+++ /dev/null
-dnl @synopsis AX_CFLAGS_GCC_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
-dnl
-dnl AX_CFLAGS_GCC_OPTION(-fvomit-frame) would show a message as like
-dnl "checking CFLAGS for gcc -fvomit-frame ... yes" and adds
-dnl the optionflag to CFLAGS if it is understood. You can override
-dnl the shellvar-default of CFLAGS of course. The order of arguments
-dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
-dnl
-dnl The cousin AX_CXXFLAGS_GCC_OPTION would check for an option to add
-dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
-dnl (since it is possible to use different compilers for C and C++).
-dnl
-dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
-dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
-dnl However, if you use this macro in a few places, it would be great
-dnl if you would make up a new function-macro and submit it to the
-dnl ac-archive.
-dnl
-dnl - $1 option-to-check-for : required ("-option" as non-value)
-dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
-dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
-dnl
-dnl also: there are other variants that emerged from the original macro
-dnl variant which did just test an option to be possibly added. However,
-dnl some compilers accept an option silently, or possibly for just
-dnl another option that was not intended. Therefore, we have to do a
-dnl generic test for a compiler family. For gcc we check "-pedantic"
-dnl being accepted which is also understood by compilers who just want
-dnl to be compatible with gcc even when not being made from gcc sources.
-dnl
-dnl see also:
-dnl AX_CFLAGS_SUN_OPTION AX_CFLAGS_HPUX_OPTION
-dnl AX_CFLAGS_AIX_OPTION AX_CFLAGS_IRIX_OPTION
-dnl
-dnl @, tested, experimental
-dnl @version $Id: ax_cflags_gcc_option.m4,v 1.5 2003/11/29 08:13:25 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/C_Support/ax_cflags_gcc_option.html
-dnl
-AC_DEFUN([AX_CFLAGS_GCC_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % m4_ifval($2,$2,-option)" dnl GCC
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % m4_ifval($2,$2,-option)" dnl GCC
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl -------------------------------------------------------------------------
-
-AC_DEFUN([AX_CFLAGS_GCC_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % m4_ifval($1,$1,-option)" dnl GCC
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % m4_ifval($1,$1,-option)" dnl GCC
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-AC_DEFUN([AX_CFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CFLAGS_GCC_OPTION_NEW($@)],[AX_CFLAGS_GCC_OPTION_OLD($@)])])
-
-AC_DEFUN([AX_CXXFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CXXFLAGS_GCC_OPTION_NEW($@)],[AX_CXXFLAGS_GCC_OPTION_OLD($@)])])
-
-
-dnl @synopsis AX_CFLAGS_AIX_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
-dnl
-dnl AX_CFLAGS_AIX_OPTION(-qubicle) would show a message as like
-dnl "checking CFLAGS for aix/cc -qubicle ... yes" and adds
-dnl the optionflag to CFLAGS if it is understood. You can override
-dnl the shellvar-default of CFLAGS of course. The order of arguments
-dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
-dnl
-dnl The cousin AX_CXXFLAGS_AIX_OPTION would check for an option to add
-dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
-dnl (since it is possible to use different compilers for C and C++).
-dnl
-dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
-dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
-dnl However, if you use this macro in a few places, it would be great
-dnl if you would make up a new function-macro and submit it to the
-dnl ac-archive.
-dnl - $1 option-to-check-for : required ("-option" as non-value)
-dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
-dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
-dnl
-dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant.
