little easier to comprehend, especially if an
     NMI backtrace was triggered on all CPUs just before we enter the
     panic routines

   - Correcting a couple of misleading (a.k.a. plain wrong) comments"

* tag 'kgdb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Corrects comment for kdballocenv
  kgdb: Flush console before entering kgdb on panic

Merge tag 'riscv-for-linus-6.7-rc1' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

- Support for cbo.zero in userspace

- Support for CBOs on ACPI-based systems

- A handful of improvements for the T-Head cache flushing ops

- Support for software shadow call stacks

- Various cleanups and fixes

* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
  RISC-V: hwprobe: Fix vDSO SIGSEGV
  riscv: configs: defconfig: Enable configs required for RZ/Five SoC
  riscv: errata: prefix T-Head mnemonics with th.
  riscv: put interrupt entries into .irqentry.text
  riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
  riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
  riscv/mm: Fix the comment for swap pte format
  RISC-V: clarify the QEMU workaround in ISA parser
  riscv: correct pt_level name via pgtable_l5/4_enabled
  RISC-V: Provide pgtable_l5_enabled on rv32
  clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
  clocksource: timer-riscv: Don't enable/disable timer interrupt
  lkdtm: Fix CFI_BACKWARD on RISC-V
  riscv: Use separate IRQ shadow call stacks
  riscv: Implement Shadow Call Stack
  riscv: Move global pointer loading to a macro
  riscv: Deduplicate IRQ stack switching
  riscv: VMAP_STACK overflow detection thread-safe
  RISC-V: cacheflush: Initialize CBO variables on ACPI systems
  RISC-V: ACPI: RHCT: Add function to get CBO block sizes
  ...

netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses

The ipv6 redirect target was derived from the ipv4 one, i.e. its
identical to a 'dnat' with the first (primary) address assigned to the
network interface.  The code has been moved around to make it usable
from nf_tables too, but its still the same as it was back when this
was added in 2012.

IPv6, however, has different types of addresses, if the 'wrong' address
comes first the redirection does not work.

In Daniels case, the addresses are:
  inet6 ::ffff:192 ...
  inet6 2a01: ...

... so the function attempts to redirect to the mapped address.

Add more checks before the address is deemed correct:
1. If the packets' daddr is scoped, search for a scoped address too
2. skip tentative addresses
3. skip mapped addresses

Use the first address that appears to match our needs.

Reported-by: Daniel Huhardeaux <tech@tootai.net>
Closes: https://lore.kernel.org/netfilter/71be06b8-6aa0-4cf9-9e0b-e2839b01b22f@tootai.net/
Fixes: 115e23ac78f8 ("netfilter: ip6tables: add REDIRECT target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge patch series "riscv: Fix set_memory_XX() and set_direct_map_XX()"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

Those 2 patches fix the set_memory_XX() and set_direct_map_XX() APIs, which
in turn fix STRICT_KERNEL_RWX and memfd_secret(). Those were broken since the
permission changes were not applied to the linear mapping because the linear
mapping is mapped using hugepages and walk_page_range_novma() does not split
such mappings.

To fix that, patch 1 disables PGD mappings in the linear mapping as it is
hard to propagate changes at this level in *all* the page tables, this has the
downside of disabling PMD mapping for sv32 and PUD (1GB) mapping for sv39 in
the linear mapping (for specific kernels, we could add a Kconfig to enable
ARCH_HAS_SET_DIRECT_MAP and STRICT_KERNEL_RWX if needed, I'm pretty sure we'll
discuss that).

patch 2 implements the split of the huge linear mappings so that
walk_page_range_novma() can properly apply the permissions. The whole split is
protected with mmap_sem in write mode, but I'm wondering if that's enough,
any opinion on that is appreciated.

* b4-shazam-merge:
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping

Link: https://lore.kernel.org/r/20231108075930.7157-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings

When STRICT_KERNEL_RWX is set, any change of permissions on any kernel
mapping (vmalloc/modules/kernel text...etc) should be applied on its
linear mapping alias. The problem is that the riscv kernel uses huge
mappings for the linear mapping and walk_page_range_novma() does not
split those huge mappings.

So this patchset implements such split in order to apply fine-grained
permissions on the linear mapping.

Below is the difference before and after (the first PUD mapping is split
into PTE/PMD mappings):

Before:

---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000    0x0000000080080000      1536K PTE     D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000    0x0000000080200000      1914M PMD     D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000    0x00000000f7c00000        12M PMD     D A G . . . R V
0xffffaf8078800000-0xffffaf8078c00000    0x00000000f8800000         4M PMD     D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000    0x00000000f8c00000         6M PMD     D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000    0x00000000f9200000        84M PMD     D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000    0x00000000fe600000      1112K PTE     D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000    0x00000000fe717000        12K PTE     D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000    0x00000000fe71d000         4K PTE     D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000    0x00000000fe722000       888K PTE     D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000    0x00000000fe800000        22M PMD     D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000    0x00000000ffe00000      1360K PTE     D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000    0x00000000fff55000       684K PTE     D A G . . W R V
0xffffaf8080000000-0xffffaf8400000000    0x0000000100000000        14G PUD     D A G . . W R V

After:

