2 Unix SMB/Netbios implementation.
4 read/write to a files_struct
5 Copyright (C) Andrew Tridgell 1992-1998
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 extern int DEBUGLEVEL;
26 static BOOL setup_write_cache(files_struct *, SMB_OFF_T);
28 /****************************************************************************
29 seek a file. Try to avoid the seek if possible
30 ****************************************************************************/
32 SMB_OFF_T seek_file(files_struct *fsp,SMB_OFF_T pos)
37 if (fsp->print_file && lp_postscript(fsp->conn->service))
40 seek_ret = fsp->conn->vfs_ops.lseek(fsp->fd,pos+offset,SEEK_SET);
43 * We want to maintain the fiction that we can seek
44 * on a fifo for file system purposes. This allows
45 * people to set up UNIX fifo's that feed data to Windows
49 if((seek_ret == -1) && (errno == ESPIPE)) {
50 seek_ret = pos+offset;
54 if((seek_ret == -1) || (seek_ret != pos+offset)) {
55 DEBUG(0,("seek_file: sys_lseek failed. Error was %s\n", strerror(errno) ));
60 fsp->pos = seek_ret - offset;
62 DEBUG(10,("seek_file: requested pos = %.0f, new pos = %.0f\n",
63 (double)(pos+offset), (double)fsp->pos ));
68 /****************************************************************************
69 Read from write cache if we can.
70 ****************************************************************************/
72 static unsigned int cache_read_hits;
74 BOOL read_from_write_cache(files_struct *fsp,char *data,SMB_OFF_T pos,size_t n)
76 write_cache *wcp = fsp->wcp;
81 if(n > wcp->data_size || pos < wcp->offset || pos + n > wcp->offset + wcp->data_size)
84 memcpy(data, wcp->data + (pos - wcp->offset), n);
91 /****************************************************************************
93 ****************************************************************************/
95 ssize_t read_file(files_struct *fsp,char *data,SMB_OFF_T pos,size_t n)
97 ssize_t ret=0,readret;
99 /* you can't read from print files */
100 if (fsp->print_file) {
105 * Serve from write cache if we can.
107 if(read_from_write_cache(fsp, data, pos, n))
110 flush_write_cache(fsp, READ_FLUSH);
112 if (seek_file(fsp,pos) == -1) {
113 DEBUG(3,("read_file: Failed to seek to %.0f\n",(double)pos));
118 readret = fsp->conn->vfs_ops.read(fsp->fd,data,n);
119 if (readret > 0) ret += readret;
125 /* Write cache static counters. */
127 static unsigned int abutted_writes;
128 static unsigned int total_writes;
129 static unsigned int non_oplock_writes;
130 static unsigned int direct_writes;
131 static unsigned int init_writes;
132 static unsigned int flushed_writes;
133 static unsigned int num_perfect_writes;
134 static unsigned int flush_reasons[NUM_FLUSH_REASONS];
136 /* how many write cache buffers have been allocated */
137 static unsigned int allocated_write_caches;
138 static unsigned int num_write_caches;
140 /****************************************************************************
141 *Really* write to a file
142 ****************************************************************************/
144 static ssize_t real_write_file(files_struct *fsp,char *data,SMB_OFF_T pos, size_t n)
146 if ((pos != -1) && (seek_file(fsp,pos) == -1))
149 return write_data(fsp->fd,data,n);
152 /****************************************************************************
154 ****************************************************************************/
156 ssize_t write_file(files_struct *fsp, char *data, SMB_OFF_T pos, size_t n)
158 write_cache *wcp = fsp->wcp;
159 ssize_t total_written = 0;
162 if (fsp->print_file) {
163 return print_job_write(fsp->print_jobid, data, n);
166 if (!fsp->can_write) {
171 if (!fsp->modified) {
173 fsp->modified = True;
175 if (fsp->conn->vfs_ops.fstat(fsp->fd,&st) == 0) {
176 int dosmode = dos_mode(fsp->conn,fsp->fsp_name,&st);
177 if (MAP_ARCHIVE(fsp->conn) && !IS_DOS_ARCHIVE(dosmode)) {
178 file_chmod(fsp->conn,fsp->fsp_name,dosmode | aARCH,&st);
182 * If this is the first write and we have an exclusive oplock then setup
186 if ((fsp->oplock_type == EXCLUSIVE_OPLOCK) && !wcp) {
187 setup_write_cache(fsp, st.st_size);
194 if (!fsp->oplock_type) {
199 * If this file is level II oplocked then we need
200 * to grab the shared memory lock and inform all
201 * other files with a level II lock that they need
202 * to flush their read caches. We keep the lock over
203 * the shared memory area whilst doing this.
