01c02cb76ea6b103582461183bfe1699ecd2d028
[sfrench/cifs-2.6.git] / include / scsi / scsi_device.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19
20 typedef __u64 __bitwise blist_flags_t;
21
22 #define SCSI_SENSE_BUFFERSIZE   96
23
24 struct scsi_mode_data {
25         __u32   length;
26         __u16   block_descriptor_length;
27         __u8    medium_type;
28         __u8    device_specific;
29         __u8    header_length;
30         __u8    longlba:1;
31 };
32
33 /*
34  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35  * (for the ascii descriptions) and the state model enforcer:
36  * scsi_lib:scsi_device_set_state().
37  */
38 enum scsi_device_state {
39         SDEV_CREATED = 1,       /* device created but not added to sysfs
40                                  * Only internal commands allowed (for inq) */
41         SDEV_RUNNING,           /* device properly configured
42                                  * All commands allowed */
43         SDEV_CANCEL,            /* beginning to delete device
44                                  * Only error handler commands allowed */
45         SDEV_DEL,               /* device deleted 
46                                  * no commands allowed */
47         SDEV_QUIESCE,           /* Device quiescent.  No block commands
48                                  * will be accepted, only specials (which
49                                  * originate in the mid-layer) */
50         SDEV_OFFLINE,           /* Device offlined (by error handling or
51                                  * user request */
52         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
53         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
54                                  * scsi commands from user or midlayer
55                                  * should be issued to the scsi
56                                  * lld. */
57         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
58 };
59
60 enum scsi_scan_mode {
61         SCSI_SCAN_INITIAL = 0,
62         SCSI_SCAN_RESCAN,
63         SCSI_SCAN_MANUAL,
64 };
65
66 enum scsi_device_event {
67         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
68         SDEV_EVT_INQUIRY_CHANGE_REPORTED,               /* 3F 03  UA reported */
69         SDEV_EVT_CAPACITY_CHANGE_REPORTED,              /* 2A 09  UA reported */
70         SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,       /* 38 07  UA reported */
71         SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,        /* 2A 01  UA reported */
72         SDEV_EVT_LUN_CHANGE_REPORTED,                   /* 3F 0E  UA reported */
73         SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,            /* 2A 06  UA reported */
74         SDEV_EVT_POWER_ON_RESET_OCCURRED,               /* 29 00  UA reported */
75
76         SDEV_EVT_FIRST          = SDEV_EVT_MEDIA_CHANGE,
77         SDEV_EVT_LAST           = SDEV_EVT_POWER_ON_RESET_OCCURRED,
78
79         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
80 };
81
82 struct scsi_event {
83         enum scsi_device_event  evt_type;
84         struct list_head        node;
85
86         /* put union of data structures, for non-simple event types,
87          * here
88          */
89 };
90
91 /**
92  * struct scsi_vpd - SCSI Vital Product Data
93  * @rcu: For kfree_rcu().
94  * @len: Length in bytes of @data.
95  * @data: VPD data as defined in various T10 SCSI standard documents.
