arch/mips/boot/dts/brcm/bcm7346.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7346";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <163125000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips5000";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips5000";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23         };
  24
  25         aliases {
  26                 uart0 = &uart0;
  27         };
  28
  29         cpu_intc: interrupt-controller {
  30                 #address-cells = <0>;
  31                 compatible = "mti,cpu-interrupt-controller";
  32
  33                 interrupt-controller;
  34                 #interrupt-cells = <1>;
  35         };
  36
  37         clocks {
  38                 uart_clk: uart_clk {
  39                         compatible = "fixed-clock";
  40                         #clock-cells = <0>;
  41                         clock-frequency = <81000000>;
  42                 };
  43
  44                 upg_clk: upg_clk {
  45                         compatible = "fixed-clock";
  46                         #clock-cells = <0>;
  47                         clock-frequency = <27000000>;
  48                 };
  49         };
  50
  51         rdb {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54
  55                 compatible = "simple-bus";
  56                 ranges = <0 0x10000000 0x01000000>;
  57
  58                 periph_intc: interrupt-controller@411400 {
  59                         compatible = "brcm,bcm7038-l1-intc";
  60                         reg = <0x411400 0x30>, <0x411600 0x30>;
  61
  62                         interrupt-controller;
  63                         #interrupt-cells = <1>;
  64
  65                         interrupt-parent = <&cpu_intc>;
  66                         interrupts = <2>, <3>;
  67                 };
  68
  69                 sun_l2_intc: interrupt-controller@403000 {
  70                         compatible = "brcm,l2-intc";
  71                         reg = <0x403000 0x30>;
  72                         interrupt-controller;
  73                         #interrupt-cells = <1>;
  74                         interrupt-parent = <&periph_intc>;
  75                         interrupts = <51>;
  76                 };
  77
  78                 gisb-arb@400000 {
  79                         compatible = "brcm,bcm7400-gisb-arb";
  80                         reg = <0x400000 0xdc>;
  81                         native-endian;
  82                         interrupt-parent = <&sun_l2_intc>;
  83                         interrupts = <0>, <2>;
  84                         brcm,gisb-arb-master-mask = <0x673>;
  85                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
  86                                                      "rdc_0", "raaga_0",
  87                                                      "jtag_0", "svd_0";
  88                 };
  89
  90                 upg_irq0_intc: interrupt-controller@406780 {
  91                         compatible = "brcm,bcm7120-l2-intc";
  92                         reg = <0x406780 0x8>;
  93
  94                         brcm,int-map-mask = <0x44>, <0xf000000>;
  95                         brcm,int-fwd-mask = <0x70000>;
  96
  97                         interrupt-controller;
  98                         #interrupt-cells = <1>;
  99
 100                         interrupt-parent = <&periph_intc>;
 101                         interrupts = <59>, <57>;
 102                         interrupt-names = "upg_main", "upg_bsc";
 103                 };
 104
 105                 upg_aon_irq0_intc: interrupt-controller@408b80 {
 106                         compatible = "brcm,bcm7120-l2-intc";
 107                         reg = <0x408b80 0x8>;
 108
 109                         brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
 110                         brcm,int-fwd-mask = <0>;
 111                         brcm,irq-can-wake;
 112
 113                         interrupt-controller;
 114                         #interrupt-cells = <1>;
 115
 116                         interrupt-parent = <&periph_intc>;
 117                         interrupts = <60>, <58>, <62>;
 118                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 119                                           "upg_spi";
 120                 };
 121
 122                 sun_top_ctrl: syscon@404000 {
 123                         compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
 124                         reg = <0x404000 0x51c>;
 125                         native-endian;
 126                 };
 127
 128                 reboot {
 129                         compatible = "brcm,brcmstb-reboot";
 130                         syscon = <&sun_top_ctrl 0x304 0x308>;
 131                 };
 132
 133                 uart0: serial@406900 {
 134                         compatible = "ns16550a";
 135                         reg = <0x406900 0x20>;
 136                         reg-io-width = <0x4>;
 137                         reg-shift = <0x2>;
 138                         native-endian;
 139                         interrupt-parent = <&periph_intc>;
 140                         interrupts = <64>;
 141                         clocks = <&uart_clk>;
 142                         status = "disabled";