206 if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type)) {
207 share_mode_entry *share_list = NULL;
208 pid_t pid = getpid();
210 int num_share_modes = 0;
213 if (lock_share_entry_fsp(fsp) == False) {
214 DEBUG(0,("write_file: failed to lock share mode entry for file %s.\n", fsp->fsp_name ));
217 num_share_modes = get_share_modes(fsp->conn, fsp->dev, fsp->inode, &share_list);
219 for(i = 0; i < num_share_modes; i++) {
220 share_mode_entry *share_entry = &share_list[i];
223 * As there could have been multiple writes waiting at the lock_share_entry
224 * gate we may not be the first to enter. Hence the state of the op_types
225 * in the share mode entries may be partly NO_OPLOCK and partly LEVEL_II
226 * oplock. It will do no harm to re-send break messages to those smbd's
227 * that are still waiting their turn to remove their LEVEL_II state, and
228 * also no harm to ignore existing NO_OPLOCK states. JRA.
231 if (share_entry->op_type == NO_OPLOCK)
235 if (EXCLUSIVE_OPLOCK_TYPE(share_entry->op_type)) {
236 DEBUG(0,("write_file: PANIC. share mode entry %d is an exlusive oplock !\n", i ));
241 * Check if this is a file we have open (including the
242 * file we've been called to do write_file on. If so
243 * then break it directly without releasing the lock.
246 if (pid == share_entry->pid) {
247 files_struct *new_fsp = file_find_dit(fsp->dev, fsp->inode, &share_entry->time);
249 /* Paranoia check... */
250 if(new_fsp == NULL) {
251 DEBUG(0,("write_file: PANIC. share mode entry %d is not a local file !\n", i ));
254 oplock_break_level2(new_fsp, True, token);
259 * This is a remote file and so we send an asynchronous
263 request_oplock_break(share_entry, fsp->dev, fsp->inode);
267 free((char *)share_list);
268 unlock_share_entry_fsp(fsp);
271 /* Paranoia check... */
272 if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type)) {
273 DEBUG(0,("write_file: PANIC. File %s still has a level II oplock.\n", fsp->fsp_name));
277 if (total_writes % 500 == 0) {
278 DEBUG(3,("WRITECACHE: initwrites=%u abutted=%u flushes=%u total=%u \
279 nonop=%u allocated=%u active=%u direct=%u perfect=%u readhits=%u\n",
280 init_writes, abutted_writes, flushed_writes, total_writes, non_oplock_writes,
281 allocated_write_caches,
282 num_write_caches, direct_writes, num_perfect_writes, cache_read_hits ));
284 DEBUG(3,("WRITECACHE: SEEK=%d, READ=%d, WRITE=%d, READRAW=%d, OPLOCK=%d, CLOSE=%d, SYNC=%d\n",
285 flush_reasons[SEEK_FLUSH],
286 flush_reasons[READ_FLUSH],
287 flush_reasons[WRITE_FLUSH],
288 flush_reasons[READRAW_FLUSH],
289 flush_reasons[OPLOCK_RELEASE_FLUSH],
290 flush_reasons[CLOSE_FLUSH],
291 flush_reasons[SYNC_FLUSH] ));
296 return real_write_file(fsp, data, pos, n);
299 DEBUG(9,("write_file(fd=%d pos=%d size=%d) wofs=%d wsize=%d\n",
300 fsp->fd, (int)pos, (int)n, (int)wcp->offset, (int)wcp->data_size));
303 * If we have active cache and it isn't contiguous then we flush.
