Dave Airlie [Thu, 15 Feb 2024 20:52:03 +0000 (06:52 +1000)]
Merge tag 'drm-intel-next-2024-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.9:
Features and functionality:
- Early transport for panel replay and PSR (Jouni)
- New ARL PCI IDs (Matt)
- DP TPS4 PHY test pattern support (Khaled)
Refactoring and cleanups:
- Unify and improve VSC SDP for PSR and non-PSR cases (Jouni)
- Refactor memory regions and improve debug logging (Ville)
- Rework global state serialization (Ville)
- Remove unused CDCLK divider fields (Gustavo)
- Unify HDCP connector logging format (Jani)
- Use display instead of graphics version in display code (Jani)
- Move VBT and opregion debugfs next to the implementation (Jani)
- Abstract opregion interface, use opaque type (Jani)
Fixes:
- Fix MTL stolen memory access (Ville)
- Fix initial display plane readout for MTL (Ville)
- Fix HPD handling during driver init/shutdown (Imre)
- Cursor vblank evasion fixes (Ville)
- Various VSC SDP fixes (Jouni)
- Allow PSR mode changes without full modeset (Jouni)
- Fix CDCLK sanitization on module load for Xe2_LPD (Gustavo)
- Fix the max DSC bpc supported by the source (Ankit)
- Add missing LNL ALPM AUX wake configuration (Jouni)
- Cx0 PHY state readout and verify fixes (Mika)
- Fix PSR (panel replay) debugfs for MST connectors (Imre)
- Fail HDCP repeater authentication if Type1 device not present (Suraj)
- Ratelimit debug logging in vm_fault_ttm (Nirmoy)
- Use a fake PCH for MTL because south display is not on the PCH (Haridhar)
- Disable DSB for Xe driver for now (José)
- Fix some LNL display register changes (Lucas)
- Fix build on ChromeOS (Paz Zcharya)
- Preserve current shared DPLL for fastsets on Type-C ports (Ville)
- Fix state checker warnings for MG/TC/TBT PLLs (Ville)
- Fix HDCP repeater ctl register value on errors (Jani)
- Allow FBC with CCS modifiers on SKL+ (Ville)
- Fix HDCP GGTT pinning (Ville)
DRM core changes:
- Add ratelimited drm dbg print (Nirmoy)
- DPCD PSR early transport macro (Jouni)
Merges:
- Backmerge drm-next to bring Xe driver to drm-intel-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cyt8cxsh.fsf@intel.com
Dave Airlie [Tue, 13 Feb 2024 01:32:23 +0000 (11:32 +1000)]
Merge tag 'amd-drm-next-6.9-2024-02-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.9-2024-02-09:
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- S3 fixes
- VCN 4.0.5 fixes
- DP MST fixes
- SR-IOV fixes
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
UAPI:
- Bump KFD version so UMDs know that the fixes that enable the management of
VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present
- Add INFO query for input power. This matches the existing INFO query for average
power. Used in gaming HUDs, etc.
Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209221459.5453-1-alexander.deucher@amd.com
Dave Airlie [Mon, 12 Feb 2024 03:00:53 +0000 (13:00 +1000)]
Merge tag 'drm-misc-next-2024-02-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
Cross-subsystem Changes:
dma-buf:
- clean up docs
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
Core Changes:
ci:
- add tests for msm
managed:
- add drmm_release_action() with tests
ttm:
- fix errno codes
- simply busy-placement handling
- fix page decryption
docs:
- add new external references
- clean up
Driver Changes:
amdgpu:
- clean up
bridge:
- imx: add i.MX8MP HDMI PVI plus DT bindings, add i.MX8MP HDMI TX plus DT
bindings
- samsung-dsim: add bsh-smm-s2/pro boards
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
- clean up
imx:
- use devm_ functions during init
- clean up
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
nouveau:
- clean up
panel:
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
panel-orientation-quirks:
- GPD Win Mini
vmwgfx:
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
- clean up
xlnx:
- fix live video input for ZynqMP DPSUB
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208164242.GA14321@linux.fritz.box
Jani Nikula [Tue, 23 Jan 2024 19:37:19 +0000 (21:37 +0200)]
drm/bridge: remove drm_bridge_get_edid() in favour of drm_bridge_edid_read()
All users of drm_bridge_get_edid() have been converted to use
drm_bridge_edid_read(). Remove drm_bridge_get_edid().
