sfrench/cifs-2.6.git
15 years agoMerge tag 'r8169-upstream-20061204-00' of git://electric-eye.fr.zoreil.com/home/romie...
Jeff Garzik [Thu, 7 Dec 2006 10:05:58 +0000 (05:05 -0500)]
Merge tag 'r8169-upstream-20061204-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream

15 years agoMerge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
Jeff Garzik [Thu, 7 Dec 2006 10:02:40 +0000 (05:02 -0500)]
Merge branch 'upstream' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream

Conflicts:

drivers/net/wireless/zd1211rw/zd_mac.h
net/ieee80211/softmac/ieee80211softmac_assoc.c

15 years ago[PATCH] sky2: sparse warnings
Stephen Hemminger [Tue, 5 Dec 2006 20:03:41 +0000 (12:03 -0800)]
[PATCH] sky2: sparse warnings

Get rid of sparse warnings in sky2 driver because of mixed enum
usage.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] skge: fix sparse warnings
Stephen Hemminger [Tue, 5 Dec 2006 20:02:50 +0000 (12:02 -0800)]
[PATCH] skge: fix sparse warnings

Fix sparse warnings from using enum as part of arithmetic
expression, and comment indentation fixes

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] myri10ge: write as 2 32-byte blocks in myri10ge_submit_8rx
Brice Goglin [Tue, 5 Dec 2006 16:26:27 +0000 (17:26 +0100)]
[PATCH] myri10ge: write as 2 32-byte blocks in myri10ge_submit_8rx

In the myri10ge_submit_8rx() routine, write the 64 byte request block as
2 32-byte blocks so that it is handled by the hardware pio write handler
if write-combining is enabled.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] sky2: receive queue watermark tweak
Stephen Hemminger [Tue, 5 Dec 2006 01:08:19 +0000 (17:08 -0800)]
[PATCH] sky2: receive queue watermark tweak

This patch makes the receive performance on some systems go from
714MB/s to 941MB/s. It adjusts the watermark of the receive queue
to be lower, thereby avoiding excess hardware flow control. This is
most important on the systems which have little/no additional buffering.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] sky2: beter ram buffer partitioning
Stephen Hemminger [Mon, 4 Dec 2006 23:53:45 +0000 (15:53 -0800)]
[PATCH] sky2: beter ram buffer partitioning

Different chips have different sizes of ram buffers, and some versions have
no ram buffer at all!.  Be more careful about sizing the ram usage because
it maybe a problem if vendor keeps changing sizes.

There is the (unlikely) possibility that some of the errors on some of the
chips have been caused by partitioning not on a 1K boundary.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] sky2: add comments to PCI ids
Stephen Hemminger [Mon, 4 Dec 2006 23:53:36 +0000 (15:53 -0800)]
[PATCH] sky2: add comments to PCI ids

Add comments to sky2 driver to show relationship between PCI id and
hardware.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] sky2: add PCI for 88ec033
Stephen Hemminger [Mon, 4 Dec 2006 23:53:16 +0000 (15:53 -0800)]
[PATCH] sky2: add PCI for 88ec033

Add another new/missing pci id for 88ec033 chip.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] AT91RM9200 Ethernet: Use dev_alloc_skb()
Andrew Victor [Tue, 5 Dec 2006 13:37:02 +0000 (15:37 +0200)]
[PATCH] AT91RM9200 Ethernet: Use dev_alloc_skb()

Use dev_alloc_skb() instead of alloc_skb().

It is also not necessary to adjust skb->len manually since that's
already done by skb_put().

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] AT91RM9200 Ethernet: Add netpoll / netconsole support
Andrew Victor [Tue, 5 Dec 2006 13:33:05 +0000 (15:33 +0200)]
[PATCH] AT91RM9200 Ethernet: Add netpoll / netconsole support

Adds netpoll / netconsole support.

Original patch from Bill Gatliff.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] AT91RM9200 Ethernet: Move check_timer variable and use mod_timer()
Andrew Victor [Tue, 5 Dec 2006 13:21:19 +0000 (15:21 +0200)]
[PATCH] AT91RM9200 Ethernet: Move check_timer variable and use mod_timer()

Move the global 'check_timer' variable into the private data structure.
Also now use mod_timer().

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years ago[PATCH] AT91RM9200 Ethernet: Remove 'at91_dev' and use netdev_priv()
Andrew Victor [Tue, 5 Dec 2006 13:09:16 +0000 (15:09 +0200)]
[PATCH] AT91RM9200 Ethernet: Remove 'at91_dev' and use netdev_priv()

Remove the global 'at91_dev' variable.
Use netdev_priv() instead of casting dev->priv directly.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
15 years agoMerge branch 'master' into upstream
Jeff Garzik [Thu, 7 Dec 2006 09:57:19 +0000 (04:57 -0500)]
Merge branch 'master' into upstream

Conflicts:

drivers/net/netxen/netxen_nic.h
drivers/net/netxen/netxen_nic_main.c

15 years ago[PATCH] A few small additions and corrections to README
Jesper Juhl [Wed, 6 Dec 2006 23:45:58 +0000 (00:45 +0100)]
[PATCH] A few small additions and corrections to README

Here's a small patch which

 - adds a few archs to the current list of supported platforms.
 - adds a few missing slashes at the end of URLs.
 - adds a few references to additional documentation.
 - adds "make config" to the list of possible configuration targets.
 - makes a few other minor changes.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
[ Ben Nizette <ben.nizette@iinet.net.au> points out AVR32 arch too ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] Clean up 'make help' output for documentation targets.
Jesper Juhl [Wed, 6 Dec 2006 23:16:26 +0000 (00:16 +0100)]
[PATCH] Clean up 'make help' output for documentation targets.

