vlendec/samba-autobuild/.git
4 months agoVERSION: Diable GIT_SNAPSHOT for the 4.10.0rc2 release. samba-4.10.0rc2
Karolin Seeger [Wed, 6 Feb 2019 07:59:54 +0000 (08:59 +0100)]
VERSION: Diable GIT_SNAPSHOT for the 4.10.0rc2 release.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
4 months agoWHATSNEW: Add release notes for Samba 4.10.0rc2.
Karolin Seeger [Wed, 6 Feb 2019 07:57:04 +0000 (08:57 +0100)]
WHATSNEW: Add release notes for Samba 4.10.0rc2.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
4 months agos3-vfs: Use ENOATTR in errno comparison for getxattr
Anoop C S [Wed, 23 Jan 2019 10:10:43 +0000 (15:40 +0530)]
s3-vfs: Use ENOATTR in errno comparison for getxattr

* ENODATA is not defined in FreeBSD
* ENOATTR is defined to be a synonym for ENODATA in Linux
* In its absence Samba already defines ENOATTR to either
  ENODATA or ENOENT

Thus it is safe and correct to compare with ENOATTR rather
than ENODATA.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13774

Signed-off-by: Anoop C S <anoopcs@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 23 21:59:10 CET 2019 on sn-devel-144

(cherry picked from commit c99402724a65f4e1f8ed4dcd236a43e0603bef0a)

Autobuild-User(v4-10-test): Karolin Seeger <kseeger@samba.org>
Autobuild-Date(v4-10-test): Tue Feb  5 23:59:06 CET 2019 on sn-devel-144

4 months agos3-vfs: add glusterfs_fuse vfs module.
Günther Deschner [Thu, 17 Jan 2019 14:21:07 +0000 (15:21 +0100)]
s3-vfs: add glusterfs_fuse vfs module.

This module only implements the get_real_filename function by accessing
a distinct extended attribute that is available over a glusterfs fuse
mount.

By implementing this vfs function users of a glusterfs fuse mount
achieve a much better performance in create based workloads where samba
then can avoid trying multiple case folding options to detect the real
filename.

Patch is based on an initial patch provided by
Poornima G <pgurusid@redhat.com>

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13774

Guenther

Signed-off-by: Günther Deschner <gd@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Tue Jan 22 18:37:56 CET 2019 on sn-devel-144

(cherry picked from commit adffe0dcf002aa4721dc7897261895e3486d5271)

4 months agoselftest:Samba4: use 'smbcontrol samba shutdown'
Stefan Metzmacher [Thu, 17 Jan 2019 22:50:45 +0000 (23:50 +0100)]
selftest:Samba4: use 'smbcontrol samba shutdown'

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Jan 30 01:51:48 CET 2019 on sn-devel-144

(cherry picked from commit d03991f569b54ae0a11911b622107fbae701715d)

4 months agos4:server: add support for 'smbcontrol samba shutdown'
Stefan Metzmacher [Thu, 17 Jan 2019 15:27:10 +0000 (16:27 +0100)]
s4:server: add support for 'smbcontrol samba shutdown'

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
(cherry picked from commit 832776c0fcf7cc658c128765514755c2d15b06a6)

4 months agos4:server: avoid using pid=0 for the parent 'samba' process
Stefan Metzmacher [Mon, 28 Jan 2019 15:29:51 +0000 (16:29 +0100)]
s4:server: avoid using pid=0 for the parent 'samba' process

It confuses the 'samba-tool processes' output and log messages.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
(cherry picked from commit 5bd7a8e5685caa09067745b108ef7e53e3108e97)

4 months agos4:messaging: add support 'smbcontrol <pid> debug/debuglevel'
Stefan Metzmacher [Tue, 15 Jan 2019 00:39:06 +0000 (01:39 +0100)]
s4:messaging: add support 'smbcontrol <pid> debug/debuglevel'

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
(cherry picked from commit 3a0c1da432c53de234b54bac90a3fb84534994eb)

4 months agomanpages/samba.7.xml: smbcontrol can also work with 'samba'
Stefan Metzmacher [Thu, 17 Jan 2019 15:29:37 +0000 (16:29 +0100)]
manpages/samba.7.xml: smbcontrol can also work with 'samba'

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13752

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Björn Baumbach <bbaumbach@samba.org>
(cherry picked from commit 12b9adec3ff48f4356f9ff865891dc3c652ff86b)

4 months agolibcli: dns: Change internal DNS_REQUEST_TIMEOUT from 2 to 10 seconds.
Jeremy Allison [Tue, 22 Jan 2019 17:24:35 +0000 (09:24 -0800)]
libcli: dns: Change internal DNS_REQUEST_TIMEOUT from 2 to 10 seconds.

Should make us more robust when dealing with slow DNS servers.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13750

Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jan 22 23:37:16 CET 2019 on sn-devel-144

(cherry picked from commit 36c42e6d629a0d4b0e5c60bdd68e08a8e60c477a)

4 months agopython: dns_hub: Fix indentation of 'raise' on error.
Jeremy Allison [Tue, 15 Jan 2019 16:45:26 +0000 (08:45 -0800)]
python: dns_hub: Fix indentation of 'raise' on error.