96  */
97 struct scsi_vpd {
98         struct rcu_head rcu;
99         int             len;
100         unsigned char   data[];
101 };
102
103 enum scsi_vpd_parameters {
104         SCSI_VPD_HEADER_SIZE = 4,
105 };
106
107 struct scsi_device {
108         struct Scsi_Host *host;
109         struct request_queue *request_queue;
110
111         /* the next two are protected by the host->host_lock */
112         struct list_head    siblings;   /* list of all devices on this host */
113         struct list_head    same_target_siblings; /* just the devices sharing same target id */
114
115         struct sbitmap budget_map;
116         atomic_t device_blocked;        /* Device returned QUEUE_FULL. */
117
118         atomic_t restarts;
119         spinlock_t list_lock;
120         struct list_head starved_entry;
121         unsigned short queue_depth;     /* How deep of a queue we want */
122         unsigned short max_queue_depth; /* max queue depth */
123         unsigned short last_queue_full_depth; /* These two are used by */
124         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
125         unsigned long last_queue_full_time;     /* last queue full time */
126         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
127 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
128
129         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
130
131         unsigned int id, channel;
132         u64 lun;
133         unsigned int manufacturer;      /* Manufacturer of device, for using 
134                                          * vendor-specific cmd's */
135         unsigned sector_size;   /* size in bytes */
136
137         void *hostdata;         /* available to low-level driver */
138         unsigned char type;
139         char scsi_level;
140         char inq_periph_qual;   /* PQ from INQUIRY data */      
141         struct mutex inquiry_mutex;
142         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
143         unsigned char * inquiry;        /* INQUIRY response data */
144         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
145         const char * model;             /* ... after scan; point to static string */
146         const char * rev;               /* ... "nullnullnullnull" before scan */
147
148 #define SCSI_DEFAULT_VPD_LEN    255     /* default SCSI VPD page size (max) */
149         struct scsi_vpd __rcu *vpd_pg0;
150         struct scsi_vpd __rcu *vpd_pg83;
151         struct scsi_vpd __rcu *vpd_pg80;
152         struct scsi_vpd __rcu *vpd_pg89;
153         struct scsi_vpd __rcu *vpd_pgb0;
154         struct scsi_vpd __rcu *vpd_pgb1;
155         struct scsi_vpd __rcu *vpd_pgb2;
156
157         struct scsi_target      *sdev_target;
158
159         blist_flags_t           sdev_bflags; /* black/white flags as also found in
160                                  * scsi_devinfo.[hc]. For now used only to
161                                  * pass settings from slave_alloc to scsi
162                                  * core. */
163         unsigned int eh_timeout; /* Error handling timeout */
164
165         /*
166          * If true, let the high-level device driver (sd) manage the device
167          * power state for system suspend/resume (suspend to RAM and
168          * hibernation) operations.
169          */
170         unsigned manage_system_start_stop:1;
171
172         /*
173          * If true, let the high-level device driver (sd) manage the device
174          * power state for runtime device suspand and resume operations.
175          */
176         unsigned manage_runtime_start_stop:1;
177
178         /*
179          * If true, let the high-level device driver (sd) manage the device
180          * power state for system shutdown (power off) operations.
181          */
182         unsigned manage_shutdown:1;
183
184         /*
185          * If set and if the device is runtime suspended, ask the high-level
186          * device driver (sd) to force a runtime resume of the device.
187          */
188         unsigned force_runtime_start_on_system_start:1;
189
190         unsigned removable:1;
191         unsigned changed:1;     /* Data invalid due to media change */
192         unsigned busy:1;        /* Used to prevent races */
193         unsigned lockable:1;    /* Able to prevent media removal */
194         unsigned locked:1;      /* Media removal disabled */
195         unsigned borken:1;      /* Tell the Seagate driver to be 
196                                  * painfully slow on this device */
197         unsigned disconnect:1;  /* can disconnect */
198         unsigned soft_reset:1;  /* Uses soft reset option */
199         unsigned sdtr:1;        /* Device supports SDTR messages */
200         unsigned wdtr:1;        /* Device supports WDTR messages */
201         unsigned ppr:1;         /* Device supports PPR messages */
202         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
203         unsigned simple_tags:1; /* simple queue tag messages are enabled */
204         unsigned was_reset:1;   /* There was a bus reset on the bus for 
205                                  * this device */
206         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
207                                      * because we did a bus reset. */
208         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
209         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
210         unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
211         unsigned read_before_ms:1;      /* perform a READ before MODE SENSE */
212         unsigned no_report_opcodes:1;   /* no REPORT SUPPORTED OPERATION CODES */
213         unsigned no_write_same:1;       /* no WRITE SAME command */
214         unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
215         unsigned use_16_for_sync:1;     /* Use sync (16) over sync (10) */
