:c:type:`struct ata_port_operations <ata_port_operations>`
----------------------------------------------------------
-Disable ATA port
-~~~~~~~~~~~~~~~~
-
-::
-
- void (*port_disable) (struct ata_port *);
-
-
-Called from :c:func:`ata_bus_probe` error path, as well as when unregistering
-from the SCSI module (rmmod, hot unplug). This function should do
-whatever needs to be done to take the port out of use. In most cases,
-:c:func:`ata_port_disable` can be used as this hook.
-
-Called from :c:func:`ata_bus_probe` on a failed probe. Called from
-:c:func:`ata_scsi_release`.
-
Post-IDENTIFY device configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Exception and probe handling (EH)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-::
-
- void (*eng_timeout) (struct ata_port *ap);
- void (*phy_reset) (struct ata_port *ap);
-
-
-Deprecated. Use ``->error_handler()`` instead.
-
::
void (*freeze) (struct ata_port *ap);
u32 val);
-Read and write standard SATA phy registers. Currently only used if
-``->phy_reset`` hook called the :c:func:`sata_phy_reset` helper function.
+Read and write standard SATA phy registers.
sc_reg is one of SCR_STATUS, SCR_CONTROL, SCR_ERROR, or SCR_ACTIVE.
Init and shutdown
:c:func:`ata_scsi_error` is the current ``transportt->eh_strategy_handler()``
for libata. As discussed above, this will be entered in two cases -
-timeout and ATAPI error completion. This function calls low level libata
-driver's :c:func:`eng_timeout` callback, the standard callback for which is
-:c:func:`ata_eng_timeout`. It checks if a qc is active and calls
-:c:func:`ata_qc_timeout` on the qc if so. Actual error handling occurs in
-:c:func:`ata_qc_timeout`.
+timeout and ATAPI error completion. This function will check if a qc is active
+and has not failed yet. Such a qc will be marked with AC_ERR_TIMEOUT such that
+EH will know to handle it later. Then it calls low level libata driver's
+:c:func:`error_handler` callback.
-If EH is invoked for timeout, :c:func:`ata_qc_timeout` stops BMDMA and
+When the :c:func:`error_handler` callback is invoked it stops BMDMA and
completes the qc. Note that as we're currently in EH, we cannot call
scsi_done. As described in SCSI EH doc, a recovered scmd should be
either retried with :c:func:`scsi_queue_insert` or finished with
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/include/asm/ide.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-/*
- * This file contains the ARM architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-/* Copyright(c) 1996 Kars de Jong */
-/* Based on the ide driver from 1.2.13pl8 */
-
-/*
- * Credits (alphabetical):
- *
- * - Bjoern Brauel
- * - Kars de Jong
- * - Torsten Ebeling
- * - Dwight Engen
- * - Thorsten Floeck
- * - Roman Hodek
- * - Guenther Kelleter
- * - Chris Lawrence
- * - Michael Rausch
- * - Christian Sauer
- * - Michael Schmitz
- * - Jes Soerensen
- * - Michael Thurm
- * - Geert Uytterhoeven
- */
-
-#ifndef _M68K_IDE_H
-#define _M68K_IDE_H
-
-#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_MMU
-
-/*
- * Get rid of defs from io.h - ide has its private and conflicting versions
- * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
- * always use the `raw' MMIO versions
- */
-#undef readb
-#undef readw
-#undef writeb
-#undef writew
-
-#define readb in_8
-#define readw in_be16
-#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n)
-#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n)
-#define writeb(val, port) out_8(port, val)
-#define writew(val, port) out_be16(port, val)
-#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
-#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
-
-#else
-
-#define __ide_mm_insw(port, addr, n) io_insw((unsigned int)port, addr, n)
-#define __ide_mm_insl(port, addr, n) io_insl((unsigned int)port, addr, n)
-#define __ide_mm_outsw(port, addr, n) io_outsw((unsigned int)port, addr, n)
-#define __ide_mm_outsl(port, addr, n) io_outsl((unsigned int)port, addr, n)
-
-#endif /* CONFIG_MMU */
-
-#endif /* __KERNEL__ */
-#endif /* _M68K_IDE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/include/asm-parisc/ide.h
- *
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- */
-
-/*
- * This file contains the PARISC architecture specific IDE code.
- */
-
-#ifndef __ASM_PARISC_IDE_H
-#define __ASM_PARISC_IDE_H
-
-/* Generic I/O and MEMIO string operations. */
-
-#define __ide_insw insw
-#define __ide_insl insl
-#define __ide_outsw outsw
-#define __ide_outsl outsl
-
-static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- *(u16 *)addr = __raw_readw(port);
- addr += 2;
- }
-}
-
-static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- *(u32 *)addr = __raw_readl(port);
- addr += 4;
- }
-}
-
-static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- __raw_writew(*(u16 *)addr, port);
- addr += 2;
- }
-}
-
-static __inline__ void __ide_mm_outsl(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- __raw_writel(*(u32 *)addr, port);
- addr += 4;
- }
-}
-
-#endif /* __ASM_PARISC_IDE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- * This file contains the powerpc architecture specific IDE code.
- */
-#ifndef _ASM_POWERPC_IDE_H
-#define _ASM_POWERPC_IDE_H
-
-#include <linux/compiler.h>
-#include <asm/io.h>
-
-#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c))
-#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c))
-
-#endif /* _ASM_POWERPC_IDE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* ide.h: SPARC PCI specific IDE glue.
- *
- * Copyright (C) 1997 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- * Adaptation from sparc64 version to sparc by Pete Zaitcev.
- */
-
-#ifndef _SPARC_IDE_H
-#define _SPARC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-#ifdef CONFIG_SPARC64
-#include <asm/spitfire.h>
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-#else
-#include <linux/pgtable.h>
-#include <asm/psr.h>
-#endif
-
-#define __ide_insl(data_reg, buffer, wcount) \
- __ide_insw(data_reg, buffer, (wcount)<<1)
-#define __ide_outsl(data_reg, buffer, wcount) \
- __ide_outsw(data_reg, buffer, (wcount)<<1)
-
-/* On sparc, I/O ports and MMIO registers are accessed identically. */
-#define __ide_mm_insw __ide_insw
-#define __ide_mm_insl __ide_insl
-#define __ide_mm_outsw __ide_outsw
-#define __ide_mm_outsl __ide_outsl
-
-static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
-{
-#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
- unsigned long end = (unsigned long)dst + (count << 1);
-#endif
- u16 *ps = dst;
- u32 *pi;
-
- if(((unsigned long)ps) & 0x2) {
- *ps++ = __raw_readw(port);
- count--;
- }
- pi = (u32 *)ps;
- while(count >= 2) {
- u32 w;
-
- w = __raw_readw(port) << 16;
- w |= __raw_readw(port);
- *pi++ = w;
- count -= 2;
- }
- ps = (u16 *)pi;
- if(count)
- *ps++ = __raw_readw(port);
-
-#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
- __flush_dcache_range((unsigned long)dst, end);
-#endif
-}
-
-static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
-{
-#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
- unsigned long end = (unsigned long)src + (count << 1);
-#endif
- const u16 *ps = src;
- const u32 *pi;
-
- if(((unsigned long)src) & 0x2) {
- __raw_writew(*ps++, port);
- count--;
- }
- pi = (const u32 *)ps;
- while(count >= 2) {
- u32 w;
-
- w = *pi++;
- __raw_writew((w >> 16), port);
- __raw_writew(w, port);
- count -= 2;
- }
- ps = (const u16 *)pi;
- if(count)
- __raw_writew(*ps, port);
-
-#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
- __flush_dcache_range((unsigned long)src, end);
-#endif
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC_IDE_H */
{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_low_power }, /* Ice Lake LP AHCI */
{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_low_power }, /* Comet Lake PCH-U AHCI */
{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_low_power }, /* Comet Lake PCH RAID */
+ /* Elkhart Lake IDs 0x4b60 & 0x4b62 https://sata-io.org/product/8803 not tested yet */
+ { PCI_VDEVICE(INTEL, 0x4b63), board_ahci_low_power }, /* Elkhart Lake AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include "ahci.h"
#include <linux/log2.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/libata.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include "ahci.h"
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
- struct resource *res;
void __iomem *base;
u64 cfg;
int ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
#include <linux/pm.h>
#include <linux/ahci_platform.h>
#include <linux/device.h>
-#include <linux/of_address.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include "ahci.h"
static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
void __iomem *port_mmio = ahci_port_base(link->ap);
u32 px_cmd, px_is, px_val;
struct ata_port *ap = link->ap;
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/device.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
if (!plat_data)
return &ahci_port_info;
- plat_data->sgpio_ctrl = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 1));
+ plat_data->sgpio_ctrl = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(plat_data->sgpio_ctrl))
return &ahci_port_info;
#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include "ahci.h"
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
tegra->pdev = pdev;
tegra->soc = of_device_get_match_data(&pdev->dev);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
+ tegra->sata_regs = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(tegra->sata_regs))
return PTR_ERR(tegra->sata_regs);
* @timeout : timeout for achieving the value.