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c51d50edddbe8816eaa63e6ccafa9f2354b506ba.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:18 +0000 (21:37 +0200)]
drm/meson: switch to drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Not ideal, should use source physical address from connector info.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0a6556b4abaa341b5a3b9b466dbb23714369f7e1.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:17 +0000 (21:37 +0200)]
drm/bridge: tfp410: clear the EDID property on failures
If EDID read fails, clear the EDID property.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f49d95ce21e85495d73384acd184f4f9778368ee.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:16 +0000 (21:37 +0200)]
drm/bridge: tfp410: use drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f857bb36a78c57dc6a07b7b6cc90312fc3139ca8.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:15 +0000 (21:37 +0200)]
drm: bridge: simple-bridge: clear the EDID property on failures
If EDID read fails, clear the EDID property.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3e3c9505fa6859a96ead70121791fd9c4d946b6f.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:14 +0000 (21:37 +0200)]
drm: bridge: simple-bridge: use drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ae1fd3d94829e3e5c197ca58eb18108cb004cf0b.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:13 +0000 (21:37 +0200)]
drm/bridge: lt9611uxc: use drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b784ed15b792bb87f8c40b90c5c42591d7878643.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:12 +0000 (21:37 +0200)]
drm/bridge: lt8912b: use ->edid_read callback
Prefer using the struct drm_edid based functions.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/98f0356f1bd279bc337c904d8313c9afee530b48.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:11 +0000 (21:37 +0200)]
drm/bridge: lt8912b: clear the EDID property on failures
If EDID read fails, clear the EDID property.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2080adaadf4bba3d85f58c42c065caf9aad9a4ef.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:10 +0000 (21:37 +0200)]
drm/bridge: lt8912b: use drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:09 +0000 (21:37 +0200)]
drm/bridge: chrontel-ch7033: switch to drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/51691a606671d46696c0f1ab9492e6a1b691457b.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:08 +0000 (21:37 +0200)]
drm/bridge: switch to drm_bridge_edid_read()
Prefer using the struct drm_edid based functions.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/704941568475e6e0e40d99a595a67e887949a30f.1706038510.git.jani.nikula@intel.com
Jani Nikula [Tue, 23 Jan 2024 19:37:07 +0000 (21:37 +0200)]
drm/bridge: add ->edid_read hook and drm_bridge_edid_read()
Add new struct drm_edid based ->edid_read hook and
drm_bridge_edid_read() function to call the hook.
v2: Include drm/drm_edid.h
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9d08d22eaffcb9c59a2b677e45d7e61fc689bc2f.1706038510.git.jani.nikula@intel.com
Lijo Lazar [Fri, 8 Dec 2023 08:18:22 +0000 (13:48 +0530)]
drm/amdgpu: Fix HDP flush for VFs on nbio v7.9
HDP flush remapping is not done for VFs. Keep the original offsets in VF
environment.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Wed, 7 Feb 2024 04:50:57 +0000 (10:20 +0530)]
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nathan Chancellor [Mon, 5 Feb 2024 21:54:05 +0000 (14:54 -0700)]
drm/amd/display: Increase frame-larger-than for all display_mode_vba files
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit
6740ec97bcdb ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit
5b750b22530f ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Sat, 3 Feb 2024 00:30:59 +0000 (18:30 -0600)]
drm/amd/display: Clear phantom stream count and plane count
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6af ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiapeng Chong [Fri, 2 Feb 2024 08:47:26 +0000 (16:47 +0800)]
drm/amd/display: Simplify the calculation of variables
./drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c:236:49-51: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8169
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Wed, 31 Jan 2024 11:04:32 +0000 (16:34 +0530)]
drm/amdgpu: Avoid fetching VRAM vendor info
The present way to fetch VRAM vendor information turns out to be not
reliable on GFX 9.4.3 dGPUs as well. Avoid using the data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 29 Jan 2024 14:30:41 +0000 (09:30 -0500)]
drm/amd/display: 3.2.271
This version brings along the following:
- DCN35 fixes
- DMUB fixes
- Link training fixes
- Misc code style fixes
- MST fixes
- ODM fixes
- SubVP fixes
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Wed, 24 Jan 2024 23:57:14 +0000 (16:57 -0700)]
drm/amd/display: Drop some unnecessary guards
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code,
which may cause confusion. This commit dropped some of the unnecessary
guards.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 23 Jan 2024 16:17:04 +0000 (09:17 -0700)]
drm/amd/display: Trivial code style adjustment
Just adjust the code indentation in the header and add a simple comment
in the dm_cp_psp file.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 11 Jan 2024 21:25:27 +0000 (14:25 -0700)]
drm/amd/display: Disable ODM by default for DCN35
Just ensure that ODM optimization is disabled by default.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Thu, 11 Jan 2024 21:24:26 +0000 (14:24 -0700)]
drm/amd/display: Drop legacy code
Display code keeps getting improvements, and because of that, some
legacy code is left behind. This commit drops some of those unused
codes.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 26 Jan 2024 21:47:20 +0000 (16:47 -0500)]
drm/amd/display: Update phantom pipe enable / disable sequence
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 26 Jan 2024 19:20:45 +0000 (14:20 -0500)]
Revert "drm/amd/display: For FPO and SubVP/DRR configs program vmin/max sel"
This reverts commit
6b2b782ad6a25734ae847d1659bea3f613dbb563.