---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000    0x0000000080080000      1536K PTE     D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000    0x0000000080200000      1914M PMD     D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000    0x00000000f7c00000        12M PMD     D A G . . . R V
0xffffaf8078800000-0xffffaf8078a00000    0x00000000f8800000         2M PMD     D A G . . W R V
0xffffaf8078a00000-0xffffaf8078c00000    0x00000000f8a00000         2M PTE     D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000    0x00000000f8c00000         6M PMD     D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000    0x00000000f9200000        84M PMD     D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000    0x00000000fe600000      1112K PTE     D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000    0x00000000fe717000        12K PTE     D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000    0x00000000fe71d000         4K PTE     D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000    0x00000000fe722000       888K PTE     D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000    0x00000000fe800000        22M PMD     D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000    0x00000000ffe00000      1360K PTE     D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000    0x00000000fff55000       684K PTE     D A G . . W R V
0xffffaf8080000000-0xffffaf8080800000    0x0000000100000000         8M PMD     D A G . . W R V
0xffffaf8080800000-0xffffaf8080af6000    0x0000000100800000      3032K PTE     D A G . . W R V
0xffffaf8080af6000-0xffffaf8080af8000    0x0000000100af6000         8K PTE     D A G . X . R V
0xffffaf8080af8000-0xffffaf8080c00000    0x0000000100af8000      1056K PTE     D A G . . W R V
0xffffaf8080c00000-0xffffaf8081a00000    0x0000000100c00000        14M PMD     D A G . . W R V
0xffffaf8081a00000-0xffffaf8081a40000    0x0000000101a00000       256K PTE     D A G . . W R V
0xffffaf8081a40000-0xffffaf8081a44000    0x0000000101a40000        16K PTE     D A G . X . R V
0xffffaf8081a44000-0xffffaf8081a52000    0x0000000101a44000        56K PTE     D A G . . W R V
0xffffaf8081a52000-0xffffaf8081a54000    0x0000000101a52000         8K PTE     D A G . X . R V
...
0xffffaf809e800000-0xffffaf80c0000000    0x000000011e800000       536M PMD     D A G . . W R V
0xffffaf80c0000000-0xffffaf8400000000    0x0000000140000000        13G PUD     D A G . . W R V

Note that this also fixes memfd_secret() syscall which uses
set_direct_map_invalid_noflush() and set_direct_map_default_noflush() to
remove the pages from the linear mapping. Below is the kernel page table
while a memfd_secret() syscall is running, you can see all the !valid
page table entries in the linear mapping:

...
0xffffaf8082240000-0xffffaf8082241000    0x0000000102240000         4K PTE     D A G . . W R .
0xffffaf8082241000-0xffffaf8082250000    0x0000000102241000        60K PTE     D A G . . W R V
0xffffaf8082250000-0xffffaf8082252000    0x0000000102250000         8K PTE     D A G . . W R .
0xffffaf8082252000-0xffffaf8082256000    0x0000000102252000        16K PTE     D A G . . W R V
0xffffaf8082256000-0xffffaf8082257000    0x0000000102256000         4K PTE     D A G . . W R .
0xffffaf8082257000-0xffffaf8082258000    0x0000000102257000         4K PTE     D A G . . W R V
0xffffaf8082258000-0xffffaf8082259000    0x0000000102258000         4K PTE     D A G . . W R .
0xffffaf8082259000-0xffffaf808225a000    0x0000000102259000         4K PTE     D A G . . W R V
0xffffaf808225a000-0xffffaf808225c000    0x000000010225a000         8K PTE     D A G . . W R .
0xffffaf808225c000-0xffffaf8082266000    0x000000010225c000        40K PTE     D A G . . W R V
0xffffaf8082266000-0xffffaf8082268000    0x0000000102266000         8K PTE     D A G . . W R .
0xffffaf8082268000-0xffffaf8082284000    0x0000000102268000       112K PTE     D A G . . W R V
0xffffaf8082284000-0xffffaf8082288000    0x0000000102284000        16K PTE     D A G . . W R .
0xffffaf8082288000-0xffffaf808229c000    0x0000000102288000        80K PTE     D A G . . W R V
0xffffaf808229c000-0xffffaf80822a0000    0x000000010229c000        16K PTE     D A G . . W R .
0xffffaf80822a0000-0xffffaf80822a5000    0x00000001022a0000        20K PTE     D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000    0x00000001022a5000         4K PTE     D A G . . . R V
0xffffaf80822a6000-0xffffaf80822ab000    0x00000001022a6000        20K PTE     D A G . . W R V
...

And when the memfd_secret() fd is released, the linear mapping is
correctly reset:

...
0xffffaf8082240000-0xffffaf80822a5000    0x0000000102240000       404K PTE     D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000    0x00000001022a5000         4K PTE     D A G . . . R V
0xffffaf80822a6000-0xffffaf80822af000    0x00000001022a6000        36K PTE     D A G . . W R V
...

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Don't use PGD entries for the linear mapping

Propagating changes at this level is cumbersome as we need to go through
all the page tables when that happens (either when changing the
permissions or when splitting the mapping).