Remove second socket.sendto().

Bug: https://bugzilla.samba.org/show_bug.cgi?id=13750
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
(cherry picked from commit dd231a16a338cfe63d12cadf0fc3e2ebe7cac828)

4 months agojoin: Throw CommandError instead of Exception for simple errors
Tim Beale [Wed, 16 Jan 2019 02:37:00 +0000 (15:37 +1300)]
join: Throw CommandError instead of Exception for simple errors

Throwing an exception here still dumps out the Python stack trace, which
can be a little disconcerting for users.

In this case, the stack trace isn't going to really help at all (the
problem is pretty obvious), and it obscures the useful message
explaining what went wrong.

Throw a CommandError instead, which samba-tool will catch and display
more nicely.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13747

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Rowland Penny <rpenny@samba.org>
Reviewed-by: Jeremy Allison <rpenny@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 16 22:11:04 CET 2019 on sn-devel-144

(cherry picked from commit 9e4b08f4c384b8cae5ad853a7be7cf03e2749be5)

4 months agojoin: Fix TypeError when handling exception
Tim Beale [Wed, 16 Jan 2019 02:17:38 +0000 (15:17 +1300)]
join: Fix TypeError when handling exception

When we can't resolve a domain name, we were inadvertently throwing a
TypeError whilst trying to output a helpful message. E.g.

ERROR(<class 'TypeError'>): uncaught exception - 'NTSTATUSError' object
does not support indexing

Instead of indexing the object, we want to index the Exception.args so
that we just display the string portion of the exception error.

The same problem is also present for the domain trust commands.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13747

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Rowland Penny <rpenny@samba.org>
Reviewed-by: Jeremy Allison <rpenny@samba.org>
(cherry picked from commit 3bb7808984c163a7bba66fb983411d1281589722)

4 months agovfs_glusterfs: Adapt to changes in libgfapi signatures
Anoop C S [Tue, 20 Mar 2018 06:02:20 +0000 (11:32 +0530)]
vfs_glusterfs: Adapt to changes in libgfapi signatures

VFS module for GlusterFS fails to compile due to recent changes done to
some API signatures. Therefore adding missing arguments to those APIs
adapting to new signatures.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13330

Signed-off-by: Anoop C S <anoopcs@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Feb  3 17:00:33 CET 2019 on sn-devel-144

(cherry picked from commit 0e3eda5bab5ae9316a42725aea048fb350020ec7)

4 months agoWHATSNEW: fix typo.
Günther Deschner [Tue, 22 Jan 2019 10:18:20 +0000 (11:18 +0100)]
WHATSNEW: fix typo.

Guenther

Bug: https://bugzilla.samba.org/show_bug.cgi?id=13757

Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
4 months agoWHATSNEW: Add missing parenthesis
Anoop C S [Mon, 21 Jan 2019 08:54:49 +0000 (14:24 +0530)]
WHATSNEW: Add missing parenthesis

Bug: https://bugzilla.samba.org/show_bug.cgi?id=13757

Signed-off-by: Anoop C S <anoopcs@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Noel Power <npower@samba.org>
4 months agoctdb: Print locks latency in machinereadable stats
Volker Lendecke [Mon, 14 Jan 2019 14:04:59 +0000 (15:04 +0100)]
ctdb: Print locks latency in machinereadable stats

Bug: https://bugzilla.samba.org/show_bug.cgi?id=13742
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Wed Jan 16 05:34:17 CET 2019 on sn-devel-144

(cherry picked from commit 193a0d6f01372604b925d1972591062a0bb2400f)

Autobuild-User(v4-10-test): Karolin Seeger <kseeger@samba.org>
Autobuild-Date(v4-10-test): Mon Feb  4 13:09:49 CET 2019 on sn-devel-144

4 months agoWHATSNEW: Update for Bug 13676 changes in Samba 4.10
Tim Beale [Mon, 21 Jan 2019 22:08:13 +0000 (11:08 +1300)]
WHATSNEW: Update for Bug 13676 changes in Samba 4.10

Although it's unlikely that users will be using the 'smb' Python
bindings, it's probably worth noting in the release notes that these
bindings will be deprecated in future releases.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
4 months agonetcmd: Try to improve domain backup error message
Tim Beale [Wed, 16 Jan 2019 20:41:21 +0000 (09:41 +1300)]
netcmd: Try to improve domain backup error message

I ran this command as non-root by mistake and didn't find the error
message particularly helpful. Tweak the error message so it reminds the
user that they should be root. Also display the path we're looking for
the sam.ldb file in, to give them more clues.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Noel Power <npower@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Mon Jan 21 16:34:06 CET 2019 on sn-devel-144

(cherry picked from commit 10e54a095f005c0988a7e5e8a35cea6200197854)

4 months agotests: Run ntacls_backup tests against testenv with SMBv1 disabled
Tim Beale [Tue, 15 Jan 2019 21:02:07 +0000 (10:02 +1300)]
tests: Run ntacls_backup tests against testenv with SMBv1 disabled

Just to prove that the NTACL backup works over SMBv2.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 7fb93eaca74ffe17bbe7255210dd3090afe8d5dc)

4 months agoselftest: Give the backup testenvs a 'test1' share
Tim Beale [Thu, 13 Dec 2018 03:29:33 +0000 (16:29 +1300)]
selftest: Give the backup testenvs a 'test1' share

The ntacls_backup tests use the test1 share, and we want to run them
against the restoredc (which has SMBv1 disabled).

