sfrench/cifs-2.6.git
4 years agodrm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels
Jonathan Liu [Fri, 7 Sep 2018 04:19:45 +0000 (12:19 +0800)]
drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

The hardware supports dithering on TCON channel 0 which is used for LCD
panels.

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
4 years agodrm/sun4i: tcon: Rename Dithering related register macros
Chen-Yu Tsai [Fri, 7 Sep 2018 04:19:44 +0000 (12:19 +0800)]
drm/sun4i: tcon: Rename Dithering related register macros

Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".

Rename the macros to reflect this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-3-wens@csie.org
4 years agodrm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
Chen-Yu Tsai [Fri, 7 Sep 2018 04:19:43 +0000 (12:19 +0800)]
drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu

sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.

The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.

Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-2-wens@csie.org
4 years agodrm: expand replace_fence to support timeline point v2
Chunming Zhou [Thu, 30 Aug 2018 06:48:30 +0000 (14:48 +0800)]
drm: expand replace_fence to support timeline point v2

we can place a fence to a timeline point after expanded.
v2: change func parameter order

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246543/
4 years agodrm: expand drm_syncobj_find_fence to support timeline point v2
Chunming Zhou [Thu, 30 Aug 2018 06:48:29 +0000 (14:48 +0800)]
drm: expand drm_syncobj_find_fence to support timeline point v2

we can fetch timeline point fence after expanded.
v2: The parameter fence is the result of the function and should come last.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246541/
4 years agodrm: rename null fence to stub fence in syncobj v2
Chunming Zhou [Thu, 30 Aug 2018 06:48:28 +0000 (14:48 +0800)]
drm: rename null fence to stub fence in syncobj v2

moved to front of file.
stub fence will be used by timeline syncobj as well.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246539/
4 years agodrm: fix syncobj null_fence_enable_signaling
Chunming Zhou [Thu, 30 Aug 2018 06:48:27 +0000 (14:48 +0800)]
drm: fix syncobj null_fence_enable_signaling

That is certainly totally nonsense. dma_fence_enable_sw_signaling()
is the function who is calling this callback.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246535/
4 years agodrm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctl
Chris Wilson [Wed, 5 Sep 2018 15:31:16 +0000 (16:31 +0100)]
drm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctl

Since this is handling user provided bpp and depth, we need to sanity
check and propagate the EINVAL back rather than assume what the insane
client intended and fill the logs with DRM_ERROR.

v2: Check both bpp and depth match the builtin pixel format, and
introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future
fourcc.

v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8}

Testcase: igt/kms_addfb_basic/legacy-format
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905153116.28924-1-chris@chris-wilson.co.uk
4 years agodrm: fix drm_mode_addfb() on big endian machines.
Gerd Hoffmann [Wed, 5 Sep 2018 06:04:43 +0000 (08:04 +0200)]
drm: fix drm_mode_addfb() on big endian machines.

Userspace on big endian machhines typically expects the ADDFB ioctl
returns a big endian framebuffer.  drm_mode_addfb() will call
drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_*
values though, which is wrong.  This patch fixes that.

Drivers (both kernel and xorg) have quirks in place to deal with the
broken drm_mode_addfb() behavior.  Because of this we can't just change
drm_mode_addfb() behavior for everybody without breaking things.  Add
the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers
can opt-in.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
4 years agodrm: do not mask out DRM_FORMAT_BIG_ENDIAN
Gerd Hoffmann [Wed, 5 Sep 2018 06:04:42 +0000 (08:04 +0200)]
drm: do not mask out DRM_FORMAT_BIG_ENDIAN

framebuffer_check() expects that drm_get_format_info() will not fail if
the __drm_format_info() call was successful.  That'll work only in case
both are called with the same pixel_format value, so masking out the
DRM_FORMAT_BIG_ENDIAN flag isn't a good idea.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-4-kraxel@redhat.com
4 years agodrm: byteorder: add DRM_FORMAT_HOST_*
Gerd Hoffmann [Wed, 5 Sep 2018 06:04:41 +0000 (08:04 +0200)]
drm: byteorder: add DRM_FORMAT_HOST_*

Add fourcc variants in host byte order.  With these at hand we don't
need #ifdefs in drivers which support framebuffers in cpu endianess.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-3-kraxel@redhat.com
4 years agodrm: replace DRIVER_PREFER_XBGR_30BPP driver flag with mode_config quirk
Gerd Hoffmann [Wed, 5 Sep 2018 06:04:40 +0000 (08:04 +0200)]
drm: replace DRIVER_PREFER_XBGR_30BPP driver flag with mode_config quirk

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-2-kraxel@redhat.com
4 years agodrm/rockchip: rgb: add stub functions when rgb encoder is disabled
Heiko Stuebner [Wed, 5 Sep 2018 19:13:02 +0000 (21:13 +0200)]
drm/rockchip: rgb: add stub functions when rgb encoder is disabled

The newly added internal rgb encoder for Rockchip vops is missing
stubs for the case that the rgb output part is not enabled in the
kernel config. So add these.

Fixes: 1f0f01515172 (drm/rockchip: Add support for Rockchip Soc RGB output interface)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul fixed up checkpatch nits]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905191302.26023-1-heiko@sntech.de
4 years agodrm/vkms: Fix race condition around accessing frame number
Haneen Mohammed [Mon, 3 Sep 2018 21:18:17 +0000 (00:18 +0300)]
drm/vkms: Fix race condition around accessing frame number

crtc_state is accessed by both vblank_handle() and the ordered
work_struct handle vkms_crc_work_handle() to retrieve and or update
the frame number for computed CRC.

Since work_struct can fail, add frame_end to account for missing frame
numbers.

Use (frame_[start/end]) for synchronization between hrtimer callback
and ordered work_struct handle.

This patch passes the following subtests from igt kms_pipe_crc_basic test:
bad-source, read-crc-pipe-A, read-crc-pipe-A-frame-sequence,
nonblocking-crc-pipe-A, nonblocking-crc-pipe-A-frame-sequence

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903211743.GA2773@haneenDRM
4 years agodrm/rockchip: vop: add rk3188 vop definitions
Heiko Stuebner [Thu, 30 Aug 2018 11:09:37 +0000 (13:09 +0200)]
drm/rockchip: vop: add rk3188 vop definitions

The rk3188 has 2 vops not using iommus which only output directly
to a rgb interface per vop. So all other output modes like hdmi
are provided by external brige chips.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830110937.1739-1-heiko@sntech.de
4 years agodrm/rockchip: vop: Add directly output rgb feature for px30
Sandy Huang [Thu, 30 Aug 2018 21:12:07 +0000 (23:12 +0200)]
drm/rockchip: vop: Add directly output rgb feature for px30

Add this feature bit indicate px30 vop can directly output
parallel or serial rgb data.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-4-heiko@sntech.de
4 years agodrm/rockchip: Add support for Rockchip Soc RGB output interface
Sandy Huang [Thu, 30 Aug 2018 21:12:06 +0000 (23:12 +0200)]
drm/rockchip: Add support for Rockchip Soc RGB output interface

Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.

So add a feature-bit for vops to mark the ability for these direct
outputs and add an internal encoder in that case, that can attach to
bridge chipsor panels.

