arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sm6125.dtsi"
   9 #include "pm6125.dtsi"
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/input/gpio-keys.h>
  12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
  13
  14 / {
  15         /* required for bootloader to select correct board */
  16         qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
  17         qcom,board-id = <34 0>;
  18
  19         model = "Sony Xperia 10 II";
  20         compatible = "sony,pdx201", "qcom,sm6125";
  21         chassis-type = "handset";
  22
  23         aliases {
  24                 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
  25                 mmc1 = &sdhc_2; /* SDC2 SD card slot */
  26         };
  27
  28         chosen {
  29                 #address-cells = <2>;
  30                 #size-cells = <2>;
  31                 ranges;
  32
  33                 framebuffer0: framebuffer@5c000000 {
  34                         compatible = "simple-framebuffer";
  35                         reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
  36                         width = <1080>;
  37                         height = <2520>;
  38                         stride = <(1080 * 4)>;
  39                         format = "a8r8g8b8";
  40                 };
  41         };
  42
  43         extcon_usb: extcon-usb {
  44                 compatible = "linux,extcon-usb-gpio";
  45                 id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
  46         };
  47
  48         gpio-keys {
  49                 compatible = "gpio-keys";
  50
  51                 pinctrl-0 = <&vol_down_n>;
  52                 pinctrl-names = "default";
  53
  54                 key-volume-down {
  55                         label = "Volume Down";
  56                         gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_VOLUMEDOWN>;
  58                         debounce-interval = <15>;
  59                         linux,can-disable;
  60                         wakeup-source;
  61                 };
  62         };
  63
  64         reserved-memory {
  65                 #address-cells = <2>;
  66                 #size-cells = <2>;
  67                 debug_mem: memory@ffb00000 {
  68                         reg = <0x0 0xffb00000 0x0 0xc0000>;
  69                         no-map;
  70                 };
  71
  72                 last_log_mem: memory@ffbc0000 {
  73                         reg = <0x0 0xffbc0000 0x0 0x80000>;
  74                         no-map;
  75                 };
  76
  77                 pstore_mem: ramoops@ffc00000 {
  78                         compatible = "ramoops";
  79                         reg = <0x0 0xffc40000 0x0 0xc0000>;
  80                         record-size = <0x1000>;
  81                         console-size = <0x40000>;
  82                         pmsg-size = <0x20000>;
  83                 };
  84
  85                 cmdline_mem: memory@ffd00000 {
  86                         reg = <0x0 0xffd40000 0x0 0x1000>;
  87                         no-map;
  88                 };
  89         };
  90
  91         thermal-zones {
  92                 rf-pa0-thermal {
  93                         polling-delay-passive = <0>;
  94                         polling-delay = <0>;
  95                         thermal-sensors = <&pm6125_adc_tm 0>;
  96
  97                         trips {
  98                                 active-config0 {
  99                                         temperature = <125000>;
 100                                         hysteresis = <1000>;
 101                                         type = "critical";
 102                                 };
 103                         };
 104                 };
 105
 106                 quiet-thermal {
 107                         polling-delay-passive = <0>;
 108                         polling-delay = <5000>;
 109                         thermal-sensors = <&pm6125_adc_tm 1>;
 110
 111                         trips {
 112                                 active-config0 {
 113                                         temperature = <125000>;
 114                                         hysteresis = <1000>;
 115                                         type = "critical";
 116                                 };
 117                         };
 118                 };
 119
 120                 xo-thermal {
 121                         polling-delay-passive = <0>;
 122                         polling-delay = <0>;
 123                         thermal-sensors = <&pm6125_adc_tm 2>;
 124
 125                         trips {