*/
static int xgene_ahci_poll_reg_val(struct ata_port *ap,
- void __iomem *reg, unsigned
- int val, unsigned long interval,
- unsigned long timeout)
+ void __iomem *reg, unsigned int val,
+ unsigned int interval, unsigned int timeout)
{
unsigned long deadline;
unsigned int tmp;
static int xgene_ahci_do_hardreset(struct ata_link *link,
unsigned long deadline, bool *online)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_host_priv *hpriv = ap->host->private_data;
struct xgene_ahci_context *ctx = hpriv->plat_data;
ctx->dev = dev;
/* Retrieve the IP core resource */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- ctx->csr_core = devm_ioremap_resource(dev, res);
+ ctx->csr_core = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(ctx->csr_core))
return PTR_ERR(ctx->csr_core);
/* Retrieve the IP diagnostic resource */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- ctx->csr_diag = devm_ioremap_resource(dev, res);
+ ctx->csr_diag = devm_platform_ioremap_resource(pdev, 2);
if (IS_ERR(ctx->csr_diag))
return PTR_ERR(ctx->csr_diag);
/* Retrieve the IP AXI resource */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
- ctx->csr_axi = devm_ioremap_resource(dev, res);
+ ctx->csr_axi = devm_platform_ioremap_resource(pdev, 3);
if (IS_ERR(ctx->csr_axi))
return PTR_ERR(ctx->csr_axi);
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
struct ata_taskfile *tf, int is_cmd, u16 flags,
- unsigned long timeout_msec)
+ unsigned int timeout_msec)
{
const u32 cmd_fis_len = 5; /* five dwords */
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
const char *reason = NULL;
- unsigned long now, msecs;
+ unsigned long now;
+ unsigned int msecs;
struct ata_taskfile tf;
bool fbs_disabled = false;
int rc;
int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline, bool *online)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#include "ahci.h"
}
}
- if (ap->ops->error_handler)
- ata_eh_release(ap);
+ ata_eh_release(ap);
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
- if (ap->ops->error_handler)
- ata_eh_acquire(ap);
+ ata_eh_acquire(ap);
ata_sff_flush_pio_task(ap);
if (qc->flags & ATA_QCFLAG_ACTIVE) {
qc->err_mask |= AC_ERR_TIMEOUT;
- if (ap->ops->error_handler)
- ata_port_freeze(ap);
- else
- ata_qc_complete(qc);
+ ata_port_freeze(ap);
ata_dev_warn(dev, "qc timeout after %u msecs (cmd 0x%x)\n",
timeout, command);
}
EXPORT_SYMBOL_GPL(ata_cable_sata);
-/**
- * ata_bus_probe - Reset and probe ATA bus
- * @ap: Bus to probe
- *
- * Master ATA bus probing function. Initiates a hardware-dependent
- * bus reset, then attempts to identify any devices found on
- * the bus.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- * RETURNS:
- * Zero on success, negative errno otherwise.
- */
-
-int ata_bus_probe(struct ata_port *ap)
-{
- unsigned int classes[ATA_MAX_DEVICES];
- int tries[ATA_MAX_DEVICES];
- int rc;
- struct ata_device *dev;
-
- ata_for_each_dev(dev, &ap->link, ALL)
- tries[dev->devno] = ATA_PROBE_MAX_TRIES;
-
- retry:
- ata_for_each_dev(dev, &ap->link, ALL) {
- /* If we issue an SRST then an ATA drive (not ATAPI)
- * may change configuration and be in PIO0 timing. If
- * we do a hard reset (or are coming from power on)
- * this is true for ATA or ATAPI. Until we've set a
- * suitable controller mode we should not touch the
- * bus as we may be talking too fast.
- */
- dev->pio_mode = XFER_PIO_0;
- dev->dma_mode = 0xff;
-
- /* If the controller has a pio mode setup function
- * then use it to set the chipset to rights. Don't
- * touch the DMA setup as that will be dealt with when
- * configuring devices.
- */
- if (ap->ops->set_piomode)
- ap->ops->set_piomode(ap, dev);
- }
-
- /* reset and determine device classes */
- ap->ops->phy_reset(ap);
-
- ata_for_each_dev(dev, &ap->link, ALL) {
- if (dev->class != ATA_DEV_UNKNOWN)
- classes[dev->devno] = dev->class;
- else
- classes[dev->devno] = ATA_DEV_NONE;
-
- dev->class = ATA_DEV_UNKNOWN;
- }
-
- /* read IDENTIFY page and configure devices. We have to do the identify
- specific sequence bass-ackwards so that PDIAG- is released by
- the slave device */
-
- ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
- if (tries[dev->devno])
- dev->class = classes[dev->devno];
-
- if (!ata_dev_enabled(dev))
- continue;
-
- rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
- dev->id);
- if (rc)
- goto fail;
- }
-
- /* Now ask for the cable type as PDIAG- should have been released */
- if (ap->ops->cable_detect)
- ap->cbl = ap->ops->cable_detect(ap);
-
- /* We may have SATA bridge glue hiding here irrespective of
- * the reported cable types and sensed types. When SATA
- * drives indicate we have a bridge, we don't know which end
- * of the link the bridge is which is a problem.
- */
- ata_for_each_dev(dev, &ap->link, ENABLED)
- if (ata_id_is_sata(dev->id))
- ap->cbl = ATA_CBL_SATA;
-
- /* After the identify sequence we can now set up the devices. We do
- this in the normal order so that the user doesn't get confused */
-
- ata_for_each_dev(dev, &ap->link, ENABLED) {
- ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
- rc = ata_dev_configure(dev);
- ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
- if (rc)
- goto fail;
- }
-
- /* configure transfer mode */
- rc = ata_set_mode(&ap->link, &dev);
- if (rc)
- goto fail;
-
- ata_for_each_dev(dev, &ap->link, ENABLED)
- return 0;
-
- return -ENODEV;
-
- fail:
- tries[dev->devno]--;
-
- switch (rc) {
- case -EINVAL:
- /* eeek, something went very wrong, give up */
- tries[dev->devno] = 0;
- break;
-
- case -ENODEV:
- /* give it just one more chance */
- tries[dev->devno] = min(tries[dev->devno], 1);
- fallthrough;
- case -EIO:
- if (tries[dev->devno] == 1) {
- /* This is the last chance, better to slow
- * down than lose it.
- */
- sata_down_spd_limit(&ap->link, 0);
- ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
- }
- }
-
- if (!tries[dev->devno])
- ata_dev_disable(dev);
-
- goto retry;
-}
-
/**
* sata_print_link_status - Print SATA link status
* @link: SATA link to printk link status about
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ const unsigned int *timing = sata_ehc_deb_timing(ehc);
int rc;
/* if we're about to do hardreset, nothing more to do */
int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
bool online;
int rc;
ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM },
- { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "Micron_1100_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
void ata_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
/* Trigger the LED (if available) */
ledtrig_disk_activity(!!(qc->tf.flags & ATA_TFLAG_WRITE));
- /* XXX: New EH and old EH use different mechanisms to
- * synchronize EH with regular execution path.
- *
- * In new EH, a qc owned by EH is marked with ATA_QCFLAG_EH.
- * Normal execution path is responsible for not accessing a
- * qc owned by EH. libata core enforces the rule by returning NULL
- * from ata_qc_from_tag() for qcs owned by EH.
+ /*
+ * In order to synchronize EH with the regular execution path, a qc that
+ * is owned by EH is marked with ATA_QCFLAG_EH.
*
- * Old EH depends on ata_qc_complete() nullifying completion
- * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
- * not synchronize with interrupt handler. Only PIO task is
- * taken care of.
+ * The normal execution path is responsible for not accessing a qc owned
+ * by EH. libata core enforces the rule by returning NULL from
+ * ata_qc_from_tag() for qcs owned by EH.
*/
- if (ap->ops->error_handler) {
- struct ata_device *dev = qc->dev;
- struct ata_eh_info *ehi = &dev->link->eh_info;
-
- if (unlikely(qc->err_mask))
- qc->flags |= ATA_QCFLAG_EH;
+ if (unlikely(qc->err_mask))
+ qc->flags |= ATA_QCFLAG_EH;
- /*
- * Finish internal commands without any further processing
- * and always with the result TF filled.
- */
- if (unlikely(ata_tag_internal(qc->tag))) {
- fill_result_tf(qc);
- trace_ata_qc_complete_internal(qc);
- __ata_qc_complete(qc);
- return;
- }
+ /*
+ * Finish internal commands without any further processing and always
+ * with the result TF filled.
+ */
+ if (unlikely(ata_tag_internal(qc->tag))) {
+ fill_result_tf(qc);
+ trace_ata_qc_complete_internal(qc);
+ __ata_qc_complete(qc);
+ return;
+ }
- /*
- * Non-internal qc has failed. Fill the result TF and
- * summon EH.
