F: drivers/i2c/busses/i2c-omap.c
F: include/linux/i2c-omap.h
+OMAP DEVICE TREE SUPPORT
+M: Benoît Cousson <b-cousson@ti.com>
+M: Tony Lindgren <tony@atomide.com>
+L: linux-omap@vger.kernel.org
+L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/boot/dts/*omap*
+F: arch/arm/boot/dts/*am3*
+
OMAP CLOCK FRAMEWORK SUPPORT
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# Common support
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
- serial.o devices.o dma.o
+ serial.o devices.o dma.o fb.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
--- /dev/null
+/*
+ * File: arch/arm/plat-omap/fb.c
+ *
+ * Framebuffer device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <linux/omapfb.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach/map.h>
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static bool omapfb_lcd_configured;
+static struct omapfb_platform_data omapfb_config;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+ .name = "omapfb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &omap_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &omapfb_config,
+ },
+ .num_resources = 0,
+};
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+ omapfb_config.lcd = *config;
+ omapfb_lcd_configured = true;
+}
+
+static int __init omap_init_fb(void)
+{
+ /*
+ * If the board file has not set the lcd config with
+ * omapfb_set_lcd_config(), don't bother registering the omapfb device
+ */
+ if (!omapfb_lcd_configured)
+ return 0;
+
+ return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
+
+#else
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+}
+
+#endif
#
# Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o sram.o
#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
-/* 34xx GENERAL_WKUP regist offsets */
+/* 34xx GENERAL_WKUP register offsets */
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
- if (!freqsel)
- WARN_ON(1);
+ WARN_ON(!freqsel);
}
pr_debug("%s: %s: set rate: locking rate to %lu.\n",
#include "omap_device.h"
#include "omap_hwmod.h"
-#include <plat/cpu.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "dss-common.h"
#include "mux.h"
/*
- * File: arch/arm/plat-omap/fb.c
- *
* Framebuffer device registration for TI OMAP platforms
*
* Copyright (C) 2006 Nokia Corporation
#include <asm/mach/map.h>
-#include <plat/cpu.h>
+#include "soc.h"
#ifdef CONFIG_OMAP2_VRFB
arch_initcall(omap_init_vrfb);
#endif
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
-
-static bool omapfb_lcd_configured;
-static struct omapfb_platform_data omapfb_config;
-
-static u64 omap_fb_dma_mask = ~(u32)0;
-
-static struct platform_device omap_fb_device = {
- .name = "omapfb",
- .id = -1,
- .dev = {
- .dma_mask = &omap_fb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &omapfb_config,
- },
- .num_resources = 0,
-};
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
- omapfb_config.lcd = *config;
- omapfb_lcd_configured = true;
-}
-
-static int __init omap_init_fb(void)
-{
- /*
- * If the board file has not set the lcd config with
- * omapfb_set_lcd_config(), don't bother registering the omapfb device
- */
- if (!omapfb_lcd_configured)
- return 0;
-
- return platform_device_register(&omap_fb_device);
-}
-
-arch_initcall(omap_init_fb);
-
-#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static u64 omap_fb_dma_mask = ~(u32)0;
static struct omapfb_platform_data omapfb_config;
arch_initcall(omap_init_fb);
-#else
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-}
-
#endif
#include <linux/omap-dma.h>
-#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/iommu-omap.h>
if (twl_sr_enable_autoinit)
pr_warning("%s: unexpected multiple calls\n", __func__);
- ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
- TWL4030_DCDC_GLOBAL_CFG);
+ ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
+ TWL4030_DCDC_GLOBAL_CFG);
if (ret)
goto err;
else
temp &= ~SMARTREFLEX_ENABLE;
- ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
- TWL4030_DCDC_GLOBAL_CFG);
+ ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
+ TWL4030_DCDC_GLOBAL_CFG);
if (!ret) {
twl_sr_enable_autoinit = true;
return 0;
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/pm_runtime.h>
-
#include <asm/pmu.h>
#include "soc.h"
#include <linux/io.h>
#include <linux/irq.h>
+#include "soc.h"
#include "common.h"
-#include <plat/cpu.h>
-
#include "vp.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <linux/io.h>
#include <linux/irq.h>
+#include "soc.h"
#include "common.h"
-#include <plat/cpu.h>
-
#include "vp.h"
#include "powerdomain.h"
#include "prm3xxx.h"
#
# Common support
-obj-y := sram.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
},
};
-static int __init omap_dm_timer_driver_init(void)
-{
- return platform_driver_register(&omap_dm_timer_driver);
-}
-
-static void __exit omap_dm_timer_driver_exit(void)
-{
- platform_driver_unregister(&omap_dm_timer_driver);
-}
-
early_platform_init("earlytimer", &omap_dm_timer_driver);
-module_init(omap_dm_timer_driver_init);
-module_exit(omap_dm_timer_driver_exit);
+module_platform_driver(omap_dm_timer_driver);
MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
MODULE_LICENSE("GPL");
#include <mach/soc.h>
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#include "../../mach-omap2/soc.h"
-#endif
-
#endif
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
-#include <plat/cpu.h>
-
#include "isp.h"
#include "ispreg.h"
#include "ispccdc.h"
#include <linux/pm_runtime.h>
#include <linux/power/smartreflex.h>
-#include <plat/cpu.h>
-
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
git.samba.org / sfrench / cifs-2.6.git / commitdiff