ASoC: codecs: tlv*: rename to snd_soc_component_read()
authorKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tue, 16 Jun 2020 05:20:46 +0000 (14:20 +0900)
committerMark Brown <broonie@kernel.org>
Mon, 22 Jun 2020 14:13:42 +0000 (15:13 +0100)
We need to use snd_soc_component_read()
instead of     snd_soc_component_read32()

This patch renames _read32() to _read()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1074mds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tlv320aic23.c
sound/soc/codecs/tlv320aic26.c
sound/soc/codecs/tlv320aic32x4.c
sound/soc/codecs/tlv320aic3x.c

index 9868fb22323c5f393cac98aebac39d2eb8d0e86c..d22f75e8fb6a9b372561b19fc77d4704c9b18ee8 100644 (file)
@@ -91,7 +91,7 @@ static int snd_soc_tlv320aic23_put_volsw(struct snd_kcontrol *kcontrol,
        */
        val = (val >= 4) ? 4  : (3 - val);
 
-       reg = snd_soc_component_read32(component, TLV320AIC23_ANLG) & (~0x1C0);
+       reg = snd_soc_component_read(component, TLV320AIC23_ANLG) & (~0x1C0);
        snd_soc_component_write(component, TLV320AIC23_ANLG, reg | (val << 6));
 
        return 0;
@@ -103,7 +103,7 @@ static int snd_soc_tlv320aic23_get_volsw(struct snd_kcontrol *kcontrol,
        struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
        u16 val;
 
-       val = snd_soc_component_read32(component, TLV320AIC23_ANLG) & (0x1C0);
+       val = snd_soc_component_read(component, TLV320AIC23_ANLG) & (0x1C0);
        val = val >> 6;
        val = (val >= 4) ? 4  : (3 -  val);
        ucontrol->value.integer.value[0] = val;
@@ -294,7 +294,7 @@ static int find_rate(int mclk, u32 need_adc, u32 need_dac)
 static void get_current_sample_rates(struct snd_soc_component *component, int mclk,
                u32 *sample_rate_adc, u32 *sample_rate_dac)
 {
-       int src = snd_soc_component_read32(component, TLV320AIC23_SRATE);
+       int src = snd_soc_component_read(component, TLV320AIC23_SRATE);
        int sr = (src >> 2) & 0x0f;
        int val = (mclk / bosr_usb_divisor_table[src & 3]);
        int adc = (val * sr_adc_mult_table[sr]) / SR_MULT;
@@ -356,7 +356,7 @@ static int tlv320aic23_hw_params(struct snd_pcm_substream *substream,
        if (ret < 0)
                return ret;
 
-       iface_reg = snd_soc_component_read32(component, TLV320AIC23_DIGT_FMT) & ~(0x03 << 2);
+       iface_reg = snd_soc_component_read(component, TLV320AIC23_DIGT_FMT) & ~(0x03 << 2);
 
        switch (params_width(params)) {
        case 16:
@@ -409,7 +409,7 @@ static int tlv320aic23_mute(struct snd_soc_dai *dai, int mute)
        struct snd_soc_component *component = dai->component;
        u16 reg;
 
-       reg = snd_soc_component_read32(component, TLV320AIC23_DIGT);
+       reg = snd_soc_component_read(component, TLV320AIC23_DIGT);
        if (mute)
                reg |= TLV320AIC23_DACM_MUTE;
 
@@ -427,7 +427,7 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai,
        struct snd_soc_component *component = codec_dai->component;
        u16 iface_reg;
 
-       iface_reg = snd_soc_component_read32(component, TLV320AIC23_DIGT_FMT) & (~0x03);
+       iface_reg = snd_soc_component_read(component, TLV320AIC23_DIGT_FMT) & (~0x03);
 
        /* set master/slave audio interface */
        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -479,7 +479,7 @@ static int tlv320aic23_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 static int tlv320aic23_set_bias_level(struct snd_soc_component *component,
                                      enum snd_soc_bias_level level)
 {
-       u16 reg = snd_soc_component_read32(component, TLV320AIC23_PWR) & 0x17f;
+       u16 reg = snd_soc_component_read(component, TLV320AIC23_PWR) & 0x17f;
 
        switch (level) {
        case SND_SOC_BIAS_ON:
index b9ca3afd47766218b0e375d60be25e7c0afc2499..032b3973564384b3598e64326d6a1b50c5d47bc1 100644 (file)
@@ -266,7 +266,7 @@ static ssize_t aic26_keyclick_show(struct device *dev,
        struct aic26 *aic26 = dev_get_drvdata(dev);
        int val, amp, freq, len;
 
-       val = snd_soc_component_read32(aic26->component, AIC26_REG_AUDIO_CTRL2);
+       val = snd_soc_component_read(aic26->component, AIC26_REG_AUDIO_CTRL2);
        amp = (val >> 12) & 0x7;
        freq = (125 << ((val >> 8) & 0x7)) >> 1;
        len = 2 * (1 + ((val >> 4) & 0xf));
@@ -306,7 +306,7 @@ static int aic26_probe(struct snd_soc_component *component)
        snd_soc_component_write(component, AIC26_REG_POWER_CTRL, 0);
 
