*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
+ * the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/* Since the SPOOLSS rpc routines are basically DOS 16-bit calls wrapped
/* in printing/nt_printing.c */
-extern STANDARD_MAPPING printer_std_mapping, printserver_std_mapping;
+extern struct standard_mapping printer_std_mapping, printserver_std_mapping;
/* API table for Xcv Monitor functions */
if ( (ret = smbrun(command, NULL)) == 0 ) {
/* Tell everyone we updated smb.conf. */
message_send_all(smbd_messaging_context(),
- MSG_SMB_CONF_UPDATED, NULL, 0, False, NULL);
+ MSG_SMB_CONF_UPDATED, NULL, 0, NULL);
}
if ( is_print_op )
/* go ahead and re-read the services immediately */
reload_services( False );
- if ( share_defined( sharename ) )
+ if ( lp_servicenumber( sharename ) < 0 )
return WERR_ACCESS_DENIED;
return WERR_OK;
case SPLHND_PRINTER:
DEBUG(4,("short name:%s\n", Printer->sharename));
*number = print_queue_snum(Printer->sharename);
- if ((*number != -1) && (params != NULL)) {
- *params = get_share_params(tmp_talloc_ctx(),
- Printer->sharename);
- if (*params == NULL) {
- return False;
- }
- }
return (*number != -1);
case SPLHND_SERVER:
return False;
/* some sanity check because you can open a printer or a print server */
/* aka: \\server\printer or \\server */
- unistr2_to_ascii(name, q_u->printername, sizeof(name)-1);
+ unistr2_to_ascii(name, q_u->printername, sizeof(name));
DEBUGADD(3,("checking name: %s\n",name));
return WERR_ACCESS_DENIED;
}
- unistr2_to_ascii(driver, &q_u->driver, sizeof(driver)-1 );
- unistr2_to_ascii(arch, &q_u->arch, sizeof(arch)-1 );
+ unistr2_to_ascii(driver, &q_u->driver, sizeof(driver));
+ unistr2_to_ascii(arch, &q_u->arch, sizeof(arch));
/* check that we have a valid driver name first */
return WERR_ACCESS_DENIED;
}
- unistr2_to_ascii(driver, &q_u->driver, sizeof(driver)-1 );
- unistr2_to_ascii(arch, &q_u->arch, sizeof(arch)-1 );
+ unistr2_to_ascii(driver, &q_u->driver, sizeof(driver));
+ unistr2_to_ascii(arch, &q_u->arch, sizeof(arch));
/* check that we have a valid driver name first */
if ((version=get_version_id(arch)) == -1) {
*type = REG_DWORD;
if ( !(*data = TALLOC_ARRAY(ctx, uint8, sizeof(uint32) )) )
return WERR_NOMEM;
+ SIVAL(*data, 0, 0x00);
*needed = 0x4;
return WERR_OK;
}
goto done;
}
- unistr2_to_ascii(value, valuename, sizeof(value)-1);
+ unistr2_to_ascii(value, valuename, sizeof(value));
if ( Printer->printer_type == SPLHND_SERVER )
status = getprinterdata_printer_server( p->mem_ctx, value, type, data, needed, *out_size );
Printer->notify.option=dup_spool_notify_option(option);
unistr2_to_ascii(Printer->notify.localmachine, localmachine,
- sizeof(Printer->notify.localmachine)-1);
+ sizeof(Printer->notify.localmachine));
/* Connect to the client machine and send a ReplyOpenPrinter */
* fill a printer_info_0 struct
********************************************************************/
-static BOOL construct_printer_info_0(Printer_entry *print_hnd,
- PRINTER_INFO_0 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_0(Printer_entry *print_hnd, PRINTER_INFO_0 *printer, int snum)
{
pstring chaine;
int count;
time_t setuptime;
print_status_struct status;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
- count = print_queue_length(params->service, &status);
+ count = print_queue_length(snum, &status);
/* check if we already have a counter for this printer */
for(session_counter = counter_list; session_counter; session_counter = session_counter->next) {
- if (session_counter->snum == params->service)
+ if (session_counter->snum == snum)
break;
}
return False;
}
ZERO_STRUCTP(session_counter);
- session_counter->snum=params->service;
+ session_counter->snum=snum;
session_counter->counter=0;
DLIST_ADD(counter_list, session_counter);
}
* construct_printer_info_1
* fill a printer_info_1 struct