304 * NOTE: There is a small problem with running out of disk ....
307 if (wcp->data_size) {
309 BOOL cache_flush_needed = False;
311 if ((pos >= wcp->offset) && (pos <= wcp->offset + wcp->data_size)) {
314 * Start of write overlaps or abutts the existing data.
317 size_t data_used = MIN((wcp->alloc_size - (pos - wcp->offset)), n);
319 memcpy(wcp->data + (pos - wcp->offset), data, data_used);
322 * Update the current buffer size with the new data.
325 if(pos + data_used > wcp->offset + wcp->data_size)
326 wcp->data_size = pos + data_used - wcp->offset;
329 * If we used all the data then
336 cache_flush_needed = True;
339 * Move the start of data forward by the amount used,
340 * cut down the amount left by the same amount.
348 total_written = data_used;
352 } else if ((pos < wcp->offset) && (pos + n > wcp->offset) &&
353 (pos + n <= wcp->offset + wcp->alloc_size)) {
356 * End of write overlaps the existing data.
359 size_t data_used = pos + n - wcp->offset;
361 memcpy(wcp->data, data + n - data_used, data_used);
364 * Update the current buffer size with the new data.
367 if(pos + n > wcp->offset + wcp->data_size)
368 wcp->data_size = pos + n - wcp->offset;
371 * We don't need to move the start of data, but we
372 * cut down the amount left by the amount used.
378 * We cannot have used all the data here.
381 cache_flush_needed = True;
384 total_written = data_used;
388 } else if ( (pos >= wcp->file_size) &&
389 (pos > wcp->offset + wcp->data_size) &&
390 (pos < wcp->offset + wcp->alloc_size) ) {
393 * Non-contiguous write part of which fits within
394 * the cache buffer and is extending the file.
399 if(pos + n <= wcp->offset + wcp->alloc_size)
402 data_used = wcp->offset + wcp->alloc_size - pos;
405 * Fill in the non-continuous area with zeros.
408 memset(wcp->data + wcp->data_size, '\0',
409 pos - (wcp->offset + wcp->data_size) );
411 memcpy(wcp->data + (pos - wcp->offset), data, data_used);
414 * Update the current buffer size with the new data.
417 if(pos + data_used > wcp->offset + wcp->data_size)
418 wcp->data_size = pos + data_used - wcp->offset;
421 * Update the known file length.
424 wcp->file_size = wcp->offset + wcp->data_size;
427 if (set_filelen(fsp->fd, wcp->file_size) == -1) {
428 DEBUG(0,("write_file: error %s in setting file to length %.0f\n",
429 strerror(errno), (double)wcp->file_size ));
435 * If we used all the data then
442 cache_flush_needed = True;
445 * Move the start of data forward by the amount used,
446 * cut down the amount left by the same amount.
454 total_written = data_used;
461 * Write is bigger than buffer, or there is no overlap on the
465 DEBUG(9,("write_file: non cacheable write : fd = %d, pos = %.0f, len = %u, current cache pos = %.0f \
466 len = %u\n",fsp->fd, (double)pos, (unsigned int)n, (double)wcp->offset, (unsigned int)wcp->data_size ));
469 * Update the file size if needed.
472 if(pos + n > wcp->file_size)
473 wcp->file_size = pos + n;
476 * If write would fit in the cache, and is larger than
477 * the data already in the cache, flush the cache and
478 * preferentially copy the data new data into it. Otherwise
479 * just write the data directly.