Since, it was causing regression for some DRR scenarios.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ethan Bitnun [Fri, 26 Jan 2024 16:33:32 +0000 (11:33 -0500)]
drm/amd/display: Adjust set_p_state calls to fix logging
Update the p_state type before update_clocks is called to ensure
accurate values are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ethan Bitnun [Fri, 26 Jan 2024 16:24:52 +0000 (11:24 -0500)]
drm/amd/display: Add delay before logging clks from hw
Add a small delay before reading clks from hw, to ensure correct values
are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Mon, 22 Jan 2024 18:43:46 +0000 (13:43 -0500)]
drm/amd/display: Fix MST Null Ptr for RV
The change try to fix below error specific to RV platform:
BUG: kernel NULL pointer dereference, address:
0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1
124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:
ffff960cc2df77d8 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
ffff8afb87e81280 RCX:
0000000000000224
RDX:
ffff8afb9ee37c00 RSI:
ffff8afb8da1a578 RDI:
ffff8afb87e81280
RBP:
ffff8afb83d67000 R08:
0000000000000001 R09:
ffff8afb9652f850
R10:
ffff960cc2df7908 R11:
0000000000000002 R12:
0000000000000000
R13:
ffff8afb8d7688a0 R14:
ffff8afb8da1a578 R15:
0000000000000224
FS:
00007f4dac35ce00(0000) GS:
ffff8afe30b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000008 CR3:
000000010ddc6000 CR4:
00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper
0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper
0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu
62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu
62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu
62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu
62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
? _copy_to_user+0x25/0x30
? drm_ioctl+0x296/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
drm_ioctl_kernel+0xcd/0x170
drm_ioctl+0x26d/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
amdgpu_drm_ioctl+0x4e/0x90 [amdgpu
62e600d2a75e9158e1cd0a243bdc8e6da040c054]
__x64_sys_ioctl+0x94/0xd0
do_syscall_64+0x60/0x90
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4dad17f76f
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c>
RSP: 002b:
00007ffd9ae859f0 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
000055e255a55900 RCX:
00007f4dad17f76f
RDX:
00007ffd9ae85a90 RSI:
00000000c03864bc RDI:
000000000000000b
RBP:
00007ffd9ae85a90 R08:
0000000000000003 R09:
0000000000000003
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000c03864bc
R13:
000000000000000b R14:
000055e255a7fc60 R15:
000055e255a01eb0
</TASK>
Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep >
typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas>
CR2:
0000000000000008
---[ end trace
0000000000000000 ]---
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:
ffff960cc2df77d8 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
ffff8afb87e81280 RCX:
0000000000000224
RDX:
ffff8afb9ee37c00 RSI:
ffff8afb8da1a578 RDI:
ffff8afb87e81280
RBP:
ffff8afb83d67000 R08:
0000000000000001 R09:
ffff8afb9652f850
R10:
ffff960cc2df7908 R11:
0000000000000002 R12:
0000000000000000
R13:
ffff8afb8d7688a0 R14:
ffff8afb8da1a578 R15:
0000000000000224
FS:
00007f4dac35ce00(0000) GS:
ffff8afe30b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000008 CR3:
000000010ddc6000 CR4:
00000000003506e0
With a second DP monitor connected, drm_atomic_state in dm atomic check
sequence does not include the connector state for the old/existing/first
DP monitor. In such case, dsc determination policy would hit a null ptr
when it tries to iterate the old/existing stream that does not have a
valid connector state attached to it. When that happens, dm atomic check
should call drm_atomic_get_connector_state for a new connector state.
Existing dm has already done that, except for RV due to it does not have
official support of dsc where .num_dsc is not defined in dcn10 resource
cap, that prevent from getting drm_atomic_get_connector_state called.
So, skip dsc determination policy for ASICs that don't have DSC support.
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Camille Cho [Thu, 28 Dec 2023 06:51:33 +0000 (14:51 +0800)]
drm/amd/display: correct comment in set_default_brightness_aux()
0 nits is a valid default value for OLED panels. So, update the relevant
comment to account for that fact.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Sat, 6 Jan 2024 03:01:03 +0000 (22:01 -0500)]
drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split
[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Wed, 29 Mar 2023 19:33:35 +0000 (15:33 -0400)]
drm/amd/display: Add debug option to force 1-tap chroma subsampling
[Why]
Default driver behaviour is 3-tap subsampling, so we should keep
it the same for test patterns as well. However, it is also useful
to force 1-tap subsampling for testing purposes.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 24 Jan 2024 15:51:49 +0000 (10:51 -0500)]
drm/amd/display: Disable idle reallow as part of command/gpint execution
[Why]
Workaroud for a race condition where DMCUB is in the process of
committing to IPS1 during the handshake causing us to miss the
transition into IPS2 and touch the INBOX1 RPTR causing a HW hang.
[How]
Disable the reallow to ensure that we have enough of a gap between entry
and exit and we're not seeing back-to-back wake_and_executes.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Mon, 5 Feb 2024 07:55:48 +0000 (15:55 +0800)]
drm/amdgpu: Fix shared buff copy to user
ta if invoke node buffer
|-------- ta type ----------|
|-------- ta id ----------|
|-------- cmd id ----------|
|------ shared buf len -----|
|------ shared buffer ------|
ta if invoke node buffer is as above, copy shared buffer data to correct location
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 23 Jan 2024 17:20:06 +0000 (12:20 -0500)]
drm/amd/display: Increase eval/entry delay for DCN35
[Why]
To match firmware measurements and avoid hanging when accessing HW
that's in idle.