********************************************************************/
-static BOOL construct_printer_info_1(Printer_entry *print_hnd, uint32 flags,
- PRINTER_INFO_1 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_1(Printer_entry *print_hnd, uint32 flags, PRINTER_INFO_1 *printer, int snum)
{
pstring chaine;
pstring chaine2;
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
printer->flags=flags;
if (*ntprinter->info_2->comment == '\0') {
- init_unistr(&printer->comment, lp_comment(params->service));
+ init_unistr(&printer->comment, lp_comment(snum));
slprintf(chaine,sizeof(chaine)-1,"%s,%s,%s", ntprinter->info_2->printername,
- ntprinter->info_2->drivername,
- lp_comment(params->service));
+ ntprinter->info_2->drivername, lp_comment(snum));
}
else {
init_unistr(&printer->comment, ntprinter->info_2->comment); /* saved comment. */
DEBUGADD(8,("getting printer characteristics\n"));
- if (!W_ERROR_IS_OK(get_a_printer(NULL, &printer, 2, servicename)))
+ if (!W_ERROR_IS_OK(get_a_printer(NULL, &printer, 2, servicename)))
return NULL;
if ( !printer->info_2->devmode ) {
* fill a printer_info_2 struct
********************************************************************/
-static BOOL construct_printer_info_2(Printer_entry *print_hnd,
- PRINTER_INFO_2 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_2(Printer_entry *print_hnd, PRINTER_INFO_2 *printer, int snum)
{
int count;
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
print_status_struct status;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
- count = print_queue_length(params->service, &status);
+ count = print_queue_length(snum, &status);
init_unistr(&printer->servername, ntprinter->info_2->servername); /* servername*/
init_unistr(&printer->printername, ntprinter->info_2->printername); /* printername*/
- init_unistr(&printer->sharename, lp_servicename(params->service)); /* sharename */
+ init_unistr(&printer->sharename, lp_servicename(snum)); /* sharename */
init_unistr(&printer->portname, ntprinter->info_2->portname); /* port */
init_unistr(&printer->drivername, ntprinter->info_2->drivername); /* drivername */
if (*ntprinter->info_2->comment == '\0')
- init_unistr(&printer->comment, lp_comment(params->service)); /* comment */
+ init_unistr(&printer->comment, lp_comment(snum)); /* comment */
else
init_unistr(&printer->comment, ntprinter->info_2->comment); /* saved comment. */
printer->averageppm = ntprinter->info_2->averageppm; /* average pages per minute */
if ( !(printer->devmode = construct_dev_mode(
- lp_const_servicename(params->service))) )
+ lp_const_servicename(snum))) )
DEBUG(8, ("Returning NULL Devicemode!\n"));
printer->secdesc = NULL;
/* don't use talloc_steal() here unless you do a deep steal of all
the SEC_DESC members */
- printer->secdesc = dup_sec_desc( get_talloc_ctx(),
+ printer->secdesc = dup_sec_desc( talloc_tos(),
ntprinter->info_2->secdesc_buf->sd );
}
* fill a printer_info_3 struct
********************************************************************/
-static BOOL construct_printer_info_3(Printer_entry *print_hnd,
- PRINTER_INFO_3 **pp_printer,
- const struct share_params *params)
+static BOOL construct_printer_info_3(Printer_entry *print_hnd, PRINTER_INFO_3 **pp_printer, int snum)
{
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
PRINTER_INFO_3 *printer = NULL;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
*pp_printer = NULL;
/* don't use talloc_steal() here unless you do a deep steal of all
the SEC_DESC members */
- printer->secdesc = dup_sec_desc( get_talloc_ctx(),
+ printer->secdesc = dup_sec_desc( talloc_tos(),
ntprinter->info_2->secdesc_buf->sd );
}
* fill a printer_info_4 struct
********************************************************************/
-static BOOL construct_printer_info_4(Printer_entry *print_hnd,
- PRINTER_INFO_4 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_4(Printer_entry *print_hnd, PRINTER_INFO_4 *printer, int snum)
{