Note that this prevents the use of 4MB mapping for sv32 and 1GB mapping for
sv39 in the linear mapping.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

netfilter: xt_recent: fix (increase) ipv6 literal buffer length

in6_pton() supports 'low-32-bit dot-decimal representation'
(this is useful with DNS64/NAT64 networks for example):

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:1.2.3.4 > /proc/self/net/xt_recent/DEFAULT
  # cat /proc/self/net/xt_recent/DEFAULT
  src=aaaa:bbbb:cccc:dddd:eeee:ffff:0102:0304 ttl: 0 last_seen: 9733848829 oldest_pkt: 1 9733848829

but the provided buffer is too short:

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:255.255.255.255 > /proc/self/net/xt_recent/DEFAULT
  -bash: echo: write error: Invalid argument

Fixes: 079aa88fe717 ("netfilter: xt_recent: IPv6 support")
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ipvs: add missing module descriptions

W=1 builds warn on missing MODULE_DESCRIPTION, add them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: remove catchall element in GC sync path

The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.

Fixes: 4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: add missing module descriptions

W=1 builds warn on missing MODULE_DESCRIPTION, add them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

drivers/net/ppp: use standard array-copy-function

In ppp_generic.c, memdup_user() is utilized to copy a userspace array.
This is done without an overflow-check, which is, however, not critical
because the multiplicands are an unsigned short and struct sock_filter,
which is currently of size 8.

Regardless, string.h now provides memdup_array_user(), a wrapper for
copying userspace arrays in a standardized manner, which has the
advantage of making it more obvious to the reader that an array is being
copied.
The wrapper additionally performs an obligatory overflow check, saving
the reader the effort of analyzing the potential for overflow, and
making the code a bit more robust in case of future changes to the
multiplicands len * size.

Replace memdup_user() with memdup_array_user().

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

i2c: cp2615: Fix 'assignment to __be16' warning

While the preamble field _is_ technically big-endian, its value is always 0x2A2A,
which is the same in either endianness. However, to avoid generating a warning,
we should still call `htons()` explicitly.

Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: dev: copy userspace array safely

i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done
without an overflow check.

Use the new wrapper memdup_array_user() to copy the array more safely.

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: designware: Disable TX_EMPTY irq while waiting for block length byte

During SMBus block data read process, we have seen high interrupt rate
because of TX_EMPTY irq status while waiting for block length byte (the
first data byte after the address phase). The interrupt handler does not
do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
first data byte from I2C device, then re-enable it to resume SMBus
transaction.

It takes 0.789 ms for host to receive data length from slave.
Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
And it is none after applying the patch.

Cc: stable@vger.kernel.org
Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: iproc: handle invalid slave state

Add the code to handle an invalid state when both bits S_RX_EVENT
(indicating a transaction) and S_START_BUSY (indicating the end
of transaction - transition of START_BUSY from 1 to 0) are set in
the interrupt status register during a slave read.

Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Fixes: 1ca1b4516088 ("i2c: iproc: handle Master aborted error")
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN

NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an
error printf-formatted string having 96 characters including the
terminating \0. Assuming each %d (representing a queue) gets replaced by
a number having at most 2 digits (a reasonable assumption), the final
string is also 96 characters wide, which is too much.

Reduce the verbiage a bit by removing some (partially) redundant words,
which makes the new printf-formatted string be 73 characters wide with
the trailing newline.

Fixes: 800db2d125c2 ("net: enetc: ensure we always have a minimum number of TXQs for stack")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================

The following simple reproducer can cause the issue described above:

int main(void)
{
  int sock;
  struct sockaddr_vm addr = {
    .svm_family = AF_VSOCK,
    .svm_cid = VMADDR_CID_ANY,
    .svm_port = 1234,
  };

  sock = socket(AF_VSOCK, SOCK_STREAM, 0);
  connect(sock, (struct sockaddr *)&addr, sizeof(addr));
  return 0;
}

This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation.

Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Reported-and-tested-by: syzbot+0c8ce1da0ac31abbadcd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcd
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231104150531.257952-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: respect userspace disabling IFF_MULTICAST

So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.

Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'pm-6.7-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"These add new hardware support to a cpufreq driver and fix cpupower
  utility documentation:

   - Add support for several Qualcomm SoC versions to the Qualcomm
     cpufreq driver (Robert Marko, Varadarajan Narayanan)

   - Fix a reference to a removed document in the cpupower utility
     documentation (Vegard Nossum)"

* tag 'pm-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
  cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
  cpufreq: qcom-nvmem: add support for IPQ8074
  cpupower: fix reference to nonexistent document

Merge tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm

Pull more drm updates from Dave Airlie:
"Geert pointed out I missed the renesas reworks in my main pull, so
  this pull contains the renesas next work for atomic conversion and DT
  support.

  It also contains a bunch of amdgpu and some small ssd13xx fixes.

  renesas:
   - atomic conversion
   - DT support

  ssd13xx:
   - dt binding fix for ssd132x
   - Initialize ssd130x crtc_state to NULL.

  amdgpu:
   - Fix RAS support check
   - RAS fixes
   - MES fixes
   - SMU13 fixes
   - Contiguous memory allocation fix
   - BACO fixes
   - GPU reset fixes
   - Min power limit fixes
   - GFX11 fixes
   - USB4/TB hotplug fixes
   - ARM regression fix
   - GFX9.4.3 fixes
   - KASAN/KCSAN stack size check fixes
   - SR-IOV fixes
   - SMU14 fixes
   - PSP13 fixes
   - Display blend fixes
   - Flexible array size fixes

  amdkfd:
   - GPUVM fix

  radeon:
   - Flexible array size fixes"

* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
  drm/amd/display: Enable fast update on blendTF change
  drm/amd/display: Fix blend LUT programming
  drm/amd/display: Program plane color setting correctly
  drm/amdgpu: Query and report boot status
  drm/amdgpu: Add psp v13 function to query boot status
  drm/amd/swsmu: remove fw version check in sw_init.
  drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
  drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
  drm/amdgpu: Optimize the asic type fix code
  drm/amdgpu: fix GRBM read timeout when do mes_self_test
  drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
  drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
  drm/amdgpu: Attach eviction fence on alloc
  drm/amdkfd: Improve amdgpu_vm_handle_moved
  drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
  drm/amd/display: Avoid NULL dereference of timing generator
  drm/amdkfd: Update cache info for GFX 9.4.3
  drm/amdkfd: Populate cache info for GFX 9.4.3
  drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
  drm/amdgpu/smu13: drop compute workload workaround
  ...

