* FE_DISHNETWORK_SEND_LEGACY_CMD ioctl (only Satellite).
* Drivers should not use this, except when the DVB
* core emulation fails to provide proper support (e.g.
- * if set_voltage() takes more than 8ms to work), and
+ * if @set_voltage takes more than 8ms to work), and
* when backward compatibility with this legacy API is
* required.
* @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C
* This function prepares a Digital TV frontend to suspend.
*
* In order to prepare the tuner to suspend, if
- * &dvb_frontend_ops.tuner_ops.suspend() is available, it calls it. Otherwise,
- * it will call &dvb_frontend_ops.tuner_ops.sleep(), if available.
+ * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise,
+ * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available.
*
- * It will also call &dvb_frontend_ops.sleep() to put the demod to suspend.
+ * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend.
*
- * The drivers should also call dvb_frontend_suspend() as part of their
- * handler for the &device_driver.suspend().
+ * The drivers should also call dvb_frontend_suspend\(\) as part of their
+ * handler for the &device_driver.suspend\(\).
*/
int dvb_frontend_suspend(struct dvb_frontend *fe);
*
* This function resumes the usual operation of the tuner after resume.
*
- * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init().
+ * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\).
*
- * If &dvb_frontend_ops.tuner_ops.resume() is available, It, it calls it.
- * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init(), if available.
+ * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it.
+ * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available.
*
* Once tuner and demods are resumed, it will enforce that the SEC voltage and
* tone are restored to their previous values and wake up the frontend's
* kthread in order to retune the frontend.
*
* The drivers should also call dvb_frontend_resume() as part of their
- * handler for the &device_driver.resume().
+ * handler for the &device_driver.resume\(\).
*/
int dvb_frontend_resume(struct dvb_frontend *fe);
*
* @fe: pointer to the frontend struct
*
- * Calls &dvb_frontend_ops.init() and &dvb_frontend_ops.tuner_ops.init(),
+ * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\),
* and resets SEC tone and voltage (for Satellite systems).
*
* NOTE: Currently, this function is used only by one driver (budget-av).
* satellite subsystem.
*
* Its used internally by the DVB frontend core, in order to emulate
- * %FE_DISHNETWORK_SEND_LEGACY_CMD using the &dvb_frontend_ops.set_voltage()
+ * %FE_DISHNETWORK_SEND_LEGACY_CMD using the &dvb_frontend_ops.set_voltage\(\)
* callback.
*
* NOTE: it should not be used at the drivers, as the emulation for the
* legacy callback is provided by the Kernel. The only situation where this
* should be at the drivers is when there are some bugs at the hardware that
* would prevent the core emulation to work. On such cases, the driver would
- * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command() and
+ * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and
* calling this function directly.
*/
void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec);
/**
* struct vb2_ops - driver-specific callbacks
*
- * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ * @queue_setup: called from %VIDIOC_REQBUFS and %VIDIOC_CREATE_BUFS
* handlers before memory allocation. It can be called
* twice: if the original number of requested buffers
* could not be allocated, then it will be called a
* The driver should return the required number of buffers
* in \*num_buffers, the required number of planes per
* buffer in \*num_planes, the size of each plane should be
- * set in the sizes[] array and optional per-plane
- * allocator specific device in the alloc_devs[] array.
- * When called from VIDIOC_REQBUFS, *num_planes == 0, the
+ * set in the sizes\[\] array and optional per-plane
+ * allocator specific device in the alloc_devs\[\] array.
+ * When called from %VIDIOC_REQBUFS, \*num_planes == 0, the
* driver has to use the currently configured format to
* determine the plane sizes and \*num_buffers is the total
* number of buffers that are being allocated. When called
- * from VIDIOC_CREATE_BUFS, \*num_planes != 0 and it
- * describes the requested number of planes and sizes[]
+ * from %VIDIOC_CREATE_BUFS, \*num_planes != 0 and it
+ * describes the requested number of planes and sizes\[\]
* contains the requested plane sizes. If either
* \*num_planes or the requested sizes are invalid callback
- * must return -EINVAL. In this case \*num_buffers are
+ * must return %-EINVAL. In this case \*num_buffers are
* being allocated additionally to q->num_buffers.