[How]
Increase the delays to what we've measured.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 23 Jan 2024 17:14:42 +0000 (12:14 -0500)]
drm/amd/display: Disable timeout in more places for dc_dmub_srv
[Why]
We're still missing a few and we'd like to avoid continuining when
a hang occurs for debug purposes.
[How]
Add the loop anywhere we try to wait on rptr == wptr in dc_dmub_srv.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Thu, 1 Feb 2024 17:17:15 +0000 (22:47 +0530)]
drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()'
The issue arises when the array 'adev->vcn.vcn_config' is accessed
before checking if the index 'adev->vcn.num_vcn_inst' is within the
bounds of the array.
The fix involves moving the bounds check before the array access. This
ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array
before it is used as an index.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.
Fixes: a0ccc717c4ab ("drm/amdgpu/discovery: validate VCN and SDMA instances")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Fri, 2 Feb 2024 10:27:32 +0000 (18:27 +0800)]
drm/amd/pm: Retrieve UMC ODECC error count from aca bank
Instead of software managed counters.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 16 Jan 2024 14:52:58 +0000 (09:52 -0500)]
drm/amd/display: Add more checks for exiting idle in DC
[Why]
Any interface that touches registers needs to wake up the system.
[How]
Add a new interface dc_exit_ips_for_hw_access that wraps the check
for IPS support and insert it into the public DC interfaces that
touch registers.
We don't re-enter, since we expect that the enter/exit to have been done
on the DM side.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allen Pan [Tue, 23 Jan 2024 20:14:40 +0000 (15:14 -0500)]
drm/amd/display: correct static screen event mask
[Why]
Hardware register definition changed
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Li Ma [Thu, 1 Feb 2024 11:31:06 +0000 (19:31 +0800)]
drm/amdgpu: remove asymmetrical irq disabling in jpeg 4.0.5 suspend
A supplement to commit:
615dd56ac5379f4239940be69139a33e79e59c67
There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume.
Fixes: 615dd56ac537 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend")
Signed-off-by: Li Ma <li.ma@amd.com>
Acked-By: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Wed, 17 Jan 2024 05:39:37 +0000 (13:39 +0800)]
drm/amdgpu: reset gpu for s3 suspend abort case
In the s3 suspend abort case some type of gfx9 power
rail not turn off from FCH side and this will put the
GPU in an unknown power status, so let's reset the gpu
to a known good power state before reinitialize gpu
device.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Tue, 16 Jan 2024 11:10:45 +0000 (19:10 +0800)]
drm/amdgpu: skip to program GFXDEC registers for suspend abort
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 18 Jan 2024 23:12:15 +0000 (18:12 -0500)]
drm/amd/display: set odm_combine_policy based on context in dcn32 resource
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Tue, 16 Jan 2024 18:46:53 +0000 (13:46 -0500)]
drm/amd/display: Don't perform rate toggle on DP2-capable FIXED_VS retimers
[WHY]
Only required if FIXED_VS retimer does not support DP2-capable.
[HOW]
Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joseph Greathouse [Sat, 20 Jan 2024 02:01:50 +0000 (20:01 -0600)]
drm/amdkfd: Add cache line sizes to KFD topology
The KFD topology includes cache line size, but we have not been
filling that information out unless we are parsing a CRAT table.
Fill in this information for the devices where we have cache
information structs, and pipe this information to the topology
sysfs files.
v2: squash in fix from Joe (Alex)
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Fri, 5 Jan 2024 16:20:48 +0000 (11:20 -0500)]
drm/amd/display: Remove Legacy FIXED_VS Transparent LT Sequence
The New sequence has been in use in DCN314 with no regressions
introduced. Therefore, it is safe to enable this sequence for all
devices using FIXED_VS retimers. So, remove the legacy codepath and its
associated config flag.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Fri, 26 Jan 2024 21:27:10 +0000 (16:27 -0500)]
drm/amd/display: add panel_power_savings sysfs entry to eDP connectors
We want programs besides the compositor to be able to enable or disable
panel power saving features. However, since they are currently only
configurable through DRM properties, that isn't possible. So, to remedy
that issue introduce a new "panel_power_savings" sysfs attribute.
v2: squash in fix from Hamza (Alex)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qiang Ma [Wed, 31 Jan 2024 07:57:03 +0000 (15:57 +0800)]
drm/amdgpu: Clear the hotplug interrupt ack bit before hpd initialization
Problem:
The computer in the bios initialization process, unplug the HDMI display,
wait until the system up, plug in the HDMI display, did not enter the
hotplug interrupt function, the display is not bright.