216         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
217         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
218         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
219         unsigned try_vpd_pages:1;       /* attempt to read VPD pages */
220         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
221         unsigned no_start_on_add:1;     /* do not issue start on add */
222         unsigned allow_restart:1; /* issue START_UNIT in error handler */
223         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
224         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
225         unsigned select_no_atn:1;
226         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
227         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
228         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
229         unsigned last_sector_bug:1;     /* do not use multisector accesses on
230                                            SD_LAST_BUGGY_SECTORS */
231         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
232         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
233         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
234         unsigned security_supported:1;  /* Supports Security Protocols */
235         unsigned is_visible:1;  /* is the device visible in sysfs */
236         unsigned wce_default_on:1;      /* Cache is ON by default */
237         unsigned no_dif:1;      /* T10 PI (DIF) should be disabled */
238         unsigned broken_fua:1;          /* Don't set FUA bit */
239         unsigned lun_in_cdb:1;          /* Store LUN bits in CDB[1] */
240         unsigned unmap_limit_for_ws:1;  /* Use the UNMAP limit for WRITE SAME */
241         unsigned rpm_autosuspend:1;     /* Enable runtime autosuspend at device
242                                          * creation time */
243         unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
244         unsigned silence_suspend:1;     /* Do not print runtime PM related messages */
245         unsigned no_vpd_size:1;         /* No VPD size reported in header */
246
247         unsigned cdl_supported:1;       /* Command duration limits supported */
248         unsigned cdl_enable:1;          /* Enable/disable Command duration limits */
249
250         unsigned int queue_stopped;     /* request queue is quiesced */
251         bool offline_already;           /* Device offline message logged */
252
253         atomic_t disk_events_disable_depth; /* disable depth for disk events */
254
255         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
256         DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
257         struct list_head event_list;    /* asserted events */
258         struct work_struct event_work;
259
260         unsigned int max_device_blocked; /* what device_blocked counts down from  */
261 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
262
263         atomic_t iorequest_cnt;
264         atomic_t iodone_cnt;
265         atomic_t ioerr_cnt;
266         atomic_t iotmo_cnt;
267
268         struct device           sdev_gendev,
269                                 sdev_dev;
270
271         struct work_struct      requeue_work;
272
273         struct scsi_device_handler *handler;
274         void                    *handler_data;
275
276         size_t                  dma_drain_len;
277         void                    *dma_drain_buf;
278
279         unsigned int            sg_timeout;
280         unsigned int            sg_reserved_size;
281
282         struct bsg_device       *bsg_dev;
283         unsigned char           access_state;
284         struct mutex            state_mutex;
285         enum scsi_device_state sdev_state;
286         struct task_struct      *quiesced_by;
287         unsigned long           sdev_data[];
288 } __attribute__((aligned(sizeof(unsigned long))));
289
290 #define to_scsi_device(d)       \
291         container_of(d, struct scsi_device, sdev_gendev)
292 #define class_to_sdev(d)        \
293         container_of(d, struct scsi_device, sdev_dev)
294 #define transport_class_to_sdev(class_dev) \
295         to_scsi_device(class_dev->parent)
296
297 #define sdev_dbg(sdev, fmt, a...) \
298         dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
299
300 /*
301  * like scmd_printk, but the device name is passed in
302  * as a string pointer
303  */
304 __printf(4, 5) void
305 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
306                 const char *, ...);
307
308 #define sdev_printk(l, sdev, fmt, a...)                         \
309         sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
310
311 __printf(3, 4) void
312 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
313
314 #define scmd_dbg(scmd, fmt, a...)                                       \
315         do {                                                            \
316                 struct request *__rq = scsi_cmd_to_rq((scmd));          \
317                                                                         \
318                 if (__rq->q->disk)                                      \
319                         sdev_dbg((scmd)->device, "[%s] " fmt,           \
320                                  __rq->q->disk->disk_name, ##a);        \
321                 else                                                    \
322                         sdev_dbg((scmd)->device, fmt, ##a);             \
323         } while (0)
324
325 enum scsi_target_state {
326         STARGET_CREATED = 1,
327         STARGET_RUNNING,
328         STARGET_REMOVE,
329         STARGET_CREATED_REMOVE,
330         STARGET_DEL,
331 };
332
333 /*
334  * scsi_target: representation of a scsi target, for now, this is only
335  * used for single_lun devices. If no one has active IO to the target,
336  * starget_sdev_user is NULL, else it points to the active sdev.