 126                                 active-config0 {
 127                                         temperature = <125000>;
 128                                         hysteresis = <1000>;
 129                                         type = "critical";
 130                                 };
 131                         };
 132                 };
 133
 134                 rf-pa1-thermal {
 135                         polling-delay-passive = <0>;
 136                         polling-delay = <0>;
 137                         thermal-sensors = <&pm6125_adc_tm 3>;
 138
 139                         trips {
 140                                 active-config0 {
 141                                         temperature = <125000>;
 142                                         hysteresis = <1000>;
 143                                         type = "critical";
 144                                 };
 145                         };
 146                 };
 147         };
 148 };
 149
 150 &gpi_dma0 {
 151         status = "okay";
 152 };
 153
 154 &hsusb_phy1 {
 155         vdd-supply = <&pm6125_l7>;
 156         vdda-pll-supply = <&pm6125_l10>;
 157         vdda-phy-dpdm-supply = <&pm6125_l15>;
 158         status = "okay";
 159 };
 160
 161 &i2c1 {
 162         clock-frequency = <400000>;
 163         status = "okay";
 164
 165         /* NXP PN553 NFC @ 28 */
 166 };
 167
 168 &i2c2 {
 169         clock-frequency = <400000>;
 170         status = "okay";
 171
 172         /* Samsung touchscreen @ 48 */
 173 };
 174
 175 &i2c3 {
 176         clock-frequency = <1000000>;
 177         status = "okay";
 178
 179         /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
 180 };
 181
 182 &mdss {
 183         status = "okay";
 184 };
 185
 186 &mdss_dsi0 {
 187         vdda-supply = <&pm6125_l18>;
 188         status = "okay";
 189
 190         panel@0 {
 191                 compatible = "samsung,sofef01-m-ams597ut01";
 192                 reg = <0>;
 193
 194                 reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
 195
 196                 vddio-supply = <&pm6125_l12>;
 197
 198                 pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>;
 199                 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>;
 200                 pinctrl-names = "default", "sleep";
 201
 202                 port {
 203                         panel_in: endpoint {
 204                                 remote-endpoint = <&mdss_dsi0_out>;
 205                         };
 206                 };
 207         };
 208 };
 209
 210 &mdss_dsi0_out {
 211         remote-endpoint = <&panel_in>;
 212         data-lanes = <0 1 2 3>;
 213 };
 214
 215 &mdss_dsi0_phy {
 216         status = "okay";
 217 };
 218
 219 &pm6125_adc {
 220         pinctrl-names = "default";
 221         pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
 222
 223         channel@4d {
 224                 reg = <ADC5_AMUX_THM1_100K_PU>;
 225                 qcom,ratiometric;
 226                 qcom,hw-settle-time = <200>;
 227                 qcom,pre-scaling = <1 1>;
 228                 label = "rf_pa0_therm";
 229         };
 230
 231         channel@4e {
 232                 reg = <ADC5_AMUX_THM2_100K_PU>;
 233                 qcom,ratiometric;
 234                 qcom,hw-settle-time = <200>;
 235                 qcom,pre-scaling = <1 1>;
 236                 label = "quiet_therm";
 237         };
 238
 239         channel@52 {
 240                 reg = <ADC5_GPIO1_100K_PU>;
 241                 qcom,ratiometric;
 242                 qcom,hw-settle-time = <200>;
 243                 qcom,pre-scaling = <1 1>;
 244                 label = "camera_flash_therm";
 245         };
 246
 247         channel@54 {
 248                 reg = <ADC5_GPIO3_100K_PU>;
 249                 qcom,ratiometric;
 250                 qcom,hw-settle-time = <200>;
 251                 qcom,pre-scaling = <1 1>;
 252                 label = "emmc_ufs_therm";
 253         };
 254
 255         channel@55 {
 256                 reg = <ADC5_GPIO4_100K_PU>;
 257                 qcom,ratiometric;
 258                 qcom,hw-settle-time = <200>;
 259                 qcom,pre-scaling = <1 1>;
 260                 label = "rf_pa1_therm";
 261         };
 262 };
 263
 264 &pm6125_adc_tm {
 265         status = "okay";
 266
 267         rf-pa0-therm@0 {
 268                 reg = <0>;
 269                 io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
 270                 qcom,ratiometric;
 271                 qcom,hw-settle-time-us = <200>;
 272         };
 273
 274         quiet-therm@1 {