 143                 };
 144
 145                 uart1: serial@406940 {
 146                         compatible = "ns16550a";
 147                         reg = <0x406940 0x20>;
 148                         reg-io-width = <0x4>;
 149                         reg-shift = <0x2>;
 150                         native-endian;
 151                         interrupt-parent = <&periph_intc>;
 152                         interrupts = <65>;
 153                         clocks = <&uart_clk>;
 154                         status = "disabled";
 155                 };
 156
 157                 uart2: serial@406980 {
 158                         compatible = "ns16550a";
 159                         reg = <0x406980 0x20>;
 160                         reg-io-width = <0x4>;
 161                         reg-shift = <0x2>;
 162                         native-endian;
 163                         interrupt-parent = <&periph_intc>;
 164                         interrupts = <66>;
 165                         clocks = <&uart_clk>;
 166                         status = "disabled";
 167                 };
 168
 169                 bsca: i2c@406200 {
 170                       clock-frequency = <390000>;
 171                       compatible = "brcm,brcmstb-i2c";
 172                       interrupt-parent = <&upg_irq0_intc>;
 173                       reg = <0x406200 0x58>;
 174                       interrupts = <24>;
 175                       interrupt-names = "upg_bsca";
 176                       status = "disabled";
 177                 };
 178
 179                 bscb: i2c@406280 {
 180                       clock-frequency = <390000>;
 181                       compatible = "brcm,brcmstb-i2c";
 182                       interrupt-parent = <&upg_irq0_intc>;
 183                       reg = <0x406280 0x58>;
 184                       interrupts = <25>;
 185                       interrupt-names = "upg_bscb";
 186                       status = "disabled";
 187                 };
 188
 189                 bscc: i2c@406300 {
 190                       clock-frequency = <390000>;
 191                       compatible = "brcm,brcmstb-i2c";
 192                       interrupt-parent = <&upg_irq0_intc>;
 193                       reg = <0x406300 0x58>;
 194                       interrupts = <26>;
 195                       interrupt-names = "upg_bscc";
 196                       status = "disabled";
 197                 };
 198
 199                 bscd: i2c@406380 {
 200                       clock-frequency = <390000>;
 201                       compatible = "brcm,brcmstb-i2c";
 202                       interrupt-parent = <&upg_irq0_intc>;
 203                       reg = <0x406380 0x58>;
 204                       interrupts = <27>;
 205                       interrupt-names = "upg_bscd";
 206                       status = "disabled";
 207                 };
 208
 209                 bsce: i2c@408980 {
 210                       clock-frequency = <390000>;
 211                       compatible = "brcm,brcmstb-i2c";
 212                       interrupt-parent = <&upg_aon_irq0_intc>;
 213                       reg = <0x408980 0x58>;
 214                       interrupts = <27>;
 215                       interrupt-names = "upg_bsce";
 216                       status = "disabled";
 217                 };
 218
 219                 pwma: pwm@406580 {
 220                         compatible = "brcm,bcm7038-pwm";
 221                         reg = <0x406580 0x28>;
 222                         #pwm-cells = <2>;
 223                         clocks = <&upg_clk>;
 224                         status = "disabled";
 225                 };
 226
 227                 pwmb: pwm@406800 {
 228                         compatible = "brcm,bcm7038-pwm";
 229                         reg = <0x406800 0x28>;
 230                         #pwm-cells = <2>;
 231                         clocks = <&upg_clk>;
 232                         status = "disabled";
 233                 };
 234
 235                 aon_pm_l2_intc: interrupt-controller@408440 {
 236                         compatible = "brcm,l2-intc";
 237                         reg = <0x408440 0x30>;
 238                         interrupt-controller;
 239                         #interrupt-cells = <1>;
 240                         interrupt-parent = <&periph_intc>;
 241                         interrupts = <53>;
 242                         brcm,irq-can-wake;
 243                 };
 244
 245                 upg_gio: gpio@406700 {
 246                         compatible = "brcm,brcmstb-gpio";
 247                         reg = <0x406700 0x60>;
 248                         #gpio-cells = <2>;
 249                         #interrupt-cells = <2>;
 250                         gpio-controller;
 251                         interrupt-controller;
 252                         interrupt-parent = <&upg_irq0_intc>;
 253                         interrupts = <6>;
 254                         brcm,gpio-bank-widths = <32 32 16>;
 255                 };
 256
 257                 upg_gio_aon: gpio@408c00 {
 258                         compatible = "brcm,brcmstb-gpio";
 259                         reg = <0x408c00 0x60>;
 260                         #gpio-cells = <2>;
 261                         #interrupt-cells = <2>;