Fix:
After the above problem occurs, and the hpd ack interrupt bit is 1,
the interrupt should be cleared during hpd_init initialization so that
when the driver is ready, it can respond to the hpd interrupt normally.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 11 Jan 2024 15:56:33 +0000 (10:56 -0500)]
drm/amdgpu: fix typo in parameter description
Missing space.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shaoyunl [Wed, 31 Jan 2024 14:20:07 +0000 (09:20 -0500)]
drm/amdgpu: Only create mes event log debugfs when mes is enabled
Skip the debugfs file creation for mes event log if the GPU
doesn't use MES. This to prevent potential kernel oops when
user try to read the event log in debugfs on a GPU without MES
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Wed, 31 Jan 2024 03:19:41 +0000 (08:49 +0530)]
drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sat, 27 Jan 2024 13:04:01 +0000 (18:34 +0530)]
drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Jun [Wed, 31 Jan 2024 02:19:20 +0000 (10:19 +0800)]
drm/amdgpu/pm: Use inline function for IP version check
Use existing inline function for IP version check.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anatoliy Klymenko [Wed, 24 Jan 2024 02:54:01 +0000 (18:54 -0800)]
drm: xlnx: zynqmp_dpsub: Filter interrupts against mask
Filter out status register against the interrupts' mask.
Some events are being reported via DP status register, even if
corresponding interrupts have been disabled. One instance of such event
leads to generation of VBLANK when the driver is in DRM bridge mode,
which in turn results in NULL pointer dereferencing. We should avoid
processing such events in an interrupt handler context.
This problem is less noticeable when the driver operates in DMA mode, as
in this case we have DRM CRTC object instantiated and DRM framework
simply discards unwanted VBLANKs in drm_handle_vblank().
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-5-anatoliy.klymenko@amd.com
Anatoliy Klymenko [Wed, 24 Jan 2024 02:54:00 +0000 (18:54 -0800)]
drm: xlnx: zynqmp_dpsub: Clear status register ASAP
Clear status register as soon as we read it.
Addressing comments from
https://lore.kernel.org/dri-devel/
beb551c7-bb7e-4cd0-b166-
e9aad90c4620@ideasonboard.com/
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-4-anatoliy.klymenko@amd.com
Anatoliy Klymenko [Wed, 24 Jan 2024 02:53:59 +0000 (18:53 -0800)]
drm: xlnx: zynqmp_dpsub: Fix timing for live mode
Expect external video timing in live video input mode, program
DPSUB acordingly.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-3-anatoliy.klymenko@amd.com
Anatoliy Klymenko [Wed, 24 Jan 2024 02:53:58 +0000 (18:53 -0800)]
drm: xlnx: zynqmp_dpsub: Make drm bridge discoverable
ZynqMP DPSUB supports 2 input modes: DMA based and live video.
In the first mode, the driver implements CRTC and DP encoder DRM bridge
to model the complete display pipeline. In this case, DRM bridge is
being directly instantiated within the driver, not using any bridge
discovery mechanisms.
In the live video input mode video signal is generated by FPGA fabric
and passed into DPSUB over the connected bus. In this mode driver
exposes the DP encoder as a DRM bridge, expecting external CRTC to
discover it via drm_of_find_panel_or_bridge() or a similar call. This
discovery relies on drm_bridge.of_node being properly set.
Assign device OF node to the bridge prior to registering it. This will
make said bridge discoverable by an external CRTC driver.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-2-anatoliy.klymenko@amd.com
Thomas Zimmermann [Wed, 7 Feb 2024 12:01:19 +0000 (13:01 +0100)]
Merge drm/drm-next into drm-misc-next
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Ricardo B. Marliere [Sat, 3 Feb 2024 18:25:04 +0000 (15:25 -0300)]
drm: mipi-dsi: make mipi_dsi_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the mipi_dsi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-gpu-v1-2-1b6ecdb5f941@marliere.net
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203-bus_cleanup-gpu-v1-2-1b6ecdb5f941@marliere.net
Ricardo B. Marliere [Sat, 3 Feb 2024 18:25:03 +0000 (15:25 -0300)]
drm: display: make dp_aux_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the dp_aux_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-gpu-v1-1-1b6ecdb5f941@marliere.net
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203-bus_cleanup-gpu-v1-1-1b6ecdb5f941@marliere.net
Adam Ford [Wed, 7 Feb 2024 00:23:04 +0000 (18:23 -0600)]
drm/bridge: imx8mp-hdmi-pvi: Fix build warnings
Two separate build warnings were reported. One from an
uninitialized variable, and the other from returning 0
instead of NULL from a pointer.
Fixes: 059c53e877ca ("drm/bridge: imx: add driver for HDMI TX Parallel Video Interface")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402062134.a6CqAt3s-lkp@intel.com/
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240207002305.618499-1-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207002305.618499-1-aford173@gmail.com
Randy Dunlap [Mon, 5 Feb 2024 06:27:08 +0000 (22:27 -0800)]
drm/panel: re-alphabetize the menu list
A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205062711.3513-1-rdunlap@infradead.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205062711.3513-1-rdunlap@infradead.org
Raphael Gallais-Pou [Mon, 5 Feb 2024 09:26:50 +0000 (10:26 +0100)]
drm/panel: simple: push blanking limit on RK32FN48H
Push horizontal front porch and vertical back porch blanking limit.
This allows to get a 60 fps sharp.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com
Raphael Gallais-Pou [Mon, 5 Feb 2024 09:06:54 +0000 (10:06 +0100)]
drm/panel: simple: fix flags on RK043FN48H
DISPLAY_FLAGS_SYNC_POSEDGE is missing in the flags on the default
timings. When overriding the default mode with one described in the
device tree, the mode does not get acked because of this missing flag.
