Linux 6.9-rc6
[sfrench/cifs-2.6.git] / sound / mips / hal2.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 #ifndef __HAL2_H
3 #define __HAL2_H
4
5 /*
6  *  Driver for HAL2 sound processors
7  *  Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se>
8  *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
9  */
10
11 #include <linux/types.h>
12
13 /* Indirect status register */
14
15 #define H2_ISR_TSTATUS          0x01    /* RO: transaction status 1=busy */
16 #define H2_ISR_USTATUS          0x02    /* RO: utime status bit 1=armed */
17 #define H2_ISR_QUAD_MODE        0x04    /* codec mode 0=indigo 1=quad */
18 #define H2_ISR_GLOBAL_RESET_N   0x08    /* chip global reset 0=reset */
19 #define H2_ISR_CODEC_RESET_N    0x10    /* codec/synth reset 0=reset  */
20
21 /* Revision register */
22
23 #define H2_REV_AUDIO_PRESENT    0x8000  /* RO: audio present 0=present */
24 #define H2_REV_BOARD_M          0x7000  /* RO: bits 14:12, board revision */
25 #define H2_REV_MAJOR_CHIP_M     0x00F0  /* RO: bits 7:4, major chip revision */
26 #define H2_REV_MINOR_CHIP_M     0x000F  /* RO: bits 3:0, minor chip revision */
27
28 /* Indirect address register */
29
30 /*
31  * Address of indirect internal register to be accessed. A write to this
32  * register initiates read or write access to the indirect registers in the
33  * HAL2. Note that there af four indirect data registers for write access to
34  * registers larger than 16 byte.
35  */
36
37 #define H2_IAR_TYPE_M           0xF000  /* bits 15:12, type of functional */
38                                         /* block the register resides in */
39                                         /* 1=DMA Port */
40                                         /* 9=Global DMA Control */
41                                         /* 2=Bresenham */
42                                         /* 3=Unix Timer */
43 #define H2_IAR_NUM_M            0x0F00  /* bits 11:8 instance of the */
44                                         /* blockin which the indirect */
45                                         /* register resides */
46                                         /* If IAR_TYPE_M=DMA Port: */
47                                         /* 1=Synth In */
48                                         /* 2=AES In */
49                                         /* 3=AES Out */
50                                         /* 4=DAC Out */
51                                         /* 5=ADC Out */
52                                         /* 6=Synth Control */
53                                         /* If IAR_TYPE_M=Global DMA Control: */
54                                         /* 1=Control */
55                                         /* If IAR_TYPE_M=Bresenham: */
56                                         /* 1=Bresenham Clock Gen 1 */
57                                         /* 2=Bresenham Clock Gen 2 */
58                                         /* 3=Bresenham Clock Gen 3 */
59                                         /* If IAR_TYPE_M=Unix Timer: */
60                                         /* 1=Unix Timer */
61 #define H2_IAR_ACCESS_SELECT    0x0080  /* 1=read 0=write */
62 #define H2_IAR_PARAM            0x000C  /* Parameter Select */
63 #define H2_IAR_RB_INDEX_M       0x0003  /* Read Back Index */
64                                         /* 00:word0 */
65                                         /* 01:word1 */
66                                         /* 10:word2 */
67                                         /* 11:word3 */
68 /*
69  * HAL2 internal addressing
70  *
71  * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
72  * Indirect Data registers. Write the address to the Indirect Address register
73  * to transfer the data.
74  *
75  * We define the H2IR_* to the read address and H2IW_* to the write address and
76  * H2I_* to be fields in whatever register is referred to.
77  *
78  * When we write to indirect registers which are larger than one word (16 bit)
79  * we have to fill more than one indirect register before writing. When we read
80  * back however we have to read several times, each time with different Read
81  * Back Indexes (there are defs for doing this easily).