Here's a patch that cleans up the "make help" output a bit for the
documentation targets.

Currently the documentation targets are listed completely different than
all the other targets :

  Documentation targets:
    Linux kernel internal documentation in different formats:
    xmldocs (XML DocBook), psdocs (Postscript), pdfdocs (PDF)
    htmldocs (HTML), mandocs (man pages, use installmandocs to install)

with this patch they are more in line with the rest of the output :

  Documentation targets:
   Linux kernel internal documentation in different formats:
    htmldocs        - HTML
    installmandocs  - install man pages generated by mandocs
    mandocs         - man pages
    pdfdocs         - PDF
    psdocs          - Postscript
    xmldocs         - XML DocBook

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Thu, 7 Dec 2006 00:17:37 +0000 (16:17 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Import updates from i386's i8259.c
  [MIPS] *-berr: Header inclusions for DEC bus error handlers
  [MIPS] Compile __do_IRQ() when really needed
  [MIPS] genirq: use name instead of typename
  [MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.
  [MIPS] pte_offset(dir,addr): parenthesis fix

15 years agoMerge branch 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl...
Linus Torvalds [Thu, 7 Dec 2006 00:16:35 +0000 (16:16 -0800)]
Merge branch 'release' of /home/ftp/linux/kernel/git/aegl/linux-2.6

* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix pci.c kernel compilation breakage.

15 years ago[PATCH] ... and then some more work_struct-induced breakage (ibmvscsi)
Al Viro [Wed, 6 Dec 2006 21:15:22 +0000 (21:15 +0000)]
[PATCH] ... and then some more work_struct-induced breakage (ibmvscsi)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] ... and more work_struct-induced breakage (mips)
Al Viro [Wed, 6 Dec 2006 19:50:06 +0000 (19:50 +0000)]
[PATCH] ... and more work_struct-induced breakage (mips)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] More work_struct induced breakage (s390)
Al Viro [Wed, 6 Dec 2006 19:18:20 +0000 (19:18 +0000)]
[PATCH] More work_struct induced breakage (s390)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agox86[-64]:Remove 'volatile' from atomic_t
Linus Torvalds [Wed, 6 Dec 2006 22:42:57 +0000 (14:42 -0800)]
x86[-64]:Remove 'volatile' from atomic_t

Any code that relies on the volatile would be a bug waiting to happen
anyway.

Don't encourage people to think that putting 'volatile' on data
structures somehow fixes problems.  We should always use proper locking
(and other serialization) techniques.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] Remove 'volatile' from spinlock_types
Art Haas [Wed, 6 Dec 2006 20:45:53 +0000 (14:45 -0600)]
[PATCH] Remove 'volatile' from spinlock_types

This is a resubmission of patches originally created by Ingo Molnar.
The link below is the initial (?) posting of the patch.

  http://marc.theaimsgroup.com/?l=linux-kernel&m=115217423929806&w=2

Remove 'volatile' from spinlock_types as it causes GCC to generate bad
code (see link) and locking should be used on kernel data.

Signed-off-by: Art Haas <ahaas@airmail.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[IA64] Fix pci.c kernel compilation breakage.
Peter Chubb [Tue, 5 Dec 2006 01:25:31 +0000 (12:25 +1100)]
[IA64] Fix pci.c kernel compilation breakage.

The recent change to convert the is_enabled flag in the PCI device to an
atomic count broke the IA64 compilation.

As pcibios_disable_device is only ever called if the reference count
is zero, convert the if to a BUG_ON.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
15 years ago[MIPS] Import updates from i386's i8259.c
Atsushi Nemoto [Wed, 6 Dec 2006 17:04:17 +0000 (02:04 +0900)]
[MIPS] Import updates from i386's i8259.c

Import many updates from i386's i8259.c, especially genirq transitions.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] *-berr: Header inclusions for DEC bus error handlers
Maciej W. Rozycki [Wed, 6 Dec 2006 11:50:23 +0000 (11:50 +0000)]
[MIPS] *-berr: Header inclusions for DEC bus error handlers

 A fixup to add missing header inclusions for bus error handlers for
DECstation system after the recent switch to get_irq_regs().