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
init_unistr(&printer->printername, ntprinter->info_2->printername); /* printername*/
* fill a printer_info_5 struct
********************************************************************/
-static BOOL construct_printer_info_5(Printer_entry *print_hnd,
- PRINTER_INFO_5 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_5(Printer_entry *print_hnd, PRINTER_INFO_5 *printer, int snum)
{
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
- if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2, lp_const_servicename(snum))))
return False;
init_unistr(&printer->printername, ntprinter->info_2->printername);
static BOOL construct_printer_info_6(Printer_entry *print_hnd,
PRINTER_INFO_6 *printer,
- const struct share_params *params)
+ int snum)
{
NT_PRINTER_INFO_LEVEL *ntprinter = NULL;
int count;
print_status_struct status;
if (!W_ERROR_IS_OK(get_a_printer(print_hnd, &ntprinter, 2,
- lp_const_servicename(params->service))))
+ lp_const_servicename(snum))))
return False;
- count = print_queue_length(params->service, &status);
+ count = print_queue_length(snum, &status);
printer->status = nt_printq_status(status.status);
* fill a printer_info_7 struct
********************************************************************/
-static BOOL construct_printer_info_7(Printer_entry *print_hnd,
- PRINTER_INFO_7 *printer,
- const struct share_params *params)
+static BOOL construct_printer_info_7(Printer_entry *print_hnd, PRINTER_INFO_7 *printer, int snum)
{
char *guid_str = NULL;
struct GUID guid;
- if (is_printer_published(print_hnd, params->service, &guid)) {
+ if (is_printer_published(print_hnd, snum, &guid)) {
asprintf(&guid_str, "{%s}", smb_uuid_string_static(guid));
strupper_m(guid_str);
init_unistr(&printer->guid, guid_str);
static WERROR enum_all_printers_info_1(uint32 flags, RPC_BUFFER *buffer, uint32 offered, uint32 *needed, uint32 *returned)
{
+ int snum;
int i;
- struct share_iterator *shares;
- struct share_params *printer;
+ int n_services=lp_numservices();
PRINTER_INFO_1 *printers=NULL;
+ PRINTER_INFO_1 current_prt;
WERROR result = WERR_OK;
DEBUG(4,("enum_all_printers_info_1\n"));
- if (!(shares = share_list_all(NULL))) {
- DEBUG(5, ("Could not list printers\n"));
- return WERR_ACCESS_DENIED;
- }
+ for (snum=0; snum<n_services; snum++) {
+ if (lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) ) {
+ DEBUG(4,("Found a printer in smb.conf: %s[%x]\n", lp_servicename(snum), snum));
- while ((printer = next_printer(shares)) != NULL) {
- PRINTER_INFO_1 current_prt;
-
- DEBUG(4,("Found a printer in smb.conf: %s\n",
- lp_servicename(printer->service)));
-
- if (!construct_printer_info_1(NULL, flags, ¤t_prt,
- printer)) {
- continue;
- }
+ if (construct_printer_info_1(NULL, flags, ¤t_prt, snum)) {
+ if((printers=SMB_REALLOC_ARRAY(printers, PRINTER_INFO_1, *returned +1)) == NULL) {
+ DEBUG(2,("enum_all_printers_info_1: failed to enlarge printers buffer!\n"));
+ *returned=0;
+ return WERR_NOMEM;
+ }
+ DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_1\n", *returned));
- if((printers=SMB_REALLOC_ARRAY(printers, PRINTER_INFO_1,
- *returned +1)) == NULL) {
- DEBUG(2,("enum_all_printers_info_1: failed to enlarge "
- "printers buffer!\n"));
- *returned=0;
- TALLOC_FREE(shares);
- return WERR_NOMEM;
+ memcpy(&printers[*returned], ¤t_prt, sizeof(PRINTER_INFO_1));
+ (*returned)++;
+ }
}
- DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_1\n",
- *returned));
-
- memcpy(&printers[*returned], ¤t_prt,
- sizeof(PRINTER_INFO_1));
- (*returned)++;
- TALLOC_FREE(printer);
}
/* check the required size. */
/* clear memory */
SAFE_FREE(printers);
- TALLOC_FREE(shares);
if ( !W_ERROR_IS_OK(result) )
*returned = 0;
static WERROR enum_all_printers_info_2(RPC_BUFFER *buffer, uint32 offered, uint32 *needed, uint32 *returned)
{
+ int snum;
int i;
- struct share_iterator *shares;
- struct share_params *printer;
