arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /dts-v1/;
   3 /*
   4  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
   5  */
   6 #include "ipq8074.dtsi"
   7 #include "pmp8074.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
  12         compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
  13
  14         aliases {
  15                 serial0 = &blsp1_uart5;
  16                 serial1 = &blsp1_uart3;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0";
  21         };
  22
  23         memory@40000000 {
  24                 device_type = "memory";
  25                 reg = <0x0 0x40000000 0x0 0x20000000>;
  26         };
  27
  28         vreg_dummy: regulator-dummy { };
  29 };
  30
  31 &blsp1_i2c2 {
  32         status = "okay";
  33 };
  34
  35 &blsp1_spi1 {
  36         status = "okay";
  37
  38         flash@0 {
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <50000000>;
  44         };
  45 };
  46
  47 &blsp1_uart3 {
  48         status = "okay";
  49 };
  50
  51 &blsp1_uart5 {
  52         status = "okay";
  53 };
  54
  55 &pcie0 {
  56         status = "okay";
  57         perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
  58 };
  59
  60 &pcie1 {
  61         status = "okay";
  62         perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  63 };
  64
  65 &pcie_qmp0 {
  66         status = "okay";
  67 };
  68
  69 &pcie_qmp1 {
  70         status = "okay";
  71 };
  72
  73 &qpic_bam {
  74         status = "okay";
  75 };
  76
  77 &qpic_nand {
  78         status = "okay";
  79
  80         nand@0 {
  81                 reg = <0>;
  82                 nand-ecc-strength = <4>;
  83                 nand-ecc-step-size = <512>;
  84                 nand-bus-width = <8>;
  85         };
  86 };
  87
  88 &sdhc_1 {
  89         status = "okay";
  90         vqmmc-supply = <&l11>;
  91 };
  92
  93 &qusb_phy_0 {
  94         status = "okay";
  95 };
  96
  97 &qusb_phy_1 {
  98         status = "okay";
  99 };
 100
 101 &ssphy_0 {
 102         status = "okay";
 103         vdda-phy-supply = <&vreg_dummy>;
 104         vdda-pll-supply = <&vreg_dummy>;
 105 };
 106
 107 &ssphy_1 {
 108         status = "okay";
 109         vdda-phy-supply = <&vreg_dummy>;
 110         vdda-pll-supply = <&vreg_dummy>;
 111 };
 112
 113 &usb_0 {
 114         status = "okay";
 115 };
 116
 117 &usb_1 {
 118         status = "okay";
 119 };