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] Compile __do_IRQ() when really needed
Franck Bui-Huu [Fri, 1 Dec 2006 17:22:27 +0000 (18:22 +0100)]
[MIPS] Compile __do_IRQ() when really needed

__do_IRQ() is needed only by irq handlers that can't use
default handlers defined in kernel/irq/chip.c.

For others platforms there's no need to compile this function
since it won't be used. For those platforms this patch defines
GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for
this purpose.

Futhermore for platforms which do not use __do_IRQ(), end()
method which is part of the 'irq_chip' structure is not used.
This patch simply removes this method in this case.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] genirq: use name instead of typename
Atsushi Nemoto [Tue, 5 Dec 2006 16:20:57 +0000 (01:20 +0900)]
[MIPS] genirq: use name instead of typename

The "typename" field was obsoleted by the "name" field.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.
Atsushi Nemoto [Fri, 1 Dec 2006 15:08:03 +0000 (00:08 +0900)]
[MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[MIPS] pte_offset(dir,addr): parenthesis fix
Franck Bui-Huu [Tue, 5 Dec 2006 09:39:56 +0000 (10:39 +0100)]
[MIPS] pte_offset(dir,addr): parenthesis fix

This patch adds missing parenthesis around 'dir' argument in pte_offset()
macro definition.

It also removes an extra space in the definition of pte_offset_kernel()
macro.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years ago[PATCH] drivers/{char|isdn}: work_struct-induced breakage
Al Viro [Wed, 6 Dec 2006 18:41:45 +0000 (18:41 +0000)]
[PATCH] drivers/{char|isdn}: work_struct-induced breakage

part 1 of fsck-knows-how-many

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] hamradio/dmascc: fix up work_struct-induced breakage
Al Viro [Wed, 6 Dec 2006 18:51:40 +0000 (18:51 +0000)]
[PATCH] hamradio/dmascc: fix up work_struct-induced breakage

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Wed, 6 Dec 2006 16:10:55 +0000 (08:10 -0800)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (43 commits)
  sh: sh775x/titan fixes for irq header changes.
  sh: update r7780rp defconfig.
  sh: compile fixes for header cleanup.
  sh: Fixup pte_mkhuge() build failure.
  sh: set KBUILD_IMAGE to something sensible.
  sh: show held locks in stack trace with lockdep.
  sh: platform_pata support for R7780RP
  sh: stacktrace/lockdep/irqflags tracing support.
  sh: Fixup movli.l/movco.l atomic ops for gcc4.
  sh: dyntick infrastructure.
  sh: Clock framework tidying.
  sh: Turn off IRQs around get_timer_offset() calls.
  sh: Get the PGD right in oops case with 64-bit PTEs.
  sh: Fix store queue bitmap end.
  sh: More flexible + SH7780 earlyprintk SCIF support.
  sh: Fixup various PAGE_SIZE == 4096 assumptions.
  sh: Fixup 4K irq stacks.
  sh: dma-api channel capability extensions.
  sh: Drop name overload in dma-sh.
  sh: Make dma-isa depend on ISA_DMA_API.
  ...

15 years agoMerge git://git.infradead.org/users/dhowells/workq-2.6
Linus Torvalds [Wed, 6 Dec 2006 16:01:37 +0000 (08:01 -0800)]
Merge git://git.infradead.org/users/dhowells/workq-2.6

* git://git.infradead.org/users/dhowells/workq-2.6:
  Actually update the fixed up compile failures.
  WorkQueue: Fix up arch-specific work items where possible
  WorkStruct: make allyesconfig
  WorkStruct: Pass the work_struct pointer instead of context data
  WorkStruct: Merge the pending bit into the wq_data pointer
  WorkStruct: Typedef the work function prototype
  WorkStruct: Separate delayable and non-delayable events.

15 years ago[PATCH] uclinux: fix mmap() of directory for nommu case
Mike Frysinger [Wed, 6 Dec 2006 02:02:59 +0000 (12:02 +1000)]
[PATCH] uclinux: fix mmap() of directory for nommu case

I was playing with blackfin when i hit a neat bug ... doing an open() on a
directory and then passing that fd to mmap() would cause the kernel to hang

after poking into the code a bit more, i found that
mm/nommu.c:validate_mmap_request() checks the length and if it is 0, just
returns the address ... this is in stark contrast to mmu's
mm/mmap.c:do_mmap_pgoff() where it returns -EINVAL for 0 length requests ...
i then noticed that some other parts of the logic is out of date between the
two funcs, so perhaps that's the easy fix ?

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: remove FP conditionals in ucontext struct
Gavin Lambert [Wed, 6 Dec 2006 01:57:53 +0000 (11:57 +1000)]
[PATCH] m68knommu: remove FP conditionals in ucontext struct

The first patch is to the 2.6 kernel include file (for m68knommu), to get
rid of the conditional definitions, otherwise the structures have different
sizes depending on whether there's an FPU or not.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: ColdFire serial driver fixes
Greg Ungerer [Wed, 6 Dec 2006 01:49:34 +0000 (11:49 +1000)]
[PATCH] m68knommu: ColdFire serial driver fixes

Some updates for the old ColdFire serial driver:

 . support 3 and 4 UARTs on some ColdFire parts that have them
 . enable multifunction pins to serial for 527x CPU's
 . support the 5272 UART's fractional baud rate divisor
 . switch driver name to "mcfserial"

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: switch 68360 to using rtc_time
Greg Ungerer [Wed, 6 Dec 2006 01:43:14 +0000 (11:43 +1000)]
[PATCH] m68knommu: switch 68360 to using rtc_time

Adds support for RTCs (through genrtc) for M68KNOMMU.