        /* Audio Control 3 (master mode, fsref rate) */
-       reg = snd_soc_component_read32(component, AIC26_REG_AUDIO_CTRL3);
+       reg = snd_soc_component_read(component, AIC26_REG_AUDIO_CTRL3);
        reg &= ~0xf800;
        reg |= 0x0800; /* set master mode */
        snd_soc_component_write(component, AIC26_REG_AUDIO_CTRL3, reg);
index d087f3b20b1d5a2e60790efd1eedac6431d4b649..8682daec016e3fdb5cfad0d7deb3675e2934ebc3 100644 (file)
@@ -82,7 +82,7 @@ static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol,
        struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
        u8 val;
 
-       val = snd_soc_component_read32(component, AIC32X4_DINCTL);
+       val = snd_soc_component_read(component, AIC32X4_DINCTL);
 
        ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -96,7 +96,7 @@ static int aic32x4_set_mfp2_gpio(struct snd_kcontrol *kcontrol,
        u8 val;
        u8 gpio_check;
 
-       val = snd_soc_component_read32(component, AIC32X4_DOUTCTL);
+       val = snd_soc_component_read(component, AIC32X4_DOUTCTL);
        gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
        if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
                printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n",
@@ -123,7 +123,7 @@ static int aic32x4_get_mfp3_gpio(struct snd_kcontrol *kcontrol,
        struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
        u8 val;
 
-       val = snd_soc_component_read32(component, AIC32X4_SCLKCTL);
+       val = snd_soc_component_read(component, AIC32X4_SCLKCTL);
 
        ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -137,7 +137,7 @@ static int aic32x4_set_mfp4_gpio(struct snd_kcontrol *kcontrol,
        u8 val;
        u8 gpio_check;
 
-       val = snd_soc_component_read32(component, AIC32X4_MISOCTL);
+       val = snd_soc_component_read(component, AIC32X4_MISOCTL);
        gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
        if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
                printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n",
@@ -164,7 +164,7 @@ static int aic32x4_get_mfp5_gpio(struct snd_kcontrol *kcontrol,
        struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
        u8 val;
 
-       val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+       val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
        ucontrol->value.integer.value[0] = ((val & 0x2) >> 1);
 
        return 0;
@@ -177,7 +177,7 @@ static int aic32x4_set_mfp5_gpio(struct snd_kcontrol *kcontrol,
        u8 val;
        u8 gpio_check;
 
-       val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+       val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
        gpio_check = (val & AIC32X4_MFP5_GPIO_OUTPUT);
        if (gpio_check != AIC32X4_MFP5_GPIO_OUTPUT) {
                printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n",
@@ -978,7 +978,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
                        AIC32X4_LDOCTLEN : 0;
        snd_soc_component_write(component, AIC32X4_LDOCTL, tmp_reg);
 
-       tmp_reg = snd_soc_component_read32(component, AIC32X4_CMMODE);
+       tmp_reg = snd_soc_component_read(component, AIC32X4_CMMODE);
        if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36)
                tmp_reg |= AIC32X4_LDOIN_18_36;
        if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED)
@@ -1004,7 +1004,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
         * and down for the first capture to work properly. It seems related to
         * a HW BUG or some kind of behavior not documented in the datasheet.
         */
-       tmp_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP);
+       tmp_reg = snd_soc_component_read(component, AIC32X4_ADCSETUP);
        snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg |
                                AIC32X4_LADC_EN | AIC32X4_RADC_EN);
        snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg);
index 424faafcb85b9de74c05a1a0fdc052e602e04437..6860743ecdca753ad47755570efa146bf9535cbb 100644 (file)
@@ -1056,7 +1056,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
                width = params_width(params);
 
        /* select data word length */
-       data = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
+       data = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
        switch (width) {
        case 16:
                break;
@@ -1219,8 +1219,8 @@ static int aic3x_prepare(struct snd_pcm_substream *substream,
 static int aic3x_mute(struct snd_soc_dai *dai, int mute)
 {
        struct snd_soc_component *component = dai->component;
-       u8 ldac_reg = snd_soc_component_read32(component, LDAC_VOL) & ~MUTE_ON;
-       u8 rdac_reg = snd_soc_component_read32(component, RDAC_VOL) & ~MUTE_ON;
+       u8 ldac_reg = snd_soc_component_read(component, LDAC_VOL) & ~MUTE_ON;
+       u8 rdac_reg = snd_soc_component_read(component, RDAC_VOL) & ~MUTE_ON;
 
        if (mute) {
                snd_soc_component_write(component, LDAC_VOL, ldac_reg | MUTE_ON);
@@ -1256,8 +1256,8 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
        struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
        u8 iface_areg, iface_breg;
 
-       iface_areg = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLA) & 0x3f;
-       iface_breg = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLB) & 0x3f;
+       iface_areg = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLA) & 0x3f;
+       iface_breg = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLB) & 0x3f;
 
        /* set master/slave audio interface */
        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1407,8 +1407,8 @@ static int aic3x_set_power(struct snd_soc_component *component, int power)
                 * writing one of them and thus caused other one also not
                 * being written
                 */
-               pll_c = snd_soc_component_read32(component, AIC3X_PLL_PROGC_REG);
-               pll_d = snd_soc_component_read32(component, AIC3X_PLL_PROGD_REG);
+               pll_c = snd_soc_component_read(component, AIC3X_PLL_PROGC_REG);
+               pll_d = snd_soc_component_read(component, AIC3X_PLL_PROGD_REG);
                if (pll_c == aic3x_reg[AIC3X_PLL_PROGC_REG].def ||
                        pll_d == aic3x_reg[AIC3X_PLL_PROGD_REG].def) {
                        snd_soc_component_write(component, AIC3X_PLL_PROGC_REG, pll_c);