- */
- if (unlikely(qc->flags & ATA_QCFLAG_EH)) {
- fill_result_tf(qc);
- trace_ata_qc_complete_failed(qc);
- ata_qc_schedule_eh(qc);
- return;
- }
+ /* Non-internal qc has failed. Fill the result TF and summon EH. */
+ if (unlikely(qc->flags & ATA_QCFLAG_EH)) {
+ fill_result_tf(qc);
+ trace_ata_qc_complete_failed(qc);
+ ata_qc_schedule_eh(qc);
+ return;
+ }
- WARN_ON_ONCE(ata_port_is_frozen(ap));
+ WARN_ON_ONCE(ata_port_is_frozen(ap));
- /* read result TF if requested */
- if (qc->flags & ATA_QCFLAG_RESULT_TF)
- fill_result_tf(qc);
+ /* read result TF if requested */
+ if (qc->flags & ATA_QCFLAG_RESULT_TF)
+ fill_result_tf(qc);
- trace_ata_qc_complete_done(qc);
+ trace_ata_qc_complete_done(qc);
+ /*
+ * For CDL commands that completed without an error, check if we have
+ * sense data (ATA_SENSE is set). If we do, then the command may have
+ * been aborted by the device due to a limit timeout using the policy
+ * 0xD. For these commands, invoke EH to get the command sense data.
+ */
+ if (qc->result_tf.status & ATA_SENSE &&
+ ((ata_is_ncq(qc->tf.protocol) &&
+ dev->flags & ATA_DFLAG_CDL_ENABLED) ||
+ (!ata_is_ncq(qc->tf.protocol) &&
+ ata_id_sense_reporting_enabled(dev->id)))) {
/*
- * For CDL commands that completed without an error, check if
- * we have sense data (ATA_SENSE is set). If we do, then the
- * command may have been aborted by the device due to a limit
- * timeout using the policy 0xD. For these commands, invoke EH
- * to get the command sense data.
+ * Tell SCSI EH to not overwrite scmd->result even if this
+ * command is finished with result SAM_STAT_GOOD.
*/
- if (qc->result_tf.status & ATA_SENSE &&
- ((ata_is_ncq(qc->tf.protocol) &&
- dev->flags & ATA_DFLAG_CDL_ENABLED) ||
- (!ata_is_ncq(qc->tf.protocol) &&
- ata_id_sense_reporting_enabled(dev->id)))) {
- /*
- * Tell SCSI EH to not overwrite scmd->result even if
- * this command is finished with result SAM_STAT_GOOD.
- */
- qc->scsicmd->flags |= SCMD_FORCE_EH_SUCCESS;
- qc->flags |= ATA_QCFLAG_EH_SUCCESS_CMD;
- ehi->dev_action[dev->devno] |= ATA_EH_GET_SUCCESS_SENSE;
+ qc->scsicmd->flags |= SCMD_FORCE_EH_SUCCESS;
+ qc->flags |= ATA_QCFLAG_EH_SUCCESS_CMD;
+ ehi->dev_action[dev->devno] |= ATA_EH_GET_SUCCESS_SENSE;
- /*
- * set pending so that ata_qc_schedule_eh() does not
- * trigger fast drain, and freeze the port.
- */
- ap->pflags |= ATA_PFLAG_EH_PENDING;
- ata_qc_schedule_eh(qc);
- return;
- }
-
- /* Some commands need post-processing after successful
- * completion.
+ /*
+ * set pending so that ata_qc_schedule_eh() does not trigger
+ * fast drain, and freeze the port.
*/
- switch (qc->tf.command) {
- case ATA_CMD_SET_FEATURES:
- if (qc->tf.feature != SETFEATURES_WC_ON &&
- qc->tf.feature != SETFEATURES_WC_OFF &&
- qc->tf.feature != SETFEATURES_RA_ON &&
- qc->tf.feature != SETFEATURES_RA_OFF)
- break;
- fallthrough;
- case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
- case ATA_CMD_SET_MULTI: /* multi_count changed */
- /* revalidate device */
- ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
- break;
+ ap->pflags |= ATA_PFLAG_EH_PENDING;
+ ata_qc_schedule_eh(qc);
+ return;
+ }
- case ATA_CMD_SLEEP:
- dev->flags |= ATA_DFLAG_SLEEPING;
+ /* Some commands need post-processing after successful completion. */
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if (qc->tf.feature != SETFEATURES_WC_ON &&
+ qc->tf.feature != SETFEATURES_WC_OFF &&
+ qc->tf.feature != SETFEATURES_RA_ON &&
+ qc->tf.feature != SETFEATURES_RA_OFF)
break;
- }
-
- if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
- ata_verify_xfer(qc);
+ fallthrough;
+ case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
+ case ATA_CMD_SET_MULTI: /* multi_count changed */
+ /* revalidate device */
+ ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ break;
- __ata_qc_complete(qc);
- } else {
- if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
- return;
+ case ATA_CMD_SLEEP:
+ dev->flags |= ATA_DFLAG_SLEEPING;
+ break;
+ }
- /* read result TF if failed or requested */
- if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
- fill_result_tf(qc);
+ if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
+ ata_verify_xfer(qc);
- __ata_qc_complete(qc);
- }
+ __ata_qc_complete(qc);
}
EXPORT_SYMBOL_GPL(ata_qc_complete);
struct ata_link *link = qc->dev->link;
u8 prot = qc->tf.protocol;
- /* Make sure only one non-NCQ command is outstanding. The
- * check is skipped for old EH because it reuses active qc to
- * request ATAPI sense.
- */
- WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
+ /* Make sure only one non-NCQ command is outstanding. */
+ WARN_ON_ONCE(ata_tag_valid(link->active_tag));
if (ata_is_ncq(prot)) {
WARN_ON_ONCE(link->sactive & (1 << qc->hw_tag));
}
EXPORT_SYMBOL_GPL(ata_host_init);
-void __ata_port_probe(struct ata_port *ap)
+void ata_port_probe(struct ata_port *ap)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
spin_unlock_irqrestore(ap->lock, flags);
}
-
-int ata_port_probe(struct ata_port *ap)
-{
- int rc = 0;
-
- if (ap->ops->error_handler) {
- __ata_port_probe(ap);
- ata_port_wait_eh(ap);
- } else {
- rc = ata_bus_probe(ap);
- }
- return rc;
-}
-
+EXPORT_SYMBOL_GPL(ata_port_probe);
static void async_port_probe(void *data, async_cookie_t cookie)
{
if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
async_synchronize_cookie(cookie);
- (void)ata_port_probe(ap);
+ ata_port_probe(ap);
+ ata_port_wait_eh(ap);
/* in order to keep device order, we need to synchronize at this point */
async_synchronize_cookie(cookie);
struct ata_link *link;
struct ata_device *dev;
- if (!ap->ops->error_handler)
- goto skip_eh;
-
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_UNLOADING;
cancel_delayed_work_sync(&ap->hotplug_task);
cancel_delayed_work_sync(&ap->scsi_rescan_task);
- skip_eh:
/* clean up zpodd on port removal */
ata_for_each_link(link, ap, HOST_FIRST) {
ata_for_each_dev(dev, link, ALL) {
* The final register value.
*/
u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
- unsigned long interval, unsigned long timeout)
+ unsigned int interval, unsigned int timeout)
{
unsigned long deadline;
u32 tmp;
* are mostly for error handling, hotplug and those outlier devices that
* take an exceptionally long time to recover from reset.
*/
-static const unsigned long ata_eh_reset_timeouts[] = {
+static const unsigned int ata_eh_reset_timeouts[] = {
10000, /* most drives spin up by 10sec */
10000, /* > 99% working drives spin up before 20sec */
35000, /* give > 30 secs of idleness for outlier devices */
5000, /* and sweet one last chance */
- ULONG_MAX, /* > 1 min has elapsed, give up */
+ UINT_MAX, /* > 1 min has elapsed, give up */
};
static const unsigned int ata_eh_identify_timeouts[] = {
/* make sure sff pio task is not running */
ata_sff_flush_pio_task(ap);
- if (!ap->ops->error_handler)
- return;
-
/* synchronize with host lock and sort out timeouts */
/*
- * For new EH, all qcs are finished in one of three ways -
+ * For EH, all qcs are finished in one of three ways -
* normal completion, error completion, and SCSI timeout.