Board-specific code will have to link the appropriate RTC driver to the
mach_hwclk callback, at minimum.

This patch switches the 68360 code over to using rtc_time.

Signed-off-by: Gavin Lambert <gavinl@compacsort.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms
Greg Ungerer [Wed, 6 Dec 2006 01:36:59 +0000 (11:36 +1000)]
[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms

The 523x timer TRR register is a full 32bits, the older register (on
other ColdFire parts) was only 16 bits.  Use the right type of
__raw_read when accessing it.

Problem found by Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: implement irq_canonicalize()
Greg Ungerer [Wed, 6 Dec 2006 01:36:13 +0000 (11:36 +1000)]
[PATCH] m68knommu: implement irq_canonicalize()

Add a null definition for irq_canonicalize(). It is used in the gerneric
serial subsystem code, can't compile without it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years ago[PATCH] m68knommu: create rtc.h
Greg Ungerer [Wed, 6 Dec 2006 01:35:16 +0000 (11:35 +1000)]
[PATCH] m68knommu: create rtc.h

This adds support for RTCs (through genrtc) for M68KNOMMU.

Board-specific code will have to link the appropriate RTC driver to the
mach_hwclk callback, at minimum.

Signed-off-by: Gavin Lambert <gavinl@compacsort.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
15 years agoActually update the fixed up compile failures.
David Howells [Wed, 6 Dec 2006 15:02:26 +0000 (15:02 +0000)]
Actually update the fixed up compile failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
David Howells [Wed, 6 Dec 2006 15:01:18 +0000 (15:01 +0000)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

Conflicts:

drivers/pcmcia/ds.c

Fix up merge failures with Linus's head and fix new compile failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
15 years agosh: sh775x/titan fixes for irq header changes.
Jamie Lenehan [Wed, 6 Dec 2006 03:05:02 +0000 (12:05 +0900)]
sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: update r7780rp defconfig.
Paul Mundt [Wed, 6 Dec 2006 03:02:01 +0000 (12:02 +0900)]
sh: update r7780rp defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: compile fixes for header cleanup.
Paul Mundt [Wed, 6 Dec 2006 02:24:48 +0000 (11:24 +0900)]
sh: compile fixes for header cleanup.

Since some header inclusion paths were cleaned up, compilation
broke. Add in the headers we need directly to build again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fixup pte_mkhuge() build failure.
Paul Mundt [Wed, 6 Dec 2006 02:20:53 +0000 (11:20 +0900)]
sh: Fixup pte_mkhuge() build failure.

When hugetlbpage support isn't enabled, this can be bogus.
Wrap it back in _PAGE_FLAGS_HARD to avoid changes to the
base PTE when not aiming for larger sizes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: set KBUILD_IMAGE to something sensible.
Paul Mundt [Wed, 6 Dec 2006 02:08:49 +0000 (11:08 +0900)]
sh: set KBUILD_IMAGE to something sensible.

This was missing for sh too, wire it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: show held locks in stack trace with lockdep.
Paul Mundt [Wed, 6 Dec 2006 02:07:51 +0000 (11:07 +0900)]
sh: show held locks in stack trace with lockdep.

Follows the same change as other architectures..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: platform_pata support for R7780RP
Paul Mundt [Wed, 6 Dec 2006 01:43:44 +0000 (10:43 +0900)]
sh: platform_pata support for R7780RP

This adds a platform device for the directly connected
CF interface on R7780RP boards, for use with the
pata_platform libata driver.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: stacktrace/lockdep/irqflags tracing support.
Paul Mundt [Mon, 4 Dec 2006 09:17:28 +0000 (18:17 +0900)]
sh: stacktrace/lockdep/irqflags tracing support.

Wire up all of the essentials for lockdep..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fixup movli.l/movco.l atomic ops for gcc4.
Paul Mundt [Fri, 1 Dec 2006 05:32:54 +0000 (14:32 +0900)]
sh: Fixup movli.l/movco.l atomic ops for gcc4.

gcc4 gets a bit pissy about the outputs:

include/asm/atomic.h: In function 'atomic_add':
include/asm/atomic.h:37: error: invalid lvalue in asm statement
include/asm/atomic.h:30: error: invalid lvalue in asm output 1
...

this ended up being a thinko anyways, so just fix it up.

Verified for proper behaviour with the older toolchains, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: dyntick infrastructure.
Paul Mundt [Fri, 1 Dec 2006 04:23:47 +0000 (13:23 +0900)]
sh: dyntick infrastructure.

