drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport

Move PARIDE protocol modules out of drivers/block into
drivers/ata/pata_parport and update the CONFIG_ symbol names to
PATA_PARPORT.

[Damien]
The pata_parport driver file itsef is also moved together with the
protocol modules in drivers/ata/pata_parport.

Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

diff --git a/drivers/Makefile b/drivers/Makefile
index f1365608bc8c39d3205c4a1feb439b777291152b..788e37269ee9d0d449b21057bf3c29d694ae6302 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_DIO)             += dio/
 obj-$(CONFIG_SBUS)             += sbus/
 obj-$(CONFIG_ZORRO)            += zorro/
 obj-$(CONFIG_ATA_OVER_ETH)     += block/aoe/
-obj-y                          += block/paride/
 obj-$(CONFIG_TC)               += tc/
 obj-$(CONFIG_USB_PHY)          += usb/
 obj-$(CONFIG_USB)              += usb/

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a5a31ba34bd3f920f6bca346b0967f1ac2f6c8d6..2fa9e66ba824b74722741320b355695a55d84a58 100644 (file)
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1174,7 +1174,7 @@ config PATA_PARPORT
          Read <file:Documentation/admin-guide/blockdev/paride.rst> for more
          information.
 
-         Use the old PARIDE protocol modules.
+source "drivers/ata/pata_parport/Kconfig"
 
 comment "Generic fallback / legacy drivers"
 

diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 23588738cff0bd8e4e27fb0008eed98fa09f6e76..d846159123875a02dc6c51e3be0ab919b892a36a 100644 (file)
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -114,7 +114,7 @@ obj-$(CONFIG_PATA_SAMSUNG_CF)       += pata_samsung_cf.o
 
 obj-$(CONFIG_PATA_PXA)         += pata_pxa.o
 
-obj-$(CONFIG_PATA_PARPORT)     += pata_parport.o
+obj-$(CONFIG_PATA_PARPORT)     += pata_parport/
 
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)                += pata_acpi.o

diff --git a/drivers/ata/pata_parport/Kconfig b/drivers/ata/pata_parport/Kconfig
new file mode 100644 (file)
index 0000000..0893a13
--- /dev/null
+++ b/drivers/ata/pata_parport/Kconfig
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+
+comment "Parallel IDE protocol modules"
+       depends on PATA_PARPORT
+
+config PATA_PARPORT_ATEN
+       tristate "ATEN EH-100 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the ATEN EH-100 parallel port IDE
+         protocol. This protocol is used in some inexpensive low performance
+         parallel port kits made in Hong Kong.
+
+config PATA_PARPORT_BPCK
+       tristate "MicroSolutions backpack (Series 5) protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the Micro Solutions BACKPACK
+         parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
+         before 1999 were Series 5) Series 5 drives will NOT always have the
+         Series noted on the bottom of the drive. Series 6 drivers will.
+
+         In other words, if your BACKPACK drive doesn't say "Series 6" on the
+         bottom, enable this option.
+
+config PATA_PARPORT_BPCK6
+       tristate "MicroSolutions backpack (Series 6) protocol"
+       depends on (PATA_PARPORT) && !64BIT
+       help
+         This option enables support for the Micro Solutions BACKPACK
+         parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
+         after 1999 were Series 6) Series 6 drives will have the Series noted
+         on the bottom of the drive.  Series 5 drivers don't always have it
+         noted.
+
+         In other words, if your BACKPACK drive says "Series 6" on the
+         bottom, enable this option.
+
+config PATA_PARPORT_COMM
+       tristate "DataStor Commuter protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the Commuter parallel port IDE
+         protocol from DataStor.
+
+config PATA_PARPORT_DSTR
+       tristate "DataStor EP-2000 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the EP-2000 parallel port IDE
+         protocol from DataStor
+
+config PATA_PARPORT_FIT2
+       tristate "FIT TD-2000 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the TD-2000 parallel port IDE
+         protocol from Fidelity International Technology. This is a simple
+         (low speed) adapter that is used in some portable hard drives.
+
+config PATA_PARPORT_FIT3
+       tristate "FIT TD-3000 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the TD-3000 parallel port IDE
+         protocol from Fidelity International Technology. This protocol is
+         used in newer models of their portable disk, CD-ROM and PD/CD
+         devices.
+
+config PATA_PARPORT_EPAT
+       tristate "Shuttle EPAT/EPEZ protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the EPAT parallel port IDE protocol.
+         EPAT is a parallel port IDE adapter manufactured by Shuttle
+         Technology and widely used in devices from major vendors such as
+         Hewlett-Packard, SyQuest, Imation and Avatar.
+
+config PATA_PARPORT_EPATC8
+       bool "Support c7/c8 chips"
+       depends on PATA_PARPORT_EPAT
+       help
+         This option enables support for the newer Shuttle EP1284 (aka c7 and
+         c8) chip. You need this if you are using any recent Imation SuperDisk
+         (LS-120) drive.
+
+config PATA_PARPORT_EPIA
+       tristate "Shuttle EPIA protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the (obsolete) EPIA parallel port
+         IDE protocol from Shuttle Technology. This adapter can still be
+         found in some no-name kits.
+
+config PATA_PARPORT_FRIQ
+       tristate "Freecom IQ ASIC-2 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for version 2 of the Freecom IQ parallel
+         port IDE adapter.  This adapter is used by the Maxell Superdisk
+         drive.
+
+config PATA_PARPORT_FRPW
+       tristate "FreeCom power protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the Freecom power parallel port IDE
+         protocol.
+
+config PATA_PARPORT_KBIC
+       tristate "KingByte KBIC-951A/971A protocols"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the KBIC-951A and KBIC-971A parallel
+         port IDE protocols from KingByte Information Corp. KingByte's
+         adapters appear in many no-name portable disk and CD-ROM products,
+         especially in Europe.
+
+config PATA_PARPORT_KTTI
+       tristate "KT PHd protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the "PHd" parallel port IDE protocol
+         from KT Technology. This is a simple (low speed) adapter that is
+         used in some 2.5" portable hard drives.
+
+config PATA_PARPORT_ON20
+       tristate "OnSpec 90c20 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the (obsolete) 90c20 parallel port
+         IDE protocol from OnSpec (often marketed under the ValuStore brand
+         name).
+
+config PATA_PARPORT_ON26
+       tristate "OnSpec 90c26 protocol"
+       depends on PATA_PARPORT
+       help
+         This option enables support for the 90c26 parallel port IDE protocol
+         from OnSpec Electronics (often marketed under the ValuStore brand
+         name).