* @wait_prepare: release any locks taken while calling vb2 functions;
* it is called before an ioctl needs to wait for a new
* initialization failure (return != 0) will prevent
* queue setup from completing successfully; optional.
* @buf_prepare: called every time the buffer is queued from userspace
- * and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ * and from the %VIDIOC_PREPARE_BUF ioctl; drivers may
* perform any initialization required before each
* hardware operation in this callback; drivers can
* access/modify the buffer here as it is still synced for
- * the CPU; drivers that support VIDIOC_CREATE_BUFS must
+ * the CPU; drivers that support %VIDIOC_CREATE_BUFS must
* also validate the buffer size; if an error is returned,
* the buffer will not be queued in driver; optional.
* @buf_finish: called before every dequeue of the buffer back to
* can access/modify the buffer contents; drivers may
* perform any operations required before userspace
* accesses the buffer; optional. The buffer state can be
- * one of the following: DONE and ERROR occur while
- * streaming is in progress, and the PREPARED state occurs
+ * one of the following: %DONE and %ERROR occur while
+ * streaming is in progress, and the %PREPARED state occurs
* when the queue has been canceled and all pending
- * buffers are being returned to their default DEQUEUED
+ * buffers are being returned to their default %DEQUEUED
* state. Typically you only have to do something if the
- * state is VB2_BUF_STATE_DONE, since in all other cases
+ * state is %VB2_BUF_STATE_DONE, since in all other cases
* the buffer contents will be ignored anyway.
* @buf_cleanup: called once before the buffer is freed; drivers may
* perform any additional cleanup; optional.
* @start_streaming: called once to enter 'streaming' state; the driver may
- * receive buffers with @buf_queue callback before
- * @start_streaming is called; the driver gets the number
- * of already queued buffers in count parameter; driver
- * can return an error if hardware fails, in that case all
- * buffers that have been already given by the @buf_queue
- * callback are to be returned by the driver by calling
- * @vb2_buffer_done(VB2_BUF_STATE_QUEUED).
+ * receive buffers with @buf_queue callback
+ * before @start_streaming is called; the driver gets the
+ * number of already queued buffers in count parameter;
+ * driver can return an error if hardware fails, in that
+ * case all buffers that have been already given by
+ * the @buf_queue callback are to be returned by the driver
+ * by calling @vb2_buffer_done\(%VB2_BUF_STATE_QUEUED\).
* If you need a minimum number of buffers before you can
* start streaming, then set @min_buffers_needed in the
* vb2_queue structure. If that is non-zero then
* many buffers have been queued up by userspace.
* @stop_streaming: called when 'streaming' state must be disabled; driver
* should stop any DMA transactions or wait until they
- * finish and give back all buffers it got from buf_queue()
- * callback by calling @vb2_buffer_done() with either
- * VB2_BUF_STATE_DONE or VB2_BUF_STATE_ERROR; may use
+ * finish and give back all buffers it got from &buf_queue
+ * callback by calling @vb2_buffer_done\(\) with either
+ * %VB2_BUF_STATE_DONE or %VB2_BUF_STATE_ERROR; may use
* vb2_wait_for_all_buffers() function
* @buf_queue: passes buffer vb to the driver; driver may start
* hardware operation on this buffer; driver should give
* the buffer back by calling vb2_buffer_done() function;
- * it is allways called after calling STREAMON ioctl;
+ * it is allways called after calling %VIDIOC_STREAMON ioctl;
* might be called before start_streaming callback if user
- * pre-queued buffers before calling STREAMON.
+ * pre-queued buffers before calling %VIDIOC_STREAMON.
*/
struct vb2_ops {
int (*queue_setup)(struct vb2_queue *q,
git.samba.org / sfrench / cifs-2.6.git / commitdiff