* Both completions can race against SCSI timeout. When normal
* completion wins, the qc never reaches EH. When error
void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
{
unsigned long flags;
+ struct ata_link *link;
- /* invoke error handler */
- if (ap->ops->error_handler) {
- struct ata_link *link;
-
- /* acquire EH ownership */
- ata_eh_acquire(ap);
+ /* acquire EH ownership */
+ ata_eh_acquire(ap);
repeat:
- /* kill fast drain timer */
- del_timer_sync(&ap->fastdrain_timer);
+ /* kill fast drain timer */
+ del_timer_sync(&ap->fastdrain_timer);
- /* process port resume request */
- ata_eh_handle_port_resume(ap);
+ /* process port resume request */
+ ata_eh_handle_port_resume(ap);
- /* fetch & clear EH info */
- spin_lock_irqsave(ap->lock, flags);
+ /* fetch & clear EH info */
+ spin_lock_irqsave(ap->lock, flags);
- ata_for_each_link(link, ap, HOST_FIRST) {
- struct ata_eh_context *ehc = &link->eh_context;
- struct ata_device *dev;
+ ata_for_each_link(link, ap, HOST_FIRST) {
+ struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev;
- memset(&link->eh_context, 0, sizeof(link->eh_context));
- link->eh_context.i = link->eh_info;
- memset(&link->eh_info, 0, sizeof(link->eh_info));
+ memset(&link->eh_context, 0, sizeof(link->eh_context));
+ link->eh_context.i = link->eh_info;
+ memset(&link->eh_info, 0, sizeof(link->eh_info));
- ata_for_each_dev(dev, link, ENABLED) {
- int devno = dev->devno;
+ ata_for_each_dev(dev, link, ENABLED) {
+ int devno = dev->devno;
- ehc->saved_xfer_mode[devno] = dev->xfer_mode;
- if (ata_ncq_enabled(dev))
- ehc->saved_ncq_enabled |= 1 << devno;
- }
+ ehc->saved_xfer_mode[devno] = dev->xfer_mode;
+ if (ata_ncq_enabled(dev))
+ ehc->saved_ncq_enabled |= 1 << devno;
}
+ }
- ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
- ap->pflags &= ~ATA_PFLAG_EH_PENDING;
- ap->excl_link = NULL; /* don't maintain exclusion over EH */
+ ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
+ ap->excl_link = NULL; /* don't maintain exclusion over EH */
- spin_unlock_irqrestore(ap->lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
- /* invoke EH, skip if unloading or suspended */
- if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
- ap->ops->error_handler(ap);
- else {
- /* if unloading, commence suicide */
- if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
- !(ap->pflags & ATA_PFLAG_UNLOADED))
- ata_eh_unload(ap);
- ata_eh_finish(ap);
- }
+ /* invoke EH, skip if unloading or suspended */
+ if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
+ ap->ops->error_handler(ap);
+ else {
+ /* if unloading, commence suicide */
+ if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
+ !(ap->pflags & ATA_PFLAG_UNLOADED))
+ ata_eh_unload(ap);
+ ata_eh_finish(ap);
+ }
- /* process port suspend request */
- ata_eh_handle_port_suspend(ap);
+ /* process port suspend request */
+ ata_eh_handle_port_suspend(ap);
- /* Exception might have happened after ->error_handler
- * recovered the port but before this point. Repeat
- * EH in such case.
- */
- spin_lock_irqsave(ap->lock, flags);
+ /*
+ * Exception might have happened after ->error_handler recovered the
+ * port but before this point. Repeat EH in such case.
+ */
+ spin_lock_irqsave(ap->lock, flags);
- if (ap->pflags & ATA_PFLAG_EH_PENDING) {
- if (--ap->eh_tries) {
- spin_unlock_irqrestore(ap->lock, flags);
- goto repeat;
- }
- ata_port_err(ap,
- "EH pending after %d tries, giving up\n",
- ATA_EH_MAX_TRIES);
- ap->pflags &= ~ATA_PFLAG_EH_PENDING;
+ if (ap->pflags & ATA_PFLAG_EH_PENDING) {
+ if (--ap->eh_tries) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ goto repeat;
}
+ ata_port_err(ap,
+ "EH pending after %d tries, giving up\n",
+ ATA_EH_MAX_TRIES);
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
+ }
- /* this run is complete, make sure EH info is clear */
- ata_for_each_link(link, ap, HOST_FIRST)
- memset(&link->eh_info, 0, sizeof(link->eh_info));
+ /* this run is complete, make sure EH info is clear */
+ ata_for_each_link(link, ap, HOST_FIRST)
+ memset(&link->eh_info, 0, sizeof(link->eh_info));
- /* end eh (clear host_eh_scheduled) while holding
- * ap->lock such that if exception occurs after this
- * point but before EH completion, SCSI midlayer will
- * re-initiate EH.
- */
- ap->ops->end_eh(ap);
+ /*
+ * end eh (clear host_eh_scheduled) while holding ap->lock such that if
+ * exception occurs after this point but before EH completion, SCSI
+ * midlayer will re-initiate EH.
+ */
+ ap->ops->end_eh(ap);
- spin_unlock_irqrestore(ap->lock, flags);
- ata_eh_release(ap);
- } else {
- WARN_ON(ata_qc_from_tag(ap, ap->link.active_tag) == NULL);
- ap->ops->eng_timeout(ap);
- }
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_eh_release(ap);
scsi_eh_flush_done_q(&ap->eh_done_q);
{
struct ata_port *ap = qc->ap;
- WARN_ON(!ap->ops->error_handler);
-
qc->flags |= ATA_QCFLAG_EH;
ata_eh_set_pending(ap, 1);
*/
void ata_std_sched_eh(struct ata_port *ap)
{
- WARN_ON(!ap->ops->error_handler);
-
if (ap->pflags & ATA_PFLAG_INITIALIZING)
return;
struct ata_queued_cmd *qc;
int tag, nr_aborted = 0;
- WARN_ON(!ap->ops->error_handler);
-
/* we're gonna abort all commands, no need for fast drain */
ata_eh_set_pending(ap, 0);
*/
static void __ata_port_freeze(struct ata_port *ap)
{
- WARN_ON(!ap->ops->error_handler);
-
if (ap->ops->freeze)
ap->ops->freeze(ap);
*/
int ata_port_freeze(struct ata_port *ap)
{
- WARN_ON(!ap->ops->error_handler);
-
__ata_port_freeze(ap);
return ata_port_abort(ap);
{
unsigned long flags;
- if (!ap->ops->error_handler)
- return;
-
spin_lock_irqsave(ap->lock, flags);
__ata_port_freeze(ap);
spin_unlock_irqrestore(ap->lock, flags);
{
unsigned long flags;
- if (!ap->ops->error_handler)
- return;
-
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~ATA_PFLAG_FROZEN;
/*
* Prepare to reset
*/
- while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
+ while (ata_eh_reset_timeouts[max_tries] != UINT_MAX)
max_tries++;
if (link->flags & ATA_LFLAG_RST_ONCE)
max_tries = 1;
#include "libata-transport.h"
/* debounce timing parameters in msecs { interval, duration, timeout } */
-const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
+const unsigned int sata_deb_timing_normal[] = { 5, 100, 2000 };
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
-const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
+const unsigned int sata_deb_timing_hotplug[] = { 25, 500, 2000 };
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
-const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
+const unsigned int sata_deb_timing_long[] = { 100, 2000, 5000 };
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
/**
* RETURNS:
* 0 on success, -errno on failure.
*/
-int sata_link_debounce(struct ata_link *link, const unsigned long *params,
+int sata_link_debounce(struct ata_link *link, const unsigned int *params,
unsigned long deadline)
{
- unsigned long interval = params[0];
- unsigned long duration = params[1];
+ unsigned int interval = params[0];
+ unsigned int duration = params[1];
unsigned long last_jiffies, t;
u32 last, cur;
int rc;
* RETURNS:
* 0 on success, -errno on failure.
*/
-int sata_link_resume(struct ata_link *link, const unsigned long *params,
+int sata_link_resume(struct ata_link *link, const unsigned int *params,
unsigned long deadline)
{
int tries = ATA_LINK_RESUME_TRIES;
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
+int sata_link_hardreset(struct ata_link *link, const unsigned int *timing,
unsigned long deadline,
bool *online, int (*check_ready)(struct ata_link *))
{
ap->flags |= port_info->flags;
ap->ops = port_info->port_ops;
ap->cbl = ATA_CBL_SATA;
+ ap->print_id = atomic_inc_return(&ata_print_id);
return ap;
}
EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
-/**
- * ata_sas_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sas_port_start(struct ata_port *ap)
-{
- /*
- * the port is marked as frozen at allocation time, but if we don't
- * have new eh, we won't thaw it
- */
- if (!ap->ops->error_handler)
- ap->pflags &= ~ATA_PFLAG_FROZEN;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_start);
-
-/**
- * ata_sas_port_stop - Undo ata_sas_port_start()
- * @ap: Port to shut down
- *
- * May be used as the port_stop() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-void ata_sas_port_stop(struct ata_port *ap)
-{
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_stop);
-
-/**
- * ata_sas_async_probe - simply schedule probing and return
- * @ap: Port to probe
- *
- * For batch scheduling of probe for sas attached ata devices, assumes
- * the port has already been through ata_sas_port_init()
- */
-void ata_sas_async_probe(struct ata_port *ap)
-{
- __ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_async_probe);
-
-int ata_sas_sync_probe(struct ata_port *ap)
-{
- return ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
-
-
-/**
- * ata_sas_port_init - Initialize a SATA device
- * @ap: SATA port to initialize
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- * RETURNS:
- * Zero on success, non-zero on error.
