tools/testing/selftests/firmware/fw_filesystem.sh

   1 #!/bin/sh
   2 # This validates that the kernel will load firmware out of its list of
   3 # firmware locations on disk. Since the user helper does similar work,
   4 # we reset the custom load directory to a location the user helper doesn't
   5 # know so we can be sure we're not accidentally testing the user helper.
   6 set -e
   7
   8 DIR=/sys/devices/virtual/misc/test_firmware
   9 TEST_DIR=$(dirname $0)
  10
  11 test_modprobe()
  12 {
  13         if [ ! -d $DIR ]; then
  14                 echo "$0: $DIR not present"
  15                 echo "You must have the following enabled in your kernel:"
  16                 cat $TEST_DIR/config
  17                 exit 1
  18         fi
  19 }
  20
  21 trap "test_modprobe" EXIT
  22
  23 if [ ! -d $DIR ]; then
  24         modprobe test_firmware
  25 fi
  26
  27 # CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/
  28 # These days most distros enable CONFIG_FW_LOADER_USER_HELPER but disable
  29 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK. We use /sys/class/firmware/ as an
  30 # indicator for CONFIG_FW_LOADER_USER_HELPER.
  31 HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi)
  32
  33 if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
  34         OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
  35 fi
  36
  37 OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
  38
  39 FWPATH=$(mktemp -d)
  40 FW="$FWPATH/test-firmware.bin"
  41
  42 test_finish()
  43 {
  44         if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
  45                 echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
  46         fi
  47         echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
  48         rm -f "$FW"
  49         rmdir "$FWPATH"
  50 }
  51
  52 trap "test_finish" EXIT
  53
  54 if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
  55         # Turn down the timeout so failures don't take so long.
  56         echo 1 >/sys/class/firmware/timeout
  57 fi
  58
  59 # Set the kernel search path.
  60 echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
  61
  62 # This is an unlikely real-world firmware content. :)
  63 echo "ABCD0123" >"$FW"
  64
  65 NAME=$(basename "$FW")
  66
  67 if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
  68         echo "$0: empty filename should not succeed" >&2
  69         exit 1
  70 fi
  71
  72 if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
  73         echo "$0: empty filename should not succeed (async)" >&2
  74         exit 1
  75 fi
  76
  77 # Request a firmware that doesn't exist, it should fail.
  78 if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
  79         echo "$0: firmware shouldn't have loaded" >&2
  80         exit 1
  81 fi
  82 if diff -q "$FW" /dev/test_firmware >/dev/null ; then
  83         echo "$0: firmware was not expected to match" >&2
  84         exit 1
  85 else
  86         if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
  87                 echo "$0: timeout works"
  88         fi
  89 fi
  90
  91 # This should succeed via kernel load or will fail after 1 second after
  92 # being handed over to the user helper, which won't find the fw either.
  93 if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
  94         echo "$0: could not trigger request" >&2
  95         exit 1
  96 fi
  97
  98 # Verify the contents are what we expect.
  99 if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
 100         echo "$0: firmware was not loaded" >&2
 101         exit 1
 102 else
 103         echo "$0: filesystem loading works"
 104 fi
 105
 106 # Try the asynchronous version too
 107 if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
 108         echo "$0: could not trigger async request" >&2
 109         exit 1
 110 fi
 111
 112 # Verify the contents are what we expect.
 113 if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
 114         echo "$0: firmware was not loaded (async)" >&2
 115         exit 1
 116 else
 117         echo "$0: async filesystem loading works"
 118 fi
 119
 120 ### Batched requests tests
 121 test_config_present()
 122 {
 123         if [ ! -f $DIR/reset ]; then
 124                 echo "Configuration triggers not present, ignoring test"
 125                 exit 0
 126         fi
 127 }
 128
 129 # Defaults :
 130 #
 131 # send_uevent: 1
 132 # sync_direct: 0
 133 # name: test-firmware.bin
 134 # num_requests: 4
 135 config_reset()
 136 {
 137         echo 1 >  $DIR/reset
 138 }
 139
 140 release_all_firmware()
 141 {
 142         echo 1 >  $DIR/release_all_firmware
 143 }
 144
 145 config_set_name()
 146 {
 147         echo -n $1 >  $DIR/config_name
 148 }
 149
 150 config_set_sync_direct()
 151 {
 152         echo 1 >  $DIR/config_sync_direct
 153 }
 154
 155 config_unset_sync_direct()
 156 {
 157         echo 0 >  $DIR/config_sync_direct
 158 }
 159
 160 config_set_uevent()
 161 {
 162         echo 1 >  $DIR/config_send_uevent
 163 }
 164
 165 config_unset_uevent()
 166 {
 167         echo 0 >  $DIR/config_send_uevent
 168 }
 169
 170 config_trigger_sync()
 171 {
 172         echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
 173 }
 174
 175 config_trigger_async()
 176 {
 177         echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
 178 }
 179
 180 config_set_read_fw_idx()
 181 {
 182         echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
 183 }
 184
 185 read_firmwares()
 186 {
 187         for i in $(seq 0 3); do
 188                 config_set_read_fw_idx $i
 189                 # Verify the contents are what we expect.