The xattr.tdb file is needed for the backend_obj.wrap_getxattr() call
(in ntacls.py) to work.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit a310de2db13c02a602e74139cb47ea9a25628e01)

4 months agotests: Run GPO commands against testenv with SMBv1 disabled
Tim Beale [Tue, 15 Jan 2019 04:12:20 +0000 (17:12 +1300)]
tests: Run GPO commands against testenv with SMBv1 disabled

Just to prove that they work across SMBv2.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit da33c2c4e4849f0985b08fbdc58cbd59b8426ec6)

4 months agontacls: Pass correct use_ntvfs through to setntacl()
Tim Beale [Tue, 15 Jan 2019 01:09:15 +0000 (14:09 +1300)]
ntacls: Pass correct use_ntvfs through to setntacl()

We were already checking the smb.conf to see if it uses the NTVFS file
server or the default smbd server. However, we weren't passing this
through to the setntacl() call.

This fixes the problem we noticed with 'samba-tool gpo aclcheck' failing
after a restore.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit f3fe96fc2e2d942b4a2e241777b5ee12b2295b97)

4 months agotests: Run samba_tool.gpo tests against backup testenvs
Tim Beale [Fri, 11 Jan 2019 02:09:48 +0000 (15:09 +1300)]
tests: Run samba_tool.gpo tests against backup testenvs

Run the GPO tests against the backup/restore testenvs.

Because the backup/restore preserves the NTACLs of the sysvol files,
running the GPO tests against the backup testenvs is a good sanity-
check. If fact it highlights that there is currently a problem with
restoring the GPO files - this shows up in 'samba-tool gpo aclcheck',
but we never noticed it until now.

NTACL backup works slightly different for offline backups, and rename
backups end up with more sysvol files, so run the tests against both
these envs.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 2a7372da7b84921b247cefc23d7003b8056d74a4)

4 months agos4:pysmb: Add error log that the s4 bindings are deprecated
Tim Beale [Fri, 11 Jan 2019 02:57:21 +0000 (15:57 +1300)]
s4:pysmb: Add error log that the s4 bindings are deprecated

We plan to delete the s4 SMB Python bindings in the next Samba release
after v4.10, but first give external consumers a heads-up, just in case
they are currently using the s4 bindings.

Note the auth_log tests still use the s4 bindings, but all user-facing
tools should now be updated to use the s3 bindings.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 6a29e63f32c0024587020fc1f92b3d1ecaa0afbc)

4 months agonetcmd: Change GPO commands to use s3 SMB Py bindings
Tim Beale [Fri, 11 Jan 2019 01:53:16 +0000 (14:53 +1300)]
netcmd: Change GPO commands to use s3 SMB Py bindings

This means we can now use GPO commands on a DC that has SMBv1 disabled.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 08f1627cb3fa1c9ff7a0f74e32874d305647dc42)

4 months agos3:pylibsmb: Add FILE_READ_ATTRIBUTES access to .loadfile() API
Tim Beale [Fri, 11 Jan 2019 01:25:32 +0000 (14:25 +1300)]
s3:pylibsmb: Add FILE_READ_ATTRIBUTES access to .loadfile() API

Add FILE_READ_ATTRIBUTES when opening the file handle, as we need to
read the file's size.

The .loadfile() API can end up calling cli_qfileinfo_basic() to get the
file size. This can end up doing a 'FILE_ALL_INFORMATION' SMBv2 request
underneath, which the MS-SMB2 spec (section 3.3.5.20.1 Handling
SMB2_0_INFO_FILE) says the file handle must have FILE_READ_ATTRIBUTES
access granted.

I noticed this problem when running .loadfile() against the NTVFS
server.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 0304b08de5ba1b4a6e08568a559c52f7d9e943d3)

4 months agonetcmd: Change SMB flags from s4 Py bindings to s3
Tim Beale [Tue, 8 Jan 2019 02:10:46 +0000 (15:10 +1300)]
netcmd: Change SMB flags from s4 Py bindings to s3

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 345746ea5f4cca2620421ac0c8a649a596f5c19d)

4 months agos3:pylibsmb: Add .set_acl API to SMB py bindings
Tim Beale [Tue, 8 Jan 2019 01:42:05 +0000 (14:42 +1300)]
s3:pylibsmb: Add .set_acl API to SMB py bindings

This is pretty similar code to py_smb_getacl(), except it's calling
cli_set_security_descriptor() instead of cli_query_security_descriptor()

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit b982811b60521624f1f600841ffa05e306eb936a)

4 months agopython/gpclass: Convert gpclass to use s3 SMB Python bindings
Tim Beale [Thu, 13 Dec 2018 21:37:11 +0000 (10:37 +1300)]
python/gpclass: Convert gpclass to use s3 SMB Python bindings

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit 3b2e86bba1f6b22b144b07db454b842f0c0779ae)

