From 5ec6fd39f5f23278c6c2f528b412dcff6a29eb59 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 20 Jan 2020 20:33:28 +0100 Subject: [PATCH] ARM: s3c24xx: Switch to atomic pwm API in rx1950 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Stop using the legacy PWM API which only still exists because there are some users left. Note this change make use of the fact that the value of struct pwm_state::duty_cycle doesn't matter for a disabled PWM and so its value can stay constant simplifying the code a bit. A side effect of the conversion is that the pwm isn't stopped in rx1950_backlight_init() by the call to pwm_apply_args() just before reenabling it when rx1950_lcd_power(1) is called. Signed-off-by: Uwe Kleine-König Reviewed-by: Vasily Khoruzhick Signed-off-by: Krzysztof Kozlowski --- arch/arm/mach-s3c24xx/mach-rx1950.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 29f9b345a531..03d8f27cdc32 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -377,6 +377,7 @@ static struct pwm_lookup rx1950_pwm_lookup[] = { }; static struct pwm_device *lcd_pwm; +static struct pwm_state lcd_pwm_state; static void rx1950_lcd_power(int enable) { @@ -429,15 +430,16 @@ static void rx1950_lcd_power(int enable) /* GPB1->OUTPUT, GPB1->0 */ gpio_direction_output(S3C2410_GPB(1), 0); - pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD); - pwm_disable(lcd_pwm); + + lcd_pwm_state.enabled = false; + pwm_apply_state(lcd_pwm, &lcd_pwm_state); /* GPC0->0, GPC10->0 */ gpio_direction_output(S3C2410_GPC(0), 0); gpio_direction_output(S3C2410_GPC(10), 0); } else { - pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD); - pwm_enable(lcd_pwm); + lcd_pwm_state.enabled = true; + pwm_apply_state(lcd_pwm, &lcd_pwm_state); gpio_direction_output(S3C2410_GPC(0), 1); gpio_direction_output(S3C2410_GPC(5), 1); @@ -493,10 +495,13 @@ static int rx1950_backlight_init(struct device *dev) } /* - * FIXME: pwm_apply_args() should be removed when switching to - * the atomic PWM API. + * This is only required to initialize .polarity; all other values are + * fixed in this driver. */ - pwm_apply_args(lcd_pwm); + pwm_init_state(lcd_pwm, &lcd_pwm_state); + + lcd_pwm_state.period = LCD_PWM_PERIOD; + lcd_pwm_state.duty_cycle = LCD_PWM_DUTY; rx1950_lcd_power(1); rx1950_bl_power(1); -- 2.34.1