Changes in v7:
    1. forget to delete rockchip_rgb_driver and delete it.
Changes in v6:
    1. Update according to Heiko Stuebner' implemention, rgb output is
       part of vop's feature, should not register as a independent
       driver.
Changes in v5:
    1. add SPDX-License-Identifier tag
Changes in v4:
    1. add support px30;
Changes in v3:
    1. update for rgb-mode move to panel node.
Changes in v2:
    1. add error log when probe failed;
    2. update name_to_output_mode() according to sean's suggest;
    3. Fix uninitialized use of ret.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-3-heiko@sntech.de
4 years agodrm/rockchip: add function to check if endpoint is a subdriver
Heiko Stuebner [Thu, 30 Aug 2018 21:12:05 +0000 (23:12 +0200)]
drm/rockchip: add function to check if endpoint is a subdriver

To be able to have both internal subdrivers and external bridge
drivers as output endpoints of vops, add a function to be able
to distinguish these.

changes in v8:
- improved function documentation
- better error handling
- put calls for node and pdev references
changes in v6:
- added function to check subdriver vs. bridge

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-2-heiko@sntech.de
4 years agodrm/sun4i: Add support for HDMI voltage regulator
Jernej Skrabec [Tue, 4 Sep 2018 04:40:52 +0000 (12:40 +0800)]
drm/sun4i: Add support for HDMI voltage regulator

Some boards have HDMI VCC pin connected to voltage regulator which may
not be turned on by default.

Add support for such boards by adding voltage regulator handling code to
HDMI driver.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Icenowy: change supply name to "hvcc"]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-11-icenowy@aosc.io
4 years agodt-bindings: sun4i-drm: add HDMI VCC supply property for sun8i-dw-hdmi
Icenowy Zheng [Tue, 4 Sep 2018 04:40:51 +0000 (12:40 +0800)]
dt-bindings: sun4i-drm: add HDMI VCC supply property for sun8i-dw-hdmi

Allwiner SoCs with DesignWare HDMI controller all come with a "HVCC"
pin, which is the VCC of HDMI part.

Add a supply property to specify HVCC's regulator in the device tree.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-10-icenowy@aosc.io
4 years agodt-bindings: display: Add compatible for A64 HDMI
Jagan Teki [Tue, 4 Sep 2018 04:40:48 +0000 (12:40 +0800)]
dt-bindings: display: Add compatible for A64 HDMI

The HDMI controller on Allwinner A64 is similar on the one on
H3/H5/A83T (although the PHY is different with A83T).

Add A64 compatible and append A83T compatible as fallback.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[Icenowy: refactor commit log]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-7-icenowy@aosc.io
4 years agodrm/sun4i: Add support for A64 display engine
Jagan Teki [Tue, 4 Sep 2018 04:40:47 +0000 (12:40 +0800)]
drm/sun4i: Add support for A64 display engine

Display Engine(DE2) in Allwinner A64 has two mixers and tcons.

The routing for mixer0 is through tcon0 and connected to
LVDS/RGB/MIPI-DSI controller.

The routing for mixer1 is through tcon1 and connected to HDMI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-6-icenowy@aosc.io
4 years agodrm/sun4i: Add support for A64 mixers
Jagan Teki [Tue, 4 Sep 2018 04:40:46 +0000 (12:40 +0800)]
drm/sun4i: Add support for A64 mixers

Mixers in Allwinner have similar capabilities as others SoCs with DE2.

Add support for them.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: Add mixer1]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-5-icenowy@aosc.io
4 years agodt-bindings: display: Add compatible for A64 DE2 display pipeline
Jagan Teki [Tue, 4 Sep 2018 04:40:45 +0000 (12:40 +0800)]
dt-bindings: display: Add compatible for A64 DE2 display pipeline

Allwinner A64 has a DE2 display pipeline. The TCONs are similar to the
ones in A83T, but the mixers are new (similar to the later R40 SoC).

This patch adds dt-binding documentation for A64 DE2 display pipeline.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[Icenowy: Refactor and also cover TCON1]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-4-icenowy@aosc.io
4 years agodma-buf/udmabuf: Fix NULL pointer dereference in udmabuf_create
Gustavo A. R. Silva [Tue, 4 Sep 2018 19:07:49 +0000 (14:07 -0500)]
dma-buf/udmabuf: Fix NULL pointer dereference in udmabuf_create

There is a potential execution path in which pointer memfd is NULL when
passed as argument to fput(), hence there is a NULL pointer dereference
in fput().

Fix this by null checking *memfd* before calling fput().

Addresses-Coverity-ID: 1473174 ("Explicit null dereferenced")
Fixes: fbb0de795078 ("Add udmabuf misc device")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904190749.GA9308@embeddedor.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/virtio: add iommu support.
Gerd Hoffmann [Wed, 29 Aug 2018 12:20:26 +0000 (14:20 +0200)]
drm/virtio: add iommu support.

Use the dma mapping api and properly add iommu mappings for
objects, unless virtio is in iommu quirk mode.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180829122026.27012-3-kraxel@redhat.com
4 years agodrm/virtio: add virtio_gpu_object_detach() function
Gerd Hoffmann [Wed, 29 Aug 2018 12:20:25 +0000 (14:20 +0200)]
drm/virtio: add virtio_gpu_object_detach() function

The new function balances virtio_gpu_object_attach().

Also make virtio_gpu_cmd_resource_inval_backing() static and switch
call sites to the new virtio_gpu_object_attach() function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180829122026.27012-2-kraxel@redhat.com
4 years agodrm/virtio: track virtual output state
Gerd Hoffmann [Mon, 13 Aug 2018 15:28:55 +0000 (17:28 +0200)]
drm/virtio: track virtual output state

Track whenever an virtual output (crtc) is enabled or disabled.

On atomic updates check for both framebuffer being present and crtc
being enabled to figure whenever the output is active or not.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180813152855.12863-1-kraxel@redhat.com
4 years agoqxl: fix null-pointer crash during suspend
Peter Wu [Tue, 4 Sep 2018 20:27:47 +0000 (22:27 +0200)]
qxl: fix null-pointer crash during suspend

"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.

Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:

    spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
    spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0

This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm: Remove "protection" around drm_vma_offset_manager_destroy()
Chris Wilson [Mon, 3 Sep 2018 09:31:55 +0000 (10:31 +0100)]
drm: Remove "protection" around drm_vma_offset_manager_destroy()

Using a spinlock to serialize the destroy function, within the destroy
function itself does not prevent the buggy driver from shooting
themselves in the foot - either way they still have a use-after-free
issue.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903093155.3825-1-chris@chris-wilson.co.uk
4 years agodrm: Suppress user controlled spam for invalid drm_wait_vblank_ioctl
Chris Wilson [Tue, 4 Sep 2018 11:57:19 +0000 (12:57 +0100)]
drm: Suppress user controlled spam for invalid drm_wait_vblank_ioctl

The ioctl arguments are under control of the user and as such we should
resist any temptation to flood the kernel logs with their errors.
Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into
hearing of their own mistakes. (One day we will have a small ringbuffer
attached to the task, so that the concerned process can inspect its own
debug info for EINVAL without them being hitting syslog at all.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904115719.24525-1-chris@chris-wilson.co.uk
4 years agoDocument/gpu: Use new vm_fault_t type
Souptick Joarder [Tue, 4 Sep 2018 04:15:05 +0000 (09:45 +0530)]
Document/gpu: Use new vm_fault_t type