4 months agos3:libsmb: Honor disable_netbios option in smbsock_connect_send
Justin Stephenson [Mon, 14 Jan 2019 15:36:47 +0000 (10:36 -0500)]
s3:libsmb: Honor disable_netbios option in smbsock_connect_send

If disable_netbios is set, return before the tevent timer is triggered
to prevent outgoing netbios connections.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13727

Signed-off-by: Justin Stephenson <jstephen@redhat.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
(cherry picked from commit c324f84a2fa25e29d2f7879fbcd35ce0e76a78f8)

5 months agoVERSION: Bump version up to 4.10.0rc2...
Karolin Seeger [Tue, 15 Jan 2019 10:02:10 +0000 (11:02 +0100)]
VERSION: Bump version up to 4.10.0rc2...

and re-enable GIT_SNAPSHOT.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
(replaces commit 75106e05b42e5d4629aacfa941213745d9d6e819)

5 months agoVERSION: Bump version up to 4.10.0rc1... samba-4.10.0rc1
Karolin Seeger [Tue, 15 Jan 2019 10:01:07 +0000 (11:01 +0100)]
VERSION: Bump version up to 4.10.0rc1...

and disable GIT_SNAPSHOT for the release.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
(replaces commit 9537e5d2a14a35bcba659d679d2d156de6c678cc)

5 months agoWHATSNEW: Add release note for Samba 4.10.0rc1.
Karolin Seeger [Tue, 15 Jan 2019 09:59:52 +0000 (10:59 +0100)]
WHATSNEW: Add release note for Samba 4.10.0rc1.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
(replaces commit 3f4bd61b8408f8d97817023f07de20746ce54f90)

5 months agoldb: version 1.5.2 ldb-1.5.2
Stefan Metzmacher [Mon, 14 Jan 2019 22:41:49 +0000 (23:41 +0100)]
ldb: version 1.5.2

* Build fixes
* dirsync: Allow arbitrary length cookies
  (bug #13686)
* The build uses python3 by default:
* --extra-python would take python2 now
* To build with python2 only use:
  PYTHON=python2 ./configure
  PYTHON=python2 make
  PYTHON=python2 make install

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Karolin Seeger <kseeger@samba.org>
5 months agotevent: version 0.9.38 tevent-0.9.38
Stefan Metzmacher [Mon, 14 Jan 2019 22:40:36 +0000 (23:40 +0100)]
tevent: version 0.9.38

* Deprecate tevent wrapper api again
* Build fixes
* The build uses python3 by default:
* --extra-python would take python2 now
* To build with python2 only use:
  PYTHON=python2 ./configure
  PYTHON=python2 make
  PYTHON=python2 make install

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Karolin Seeger <kseeger@samba.org>
5 months agotalloc: version 2.1.15 talloc-2.1.15
Stefan Metzmacher [Mon, 14 Jan 2019 22:40:05 +0000 (23:40 +0100)]
talloc: version 2.1.15

* Deprecate talloc_set_memlimit() and talloc_autofree_context()
* Fix undefined behavior in talloc_memdup
* The build uses python3 by default:
* --extra-python would take python2 now
* To build with python2 only use:
  PYTHON=python2 ./configure
  PYTHON=python2 make
  PYTHON=python2 make install

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Karolin Seeger <kseeger@samba.org>
5 months agoMerge remote-tracking branch 'origin/v4-10-test' into HEAD
Stefan Metzmacher [Tue, 15 Jan 2019 10:23:20 +0000 (11:23 +0100)]
Merge remote-tracking branch 'origin/v4-10-test' into HEAD

This is a noop just to get the history of origin/v4-10-test
inline with master before the real 4.10.0rc1.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
5 months agoRevert "WHATSNEW: Add release note for Samba 4.10.0rc1."
Karolin Seeger [Tue, 15 Jan 2019 10:19:46 +0000 (11:19 +0100)]
Revert "WHATSNEW: Add release note for Samba 4.10.0rc1."

This reverts commit 3f4bd61b8408f8d97817023f07de20746ce54f90.

5 months agoRevert "VERSION: Bump version up to 4.10.0rc1..."
Karolin Seeger [Tue, 15 Jan 2019 10:19:43 +0000 (11:19 +0100)]
Revert "VERSION: Bump version up to 4.10.0rc1..."

This reverts commit 9537e5d2a14a35bcba659d679d2d156de6c678cc.

5 months agoRevert "VERSION: Bump version up to 4.10.0rc2..."
Karolin Seeger [Tue, 15 Jan 2019 10:19:40 +0000 (11:19 +0100)]
Revert "VERSION: Bump version up to 4.10.0rc2..."

This reverts commit 75106e05b42e5d4629aacfa941213745d9d6e819.