-dnl
-dnl @, untested, experimental
-dnl @version $Id: ax_cflags_aix_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_aix_option.m4
-dnl
-AC_DEFUN([AX_CFLAGS_AIX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_aix_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for aix/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-qlanglvl=ansi -qsrcmsg % m4_ifval($2,$2,-option)" dnl AIX
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_AIX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_aix_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for aix/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-qlanglvl=ansi -qsrcmsg % m4_ifval($2,$2,-option)" dnl AIX
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl ------------------------------------------------------------------------
-
-AC_DEFUN([AX_CFLAGS_AIX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_aix_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for aix/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-qlanglvl=ansi -qsrcmsg % m4_ifval($1,$1,-option)" dnl AIX
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_AIX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_aix_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for aix/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-qlanglvl=ansi -qsrcmsg % m4_ifval($1,$1,-option)" dnl AIX
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-AC_DEFUN([AX_CFLAGS_AIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CFLAGS_AIX_OPTION_NEW($@)],[AX_CFLAGS_AIX_OPTION_OLD($@)])])
-
-AC_DEFUN([AX_CXXFLAGS_AIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CXXFLAGS_AIX_OPTION_NEW($@)],[AX_CXXFLAGS_AIX_OPTION_OLD($@)])])
-
-dnl @synopsis AX_CFLAGS_HPUX_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
-dnl
-dnl AX_CFLAGS_HPUX_OPTION(-Afresh) would show a message as like
-dnl "checking CFLAGS for hpux/cc -Afresh ... yes" and adds
-dnl the optionflag to CFLAGS if it is understood. You can override
-dnl the shellvar-default of CFLAGS of course. The order of arguments
-dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
-dnl
-dnl The cousin AX_CXXFLAGS_HPUX_OPTION would check for an option to add
-dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
-dnl (since it is possible to use different compilers for C and C++).
-dnl
-dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
-dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
-dnl However, if you use this macro in a few places, it would be great
-dnl if you would make up a new function-macro and submit it to the
-dnl ac-archive.
-dnl - $1 option-to-check-for : required ("-option" as non-value)
-dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
-dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
-dnl
-dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant.
-dnl
-dnl @, untested, experimental
-dnl @version $Id: ax_cflags_hpux_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_hpux_option.m4
-AC_DEFUN([AX_CFLAGS_HPUX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_hpux_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for hpux/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+ESlit +w1 -Aa % m4_ifval($2,$2,-option)" dnl HP-UX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_hpux_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for hpux/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+ESlit +w1 -Aa % m4_ifval($2,$2,-option)" dnl HP-UX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl ------------------------------------------------------------------------
-
-AC_DEFUN([AX_CFLAGS_HPUX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_hpux_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for hpux/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+ESlit +w1 -Aa % m4_ifval($1,$1,-option)" dnl HP-UX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_hpux_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for hpux/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+ESlit +w1 -Aa % m4_ifval($1,$1,-option)" dnl HP-UX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-AC_DEFUN([AX_CFLAGS_HPUX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CFLAGS_HPUX_OPTION_NEW($@)],[AX_CFLAGS_HPUX_OPTION_OLD($@)])])
-
-AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CXXFLAGS_HPUX_OPTION_NEW($@)],[AX_CXXFLAGS_HPUX_OPTION_OLD($@)])])
-
-
-dnl @synopsis AX_CFLAGS_IRIX_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
-dnl
-dnl AX_CFLAGS_IRIX_OPTION(-go_for_it) would show a message as like
-dnl "checking CFLAGS for irix/cc -go_for_it ... yes" and adds
-dnl the optionflag to CFLAGS if it is understood. You can override
-dnl the shellvar-default of CFLAGS of course. The order of arguments
-dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
-dnl
-dnl The cousin AX_CXXFLAGS_IRIX_OPTION would check for an option to add
-dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
-dnl (since it is possible to use different compilers for C and C++).
-dnl
-dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
-dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
-dnl However, if you use this macro in a few places, it would be great
-dnl if you would make up a new function-macro and submit it to the
-dnl ac-archive.
-dnl - $1 option-to-check-for : required ("-option" as non-value)
-dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
-dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
-dnl
-dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant.
