License cleanup: add SPDX GPL-2.0 license identifier to files with no license
[sfrench/cifs-2.6.git] / arch / sh / boards / mach-se / 7343 / setup.c
1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/init.h>
3 #include <linux/platform_device.h>
4 #include <linux/mtd/physmap.h>
5 #include <linux/serial_8250.h>
6 #include <linux/serial_reg.h>
7 #include <linux/usb/isp116x.h>
8 #include <linux/delay.h>
9 #include <linux/irqdomain.h>
10 #include <asm/machvec.h>
11 #include <mach-se/mach/se7343.h>
12 #include <asm/heartbeat.h>
13 #include <asm/irq.h>
14 #include <asm/io.h>
15
16 static struct resource heartbeat_resource = {
17         .start  = PA_LED,
18         .end    = PA_LED,
19         .flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
20 };
21
22 static struct platform_device heartbeat_device = {
23         .name           = "heartbeat",
24         .id             = -1,
25         .num_resources  = 1,
26         .resource       = &heartbeat_resource,
27 };
28
29 static struct mtd_partition nor_flash_partitions[] = {
30         {
31                 .name           = "loader",
32                 .offset         = 0x00000000,
33                 .size           = 128 * 1024,
34         },
35         {
36                 .name           = "rootfs",
37                 .offset         = MTDPART_OFS_APPEND,
38                 .size           = 31 * 1024 * 1024,
39         },
40         {
41                 .name           = "data",
42                 .offset         = MTDPART_OFS_APPEND,
43                 .size           = MTDPART_SIZ_FULL,
44         },
45 };
46
47 static struct physmap_flash_data nor_flash_data = {
48         .width          = 2,
49         .parts          = nor_flash_partitions,
50         .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
51 };
52
53 static struct resource nor_flash_resources[] = {
54         [0]     = {
55                 .start  = 0x00000000,
56                 .end    = 0x01ffffff,
57                 .flags  = IORESOURCE_MEM,
58         }
59 };
60
61 static struct platform_device nor_flash_device = {
62         .name           = "physmap-flash",
63         .dev            = {
64                 .platform_data  = &nor_flash_data,
65         },
66         .num_resources  = ARRAY_SIZE(nor_flash_resources),
67         .resource       = nor_flash_resources,
68 };
69
70 #define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
71
72 static struct plat_serial8250_port serial_platform_data[] = {
73         [0] = {
74                 .iotype         = UPIO_MEM,
75                 .mapbase        = 0x16000000,
76                 .regshift       = 1,
77                 .flags          = ST16C2550C_FLAGS,
78                 .uartclk        = 7372800,
79         },
80         [1] = {
81                 .iotype         = UPIO_MEM,
82                 .mapbase        = 0x17000000,
83                 .regshift       = 1,
84                 .flags          = ST16C2550C_FLAGS,
85                 .uartclk        = 7372800,
86         },
87         { },
88 };
89
90 static struct platform_device uart_device = {
91         .name                   = "serial8250",
92         .id                     = PLAT8250_DEV_PLATFORM,
93         .dev                    = {
94                 .platform_data  = serial_platform_data,
95         },
96 };
97
98 static void isp116x_delay(struct device *dev, int delay)
99 {
100         ndelay(delay);
101 }
102
103 static struct resource usb_resources[] = {
104         [0] = {
105                 .start  = 0x11800000,
106                 .end    = 0x11800001,
107                 .flags  = IORESOURCE_MEM,
108         },
109         [1] = {
110                 .start  = 0x11800002,
111                 .end    = 0x11800003,
112                 .flags  = IORESOURCE_MEM,
113         },
114         [2] = {
115                 /* Filled in later */
116                 .flags  = IORESOURCE_IRQ,
117         },
118 };
119
120 static struct isp116x_platform_data usb_platform_data = {
121         .sel15Kres              = 1,
122         .oc_enable              = 1,
123         .int_act_high           = 0,
124         .int_edge_triggered     = 0,
125         .remote_wakeup_enable   = 0,
126         .delay                  = isp116x_delay,
127 };
128
129 static struct platform_device usb_device = {
130         .name                   = "isp116x-hcd",
131         .id                     = -1,
132         .num_resources          = ARRAY_SIZE(usb_resources),
133         .resource               = usb_resources,
134         .dev                    = {
135                 .platform_data  = &usb_platform_data,
136         },
137
138 };
139
140 static struct platform_device *sh7343se_platform_devices[] __initdata = {
141         &heartbeat_device,
142         &nor_flash_device,
143         &uart_device,
144         &usb_device,
145 };
146
147 static int __init sh7343se_devices_setup(void)
148 {
149         /* Wire-up dynamic vectors */
150         serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
151                                                        SE7343_FPGA_IRQ_UARTA);
152         serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
153                                                        SE7343_FPGA_IRQ_UARTB);
154         usb_resources[2].start = usb_resources[2].end =
155                 irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
156
157         return platform_add_devices(sh7343se_platform_devices,
158                                     ARRAY_SIZE(sh7343se_platform_devices));
159 }
160 device_initcall(sh7343se_devices_setup);
161
162 /*
163  * Initialize the board
164  */
165 static void __init sh7343se_setup(char **cmdline_p)
166 {
167         __raw_writew(0xf900, FPGA_OUT); /* FPGA */
168
169         __raw_writew(0x0002, PORT_PECR);        /* PORT E 1 = IRQ5 */
170         __raw_writew(0x0020, PORT_PSELD);
171
172         printk(KERN_INFO "MS7343CP01 Setup...done\n");
173 }
174
175 /*
176  * The Machine Vector
177  */
178 static struct sh_machine_vector mv_7343se __initmv = {
179         .mv_name = "SolutionEngine 7343",
180         .mv_setup = sh7343se_setup,
181         .mv_init_irq = init_7343se_IRQ,
182 };