Merge tag 'regmap-fix-v6.7-merge-window' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"One fix here, for an interaction between noinc registers and caches.

  If a device uses noinc registers (which is rare) then we could corrupt
  registers after the noinc register in the cache"

* tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent noinc writes from clobbering cache

Merge tag 'rproc-v6.7' of git://git./linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:
"Support for controlling the second core in Mediatek's SCP dual-core
  setup is introduced.

  Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
  audio DSP in SC7180 are introduced. The peripheral NoC clock is
  dropped from MSM8996 modem DSP, as this is handled through the
  interconnect provider.

  In the zynqmp driver the setup for TCM memory, and device address
  translation thereof, when operating in lockstep mode is corrected.

  A few bug fixes and cleanups are introduces across the ST and STM32
  remoteproc drivers"

* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
  remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
  remoteproc: st: Use device_get_match_data()
  remoteproc: zynqmp: Change tcm address translation method
  remoteproc: mediatek: Refactor single core check and fix retrocompatibility
  remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
  dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
  remoteproc: qcom: pas: Add SM6375 MPSS
  remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
  dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
  dt-bindings: remoteproc: pru: Add Interrupt property
  remoteproc: qcom: pas: Add sc7180 adsp
  dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
  remoteproc: zynqmp: fix TCM carveouts in lockstep mode
  remoteproc: mediatek: Refine ipi handler error message
  remoteproc: mediatek: Report watchdog crash to all cores
  remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
  remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
  remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
  ...

Merge tag 'rpmsg-v6.7' of git://git./linux/kernel/git/remoteproc/linux

Pull rpmsg updates from Bjorn Andersson:
"This replaces a number of strncpy() instances with strscpy() or
  strscpy_pad() through the rpmsg core and virtio implementation"

* tag 'rpmsg-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: virtio: Replace deprecated strncpy with strscpy/_pad
  rpmsg: Replace deprecated strncpy with strscpy_pad
  rpmsg: core: Replace deprecated strncpy with strscpy

Merge tag 'pcmcia-6.7-rc1' of git://git./linux/kernel/git/brodo/linux

Pull PCMCIA updates from Dominik Brodowski:
"Cleanups and fixes.

  Yang Yingliang has fixed a number of resource leaks and Dongliang Mu
  contributed a spelling fix for the PCMCIA core. Also included is a
  tiny clenaup to the tcic PCMCIA socket driver provided by lizhe"

* tag 'pcmcia-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: tcic: remove unneeded "&" in call to setup_timer()
  pcmcia: typo fix
  pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
  pcmcia: ds: fix refcount leak in pcmcia_device_add()
  pcmcia: cs: fix possible hung task and memory leak pccardd()

Merge tag 'gpio-pinctrl-updates-for-v6.7-rc1' of git://git./linux/kernel/git/brgl/linux

Pull gpio/pinctrl updates from Bartosz Golaszewski:
"The bulk of it is a rework of the glue layer between pinctrl and GPIO.
  We changed the signature of GPIO helpers for pinctrl to taking the
  gpio_chip/offset pair as arguments instead of using the deprecated
  global GPIO numberspace.

  The last little bit is removing the gpiochip_find() function as it now
  has no more users in-tree.

  Summary:

   - rework the GPIO-to-pinctrl glue code to stop using the deprecated
     global GPIO numberspace

   - remove now unused wrappers around pinctrl GPIO helpers from drivers

   - remove gpiochip_find() as it has no more users"

* tag 'gpio-pinctrl-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (70 commits)
  pinctrl: tegra: drop the wrapper around pinctrl_gpio_request()
  pinctrl: em: drop the wrapper around pinctrl_gpio_request()
  pinctrl: nuvoton: npcm8xx: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: nuvoton: npcm7xx: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: stm32: drop wrappers around pinctrl_gpio_free/input()
  pinctrl: starfive: jh7110: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: starfive: jh7100: drop wrappers around pinctrl_gpio_request/free()
  pinctrl: ocelot: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: cirrus: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: mediatek: common: drop the wrappers around pinctrl_gpio_direction_input()
  pinctrl: mediatek: moore: drop the wrappers around pinctrl_gpio_direction_input()
  pinctrl: rk805: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: axp209: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: vt8500: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: as3722: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: ingenic: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: st: drop the wrapper around pinctrl_gpio_direction_input()
  pinctrl: change the signature of pinctrl_ready_for_gpio_range()
  pinctrl: change the signature of gpio_to_pin()
  pinctrl: change the signature of pinctrl_match_gpio_range()
  ...

