phy: cpcap-usb: Fix error path when no host driver is loaded
authorTony Lindgren <tony@atomide.com>
Fri, 20 Dec 2019 10:51:40 +0000 (16:21 +0530)
committerKishon Vijay Abraham I <kishon@ti.com>
Fri, 20 Dec 2019 11:29:28 +0000 (16:59 +0530)
If musb_mailbox() returns an error, we must still continue to finish
configuring the phy.

Otherwise the phy state may end up only half initialized, and this can
cause the debug serial console to stop working. And this will happen if the
usb driver musb controller is not loaded.

Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox().

Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/motorola/phy-cpcap-usb.c

index ead06c6c26019a91424a7e6be990f9ed7a8dbb0f..eeb47fddf64b79756eae0065e052e4c5de71386e 100644 (file)
@@ -207,6 +207,19 @@ static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata,
 static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
 static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
 
+static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata,
+                                      enum musb_vbus_id_status status)
+{
+       int error;
+
+       error = musb_mailbox(status);
+       if (!error)
+               return;
+
+       dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n",
+               __func__, error);
+}
+
 static void cpcap_usb_detect(struct work_struct *work)
 {
        struct cpcap_phy_ddata *ddata;
@@ -226,9 +239,7 @@ static void cpcap_usb_detect(struct work_struct *work)
                if (error)
                        goto out_err;
 
-               error = musb_mailbox(MUSB_ID_GROUND);
-               if (error)
-                       goto out_err;
+               cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
 
                error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
                                           CPCAP_BIT_VBUSSTBY_EN |
@@ -257,9 +268,7 @@ static void cpcap_usb_detect(struct work_struct *work)
                        error = cpcap_usb_set_usb_mode(ddata);
                        if (error)
                                goto out_err;
-                       error = musb_mailbox(MUSB_ID_GROUND);
-                       if (error)
-                               goto out_err;
+                       cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
 
                        return;
                }
@@ -269,9 +278,7 @@ static void cpcap_usb_detect(struct work_struct *work)
                error = cpcap_usb_set_usb_mode(ddata);
                if (error)
                        goto out_err;
-               error = musb_mailbox(MUSB_VBUS_VALID);
-               if (error)
-                       goto out_err;
+               cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID);
 
                return;
        }
@@ -281,9 +288,7 @@ static void cpcap_usb_detect(struct work_struct *work)
        if (error)
                goto out_err;
 
-       error = musb_mailbox(MUSB_VBUS_OFF);
-       if (error)
-               goto out_err;
+       cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
 
        dev_dbg(ddata->dev, "set UART mode\n");
 
@@ -649,9 +654,7 @@ static int cpcap_usb_phy_remove(struct platform_device *pdev)
        if (error)
                dev_err(ddata->dev, "could not set UART mode\n");
 
-       error = musb_mailbox(MUSB_VBUS_OFF);
-       if (error)
-               dev_err(ddata->dev, "could not set mailbox\n");
+       cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
 
        usb_remove_phy(&ddata->phy);
        cancel_delayed_work_sync(&ddata->detect_work);