We have introduce new return type vm_fault_t for
fault handler. Update the document for the same.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904041505.GA2712@jordon-HP-15-Notebook-PC
4 years agodrm/tegra: kick out simplefb
Michał Mirosław [Sat, 1 Sep 2018 14:08:51 +0000 (16:08 +0200)]
drm/tegra: kick out simplefb

Kick out firmware fb when loading Tegra driver.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b5c3972e5774d0d1f8887054a993bbc54e9dbe2a.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/sun4i: use simpler remove_conflicting_framebuffers(NULL)
Michał Mirosław [Sat, 1 Sep 2018 14:08:51 +0000 (16:08 +0200)]
drm/sun4i: use simpler remove_conflicting_framebuffers(NULL)

Use remove_conflicting_framebuffers(NULL) instead of duplicating it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7d6d5bc4deac322b1351533c989cb3583e91be49.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/vc4: use simpler remove_conflicting_framebuffers(NULL)
Michał Mirosław [Sat, 1 Sep 2018 14:08:50 +0000 (16:08 +0200)]
drm/vc4: use simpler remove_conflicting_framebuffers(NULL)

Use remove_conflicting_framebuffers(NULL) instead of open-coding it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/be7e6396e6e7159695a5bccc109c6ab49a51e0d8.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/virtio: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:49 +0000 (16:08 +0200)]
drm/virtio: use simpler remove_conflicting_pci_framebuffers()

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/25f89daf6217da98a52d41c4ad62a78272bb0cf6.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/mgag200: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:48 +0000 (16:08 +0200)]
drm/mgag200: use simpler remove_conflicting_pci_framebuffers()

Remove duplicated call, while at it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/90fc954f90de44157d6cc1c782147db6252c71e4.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/radeon: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:48 +0000 (16:08 +0200)]
drm/radeon: use simpler remove_conflicting_pci_framebuffers()

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b61a2e458b6a2964039693d724cc75b4fcfb3ddb.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/bochs: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:46 +0000 (16:08 +0200)]
drm/bochs: use simpler remove_conflicting_pci_framebuffers()

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b5fce8eba7472e5ba8e18c2624938be6c5aa6ebb.1535810304.git.mirq-linux@rere.qmqm.pl
Link: https://patchwork.freedesktop.org/patch/msgid/a9a4691b6eea789664edd6b85a85b7990953a222.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/cirrus: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:47 +0000 (16:08 +0200)]
drm/cirrus: use simpler remove_conflicting_pci_framebuffers()

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a9a4691b6eea789664edd6b85a85b7990953a222.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agodrm/amdgpu: use simpler remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:46 +0000 (16:08 +0200)]
drm/amdgpu: use simpler remove_conflicting_pci_framebuffers()

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/fe59ab587ef4ef799b525fcc03d87800c5dc26d9.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agofbdev: add remove_conflicting_pci_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:45 +0000 (16:08 +0200)]
fbdev: add remove_conflicting_pci_framebuffers()

Almost all PCI drivers using remove_conflicting_framebuffers() wrap it
with the same code.

v2: add kerneldoc for DRM helper
v3: propagate remove_conflicting_framebuffers() return value
  + move kerneldoc to where function is implemented

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7db1c278276de420eb45a1b71d06b5eb6bbd49ef.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agofbdev: add kerneldoc do remove_conflicting_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:45 +0000 (16:08 +0200)]
fbdev: add kerneldoc do remove_conflicting_framebuffers()

Document remove_conflicting_framebuffers() behaviour.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/283fef19815b991700b56119d8d5874a2a8da44e.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agofbdev: allow apertures == NULL in remove_conflicting_framebuffers()
Michał Mirosław [Sat, 1 Sep 2018 14:08:44 +0000 (16:08 +0200)]
fbdev: allow apertures == NULL in remove_conflicting_framebuffers()

Interpret (otherwise-invalid) NULL apertures argument to mean all-memory
range. This will allow to remove several duplicates of this code
from drivers in following patches.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b5fed539fe569035139c8594c23effd8c39f12ca.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agofbdev: show fbdev number for debugging
Michał Mirosław [Sat, 1 Sep 2018 14:08:44 +0000 (16:08 +0200)]
fbdev: show fbdev number for debugging

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef584ecd8642e8b1a04f28d6d9c1864b5aa507bb.1535810304.git.mirq-linux@rere.qmqm.pl
4 years agoAdd udmabuf misc device
Gerd Hoffmann [Mon, 27 Aug 2018 09:34:44 +0000 (11:34 +0200)]
Add udmabuf misc device

A driver to let userspace turn memfd regions into dma-bufs.

Use case:  Allows qemu create dmabufs for the vga framebuffer or
virtio-gpu ressources.  Then they can be passed around to display
those guest things on the host.  To spice client for classic full
framebuffer display, and hopefully some day to wayland server for
seamless guest window display.

qemu test branch:
  https://git.kraxel.org/cgit/qemu/log/?h=sirius/udmabuf

Cc: David Airlie <airlied@linux.ie>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180827093444.23623-1-kraxel@redhat.com
4 years agodrm: Describe pixel_blend_mode in drm_plane_state
Sean Paul [Fri, 31 Aug 2018 15:09:25 +0000 (11:09 -0400)]
drm: Describe pixel_blend_mode in drm_plane_state

Adds docs for pixel_blend_mode in drm_plane_state. Fixes the warning
found by kbuild test robot:

htmldocs: include/drm/drm_plane.h:189: warning: Function parameter or member 'pixel_blend_mode' not described in 'drm_plane_state'

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lowry Li <lowry.li@arm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831150934.202332-1-sean@poorly.run
4 years agodrm/amdgpu: add DisplayPort CEC-Tunneling-over-AUX support
Hans Verkuil [Mon, 27 Aug 2018 08:08:18 +0000 (10:08 +0200)]
drm/amdgpu: add DisplayPort CEC-Tunneling-over-AUX support

Add DisplayPort CEC-Tunneling-over-AUX support to amdgpu.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de9586bb-151e-bae9-b8e3-14db107a60df@xs4all.nl
4 years agodrm/nouveau: add DisplayPort CEC-Tunneling-over-AUX support
Hans Verkuil [Mon, 27 Aug 2018 08:06:51 +0000 (10:06 +0200)]
drm/nouveau: add DisplayPort CEC-Tunneling-over-AUX support

Add DisplayPort CEC-Tunneling-over-AUX support to nouveau.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c0b907d-0bf2-7b80-b4b6-cbde78b03f0d@xs4all.nl
4 years agodrm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()
Hans Verkuil [Mon, 27 Aug 2018 08:07:42 +0000 (10:07 +0200)]
drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()

When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.

This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
4 years agodrm_dp_cec: add note about good MegaChips 2900 CEC support
Hans Verkuil [Mon, 27 Aug 2018 07:58:17 +0000 (09:58 +0200)]
drm_dp_cec: add note about good MegaChips 2900 CEC support

A big problem with DP CEC-Tunneling-over-AUX is that it is tricky
to find adapters with a chipset that supports this AND where the
manufacturer actually connected the HDMI CEC line to the chipset.