-dnl
-dnl @, untested, experimental
-dnl @version $Id: ax_cflags_irix_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_irix_option.m4
-AC_DEFUN([AX_CFLAGS_IRIX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_irix_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for irix/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-fullwarn -use_readonly_const % m4_ifval($2,$2,-option)" dnl IRIX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_irix_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for irix/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-fullwarn -use_readonly_const % m4_ifval($2,$2,-option)" dnl IRIX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl --------------------------------------------------------------------------
-
-AC_DEFUN([AX_CFLAGS_IRIX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_irix_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for irix/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-fullwarn -use_readonly_const % m4_ifval($1,$1,-option)" dnl IRIX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_irix_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for irix/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-fullwarn -use_readonly_const % m4_ifval($1,$1,-option)" dnl IRIX C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-AC_DEFUN([AX_CFLAGS_IRIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CFLAGS_IRIX_OPTION_NEW($@)],[AX_CFLAGS_IRIX_OPTION_OLD($@)])])
-
-AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CXXFLAGS_IRIX_OPTION_NEW($@)],[AX_CXXFLAGS_IRIX_OPTION_OLD($@)])])
-
-
-dnl @synopsis AX_CFLAGS_SUN_OPTION (optionflag [,[shellvar][,[A][,[NA]]])
-dnl
-dnl AX_CFLAGS_SUN_OPTION(+xtreme) would show a message as like
-dnl "checking CFLAGS for sun/cc +xtreme ... yes" and adds
-dnl the optionflag to CFLAGS if it is understood. You can override
-dnl the shellvar-default of CFLAGS of course. The order of arguments
-dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL.
-dnl
-dnl The cousin AX_CXXFLAGS_SUN_OPTION would check for an option to add
-dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C
-dnl (since it is possible to use different compilers for C and C++).
-dnl
-dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or
-dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options.
-dnl However, if you use this macro in a few places, it would be great
-dnl if you would make up a new function-macro and submit it to the
-dnl ac-archive.
-dnl - $1 option-to-check-for : required ("-option" as non-value)
-dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case)
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl note: in earlier versions, $1-$2 were swapped. We try to detect the
-dnl situation and accept a $2=~/-/ as being the old option-to-check-for.
-dnl
-dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant.
-dnl
-dnl @, untested, experimental
-dnl @version $Id: ax_cflags_sun_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_sun_option.m4
-AC_DEFUN([AX_CFLAGS_SUN_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_sun_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for sun/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+xstrconst -Xc % m4_ifval($2,$2,-option)" dnl Solaris C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_SUN_OPTION_OLD], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_sun_option_$2])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for sun/cc m4_ifval($2,$2,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+xstrconst -Xc % m4_ifval($2,$2,-option)" dnl Solaris C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl -----------------------------------------------------------------------
-
-AC_DEFUN([AX_CFLAGS_SUN_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_sun_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for sun/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+xstrconst -Xc % m4_ifval($1,$1,-option)" dnl Solaris C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_SUN_OPTION_NEW], [dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_sun_option_$1])dnl
-AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for sun/cc m4_ifval($1,$1,-option)],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "+xstrconst -Xc % m4_ifval($1,$1,-option)" dnl Solaris C
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"])
- m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-AC_DEFUN([AX_CFLAGS_SUN_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CFLAGS_SUN_OPTION_NEW($@)],[AX_CFLAGS_SUN_OPTION_OLD($@)])])
-
-AC_DEFUN([AX_CXXFLAGS_SUN_OPTION],[ifelse(m4_bregexp([$2],[-]),-1,
-[AX_CXXFLAGS_SUN_OPTION_NEW($@)],[AX_CXXFLAGS_SUN_OPTION_OLD($@)])])
-
-
-dnl @synopsis AX_CFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
-dnl
-dnl Try to find a compiler option that enables most reasonable warnings.
-dnl This macro is directly derived from VL_PROG_CC_WARNINGS which is
-dnl split up into two AX_CFLAGS_WARN_ALL and AX_CFLAGS_WARN_ALL_ANSI
-dnl
-dnl For the GNU CC compiler it will be -Wall (and -ansi -pedantic)
-dnl The result is added to the shellvar being CFLAGS by default.
-dnl
-dnl Currently this macro knows about GCC, Solaris C compiler,
-dnl Digital Unix C compiler, C for AIX Compiler, HP-UX C compiler,
-dnl IRIX C compiler, NEC SX-5 (Super-UX 10) C compiler, and Cray J90
-dnl (Unicos 10.0.0.8) C compiler.