 262                         gpio-controller;
 263                         interrupt-controller;
 264                         interrupt-parent = <&upg_aon_irq0_intc>;
 265                         interrupts = <6>;
 266                         interrupts-extended = <&upg_aon_irq0_intc 6>,
 267                                               <&aon_pm_l2_intc 5>;
 268                         wakeup-source;
 269                         brcm,gpio-bank-widths = <27 32 2>;
 270                 };
 271
 272                 enet0: ethernet@430000 {
 273                         phy-mode = "internal";
 274                         phy-handle = <&phy1>;
 275                         mac-address = [ 00 10 18 36 23 1a ];
 276                         compatible = "brcm,genet-v2";
 277                         #address-cells = <0x1>;
 278                         #size-cells = <0x1>;
 279                         reg = <0x430000 0x4c8c>;
 280                         interrupts = <24>, <25>;
 281                         interrupt-parent = <&periph_intc>;
 282                         status = "disabled";
 283
 284                         mdio@e14 {
 285                                 compatible = "brcm,genet-mdio-v2";
 286                                 #address-cells = <0x1>;
 287                                 #size-cells = <0x0>;
 288                                 reg = <0xe14 0x8>;
 289
 290                                 phy1: ethernet-phy@1 {
 291                                         max-speed = <100>;
 292                                         reg = <0x1>;
 293                                         compatible = "brcm,40nm-ephy",
 294                                                 "ethernet-phy-ieee802.3-c22";
 295                                 };
 296                         };
 297                 };
 298
 299                 ehci0: usb@480300 {
 300                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 301                         reg = <0x480300 0x100>;
 302                         native-endian;
 303                         interrupt-parent = <&periph_intc>;
 304                         interrupts = <68>;
 305                         status = "disabled";
 306                 };
 307
 308                 ohci0: usb@480400 {
 309                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 310                         reg = <0x480400 0x100>;
 311                         native-endian;
 312                         no-big-frame-no;
 313                         interrupt-parent = <&periph_intc>;
 314                         interrupts = <70>;
 315                         status = "disabled";
 316                 };
 317
 318                 ehci1: usb@480500 {
 319                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 320                         reg = <0x480500 0x100>;
 321                         native-endian;
 322                         interrupt-parent = <&periph_intc>;
 323                         interrupts = <69>;
 324                         status = "disabled";
 325                 };
 326
 327                 ohci1: usb@480600 {
 328                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 329                         reg = <0x480600 0x100>;
 330                         native-endian;
 331                         no-big-frame-no;
 332                         interrupt-parent = <&periph_intc>;
 333                         interrupts = <71>;
 334                         status = "disabled";
 335                 };
 336
 337                 ehci2: usb@490300 {
 338                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 339                         reg = <0x490300 0x100>;
 340                         native-endian;
 341                         interrupt-parent = <&periph_intc>;
 342                         interrupts = <73>;
 343                         status = "disabled";
 344                 };
 345
 346                 ohci2: usb@490400 {
 347                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 348                         reg = <0x490400 0x100>;
 349                         native-endian;
 350                         no-big-frame-no;
 351                         interrupt-parent = <&periph_intc>;
 352                         interrupts = <75>;
 353                         status = "disabled";
 354                 };
 355
 356                 ehci3: usb@490500 {
 357                         compatible = "brcm,bcm7346-ehci", "generic-ehci";
 358                         reg = <0x490500 0x100>;
 359                         native-endian;
 360                         interrupt-parent = <&periph_intc>;
 361                         interrupts = <74>;
 362                         status = "disabled";
 363                 };
 364
 365                 ohci3: usb@490600 {
 366                         compatible = "brcm,bcm7346-ohci", "generic-ohci";
 367                         reg = <0x490600 0x100>;
 368                         native-endian;
 369                         no-big-frame-no;
 370                         interrupt-parent = <&periph_intc>;
 371                         interrupts = <76>;
 372                         status = "disabled";
 373                 };
 374