Moreover since the panel is driven by the positive edge it makes sense
to add it here.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com
Jouni Högander [Tue, 30 Jan 2024 11:11:30 +0000 (13:11 +0200)]
drm/i915/alpm: Alpm aux wake configuration for lnl
Lunarlake has some configurations in ALPM_CTL register for legacy ALPM as
well. Write these.
Bspec: 71477
v2: move version check to lnl_alpm_configure
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-5-jouni.hogander@intel.com
Jouni Högander [Tue, 30 Jan 2024 11:11:29 +0000 (13:11 +0200)]
drm/i915/alpm: Calculate ALPM Entry check
ALPM Entry Check represents the number of lines needed to put the main link
to sleep and keep it in the sleep state before it can be taken out of the
SLEEP state (eDP requires the main link to be in the SLEEP state for a
minimum of 5us).
Bspec: 71477
v2: move display version check into _lnl_compute_alpm_param
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-4-jouni.hogander@intel.com
Jouni Högander [Tue, 30 Jan 2024 11:11:28 +0000 (13:11 +0200)]
drm/i915/psr: Add alpm_parameters struct
Add new alpm_parameters struct into intel_psr for all calculated
alpm parameters.
v2: Move alpm_parameters struct definition to intel_psr struct
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-3-jouni.hogander@intel.com
Jouni Högander [Tue, 30 Jan 2024 11:11:27 +0000 (13:11 +0200)]
drm/i915/alpm: Add ALPM register definitions
Add ALPM register definitions for Lunar Lake.
v3:
- Fix ALPM_CTL2_A address
- Remove duplicate defines
v2:
- Use REG_BIT instead of BIT
- Add commit message
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130111130.3298779-2-jouni.hogander@intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:40 +0000 (00:43 +0200)]
drm/i915: Annotate more of the BIOS fb takeover failure paths
Annotate a few more of the failure paths on the initial
BIOS fb takeover to avoid having to guess why things
aren't working the way we expect.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-17-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:39 +0000 (00:43 +0200)]
drm/i915: Try to relocate the BIOS fb to the start of ggtt
On MTL the GOP (for whatever reason) likes to bind its framebuffer
high up in the ggtt address space. This can conflict with whatever
ggtt_reserve_guc_top() is trying to do, and the result is that
ggtt_reserve_guc_top() fails and then we proceed to explode when
trying to tear down the driver. Thus far I haven't analyzed what
causes the actual fireworks, but it's not super important as even
if it didn't explode we'd still fail the driver load and the user
would be left with an unusable GPU.
To remedy this (without having to figure out exactly what
ggtt_reserve_guc_top() is trying to achieve) we can attempt to
relocate the BIOS framebuffer to a lower ggtt address. We can do
this at this early point in driver init because nothing else is
supposed to be clobbering the ggtt yet. So we simply change where
in the ggtt we pin the vma, the original PTEs will be left as is,
and the new PTEs will get written with the same dma addresses.
The plane will keep on scanning out from the original PTEs until
we are done with the whole process, and at that point we rewrite
the plane's surface address register to point at the new ggtt
address.
Since we don't need a specific ggtt address for the plane
(apart from needing it to land in the mappable region for
normal stolen objects) we'll just try to pin it without a fixed
offset first. It should end up at the lowest available address
(which really should be 0 at this point in the driver init).
If that fails we'll fall back to just pinning it exactly to the
origianal address.
To make sure we don't accidentlally pin it partially over the
original ggtt range (as that would corrupt the original PTEs)
we reserve the original range temporarily during this process.
v2: Try to pin explicitly to ggtt offset 0 as otherwise DG2 puts it
even higher (atm we have no PIN_LOW flag to force it low)
v3: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-16-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ville Syrjälä [Fri, 2 Feb 2024 22:43:38 +0000 (00:43 +0200)]
drm/i915: Tweak BIOS fb reuse check
Currently we assume that we bind the BIOS fb exactly into the same
ggtt address where the BIOS left it. That is about to change, and
in order to keep intel_reuse_initial_plane_obj() working as intended
we need to compare the original ggtt offset (called 'base' here)
as opposed to the actual vma ggtt offset we selected. Otherwise
the first plane could change the ggtt offset, and then subsequent
planes would no longer notice that they are in fact using the same
ggtt offset that the first plane was already using. Thus the reuse
check will fail and we proceed to turn off these subsequent planes.
TODO: would probably make more sense to do the pure readout first
for all the planes, then check for fb reuse, and only then proceed
to pin the object into the final location in the ggtt...
v2: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-15-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ville Syrjälä [Fri, 2 Feb 2024 22:43:37 +0000 (00:43 +0200)]
drm/i915/fbdev: Fix smem_start for LMEMBAR stolen objects
The "io" address of an object is its dma address minus the
region.start. Subtract the latter to make smem_start correct.
The current code happens to work for genuine LMEM objects
as LMEM region.start==0, but for LMEMBAR stolen objects
region.start!=0.
TODO: perhaps just set smem_start=0 always as our .fb_mmap()
implementation no longer depends on it? Need to double check
it's not needed for anything else...