-dnl
-dnl - $1 shell-variable-to-add-to : CFLAGS
-dnl - $2 add-value-if-not-found : nothing
-dnl - $3 action-if-found : add value to shellvariable
-dnl - $4 action-if-not-found : nothing
-dnl
-dnl @version $Id: ax_cflags_warn_all.m4,v 1.2 2003/10/12 14:56:07 guidod Exp $
-dnl @author Guido Draheim <guidod@gmx.de>
-dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_warn_all.m4
-AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl
-AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_warn_all])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_C
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % -Wall" dnl GCC
- "-xstrconst % -v" dnl Solaris C
- "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix
- "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
- "-ansi -ansiE % -fullwarn" dnl IRIX
- "+ESlit % +w1" dnl HP-UX C
- "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
- "-h conform % -h msglevel 2" dnl Cray C (Unicos)
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[
- AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl the only difference - the LANG selection... and the default FLAGS
-
-AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl
-AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_warn_all])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
-VAR,[VAR="no, unknown"
- AC_LANG_SAVE
- AC_LANG_CXX
- ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-pedantic % -Wall" dnl GCC
- "-xstrconst % -v" dnl Solaris C
- "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix
- "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
- "-ansi -ansiE % -fullwarn" dnl IRIX
- "+ESlit % +w1" dnl HP-UX C
- "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
- "-h conform % -h msglevel 2" dnl Cray C (Unicos)
- #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
- AC_TRY_COMPILE([],[return 0;],
- [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
- FLAGS="$ac_save_[]FLAGS"
- AC_LANG_RESTORE
-])
-case ".$VAR" in
- .ok|.ok,*) m4_ifvaln($3,$3) ;;
- .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[
- AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;;
- *) m4_ifvaln($3,$3,[
- if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
- then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
- else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
- m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
- fi ]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-AS_VAR_POPDEF([FLAGS])dnl
-])
-
-dnl implementation tactics:
-dnl the for-argument contains a list of options. The first part of
-dnl these does only exist to detect the compiler - usually it is
-dnl a global option to enable -ansi or -extrawarnings. All other
-dnl compilers will fail about it. That was needed since a lot of
-dnl compilers will give false positives for some option-syntax
-dnl like -Woption or -Xoption as they think of it is a pass-through
-dnl to later compile stages or something. The "%" is used as a
-dnl delimimiter. A non-option comment can be given after "%%" marks.
-
AC_INIT(include/includes.h)
AC_CONFIG_HEADER(include/config.h)
+AC_DISABLE_STATIC
+AC_ENABLE_SHARED
+
SMB_VERSION_STRING=`cat $srcdir/include/version.h | grep 'SAMBA_VERSION_OFFICIAL_STRING' | cut -d '"' -f2`
echo "SAMBA VERSION: ${SMB_VERSION_STRING}"
echo "BUILD REVISION: ${SAMBA_VERSION_SVN_REVISION}"
fi
-#################################################
-# Figure out what type of system we are building on.
-
-UNAME_S=`(uname -s) 2>/dev/null` || UNAME_S="unknown"
-AC_MSG_CHECKING(uname -s)
-AC_MSG_RESULT(${UNAME_S})
-
-UNAME_R=`(uname -r) 2>/dev/null` || UNAME_R="unknown"
-AC_MSG_CHECKING(uname -r)
-AC_MSG_RESULT(${UNAME_R})
-
-UNAME_M=`(uname -m) 2>/dev/null` || UNAME_M="unknown"
-AC_MSG_CHECKING(uname -m)
-AC_MSG_RESULT(${UNAME_M})
-
-UNAME_P=`(uname -p) 2>/dev/null` || UNAME_P="unknown"
-AC_MSG_CHECKING(uname -p)
-AC_MSG_RESULT(${UNAME_P})
-
-AC_CANONICAL_SYSTEM
-
-#################################################
-# Detect the compiler early so we know how to run
-# feature tests correctly.
