arch/arm/mach-pxa/xcep.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*  linux/arch/arm/mach-pxa/xcep.c
   3  *
   4  *  Support for the Iskratel Electronics XCEP platform as used in
   5  *  the Libera instruments from Instrumentation Technologies.
   6  *
   7  *  Author:     Ales Bardorfer <ales@i-tech.si>
   8  *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
   9  *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
  10  *  Created:    June 2006
  11  *  Copyright:  (C) 2006-2009 Instrumentation Technologies
  12  */
  13
  14 #include <linux/platform_device.h>
  15 #include <linux/i2c.h>
  16 #include <linux/platform_data/i2c-pxa.h>
  17 #include <linux/smc91x.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/partitions.h>
  20 #include <linux/mtd/physmap.h>
  21
  22 #include <asm/mach-types.h>
  23 #include <asm/mach/arch.h>
  24 #include <asm/mach/irq.h>
  25 #include <asm/mach/map.h>
  26
  27 #include <mach/hardware.h>
  28 #include "pxa25x.h"
  29 #include <mach/smemc.h>
  30
  31 #include "generic.h"
  32 #include "devices.h"
  33
  34 #define XCEP_ETH_PHYS           (PXA_CS3_PHYS + 0x00000300)
  35 #define XCEP_ETH_PHYS_END       (PXA_CS3_PHYS + 0x000fffff)
  36 #define XCEP_ETH_ATTR           (PXA_CS3_PHYS + 0x02000000)
  37 #define XCEP_ETH_ATTR_END       (PXA_CS3_PHYS + 0x020fffff)
  38 #define XCEP_ETH_IRQ            IRQ_GPIO0
  39
  40 /*  XCEP CPLD base */
  41 #define XCEP_CPLD_BASE          0xf0000000
  42
  43
  44 /* Flash partitions. */
  45
  46 static struct mtd_partition xcep_partitions[] = {
  47         {
  48                 .name =         "Bootloader",
  49                 .size =         0x00040000,
  50                 .offset =       0,
  51                 .mask_flags =   MTD_WRITEABLE
  52         }, {
  53                 .name =         "Bootloader ENV",
  54                 .size =         0x00040000,
  55                 .offset =       0x00040000,
  56                 .mask_flags =   MTD_WRITEABLE
  57         }, {
  58                 .name =         "Kernel",
  59                 .size =         0x00100000,
  60                 .offset =       0x00080000,
  61         }, {
  62                 .name =         "Rescue fs",
  63                 .size =         0x00280000,
  64                 .offset =       0x00180000,
  65         }, {
  66                 .name =         "Filesystem",
  67                 .size =         MTDPART_SIZ_FULL,
  68                 .offset =       0x00400000
  69         }
  70 };
  71
  72 static struct physmap_flash_data xcep_flash_data[] = {
  73         {
  74                 .width          = 4,            /* bankwidth in bytes */
  75                 .parts          = xcep_partitions,
  76                 .nr_parts       = ARRAY_SIZE(xcep_partitions)
  77         }
  78 };
  79
  80 static struct resource flash_resource = {
  81         .start  = PXA_CS0_PHYS,
  82         .end    = PXA_CS0_PHYS + SZ_32M - 1,
  83         .flags  = IORESOURCE_MEM,
  84 };
  85
  86 static struct platform_device flash_device = {
  87         .name   = "physmap-flash",
  88         .id     = 0,
  89         .dev    = {
  90                 .platform_data = xcep_flash_data,
  91         },
  92         .resource = &flash_resource,
  93         .num_resources = 1,
  94 };
  95
  96
  97
  98 /* SMC LAN91C111 network controller. */
  99
 100 static struct resource smc91x_resources[] = {
 101         [0] = {
 102                 .name   = "smc91x-regs",
 103                 .start  = XCEP_ETH_PHYS,
 104                 .end    = XCEP_ETH_PHYS_END,
 105                 .flags  = IORESOURCE_MEM,
 106         },
 107         [1] = {
 108                 .start  = XCEP_ETH_IRQ,
 109                 .end    = XCEP_ETH_IRQ,
 110                 .flags  = IORESOURCE_IRQ,
 111         },
 112         [2] = {
 113                 .name   = "smc91x-attrib",
 114                 .start  = XCEP_ETH_ATTR,
 115                 .end    = XCEP_ETH_ATTR_END,
 116                 .flags  = IORESOURCE_MEM,
 117         },
 118 };
 119
 120 static struct smc91x_platdata xcep_smc91x_info = {
 121         .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
 122                   SMC91X_NOWAIT | SMC91X_USE_DMA,
 123 };
 124
 125 static struct platform_device smc91x_device = {
 126         .name           = "smc91x",
 127         .id             = -1,
 128         .num_resources  = ARRAY_SIZE(smc91x_resources),
 129         .resource       = smc91x_resources,
 130         .dev            = {
 131                 .platform_data = &xcep_smc91x_info,
 132         },
 133 };
 134
 135
 136 static struct platform_device *devices[] __initdata = {
 137         &flash_device,
 138         &smc91x_device,
 139 };
 140
 141
 142 /* We have to state that there are HWMON devices on the I2C bus on XCEP.
 143  * Drivers for HWMON verify capabilities of the adapter when loading and
 144  * refuse to attach if the adapter doesn't support HWMON class of devices. */
 145 static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
 146         .class = I2C_CLASS_HWMON
 147 };
 148
 149
 150 static mfp_cfg_t xcep_pin_config[] __initdata = {
 151         GPIO79_nCS_3,   /* SMC 91C111 chip select. */
 152         GPIO80_nCS_4,   /* CPLD chip select. */
 153         /* SSP communication to MSP430 */
 154         GPIO23_SSP1_SCLK,
 155         GPIO24_SSP1_SFRM,
 156         GPIO25_SSP1_TXD,
 157         GPIO26_SSP1_RXD,
 158         GPIO27_SSP1_EXTCLK
 159 };
 160
 161 static void __init xcep_init(void)
 162 {
 163         pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
 164
 165         pxa_set_ffuart_info(NULL);
 166         pxa_set_btuart_info(NULL);
 167         pxa_set_stuart_info(NULL);
 168         pxa_set_hwuart_info(NULL);
 169
 170         /* See Intel XScale Developer's Guide for details */
 171         /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
 172         __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
 173         /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
 174         __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
 175
 176         platform_add_devices(ARRAY_AND_SIZE(devices));
 177         pxa_set_i2c_info(&xcep_i2c_platform_data);
 178 }
 179
 180 MACHINE_START(XCEP, "Iskratel XCEP")
 181         .atag_offset    = 0x100,
 182         .init_machine   = xcep_init,
 183         .map_io         = pxa25x_map_io,
 184         .nr_irqs        = PXA_NR_IRQS,
 185         .init_irq       = pxa25x_init_irq,
 186         .handle_irq     = pxa25x_handle_irq,
 187         .init_time      = pxa_timer_init,
 188         .restart        = pxa_restart,
 189 MACHINE_END
 190