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-14-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:36 +0000 (00:43 +0200)]
drm/i915: Simplify intel_initial_plane_config() calling convention
There's no reason the caller of intel_initial_plane_config() should
have to loop over the CRTCs. Pull the loop into the function to
make life simpler for the caller.
v2: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-13-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ville Syrjälä [Fri, 2 Feb 2024 22:43:35 +0000 (00:43 +0200)]
drm/i915: Split the smem and lmem plane readout apart
Declutter initial_plane_vma() a bit by pulling the lmem and smem
readout paths into their own functions.
TODO: the smem path should still be fixed to get and validate
the dma address from the pte as well
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-12-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:34 +0000 (00:43 +0200)]
drm/i915: s/phys_base/dma_addr/
The address we read from the PTE is a dma address, not a physical
address. Rename the variable to say so.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-11-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:33 +0000 (00:43 +0200)]
drm/i915: Fix MTL initial plane readout
MTL stolen memory looks more like local memory, so use the
(now fixed) lmem path when doing the initial plane readout.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-10-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:32 +0000 (00:43 +0200)]
drm/i915: Fix region start during initial plane readout
On MTL the stolen region starts at offset 8MiB from the start of
LMEMBAR. The dma addresses are thus also offset by 8MiB. However the
mm_node/etc. is zero based, and i915_pages_create_for_stolen() will
add the appropriate region.start into the sg dma address. So when
we do the readout we need to convert the dma address read from
the PTE to be zero based as well.
Note that currently we don't take this path on MTL, but we should
and thus this needs to be fixed. For lmem this works correctly
already as the lmem region.start==0.
While at it let's also make sure the address points to somewhere within
the memory region. We don't need to check the size as
i915_gem_object_create_region_at() should later fail if the object size
exceeds the region size.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-9-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:31 +0000 (00:43 +0200)]
drm/i915: Fix PTE decode during initial plane readout
When multiple pipes are enabled by the BIOS we try to read out each
in turn. But we do the readout for the second only after the inherited
vma for the first has been rebound into its original place (and thus
the PTEs have been rewritten). Unlike the BIOS we set some high caching
bits in the PTE on MTL which confuses the readout for the second plane.
Filter out the non-address bits from the PTE value appropriately to
fix this.
I suppose it might also be possible that the BIOS would already set
some caching bits as well, in which case we'd run into this same
issue already for the first plane.
TODO:
- should abstract the PTE decoding to avoid details leaking all over
- should probably do the readout for all the planes before
we touch anything (including the PTEs) so that we truly read
out the BIOS state
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-8-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:30 +0000 (00:43 +0200)]
drm/i915: Rename the DSM/GSM registers
0x108100 and 0x1080c0 have been around since snb. Rename the
defines appropriately.
v2: Rebase
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:29 +0000 (00:43 +0200)]
drm/i915: Disable the "binder"
Now that the GGTT PTE updates go straight to GSMBASE (bypassing
GTTMMADR) there should be no more risk of system hangs? So the
"binder" (ie. update the PTEs via MI_UPDATE_GTT) is no longer
necessary, disable it.
My main worry with the MI_UPDATE_GTT are:
- only used on this one platform so very limited testing coverage
- async so more opprtunities to screw things up
- what happens if the engine hangs while we're waiting for MI_UPDATE_GTT
to finish?
- requires working command submission, so even getting a working
display now depends on a lot more extra components working correctly
TODO: MI_UPDATE_GTT might be interesting as an optimization
though, so perhaps someone should look into always using it
(assuming the GPU is alive and well)?
v2: Keep using MI_UPDATE_GTT on VM guests
v3: use i915_direct_stolen_access()
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-6-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:28 +0000 (00:43 +0200)]
drm/i915: Bypass LMEMBAR/GTTMMADR for MTL stolen memory access
On MTL accessing stolen memory via the BARs is somehow borked,
and it can hang the machine. As a workaround let's bypass the
BARs and just go straight to DSMBASE/GSMBASE instead.
Note that on every other platform this itself would hang the
machine, but on MTL the system firmware is expected to relax
the access permission guarding stolen memory to enable this
workaround, and thus direct CPU accesses should be fine.
The raw stolen memory areas won't be passed to VMs so we'll
need to risk using the BAR there for the initial setup. Once
command submission is up we should switch to MI_UPDATE_GTT
which at least shouldn't hang the whole machine.
v2: Don't use direct GSM/DSM access on guests
Add w/a number
v3: Check register 0x138914 to see if pcode did its job
Add some debug prints
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:27 +0000 (00:43 +0200)]
drm/i915: Remove ad-hoc lmem/stolen debugs
Now that intel_memory_regions_hw_probe() prints out each and every
memory region there's no reason to have ad-hoc debugs to do similar
things elsewhere.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:26 +0000 (00:43 +0200)]
drm/i915: Print memory region info during probe
Dump the details about every memory region into dmesg at probe time.
Avoids having to dig those out from random places when debugging stuff.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 2 Feb 2024 22:43:25 +0000 (00:43 +0200)]
drm/i915: Use struct resource for memory region IO as well
mem->region is a struct resource, but mem->io_start and
mem->io_size are not for whatever reason. Let's unify this
and convert the io stuff into a struct resource as well.