-
-sinclude(compiler.m4)
-
-##
-## for some reason this macro resets the CFLAGS
-## so save and restore
-##
-OLD_CFLAGS=${CFLAGS}
-AC_PROG_CC
-CFLAGS=${OLD_CFLAGS}
-
-OLD_CFLAGS=${CFLAGS}
-AC_PROG_CPP
-CFLAGS=${OLD_CFLAGS}
-
-dnl Check if we use GNU ld
-LD=${LD-ld}
-AC_PROG_LD_GNU
-
-AC_DISABLE_STATIC
-AC_ENABLE_SHARED
-
#################################################
# Directory handling stuff to support both the
# legacy SAMBA directories and FHS compliant
# if it has no value. This prevent *very* large debug binaries from occurring
# by default.
if test "x$CFLAGS" = x; then
- AX_CFLAGS_GCC_OPTION(-O, CFLAGS)
- AX_CFLAGS_IRIX_OPTION(-O, CFLAGS)
- # Make sure the MIPSPro compiler will never decide functions are too
- # big to optimise
- AX_CFLAGS_IRIX_OPTION(-OPT:Olimit=0, CFLAGS)
- AX_CFLAGS_HPUX_OPTION(-O, CFLAGS)
- AX_CFLAGS_SUN_OPTION(-O, CFLAGS)
- AX_CFLAGS_AIX_OPTION(-O, CFLAGS)
+ CFLAGS="-O"
fi
-CPPFLAGS="${CPPFLAGS} -D_SAMBA_BUILD_"
+CFLAGS="${CFLAGS} -D_SAMBA_BUILD_"
AC_ARG_ENABLE(developer, [ --enable-developer Turn on developer warnings and debugging (default=no)],
[if eval "test x$enable_developer = xyes"; then
developer=yes
- AX_CFLAGS_WARN_ALL(CFLAGS)
- AX_CFLAGS_GCC_OPTION(-gstabs, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wshadow, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wstrict-prototypes, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wpointer-arith, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wcast-align, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wwrite-strings, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wdeclaration-after-statement, CFLAGS)
- CPPFLAGS="${CPPFLAGS} -DDEBUG_PASSWORD -DDEVELOPER"
+ CFLAGS="${CFLAGS} -gstabs -Wall -Wshadow -Wstrict-prototypes -Wpointer-arith -Wcast-align -Wwrite-strings -DDEBUG_PASSWORD -DDEVELOPER"
+ # Add -Wdeclaration-after-statement if compiler supports it
+ AC_CACHE_CHECK(
+ [that the C compiler understands -Wdeclaration-after-statement],
+ samba_cv_HAVE_Wdeclaration_after_statement, [
+ AC_TRY_RUN_STRICT([
+ int main(void)
+ {
+ return 0;
+ }],[-Wdeclaration-after-statement],[$CPPFLAGS],[$LDFLAGS],
+ samba_cv_HAVE_Wdeclaration_after_statement=yes,
+ samba_cv_HAVE_Wdeclaration_after_statement=no,
+ samba_cv_HAVE_Wdeclaration_after_statement=cross)
+ ])
+ if test x"$samba_cv_HAVE_Wdeclaration_after_statement" = x"yes"; then
+ CFLAGS="${CFLAGS} -Wdeclaration-after-statement"
+ fi
fi])
AC_ARG_ENABLE(krb5developer, [ --enable-krb5developer Turn on developer warnings and debugging, except -Wstrict-prototypes (default=no)],
[if eval "test x$enable_krb5developer = xyes"; then
developer=yes
- AX_CFLAGS_WARN_ALL(CFLAGS)
- AX_CFLAGS_GCC_OPTION(-gstabs, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wshadow, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wpointer-arith, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wcast-align, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wcast-qual, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wwrite-strings, CFLAGS)
- AX_CFLAGS_GCC_OPTION(-Wdeclaration-after-statement, CFLAGS)
- CPPFLAGS="${CPPFLAGS} -DDEBUG_PASSWORD -DDEVELOPER"
+ CFLAGS="${CFLAGS} -gstabs -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -DDEBUG_PASSWORD -DDEVELOPER"
fi])
AC_ARG_ENABLE(dmalloc, [ --enable-dmalloc Enable heap debugging [default=no]])
LIBS="$LIBS -ldmalloc"
fi
-# Check for profile guided optimisation (PGO) support.