- */
-
-int ata_sas_port_init(struct ata_port *ap)
-{
- int rc = ap->ops->port_start(ap);
-
- if (rc)
- return rc;
- ap->print_id = atomic_inc_return(&ata_print_id);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_init);
-
int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
{
return ata_tport_add(parent, ap);
}
EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
-/**
- * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
- * @ap: SATA port to destroy
- *
- */
-
-void ata_sas_port_destroy(struct ata_port *ap)
-{
- if (ap->ops->port_stop)
- ap->ops->port_stop(ap);
- kfree(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
-
/**
* ata_sas_slave_configure - Default slave_config routine for libata devices
* @sdev: SCSI device to configure
struct scsi_device *sdev = to_scsi_device(device);
struct ata_port *ap;
struct ata_device *dev;
- long int input;
+ int input;
unsigned long flags;
int rc;
- rc = kstrtol(buf, 10, &input);
+ rc = kstrtoint(buf, 10, &input);
if (rc)
return rc;
if (input < -2)
qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
}
-/**
- * ata_dump_status - user friendly display of error info
- * @ap: the port in question
- * @tf: ptr to filled out taskfile
- *
- * Decode and dump the ATA error/status registers for the user so
- * that they have some idea what really happened at the non
- * make-believe layer.
- *
- * LOCKING:
- * inherited from caller
- */
-static void ata_dump_status(struct ata_port *ap, struct ata_taskfile *tf)
-{
- u8 stat = tf->status, err = tf->error;
-
- if (stat & ATA_BUSY) {
- ata_port_warn(ap, "status=0x%02x {Busy} ", stat);
- } else {
- ata_port_warn(ap, "status=0x%02x { %s%s%s%s%s%s%s} ", stat,
- stat & ATA_DRDY ? "DriveReady " : "",
- stat & ATA_DF ? "DeviceFault " : "",
- stat & ATA_DSC ? "SeekComplete " : "",
- stat & ATA_DRQ ? "DataRequest " : "",
- stat & ATA_CORR ? "CorrectedError " : "",
- stat & ATA_SENSE ? "Sense " : "",
- stat & ATA_ERR ? "Error " : "");
- if (err)
- ata_port_warn(ap, "error=0x%02x {%s%s%s%s%s%s", err,
- err & ATA_ABORTED ?
- "DriveStatusError " : "",
- err & ATA_ICRC ?
- (err & ATA_ABORTED ?
- "BadCRC " : "Sector ") : "",
- err & ATA_UNC ? "UncorrectableError " : "",
- err & ATA_IDNF ? "SectorIdNotFound " : "",
- err & ATA_TRK0NF ? "TrackZeroNotFound " : "",
- err & ATA_AMNF ? "AddrMarkNotFound " : "");
- }
-}
-
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
* @sk: the sense key we'll fill out
* @asc: the additional sense code we'll fill out
* @ascq: the additional sense code qualifier we'll fill out
- * @verbose: be verbose
*
* Converts an ATA error into a SCSI error. Fill out pointers to
* SK, ASC, and ASCQ bytes for later use in fixed or descriptor
* spin_lock_irqsave(host lock)
*/
static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
- u8 *asc, u8 *ascq, int verbose)
+ u8 *asc, u8 *ascq)
{
int i;
*sk = sense_table[i][1];
*asc = sense_table[i][2];
*ascq = sense_table[i][3];
- goto translate_done;
+ return;
}
}
}
*sk = stat_table[i][1];
*asc = stat_table[i][2];
*ascq = stat_table[i][3];
- goto translate_done;
+ return;
}
}
*sk = ABORTED_COMMAND;
*asc = 0x00;
*ascq = 0x00;
-
- translate_done:
- if (verbose)
- pr_err("ata%u: translated ATA stat/err 0x%02x/%02x to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
- id, drv_stat, drv_err, *sk, *asc, *ascq);
- return;
}
/*
struct ata_taskfile *tf = &qc->result_tf;
unsigned char *sb = cmd->sense_buffer;
unsigned char *desc = sb + 8;
- int verbose = qc->ap->ops->error_handler == NULL;
u8 sense_key, asc, ascq;
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
if (qc->err_mask ||
tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
- &sense_key, &asc, &ascq, verbose);
+ &sense_key, &asc, &ascq);
ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
} else {
/*
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->result_tf;
unsigned char *sb = cmd->sense_buffer;
- int verbose = qc->ap->ops->error_handler == NULL;
u64 block;
u8 sense_key, asc, ascq;
if (qc->err_mask ||
tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->print_id, tf->status, tf->error,
- &sense_key, &asc, &ascq, verbose);
+ &sense_key, &asc, &ascq);
ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq);
} else {
/* Could not decode error */
unsigned long flags;
struct ata_device *dev;
- if (!ap->ops->error_handler)
- return;
-
spin_lock_irqsave(ap->lock, flags);
dev = __ata_scsi_find_dev(ap, sdev);
if (dev && dev->sdev) {
static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
struct scsi_cmnd *cmd = qc->scsicmd;
u8 *cdb = cmd->cmnd;
int need_sense = (qc->err_mask != 0) &&
/* Keep the SCSI ML and status byte, clear host byte. */
cmd->result &= 0x0000ffff;
- if (need_sense && !ap->ops->error_handler)
- ata_dump_status(ap, &qc->result_tf);
-
ata_qc_done(qc);
}
return 0;
}
-static void atapi_sense_complete(struct ata_queued_cmd *qc)
-{
- if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) {
- /* FIXME: not quite right; we don't want the
- * translation of taskfile registers into
- * a sense descriptors, since that's only
- * correct for ATA, not ATAPI
- */
- ata_gen_passthru_sense(qc);
- }
-
- ata_qc_done(qc);
-}
-
-/* is it pointless to prefer PIO for "safety reasons"? */
-static inline int ata_pio_use_silly(struct ata_port *ap)
-{
- return (ap->flags & ATA_FLAG_PIO_DMA);
-}
-
-static void atapi_request_sense(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scsi_cmnd *cmd = qc->scsicmd;
-
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
-#ifdef CONFIG_ATA_SFF
- if (ap->ops->sff_tf_read)
- ap->ops->sff_tf_read(ap, &qc->tf);
-#endif
-
- /* fill these in, for the case where they are -not- overwritten */
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = qc->tf.error >> 4;
-
- ata_qc_reinit(qc);
-
- /* setup sg table and init transfer direction */
- sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
- ata_sg_init(qc, &qc->sgent, 1);
- qc->dma_dir = DMA_FROM_DEVICE;
-
- memset(&qc->cdb, 0, qc->dev->cdb_len);
- qc->cdb[0] = REQUEST_SENSE;
- qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
- qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- qc->tf.command = ATA_CMD_PACKET;
-
- if (ata_pio_use_silly(ap)) {
- qc->tf.protocol = ATAPI_PROT_DMA;
- qc->tf.feature |= ATAPI_PKT_DMA;
- } else {
- qc->tf.protocol = ATAPI_PROT_PIO;
- qc->tf.lbam = SCSI_SENSE_BUFFERSIZE;
- qc->tf.lbah = 0;
- }
- qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-
- qc->complete_fn = atapi_sense_complete;
-
- ata_qc_issue(qc);
-}
-
/*
* ATAPI devices typically report zero for their SCSI version, and sometimes
* deviate from the spec WRT response data format. If SCSI version is
struct scsi_cmnd *cmd = qc->scsicmd;
unsigned int err_mask = qc->err_mask;
- /* handle completion from new EH */
- if (unlikely(qc->ap->ops->error_handler &&
- (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) {
+ /* handle completion from EH */
+ if (unlikely(err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID)) {
if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
/* FIXME: not quite right; we don't want the
return;
}
- /* successful completion or old EH failure path */
- if (unlikely(err_mask & AC_ERR_DEV)) {
- cmd->result = SAM_STAT_CHECK_CONDITION;
- atapi_request_sense(qc);
- return;
- } else if (unlikely(err_mask)) {
- /* FIXME: not quite right; we don't want the
- * translation of taskfile registers into
- * a sense descriptors, since that's only
- * correct for ATA, not ATAPI
- */
- ata_gen_passthru_sense(qc);
- } else {
- if (cmd->cmnd[0] == INQUIRY && (cmd->cmnd[1] & 0x03) == 0)
- atapi_fixup_inquiry(cmd);
- cmd->result = SAM_STAT_GOOD;
- }
+ /* successful completion path */
+ if (cmd->cmnd[0] == INQUIRY && (cmd->cmnd[1] & 0x03) == 0)
+ atapi_fixup_inquiry(cmd);
+ cmd->result = SAM_STAT_GOOD;
ata_qc_done(qc);
}
unsigned long flags;
int devno, rc = 0;
- if (!ap->ops->error_handler)
- return -EOPNOTSUPP;
-
if (lun != SCAN_WILD_CARD && lun)
return -EINVAL;
{
struct ata_port *ap = qc->ap;
- if (ap->ops->error_handler) {
- if (in_wq) {
- /* EH might have kicked in while host lock is
- * released.