482 if ( n <= wcp->alloc_size && n > wcp->data_size) {
483 cache_flush_needed = True;
486 return real_write_file(fsp, data, pos, n);
493 if(wcp->data_size > wcp->file_size)
494 wcp->file_size = wcp->data_size;
496 if (cache_flush_needed) {
499 DEBUG(3,("WRITE_FLUSH:%d: due to noncontinuous write: fd = %d, size = %.0f, pos = %.0f, \
500 n = %u, wcp->offset=%.0f, wcp->data_size=%u\n",
501 write_path, fsp->fd, (double)wcp->file_size, (double)pos, (unsigned int)n,
502 (double)wcp->offset, (unsigned int)wcp->data_size ));
504 flush_write_cache(fsp, WRITE_FLUSH);
509 * If the write request is bigger than the cache
510 * size, write it all out.
513 if (n > wcp->alloc_size ) {
514 if(real_write_file(fsp, data, pos, n) == -1)
517 return total_written + n;
521 * If there's any data left, cache it.
525 if (wcp->data_size) {
527 DEBUG(9,("abutted write (%u)\n", abutted_writes));
531 memcpy(wcp->data+wcp->data_size, data, n);
532 if (wcp->data_size == 0) {
537 DEBUG(9,("cache return %u\n", (unsigned int)n));
539 return total_written; /* .... that's a write :) */
542 return total_written;
545 /****************************************************************************
546 Delete the write cache structure.
547 ****************************************************************************/
549 void delete_write_cache(files_struct *fsp)
556 if(!(wcp = fsp->wcp))
559 allocated_write_caches--;
561 SMB_ASSERT(wcp->data_size == 0);
569 /****************************************************************************
570 Setup the write cache structure.
571 ****************************************************************************/
573 static BOOL setup_write_cache(files_struct *fsp, SMB_OFF_T file_size)
575 ssize_t alloc_size = lp_write_cache_size(SNUM(fsp->conn));
578 if (allocated_write_caches >= MAX_WRITE_CACHES) return False;
580 if(alloc_size == 0 || fsp->wcp)
583 if((wcp = (write_cache *)malloc(sizeof(write_cache))) == NULL) {
584 DEBUG(0,("setup_write_cache: malloc fail.\n"));
588 wcp->file_size = file_size;
590 wcp->alloc_size = alloc_size;
592 if((wcp->data = malloc(wcp->alloc_size)) == NULL) {
593 DEBUG(0,("setup_write_cache: malloc fail for buffer size %u.\n",
594 (unsigned int)wcp->alloc_size ));
600 allocated_write_caches++;
605 /****************************************************************************
606 Cope with a size change.
607 ****************************************************************************/
609 void set_filelen_write_cache(files_struct *fsp, SMB_OFF_T file_size)
612 flush_write_cache(fsp, SIZECHANGE_FLUSH);
613 fsp->wcp->file_size = file_size;
617 /*******************************************************************
618 Flush a write cache struct to disk.
619 ********************************************************************/
621 ssize_t flush_write_cache(files_struct *fsp, enum flush_reason_enum reason)
623 write_cache *wcp = fsp->wcp;
626 if(!wcp || !wcp->data_size)
629 data_size = wcp->data_size;
634 flush_reasons[(int)reason]++;
636 DEBUG(9,("flushing write cache: fd = %d, off=%.0f, size=%u\n",
637 fsp->fd, (double)wcp->offset, (unsigned int)data_size));
639 if(data_size == wcp->alloc_size)
640 num_perfect_writes++;
642 return real_write_file(fsp, wcp->data, wcp->offset, data_size);
645 /*******************************************************************
647 ********************************************************************/
649 void sys_fsync_file(connection_struct *conn, files_struct *fsp)
651 if(lp_strict_sync(SNUM(conn)) && fsp->fd != -1) {
652 flush_write_cache(fsp, SYNC_FLUSH);
653 conn->vfs_ops.fsync(fsp->fd);