Add a mention of the MegaChips 2900 chipset which seems to support
this feature well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827075820.41109-3-hverkuil@xs4all.nl
4 years agodrm_dp_cec: check that aux has a transfer function
Hans Verkuil [Mon, 27 Aug 2018 07:58:16 +0000 (09:58 +0200)]
drm_dp_cec: check that aux has a transfer function

If aux->transfer == NULL, then just return without doing
anything. In that case the function is likely called for
a non-(e)DP connector.

This never happened for the i915 driver, but the nouveau and amdgpu
drivers need this check.

The alternative would be to add this check in those drivers before
every drm_dp_cec call, but it makes sense to check it in the
drm_dp_cec functions to prevent a kernel oops.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827075820.41109-2-hverkuil@xs4all.nl
4 years agodrm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()
Dan Carpenter [Wed, 4 Jul 2018 09:42:50 +0000 (12:42 +0300)]
drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()

This doesn't affect runtime because in the current code "idx" is always
valid.

First, we read from "vgdev->capsets[idx].max_size" before checking
whether "idx" is within bounds.  And secondly the bounds check is off by
one so we could end up reading one element beyond the end of the
vgdev->capsets[] array.

Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180704094250.m7sgvvzg3dhcvv3h@kili.mountain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/virtio: Replace ttm_bo_unref with ttm_bo_put
Thomas Zimmermann [Tue, 31 Jul 2018 06:21:27 +0000 (08:21 +0200)]
drm/virtio: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062127.10131-3-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/virtio: Replace ttm_bo_reference with ttm_bo_get
Thomas Zimmermann [Tue, 31 Jul 2018 06:21:26 +0000 (08:21 +0200)]
drm/virtio: Replace ttm_bo_reference with ttm_bo_get

The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062127.10131-2-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/qxl: Replace ttm_bo_unref with ttm_bo_put
Thomas Zimmermann [Tue, 31 Jul 2018 06:35:59 +0000 (08:35 +0200)]
drm/qxl: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731063559.11629-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/cirrus: Replace ttm_bo_unref with ttm_bo_put
Thomas Zimmermann [Tue, 31 Jul 2018 06:31:28 +0000 (08:31 +0200)]
drm/cirrus: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731063128.11041-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/bochs: Replace ttm_bo_unref with ttm_bo_put
Thomas Zimmermann [Tue, 31 Jul 2018 06:28:51 +0000 (08:28 +0200)]
drm/bochs: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062851.10812-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
4 years agodrm/rockchip: vop: fix some register define error for px30
Sandy Huang [Tue, 28 Aug 2018 08:32:30 +0000 (16:32 +0800)]
drm/rockchip: vop: fix some register define error for px30

1. interrupt register define error lead to enable interrupt failed;
2. px30 unsupport hdmi output;
3. there are some hardware designed bug, we must swap win2 gate and
   enable offset, otherwise will appear vop iommu pagefault.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1535445150-40296-1-git-send-email-hjc@rock-chips.com
4 years agodrm/rockchip: Use struct_size() in devm_kzalloc()
Gustavo A. R. Silva [Sun, 26 Aug 2018 18:47:12 +0000 (13:47 -0500)]
drm/rockchip: Use struct_size() in devm_kzalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
int stuff;
        void *entry[];
};

instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

or, like in this particular case:

size = sizeof(struct foo) + sizeof(void *) * count;
instance = devm_kzalloc(dev, size, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = devm_kzalloc(dev, struct_size(instance, entry, count),
GFP_KERNEL);

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180826184712.GA9330@embeddedor.com
4 years agodrm/rockchip: fix coding style and incorrect description
Sandy Huang [Tue, 28 Aug 2018 07:44:55 +0000 (15:44 +0800)]
drm/rockchip: fix coding style and incorrect description

Align with other drivers, tab + 2 space key for description.
and edp/hdmi/dsi can be used on both rk3288 and rk3399.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1535442295-4007-1-git-send-email-hjc@rock-chips.com
4 years agodrm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
Peter Rosin [Sat, 25 Aug 2018 08:56:20 +0000 (10:56 +0200)]
drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes

This beats the heuristic that the connector is involved in what format
should be output for cases where this fails.

E.g. if there is a bridge that changes format between the encoder and the
connector, or if some of the RGB pins between the lcd controller and the
encoder are not routed on the PCB.

This is critical for the devices that have the "conflicting output
formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
RGB bits move around depending on the selected output mode. For
devices that do not have the "conflicting output formats" issue
(SAMA5D2, SAMA5D4), this is completely irrelevant.

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-5-peda@axentia.se
4 years agodrm/atmel-hlcdc: always iterate over the first 4 output endpoints
Peter Rosin [Sat, 25 Aug 2018 08:56:19 +0000 (10:56 +0200)]
drm/atmel-hlcdc: always iterate over the first 4 output endpoints

This enables more flexible devicetrees. You can e.g. have two output
nodes where one is not enabled, without the ordering affecting things.

Prior to this patch the active nodes had to have endpoint id zero and
upwards consecutively.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-4-peda@axentia.se
4 years agodt-bindings: display: atmel: optional video-interface of endpoints
Peter Rosin [Sat, 25 Aug 2018 08:56:18 +0000 (10:56 +0200)]
dt-bindings: display: atmel: optional video-interface of endpoints

With bus-type/bus-width properties in the endpoint nodes, the video-
interface of the connection can be specified for cases where the
heuristic fails to select the correct output mode. This can happen
e.g. if not all RGB pins are routed on the PCB; the driver has no
way of knowing this, and needs to be told explicitly.

This is critical for the devices that have the "conflicting output
formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
RGB bits move around depending on the selected output mode. For
devices that do not have the "conflicting output formats" issue
(SAMA5D2, SAMA5D4), this is completely irrelevant.

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-3-peda@axentia.se
4 years agodt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185
Peter Rosin [Sat, 25 Aug 2018 08:56:17 +0000 (10:56 +0200)]
dt-bindings: display: bridge: lvds-transmitter: add ti, ds90c185

Start list of actual chips compatible with "lvds-encoder".

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-2-peda@axentia.se
4 years agodrm/atmel-hlcdc: allow selecting a higher pixel-clock than requested
Peter Rosin [Fri, 24 Aug 2018 09:24:58 +0000 (11:24 +0200)]
drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested

But only if the highest pixel-clock frequency lower than requested
is significantly less accurate than the lowest frequency higher than
requested.

I pulled "10 times" as the discriminator out of the hat, and went with
that.

This is useful, if e.g. the target pixel-clock is 65MHz and the sys_clk
is 132MHz. In this case the highest possible pixel-clock lower than the
requested 65MHz is 52.8MHz, which is almost 20% off (and outside the
spec for the panel). The lowest possible pixel-clock higher than 65MHz
is 66MHz, which is a *much* better match, and only 1.5% off.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-3-peda@axentia.se
4 years agodrm/atmel-hlcdc: prefer a higher rate clock as pixel-clock base
Peter Rosin [Fri, 24 Aug 2018 09:24:57 +0000 (11:24 +0200)]
drm/atmel-hlcdc: prefer a higher rate clock as pixel-clock base

If the divider used to get the pixel-clock is small, the granularity
of the frequencies possible for the pixel-clock is quite coarse. E.g.
requesting a pixel-clock of 65MHz with a sys_clk of 132MHz results
in the divider being set to 3 ending up with 44MHz.