5 months agoaddns: Async ads_dns_lookup_ns
Volker Lendecke [Wed, 3 Jan 2018 15:22:24 +0000 (16:22 +0100)]
addns: Async ads_dns_lookup_ns

Use dns_lookup_send/recv to get NS records

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Tue Jan 15 11:16:00 CET 2019 on sn-devel-144

5 months agoVERSION: Bump version up to 4.10.0rc2...
Karolin Seeger [Tue, 15 Jan 2019 10:02:10 +0000 (11:02 +0100)]
VERSION: Bump version up to 4.10.0rc2...

and re-enable GIT_SNAPSHOT.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
5 months agoVERSION: Bump version up to 4.10.0rc1...
Karolin Seeger [Tue, 15 Jan 2019 10:01:07 +0000 (11:01 +0100)]
VERSION: Bump version up to 4.10.0rc1...

and disable GIT_SNAPSHOT for the release.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
5 months agoWHATSNEW: Add release note for Samba 4.10.0rc1.
Karolin Seeger [Tue, 15 Jan 2019 09:59:52 +0000 (10:59 +0100)]
WHATSNEW: Add release note for Samba 4.10.0rc1.

Signed-off-by: Karolin Seeger <kseeger@samba.org>
5 months agoaddns: Async ads_dns_lookup_srv
Volker Lendecke [Wed, 3 Jan 2018 12:26:54 +0000 (13:26 +0100)]
addns: Async ads_dns_lookup_srv

Use dns_lookup_send/recv to get SRV records. This avoids synchronous libresolv
calls and provides the infrastructure to get dsgetdcname async.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agosamba_dnsupdate: With dns_hub, we don't need resolv_wrap
Volker Lendecke [Thu, 3 Jan 2019 15:44:45 +0000 (16:44 +0100)]
samba_dnsupdate: With dns_hub, we don't need resolv_wrap

Best viewed with git show -b

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoselftest: Use dns_hub's resolv.conf
Volker Lendecke [Wed, 2 Jan 2019 20:24:34 +0000 (21:24 +0100)]
selftest: Use dns_hub's resolv.conf

Pass it as RESOLV_CONF envvar everywhere

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoselftest: Add dns_hub deps
Volker Lendecke [Wed, 2 Jan 2019 13:18:44 +0000 (14:18 +0100)]
selftest: Add dns_hub deps

All the DCs want the dns forwarder

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoselftest: setup_dns_hub
Stefan Metzmacher [Tue, 6 Feb 2018 08:46:41 +0000 (09:46 +0100)]
selftest: setup_dns_hub

Start the central dns forwarder on interface 64

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoselftest: add central dns forwarder
Volker Lendecke [Fri, 12 Jan 2018 14:53:03 +0000 (15:53 +0100)]
selftest: add central dns forwarder

This is a small DNS server that has hard redirects to the different domain
controllers based on domain names. This is required because future commits will
avoid calling into libresolv's code which resolv_wrapper takes care of.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agolibcli/dns: Add dns_res_rec_get_sockaddr
Volker Lendecke [Thu, 10 Jan 2019 15:54:41 +0000 (16:54 +0100)]
libcli/dns: Add dns_res_rec_get_sockaddr

Pull the address from a res_rec if it's there

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agolibcli/dns: clidns must depend on ndr_standard, not on NDR_DNS
Volker Lendecke [Thu, 4 Jan 2018 15:05:35 +0000 (16:05 +0100)]
libcli/dns: clidns must depend on ndr_standard, not on NDR_DNS

Otherwise we can't link this into other libraries

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agolibcli/dns: Make "clidns" a library
Volker Lendecke [Thu, 4 Jan 2018 16:06:53 +0000 (17:06 +0100)]
libcli/dns: Make "clidns" a library

This will be linked into the SAMBA_LIBRARY "addns" in the next step. Because
the other user, "dnsserver_common", is also a library, we can't link this as a
subsystem anymore.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agodns_lookup: Let make test override the resolv.conf location
Volker Lendecke [Thu, 4 Jan 2018 19:58:05 +0000 (20:58 +0100)]
dns_lookup: Let make test override the resolv.conf location

Make this a separate commit: That is the feature that libc unfortunately does
not give us.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agolibcli/dns: Add dns_lookup
Volker Lendecke [Tue, 2 Jan 2018 12:56:56 +0000 (13:56 +0100)]
libcli/dns: Add dns_lookup

Wrapper function to parse resolv.conf and talk to multiple nameservers. This is
the code where we might want to add a "working nameserver" cache. glibc always
looks at the first configured nameserver. If that's dead, glibc runs into a
timeout and only then asks the second one that might succeed. When more than
one dns query is to be performed, these timeouts add up.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agolibcli/dns: Add resolv.conf parsing
Volker Lendecke [Mon, 1 Jan 2018 18:35:46 +0000 (19:35 +0100)]
libcli/dns: Add resolv.conf parsing

Right now this only looks at the nameserver setting. It is initally made for
asynchronous AD DC lookup routines, where we don't need the "search", "domain"
and other settings. When we convert general "net", "smbclient" and others to
use this, we might either add "domain" handling to this code or look at
something like c-ares which already does it.