337  */
338 struct scsi_target {
339         struct scsi_device      *starget_sdev_user;
340         struct list_head        siblings;
341         struct list_head        devices;
342         struct device           dev;
343         struct kref             reap_ref; /* last put renders target invisible */
344         unsigned int            channel;
345         unsigned int            id; /* target id ... replace
346                                      * scsi_device.id eventually */
347         unsigned int            create:1; /* signal that it needs to be added */
348         unsigned int            single_lun:1;   /* Indicates we should only
349                                                  * allow I/O to one of the luns
350                                                  * for the device at a time. */
351         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
352                                                  * means no lun present. */
353         unsigned int            no_report_luns:1;       /* Don't use
354                                                  * REPORT LUNS for scanning. */
355         unsigned int            expecting_lun_change:1; /* A device has reported
356                                                  * a 3F/0E UA, other devices on
357                                                  * the same target will also. */
358         /* commands actually active on LLD. */
359         atomic_t                target_busy;
360         atomic_t                target_blocked;
361
362         /*
363          * LLDs should set this in the slave_alloc host template callout.
364          * If set to zero then there is not limit.
365          */
366         unsigned int            can_queue;
367         unsigned int            max_target_blocked;
368 #define SCSI_DEFAULT_TARGET_BLOCKED     3
369
370         char                    scsi_level;
371         enum scsi_target_state  state;
372         void                    *hostdata; /* available to low-level driver */
373         unsigned long           starget_data[]; /* for the transport */
374         /* starget_data must be the last element!!!! */
375 } __attribute__((aligned(sizeof(unsigned long))));
376
377 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
378 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
379 {
380         return to_scsi_target(sdev->sdev_gendev.parent);
381 }
382 #define transport_class_to_starget(class_dev) \
383         to_scsi_target(class_dev->parent)
384
385 #define starget_printk(prefix, starget, fmt, a...)      \
386         dev_printk(prefix, &(starget)->dev, fmt, ##a)
387
388 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
389                 uint, uint, u64, void *hostdata);
390 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
391                            uint target, u64 lun);
392 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
393 extern void scsi_remove_device(struct scsi_device *);
394 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
395 void scsi_attach_vpd(struct scsi_device *sdev);
396 void scsi_cdl_check(struct scsi_device *sdev);
397 int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
398
399 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
400 extern int __must_check scsi_device_get(struct scsi_device *);
401 extern void scsi_device_put(struct scsi_device *);
402 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
403                                               uint, uint, u64);
404 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
405                                                 uint, uint, u64);
406 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
407                                                         u64);
408 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
409                                                           u64);
410 extern void starget_for_each_device(struct scsi_target *, void *,
411                      void (*fn)(struct scsi_device *, void *));
412 extern void __starget_for_each_device(struct scsi_target *, void *,
413                                       void (*fn)(struct scsi_device *,
414                                                  void *));
415
416 /* only exposed to implement shost_for_each_device */
417 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
418                                                   struct scsi_device *);
419
420 /**
421  * shost_for_each_device - iterate over all devices of a host
422  * @sdev: the &struct scsi_device to use as a cursor
423  * @shost: the &struct scsi_host to iterate over
424  *
425  * Iterator that returns each device attached to @shost.  This loop
426  * takes a reference on each device and releases it at the end.  If
427  * you break out of the loop, you must call scsi_device_put(sdev).