-
-AC_ARG_ENABLE(pgo,
-[ --enable-pgo=SCRIPT Compile with PGO (default=no)],
-[
- case $enableval in
- yes|no)
- AC_MSG_ERROR(the argument to --enable-pgo must be an executable script)
- esac
-
- samba_cv_have_pgo=no
-
- # Test for IRIX PGO first. Unfortunately, some of the later GCC option
- # tests can spuriously succeed with the MIPSPro compilers. Despite the
- # test succeeding, the GCC options don't work.
- if test "x$samba_cv_have_pgo" = "xno" ; then
- samba_cv_have_pgo=yes
- # The backslash below is horrible but necessary -- jpeach
- AX_CFLAGS_IRIX_OPTION("-fb_create\ samba.feedback",
- PGO_GENERATE_CFLAGS, [], [samba_cv_have_pgo=no])
- AX_CFLAGS_IRIX_OPTION("-fb_opt\ samba.feedback",
- PGO_USE_CFLAGS, [], [samba_cv_have_pgo=no])
- fi
-
- # Test GCC 4.x style profile flags.
- if test "x$samba_cv_have_pgo" = "xno" ; then
- samba_cv_have_pgo=yes
- AX_CFLAGS_GCC_OPTION(-fprofile-generate, PGO_GENERATE_CFLAGS,
- [], [samba_cv_have_pgo=no])
- AX_CFLAGS_GCC_OPTION(-fprofile-use, PGO_USE_CFLAGS,
- [], [samba_cv_have_pgo=no])
- fi
-
- # Test GCC 3.x style profile flags. This is rather more complicated so
- # we only require a minimal set of options to enable PGO.
- if test "x$samba_cv_have_pgo" = "xno" ; then
- samba_cv_have_pgo=yes
- AX_CFLAGS_GCC_OPTION(-fprofile-arcs, PGO_GENERATE_CFLAGS,
- [], [samba_cv_have_pgo=no])
- AX_CFLAGS_GCC_OPTION(-fvpt, PGO_GENERATE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-fspeculative-prefetching, PGO_GENERATE_CFLAGS,
- [], [])
- AX_CFLAGS_GCC_OPTION(-fprofile-values, PGO_GENERATE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-fbranch-probabilities, PGO_USE_CFLAGS,
- [], [samba_cv_have_pgo=no])
- AX_CFLAGS_GCC_OPTION(-fvpt, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-freorder-functions, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-fprofile-values, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-fspeculative-prefetching, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-funroll-loops, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-fpeel-loops, PGO_USE_CFLAGS, [], [])
- AX_CFLAGS_GCC_OPTION(-ftracer, PGO_USE_CFLAGS, [], [])
- fi
-
- if test -r "$enableval" ; then
- PGO_EXPERIMENT_SCRIPT="$enableval"
- else
- AC_MSG_ERROR(cannot find PGO experiment script $enableval)
- fi
-
- if test "x$samba_cv_have_pgo" = "xno" ; then
- ifPGO="#"
- else
- # Enable PGO targets in Makefile
- ifPGO=""
- # System-specific profiling tweaks
- case "$host_os" in
- *irix*) PGO_LIBS="$PGO_LIBS -linstr" ;;
- esac
- fi
-],
-[
- ifPGO="#"
-]
-)
+dnl Checks for programs.
-AC_SUBST(ifPGO)
-AC_SUBST(PGO_GENERATE_CFLAGS)
-AC_SUBST(PGO_USE_CFLAGS)
-AC_SUBST(PGO_EXPERIMENT_SCRIPT)
-AC_SUBST(PGO_LIBS)
+##
+## for some reason this macro resets the CFLAGS
+## so save and restore
+##
+OLD_CFLAGS=${CFLAGS}
+AC_PROG_CC
+CFLAGS=${OLD_CFLAGS}
-dnl Checks for programs.