- */
- qc = ata_qc_from_tag(ap, qc->tag);
- if (qc) {
- if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ata_sff_irq_on(ap);
- ata_qc_complete(qc);
- } else
- ata_port_freeze(ap);
- }
- } else {
- if (likely(!(qc->err_mask & AC_ERR_HSM)))
+ if (in_wq) {
+ /* EH might have kicked in while host lock is released. */
+ qc = ata_qc_from_tag(ap, qc->tag);
+ if (qc) {
+ if (likely(!(qc->err_mask & AC_ERR_HSM))) {
+ ata_sff_irq_on(ap);
ata_qc_complete(qc);
- else
+ } else
ata_port_freeze(ap);
}
} else {
- if (in_wq) {
- ata_sff_irq_on(ap);
- ata_qc_complete(qc);
- } else
+ if (likely(!(qc->err_mask & AC_ERR_HSM)))
ata_qc_complete(qc);
+ else
+ ata_port_freeze(ap);
}
}
unsigned long deadline)
{
struct ata_eh_context *ehc = &link->eh_context;
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ const unsigned int *timing = sata_ehc_deb_timing(ehc);
bool online;
int rc;
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
extern struct ata_port *ata_port_alloc(struct ata_host *host);
extern const char *sata_spd_string(unsigned int spd);
-extern int ata_port_probe(struct ata_port *ap);
-extern void __ata_port_probe(struct ata_port *ap);
extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
u8 page, void *buf, unsigned int sectors);
extern void ata_scsi_hotplug(struct work_struct *work);
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
extern void ata_scsi_dev_rescan(struct work_struct *work);
-extern int ata_bus_probe(struct ata_port *ap);
extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
unsigned int id, u64 lun);
void ata_scsi_sdev_config(struct scsi_device *sdev);
return ret;
}
-static int arasan_cf_remove(struct platform_device *pdev)
+static void arasan_cf_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct arasan_cf_dev *acdev = host->ports[0]->private_data;
ata_host_detach(host);
cf_exit(acdev);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
static struct platform_driver arasan_cf_driver = {
.probe = arasan_cf_probe,
- .remove = arasan_cf_remove,
+ .remove_new = arasan_cf_remove,
.driver = {
.name = DRIVER_NAME,
.pm = &arasan_cf_pm_ops,
#include <asm/amigahw.h>
#include <asm/amigaints.h>
-#include <asm/ide.h>
#include <asm/setup.h>
#define DRV_NAME "pata_buddha"
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
+#include <linux/sys_soc.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/ktime.h>
.port_start = ep93xx_pata_port_start,
};
+static const struct soc_device_attribute ep93xx_soc_table[] = {
+ { .revision = "E1", .data = (void *)ATA_UDMA3 },
+ { .revision = "E2", .data = (void *)ATA_UDMA4 },
+ { /* sentinel */ }
+};
+
static int ep93xx_pata_probe(struct platform_device *pdev)
{
struct ep93xx_pata_data *drv_data;
drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
if (!drv_data) {
- err = -ENXIO;
+ err = -ENOMEM;
goto err_rel_gpio;
}
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
if (!host) {
- err = -ENXIO;
+ err = -ENOMEM;
goto err_rel_dma;
}
* so this driver supports only UDMA modes.
*/
if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) {
- int chip_rev = ep93xx_chip_revision();
+ const struct soc_device_attribute *match;
- if (chip_rev == EP93XX_CHIP_REV_E1)
- ap->udma_mask = ATA_UDMA3;
- else if (chip_rev == EP93XX_CHIP_REV_E2)
- ap->udma_mask = ATA_UDMA4;
+ match = soc_device_match(ep93xx_soc_table);
+ if (match)
+ ap->udma_mask = (unsigned int) match->data;
else
ap->udma_mask = ATA_UDMA2;
}
return err;
}
-static int ep93xx_pata_remove(struct platform_device *pdev)
+static void ep93xx_pata_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct ep93xx_pata_data *drv_data = host->private_data;
ep93xx_pata_release_dma(drv_data);
ep93xx_pata_clear_regs(drv_data->ide_base);
ep93xx_ide_release_gpio(pdev);
- return 0;
}
static struct platform_driver ep93xx_pata_platform_driver = {
.name = DRV_NAME,
},
.probe = ep93xx_pata_probe,
- .remove = ep93xx_pata_remove,
+ .remove_new = ep93xx_pata_remove,
};
module_platform_driver(ep93xx_pata_platform_driver);
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
-#include <asm/ide.h>
#define DRV_NAME "pata_falcon"
#define DRV_VERSION "0.1.0"
+static int pata_falcon_swap_mask;
+
+module_param_named(data_swab, pata_falcon_swap_mask, int, 0444);
+MODULE_PARM_DESC(data_swab, "Data byte swap enable/disable bitmap (0x1==drive1, 0x2==drive2, 0x4==drive3, 0x8==drive4, default==0)");
+
static const struct scsi_host_template pata_falcon_sht = {
ATA_PIO_SHT(DRV_NAME),
};
if (dev->class == ATA_DEV_ATA && cmd &&
!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)))
- swap = 0;
+ swap = (uintptr_t)ap->private_data & BIT(dev->devno);
/* Transfer multiple of 2 bytes */
if (rw == READ) {
struct resource *base_res, *ctl_res, *irq_res;
struct ata_host *host;
struct ata_port *ap;
- void __iomem *base;
- int irq = 0;
+ void __iomem *base, *ctl_base;
+ int mask_shift = 0; /* Q40 & Falcon default */
+ int irq = 0, io_offset = 1, reg_shift = 2; /* Falcon defaults */
dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
ap->pio_mask = ATA_PIO4;
ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
- base = (void __iomem *)base_mem_res->start;
/* N.B. this assumes data_addr will be used for word-sized I/O only */
- ap->ioaddr.data_addr = base + 0 + 0 * 4;
- ap->ioaddr.error_addr = base + 1 + 1 * 4;
- ap->ioaddr.feature_addr = base + 1 + 1 * 4;
- ap->ioaddr.nsect_addr = base + 1 + 2 * 4;
- ap->ioaddr.lbal_addr = base + 1 + 3 * 4;
- ap->ioaddr.lbam_addr = base + 1 + 4 * 4;
- ap->ioaddr.lbah_addr = base + 1 + 5 * 4;
- ap->ioaddr.device_addr = base + 1 + 6 * 4;
- ap->ioaddr.status_addr = base + 1 + 7 * 4;
- ap->ioaddr.command_addr = base + 1 + 7 * 4;
-
- base = (void __iomem *)ctl_mem_res->start;
- ap->ioaddr.altstatus_addr = base + 1;
- ap->ioaddr.ctl_addr = base + 1;
-
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
- (unsigned long)base_mem_res->start,
- (unsigned long)ctl_mem_res->start);
+ ap->ioaddr.data_addr = (void __iomem *)base_mem_res->start;
+
+ if (base_res) { /* only Q40 has IO resources */
+ io_offset = 0x10000;
+ reg_shift = 0;
+ base = (void __iomem *)base_res->start;
+ ctl_base = (void __iomem *)ctl_res->start;
+ } else {
+ base = (void __iomem *)base_mem_res->start;
+ ctl_base = (void __iomem *)ctl_mem_res->start;
+ }
+
+ ap->ioaddr.error_addr = base + io_offset + (1 << reg_shift);
+ ap->ioaddr.feature_addr = base + io_offset + (1 << reg_shift);
+ ap->ioaddr.nsect_addr = base + io_offset + (2 << reg_shift);
+ ap->ioaddr.lbal_addr = base + io_offset + (3 << reg_shift);
+ ap->ioaddr.lbam_addr = base + io_offset + (4 << reg_shift);
+ ap->ioaddr.lbah_addr = base + io_offset + (5 << reg_shift);
+ ap->ioaddr.device_addr = base + io_offset + (6 << reg_shift);
+ ap->ioaddr.status_addr = base + io_offset + (7 << reg_shift);
+ ap->ioaddr.command_addr = base + io_offset + (7 << reg_shift);
+
+ ap->ioaddr.altstatus_addr = ctl_base + io_offset;
+ ap->ioaddr.ctl_addr = ctl_base + io_offset;
+
+ ata_port_desc(ap, "cmd %px ctl %px data %px",
+ base, ctl_base, ap->ioaddr.data_addr);
+
+ if (pdev->id > 0)
+ mask_shift = 2;
+ ap->private_data = (void *)(uintptr_t)(pata_falcon_swap_mask >> mask_shift);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq_res && irq_res->start > 0) {
#include <linux/module.h>
#include <linux/libata.h>
#include <linux/bitops.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/clk.h>
#include "sata_gemini.h"
if (irq < 0)
return irq;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- ftide->base = devm_ioremap_resource(dev, res);
+ ftide->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(ftide->base))
return PTR_ERR(ftide->base);
return ret;
}
-static int pata_ftide010_remove(struct platform_device *pdev)
+static void pata_ftide010_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct ftide010 *ftide = host->private_data;
ata_host_detach(ftide->host);
clk_disable_unprepare(ftide->pclk);
-
- return 0;
}
static const struct of_device_id pata_ftide010_of_match[] = {