+ int n_services=lp_numservices();
PRINTER_INFO_2 *printers=NULL;
+ PRINTER_INFO_2 current_prt;
WERROR result = WERR_OK;
*returned = 0;
- if (!(shares = share_list_all(NULL))) {
- DEBUG(5, ("Could not list printers\n"));
- return WERR_ACCESS_DENIED;
- }
+ for (snum=0; snum<n_services; snum++) {
+ if (lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) ) {
+ DEBUG(4,("Found a printer in smb.conf: %s[%x]\n", lp_servicename(snum), snum));
+
+ if (construct_printer_info_2(NULL, ¤t_prt, snum)) {
+ if ( !(printers=SMB_REALLOC_ARRAY(printers, PRINTER_INFO_2, *returned +1)) ) {
+ DEBUG(2,("enum_all_printers_info_2: failed to enlarge printers buffer!\n"));
+ *returned = 0;
+ return WERR_NOMEM;
+ }
- while ((printer = next_printer(shares)) != NULL) {
- PRINTER_INFO_2 current_prt;
+ DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_2\n", *returned + 1));
- DEBUG(4,("Found a printer in smb.conf: %s\n",
- lp_servicename(printer->service)));
+ memcpy(&printers[*returned], ¤t_prt, sizeof(PRINTER_INFO_2));
- if (!construct_printer_info_2(NULL, ¤t_prt,
- printer)) {
- continue;
- }
- if ( !(printers=SMB_REALLOC_ARRAY(printers, PRINTER_INFO_2,
- *returned +1)) ) {
- DEBUG(2,("enum_all_printers_info_2: failed to enlarge "
- "printers buffer!\n"));
- *returned = 0;
- TALLOC_FREE(shares);
- return WERR_NOMEM;
+ (*returned)++;
+ }
}
-
- DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_2\n",
- *returned + 1));
-
- memcpy(&printers[*returned], ¤t_prt,
- sizeof(PRINTER_INFO_2));
- (*returned)++;
- TALLOC_FREE(printer);
}
/* check the required size. */
free_devmode(printers[i].devmode);
SAFE_FREE(printers);
- TALLOC_FREE(shares);
if ( !W_ERROR_IS_OK(result) )
*returned = 0;
* Level 5: same as Level 2
*/
- unistr2_to_ascii(name, servername, sizeof(name)-1);
+ unistr2_to_ascii(name, servername, sizeof(name));
strupper_m(name);
switch (level) {
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_0(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_0(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_0 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_0)) == NULL)
return WERR_NOMEM;
- construct_printer_info_0(print_hnd, printer, params);
+ construct_printer_info_0(print_hnd, printer, snum);
/* check the required size. */
*needed += spoolss_size_printer_info_0(printer);
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_1(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_1(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_1 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_1)) == NULL)
return WERR_NOMEM;
- construct_printer_info_1(print_hnd, PRINTER_ENUM_ICON8, printer,
- params);
+ construct_printer_info_1(print_hnd, PRINTER_ENUM_ICON8, printer, snum);
/* check the required size. */
*needed += spoolss_size_printer_info_1(printer);
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_2(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_2(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_2 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_2))==NULL)
return WERR_NOMEM;
- construct_printer_info_2(print_hnd, printer, params);
+ construct_printer_info_2(print_hnd, printer, snum);
/* check the required size. */
*needed += spoolss_size_printer_info_2(printer);
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_3(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_3(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_3 *printer=NULL;
WERROR result = WERR_OK;
- if (!construct_printer_info_3(print_hnd, &printer, params))
+ if (!construct_printer_info_3(print_hnd, &printer, snum))
return WERR_NOMEM;
/* check the required size. */
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_4(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_4(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_4 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_4))==NULL)
return WERR_NOMEM;
