From 842d416654ebbcae86c32c0a354da9f649335410 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Thu, 6 Oct 2016 19:22:20 +0300 Subject: [PATCH] drm/i915: Create a struct to hold information about the broxton phys Information about which phy is dual channel is hardcoded in the phy init sequence. Split that to a separate struct so the init sequence is more generic. v2: Restore mangled part that ended up in following patch. (Imre) Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/9102f4c984044126057e4fdd1b91a615ff25fae6.1475770848.git-series.ander.conselvan.de.oliveira@intel.com --- drivers/gpu/drm/i915/i915_reg.h | 9 +++- drivers/gpu/drm/i915/intel_dpio_phy.c | 65 ++++++++++++++++++++++----- 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2f504f6a1c51..44683f9286a1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1307,8 +1307,13 @@ enum skl_disp_power_wells { #define BXT_PORT_CL1CM_DW30(phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC, \ _PORT_CL1CM_DW30_A) -/* Defined for PHY0 only */ -#define BXT_PORT_CL2CM_DW6_BC _MMIO(0x6C358) +/* The spec defines this only for BXT PHY0, but lets assume that this + * would exist for PHY1 too if it had a second channel. + */ +#define _PORT_CL2CM_DW6_A 0x162358 +#define _PORT_CL2CM_DW6_BC 0x6C358 +#define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC, \ + _PORT_CL2CM_DW6_A) #define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28) /* BXT PHY Ref registers */ diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c index 2a18724f9c3b..1b1fba16d4e9 100644 --- a/drivers/gpu/drm/i915/intel_dpio_phy.c +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c @@ -114,6 +114,50 @@ * ----------------- */ +/** + * struct bxt_ddi_phy_info - Hold info for a broxton DDI phy + */ +struct bxt_ddi_phy_info { + /** + * @dual_channel: true if this phy has a second channel. + */ + bool dual_channel; + + /** + * @channel: struct containing per channel information. + */ + struct { + /** + * @port: which port maps to this channel. + */ + enum port port; + } channel[2]; +}; + +static const struct bxt_ddi_phy_info bxt_ddi_phy_info[] = { + [DPIO_PHY0] = { + .dual_channel = true, + + .channel = { + [DPIO_CH0] = { .port = PORT_B }, + [DPIO_CH1] = { .port = PORT_C }, + } + }, + [DPIO_PHY1] = { + .dual_channel = false, + + .channel = { + [DPIO_CH0] = { .port = PORT_A }, + } + }, +}; + +static u32 bxt_phy_port_mask(const struct bxt_ddi_phy_info *phy_info) +{ + return (phy_info->dual_channel * BIT(phy_info->channel[DPIO_CH1].port)) | + BIT(phy_info->channel[DPIO_CH0].port); +} + void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv, enum port port, u32 margin, u32 scale, u32 enable, u32 deemphasis) @@ -156,6 +200,7 @@ void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv, bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, enum dpio_phy phy) { + const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy]; enum port port; if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) @@ -183,9 +228,7 @@ bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, return false; } - for_each_port_masked(port, - phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) : - BIT(PORT_A)) { + for_each_port_masked(port, bxt_phy_port_mask(phy_info)) { u32 tmp = I915_READ(BXT_PHY_CTL(port)); if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) { @@ -220,6 +263,7 @@ static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv, void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) { + const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy]; u32 val; if (bxt_ddi_phy_is_enabled(dev_priv, phy)) { @@ -272,10 +316,10 @@ void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) SUS_CLK_CONFIG; I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val); - if (phy == DPIO_PHY0) { - val = I915_READ(BXT_PORT_CL2CM_DW6_BC); + if (phy_info->dual_channel) { + val = I915_READ(BXT_PORT_CL2CM_DW6(phy)); val |= DW6_OLDO_DYN_PWR_DOWN_EN; - I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val); + I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val); } val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); @@ -290,7 +334,7 @@ void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) * FIXME: Clarify programming of the following, the register is * read-only with bit 6 fixed at 0 at least in stepping A. */ - if (phy == DPIO_PHY1) + if (!phy_info->dual_channel) val |= OCL2_LDOFUSE_PWR_DIS; I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); @@ -363,6 +407,7 @@ __phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy) { + const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy]; uint32_t mask; bool ok; @@ -388,10 +433,10 @@ bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, "BXT_PORT_CL1CM_DW28(%d)", phy); - if (phy == DPIO_PHY0) - ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, + if (phy_info->dual_channel) + ok &= _CHK(BXT_PORT_CL2CM_DW6(phy), DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, - "BXT_PORT_CL2CM_DW6_BC"); + "BXT_PORT_CL2CM_DW6(%d)", phy); /* * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, -- 2.34.1