This adds basic NO_IDLE_HZ support to the SH timer API so timers
are able to wire it up. Taken from the ARM version, as it fit in
to our API with very few changes needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Clock framework tidying.
Paul Mundt [Fri, 1 Dec 2006 04:15:14 +0000 (13:15 +0900)]
sh: Clock framework tidying.

This syncs up the SH clock framework with the linux/clk.h API,
for which there were only some minor changes required, namely
the clk_get() dev_id and subsequent callsites.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Turn off IRQs around get_timer_offset() calls.
Paul Mundt [Fri, 1 Dec 2006 04:12:05 +0000 (13:12 +0900)]
sh: Turn off IRQs around get_timer_offset() calls.

Since all of the sys_timer sources currently do this on their own
within the ->get_offset() path, it's more sensible to just have
the caller take care of it when grabbing xtime_lock. Incidentally,
this is more in line with what others (ie, ARM) are doing already.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Get the PGD right in oops case with 64-bit PTEs.
Paul Mundt [Fri, 1 Dec 2006 03:14:11 +0000 (12:14 +0900)]
sh: Get the PGD right in oops case with 64-bit PTEs.

Previously this was using a static pgd shift in the reporting
code, simply flip this to PGDIR_SHIFT which does the right
thing depending on varying PTE magnitudes on the SH-X2 MMU.

While we're at it, and since it's been recently added, use
get_TTB() for fetching the TTB, rather than the open coded
instructions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fix store queue bitmap end.
Paul Mundt [Fri, 1 Dec 2006 03:01:43 +0000 (12:01 +0900)]
sh: Fix store queue bitmap end.

The end of the store queue bitmap is miscalculated when searching
for a free range in sq_remap(), missing the PAGE_SHIFT shift that's
done in sq_api_init(). This runs in to workloads where we can scan
beyond the end of the bitmap.

Spotted by Paul Jackson:

http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: More flexible + SH7780 earlyprintk SCIF support.
Paul Mundt [Mon, 27 Nov 2006 03:10:23 +0000 (12:10 +0900)]
sh: More flexible + SH7780 earlyprintk SCIF support.

This makes the early printk support somewhat more flexible,
moving the port definition to a config option, and making the
port initialization configurable for sh-ipl+g users.

At the same time, this allows us to trivially wire up the
SH7780 SCIF0, so that's thrown in too more or less for free.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fixup various PAGE_SIZE == 4096 assumptions.
Paul Mundt [Mon, 27 Nov 2006 03:06:26 +0000 (12:06 +0900)]
sh: Fixup various PAGE_SIZE == 4096 assumptions.

There were a number of places that made evil PAGE_SIZE == 4k
assumptions that ended up breaking when trying to play with
8k and 64k page sizes, this fixes those up.

The most significant change is the way we load THREAD_SIZE,
previously this was done via:

mov #(THREAD_SIZE >> 8), reg
shll8 reg

to avoid a memory access and allow the immediate load. With
a 64k PAGE_SIZE, we're out of range for the immediate load
size without resorting to special instructions available in
later ISAs (movi20s and so on). The "workaround" for this is
to bump up the shift to 10 and insert a shll2, which gives a
bit more flexibility while still being much cheaper than a
memory access.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fixup 4K irq stacks.
Paul Mundt [Fri, 24 Nov 2006 10:46:18 +0000 (19:46 +0900)]
sh: Fixup 4K irq stacks.

There was a clobber issue with the register we were saving
the stack in, so we switch to a register that we handle in
the clobber list properly already.

This also follows the x86 changes for allowing the softirq
checks from hardirq context.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: dma-api channel capability extensions.
Mark Glaisher [Fri, 24 Nov 2006 06:13:52 +0000 (15:13 +0900)]
sh: dma-api channel capability extensions.

This extends the SH DMA API for allowing handling of DMA
channels based off of their respective capabilities.

A couple of functions are added to the existing API,
the core bits are register_chan_caps() for registering
channel capabilities, and request_dma_bycap() for fetching
a channel dynamically based off of a capability set.

Signed-off-by: Mark Glaisher <mark.glaisher@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Drop name overload in dma-sh.
Paul Mundt [Fri, 24 Nov 2006 05:50:05 +0000 (14:50 +0900)]
sh: Drop name overload in dma-sh.

Pass along the dev_id from request_dma() all the way down,
rather than inserting an artificial name relating to the TEI
line that we were doing before.

This makes the line a bit less obvious, but dev_id is the proper
behaviour for this regardless.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Make dma-isa depend on ISA_DMA_API.
Paul Mundt [Fri, 24 Nov 2006 05:48:14 +0000 (14:48 +0900)]
sh: Make dma-isa depend on ISA_DMA_API.

Previously we linked in the ISA DMA wrapper unconditionally.
As there are very few users of this, it's better to make it
conditional.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: dma-sysfs fixes.
Paul Mundt [Fri, 24 Nov 2006 05:43:09 +0000 (14:43 +0900)]
sh: dma-sysfs fixes.