82  */
83
84 /*
85  * Relay Control
86  */
87 #define H2I_RELAY_C             0x9100
88 #define H2I_RELAY_C_STATE       0x01            /* state of RELAY pin signal */
89
90 /* DMA port enable */
91
92 #define H2I_DMA_PORT_EN         0x9104
93 #define H2I_DMA_PORT_EN_SY_IN   0x01            /* Synth_in DMA port */
94 #define H2I_DMA_PORT_EN_AESRX   0x02            /* AES receiver DMA port */
95 #define H2I_DMA_PORT_EN_AESTX   0x04            /* AES transmitter DMA port */
96 #define H2I_DMA_PORT_EN_CODECTX 0x08            /* CODEC transmit DMA port */
97 #define H2I_DMA_PORT_EN_CODECR  0x10            /* CODEC receive DMA port */
98
99 #define H2I_DMA_END             0x9108          /* global dma endian select */
100 #define H2I_DMA_END_SY_IN       0x01            /* Synth_in DMA port */
101 #define H2I_DMA_END_AESRX       0x02            /* AES receiver DMA port */
102 #define H2I_DMA_END_AESTX       0x04            /* AES transmitter DMA port */
103 #define H2I_DMA_END_CODECTX     0x08            /* CODEC transmit DMA port */
104 #define H2I_DMA_END_CODECR      0x10            /* CODEC receive DMA port */
105                                                 /* 0=b_end 1=l_end */
106
107 #define H2I_DMA_DRV             0x910C          /* global PBUS DMA enable */
108
109 #define H2I_SYNTH_C             0x1104          /* Synth DMA control */
110
111 #define H2I_AESRX_C             0x1204          /* AES RX dma control */
112
113 #define H2I_C_TS_EN             0x20            /* Timestamp enable */
114 #define H2I_C_TS_FRMT           0x40            /* Timestamp format */
115 #define H2I_C_NAUDIO            0x80            /* Sign extend */
116
117 /* AESRX CTL, 16 bit */
118
119 #define H2I_AESTX_C             0x1304          /* AES TX DMA control */
120 #define H2I_AESTX_C_CLKID_SHIFT 3               /* Bresenham Clock Gen 1-3 */
121 #define H2I_AESTX_C_CLKID_M     0x18
122 #define H2I_AESTX_C_DATAT_SHIFT 8               /* 1=mono 2=stereo (3=quad) */
123 #define H2I_AESTX_C_DATAT_M     0x300
124
125 /* CODEC registers */
126
127 #define H2I_DAC_C1              0x1404          /* DAC DMA control, 16 bit */
128 #define H2I_DAC_C2              0x1408          /* DAC DMA control, 32 bit */
129 #define H2I_ADC_C1              0x1504          /* ADC DMA control, 16 bit */
130 #define H2I_ADC_C2              0x1508          /* ADC DMA control, 32 bit */
131
132 /* Bits in CTL1 register */
133
134 #define H2I_C1_DMA_SHIFT        0               /* DMA channel */
135 #define H2I_C1_DMA_M            0x7
136 #define H2I_C1_CLKID_SHIFT      3               /* Bresenham Clock Gen 1-3 */
137 #define H2I_C1_CLKID_M          0x18
138 #define H2I_C1_DATAT_SHIFT      8               /* 1=mono 2=stereo (3=quad) */
139 #define H2I_C1_DATAT_M          0x300
140
141 /* Bits in CTL2 register */
142
143 #define H2I_C2_R_GAIN_SHIFT     0               /* right a/d input gain */
144 #define H2I_C2_R_GAIN_M         0xf
145 #define H2I_C2_L_GAIN_SHIFT     4               /* left a/d input gain */
146 #define H2I_C2_L_GAIN_M         0xf0
147 #define H2I_C2_R_SEL            0x100           /* right input select */
148 #define H2I_C2_L_SEL            0x200           /* left input select */
149 #define H2I_C2_MUTE             0x400           /* mute */
150 #define H2I_C2_DO1              0x00010000      /* digital output port bit 0 */
151 #define H2I_C2_DO2              0x00020000      /* digital output port bit 1 */