By preferring the doubled sys_clk as base, the divider instead ends
up as 5 yielding a pixel-clock of 52.8Mhz, which is a definite
improvement.

While at it, clamp the divider so that it does not overflow in case
it gets big.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-2-peda@axentia.se
4 years agodrm/bridge: ti-sn65dsi86: Add mystery delay to enable()
Sean Paul [Mon, 13 Aug 2018 21:30:46 +0000 (17:30 -0400)]
drm/bridge: ti-sn65dsi86: Add mystery delay to enable()

This patch adds a 70ms mystery delay to the bridge driver in enable.
By experimentation, it seems like it can go anywhere up until we
initiate semi-auto link training. If we don't have the delay, link
training fails.

I tried to root cause this as best I could, but neither the datasheet
for the panel nor the bridge mention a delay of this magnitude in their
timing requirements. So for now, add the mystery delay until someone
figures out a better fix.

Changes in v3:
- Added to the set

Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-8-sean@poorly.run
4 years agoMerge drm/drm-next into drm-misc-next
Sean Paul [Mon, 27 Aug 2018 14:00:03 +0000 (10:00 -0400)]
Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
4 years agoLinux 4.19-rc1 v4.19-rc1
Linus Torvalds [Sun, 26 Aug 2018 21:11:59 +0000 (14:11 -0700)]
Linux 4.19-rc1

4 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 20:39:05 +0000 (13:39 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer update from Thomas Gleixner:
 "New defines for the compat time* types so they can be shared between
  32bit and 64bit builds. Not used yet, but merging them now allows the
  actual conversions to be merged through different maintainer trees
  without dependencies

  We still have compat interfaces for 32bit on 64bit even with the new
  2038 safe timespec/val variants because pointer size is different. And
  for the old style timespec/val interfaces we need yet another 'compat'
  interface for both 32bit native and 32bit on 64bit"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  y2038: Provide aliases for compat helpers

4 years agoMerge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax
Linus Torvalds [Sun, 26 Aug 2018 18:48:42 +0000 (11:48 -0700)]
Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax

Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...

4 years agoMerge tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 18:41:08 +0000 (11:41 -0700)]
Merge tag 'gcc-plugins-v4.19-rc1-fix' of git://git./linux/kernel/git/kees/linux

Pull gcc plugin fix from Kees Cook:
 "Lift gcc test into Kconfig. This is for better behavior when the
  kernel is built with Clang, reported by Stefan Agner"

* tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: Disable when building under Clang

4 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 18:25:21 +0000 (11:25 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates from Thomas Gleixner:
 "Kernel:
   - Improve kallsyms coverage
   - Add x86 entry trampolines to kcore
   - Fix ARM SPE handling
   - Correct PPC event post processing

  Tools:
   - Make the build system more robust
   - Small fixes and enhancements all over the place
   - Update kernel ABI header copies
   - Preparatory work for converting libtraceevnt to a shared library
   - License cleanups"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
  tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
  tools arch x86: Update tools's copy of cpufeatures.h
  perf python: Fix pyrf_evlist__read_on_cpu() interface
  perf mmap: Store real cpu number in 'struct perf_mmap'
  perf tools: Remove ext from struct kmod_path
  perf tools: Add gzip_is_compressed function
  perf tools: Add lzma_is_compressed function
  perf tools: Add is_compressed callback to compressions array
  perf tools: Move the temp file processing into decompress_kmodule
  perf tools: Use compression id in decompress_kmodule()
  perf tools: Store compression id into struct dso
  perf tools: Add compression id into 'struct kmod_path'
  perf tools: Make is_supported_compression() static
  perf tools: Make decompress_to_file() function static
  perf tools: Get rid of dso__needs_decompress() call in __open_dso()
  perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble()
  perf tools: Get rid of dso__needs_decompress() call in read_object_code()
  tools lib traceevent: Change to SPDX License format
  perf llvm: Allow passing options to llc in addition to clang
  perf parser: Improve error message for PMU address filters
  ...

4 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 17:13:21 +0000 (10:13 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:

 - Correct the L1TF fallout on 32bit and the off by one in the 'too much
   RAM for protection' calculation.

 - Add a helpful kernel message for the 'too much RAM' case

 - Unbreak the VDSO in case that the compiler desides to use indirect
   jumps/calls and emits retpolines which cannot be resolved because the
   kernel uses its own thunks, which does not work for the VDSO. Make it
   use the builtin thunks.

 - Re-export start_thread() which was unexported when the 32/64bit
   implementation was unified. start_thread() is required by modular
   binfmt handlers.

 - Trivial cleanups

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/l1tf: Suggest what to do on systems with too much RAM
  x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
  x86/kvm/vmx: Remove duplicate l1d flush definitions
  x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
  x86/process: Re-export start_thread()
  x86/mce: Add notifier_block forward declaration
  x86/vdso: Fix vDSO build if a retpoline is emitted

4 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 16:55:28 +0000 (09:55 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq update from Thomas Gleixner:
 "A small set of updats/fixes for the irq subsystem:

   - Allow GICv3 interrupts to be configured as wake-up sources to
     enable wakeup from suspend

   - Make the error handling of the STM32 irqchip init function work

   - A set of small cleanups and improvements"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Allow interrupt to be configured as wake-up sources
  irqchip/tango: Set irq handler and data in one go
  dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support
  irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0
  irqchip/stm32: Fix init error handling
  irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP

4 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 26 Aug 2018 16:47:00 +0000 (09:47 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull licking update from Thomas Gleixner:
 "Mark the switch cases which fall through to the next case with the
  proper comment so the fallthrough compiler checks can be enabled"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Mark expected switch fall-throughs

4 years agoMerge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm...
Linus Torvalds [Sun, 26 Aug 2018 01:43:59 +0000 (18:43 -0700)]
Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm memory-failure update from Dave Jiang:
 "As it stands, memory_failure() gets thoroughly confused by dev_pagemap
  backed mappings. The recovery code has specific enabling for several
  possible page states and needs new enabling to handle poison in dax
  mappings.

  In order to support reliable reverse mapping of user space addresses:

   1/ Add new locking in the memory_failure() rmap path to prevent races
      that would typically be handled by the page lock.

   2/ Since dev_pagemap pages are hidden from the page allocator and the
      "compound page" accounting machinery, add a mechanism to determine
      the size of the mapping that encompasses a given poisoned pfn.

   3/ Given pmem errors can be repaired, change the speculatively
      accessed poison protection, mce_unmap_kpfn(), to be reversible and
      otherwise allow ongoing access from the kernel.