diff --git a/drivers/ata/pata_parport/Makefile b/drivers/ata/pata_parport/Makefile
new file mode 100644 (file)
index 0000000..0932c8d
--- /dev/null
+++ b/drivers/ata/pata_parport/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PATA_PARPORT)      += pata_parport.o
+
+obj-$(CONFIG_PATA_PARPORT_ATEN)        += aten.o
+obj-$(CONFIG_PATA_PARPORT_BPCK)        += bpck.o
+obj-$(CONFIG_PATA_PARPORT_COMM)        += comm.o
+obj-$(CONFIG_PATA_PARPORT_DSTR)        += dstr.o
+obj-$(CONFIG_PATA_PARPORT_KBIC)        += kbic.o
+obj-$(CONFIG_PATA_PARPORT_EPAT)        += epat.o
+obj-$(CONFIG_PATA_PARPORT_EPIA)        += epia.o
+obj-$(CONFIG_PATA_PARPORT_FRPW)        += frpw.o
+obj-$(CONFIG_PATA_PARPORT_FRIQ)        += friq.o
+obj-$(CONFIG_PATA_PARPORT_FIT2)        += fit2.o
+obj-$(CONFIG_PATA_PARPORT_FIT3)        += fit3.o
+obj-$(CONFIG_PATA_PARPORT_ON20)        += on20.o
+obj-$(CONFIG_PATA_PARPORT_ON26)        += on26.o
+obj-$(CONFIG_PATA_PARPORT_KTTI)        += ktti.o
+obj-$(CONFIG_PATA_PARPORT_BPCK6) += bpck6.o

diff --git a/drivers/block/paride/aten.c b/drivers/ata/pata_parport/aten.c
similarity index 100%
rename from drivers/block/paride/aten.c
rename to drivers/ata/pata_parport/aten.c

diff --git a/drivers/block/paride/bpck.c b/drivers/ata/pata_parport/bpck.c
similarity index 100%
rename from drivers/block/paride/bpck.c
rename to drivers/ata/pata_parport/bpck.c