.of_match_table = pata_ftide010_of_match,
},
.probe = pata_ftide010_probe,
- .remove = pata_ftide010_remove,
+ .remove_new = pata_ftide010_remove,
};
module_platform_driver(pata_ftide010_driver);
+MODULE_DESCRIPTION("low level driver for Faraday Technology FTIDE010");
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amigayle.h>
-#include <asm/ide.h>
#include <asm/setup.h>
#define DRV_NAME "pata_gayle"
if (!priv)
return -ENOMEM;
- priv->clk = devm_clk_get(&pdev->dev, NULL);
+ priv->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(priv->clk)) {
- dev_err(&pdev->dev, "Failed to get clock\n");
+ dev_err(&pdev->dev, "Failed to get and enable clock\n");
return PTR_ERR(priv->clk);
}
- ret = clk_prepare_enable(priv->clk);
- if (ret)
- return ret;
-
host = ata_host_alloc(&pdev->dev, 1);
- if (!host) {
- ret = -ENOMEM;
- goto err;
- }
+ if (!host)
+ return -ENOMEM;
host->private_data = priv;
ap = host->ports[0];
ap->pio_mask = ATA_PIO4;
ap->flags |= ATA_FLAG_SLAVE_POSS;
- io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->host_regs = devm_ioremap_resource(&pdev->dev, io_res);
- if (IS_ERR(priv->host_regs)) {
- ret = PTR_ERR(priv->host_regs);
- goto err;
- }
+ priv->host_regs = devm_platform_get_and_ioremap_resource(pdev, 0, &io_res);
+ if (IS_ERR(priv->host_regs))
+ return PTR_ERR(priv->host_regs);
ap->ioaddr.cmd_addr = priv->host_regs + PATA_IMX_DRIVE_DATA;
ap->ioaddr.ctl_addr = priv->host_regs + PATA_IMX_DRIVE_CONTROL;
&pata_imx_sht);
if (ret)
- goto err;
+ return ret;
return 0;
-err:
- clk_disable_unprepare(priv->clk);
-
- return ret;
}
-static int pata_imx_remove(struct platform_device *pdev)
+static void pata_imx_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct pata_imx_priv *priv = host->private_data;
ata_host_detach(host);
__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
-
- clk_disable_unprepare(priv->clk);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
static struct platform_driver pata_imx_driver = {
.probe = pata_imx_probe,
- .remove = pata_imx_remove,
+ .remove_new = pata_imx_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = imx_pata_dt_ids,
int ret;
int irq;
- cmd = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-
- if (!cmd || !ctl)
- return -EINVAL;
-
ixpp = devm_kzalloc(dev, sizeof(*ixpp), GFP_KERNEL);
if (!ixpp)
return -ENOMEM;
if (ret)
return ret;
- ixpp->cmd = devm_ioremap_resource(dev, cmd);
- ixpp->ctl = devm_ioremap_resource(dev, ctl);
- if (IS_ERR(ixpp->cmd) || IS_ERR(ixpp->ctl))
- return -ENOMEM;
+ ixpp->cmd = devm_platform_get_and_ioremap_resource(pdev, 0, &cmd);
+ if (IS_ERR(ixpp->cmd))
+ return PTR_ERR(ixpp->cmd);
+
+ ixpp->ctl = devm_platform_get_and_ioremap_resource(pdev, 1, &ctl);
+ if (IS_ERR(ixpp->ctl))
+ return PTR_ERR(ixpp->ctl);
irq = platform_get_irq(pdev, 0);
- if (irq > 0)
- irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
- else if (irq < 0)
+ if (irq < 0)
return irq;
- else
- return -EINVAL;
+ irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
/* Just one port to set up */
ixp4xx_setup_port(ixpp->host->ports[0], ixpp, cmd->start, ctl->start);
#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/libata.h>
+#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <linux/types.h>
#include <asm/cacheflush.h>
return rv;
}
-static int
-mpc52xx_ata_remove(struct platform_device *op)
+static void mpc52xx_ata_remove(struct platform_device *op)
{
struct ata_host *host = platform_get_drvdata(op);
struct mpc52xx_ata_priv *priv = host->private_data;
irq_dispose_mapping(task_irq);
bcom_ata_release(priv->dmatsk);
irq_dispose_mapping(priv->ata_irq);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
static struct platform_driver mpc52xx_ata_of_platform_driver = {
.probe = mpc52xx_ata_probe,
- .remove = mpc52xx_ata_remove,
+ .remove_new = mpc52xx_ata_remove,
#ifdef CONFIG_PM_SLEEP
.suspend = mpc52xx_ata_suspend,
.resume = mpc52xx_ata_resume,
return ret;
}
-static int pxa_ata_remove(struct platform_device *pdev)
+static void pxa_ata_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct pata_pxa_data *data = host->ports[0]->private_data;
dma_release_channel(data->dma_chan);
ata_host_detach(host);
-
- return 0;
}
static struct platform_driver pxa_ata_driver = {
.probe = pxa_ata_probe,
- .remove = pxa_ata_remove,
+ .remove_new = pxa_ata_remove,
.driver = {
.name = DRV_NAME,
},
return 0;
}
-static int rb532_pata_driver_remove(struct platform_device *pdev)
+static void rb532_pata_driver_remove(struct platform_device *pdev)
{
struct ata_host *ah = platform_get_drvdata(pdev);
ata_host_detach(ah);
-
- return 0;
}
static struct platform_driver rb532_pata_platform_driver = {
.probe = rb532_pata_driver_probe,
- .remove = rb532_pata_driver_remove,
+ .remove_new = rb532_pata_driver_remove,
.driver = {
.name = DRV_NAME,
},
* document.
*
* This function is also called to turn off DMA when a timeout occurs
- * during DMA operation. In both cases we need to reset the engine,
- * so no actual eng_timeout handler is required.
+ * during DMA operation. In both cases we need to reset the engine.
*
* We assume bmdma_stop is always called if bmdma_start as called. If
* not then we may need to wrap qc_issue.
#include <linux/module.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
-#include <linux/of_address.h>
+#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/libata.h>
return err;
}
-static int sata_dwc_remove(struct platform_device *ofdev)
+static void sata_dwc_remove(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
#endif
dev_dbg(dev, "done\n");
- return 0;
}
static const struct of_device_id sata_dwc_match[] = {
.of_match_table = sata_dwc_match,
},
.probe = sata_dwc_probe,
- .remove = sata_dwc_remove,
+ .remove_new = sata_dwc_remove,
};
module_platform_driver(sata_dwc_driver);
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
static unsigned int intr_coalescing_count;
module_param(intr_coalescing_count, int, S_IRUGO);
return retval;
}
-static int sata_fsl_remove(struct platform_device *ofdev)
+static void sata_fsl_remove(struct platform_device *ofdev)
{
struct ata_host *host = platform_get_drvdata(ofdev);
struct sata_fsl_host_priv *host_priv = host->private_data;
device_remove_file(&ofdev->dev, &host_priv->rx_watermark);
ata_host_detach(host);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
.of_match_table = fsl_sata_match,
},
.probe = sata_fsl_probe,
- .remove = sata_fsl_remove,
+ .remove_new = sata_fsl_remove,
#ifdef CONFIG_PM_SLEEP
.suspend = sata_fsl_suspend,
.resume = sata_fsl_resume,
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/reset.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
return ret;
}
-static int gemini_sata_remove(struct platform_device *pdev)
+static void gemini_sata_remove(struct platform_device *pdev)
{
struct sata_gemini *sg = platform_get_drvdata(pdev);
clk_unprepare(sg->sata0_pclk);
}
sg_singleton = NULL;
-
- return 0;
}
static const struct of_device_id gemini_sata_of_match[] = {
.of_match_table = gemini_sata_of_match,
},
.probe = gemini_sata_probe,
- .remove = gemini_sata_remove,
+ .remove_new = gemini_sata_remove,
};
module_platform_driver(gemini_sata_driver);
+MODULE_DESCRIPTION("low level driver for Cortina Systems Gemini SATA bridge");
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- static const unsigned long timing[] = { 5, 100, 500};
+ static const unsigned int timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ata_port *ap = link->ap;
void __iomem *port_base = inic_port_base(ap);
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
int rc;
/* hammer it into sane state */
/* Workaround for errata FEr SATA#10 (part 2) */
do {
- const unsigned long *timing =
+ const unsigned int *timing =
sata_ehc_deb_timing(&link->eh_context);
rc = sata_link_hardreset(link, timing, deadline + extra,
* A platform bus SATA device has been unplugged. Perform the needed
* cleanup. Also called on module unload for any active devices.
