net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()

Read the hardware configuration to determine which port is attached
to the serdes.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h
index f3e27573a3864d124d4c7757e2b9445946e512ac..807aeaad983007d5dee4dcc837e7420f25b854b8 100644 (file)
--- a/drivers/net/dsa/mv88e6xxx/global2.h
+++ b/drivers/net/dsa/mv88e6xxx/global2.h
@@ -299,6 +299,8 @@
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA1_NO_CPU       BIT(2)
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA2      0x72
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA2_P0_MODE_MASK 0x3
+#define MV88E6352_G2_SCRATCH_CONFIG_DATA3      0x73
+#define MV88E6352_G2_SCRATCH_CONFIG_DATA3_S_SEL                BIT(1)
 
 #define MV88E6352_G2_SCRATCH_GPIO_PCTL_GPIO    0
 #define MV88E6352_G2_SCRATCH_GPIO_PCTL_TRIG    1
@@ -370,6 +372,7 @@ extern const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops;
 
 int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip,
                                      bool external);
+int mv88e6352_g2_scratch_port_has_serdes(struct mv88e6xxx_chip *chip, int port);
 int mv88e6xxx_g2_atu_stats_set(struct mv88e6xxx_chip *chip, u16 kind, u16 bin);
 int mv88e6xxx_g2_atu_stats_get(struct mv88e6xxx_chip *chip, u16 *stats);
 

diff --git a/drivers/net/dsa/mv88e6xxx/global2_scratch.c b/drivers/net/dsa/mv88e6xxx/global2_scratch.c
index eda710062933453f34cfb66dcaf01bd58eabc9bd..a9d6e40321a2b45580853685bc9b1021f3d4c119 100644 (file)
--- a/drivers/net/dsa/mv88e6xxx/global2_scratch.c
+++ b/drivers/net/dsa/mv88e6xxx/global2_scratch.c
@@ -289,3 +289,31 @@ int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip,
 
        return mv88e6xxx_g2_scratch_write(chip, misc_cfg, val);
 }
+
+/**
+ * mv88e6352_g2_scratch_port_has_serdes - indicate if a port can have a serdes
+ * @chip: chip private data
+ * @port: port number to check for serdes
+ *
+ * Indicates whether the port may have a serdes attached according to the
+ * pin strapping. Returns negative error number, 0 if the port is not
+ * configured to have a serdes, and 1 if the port is configured to have a
+ * serdes attached.
+ */
+int mv88e6352_g2_scratch_port_has_serdes(struct mv88e6xxx_chip *chip, int port)
+{
+       u8 config3, p;
+       int err;
+
+       err = mv88e6xxx_g2_scratch_read(chip, MV88E6352_G2_SCRATCH_CONFIG_DATA3,
+                                       &config3);
+       if (err)
+               return err;
+
+       if (config3 & MV88E6352_G2_SCRATCH_CONFIG_DATA3_S_SEL)
+               p = 5;
+       else
+               p = 4;
+
+       return port == p;
+}