Handle the case where no registered DMACs exist somewhat more
gracefully. While we're at it, check for sysdev_create_file()
failing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fix syscall tracing ordering.
Stuart Menefy [Fri, 24 Nov 2006 04:01:36 +0000 (13:01 +0900)]
sh: Fix syscall tracing ordering.

The implementation of system call tracing in the kernel has a
couple of ordering problems:

 - the validity of the system call number is checked before
   calling out to system call tracing code, and should be
   done after

 - the system call number used when tracing is the one the
   system call was invoked with, while the system call tracing
   code can legitimatly change the call number (for example
   strace permutes fork into clone)

This patch fixes both of these problems, and also reoders the
code slightly to make the direct path through the code the
common case.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: KSTK_EIP/KSTK_ESP consistency.
Stuart Menefy [Fri, 24 Nov 2006 03:53:02 +0000 (12:53 +0900)]
sh: KSTK_EIP/KSTK_ESP consistency.

Two of the fields in /proc/[number]/stat are documented in
proc(5) as:

      kstkesp %lu
     The current value of esp (stack pointer), as
     found in the kernel stack page for the process.

      kstkeip %lu
     The current EIP (instruction pointer).

The SH currently prints the the last SP and PC of the process
inside the kernel, while most other archs use the last user
space values.

This patch modifes the SH to display the user space values.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: TLB miss fast-path optimizations.
Stuart Menefy [Fri, 24 Nov 2006 02:42:24 +0000 (11:42 +0900)]
sh: TLB miss fast-path optimizations.

Handle simple TLB miss faults which can be resolved completely
from the page table in assembler.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: R7780RP push-switch support.
Paul Mundt [Fri, 24 Nov 2006 02:24:39 +0000 (11:24 +0900)]
sh: R7780RP push-switch support.

This adds simple push-switch support for the RDBRP-1/RDBREVRP-1 debug
boards found on the R7780RP-1.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: generic push-switch framework.
Paul Mundt [Fri, 24 Nov 2006 02:22:57 +0000 (11:22 +0900)]
sh: generic push-switch framework.

This adds support for a generic push switch framework. Adaptable for
various switches, including GPIO switches and the push switches commonly
found on Renesas debug boards.

This allows switch states to be trivially reported through sysfs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: pmd rework.
Stuart Menefy [Tue, 21 Nov 2006 06:38:05 +0000 (15:38 +0900)]
sh: pmd rework.

Remove extra bits from the pmd structure and store a kernel logical
address rather than a physical address. This allows it to be directly
dereferenced. Another piece of wierdness inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Use MMU.TTB register as pointer to current pgd.
Stuart Menefy [Tue, 21 Nov 2006 04:53:44 +0000 (13:53 +0900)]
sh: Use MMU.TTB register as pointer to current pgd.

Add TTB accessor functions and give it a sensible default
value. We will use this later for optimizing the fault
path.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Set up correct siginfo structures for page faults.
Stuart Menefy [Tue, 21 Nov 2006 04:34:04 +0000 (13:34 +0900)]
sh: Set up correct siginfo structures for page faults.

Remove the previous saving of fault codes into the thread_struct
as they are never used, and appeared to be inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: gcc4 support.
Stuart Menefy [Tue, 21 Nov 2006 02:16:57 +0000 (11:16 +0900)]
sh: gcc4 support.

This fixes up the kernel for gcc4. The existing exception handlers
needed some wrapping for pt_regs access, acessing the registers
via a RELOC_HIDE() pointer.

The strcpy() issues popped up here too, so add -ffreestanding and
kill off the symbol export.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Explicit endian selection support.
Paul Mundt [Tue, 21 Nov 2006 02:12:19 +0000 (11:12 +0900)]
sh: Explicit endian selection support.

Previously big endian was simply assumed if little endian was
not set, which led to some cflags ordering issues. There's not
much point to not having a big endian option, so shove one in
a choice and wire it up in the Makefile.

This lets us clean up some of the cflags ordering while we're
at it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: p3map_sem sem2mutex conversion.
Paul Mundt [Tue, 21 Nov 2006 02:09:41 +0000 (11:09 +0900)]
sh: p3map_sem sem2mutex conversion.

Simple sem2mutex conversion for the p3map semaphores.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Preliminary support for SH-X2 MMU.
Paul Mundt [Mon, 20 Nov 2006 05:30:26 +0000 (14:30 +0900)]
sh: Preliminary support for SH-X2 MMU.

This adds some preliminary support for the SH-X2 MMU, used by
newer SH-4A parts (particularly SH7785).

This MMU implements a 'compat' mode with SH-X MMUs and an
'extended' mode for SH-X2 extended features. Extended features
include additional page sizes (8kB, 4MB, 64MB), as well as the
addition of page execute permissions.

The extended mode attributes are placed in a second data array,
which requires us to switch to 64-bit PTEs when in X2 mode.