428  */
429 #define shost_for_each_device(sdev, shost) \
430         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
431              (sdev); \
432              (sdev) = __scsi_iterate_devices((shost), (sdev)))
433
434 /**
435  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
436  * @sdev: the &struct scsi_device to use as a cursor
437  * @shost: the &struct scsi_host to iterate over
438  *
439  * Iterator that returns each device attached to @shost.  It does _not_
440  * take a reference on the scsi_device, so the whole loop must be
441  * protected by shost->host_lock.
442  *
443  * Note: The only reason to use this is because you need to access the
444  * device list in interrupt context.  Otherwise you really want to use
445  * shost_for_each_device instead.
446  */
447 #define __shost_for_each_device(sdev, shost) \
448         list_for_each_entry((sdev), &((shost)->__devices), siblings)
449
450 extern int scsi_change_queue_depth(struct scsi_device *, int);
451 extern int scsi_track_queue_full(struct scsi_device *, int);
452
453 extern int scsi_set_medium_removal(struct scsi_device *, char);
454
455 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
456                     int subpage, unsigned char *buffer, int len, int timeout,
457                     int retries, struct scsi_mode_data *data,
458                     struct scsi_sense_hdr *);
459 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
460                             unsigned char *buffer, int len, int timeout,
461                             int retries, struct scsi_mode_data *data,
462                             struct scsi_sense_hdr *);
463 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
464                                 int retries, struct scsi_sense_hdr *sshdr);
465 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
466                              int buf_len);
467 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
468                        unsigned int len, unsigned char opcode,
469                        unsigned short sa);
470 extern int scsi_device_set_state(struct scsi_device *sdev,
471                                  enum scsi_device_state state);
472 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
473                                           gfp_t gfpflags);
474 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
475 extern void sdev_evt_send_simple(struct scsi_device *sdev,
476                           enum scsi_device_event evt_type, gfp_t gfpflags);
477 extern int scsi_device_quiesce(struct scsi_device *sdev);
478 extern void scsi_device_resume(struct scsi_device *sdev);
479 extern void scsi_target_quiesce(struct scsi_target *);
480 extern void scsi_target_resume(struct scsi_target *);
481 extern void scsi_scan_target(struct device *parent, unsigned int channel,
482                              unsigned int id, u64 lun,
483                              enum scsi_scan_mode rescan);
484 extern void scsi_target_reap(struct scsi_target *);
485 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev);
486 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
487 extern void scsi_remove_target(struct device *);
488 extern const char *scsi_device_state_name(enum scsi_device_state);
489 extern int scsi_is_sdev_device(const struct device *);
490 extern int scsi_is_target_device(const struct device *);
491 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
492
493 /* Optional arguments to scsi_execute_cmd */
494 struct scsi_exec_args {
495         unsigned char *sense;           /* sense buffer */
496         unsigned int sense_len;         /* sense buffer len */
497         struct scsi_sense_hdr *sshdr;   /* decoded sense header */
498         blk_mq_req_flags_t req_flags;   /* BLK_MQ_REQ flags */
499         int scmd_flags;                 /* SCMD flags */
500         int *resid;                     /* residual length */
501 };
502
503 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
504                      blk_opf_t opf, void *buffer, unsigned int bufflen,
505                      int timeout, int retries,
506                      const struct scsi_exec_args *args);
507
508 extern void sdev_disable_disk_events(struct scsi_device *sdev);
509 extern void sdev_enable_disk_events(struct scsi_device *sdev);
510 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
511 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
512
513 #ifdef CONFIG_PM