152 #define H2I_C2_R_ATT_SHIFT      18              /* right d/a output - */
153 #define H2I_C2_R_ATT_M          0x007c0000      /* attenuation */
154 #define H2I_C2_L_ATT_SHIFT      23              /* left d/a output - */
155 #define H2I_C2_L_ATT_M          0x0f800000      /* attenuation */
156
157 #define H2I_SYNTH_MAP_C         0x1104          /* synth dma handshake ctrl */
158
159 /* Clock generator CTL 1, 16 bit */
160
161 #define H2I_BRES1_C1            0x2104
162 #define H2I_BRES2_C1            0x2204
163 #define H2I_BRES3_C1            0x2304
164
165 #define H2I_BRES_C1_SHIFT       0               /* 0=48.0 1=44.1 2=aes_rx */
166 #define H2I_BRES_C1_M           0x03
167
168 /* Clock generator CTL 2, 32 bit */
169
170 #define H2I_BRES1_C2            0x2108
171 #define H2I_BRES2_C2            0x2208
172 #define H2I_BRES3_C2            0x2308
173
174 #define H2I_BRES_C2_INC_SHIFT   0               /* increment value */
175 #define H2I_BRES_C2_INC_M       0xffff
176 #define H2I_BRES_C2_MOD_SHIFT   16              /* modcontrol value */
177 #define H2I_BRES_C2_MOD_M       0xffff0000      /* modctrl=0xffff&(modinc-1) */
178
179 /* Unix timer, 64 bit */
180
181 #define H2I_UTIME               0x3104
182 #define H2I_UTIME_0_LD          0xffff          /* microseconds, LSB's */
183 #define H2I_UTIME_1_LD0         0x0f            /* microseconds, MSB's */
184 #define H2I_UTIME_1_LD1         0xf0            /* tenths of microseconds */
185 #define H2I_UTIME_2_LD          0xffff          /* seconds, LSB's */
186 #define H2I_UTIME_3_LD          0xffff          /* seconds, MSB's */
187
188 struct hal2_ctl_regs {
189         u32 _unused0[4];
190         u32 isr;                /* 0x10 Status Register */
191         u32 _unused1[3];
192         u32 rev;                /* 0x20 Revision Register */
193         u32 _unused2[3];
194         u32 iar;                /* 0x30 Indirect Address Register */
195         u32 _unused3[3];
196         u32 idr0;               /* 0x40 Indirect Data Register 0 */
197         u32 _unused4[3];
198         u32 idr1;               /* 0x50 Indirect Data Register 1 */
199         u32 _unused5[3];
200         u32 idr2;               /* 0x60 Indirect Data Register 2 */
201         u32 _unused6[3];
202         u32 idr3;               /* 0x70 Indirect Data Register 3 */
203 };
204
205 struct hal2_aes_regs {
206         u32 rx_stat[2]; /* Status registers */
207         u32 rx_cr[2];           /* Control registers */
208         u32 rx_ud[4];           /* User data window */
209         u32 rx_st[24];          /* Channel status data */
210
211         u32 tx_stat[1]; /* Status register */
212         u32 tx_cr[3];           /* Control registers */
213         u32 tx_ud[4];           /* User data window */
214         u32 tx_st[24];          /* Channel status data */
215 };
216
217 struct hal2_vol_regs {
218         u32 right;              /* Right volume */
219         u32 left;               /* Left volume */
220 };
221
222 struct hal2_syn_regs {
223         u32 _unused0[2];
224         u32 page;               /* DOC Page register */
225         u32 regsel;             /* DOC Register selection */
226         u32 dlow;               /* DOC Data low */
227         u32 dhigh;              /* DOC Data high */
228         u32 irq;                /* IRQ Status */
229         u32 dram;               /* DRAM Access */
230 };
231
232 #endif  /* __HAL2_H */