 275                 reg = <1>;
 276                 io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
 277                 qcom,ratiometric;
 278                 qcom,hw-settle-time-us = <200>;
 279         };
 280
 281         xo-therm@2 {
 282                 reg = <2>;
 283                 io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
 284                 qcom,ratiometric;
 285                 qcom,hw-settle-time-us = <200>;
 286         };
 287
 288         rf-pa1-therm@3 {
 289                 reg = <3>;
 290                 io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
 291                 qcom,ratiometric;
 292                 qcom,hw-settle-time-us = <200>;
 293         };
 294 };
 295
 296 &pm6125_gpios {
 297         camera_flash_therm: camera-flash-therm-state {
 298                 pins = "gpio3";
 299                 function = PMIC_GPIO_FUNC_NORMAL;
 300                 bias-high-impedance;
 301         };
 302
 303         emmc_ufs_therm: emmc-ufs-therm-state {
 304                 pins = "gpio6";
 305                 function = PMIC_GPIO_FUNC_NORMAL;
 306                 bias-high-impedance;
 307         };
 308
 309         rf_pa1_therm: rf-pa1-therm-state {
 310                 pins = "gpio7";
 311                 function = PMIC_GPIO_FUNC_NORMAL;
 312                 bias-high-impedance;
 313         };
 314 };
 315
 316 &pon_pwrkey {
 317         status = "okay";
 318 };
 319
 320 &pon_resin {
 321         status = "okay";
 322         linux,code = <KEY_VOLUMEUP>;
 323 };
 324
 325 &rpm_requests {
 326         regulators-0 {
 327                 compatible = "qcom,rpm-pm6125-regulators";
 328
 329                 vdd_l2_l3_l4-supply = <&pm6125_l7>;
 330                 vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>;
 331
 332                 /*
 333                  * S3/S4 is VDD_CX
 334                  * S5 is VDD_MX/WCSS_MX
 335                  */
 336
 337                 pm6125_s6: s6 {
 338                         regulator-min-microvolt = <936000>;
 339                         regulator-max-microvolt = <1422000>;
 340                 };
 341
 342                 pm6125_l1: l1 {
 343                         regulator-min-microvolt = <1200000>;
 344                         regulator-max-microvolt = <1256000>;
 345                 };
 346
 347                 pm6125_l2: l2 {
 348                         regulator-min-microvolt = <1000000>;
 349                         regulator-max-microvolt = <1056000>;
 350                 };
 351
 352                 pm6125_l3: l3 {
 353                         regulator-min-microvolt = <1000000>;
 354                         regulator-max-microvolt = <1064000>;
 355                 };
 356
 357                 pm6125_l4: l4 {
 358                         regulator-min-microvolt = <872000>;
 359                         regulator-max-microvolt = <976000>;
 360                 };
 361
 362                 pm6125_l5: l5 {
 363                         regulator-min-microvolt = <1648000>;
 364                         regulator-max-microvolt = <2950000>;
 365                         regulator-allow-set-load;
 366                 };
 367
 368                 pm6125_l6: l6 {
 369                         regulator-min-microvolt = <576000>;
 370                         regulator-max-microvolt = <656000>;
 371                 };
 372
 373                 pm6125_l7: l7 {
 374                         regulator-min-microvolt = <872000>;
 375                         regulator-max-microvolt = <976000>;
 376                 };
 377
 378                 pm6125_l8: l8 {
 379                         regulator-min-microvolt = <400000>;
 380                         regulator-max-microvolt = <728000>;
 381                 };
 382
 383                 pm6125_l9: l9 {
 384                         regulator-min-microvolt = <1800000>;
 385                         regulator-max-microvolt = <1896000>;
 386                 };
 387
 388                 pm6125_l10: l10 {
 389                         regulator-min-microvolt = <1800000>;
 390                         regulator-max-microvolt = <1896000>;
 391                 };
 392
 393                 pm6125_l11: l11 {
 394                         regulator-min-microvolt = <1800000>;
 395                         regulator-max-microvolt = <1800000>;
 396                         regulator-allow-set-load;
 397                 };
 398
 399                 pm6125_l12: l12 {
 400                         regulator-min-microvolt = <1800000>;
 401                         regulator-max-microvolt = <1996000>;