  A side effect of this enabling is that MADV_HWPOISON becomes usable
  for dax mappings, however the primary motivation is to allow the
  system to survive userspace consumption of hardware-poison via dax.
  Specifically the current behavior is:

     mce: Uncorrected hardware memory error in user-access at af34214200
     {1}[Hardware Error]: It has been corrected by h/w and requires no further action
     mce: [Hardware Error]: Machine check events logged
     {1}[Hardware Error]: event severity: corrected
     Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users
     [..]
     Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed
     mce: Memory error not recovered
     <reboot>

  ...and with these changes:

     Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000
     Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption
     Memory failure: 0x20cb00: recovery action for dax page: Recovered

  Given all the cross dependencies I propose taking this through
  nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax
  folks"

* tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pmem: Restore page attributes when clearing errors
  x86/memory_failure: Introduce {set, clear}_mce_nospec()
  x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses
  mm, memory_failure: Teach memory_failure() about dev_pagemap pages
  filesystem-dax: Introduce dax_lock_mapping_entry()
  mm, memory_failure: Collect mapping size in collect_procs()
  mm, madvise_inject_error: Let memory_failure() optionally take a page reference
  mm, dev_pagemap: Do not clear ->mapping on final put
  mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages
  filesystem-dax: Set page->index
  device-dax: Set page->index
  device-dax: Enable page_mapping()
  device-dax: Convert to vmf_insert_mixed and vm_fault_t

4 years agoMerge tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 26 Aug 2018 01:13:10 +0000 (18:13 -0700)]
Merge tag 'libnvdimm-for-4.19_misc' of gitolite.pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dave Jiang:
 "Collection of misc libnvdimm patches for 4.19 submission:

   - Adding support to read locked nvdimm capacity.

   - Change test code to make DSM failure code injection an override.

   - Add support for calculate maximum contiguous area for namespace.

   - Add support for queueing a short ARS when there is on going ARS for
     nvdimm.

   - Allow NULL to be passed in to ->direct_access() for kaddr and pfn
     params.

   - Improve smart injection support for nvdimm emulation testing.

   - Fix test code that supports for emulating controller temperature.

   - Fix hang on error before devm_memremap_pages()

   - Fix a bug that causes user memory corruption when data returned to
     user for ars_status.

   - Maintainer updates for Ross Zwisler emails and adding Jan Kara to
     fsdax"

* tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: fix ars_status output length calculation
  device-dax: avoid hang on error before devm_memremap_pages()
  tools/testing/nvdimm: improve emulation of smart injection
  filesystem-dax: Do not request kaddr and pfn when not required
  md/dm-writecache: Don't request pointer dummy_addr when not required
  dax/super: Do not request a pointer kaddr when not required
  tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()
  s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()
  libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access()
  acpi/nfit: queue issuing of ars when an uc error notification comes in
  libnvdimm: Export max available extent
  libnvdimm: Use max contiguous area for namespace size
  MAINTAINERS: Add Jan Kara for filesystem DAX
  MAINTAINERS: update Ross Zwisler's email address
  tools/testing/nvdimm: Fix support for emulating controller temperature
  tools/testing/nvdimm: Make DSM failure code injection an override
  acpi, nfit: Prefer _DSM over _LSR for namespace label reads
  libnvdimm: Introduce locked DIMM capacity support

4 years agoMerge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sat, 25 Aug 2018 21:12:36 +0000 (14:12 -0700)]
Merge tag 'armsoc-late' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC late updates from Olof Johansson:
 "A couple of late-merged changes that would be useful to get in this
  merge window:

   - Driver support for reset of audio complex on Meson platforms. The
     audio driver went in this merge window, and these changes have been
     in -next for a while (just not in our tree).

   - Power management fixes for IOMMU on Rockchip platforms, getting
     closer to kexec working on them, including Chromebooks.

   - Another pass updating "arm,psci" -> "psci" for some properties that
     have snuck in since last time it was done"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  iommu/rockchip: Move irq request past pm_runtime_enable
  iommu/rockchip: Handle errors returned from PM framework
  arm64: rockchip: Force CONFIG_PM on Rockchip systems
  ARM: rockchip: Force CONFIG_PM on Rockchip systems
  arm64: dts: Fix various entry-method properties to reflect documentation
  reset: imx7: Fix always writing bits as 0
  reset: meson: add meson audio arb driver
  reset: meson: add dt-bindings for meson-axg audio arb

4 years agoMerge tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy...
Linus Torvalds [Sat, 25 Aug 2018 20:40:38 +0000 (13:40 -0700)]
Merge tag 'kbuild-v4.19-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - add build_{menu,n,g,x}config targets for compile-testing Kconfig

 - fix and improve recursive dependency detection in Kconfig

 - fix parallel building of menuconfig/nconfig

 - fix syntax error in clang-version.sh

 - suppress distracting log from syncconfig

 - remove obsolete "rpm" target

 - remove VMLINUX_SYMBOL(_STR) macro entirely

 - fix microblaze build with CONFIG_DYNAMIC_FTRACE

 - move compiler test for dead code/data elimination to Kconfig

 - rename well-known LDFLAGS variable to KBUILD_LDFLAGS

 - misc fixes and cleanups

* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rename LDFLAGS to KBUILD_LDFLAGS
  kbuild: pass LDFLAGS to recordmcount.pl
  kbuild: test dead code/data elimination support in Kconfig
  initramfs: move gen_initramfs_list.sh from scripts/ to usr/
  vmlinux.lds.h: remove stale <linux/export.h> include
  export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
  Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
  kbuild: make sorting initramfs contents independent of locale
  kbuild: remove "rpm" target, which is alias of "rpm-pkg"
  kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
  kconfig: suppress "configuration written to .config" for syncconfig
  kconfig: fix "Can't open ..." in parallel build
  kbuild: Add a space after `!` to prevent parsing as file pattern
  scripts: modpost: check memory allocation results
  kconfig: improve the recursive dependency report
  kconfig: report recursive dependency involving 'imply'
  kconfig: error out when seeing recursive dependency
  kconfig: add build-only configurator targets
  scripts/dtc: consolidate include path options in Makefile

4 years agoMerge tag 'for-linus-20180825' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 25 Aug 2018 20:30:23 +0000 (13:30 -0700)]
Merge tag 'for-linus-20180825' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few small fixes for this merge window:

   - Locking imbalance fix for bcache (Shan Hai)

   - A few small fixes for wbt. One is a cleanup/prep, one is a fix for
     an existing issue, and the last two are fixes for changes that went
     into this merge window (me)"

* tag 'for-linus-20180825' of git://git.kernel.dk/linux-block:
  blk-wbt: don't maintain inflight counts if disabled
  blk-wbt: fix has-sleeper queueing check
  blk-wbt: use wq_has_sleeper() for wq active check
  blk-wbt: move disable check into get_limit()
  bcache: release dc->writeback_lock properly in bch_writeback_thread()

4 years agoMerge tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Sat, 25 Aug 2018 20:27:35 +0000 (13:27 -0700)]
Merge tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs

Pull UBIFS fix from Richard Weinberger:
 "Remove an empty file from UBIFS source"

* tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs:
  ubifs: Remove empty file.h

4 years agoMerge tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sat, 25 Aug 2018 20:17:53 +0000 (13:17 -0700)]
Merge tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Three small SMB3 fixes, one for stable"

* tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko to 2.12
  cifs: check kmalloc before use
  cifs: check if SMB2 PDU size has been padded and suppress the warning
  cifs: create a define for how many iovs we need for an SMB2_open()

4 years agomm/cow: don't bother write protecting already write-protected pages
Linus Torvalds [Mon, 9 Jul 2018 20:19:49 +0000 (13:19 -0700)]
mm/cow: don't bother write protecting already write-protected pages

This is not normally noticeable, but repeated forks are unnecessarily
expensive because they repeatedly dirty the parent page tables during
the page table copy operation.