 190                 # -Z required for now -- check for yourself, md5sum
 191                 # on $FW and DIR/read_firmware will yield the same. Even
 192                 # cmp agrees, so something is off.
 193                 if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
 194                         echo "request #$i: firmware was not loaded" >&2
 195                         exit 1
 196                 fi
 197         done
 198 }
 199
 200 read_firmwares_expect_nofile()
 201 {
 202         for i in $(seq 0 3); do
 203                 config_set_read_fw_idx $i
 204                 # Ensures contents differ
 205                 if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
 206                         echo "request $i: file was not expected to match" >&2
 207                         exit 1
 208                 fi
 209         done
 210 }
 211
 212 test_batched_request_firmware_nofile()
 213 {
 214         echo -n "Batched request_firmware() nofile try #$1: "
 215         config_reset
 216         config_set_name nope-test-firmware.bin
 217         config_trigger_sync
 218         read_firmwares_expect_nofile
 219         release_all_firmware
 220         echo "OK"
 221 }
 222
 223 test_batched_request_firmware_direct_nofile()
 224 {
 225         echo -n "Batched request_firmware_direct() nofile try #$1: "
 226         config_reset
 227         config_set_name nope-test-firmware.bin
 228         config_set_sync_direct
 229         config_trigger_sync
 230         release_all_firmware
 231         echo "OK"
 232 }
 233
 234 test_request_firmware_nowait_uevent_nofile()
 235 {
 236         echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
 237         config_reset
 238         config_set_name nope-test-firmware.bin
 239         config_trigger_async
 240         release_all_firmware
 241         echo "OK"
 242 }
 243
 244 test_wait_and_cancel_custom_load()
 245 {
 246         if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
 247                 return
 248         fi
 249         local timeout=10
 250         name=$1
 251         while [ ! -e "$DIR"/"$name"/loading ]; do
 252                 sleep 0.1
 253                 timeout=$(( $timeout - 1 ))
 254                 if [ "$timeout" -eq 0 ]; then
 255                         echo "firmware interface never appeared:" >&2
 256                         echo "$DIR/$name/loading" >&2
 257                         exit 1
 258                 fi
 259         done
 260         echo -1 >"$DIR"/"$name"/loading
 261 }
 262
 263 test_request_firmware_nowait_custom_nofile()
 264 {
 265         echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
 266         config_unset_uevent
 267         config_set_name nope-test-firmware.bin
 268         config_trigger_async &
 269         test_wait_and_cancel_custom_load nope-test-firmware.bin
 270         wait
 271         release_all_firmware
 272         echo "OK"
 273 }
 274
 275 test_batched_request_firmware()
 276 {
 277         echo -n "Batched request_firmware() try #$1: "
 278         config_reset
 279         config_trigger_sync
 280         read_firmwares
 281         release_all_firmware
 282         echo "OK"
 283 }
 284
 285 test_batched_request_firmware_direct()
 286 {
 287         echo -n "Batched request_firmware_direct() try #$1: "
 288         config_reset
 289         config_set_sync_direct
 290         config_trigger_sync
 291         release_all_firmware
 292         echo "OK"
 293 }
 294
 295 test_request_firmware_nowait_uevent()
 296 {
 297         echo -n "Batched request_firmware_nowait(uevent=true) try #$1: "
 298         config_reset
 299         config_trigger_async
 300         release_all_firmware
 301         echo "OK"
 302 }
 303
 304 test_request_firmware_nowait_custom()
 305 {
 306         echo -n "Batched request_firmware_nowait(uevent=false) try #$1: "
 307         config_unset_uevent
 308         config_trigger_async
 309         release_all_firmware
 310         echo "OK"
 311 }
 312
 313 # Only continue if batched request triggers are present on the
 314 # test-firmware driver
 315 test_config_present
 316
 317 # test with the file present
 318 echo
 319 echo "Testing with the file present..."
 320 for i in $(seq 1 5); do
 321         test_batched_request_firmware $i
 322 done
 323
 324 for i in $(seq 1 5); do
 325         test_batched_request_firmware_direct $i
 326 done
 327
 328 for i in $(seq 1 5); do
 329         test_request_firmware_nowait_uevent $i
 330 done
 331
 332 for i in $(seq 1 5); do
 333         test_request_firmware_nowait_custom $i
 334 done
 335
 336 # Test for file not found, errors are expected, the failure would be
 337 # a hung task, which would require a hard reset.
 338 echo
 339 echo "Testing with the file missing..."
 340 for i in $(seq 1 5); do
 341         test_batched_request_firmware_nofile $i
 342 done
 343
 344 for i in $(seq 1 5); do
 345         test_batched_request_firmware_direct_nofile $i
 346 done
 347
 348 for i in $(seq 1 5); do
 349         test_request_firmware_nowait_uevent_nofile $i
 350 done
 351
 352 for i in $(seq 1 5); do
 353         test_request_firmware_nowait_custom_nofile $i
 354 done
 355
 356 exit 0