Merge branch 'Let BPF verifier consider {task,cgroup} is trusted in bpf_iter_reg'

Chuyi Zhou says:

====================
The patchset aims to let the BPF verivier consider
bpf_iter__cgroup->cgroup and bpf_iter__task->task is trusted suggested by
Alexei[1].

Please see individual patches for more details. And comments are always
welcome.

Link[1]:https://lore.kernel.org/bpf/20231022154527.229117-1-zhouchuyi@bytedance.com/T/#mb57725edc8ccdd50a1b165765c7619b4d65ed1b0

v2->v1:
* Patch #1: Add Yonghong's ack and add description of similar case in
log.
* Patch #2: Add Yonghong's ack
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly

Commit f49843afde (selftests/bpf: Add tests for css_task iter combining
with cgroup iter) added a test which demonstrates how css_task iter can be
combined with cgroup iter. That test used bpf_cgroup_from_id() to convert
bpf_iter__cgroup->cgroup to a trusted ptr which is pointless now, since
with the previous fix, we can get a trusted cgroup directly from
bpf_iter__cgroup.

Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-3-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg

BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.

The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.

Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.

This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.

Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().

This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.

Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/

Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

RISC-V: Probe misaligned access speed in parallel

Probing for misaligned access speed takes about 0.06 seconds. On a
system with 64 cores, doing this in smp_callin() means it's done
serially, extending boot time by 3.8 seconds. That's a lot of boot time.

Instead of measuring each CPU serially, let's do the measurements on
all CPUs in parallel. If we disable preemption on all CPUs, the
jiffies stop ticking, so we can do this in stages of 1) everybody
except core 0, then 2) core 0. The allocations are all done outside of
on_each_cpu() to avoid calling alloc_pages() with interrupts disabled.

For hotplugged CPUs that come in after the boot time measurement,
register CPU hotplug callbacks, and do the measurement there. Interrupts
are enabled in those callbacks, so they're fine to do alloc_pages() in.

Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Remove __init on unaligned_emulation_finish()

This function shouldn't be __init, since it's called during hotplug. The
warning says it well enough:

WARNING: modpost: vmlinux: section mismatch in reference:
check_unaligned_access_all_cpus+0x13a (section: .text) ->
unaligned_emulation_finish (section: .init.text)

Signed-off-by: Evan Green <evan@rivosinc.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Link: https://lore.kernel.org/r/20231106231105.3141413-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Show accurate per-hart isa in /proc/cpuinfo

In /proc/cpuinfo, most of the information we show for each processor is
specific to that hart: marchid, mvendorid, mimpid, processor, hart,
compatible, and the mmu size. But the ISA string gets filtered through a
lowest common denominator mask, so that if one CPU is missing an ISA
extension, no CPUs will show it.

Now that we track the ISA extensions for each hart, let's report ISA
extension info accurately per-hart in /proc/cpuinfo. We cannot change
the "isa:" line, as usermode may be relying on that line to show only
the common set of extensions supported across all harts. Add a new "hart
isa" line instead, which reports the true set of extensions for that
hart.

Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231106232439.3176268-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: Don't rely on positional structure initialization

Without this I get a bunch of warnings along the lines of

arch/riscv/kernel/module.c:535:26: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
535 | [R_RISCV_32] = { apply_r_riscv_32_rela },

This just mades the member initializers explicit instead of positional.
I also aligned some of the table, but mostly just to make the batch
editing go faster.

Fixes: b51fc88cb35e ("Merge patch series "riscv: Add remaining module relocations and tests"")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231107155529.8368-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge patch series "riscv: Add remaining module relocations and tests"

Charlie Jenkins <charlie@rivosinc.com> says:

A handful of module relocations were missing, this patch includes the
remaining ones. I also wrote some test cases to ensure that module
loading works properly. Some relocations cannot be supported in the
kernel, these include the ones that rely on thread local storage and
dynamic linking.

This patch also overhauls the implementation of ADD/SUB/SET/ULEB128
relocations to handle overflow. "Overflow" is different for ULEB128
since it is a variable-length encoding that the compiler can be expected
to generate enough space for. Instead of overflowing, ULEB128 will
expand into the next 8-bit segment of the location.

A psABI proposal [1] was merged that mandates that SET_ULEB128 and
SUB_ULEB128 are paired, however the discussion following the merging of
the pull request revealed that while the pull request was valid, it
would be better for linkers to properly handle this overflow. This patch
proactively implements this methodology for future compatibility.

This can be tested by enabling KUNIT, RUNTIME_KERNEL_TESTING_MENU, and
RISCV_MODULE_LINKING_KUNIT.

[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/403

* b4-shazam-merge:
  riscv: Add tests for riscv module loading
  riscv: Add remaining module relocations
  riscv: Avoid unaligned access when relocating modules

Link: https://lore.kernel.org/r/20231101-module_relocations-v9-0-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add tests for riscv module loading

Add test cases for the two main groups of relocations added: SUB and
SET, along with uleb128.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-3-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Add remaining module relocations

Add all final module relocations and add error logs explaining the ones
that are not supported. Implement overflow checks for
ADD/SUB/SET/ULEB128 relocations.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-2-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Avoid unaligned access when relocating modules

With the C-extension regular 32bit instructions are not
necessarily aligned on 4-byte boundaries. RISC-V instructions
are in fact an ordered list of 16bit little-endian
"parcels", so access the instruction as such.