It's trivial to just avoid write protecting the page table entry if it
was already not writable.

This patch was inspired by

    https://bugzilla.kernel.org/show_bug.cgi?id=200447

which points to an ancient "waste time re-doing fork" issue in the
presence of lots of signals.

That bug was fixed by Eric Biederman's signal handling series
culminating in commit c3ad2c3b02e9 ("signal: Don't restart fork when
signals come in"), but the unnecessary work for repeated forks is still
work just fixing, particularly since the fix is trivial.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agohpfs: remove unnecessary checks on the value of r when assigning error code
Colin Ian King [Sat, 25 Aug 2018 10:24:31 +0000 (12:24 +0200)]
hpfs: remove unnecessary checks on the value of r when assigning error code

At the point where r is being checked for different values, r is always
going to be equal to 2 as the previous if statements jump to end or end1
if r is not 2.  Hence the assignment to err can be simplified to just
err an assignment without any checks on the value or r.

Detected by CoverityScan, CID#1226737 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agolibata: maintainership update
Jens Axboe [Sat, 25 Aug 2018 16:10:33 +0000 (10:10 -0600)]
libata: maintainership update

Tejun Heo wrote:
>
> I asked Jens whether he could take care of the libata tree and he
> thankfully agreed, so, from now on, Jens will be the libata
> maintainer.
>
> Thanks a lot!

Thanks for your work in this area. I still remember the first linux
storage summit we did in Vancouver 2001, Tejun was invited to talk about
his libata error handling work. Before that, it was basically a crap
shoot if we recovered properly or not... A lot of water has flown under
the bridge since then!

Here's an "official" patch. Linus, can you apply it?

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge branch 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Linus Torvalds [Fri, 24 Aug 2018 20:20:33 +0000 (13:20 -0700)]
Merge branch 'for-4.19' of git://git./linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
 "Nothing too interesting. Mostly ahci and ahci_platform changes, many
  around power management"

* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
  ata: ahci_platform: enable to get and control reset
  ata: libahci_platform: add reset control support
  ata: add an extra argument to ahci_platform_get_resources()
  ata: sata_rcar: Add r8a77965 support
  ata: sata_rcar: exclude setting of PHY registers in Gen3
  ata: sata_rcar: really mask all interrupts on Gen2 and later
  Revert "ata: ahci_platform: allow disabling of hotplug to save power"
  ata: libahci: Allow reconfigure of DEVSLP register
  ata: libahci: Correct setting of DEVSLP register
  ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
  ata: ahci: Support state with min power but Partial low power state
  Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
  ata: sata_rcar: Add rudimentary Runtime PM support
  ata: sata_rcar: Provide a short-hand for &pdev->dev
  ata: Only output sg element mapped number in verbose debug
  ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG
  ata: ahci_platform: convert kcalloc to devm_kcalloc
  ata: ahci_platform: convert kzallloc to kcalloc
  ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown
  libata: remove ata_sff_data_xfer_noirq()
  ...

4 years agoMerge branch 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Linus Torvalds [Fri, 24 Aug 2018 20:19:27 +0000 (13:19 -0700)]
Merge branch 'for-4.19' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:
 "Just one commit from Steven to take out spin lock from trace event
  handlers"

* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/tracing: Move taking of spin lock out of trace event handlers

4 years agoMerge branch 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Fri, 24 Aug 2018 20:16:36 +0000 (13:16 -0700)]
Merge branch 'for-4.19' of git://git./linux/kernel/git/tj/wq

Pull workqueue updates from Tejun Heo:
 "Over the lockdep cross-release churn, workqueue lost some of the
  existing annotations. Johannes Berg restored it and also improved
  them"

* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: re-add lockdep dependencies for flushing
  workqueue: skip lockdep wq dependency in cancel_work_sync()

4 years agoMerge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 24 Aug 2018 20:10:38 +0000 (13:10 -0700)]
Merge tag 'iommu-updates-v4.19' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - PASID table handling updates for the Intel VT-d driver. It implements
   a global PASID space now so that applications usings multiple devices
   will just have one PASID.

 - A new config option to make iommu passthroug mode the default.

 - New sysfs attribute for iommu groups to export the type of the
   default domain.

 - A debugfs interface (for debug only) usable by IOMMU drivers to
   export internals to user-space.

 - R-Car Gen3 SoCs support for the ipmmu-vmsa driver

 - The ARM-SMMU now aborts transactions from unknown devices and devices
   not attached to any domain.

 - Various cleanups and smaller fixes all over the place.

* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
  iommu/omap: Fix cache flushes on L2 table entries
  iommu: Remove the ->map_sg indirection
  iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
  iommu/arm-smmu-v3: Prevent any devices access to memory without registration
  iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
  iommu/ipmmu-vmsa: Clarify supported platforms
  iommu/ipmmu-vmsa: Fix allocation in atomic context
  iommu: Add config option to set passthrough as default
  iommu: Add sysfs attribyte for domain type
  iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
  iommu/arm-smmu: Error out only if not enough context interrupts
  iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
  iommu/io-pgtable-arm: Fix pgtable allocation in selftest
  iommu/vt-d: Remove the obsolete per iommu pasid tables
  iommu/vt-d: Apply per pci device pasid table in SVA
  iommu/vt-d: Allocate and free pasid table
  iommu/vt-d: Per PCI device pasid table interfaces
  iommu/vt-d: Add for_each_device_domain() helper
  iommu/vt-d: Move device_domain_info to header
  iommu/vt-d: Apply global PASID in SVA
  ...

4 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Linus Torvalds [Fri, 24 Aug 2018 20:03:51 +0000 (13:03 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Add Daniel Lezcano as the reviewer of thermal framework and SoC
   driver changes (Daniel Lezcano).

 - Fix a bug in intel_dts_soc_thermal driver, which does not translate
   IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de
   Goede).

 - For device tree bindings, allow cooling devices sharing same trip
   point with same contribution value to share cooling map (Viresh
   Kumar).

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  dt-bindings: thermal: Allow multiple devices to share cooling map
  MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal
  Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number

4 years agoMerge tag 'apparmor-pr-2018-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 24 Aug 2018 20:00:33 +0000 (13:00 -0700)]
Merge tag 'apparmor-pr-2018-08-23' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "There is nothing major this time just four bug fixes and a patch to
  remove some dead code:

  Cleanups:
   - remove no-op permission check in policy_unpack

  Bug fixes:
   - fix an error code in __aa_create_ns()
   - fix failure to audit context info in build_change_hat
   - check buffer bounds when mapping permissions mask
   - fully initialize aa_perms struct when answering userspace query"

* tag 'apparmor-pr-2018-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: remove no-op permission check in policy_unpack
  apparmor: fix an error code in __aa_create_ns()
  apparmor: Fix failure to audit context info in build_change_hat
  apparmor: Fully initialize aa_perms struct when answering userspace query
  apparmor: Check buffer bounds when mapping permissions mask

4 years agoMerge tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 24 Aug 2018 16:34:23 +0000 (09:34 -0700)]
Merge tag 'powerpc-4.19-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - An implementation for the newly added hv_ops->flush() for the OPAL
   hvc console driver backends, I forgot to apply this after merging the
   hvc driver changes before the merge window.