 402                 };
 403
 404                 pm6125_l13: l13 {
 405                         regulator-min-microvolt = <1800000>;
 406                         regulator-max-microvolt = <1832000>;
 407                 };
 408
 409                 pm6125_l14: l14 {
 410                         regulator-min-microvolt = <1800000>;
 411                         regulator-max-microvolt = <1904000>;
 412                 };
 413
 414                 pm6125_l15: l15 {
 415                         regulator-min-microvolt = <3104000>;
 416                         regulator-max-microvolt = <3232000>;
 417                 };
 418
 419                 pm6125_l16: l16 {
 420                         regulator-min-microvolt = <1800000>;
 421                         regulator-max-microvolt = <1904000>;
 422                 };
 423
 424                 pm6125_l17: l17 {
 425                         regulator-min-microvolt = <1248000>;
 426                         regulator-max-microvolt = <1304000>;
 427                 };
 428
 429                 pm6125_l18: l18 {
 430                         regulator-min-microvolt = <1200000>;
 431                         regulator-max-microvolt = <1264000>;
 432                 };
 433
 434                 pm6125_l19: l19 {
 435                         regulator-min-microvolt = <1648000>;
 436                         regulator-max-microvolt = <2952000>;
 437                 };
 438
 439                 pm6125_l20: l20 {
 440                         regulator-min-microvolt = <1648000>;
 441                         regulator-max-microvolt = <2952000>;
 442                 };
 443
 444                 pm6125_l21: l21 {
 445                         regulator-min-microvolt = <2600000>;
 446                         regulator-max-microvolt = <2856000>;
 447                 };
 448
 449                 pm6125_l22: l22 {
 450                         regulator-min-microvolt = <2944000>;
 451                         regulator-max-microvolt = <2950000>;
 452                         regulator-allow-set-load;
 453                 };
 454
 455                 pm6125_l23: l23 {
 456                         regulator-min-microvolt = <3000000>;
 457                         regulator-max-microvolt = <3400000>;
 458                 };
 459
 460                 pm6125_l24: l24 {
 461                         regulator-min-microvolt = <2944000>;
 462                         regulator-max-microvolt = <2950000>;
 463                         regulator-allow-set-load;
 464                 };
 465         };
 466 };
 467
 468 &qupv3_id_0 {
 469         status = "okay";
 470 };
 471
 472 &sdc2_off_state {
 473         sd-cd-pins {
 474                 pins = "gpio98";
 475                 function = "gpio";
 476                 drive-strength = <2>;
 477                 bias-disable;
 478         };
 479 };
 480
 481 &sdc2_on_state {
 482         sd-cd-pins {
 483                 pins = "gpio98";
 484                 function = "gpio";
 485                 drive-strength = <2>;
 486                 bias-pull-up;
 487         };
 488 };
 489
 490 &sdhc_1 {
 491         vmmc-supply = <&pm6125_l24>;
 492         vqmmc-supply = <&pm6125_l11>;
 493         status = "okay";
 494 };
 495
 496 &sdhc_2 {
 497         cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
 498         vmmc-supply = <&pm6125_l22>;
 499         vqmmc-supply = <&pm6125_l5>;
 500         no-sdio;
 501         no-mmc;
 502         status = "okay";
 503 };
 504
 505 &tlmm {
 506         gpio-reserved-ranges = <22 2>, <28 6>;
 507
 508         vol_down_n: vol-down-n-state {
 509                 pins = "gpio47";
 510                 function = "gpio";
 511                 drive-strength = <2>;
 512                 bias-disable;
 513         };
 514
 515         mdss_te_active_sleep: mdss-te-active-sleep-state {
 516                 pins = "gpio89";
 517                 function = "mdp_vsync";
 518                 drive-strength = <2>;
 519                 bias-pull-down;
 520         };
 521
 522         mdss_dsi_active: mdss-dsi-active-state {
 523                 pins = "gpio90";
 524                 function = "gpio";
 525                 drive-strength = <8>;
 526                 bias-disable;
 527         };
 528
 529         mdss_dsi_sleep: mdss-dsi-sleep-state {
 530                 pins = "gpio90";
 531                 function = "gpio";
 532                 drive-strength = <2>;
 533                 bias-pull-down;
 534         };
 535
 536 };
 537
 538 &usb3 {
 539         status = "okay";
 540 };
 541
 542 &usb3_dwc3 {
 543         extcon = <&extcon_usb>;
 544 };