 375                 hif_l2_intc: interrupt-controller@411000 {
 376                         compatible = "brcm,l2-intc";
 377                         reg = <0x411000 0x30>;
 378                         interrupt-controller;
 379                         #interrupt-cells = <1>;
 380                         interrupt-parent = <&periph_intc>;
 381                         interrupts = <30>;
 382                 };
 383
 384                 nand: nand@412800 {
 385                         compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
 386                         #address-cells = <1>;
 387                         #size-cells = <0>;
 388                         reg-names = "nand";
 389                         reg = <0x412800 0x400>;
 390                         interrupt-parent = <&hif_l2_intc>;
 391                         interrupts = <24>;
 392                         status = "disabled";
 393                 };
 394
 395                 sata: sata@181000 {
 396                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 397                         reg-names = "ahci", "top-ctrl";
 398                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 399                         interrupt-parent = <&periph_intc>;
 400                         interrupts = <40>;
 401                         #address-cells = <1>;
 402                         #size-cells = <0>;
 403                         status = "disabled";
 404
 405                         sata0: sata-port@0 {
 406                                 reg = <0>;
 407                                 phys = <&sata_phy0>;
 408                         };
 409
 410                         sata1: sata-port@1 {
 411                                 reg = <1>;
 412                                 phys = <&sata_phy1>;
 413                         };
 414                 };
 415
 416                 sata_phy: sata-phy@180100 {
 417                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 418                         reg = <0x180100 0x0eff>;
 419                         reg-names = "phy";
 420                         #address-cells = <1>;
 421                         #size-cells = <0>;
 422                         status = "disabled";
 423
 424                         sata_phy0: sata-phy@0 {
 425                                 reg = <0>;
 426                                 #phy-cells = <0>;
 427                         };
 428
 429                         sata_phy1: sata-phy@1 {
 430                                 reg = <1>;
 431                                 #phy-cells = <0>;
 432                         };
 433                 };
 434
 435                 sdhci0: sdhci@413500 {
 436                         compatible = "brcm,bcm7425-sdhci";
 437                         reg = <0x413500 0x100>;
 438                         interrupt-parent = <&periph_intc>;
 439                         interrupts = <85>;
 440                         status = "disabled";
 441                 };
 442
 443                 spi_l2_intc: interrupt-controller@411d00 {
 444                         compatible = "brcm,l2-intc";
 445                         reg = <0x411d00 0x30>;
 446                         interrupt-controller;
 447                         #interrupt-cells = <1>;
 448                         interrupt-parent = <&periph_intc>;
 449                         interrupts = <31>;
 450                 };
 451
 452                 qspi: spi@413000 {
 453                         #address-cells = <0x1>;
 454                         #size-cells = <0x0>;
 455                         compatible = "brcm,spi-bcm-qspi",
 456                                      "brcm,spi-brcmstb-qspi";
 457                         clocks = <&upg_clk>;
 458                         reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
 459                         reg-names = "cs_reg", "hif_mspi", "bspi";
 460                         interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
 461                         interrupt-parent = <&spi_l2_intc>;
 462                         interrupt-names = "spi_lr_fullness_reached",
 463                                           "spi_lr_session_aborted",
 464                                           "spi_lr_impatient",
 465                                           "spi_lr_session_done",
 466                                           "spi_lr_overread",
 467                                           "mspi_done",
 468                                           "mspi_halted";
 469                         status = "disabled";
 470                 };
 471
 472                 mspi: spi@408a00 {
 473                         #address-cells = <1>;
 474                         #size-cells = <0>;
 475                         compatible = "brcm,spi-bcm-qspi",
 476                                      "brcm,spi-brcmstb-mspi";
 477                         clocks = <&upg_clk>;
 478                         reg = <0x408a00 0x180>;
 479                         reg-names = "mspi";
 480                         interrupts = <0x14>;
 481                         interrupt-parent = <&upg_aon_irq0_intc>;
 482                         interrupt-names = "mspi_done";
 483                         status = "disabled";
 484                 };
 485         };
 486 };