*/
-static int mv_platform_remove(struct platform_device *pdev)
+static void mv_platform_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct mv_host_priv *hpriv = host->private_data;
}
phy_power_off(hpriv->port_phys[port]);
}
- return 0;
}
#ifdef CONFIG_PM_SLEEP
static struct platform_driver mv_platform_driver = {
.probe = mv_platform_probe,
- .remove = mv_platform_remove,
+ .remove_new = mv_platform_remove,
.suspend = mv_platform_suspend,
.resume = mv_platform_resume,
.driver = {
sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
NULL, NULL);
else {
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ const unsigned int *timing = sata_ehc_deb_timing(ehc);
int rc;
if (!(ehc->i.flags & ATA_EHI_QUIET))
#include <linux/module.h>
#include <linux/ata.h>
#include <linux/libata.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/err.h>
struct device *dev = &pdev->dev;
struct ata_host *host;
struct sata_rcar_priv *priv;
- struct resource *mem;
- int irq;
- int ret = 0;
+ int irq, ret;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- if (!irq)
- return -EINVAL;
priv = devm_kzalloc(dev, sizeof(struct sata_rcar_priv), GFP_KERNEL);
if (!priv)
host->private_data = priv;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(dev, mem);
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
ret = PTR_ERR(priv->base);
goto err_pm_put;
return ret;
}
-static int sata_rcar_remove(struct platform_device *pdev)
+static void sata_rcar_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct sata_rcar_priv *priv = host->private_data;
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
static struct platform_driver sata_rcar_driver = {
.probe = sata_rcar_probe,
- .remove = sata_rcar_remove,
+ .remove_new = sata_rcar_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = sata_rcar_match,
static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
const struct ata_taskfile *tf,
int is_cmd, u32 ctrl,
- unsigned long timeout_msec)
+ unsigned int timeout_msec)
{
void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
{
struct ata_port *ap = link->ap;
int pmp = sata_srst_pmp(link);
- unsigned long timeout_msec = 0;
+ unsigned int timeout_msec = 0;
struct ata_taskfile tf;
const char *reason;
int rc;
.dma_boundary = ATA_DMA_BOUNDARY,
};
-/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
.inherits = &ata_sff_port_ops,
* However we don't need to issue a hard reset here for these
* reasons:
* a. When probing the device, libsas/libata already issues a
- * hard reset in sas_probe_sata() -> ata_sas_async_probe().
+ * hard reset in sas_probe_sata() -> ata_port_probe().
* Note that in hisi_sas_debug_I_T_nexus_reset() we take care
* to issue a hard reset by checking the dev status (== INIT).
* b. When resetting the controller, this is simply unnecessary.
.qc_prep = ata_noop_qc_prep,
.qc_issue = sas_ata_qc_issue,
.qc_fill_rtf = sas_ata_qc_fill_rtf,
- .port_start = ata_sas_port_start,
- .port_stop = ata_sas_port_stop,
.set_dmamode = sas_ata_set_dmamode,
.sched_eh = sas_ata_sched_eh,
.end_eh = sas_ata_end_eh,
ap->private_data = found_dev;
ap->cbl = ATA_CBL_SATA;
ap->scsi_host = shost;
- rc = ata_sas_port_init(ap);
- if (rc)
- goto destroy_port;
rc = ata_sas_tport_add(ata_host->dev, ap);
if (rc)
return 0;
destroy_port:
- ata_sas_port_destroy(ap);
+ kfree(ap);
free_host:
ata_host_put(ata_host);
return rc;
if (!dev_is_sata(dev))
continue;
- ata_sas_async_probe(dev->sata_dev.ap);
+ ata_port_probe(dev->sata_dev.ap);
}
mutex_unlock(&port->ha->disco_mutex);
if (dev_is_sata(dev) && dev->sata_dev.ap) {
ata_sas_tport_delete(dev->sata_dev.ap);
- ata_sas_port_destroy(dev->sata_dev.ap);
+ kfree(dev->sata_dev.ap);
ata_host_put(dev->sata_dev.ata_host);
dev->sata_dev.ata_host = NULL;
dev->sata_dev.ap = NULL;
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Generic I/O and MEMIO string operations. */
-
-#define __ide_insw insw
-#define __ide_insl insl
-#define __ide_outsw outsw
-#define __ide_outsl outsl
-
-static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- *(u16 *)addr = readw(port);
- addr += 2;
- }
-}
-
-static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- *(u32 *)addr = readl(port);
- addr += 4;
- }
-}
-
-static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
-{
- while (count--) {
- writew(*(u16 *)addr, port);
- addr += 2;
- }
-}
-
-static __inline__ void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
-{
- while (count--) {
- writel(*(u32 *)addr, port);
- addr += 4;
- }
-}
ATA_LINK_RESUME_TRIES = 5,
/* how hard are we gonna try to probe/recover devices */
- ATA_PROBE_MAX_TRIES = 3,
ATA_EH_DEV_TRIES = 3,
ATA_EH_PMP_TRIES = 5,
ATA_EH_PMP_LINK_TRIES = 3,
ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state,
ssize_t size);
- /*
- * Obsolete
- */
- void (*phy_reset)(struct ata_port *ap);
- void (*eng_timeout)(struct ata_port *ap);
-
/*
* ->inherits must be the last field and all the preceding
* fields must be pointers.
extern int ata_ratelimit(void);
extern void ata_msleep(struct ata_port *ap, unsigned int msecs);
extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask,
- u32 val, unsigned long interval, unsigned long timeout);
+ u32 val, unsigned int interval, unsigned int timeout);
extern int atapi_cmd_type(u8 opcode);
extern unsigned int ata_pack_xfermask(unsigned int pio_mask,
unsigned int mwdma_mask,
* SATA specific code - drivers/ata/libata-sata.c
*/
#ifdef CONFIG_SATA_HOST
-extern const unsigned long sata_deb_timing_normal[];
-extern const unsigned long sata_deb_timing_hotplug[];
-extern const unsigned long sata_deb_timing_long[];
+extern const unsigned int sata_deb_timing_normal[];
+extern const unsigned int sata_deb_timing_hotplug[];
+extern const unsigned int sata_deb_timing_long[];
-static inline const unsigned long *
+static inline const unsigned int *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
extern int sata_set_spd(struct ata_link *link);
extern int sata_link_hardreset(struct ata_link *link,
- const unsigned long *timing, unsigned long deadline,
+ const unsigned int *timing, unsigned long deadline,
bool *online, int (*check_ready)(struct ata_link *));
-extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
+extern int sata_link_resume(struct ata_link *link, const unsigned int *params,
unsigned long deadline);
extern int ata_eh_read_sense_success_ncq_log(struct ata_link *link);
extern void ata_eh_analyze_ncq_error(struct ata_link *link);
#else
-static inline const unsigned long *
+static inline const unsigned int *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
return NULL;
}
static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
static inline int sata_link_hardreset(struct ata_link *link,
- const unsigned long *timing,
+ const unsigned int *timing,
unsigned long deadline,
bool *online,
int (*check_ready)(struct ata_link *))
return -EOPNOTSUPP;
}
static inline int sata_link_resume(struct ata_link *link,
- const unsigned long *params,
+ const unsigned int *params,
unsigned long deadline)
{
return -EOPNOTSUPP;
static inline void ata_eh_analyze_ncq_error(struct ata_link *link) { }
#endif
extern int sata_link_debounce(struct ata_link *link,
- const unsigned long *params, unsigned long deadline);
+ const unsigned int *params, unsigned long deadline);
extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
bool spm_wakeup);
extern int ata_slave_link_init(struct ata_port *ap);
-extern void ata_sas_port_destroy(struct ata_port *);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
struct ata_port_info *, struct Scsi_Host *);
-extern void ata_sas_async_probe(struct ata_port *ap);
-extern int ata_sas_sync_probe(struct ata_port *ap);
-extern int ata_sas_port_init(struct ata_port *);
-extern int ata_sas_port_start(struct ata_port *ap);
+extern void ata_port_probe(struct ata_port *ap);
extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
extern void ata_sas_tport_delete(struct ata_port *ap);
-extern void ata_sas_port_stop(struct ata_port *ap);
extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
{
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (unlikely(!qc) || !ap->ops->error_handler)
+ if (unlikely(!qc))
return qc;
if ((qc->flags & (ATA_QCFLAG_ACTIVE |
}
static inline unsigned long ata_deadline(unsigned long from_jiffies,
- unsigned long timeout_msecs)
+ unsigned int timeout_msecs)
{
return from_jiffies + msecs_to_jiffies(timeout_msecs);
}
git.samba.org / sfrench / cifs-2.6.git / commitdiff