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agodns_update: samba_dnsupdate's exit code is not an errno
Volker Lendecke [Wed, 19 Dec 2018 13:16:38 +0000 (14:16 +0100)]
dns_update: samba_dnsupdate's exit code is not an errno

This avoids confusing messages, samba_dnsupdate returns the number of
failed updates

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoaddns: Centralize siteless lookup fallback
Volker Lendecke [Fri, 11 Jan 2019 13:18:53 +0000 (14:18 +0100)]
addns: Centralize siteless lookup fallback

We had the same logic 3 times, coalesce into one

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs_fileid: fix get_connectpath_ino
Ralph Wuerthner [Thu, 10 Jan 2019 13:28:14 +0000 (14:28 +0100)]
vfs_fileid: fix get_connectpath_ino

Bug: https://bugzilla.samba.org/show_bug.cgi?id=13741

Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jan 15 04:13:15 CET 2019 on sn-devel-144

5 months agos3:smbd: perform impersonation in smb2_query_directory_fetch_write_time_done()
Ralph Boehme [Mon, 14 Jan 2019 12:51:23 +0000 (13:51 +0100)]
s3:smbd: perform impersonation in smb2_query_directory_fetch_write_time_done()

This is not strictly required, as we ne never trigger additional VFS
requests via this codepath. But for safety reasons ensure we're running
in the correct impersonation state.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jan 14 22:30:24 CET 2019 on sn-devel-144

5 months agos3:smbd: perform impersonation in smb2_query_directory_dos_mode_done()
Ralph Boehme [Mon, 14 Jan 2019 12:51:23 +0000 (13:51 +0100)]
s3:smbd: perform impersonation in smb2_query_directory_dos_mode_done()

This is needed as the callback might be called in an arbitrary
impersonation state.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos3:smbd: perform impersonation in dos_mode_at_vfs_get_dosmode_done()
Ralph Boehme [Mon, 14 Jan 2019 12:51:23 +0000 (13:51 +0100)]
s3:smbd: perform impersonation in dos_mode_at_vfs_get_dosmode_done()

This is needed as the callback might be called in an arbitrary
impersonation state.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs_default: use change_to_user_by_fsp() instead of change_to_user()
Ralph Boehme [Mon, 14 Jan 2019 12:54:29 +0000 (13:54 +0100)]
vfs_default: use change_to_user_by_fsp() instead of change_to_user()

Cosmetic change.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs: perform impersonation in smb_vfs_call_getxattrat_done()
Ralph Boehme [Mon, 14 Jan 2019 12:51:23 +0000 (13:51 +0100)]
vfs: perform impersonation in smb_vfs_call_getxattrat_done()

This is needed as the callback might be called in an arbitrary
impersonation state.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs: use struct initializer in smb_vfs_call_getxattrat_send()
Ralph Boehme [Mon, 14 Jan 2019 12:52:51 +0000 (13:52 +0100)]
vfs: use struct initializer in smb_vfs_call_getxattrat_send()

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs: perform impersonation in smb_vfs_call_get_dos_attributes_done()
Ralph Boehme [Mon, 14 Jan 2019 12:51:23 +0000 (13:51 +0100)]
vfs: perform impersonation in smb_vfs_call_get_dos_attributes_done()

This is needed as the callback might be called in an arbitrary
impersonation state.

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agovfs: use struct initializer in smb_vfs_call_get_dos_attributes_send
Ralph Boehme [Mon, 14 Jan 2019 12:50:31 +0000 (13:50 +0100)]
vfs: use struct initializer in smb_vfs_call_get_dos_attributes_send

Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agonetcmd: Change domain backup commands to use s3 SMB Py bindings
Tim Beale [Thu, 13 Dec 2018 04:31:23 +0000 (17:31 +1300)]
netcmd: Change domain backup commands to use s3 SMB Py bindings

This means we can now backup a DC that has SMBv1 disabled.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Tim Beale <timbeale@samba.org>
Autobuild-Date(master): Mon Jan 14 06:49:09 CET 2019 on sn-devel-144

5 months agotests: Change ntaclsbackup tests over to use s3 Py bindings
Tim Beale [Thu, 13 Dec 2018 03:05:36 +0000 (16:05 +1300)]
tests: Change ntaclsbackup tests over to use s3 Py bindings

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agos3:pylibsmb: Add .get_acl() API to SMB py bindings
Tim Beale [Wed, 12 Dec 2018 03:14:43 +0000 (16:14 +1300)]
s3:pylibsmb: Add .get_acl() API to SMB py bindings

There is no obvious async-equivalent of cli_query_security_descriptor(),
so it will throw an error if anyone tries to use it in multi-threaded
mode. Currently only samba-tool and tests use the (s4) .get_acl() API,
both of which will be fine using the synchronous API.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13676

Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agolib/ldb: Use new PYARG_ES format for parseTuple
Noel Power [Mon, 12 Nov 2018 16:06:10 +0000 (16:06 +0000)]
lib/ldb: Use new PYARG_ES format for parseTuple

While 'es' format works great for unicode (in python2) and
str (in python3) The behaviour with str (in python2) is unexpected.
In python2 the str type is (re-encoded) with the specified encoding.
In python2 the 'et' type would be a better match, that ensures 'str'
type is treated like it was with 's' (no reencoding) and unicode is
encoded with the specified encoding. However in python3 'et' allows
byte (or bytearray) params to be accepted (with no reencoding), we
don't want this. This patch adds a new PYARG_STR_UNI format code which
is a hybrid, in python2 it evaluates to 'et' and in python3 'es' and
so gives the desired behaviour for each python version.