 - Enable all PCI bridges at boot on powernv, to avoid races when
   multiple children of a bridge try to enable it simultaneously. This
   is a workaround until the PCI core can be enhanced to fix the races.

 - A fix to query PowerVM for the correct system topology at boot before
   initialising sched domains, seen in some configurations to cause
   broken scheduling etc.

 - A fix for pte_access_permitted() on "nohash" platforms.

 - Two commits to fix SIGBUS when using remap_pfn_range() seen on Power9
   due to a workaround when using the nest MMU (GPUs, accelerators).

 - Another fix to the VFIO code used by KVM, the previous fix had some
   bugs which caused guests to not start in some configurations.

 - A handful of other minor fixes.

Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Christophe Leroy,
Hari Bathini, Luke Dashjr, Mahesh Salgaonkar, Nicholas Piggin, Paul
Mackerras, Srikar Dronamraju.

* tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mce: Fix SLB rebolting during MCE recovery path.
  KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages
  powerpc/mm/radix: Only need the Nest MMU workaround for R -> RW transition
  powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid.
  powerpc/nohash: fix pte_access_permitted()
  powerpc/topology: Get topology for shared processors at boot
  powerpc64/ftrace: Include ftrace.h needed for enable/disable calls
  powerpc/powernv/pci: Work around races in PCI bridge enabling
  powerpc/fadump: cleanup crash memory ranges support
  powerpc/powernv: provide a console flush operation for opal hvc driver
  powerpc/traps: Avoid rate limit messages from show unhandled signals
  powerpc/64s: Fix PACA_IRQ_HARD_DIS accounting in idle_power4()

4 years agodrm: Add per-plane pixel blend mode property
Lowry Li [Thu, 23 Aug 2018 08:30:19 +0000 (16:30 +0800)]
drm: Add per-plane pixel blend mode property

Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.

Adds a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.

Defines three blend modes in drm_blend.h.

Changes since v1:
 - Moves the blending equation into the DOC comment
 - Refines the comments of drm_plane_create_blend_mode_property to not
   enumerate the #defines, but instead the string values
 - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
Changes since v2:
 - Refines the comments of drm_plane_create_blend_mode_property:
      1) Puts the descriptions (after the ":") on a new line
      2) Adds explaining why @supported_modes need PREMUL as default
Changes since v3:
 - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
   can calculate the index itself just fine, so no point in having the
   caller pass it in.
 - Since the current DRM assumption is that alpha is premultiplied
   as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
 - Refines some comments.
Changes since v4:
 - Adds comments in drm_blend.h.
 - Removes setting default value in drm_plane_create_blend_mode_property()
   as it is already in __drm_atomic_helper_plane_reset().
 - Fixes to use state->pixel_blend_mode instead of using
   plane->state->pixel_blend_mode in reset function.
 - Rebases on drm-misc-next.

Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Lowry Li <lowry.li@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/245734/
4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 24 Aug 2018 16:31:34 +0000 (09:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Martin Schwidefsky:

 - A couple of patches for the zcrypt driver:
     + Add two masks to determine which AP cards and queues are host
       devices, this will be useful for KVM AP device passthrough
     + Add-on patch to improve the parsing of the new apmask and aqmask
     + Some code beautification

 - Second try to reenable the GCC plugins, the first patch set had a
   patch to do this but the merge somehow missed this

 - Remove the s390 specific GCC version check and use the generic one

 - Three patches for kdump, two bug fixes and one cleanup

 - Three patches for the PCI layer, one bug fix and two cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: remove gcc version check (4.3 or newer)
  s390/zcrypt: hex string mask improvements for apmask and aqmask.
  s390/zcrypt: AP bus support for alternate driver(s)
  s390/zcrypt: code beautify
  s390/zcrypt: switch return type to bool for ap_instructions_available()
  s390/kdump: Remove kzalloc_panic
  s390/kdump: Fix memleak in nt_vmcoreinfo
  s390/kdump: Make elfcorehdr size calculation ABI compliant
  s390/pci: remove fmb address from debug output
  s390/pci: remove stale rc
  s390/pci: fix out of bounds access during irq setup
  s390/zcrypt: fix ap_instructions_available() returncodes
  s390: reenable gcc plugins for real

4 years agoMerge tag 'acpi-4.19-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 24 Aug 2018 16:29:44 +0000 (09:29 -0700)]
Merge tag 'acpi-4.19-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI Kconfig fix from Rafael Wysocki:
 "Fix recent menuconfig breakage causing it to present ACPI-specific
  options incorrectly (Arnd Bergmann)"

* tag 'acpi-4.19-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: fix menuconfig presentation of ACPI submenu

4 years agoMerge branch 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Fri, 24 Aug 2018 16:25:39 +0000 (09:25 -0700)]
Merge branch 'userns-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull namespace fixes from Eric Biederman:
 "This is a set of four fairly obvious bug fixes:

   - a switch from d_find_alias to d_find_any_alias because the xattr
     code perversely takes a dentry

   - two mutex vs copy_to_user fixes from Jann Horn

   - a fix to use a sanitized size not the size userspace passed in from
     Christian Brauner"

* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  getxattr: use correct xattr length
  sys: don't hold uts_sem while accessing userspace memory
  userns: move user access out of the mutex
  cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()

4 years agoMerge tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 24 Aug 2018 16:22:54 +0000 (09:22 -0700)]
Merge tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Just a couple of fixes"

  One MAINTAINERS address change, two panels fixes, and set of amdgpu
  fixes (build fixes, display fixes and some others)"

* tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm:
  drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80
  drm/amd/display: Don't build DCN1 when kcov is enabled
  Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"
  drm/amdgpu/display: disable eDP fast boot optimization on DCE8
  drm/amdgpu: fix amdgpu_amdkfd_remove_eviction_fence v3
  drm/amdgpu: fix incorrect use of drm_file->pid
  drm/amdgpu: fix incorrect use of fcheck
  drm/powerplay: enable dpm under pass-through
  drm/amdgpu: access register without KIQ
  drm/amdgpu: set correct base for THM/NBIF/MP1 IP
  drm/amd/display: fix dentist did ranges
  drm/amd/display: make dp_ss_off optional
  drm/amd/display: fix dp_ss_control vbios flag parsing
  drm/amd/display: Do not retain link settings
  MAINTAINERS: drm-misc: Change seanpaul's email address
  drm/panel: simple: tv123wam: Add unprepare delay

4 years agoMerge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Fri, 24 Aug 2018 15:57:26 +0000 (08:57 -0700)]
Merge branch 'i2c/for-next' of git://git./linux/kernel/git/wsa/linux

Pull second i2c update from Wolfram Sang:
 "As promised, here is my 2nd pull request for I2C, containing:

   - removal of the attach_adapter callback, converting its last user

   - removal of any __deprecated usage within I2C

   - one email address update

   - some SPDX conversion"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: don't use any __deprecated handling anymore
  i2c: use SPDX identifier for Renesas drivers
  i2c: ocores: update my email address
  i2c: remove deprecated attach_adapter callback
  macintosh: therm_windtunnel: drop using attach_adapter