514 extern int scsi_autopm_get_device(struct scsi_device *);
515 extern void scsi_autopm_put_device(struct scsi_device *);
516 #else
517 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
518 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
519 #endif /* CONFIG_PM */
520
521 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
522 {
523         return device_reprobe(&sdev->sdev_gendev);
524 }
525
526 static inline unsigned int sdev_channel(struct scsi_device *sdev)
527 {
528         return sdev->channel;
529 }
530
531 static inline unsigned int sdev_id(struct scsi_device *sdev)
532 {
533         return sdev->id;
534 }
535
536 #define scmd_id(scmd) sdev_id((scmd)->device)
537 #define scmd_channel(scmd) sdev_channel((scmd)->device)
538
539 /*
540  * checks for positions of the SCSI state machine
541  */
542 static inline int scsi_device_online(struct scsi_device *sdev)
543 {
544         return (sdev->sdev_state != SDEV_OFFLINE &&
545                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
546                 sdev->sdev_state != SDEV_DEL);
547 }
548 static inline int scsi_device_blocked(struct scsi_device *sdev)
549 {
550         return sdev->sdev_state == SDEV_BLOCK ||
551                 sdev->sdev_state == SDEV_CREATED_BLOCK;
552 }
553 static inline int scsi_device_created(struct scsi_device *sdev)
554 {
555         return sdev->sdev_state == SDEV_CREATED ||
556                 sdev->sdev_state == SDEV_CREATED_BLOCK;
557 }
558
559 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
560 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
561                                         enum scsi_device_state new_state);
562
563 /* accessor functions for the SCSI parameters */
564 static inline int scsi_device_sync(struct scsi_device *sdev)
565 {
566         return sdev->sdtr;
567 }
568 static inline int scsi_device_wide(struct scsi_device *sdev)
569 {
570         return sdev->wdtr;
571 }
572 static inline int scsi_device_dt(struct scsi_device *sdev)
573 {
574         return sdev->ppr;
575 }
576 static inline int scsi_device_dt_only(struct scsi_device *sdev)
577 {
578         if (sdev->inquiry_len < 57)
579                 return 0;
580         return (sdev->inquiry[56] & 0x0c) == 0x04;
581 }
582 static inline int scsi_device_ius(struct scsi_device *sdev)
583 {
584         if (sdev->inquiry_len < 57)
585                 return 0;
586         return sdev->inquiry[56] & 0x01;
587 }
588 static inline int scsi_device_qas(struct scsi_device *sdev)
589 {
590         if (sdev->inquiry_len < 57)
591                 return 0;
592         return sdev->inquiry[56] & 0x02;
593 }
594 static inline int scsi_device_enclosure(struct scsi_device *sdev)
595 {
596         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
597 }
598
599 static inline int scsi_device_protection(struct scsi_device *sdev)
600 {
601         if (sdev->no_dif)
602                 return 0;
603
604         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
605 }
606
607 static inline int scsi_device_tpgs(struct scsi_device *sdev)
608 {
609         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
610 }
611
612 /**
613  * scsi_device_supports_vpd - test if a device supports VPD pages
614  * @sdev: the &struct scsi_device to test
615  *
616  * If the 'try_vpd_pages' flag is set it takes precedence.
617  * Otherwise we will assume VPD pages are supported if the
618  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
619  */
620 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
621 {
622         /* Attempt VPD inquiry if the device blacklist explicitly calls
623          * for it.
624          */
625         if (sdev->try_vpd_pages)
626                 return 1;
627         /*
628          * Although VPD inquiries can go to SCSI-2 type devices,
629          * some USB ones crash on receiving them, and the pages
630          * we currently ask for are mandatory for SPC-2 and beyond
631          */
632         if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
633                 return 1;
634         return 0;
635 }
636
637 static inline int scsi_device_busy(struct scsi_device *sdev)
638 {
639         return sbitmap_weight(&sdev->budget_map);
640 }
641
642 #define MODULE_ALIAS_SCSI_DEVICE(type) \
643         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
644 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
645
646 #endif /* _SCSI_SCSI_DEVICE_H */