Additionally remove the associated known fail.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13616
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Sun Jan 13 03:53:00 CET 2019 on sn-devel-144

5 months agoselftest: Enable ldb.python for PY3
Noel Power [Mon, 12 Nov 2018 17:56:46 +0000 (17:56 +0000)]
selftest: Enable ldb.python for PY3

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agolib/ldb/tests/python: Add test to pass utf8 encoded bytes to ldb.Dn
Noel Power [Mon, 12 Nov 2018 17:42:51 +0000 (17:42 +0000)]
lib/ldb/tests/python: Add test to pass utf8 encoded bytes to ldb.Dn

This test should demonstrate an error with the 'es' format in python
where a 'str' byte-string is passed (containing utf8 encoded bytes)
with some characters that cannot be decoded as ascii. The same
code if run in python3 should generate an error (needs string not
bytes)

Also Add knownfail for ldb.Dn passed utf8 encoded byte string
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agos4/libnet: use 'et' as format for ParseTuple with python2
Noel Power [Tue, 11 Dec 2018 15:58:44 +0000 (15:58 +0000)]
s4/libnet: use 'et' as format for ParseTuple with python2

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agopython: use 'et' as format for ParseTuple with python2
Noel Power [Tue, 11 Dec 2018 15:58:07 +0000 (15:58 +0000)]
python: use 'et' as format for ParseTuple with python2

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agoauth/credentials: use 'et' as format for ParseTuple with python2
Noel Power [Tue, 11 Dec 2018 15:32:11 +0000 (15:32 +0000)]
auth/credentials: use 'et' as format for ParseTuple with python2

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agopython: Add new compat PYARG_STR_UNI format
Noel Power [Tue, 11 Dec 2018 15:18:10 +0000 (15:18 +0000)]
python: Add new compat PYARG_STR_UNI format

In python2 PYARG_STR_UNI evaluates to et which allows str type
(e.g bytes) pass through unencoded and accepts unicode objects
encoded as utf8
In python3 PYARG_STR_UNI evaluates to es which allows str type
encoded as named/specified encoding

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agopython: Fix memory leak with ParseTuple (using 'es' format)
Noel Power [Fri, 9 Nov 2018 16:47:00 +0000 (16:47 +0000)]
python: Fix memory leak with ParseTuple (using 'es' format)

Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
5 months agoselftest:Samba4: run fl2003dc without security context multiplexing
Stefan Metzmacher [Fri, 14 Dec 2018 12:36:39 +0000 (13:36 +0100)]
selftest:Samba4: run fl2003dc without security context multiplexing

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Jan 12 06:25:37 CET 2019 on sn-devel-144

5 months agoselftest:Samba4: run the raw_protocol test with a limit of 8 auth contexts
Stefan Metzmacher [Fri, 14 Dec 2018 12:51:27 +0000 (13:51 +0100)]
selftest:Samba4: run the raw_protocol test with a limit of 8 auth contexts

This is much faster than exploring the limit of 2049 during autobuild.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server: implement security context multiplexing
Stefan Metzmacher [Thu, 8 Nov 2018 13:59:58 +0000 (14:59 +0100)]
s4:rpc_server: implement security context multiplexing

There're some systems like Cisco ISE use security multiplexing
without checking (via bind time feature negotiation)
the server supports it.

Others like VMWare View, fallback to NT4 style netlogon
connections without using netlogon secure channel,
which then triggers an error, with "server schannel = yes",
see https://bugzilla.samba.org/show_bug.cgi?id=13464.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: add tests to demonstrate how security context multiplexing...
Stefan Metzmacher [Wed, 21 Nov 2018 10:01:55 +0000 (11:01 +0100)]
py:dcerpc/raw_protocol: add tests to demonstrate how security context multiplexing works

Important things are this:
- It's not required to use the bind time feature negotiation in order
  to use it, it's only a hint for the client, but nothing is really
  negotiated, unlike the request multiplexing with the
  DCERPC_PFC_FLAG_CONC_MPX.
- There's special handling related to AUTH_LEVEL_CONNECT
  and requests without auth trailer
- An security context is identified by the unique
  tuple of auth_type, auth_level and auth_context_id (all together!),
  not just the auth_context_id.
- There's a limit of 2049 explicit authentication contexts.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_testcase: add assertEqualsStrLower()
Stefan Metzmacher [Mon, 26 Nov 2018 10:49:22 +0000 (11:49 +0100)]
py:dcerpc/raw_testcase: add assertEqualsStrLower()

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopidl/Python: use py_dcerpc_ndr_pointer_wrap/deref if multiple pointer levels are...
Stefan Metzmacher [Thu, 29 Nov 2018 12:25:21 +0000 (13:25 +0100)]
pidl/Python: use py_dcerpc_ndr_pointer_wrap/deref if multiple pointer levels are used

This will help the raw_protocol test to explore lsa_GetUserName.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:pyrpc: add py_dcerpc_ndr_pointer_deref/wrap() infrastructure
Stefan Metzmacher [Thu, 29 Nov 2018 11:41:34 +0000 (12:41 +0100)]
s4:pyrpc: add py_dcerpc_ndr_pointer_deref/wrap() infrastructure

Some idl files use more than one layer of unique pointers. e.g.

