Remove debian-specific stuff from upstream branch.

diff --git a/.bzr-builddeb/default.conf b/.bzr-builddeb/default.conf
deleted file mode 100644 (file)
index 97c8aa7..0000000
--- a/.bzr-builddeb/default.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-[BUILDDEB]
-split = True
-require-hooks = True

diff --git a/.bzr-builddeb/hooks/pre-build/autogen.sh b/.bzr-builddeb/hooks/pre-build/autogen.sh
deleted file mode 100755 (executable)
index d6a5433..0000000
--- a/.bzr-builddeb/hooks/pre-build/autogen.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-autoconf -f

diff --git a/debian/README.Debian b/debian/README.Debian
deleted file mode 100644 (file)
index 45d176f..0000000
--- a/debian/README.Debian
+++ /dev/null
@@ -1,51 +0,0 @@
-pam-krb5-migrate for Debian
----------------------------
-This package has been built with support for accessing the Kerberos 
-administration over the network.
-
-SETTING UP THE PAM_KRB5_MIGRATE MODULE
-
-If you do not already have a KDC, you will need to set up a Kerberos
-database for your realm.  See the Kerberos V5 Installation Guide for
-details.
-
-If you will be updating against a live database from a machine other than
-the KDC, or if you intend to run the migration module on more than one
-machine at a time, you will need to use kadmin (or kadmin.local) to create
-a special Kerberos principal called pam_migrate/<hostname>, where
-<hostname> is the full domain name (FQDN) of the host where you're
-deploying the pam module.
-
-% kadmin
-Authenticating as principal admin/admin@REALM with password.
-kadmin.local:  add --use-defaults -r pam_migrate/hostname@REALM
-WARNING: no policy specified for pam_migrate/hostname@REALM; defaulting to no policy
-Principal "pam_migrate/hostname@REALM" created.
-
-Then extract the key for this principal to a keytab for use on the host:
-
-kadmin.local:   ext -k /var/kerberos/krb5kdc/hostname.keytab pam_migrate/hostname
-Entry for principal pam_migrate/hostname with kvno 4, encryption type DES cbc mode with CRC-32 added to keytab
-WRFILE:/var/kerberos/krb5kdc/hostname.keytab.
-Entry for principal pam_migrate/hostname with kvno 4, encryption type Triple DES cbc mode raw added to keytab
-WRFILE:/var/kerberos/krb5kdc/hostname.keytab.
-
-
-This principal should *only* have permission to add principals to the
-database and should have no other permissions.  To give the principal
-permission to add to the database, add this line to the top of your
-kadmind.acl file:
-
-pam_migrate/hostname@REALM             add
-
-You can also give all principals of the form pam_migrate/<hostname>
-permission to add by using the line
-
-pam_migrate/*@REALM                    add
-
-You will then need to copy your new keytab (securely!) to the appropriate
-machine and install it as /etc/security/pam_krb5.keytab.  Like all
-keytabs, this file should be readable only by root and should be treated
-with the utmost care when transferring it to the destination host.
-*Anyone with access to this keytab will be able to create new Kerberos
-principals in your realm.*

diff --git a/debian/changelog b/debian/changelog
deleted file mode 100644 (file)
index 111dd6b..0000000
--- a/debian/changelog
+++ /dev/null
@@ -1,5 +0,0 @@
-libpam-krb5-migrate-heimdal (0.0.5-1) unstable; urgency=low
-
-  * Initial release. 
-
- -- Jelmer Vernooij <jelmer@samba.org>  Sat, 11 Nov 2006 13:58:49 +0100

diff --git a/debian/compat b/debian/compat
deleted file mode 100644 (file)
index 7ed6ff8..0000000
--- a/debian/compat
+++ /dev/null
@@ -1 +0,0 @@
-5

diff --git a/debian/control b/debian/control
deleted file mode 100644 (file)
index b027c5d..0000000
--- a/debian/control
+++ /dev/null
@@ -1,19 +0,0 @@
-Source: libpam-krb5-migrate-heimdal
-Section: net
-Priority: optional
-Maintainer: Jelmer Vernooij <jelmer@samba.org>
-Standards-Version: 3.7.2.0
-Build-Depends: debhelper (>= 5.0.2), heimdal-dev (>= 0.3e-1), libpam0g-dev
-XS-Vcs-Bzr: http://people.samba.org/bzr/jelmer/pam_krb5_migrate/debian
-
-Package: libpam-krb5-migrate-heimdal
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: PAM module for migrating to Kerberos
- A stackable authentication module that takes a username and password from an 
- earlier module in the stack and attempts to transparently add the user to a 
- Kerberos realm using the Kerberos 5 kadmin service. The module can be used to 
- ease the administrative burdens of migrating a large installed userbase from 
- pre-existing authentication methods to a Kerberos-based setup. 
- .
- This package allows updating the database of a remote Heimdal server.

diff --git a/debian/copyright b/debian/copyright
deleted file mode 100644 (file)
index 0ebd2aa..0000000
--- a/debian/copyright
+++ /dev/null
@@ -1,22 +0,0 @@
-This package was Debianized by Jelmer Vernooij <jelmer@samba.org>
-on Sat Nov 11 14:01:19 CET 2006.
-
-The upstream source was downloaded from ftp://ftp.netexpress.net/pub/pam/pam_krb5_migrate.tgz
-
-Copyright (c) Steve Langasek <vorlon@netexpress.net>
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; version 2 dated June, 1991.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program;  if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-   MA 02110-1301, USA.
-
-The GPL is available on Debian systems in /usr/share/common-licenses/GPL.

diff --git a/debian/dirs b/debian/dirs
deleted file mode 100644 (file)
index b5d1077..0000000
--- a/debian/dirs
+++ /dev/null
@@ -1,2 +0,0 @@
-lib/security
-usr/share/man/man5

diff --git a/debian/install b/debian/install
deleted file mode 100644 (file)
index 026cef1..0000000
--- a/debian/install
+++ /dev/null
@@ -1 +0,0 @@
-pam_krb5_migrate.so lib/security/

diff --git a/debian/rules b/debian/rules
deleted file mode 100755 (executable)
index 22b7922..0000000
--- a/debian/rules
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/usr/bin/make -f
-# Based on debian/rules from libpam-heimdal
-
-configure: configure-stamp
-configure-stamp:
-       dh_testdir
-       ./configure
-       touch configure-stamp
-
-build: build-stamp
-build-stamp: configure
-       dh_testdir
-       $(MAKE) CFLAGS=-fPIC
-       touch build-stamp
-
-clean: clean1 
-clean1:
-       dh_testdir
-       dh_testroot
-       rm -f build-stamp
-       $(MAKE) distclean
-       dh_clean
-
-install: build
-       dh_testdir
-       dh_testroot
-       dh_clean -k
-       dh_installdirs
-       dh_install
-
-binary-indep: build install
-binary-arch: build install
-       dh_testdir
-       dh_testroot
-       dh_installdocs
-       dh_installchangelogs 
-       dh_installexamples
-       dh_strip
-       dh_compress
-       dh_fixperms
-       dh_installdeb
-       dh_shlibdeps
-       dh_gencontrol
-       dh_md5sums
-       dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install