diff --git a/drivers/block/paride/bpck6.c b/drivers/ata/pata_parport/bpck6.c
similarity index 100%
rename from drivers/block/paride/bpck6.c
rename to drivers/ata/pata_parport/bpck6.c

diff --git a/drivers/block/paride/comm.c b/drivers/ata/pata_parport/comm.c
similarity index 100%
rename from drivers/block/paride/comm.c
rename to drivers/ata/pata_parport/comm.c

diff --git a/drivers/block/paride/dstr.c b/drivers/ata/pata_parport/dstr.c
similarity index 100%
rename from drivers/block/paride/dstr.c
rename to drivers/ata/pata_parport/dstr.c

diff --git a/drivers/block/paride/epat.c b/drivers/ata/pata_parport/epat.c
similarity index 100%
rename from drivers/block/paride/epat.c
rename to drivers/ata/pata_parport/epat.c

diff --git a/drivers/block/paride/epia.c b/drivers/ata/pata_parport/epia.c
similarity index 100%
rename from drivers/block/paride/epia.c
rename to drivers/ata/pata_parport/epia.c

diff --git a/drivers/block/paride/fit2.c b/drivers/ata/pata_parport/fit2.c
similarity index 100%
rename from drivers/block/paride/fit2.c
rename to drivers/ata/pata_parport/fit2.c

diff --git a/drivers/block/paride/fit3.c b/drivers/ata/pata_parport/fit3.c
similarity index 100%
rename from drivers/block/paride/fit3.c
rename to drivers/ata/pata_parport/fit3.c

diff --git a/drivers/block/paride/friq.c b/drivers/ata/pata_parport/friq.c
similarity index 100%
rename from drivers/block/paride/friq.c
rename to drivers/ata/pata_parport/friq.c

diff --git a/drivers/block/paride/frpw.c b/drivers/ata/pata_parport/frpw.c
similarity index 100%
rename from drivers/block/paride/frpw.c
rename to drivers/ata/pata_parport/frpw.c

diff --git a/drivers/block/paride/kbic.c b/drivers/ata/pata_parport/kbic.c
similarity index 100%
rename from drivers/block/paride/kbic.c
rename to drivers/ata/pata_parport/kbic.c

diff --git a/drivers/block/paride/ktti.c b/drivers/ata/pata_parport/ktti.c
similarity index 100%
rename from drivers/block/paride/ktti.c
rename to drivers/ata/pata_parport/ktti.c

diff --git a/drivers/block/paride/on20.c b/drivers/ata/pata_parport/on20.c
similarity index 100%
rename from drivers/block/paride/on20.c
rename to drivers/ata/pata_parport/on20.c

diff --git a/drivers/block/paride/on26.c b/drivers/ata/pata_parport/on26.c
similarity index 100%
rename from drivers/block/paride/on26.c
rename to drivers/ata/pata_parport/on26.c

diff --git a/drivers/ata/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
similarity index 100%
rename from drivers/ata/pata_parport.c
rename to drivers/ata/pata_parport/pata_parport.c

diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/ata/pata_parport/ppc6lnx.c
similarity index 100%
rename from drivers/block/paride/ppc6lnx.c
rename to drivers/ata/pata_parport/ppc6lnx.c

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 71c9c6e3c07ae7f72adf999546df3fb00c4424f2..89d5cca82f006145dd73393f2f7a94f9a5307081 100644 (file)
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -103,8 +103,6 @@ config GDROM
          Most users will want to say "Y" here.
          You can also build this as a module which will be called gdrom.
 
-source "drivers/block/paride/Kconfig"
-
 source "drivers/block/mtip32xx/Kconfig"
 
 source "drivers/block/zram/Kconfig"

diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
deleted file mode 100644 (file)
index 19310be..0000000
--- a/drivers/block/paride/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# PARIDE configuration
-
-comment "Parallel IDE protocol modules"
-       depends on PATA_PARPORT
-
-config PARIDE_ATEN
-       tristate "ATEN EH-100 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the ATEN EH-100 parallel port IDE
-         protocol. This protocol is used in some inexpensive low performance
-         parallel port kits made in Hong Kong. If you chose to build PARIDE
-         support into your kernel, you may answer Y here to build in the
-         protocol driver, otherwise you should answer M to build it as a
-         loadable module. The module will be called aten. You must also
-         have a high-level driver for the type of device that you want to
-         support.
-
-config PARIDE_BPCK
-       tristate "MicroSolutions backpack (Series 5) protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the Micro Solutions BACKPACK
-         parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
-         before 1999 were Series 5) Series 5 drives will NOT always have the
-         Series noted on the bottom of the drive. Series 6 drivers will.
-
-         In other words, if your BACKPACK drive doesn't say "Series 6" on the
-         bottom, enable this option.
-
-         If you chose to build PARIDE support into your kernel, you may
-         answer Y here to build in the protocol driver, otherwise you should
-         answer M to build it as a loadable module.  The module will be
-         called bpck.  You must also have a high-level driver for the type
-         of device that you want to support.
-
-config PARIDE_BPCK6
-       tristate "MicroSolutions backpack (Series 6) protocol"
-       depends on (PATA_PARPORT) && !64BIT
-       help
-         This option enables support for the Micro Solutions BACKPACK
-         parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
-         after 1999 were Series 6) Series 6 drives will have the Series noted
-         on the bottom of the drive.  Series 5 drivers don't always have it
-         noted.
-
-         In other words, if your BACKPACK drive says "Series 6" on the
-         bottom, enable this option.
-
-         If you chose to build PARIDE support into your kernel, you may
-         answer Y here to build in the protocol driver, otherwise you should
-         answer M to build it as a loadable module.  The module will be
-         called bpck6.  You must also have a high-level driver for the type
-         of device that you want to support.
-
-config PARIDE_COMM
-       tristate "DataStor Commuter protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the Commuter parallel port IDE
-         protocol from DataStor. If you chose to build PARIDE support
-         into your kernel, you may answer Y here to build in the protocol
-         driver, otherwise you should answer M to build it as a loadable
-         module. The module will be called comm. You must also have
-         a high-level driver for the type of device that you want to support.
-
-config PARIDE_DSTR
-       tristate "DataStor EP-2000 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the EP-2000 parallel port IDE
-         protocol from DataStor. If you chose to build PARIDE support
-         into your kernel, you may answer Y here to build in the protocol
-         driver, otherwise you should answer M to build it as a loadable
-         module. The module will be called dstr. You must also have
-         a high-level driver for the type of device that you want to support.
-
-config PARIDE_FIT2
-       tristate "FIT TD-2000 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the TD-2000 parallel port IDE
-         protocol from Fidelity International Technology. This is a simple
-         (low speed) adapter that is used in some portable hard drives. If
-         you chose to build PARIDE support into your kernel, you may answer Y
-         here to build in the protocol driver, otherwise you should answer M
-         to build it as a loadable module. The module will be called ktti.
-         You must also have a high-level driver for the type of device that
-         you want to support.
-
-config PARIDE_FIT3
-       tristate "FIT TD-3000 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the TD-3000 parallel port IDE
-         protocol from Fidelity International Technology. This protocol is
-         used in newer models of their portable disk, CD-ROM and PD/CD
-         devices. If you chose to build PARIDE support into your kernel, you
-         may answer Y here to build in the protocol driver, otherwise you
-         should answer M to build it as a loadable module. The module will be
-         called fit3. You must also have a high-level driver for the type
-         of device that you want to support.
-
-config PARIDE_EPAT
-       tristate "Shuttle EPAT/EPEZ protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the EPAT parallel port IDE protocol.
-         EPAT is a parallel port IDE adapter manufactured by Shuttle
-         Technology and widely used in devices from major vendors such as
-         Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
-         PARIDE support into your kernel, you may answer Y here to build in
-         the protocol driver, otherwise you should answer M to build it as a
-         loadable module. The module will be called epat. You must also
-         have a high-level driver for the type of device that you want to
-         support.
-
-config PARIDE_EPATC8
-       bool "Support c7/c8 chips"
-       depends on PARIDE_EPAT
-       help
-         This option enables support for the newer Shuttle EP1284 (aka c7 and
-         c8) chip. You need this if you are using any recent Imation SuperDisk
-         (LS-120) drive.
-
-config PARIDE_EPIA
-       tristate "Shuttle EPIA protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the (obsolete) EPIA parallel port
-         IDE protocol from Shuttle Technology. This adapter can still be
-         found in some no-name kits. If you chose to build PARIDE support
-         into your kernel, you may answer Y here to build in the protocol
-         driver, otherwise you should answer M to build it as a loadable
-         module. The module will be called epia. You must also have a
-         high-level driver for the type of device that you want to support.
-
-config PARIDE_FRIQ
-       tristate "Freecom IQ ASIC-2 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for version 2 of the Freecom IQ parallel
-         port IDE adapter.  This adapter is used by the Maxell Superdisk
-         drive.  If you chose to build PARIDE support into your kernel, you
-         may answer Y here to build in the protocol driver, otherwise you
-         should answer M to build it as a loadable module. The module will be
-         called friq. You must also have a high-level driver for the type
-         of device that you want to support.
-
-config PARIDE_FRPW
-       tristate "FreeCom power protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the Freecom power parallel port IDE
-         protocol. If you chose to build PARIDE support into your kernel, you
-         may answer Y here to build in the protocol driver, otherwise you
-         should answer M to build it as a loadable module. The module will be
-         called frpw. You must also have a high-level driver for the type
-         of device that you want to support.
-
-config PARIDE_KBIC
-       tristate "KingByte KBIC-951A/971A protocols"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the KBIC-951A and KBIC-971A parallel
-         port IDE protocols from KingByte Information Corp. KingByte's
-         adapters appear in many no-name portable disk and CD-ROM products,
-         especially in Europe. If you chose to build PARIDE support into your
-         kernel, you may answer Y here to build in the protocol driver,
-         otherwise you should answer M to build it as a loadable module. The
-         module will be called kbic. You must also have a high-level driver
-         for the type of device that you want to support.
-
-config PARIDE_KTTI
-       tristate "KT PHd protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the "PHd" parallel port IDE protocol
-         from KT Technology. This is a simple (low speed) adapter that is
-         used in some 2.5" portable hard drives. If you chose to build PARIDE
-         support into your kernel, you may answer Y here to build in the
-         protocol driver, otherwise you should answer M to build it as a
-         loadable module. The module will be called ktti. You must also
-         have a high-level driver for the type of device that you want to
-         support.
-
-config PARIDE_ON20
-       tristate "OnSpec 90c20 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the (obsolete) 90c20 parallel port
-         IDE protocol from OnSpec (often marketed under the ValuStore brand
-         name). If you chose to build PARIDE support into your kernel, you
-         may answer Y here to build in the protocol driver, otherwise you
-         should answer M to build it as a loadable module. The module will
-         be called on20. You must also have a high-level driver for the
-         type of device that you want to support.
-
-config PARIDE_ON26
-       tristate "OnSpec 90c26 protocol"
-       depends on PATA_PARPORT
-       help
-         This option enables support for the 90c26 parallel port IDE protocol
-         from OnSpec Electronics (often marketed under the ValuStore brand
-         name). If you chose to build PARIDE support into your kernel, you
-         may answer Y here to build in the protocol driver, otherwise you
-         should answer M to build it as a loadable module. The module will be
-         called on26. You must also have a high-level driver for the type
-         of device that you want to support.
-
-#

diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile
deleted file mode 100644 (file)
index cdf54a2..0000000
--- a/drivers/block/paride/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for Parallel port IDE device drivers.
-#
-# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-$(CONFIG_PARIDE_ATEN)      += aten.o
-obj-$(CONFIG_PARIDE_BPCK)      += bpck.o
-obj-$(CONFIG_PARIDE_COMM)      += comm.o
-obj-$(CONFIG_PARIDE_DSTR)      += dstr.o
-obj-$(CONFIG_PARIDE_KBIC)      += kbic.o
-obj-$(CONFIG_PARIDE_EPAT)      += epat.o
-obj-$(CONFIG_PARIDE_EPIA)      += epia.o
-obj-$(CONFIG_PARIDE_FRPW)      += frpw.o
-obj-$(CONFIG_PARIDE_FRIQ)      += friq.o
-obj-$(CONFIG_PARIDE_FIT2)      += fit2.o
-obj-$(CONFIG_PARIDE_FIT3)      += fit3.o
-obj-$(CONFIG_PARIDE_ON20)      += on20.o
-obj-$(CONFIG_PARIDE_ON26)      += on26.o
-obj-$(CONFIG_PARIDE_KTTI)      += ktti.o
-obj-$(CONFIG_PARIDE_BPCK6)     += bpck6.o