arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845

The redistributable firmware should work on any engineering device, so
lets push this to qcom/sdm845, rather than qcom/db845c. Also specify the
path for the modem firmware.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191113203951.3704428-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 912ba745c0fc9032d632550f92792ff04a6546a3..3c6f94fd8be05170a827ff2cb6721f733c290c88 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
 &adsp_pas {
        status = "okay";
 
-       firmware-name = "qcom/db845c/adsp.mdt";
+       firmware-name = "qcom/sdm845/adsp.mdt";
 };
 
 &apps_rsc {
@@ -343,7 +343,7 @@
 
 &cdsp_pas {
        status = "okay";
-       firmware-name = "qcom/db845c/cdsp.mdt";
+       firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
 &gcc {
@@ -352,6 +352,11 @@
                           <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&mss_pil {
+       status = "okay";
+       firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
 &pm8998_gpio {
        vol_up_pin_a: vol-up-active {
                pins = "gpio6";