Should make life a little less annoying when you don't have
juggle between two different approaches all the time.
Mostly done using cocci (with manual tweaks at all the
places where we mutate io_size by hand):
@@
struct intel_memory_region *M;
expression START, SIZE;
@@
- M->io_start = START;
- M->io_size = SIZE;
+ M->io = DEFINE_RES_MEM(START, SIZE);
@@
struct intel_memory_region *M;
@@
- M->io_start
+ M->io.start
@@
struct intel_memory_region M;
@@
- M.io_start
+ M.io.start
@@
expression M;
@@
- M->io_size
+ resource_size(&M->io)
@@
expression M;
@@
- M.io_size
+ resource_size(&M.io)
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-2-ville.syrjala@linux.intel.com
Lucas Stach [Sat, 3 Feb 2024 16:52:50 +0000 (10:52 -0600)]
drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-11-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-11-aford173@gmail.com
Lucas Stach [Sat, 3 Feb 2024 16:52:49 +0000 (10:52 -0600)]
dt-bindings: display: imx: add binding for i.MX8MP HDMI TX
The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
core with a little bit of SoC integration around it.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240203165307.7806-10-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-10-aford173@gmail.com
Matthew Brost [Wed, 31 Jan 2024 03:03:02 +0000 (19:03 -0800)]
drm/sched: Add Matthew Brost to maintainers
Add Matthew Brost to DRM scheduler maintainers.
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131030302.2088173-1-matthew.brost@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Jeffrey Hugo [Fri, 2 Feb 2024 20:23:29 +0000 (13:23 -0700)]
dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
The servers for the @codeaurora domain are long retired and any messages
sent there bounce. Sandeep Panda's email address is no longer valid and
should be repleaced. However Sandeep has left the company and has not
been active sice, therefore it looks like this binding is orphaned.
Doug is listed as the reviewer for this file in MAINTAINERS and has
volunteered to be listed within the file as the binding maintainer.
Therefore replace Sandeep with Doug to make the documentation current.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202202329.4172917-1-quic_jhugo@quicinc.com
Ville Syrjälä [Fri, 15 Dec 2023 11:09:32 +0000 (13:09 +0200)]
drm/i915/hdcp: Pin the hdcp gsc message high in ggtt
AFAICS there is no hardware restriction on where in ggtt
the hdcp gsc message object needs to be bound. And as it's
a regular shmem object we don't need it be in the mappabe
range either. So pin it high to make avoid needlessly
wasting the precious mappable range for it.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-3-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Ville Syrjälä [Fri, 15 Dec 2023 11:09:31 +0000 (13:09 +0200)]
drm/i915/hdcp: Do intel_hdcp_component_init() much later during init
intel_hdcp_component_init()->...->intel_hdcp_gsc_initialize_message()
will allocate ggtt address space for some hdcp gsc message thing.
That is currently being done way too early as we haven't even
taken over the BIOS fb yet. So this has the potential of corrupting
ggtt PTEs that need to be preserved until the BIOS fb takover
is done.
Only call intel_hdcp_component_init() once all the BIOS fb takeover,
and full ggtt init (which currently also needs to reserve very
specific ranges of ggtt, thus assuming that no one else has stolen
them yet) is done.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-2-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Lucas Stach [Sat, 3 Feb 2024 16:52:48 +0000 (10:52 -0600)]
drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-9-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-9-aford173@gmail.com
Lucas Stach [Sat, 3 Feb 2024 16:52:47 +0000 (10:52 -0600)]
dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
Add binding for the i.MX8MP HDMI parallel video interface block.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-8-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-8-aford173@gmail.com
Jessica Zhang [Fri, 2 Feb 2024 21:50:21 +0000 (13:50 -0800)]
drm/panel: visionox-r66451: Set prepare_prev_first flag
The DSI host needs to be enabled for the panel to be initialized in
prepare(). Ensure this happens by setting prepare_prev_first.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
Randy Dunlap [Mon, 5 Feb 2024 05:41:01 +0000 (21:41 -0800)]
drm/rect: fix kernel-doc typos
Correct typos of "translated".
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205054101.27929-1-rdunlap@infradead.org
Dave Airlie [Mon, 5 Feb 2024 03:49:47 +0000 (13:49 +1000)]
Merge tag 'drm-misc-next-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
virtio:
- add Venus capset defines
Cross-subsystem Changes:
Core Changes:
- fix drm_fixp2int_ceil()
- documentation fixes
- clean ups
- allow DRM_MM_DEBUG with DRM=m
- build fixes for debugfs support
- EDID cleanups
- sched: error-handling fixes
- ttm: add tests
Driver Changes:
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- tc358767: fix regmap usage
efifb:
- use copy of global screen_info state
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
simplefb:
- fix logging
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
vesafb:
- use copy of global screen_info state
virtio:
- cleanups
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111154902.GA8448@linux-uq9g
Linus Torvalds [Sun, 4 Feb 2024 12:20:36 +0000 (12:20 +0000)]
Linux 6.8-rc3