- if (!construct_printer_info_4(print_hnd, printer, params)) {
+ if (!construct_printer_info_4(print_hnd, printer, snum)) {
SAFE_FREE(printer);
return WERR_NOMEM;
}
/****************************************************************************
****************************************************************************/
-static WERROR getprinter_level_5(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_5(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_5 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_5))==NULL)
return WERR_NOMEM;
- if (!construct_printer_info_5(print_hnd, printer, params)) {
+ if (!construct_printer_info_5(print_hnd, printer, snum)) {
free_printer_info_5(printer);
return WERR_NOMEM;
}
}
static WERROR getprinter_level_6(Printer_entry *print_hnd,
- const struct share_params *params,
+ int snum,
RPC_BUFFER *buffer, uint32 offered,
uint32 *needed)
{
return WERR_NOMEM;
}
- if (!construct_printer_info_6(print_hnd, printer, params)) {
+ if (!construct_printer_info_6(print_hnd, printer, snum)) {
free_printer_info_6(printer);
return WERR_NOMEM;
}
return result;
}
-static WERROR getprinter_level_7(Printer_entry *print_hnd,
- const struct share_params *params,
- RPC_BUFFER *buffer, uint32 offered,
- uint32 *needed)
+static WERROR getprinter_level_7(Printer_entry *print_hnd, int snum, RPC_BUFFER *buffer, uint32 offered, uint32 *needed)
{
PRINTER_INFO_7 *printer=NULL;
WERROR result = WERR_OK;
if((printer=SMB_MALLOC_P(PRINTER_INFO_7))==NULL)
return WERR_NOMEM;
- if (!construct_printer_info_7(print_hnd, printer, params))
+ if (!construct_printer_info_7(print_hnd, printer, snum))
return WERR_NOMEM;
/* check the required size. */
uint32 offered = q_u->offered;
uint32 *needed = &r_u->needed;
Printer_entry *Printer=find_printer_index_by_hnd(p, handle);
- struct share_params *params;
int snum;
*needed=0;
- if (!get_printer_snum(p, handle, &snum, ¶ms))
+ if (!get_printer_snum(p, handle, &snum, NULL))
return WERR_BADFID;
switch (level) {
case 0:
- return getprinter_level_0(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_0(Printer, snum, buffer, offered, needed);
case 1:
- return getprinter_level_1(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_1(Printer, snum, buffer, offered, needed);
case 2:
- return getprinter_level_2(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_2(Printer, snum, buffer, offered, needed);
case 3:
- return getprinter_level_3(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_3(Printer, snum, buffer, offered, needed);
case 4:
- return getprinter_level_4(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_4(Printer, snum, buffer, offered, needed);
case 5:
- return getprinter_level_5(Printer, params, buffer, offered,
- needed);
- case 6:
- return getprinter_level_6(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_5(Printer, snum, buffer, offered, needed);
+ case 6:
+ return getprinter_level_6(Printer, snum, buffer, offered, needed);
case 7:
- return getprinter_level_7(Printer, params, buffer, offered,
- needed);
+ return getprinter_level_7(Printer, snum, buffer, offered, needed);
}
return WERR_UNKNOWN_LEVEL;
}
*serverminorversion = 0;
fstrcpy(servername, get_server_name( printer ));
- unistr2_to_ascii(architecture, uni_arch, sizeof(architecture)-1);
+ unistr2_to_ascii(architecture, uni_arch, sizeof(architecture));
if (!get_printer_snum(p, handle, &snum, NULL))
return WERR_BADFID;
if ( (ret = smbrun(command, &fd)) == 0 ) {
/* Tell everyone we updated smb.conf. */
message_send_all(smbd_messaging_context(),
- MSG_SMB_CONF_UPDATED, NULL, 0, False, NULL);
+ MSG_SMB_CONF_UPDATED, NULL, 0, NULL);
}
if ( is_print_op )
*needed = 0;
*returned = 0;
- unistr2_to_ascii(architecture, &q_u->environment, sizeof(architecture)-1);
- unistr2_to_ascii(servername, &q_u->name, sizeof(servername)-1);
+ unistr2_to_ascii(architecture, &q_u->environment, sizeof(architecture));