+OLD_CFLAGS=${CFLAGS}
+AC_PROG_CPP
+CFLAGS=${OLD_CFLAGS}
AC_PROG_INSTALL
AC_PROG_AWK
AC_CHECK_TOOL(AR, ar)
+dnl Check if we use GNU ld
+LD=ld
+AC_PROG_LD_GNU
+
dnl Certain versions of GNU ld the default is not to have the
dnl --allow-shlib-undefined flag defined. This causes a stackload of
dnl warnings when building modules.
AC_SUBST(BROKEN_CC)
dnl Check if the C compiler understands -Werror
-AX_CFLAGS_GCC_OPTION(-Werror, Werror_FLAGS)
-
+AC_CACHE_CHECK([that the C compiler understands -Werror],samba_cv_HAVE_Werror, [
+ AC_TRY_RUN_STRICT([
+ int main(void)
+ {
+ return 0;
+ }],[-Werror],[$CPPFLAGS],[$LDFLAGS],
+ samba_cv_HAVE_Werror=yes,samba_cv_HAVE_Werror=no,samba_cv_HAVE_Werror=cross)])
+if test x"$samba_cv_HAVE_Werror" = x"yes"; then
+ Werror_FLAGS="-Werror"
+else
dnl Check if the C compiler understands -w2
-AX_CFLAGS_IRIX_OPTION(-w2, Werror_FLAGS)
+AC_CACHE_CHECK([that the C compiler understands -w2],samba_cv_HAVE_w2, [
+ AC_TRY_RUN_STRICT([
+ int main(void)
+ {
+ return 0;
+ }],[-w2],[$CPPFLAGS],[$LDFLAGS],
+ samba_cv_HAVE_w2=yes,samba_cv_HAVE_w2=no,samba_cv_HAVE_w2=cross)])
+if test x"$samba_cv_HAVE_w2" = x"yes"; then
+ Werror_FLAGS="-w2"
+fi
+fi
dnl Check if the C compiler understands volatile (it should, being ANSI).
AC_CACHE_CHECK([that the C compiler understands volatile],samba_cv_volatile, [
AC_DEFINE(HAVE_VOLATILE, 1, [Whether the C compiler understands volatile])
fi
+UNAME_S=`(uname -s) 2>/dev/null` || UNAME_S="unknown"
+AC_MSG_CHECKING(uname -s)
+AC_MSG_RESULT(${UNAME_S})
+
+UNAME_R=`(uname -r) 2>/dev/null` || UNAME_R="unknown"
+AC_MSG_CHECKING(uname -r)
+AC_MSG_RESULT(${UNAME_R})
+
+UNAME_M=`(uname -m) 2>/dev/null` || UNAME_M="unknown"
+AC_MSG_CHECKING(uname -m)
+AC_MSG_RESULT(${UNAME_M})
+
+UNAME_P=`(uname -p) 2>/dev/null` || UNAME_P="unknown"
+AC_MSG_CHECKING(uname -p)
+AC_MSG_RESULT(${UNAME_P})
+
+AC_CANONICAL_SYSTEM
+
dnl Add #include for broken IRIX header files
case "$host_os" in
*irix6*) AC_ADD_INCLUDE(<standards.h>)
# Try to work out if this is the native HPUX compiler that uses the -Ae flag.
*hpux*)
- AX_CFLAGS_HPUX_OPTION(Ae, CFLAGS,
- [ac_cv_prog_cc_Ae=yes], [ac_cv_prog_cc_Ae=no])
+ AC_PROG_CC_FLAG(Ae)
# mmap on HPUX is completely broken...
AC_DEFINE(MMAP_BLACKLIST, 1, [Whether MMAP is broken])
-
+ if test $ac_cv_prog_cc_Ae = yes; then
+ CPPFLAGS="$CPPFLAGS -Ae"
+ fi
#
# Defines needed for HPUX support.
# HPUX has bigcrypt but (sometimes?) doesn't use it for
git.samba.org / tprouty / samba.git / commitdiff