With the addition of the exec perms, we also overhaul the mmap
prots somewhat, now that it's possible to handle them more
intelligently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Hook SH7785 in to the build system.
Paul Mundt [Mon, 20 Nov 2006 05:14:29 +0000 (14:14 +0900)]
sh: Hook SH7785 in to the build system.

Simple 7785 placeholders to start hooking up other bits of code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Drop CPU subtype IRQ headers.
Paul Mundt [Mon, 20 Nov 2006 04:55:34 +0000 (13:55 +0900)]
sh: Drop CPU subtype IRQ headers.

This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Configurable timer IRQ.
Paul Mundt [Mon, 20 Nov 2006 02:18:30 +0000 (11:18 +0900)]
sh: Configurable timer IRQ.

All of the various CPU subtypes currently hardcode TIMER_IRQ,
switch this to a config option in the few places we need this.

This allows further removal of hardcoded IRQ headers..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Fixup entry-common path breakage for SH-3.
Paul Mundt [Tue, 7 Nov 2006 10:29:23 +0000 (10:29 +0000)]
sh: Fixup entry-common path breakage for SH-3.

The nommu patches broke the path for the common bits, get it building
for the SH-3/4 case again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: SE7206 build fixes.
Paul Mundt [Sun, 5 Nov 2006 07:48:42 +0000 (16:48 +0900)]
sh: SE7206 build fixes.

A number of API changes happened underneath the 7206 patches, update
for everything that broke.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Add support for Solution Engine 7206 and 7619 boards.
Yoshinori Sato [Sun, 5 Nov 2006 07:21:09 +0000 (16:21 +0900)]
sh: Add support for Solution Engine 7206 and 7619 boards.

This adds support for the Solution Engine 7206 and 7619.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Add SH-2A platform headers.
Yoshinori Sato [Sun, 5 Nov 2006 07:18:08 +0000 (16:18 +0900)]
sh: Add SH-2A platform headers.

Mostly SH-2 wrappers..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Exception vector rework and SH-2/SH-2A support.
Yoshinori Sato [Sun, 5 Nov 2006 07:15:19 +0000 (16:15 +0900)]
sh: Exception vector rework and SH-2/SH-2A support.

This splits out common bits from the existing exception handler for
use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A
exceptions.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Wire up division and address error exceptions on SH-2A.
Yoshinori Sato [Sun, 5 Nov 2006 06:58:47 +0000 (15:58 +0900)]
sh: Wire up division and address error exceptions on SH-2A.

SH-2A has special division hardware as opposed to a full-fledged FPU,
wire up the exception handlers for this.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agosh: Add support for SH7206 and SH7619 CPU subtypes.
Yoshinori Sato [Sun, 5 Nov 2006 06:40:13 +0000 (15:40 +0900)]
sh: Add support for SH7206 and SH7619 CPU subtypes.

This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years ago[PATCH] ipw2200: Fix debug output endian issue
Zhu Yi [Tue, 5 Dec 2006 06:41:40 +0000 (14:41 +0800)]
[PATCH] ipw2200: Fix debug output endian issue

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] ipw2200: Fix a typo
Zhu Yi [Tue, 5 Dec 2006 06:41:32 +0000 (14:41 +0800)]
[PATCH] ipw2200: Fix a typo

Signed-off-by: Pascal Terjan <pterjan@gmail.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] ipw2200: Update version stamp to 1.2.0
Zhu Yi [Tue, 5 Dec 2006 06:41:24 +0000 (14:41 +0800)]
[PATCH] ipw2200: Update version stamp to 1.2.0

Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] ipw2200: Add IEEE80211_RADIOTAP_TSFT for promiscuous mode
Zhu Yi [Tue, 5 Dec 2006 06:42:14 +0000 (14:42 +0800)]
[PATCH] ipw2200: Add IEEE80211_RADIOTAP_TSFT for promiscuous mode

The ipw2200 BSS firmware passes on the TSF information within ipw_rx_frame,
but monitor firmware doesn't. I add back the IEEE80211_RADIOTAP_TSFT flags
so that we can get the MAC timestamp if we use the rtap interface. We will
see the MAC timestamp equals to zero if we capture the packets with a
monitor mode interface. But this is the expected behaviour.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] softmac: fix unbalanced mutex_lock/unlock in ieee80211softmac_wx_set_mlme
Maxime Austruy [Sun, 3 Dec 2006 16:40:01 +0000 (10:40 -0600)]
[PATCH] softmac: fix unbalanced mutex_lock/unlock in ieee80211softmac_wx_set_mlme

Routine ieee80211softmac_wx_set_mlme has one return that fails
to release a mutex acquired at entry.