This should also make the code work in case someone builds
a big-endian RISC-V machine.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231101-module_relocations-v9-1-8dfa3483c400@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

net: phylink: initialize carrier state at creation

Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.

After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.

It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.

Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'vsock-fixes'

Filippo Storniolo says:

====================
vsock: fix server prevents clients from reconnecting

This patch series introduce fix and tests for the following vsock bug:
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed.

More details on the first patch changelog.
The remaining patches are refactoring and test.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock: add dobule bind connect test

This add bind connect test which creates a listening server socket
and tries to connect a client with a bound local port to it twice.

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock: refactor vsock_accept

This is a preliminary patch to introduce SOCK_STREAM bind connect test.
vsock_accept() is split into vsock_listen() and vsock_accept().

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

test/vsock fix: add missing check on socket creation

Add check on socket() return value in vsock_listen()
and vsock_connect()

Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/virtio: remove socket from connected/bound list on shutdown

If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.

This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.

However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.

To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Fix -Wc23-extensions in tcp_options_write()

Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:

  net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
    663 |         }
        |         ^
  1 error generated.

On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:

  net/ipv4/tcp_output.c:663:2: error: expected statement
          }
          ^
  1 error generated.

While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Fix the TX ring stall

The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.

The specific sequence of steps is:

1. tg3_start_xmit() is called at least once and queues packet(s) without
   updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
   called.
3. tg3_tso_bug() determines that the SKB is too large, ...

        if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {

   ... stops the queue, and returns NETDEV_TX_BUSY:

        netif_tx_stop_queue(txq);
        ...
        if (tg3_tx_avail(tnapi) <= frag_cnt_est)
                return NETDEV_TX_BUSY;

4. Since all tg3_tso_bug() call sites directly return, the code updating
   tnapi->prodmbox is skipped.

5. The queue is stuck now. tg3_start_xmit() is not called while the queue
   is stopped. The NIC is not processing new packets because
   tnapi->prodmbox wasn't updated. tg3_tx() is not called by
   tg3_poll_work() because the all TX descriptions that could be freed has
   been freed:

        /* run TX completion thread */
        if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
                tg3_tx(tnapi);

6. Eventually, dev_watchdog() fires triggering a reset of the queue.

This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.

Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: Fix typo 'weed' in comment

Replace 'weed' with 'we' in the comment.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'vfs-6.7.fsid' of git://git./linux/kernel/git/vfs/vfs

Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
  replacement for inotify. While inotify is availabe on all filesystems,
  fanotify currently isn't.

  In order to support fanotify on all filesystems two things are needed:

   (1) all filesystems need to support AT_HANDLE_FID

   (2) all filesystems need to report a non-zero f_fsid

  This contains (1) and allows filesystems to encode non-decodable file
  handlers for fanotify without implementing any exportfs operations by
  encoding a file id of type FILEID_INO64_GEN from i_ino and
  i_generation.

  Filesystems that want to opt out of encoding non-decodable file ids
  for fanotify that don't support NFS export can do so by providing an
  empty export_operations struct.

  This also partially addresses (2) by generating f_fsid for simple
  filesystems as well as freevxfs. Remaining filesystems will be dealt
  with by separate patches.

  Finally, this contains the patch from the current exportfs maintainers
  which moves exportfs under vfs with Chuck, Jeff, and Amir as
  maintainers and vfs.git as tree"

* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  MAINTAINERS: create an entry for exportfs
  fs: fix build error with CONFIG_EXPORTFS=m or not defined
  freevxfs: derive f_fsid from bdev->bd_dev
  fs: report f_fsid from s_dev for "simple" filesystems
  exportfs: support encoding non-decodeable file handles by default
  exportfs: define FILEID_INO64_GEN* file handle types
  exportfs: make ->encode_fh() a mandatory method for NFS export
  exportfs: add helpers to check if filesystem can encode/decode file handles

Merge tag 'vfs-6.7.iomap' of git://git./linux/kernel/git/vfs/vfs

Pull iomap maintainership rotation from Christian Brauner:
"As discussed on list last week this makes fs/iomap part of vfs.git
  with Darrick as main reviewer"

* tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  iomap: rename iomap entry
  iomap: rotate maintainers

Merge tag 'gfs2-v6.6-rc2-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Andreas Gruenbacher:

- Don't update inode timestamps for direct writes (performance
   regression fix)

- Skip no-op quota records instead of panicing

- Fix a RCU race in gfs2_permission()

- Various other smaller fixes and cleanups all over the place

* tag 'gfs2-v6.6-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (24 commits)
  gfs2: don't withdraw if init_threads() got interrupted
  gfs2: remove dead code in add_to_queue
  gfs2: Fix slab-use-after-free in gfs2_qd_dealloc
  gfs2: Silence "suspicious RCU usage in gfs2_permission" warning
  gfs2: fs: derive f_fsid from s_uuid
  gfs2: No longer use 'extern' in function declarations
  gfs2: Rename gfs2_lookup_{ simple => meta }
  gfs2: Convert gfs2_internal_read to folios
  gfs2: Convert stuffed_readpage to folios
  gfs2: Minor gfs2_write_jdata_batch PAGE_SIZE cleanup
  gfs2: Get rid of gfs2_alloc_blocks generation parameter
  gfs2: Add metapath_dibh helper
  gfs2: Clean up quota.c:print_message
  gfs2: Clean up gfs2_alloc_parms initializers
  gfs2: Two quota=account mode fixes
  gfs2: Stop using GFS2_BASIC_BLOCK and GFS2_BASIC_BLOCK_SHIFT
  gfs2: setattr_chown: Add missing initialization
  gfs2: fix an oops in gfs2_permission
  gfs2: ignore negated quota changes
  gfs2: Don't update inode timestamps for direct writes
  ...