    NTSTATUS lsa_GetUserName(
            [in,unique] [string,charset(UTF16)] uint16 *system_name,
            [in,out,ref] lsa_String **account_name,
            [in,out,unique] lsa_String **authority_name
            );

In order to specify *io.in.authority_name = NULL,
we need to wrap the pointer value (lsa_String or None)
into an base.ndr_pointer() object.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:pyrpc: make use of pytalloc_get_type() in py_dcerpc_syntax_init_helper()
Stefan Metzmacher [Thu, 29 Nov 2018 15:47:15 +0000 (16:47 +0100)]
s4:pyrpc: make use of pytalloc_get_type() in py_dcerpc_syntax_init_helper()

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server/lsa: specify \\pipe\lsass as ncacn_np_secondary_endpoint
Stefan Metzmacher [Wed, 12 Dec 2018 21:41:56 +0000 (22:41 +0100)]
s4:rpc_server/lsa: specify \\pipe\lsass as ncacn_np_secondary_endpoint

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server: make it possible to specify ncacn_np_secondary_endpoint
Stefan Metzmacher [Wed, 12 Dec 2018 21:41:56 +0000 (22:41 +0100)]
s4:rpc_server: make it possible to specify ncacn_np_secondary_endpoint

Even a connect to \\pipe\lsarpc should return a secondary_address
of '\\pipe\\lsass'. But that will be implemented in a following commit.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: demonstrate that \\pipe\lsarpc returns \\pipe\lsass as second...
Stefan Metzmacher [Thu, 13 Dec 2018 09:13:03 +0000 (10:13 +0100)]
py:dcerpc/raw_protocol: demonstrate that \\pipe\lsarpc returns \\pipe\lsass as secondary_address

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server: only share assoc group ids on the same transport
Stefan Metzmacher [Wed, 12 Dec 2018 12:49:35 +0000 (13:49 +0100)]
s4:rpc_server: only share assoc group ids on the same transport

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: add test_assoc_group_fail3()
Stefan Metzmacher [Wed, 12 Dec 2018 12:43:45 +0000 (13:43 +0100)]
py:dcerpc/raw_protocol: add test_assoc_group_fail3()

This demonstrates that assoc groups are only shared on the
same transport (endpoint).

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server: don't replace '\\pipe\\' with '\\PIPE\\'
Stefan Metzmacher [Wed, 12 Dec 2018 12:48:05 +0000 (13:48 +0100)]
s4:rpc_server: don't replace '\\pipe\\' with '\\PIPE\\'

This is not what Windows returns (at least for \\pipe\lsass).

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: add test_assoc_group_ok2 to check assoc groups over ncacn_np
Stefan Metzmacher [Wed, 12 Dec 2018 11:35:09 +0000 (12:35 +0100)]
py:dcerpc/raw_protocol: add test_assoc_group_ok2 to check assoc groups over ncacn_np

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agoselftest:Samba4: allow dcerpc auth level connect:lsarpc = yes in chgdcpass
Stefan Metzmacher [Thu, 22 Nov 2018 23:23:23 +0000 (00:23 +0100)]
selftest:Samba4: allow dcerpc auth level connect:lsarpc = yes in chgdcpass

This is required to explore the details of security context multiplexing
using lsa_GetUserName().

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: enable tests with the DCERPC_PFC_FLAG_SUPPORT_HEADER_SIGN bit
Stefan Metzmacher [Wed, 21 Nov 2018 08:38:46 +0000 (09:38 +0100)]
py:dcerpc/raw_protocol: enable tests with the DCERPC_PFC_FLAG_SUPPORT_HEADER_SIGN bit

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agos4:rpc_server: fix DCERPC_PFC_FLAG_SUPPORT_HEADER_SIGN negotiation to match Windows
Stefan Metzmacher [Wed, 21 Nov 2018 08:39:36 +0000 (09:39 +0100)]
s4:rpc_server: fix DCERPC_PFC_FLAG_SUPPORT_HEADER_SIGN negotiation to match Windows

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: consistently call self.recv_pdu(timeout=0.01) after auth3
Stefan Metzmacher [Wed, 21 Nov 2018 10:49:40 +0000 (11:49 +0100)]
py:dcerpc/raw_protocol: consistently call self.recv_pdu(timeout=0.01) after auth3

When we don't expect a FAULT, we should wait a little bit to check
there's no response to auth3 request. This reduces the raw_procol
test from 45s down to 35s total runtime against Windows.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_protocol: add tests for delayed header signing activation
Stefan Metzmacher [Wed, 21 Nov 2018 10:49:40 +0000 (11:49 +0100)]
py:dcerpc/raw_protocol: add tests for delayed header signing activation

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
5 months agopy:dcerpc/raw_testcase: add pfc_flags_2nd and use_auth3 options to do_generic_bind()
Stefan Metzmacher [Wed, 21 Nov 2018 10:49:40 +0000 (11:49 +0100)]
py:dcerpc/raw_testcase: add pfc_flags_2nd and use_auth3 options to do_generic_bind()

This makes it more flexible and allows to write complex tests in an
easier fashion.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=7113
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11892

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>