Signed-off-by: Maxime Austruy <maxime@tralhalla.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] softmac: Fixed handling of deassociation from AP
Ulrich Kunitz [Sun, 3 Dec 2006 15:32:00 +0000 (16:32 +0100)]
[PATCH] softmac: Fixed handling of deassociation from AP

In 2.6.19 a deauthentication from the AP doesn't start a
reassociation by the softmac code. It appears that
mac->associnfo.associating must be set and the
ieee80211softmac_assoc_work function must be scheduled. This patch
fixes that.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] ipw2200: replace kmalloc+memset with kcalloc
Yan Burman [Sat, 2 Dec 2006 11:38:14 +0000 (13:38 +0200)]
[PATCH] ipw2200: replace kmalloc+memset with kcalloc

Replace kmalloc+memset with kcalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] prism54: replace kmalloc+memset with kzalloc
Yan Burman [Sat, 2 Dec 2006 11:35:20 +0000 (13:35 +0200)]
[PATCH] prism54: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] hostap: replace kmalloc+memset with kzalloc
Yan Burman [Sat, 2 Dec 2006 11:33:40 +0000 (13:33 +0200)]
[PATCH] hostap: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] zd1211rw: Support for multicast addresses
Ulrich Kunitz [Fri, 1 Dec 2006 00:58:07 +0000 (00:58 +0000)]
[PATCH] zd1211rw: Support for multicast addresses

Support for multicast adresses is implemented by supporting the
set_multicast_list() function of the network device. Address
filtering is supported by a group hash table in the device.

This is based on earlier work by Benoit Papillaut. Fixes multicast packet
reception and ipv6 connectivity:
http://bugzilla.kernel.org/show_bug.cgi?id=7424
http://bugzilla.kernel.org/show_bug.cgi?id=7425

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] zd1211rw: Fill enc_capa in GIWRANGE handler
Daniel Drake [Fri, 1 Dec 2006 00:57:11 +0000 (00:57 +0000)]
[PATCH] zd1211rw: Fill enc_capa in GIWRANGE handler

This is needed for NetworkManager users to connect to WPA networks.
Pointed out by Matthew Campbell.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years ago[PATCH] zd1211rw: zd_mac_rx isn't always called in IRQ context
Daniel Drake [Fri, 1 Dec 2006 00:56:50 +0000 (00:56 +0000)]
[PATCH] zd1211rw: zd_mac_rx isn't always called in IRQ context

e.g.

usb 1-7: rx_urb_complete() *** first fragment ***
usb 1-7: rx_urb_complete() *** second fragment ***
drivers/net/wireless/zd1211rw/zd_mac.c:1063 ASSERT
(((current_thread_info()->preempt_count) & (((1UL << (12))-1) << ((0 +
8) + 8)))) VIOLATED!
 [<f0299448>] zd_mac_rx+0x3e7/0x47a [zd1211rw]
 [<f029badc>] rx_urb_complete+0x22d/0x24a [zd1211rw]
 [<b028a22f>] urb_destroy+0x0/0x5
 [<b01f0930>] kref_put+0x65/0x72
 [<b0288cdf>] usb_hcd_giveback_urb+0x28/0x57
 [<b02950c4>] qh_completions+0x296/0x2f6
 [<b0294b21>] ehci_urb_done+0x70/0x7a
 [<b0294ea1>] qh_completions+0x73/0x2f6
 [<b02951bc>] ehci_work+0x98/0x538

Remove the bogus assertion, and use dev_kfree_skb_any as pointed out by
Ulrich Kunitz.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Wed, 6 Dec 2006 00:09:46 +0000 (16:09 -0800)]
Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits)
  [SCSI] aic79xx: Add ASC-29320LPE ids to driver
  [SCSI] stex: version update
  [SCSI] stex: change wait loop code
  [SCSI] stex: add new device type support
  [SCSI] stex: update device id info
  [SCSI] stex: adjust default queue length
  [SCSI] stex: add value check in hard reset routine
  [SCSI] stex: fix controller_info command handling
  [SCSI] stex: fix biosparam calculation
  [SCSI] megaraid: fix MMIO casts
  [SCSI] tgt: fix undefined flush_dcache_page() problem
  [SCSI] libsas: better error handling in sas_expander.c
  [SCSI] lpfc 8.1.11 : Change version number to 8.1.11
  [SCSI] lpfc 8.1.11 : Misc Fixes
  [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable
  [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id
  [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support
  [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging
  [SCSI] lpfc 8.1.11 : Fix Memory leaks
  [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support
  ...

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Tue, 5 Dec 2006 23:52:06 +0000 (15:52 -0800)]
Merge /pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: fix m32r_cfc.c compilation
  [PATCH] pcmcia: ds.c debug enhancements
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation
  [PATCH] pcmcia: remove prod_id indirection
  [PATCH] pcmcia: remove manf_id and card_id indirection
  [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies
  [PATCH] pcmcia: allow for four multifunction subdevices
  [PATCH] pcmcia: handle __copy_from_user() return value in ioctl
  [PATCH] pcmcia: multifunction card handling fixes
  [PATCH] pcmcia: allow shared IRQs on pd6729 sockets
  [PATCH] pcmcia: start over after CIS override
  [PATCH] cm4000_cs: fix return value check
  [PATCH] pcmcia: yet another IDE ID
  [PATCH] pcmcia: Add an id to ide-cs.c