Merge tag 'ovl-update-6.7' of git://git./linux/kernel/git/overlayfs/vfs

Pull overlayfs updates from Amir Goldstein:

- Overlayfs aio cleanups and fixes

   Cleanups and minor fixes in preparation for factoring out of
   read/write passthrough code.

- Overlayfs lock ordering changes

   Hold mnt_writers only throughout copy up instead of a long lived
   elevated refcount.

- Add support for nesting overlayfs private xattrs

   There are cases where you want to use an overlayfs mount as a
   lowerdir for another overlayfs mount. For example, if the system
   rootfs is on overlayfs due to composefs, or to make it volatile (via
   tmpfs), then you cannot currently store a lowerdir on the rootfs,
   because the inner overlayfs will eat all the whiteouts and overlay
   xattrs. This means you can't e.g. store on the rootfs a prepared
   container image for use with overlayfs.

   This adds support for nesting of overlayfs mounts by escaping the
   problematic features and unescaping them when exposing to the
   overlayfs user.

- Add new mount options for appending lowerdirs

* tag 'ovl-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: add support for appending lowerdirs one by one
  ovl: refactor layer parsing helpers
  ovl: store and show the user provided lowerdir mount option
  ovl: remove unused code in lowerdir param parsing
  ovl: Add documentation on nesting of overlayfs mounts
  ovl: Add an alternative type of whiteout
  ovl: Support escaped overlay.* xattrs
  ovl: Add OVL_XATTR_TRUSTED/USER_PREFIX_LEN macros
  ovl: Move xattr support to new xattrs.c file
  ovl: do not encode lower fh with upper sb_writers held
  ovl: do not open/llseek lower file with upper sb_writers held
  ovl: reorder ovl_want_write() after ovl_inode_lock()
  ovl: split ovl_want_write() into two helpers
  ovl: add helper ovl_file_modified()
  ovl: protect copying of realinode attributes to ovl inode
  ovl: punt write aio completion to workqueue
  ovl: propagate IOCB_APPEND flag on writes to realfile
  ovl: use simpler function to convert iocb to rw flags

Merge branch 'pm-tools'

Merge cpupower utility update for 6.7-rc1:

- Fix a reference to a removed document in the cpupower utility
documentation (Vegard Nossum).

* pm-tools:
cpupower: fix reference to nonexistent document

Merge branch 'pm-cpufreq'

Merge branch 'pm-cpufreq'

Merge additional Qualcomm cpufreq driver updates for 6.7-rc1:

- Add support for several Qualcomm SoC versions (Robert Marko,
   Varadarajan Narayanan).

* pm-cpufreq:
  cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
  cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx
  cpufreq: qcom-nvmem: add support for IPQ8074

Merge tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
"Here's the second big bcachefs pull request. This brings your tree up
  to date with my master branch, which is what existing bcachefs users
  are currently running.

  New features:
   - rebalance_work btree (and metadata version 1.3): the rebalance
     thread no longer has to scan to find extents that need processing -
     big scalability improvement.
   - sb_errors superblock section: this adds counters for each fsck
     error type, since filesystem creation, along with the date of the
     most recent error. It'll get us better bug reports (since users do
     not typically report errors that fsck was able to fix), and I might
     add telemetry for this in the future.

  Fixes include:
   - multiple snapshot deletion fixes
   - members_v2 fixups
   - deleted_inodes btree fixes
   - copygc thread no longer spins when a device is full but has no
     fragmented buckets (i.e. rebalance needs to move data around
     instead)
   - a fix for a memory reclaim issue with the btree key cache: we're
     now careful not to hold the srcu read lock that blocks key cache
     reclaim for too long
   - an early allocator locking fix, from Brian
   - endianness fixes, from Brian
   - CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
     performance improvement on multithreaded workloads"

* tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits)
  bcachefs: Improve stripe checksum error message
  bcachefs: Simplify, fix bch2_backpointer_get_key()
  bcachefs: kill thing_it_points_to arg to backpointer_not_found()
  bcachefs: bch2_ec_read_extent() now takes btree_trans
  bcachefs: bch2_stripe_to_text() now prints ptr gens
  bcachefs: Don't iterate over journal entries just for btree roots
  bcachefs: Break up bch2_journal_write()
  bcachefs: Replace ERANGE with private error codes
  bcachefs: bkey_copy() is no longer a macro
  bcachefs: x-macro-ify inode flags enum
  bcachefs: Convert bch2_fs_open() to darray
  bcachefs: Move __bch2_members_v2_get_mut to sb-members.h
  bcachefs: bch2_prt_datetime()
  bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y
  bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage
  bcachefs: rebalance_work btree is not a snapshots btree
  bcachefs: Add missing printk newlines
  bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry
  bcachefs: .get_parent() should return an error pointer
  bcachefs: Fix bch2_delete_dead_inodes()
  ...

riscv: split cache ops out of dma-noncoherent.c

The cache ops are also used by the pmem code which is unconditionally
built into the kernel. Move them into a separate file that is built
based on the correct config option.

Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

MAINTAINERS: create an entry for exportfs

Split the exportfs entry from the nfsd entry and add myself as reviewer.

Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231026205553.143556-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>

iomap: rename iomap entry

Since this is now part of the vfs trees rename it accordingly and remove
the old tree referencing xfs.

Signed-off-by: Christian Brauner <brauner@kernel.org>

crypto: ahash - Set using_shash for cloned ahash wrapper over shash

The cloned child of ahash that uses shash under the hood should use
shash helpers (like crypto_shash_setkey()).

The following panic may be observed on TCP-AO selftests:

> ==================================================================
> BUG: KASAN: wild-memory-access in crypto_mod_get+0x1b/0x60
> Write of size 4 at addr 5d5be0ff5c415e14 by task connect_ipv4/1397
>
> CPU: 0 PID: 1397 Comm: connect_ipv4 Tainted: G        W          6.6.0+ #47
> Call Trace:
>  <TASK>
>  dump_stack_lvl+0x46/0x70
>  kasan_report+0xc3/0xf0
>  kasan_check_range+0xec/0x190
>  crypto_mod_get+0x1b/0x60
>  crypto_spawn_alg+0x53/0x140
>  crypto_spawn_tfm2+0x13/0x60
>  hmac_init_tfm+0x25/0x60
>  crypto_ahash_setkey+0x8b/0x100
>  tcp_ao_add_cmd+0xe7a/0x1120
>  do_tcp_setsockopt+0x5ed/0x12a0
>  do_sock_setsockopt+0x82/0x100
>  __sys_setsockopt+0xe9/0x160
>  __x64_sys_setsockopt+0x60/0x70
>  do_syscall_64+0x3c/0xe0
>  entry_SYSCALL_64_after_hwframe+0x46/0x4e
> ==================================================================
> general protection fault, probably for non-canonical address 0x5d5be0ff5c415e14: 0000 [#1] PREEMPT SMP KASAN
> CPU: 0 PID: 1397 Comm: connect_ipv4 Tainted: G    B   W          6.6.0+ #47
> Call Trace:
>  <TASK>
>  ? die_addr+0x3c/0xa0
>  ? exc_general_protection+0x144/0x210
>  ? asm_exc_general_protection+0x22/0x30
>  ? add_taint+0x26/0x90
>  ? crypto_mod_get+0x20/0x60
>  ? crypto_mod_get+0x1b/0x60
>  ? ahash_def_finup_done1+0x58/0x80
>  crypto_spawn_alg+0x53/0x140
>  crypto_spawn_tfm2+0x13/0x60
>  hmac_init_tfm+0x25/0x60
>  crypto_ahash_setkey+0x8b/0x100
>  tcp_ao_add_cmd+0xe7a/0x1120
>  do_tcp_setsockopt+0x5ed/0x12a0
>  do_sock_setsockopt+0x82/0x100
>  __sys_setsockopt+0xe9/0x160
>  __x64_sys_setsockopt+0x60/0x70
>  do_syscall_64+0x3c/0xe0
>  entry_SYSCALL_64_after_hwframe+0x46/0x4e
>  </TASK>
> RIP: 0010:crypto_mod_get+0x20/0x60

Make sure that the child/clone has using_shash set when parent is
an shash user.

Fixes: 2f1f34c1bf7b ("crypto: ahash - optimize performance when wrapping shash")
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Salam Noureddine <noureddine@arista.com>
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT

As JITTERENTROPY is selected by default if you enable the CRYPTO
API, any Kconfig options added there will show up for every single
user. Hide the esoteric options under EXPERT as well as FIPS so
that only distro makers will see them.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge patch series "riscv: tlb flush improvements"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

This series optimizes the tlb flushes on riscv which used to simply
flush the whole tlb whatever the size of the range to flush or the size
of the stride.

Patch 3 introduces a threshold that is microarchitecture specific and
will very likely be modified by vendors, not sure though which mechanism
we'll use to do that (dt? alternatives? vendor initialization code?).

* b4-shazam-merge:
  riscv: Improve flush_tlb_kernel_range()
  riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
  riscv: Improve flush_tlb_range() for hugetlb pages
  riscv: Improve tlb_flush()

Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Improve flush_tlb_kernel_range()

This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.

The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb

Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.

Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Improve flush_tlb_range() for hugetlb pages

flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form,
when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the
whole tlb: so set a stride of the size of the hugetlb mapping in order to
only flush the hugetlb mapping. However, if the hugepage is a NAPOT region,
all PTEs that constitute this mapping must be invalidated, so the stride
size must actually be the size of the PTE.

Note that THPs are directly handled by flush_pmd_tlb_range().

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Improve tlb_flush()

For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

idpf: fix potential use-after-free in idpf_tso()

skb_cow_head() can change skb->head (and thus skb_shinfo(skb))

We must not cache skb_shinfo(skb) before skb_cow_head().

Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Bailey Forrest <bcf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231103200451.514047-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tg3: power down device only on SYSTEM_POWER_OFF

Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.

This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).

The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.

Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Fix VF-VF direction matching in drop rule in switchdev

When adding a drop rule on a VF, rule direction is not being set, which
results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS
equals 0). Because of this, drop rules added on port representors don't
match any packets.

To fix it, set rule direction in drop action to egress when netdev is a
port representor, otherwise set it to ingress.

Fixes: 0960a27bd479 ("ice: Add direction metadata")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>