+ unistr2_to_ascii(servername, &q_u->name, sizeof(servername));
if ( !is_myname_or_ipaddr( servername ) )
return WERR_UNKNOWN_PRINTER_DRIVER;
rpcbuf_move(q_u->buffer, &r_u->buffer);
buffer = r_u->buffer;
- unistr2_to_ascii(form_name, uni_formname, sizeof(form_name)-1);
+ unistr2_to_ascii(form_name, uni_formname, sizeof(form_name));
DEBUG(4,("_spoolss_getform\n"));
DEBUGADD(5,("Offered buffer size [%d]\n", offered));
/* if no hook then just fill in the default port */
if ( !*cmd ) {
- qlines = SMB_MALLOC_ARRAY( char*, 2 );
- qlines[0] = SMB_STRDUP( SAMBA_PRINTER_PORT_NAME );
+ if (!(qlines = SMB_MALLOC_ARRAY( char*, 2 ))) {
+ return WERR_NOMEM;
+ }
+ if (!(qlines[0] = SMB_STRDUP( SAMBA_PRINTER_PORT_NAME ))) {
+ SAFE_FREE(qlines);
+ return WERR_NOMEM;
+ }
qlines[1] = NULL;
numlines = 1;
}
DRIVER_DIRECTORY_1 *info=NULL;
WERROR result = WERR_OK;
- unistr2_to_ascii(servername, name, sizeof(servername)-1);
- unistr2_to_ascii(long_archi, uni_environment, sizeof(long_archi)-1);
+ unistr2_to_ascii(servername, name, sizeof(servername));
+ unistr2_to_ascii(long_archi, uni_environment, sizeof(long_archi));
/* check for beginning double '\'s and that the server
long enough */
if (!W_ERROR_IS_OK(status))
return status;
- unistr2_to_ascii( valuename, value, sizeof(valuename)-1 );
+ unistr2_to_ascii(valuename, value, sizeof(valuename));
/*
* When client side code sets a magic printer data key, detect it and save
if (!W_ERROR_IS_OK(status))
return status;
- unistr2_to_ascii( valuename, value, sizeof(valuename)-1 );
+ unistr2_to_ascii(valuename, value, sizeof(valuename));
status = delete_printer_dataex( printer, SPOOL_PRINTERDATA_KEY, valuename );
DEBUG(4,("_spoolss_getprinterdataex\n"));
- unistr2_to_ascii(keyname, &q_u->keyname, sizeof(keyname) - 1);
- unistr2_to_ascii(valuename, &q_u->valuename, sizeof(valuename) - 1);
+ unistr2_to_ascii(keyname, &q_u->keyname, sizeof(keyname));
+ unistr2_to_ascii(valuename, &q_u->valuename, sizeof(valuename));
DEBUG(10, ("_spoolss_getprinterdataex: key => [%s], value => [%s]\n",
keyname, valuename));
if (!W_ERROR_IS_OK(status))
return status;
- unistr2_to_ascii( valuename, &q_u->value, sizeof(valuename) - 1);
- unistr2_to_ascii( keyname, &q_u->key, sizeof(keyname) - 1);
+ unistr2_to_ascii( valuename, &q_u->value, sizeof(valuename));
+ unistr2_to_ascii( keyname, &q_u->key, sizeof(keyname));
/* check for OID in valuename */
if (!W_ERROR_IS_OK(status))
return status;
- unistr2_to_ascii( valuename, value, sizeof(valuename)-1 );
- unistr2_to_ascii( keyname, key, sizeof(keyname)-1 );
+ unistr2_to_ascii(valuename, value, sizeof(valuename));
+ unistr2_to_ascii(keyname, key, sizeof(keyname));
status = delete_printer_dataex( printer, keyname, valuename );
/* get the list of subkey names */
- unistr2_to_ascii( key, &q_u->key, sizeof(key)-1 );
+ unistr2_to_ascii(key, &q_u->key, sizeof(key));
data = printer->info_2->data;
num_keys = get_printer_subkeys( data, key, &keynames );
/* delete the key and all subneys */
- unistr2_to_ascii(key, &q_u->keyname, sizeof(key) - 1);
+ unistr2_to_ascii(key, &q_u->keyname, sizeof(key));
status = delete_all_printer_data( printer->info_2, key );
* --jerry
*/
- unistr2_to_ascii(key, &q_u->key, sizeof(key) - 1);
+ unistr2_to_ascii(key, &q_u->key, sizeof(key));
if ( !strlen(key) ) {
result = WERR_INVALID_PARAM;
goto done;
p_data = printer->info_2->data;
- unistr2_to_ascii(key, &q_u->key, sizeof(key) - 1);
+ unistr2_to_ascii(key, &q_u->key, sizeof(key));
if ( (key_index = lookup_printerkey( p_data, key)) == -1 )
{
DEBUG(10,("_spoolss_enumprinterdataex: Unknown keyname [%s]\n", key));
PRINTPROCESSOR_DIRECTORY_1 *info=NULL;
WERROR result = WERR_OK;
- unistr2_to_ascii(long_archi, environment, sizeof(long_archi)-1);
+ unistr2_to_ascii(long_archi, environment, sizeof(long_archi));
if (!get_short_archi(long_archi))
return WERR_INVALID_ENVIRONMENT;
git.samba.org / sfrench / samba-autobuild / .git / blobdiff