Taehee Yoo [Tue, 16 Oct 2018 15:35:10 +0000 (00:35 +0900)]
net: bpfilter: use get_pid_task instead of pid_task
pid_task() dereferences rcu protected tasks array.
But there is no rcu_read_lock() in shutdown_umh() routine so that
rcu_read_lock() is needed.
get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock()
then calls pid_task(). if task isn't NULL, it increases reference count
of task.
test commands:
%modprobe bpfilter
%modprobe -rv bpfilter
splat looks like:
[15102.030932] =============================
[15102.030957] WARNING: suspicious RCU usage
[15102.030985] 4.19.0-rc7+ #21 Not tainted
[15102.031010] -----------------------------
[15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage!
[15102.031063]
other info that might help us debug this:
[15102.031332]
rcu_scheduler_active = 2, debug_locks = 1
[15102.031363] 1 lock held by modprobe/1570:
[15102.031389] #0:
00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter]
[15102.031552]
stack backtrace:
[15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21
[15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[15102.031628] Call Trace:
[15102.031676] dump_stack+0xc9/0x16b
[15102.031723] ? show_regs_print_info+0x5/0x5
[15102.031801] ? lockdep_rcu_suspicious+0x117/0x160
[15102.031855] pid_task+0x134/0x160
[15102.031900] ? find_vpid+0xf0/0xf0
[15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter]
[15102.032055] stop_umh+0x46/0x52 [bpfilter]
[15102.032092] __x64_sys_delete_module+0x47e/0x570
[ ... ]
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Tue, 16 Oct 2018 13:06:41 +0000 (15:06 +0200)]
ptp: fix Spectre v1 vulnerability
pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)
Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=
152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Sat, 13 Oct 2018 10:26:53 +0000 (13:26 +0300)]
sparc: vDSO: Silence an uninitialized variable warning
Smatch complains that "val" would be uninitialized if kstrtoul() fails.
Fixes: 9a08862a5d2e ("vDSO for sparc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Sat, 13 Oct 2018 02:14:58 +0000 (19:14 -0700)]
net: qla3xxx: Remove overflowing shift statement
Clang currently warns:
drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
~~~~~~~~~~~~~~ ^ ~~
1 warning generated.
The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in
64424509440,
well above UINT_MAX.
Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.
Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 Oct 2018 04:51:14 +0000 (21:51 -0700)]
Merge branch 'geneve-vxlan-mtu'
Stefano Brivio says:
====================
geneve, vxlan: Don't set exceptions if skb->len < mtu
This series fixes the exception abuse described in 2/2, and 1/2
is just a preparatory change to make 2/2 less ugly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 12 Oct 2018 21:53:59 +0000 (23:53 +0200)]
geneve, vxlan: Don't set exceptions if skb->len < mtu
We shouldn't abuse exceptions: if the destination MTU is already higher
than what we're transmitting, no exception should be created.
Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 12 Oct 2018 21:53:58 +0000 (23:53 +0200)]
geneve, vxlan: Don't check skb_dst() twice
Commit
f15ca723c1eb ("net: don't call update_pmtu unconditionally") avoids
that we try updating PMTU for a non-existent destination, but didn't clean
up cases where the check was already explicit. Drop those redundant checks.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 Oct 2018 04:28:01 +0000 (21:28 -0700)]
sparc: Fix syscall fallback bugs in VDSO.
First, the trap number for 32-bit syscalls is 0x10.
Also, only negate the return value when syscall error is indicated by
the carry bit being set.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Rostedt (VMware) [Tue, 16 Oct 2018 03:31:42 +0000 (23:31 -0400)]
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.
Cc: stable@vger.kernel.org
Fixes: f96e8577da102 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Mathieu Desnoyers [Sat, 13 Oct 2018 19:10:50 +0000 (15:10 -0400)]
tracepoint: Fix tracepoint array element size mismatch
commit
46e0c9be206f ("kernel: tracepoints: add support for relative
references") changes the layout of the __tracepoint_ptrs section on
architectures supporting relative references. However, it does so
without turning struct tracepoint * const into const int elsewhere in
the tracepoint code, which has the following side-effect:
Setting mod->num_tracepoints is done in by module.c:
mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs",
sizeof(*mod->tracepoints_ptrs),
&mod->num_tracepoints);
Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size
(rather than sizeof(int)), num_tracepoints is erroneously set to half the
size it should be on 64-bit arch. So a module with an odd number of
tracepoints misses the last tracepoint due to effect of integer
division.
So in the module going notifier:
for_each_tracepoint_range(mod->tracepoints_ptrs,
mod->tracepoints_ptrs + mod->num_tracepoints,
tp_module_going_check_quiescent, NULL);
the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually
evaluates to something within the bounds of the array, but miss the
last tracepoint if the number of tracepoints is odd on 64-bit arch.
Fix this by introducing a new typedef: tracepoint_ptr_t, which
is either "const int" on architectures that have PREL32 relocations,
or "struct tracepoint * const" on architectures that does not have
this feature.
Also provide a new tracepoint_ptr_defer() static inline to
encapsulate deferencing this type rather than duplicate code and
ugly idefs within the for_each_tracepoint_range() implementation.
This issue appears in 4.19-rc kernels, and should ideally be fixed
before the end of the rc cycle.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Gustavo A. R. Silva [Tue, 16 Oct 2018 10:16:45 +0000 (12:16 +0200)]
usb: gadget: storage: Fix Spectre v1 vulnerability
num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)
Fix this by sanitizing num before using it to index
fsg_opts->common->luns
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=
152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Tue, 16 Oct 2018 20:08:29 +0000 (17:08 -0300)]
perf tools: Stop fallbacking to kallsyms for vdso symbols lookup
David reports that:
<quote>
Perf has this hack where it uses the kernel symbol map as a backup when
a symbol can't be found in the user's symbol table(s).
This causes problems because the tests driving this code path use
machine__kernel_ip(), and that is completely meaningless on Sparc. On
sparc64 the kernel and user live in physically separate virtual address
spaces, rather than a shared one. And the kernel lives at a virtual
address that overlaps common userspace addresses. So this test passes
almost all the time when a user symbol lookup fails.
The consequence of this is that, if the unfound user virtual address in
the sample doesn't match up to a kernel symbol either, we trigger things
like this code in builtin-top.c:
if (al.sym == NULL && al.map != NULL) {
const char *msg = "Kernel samples will not be resolved.\n";
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it. So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map, bail out.
*
* We may never get here, for instance, if we use -K/
* --hide-kernel-symbols, even if the user specifies an
* invalid --vmlinux ;-)
*/
if (!machine->kptr_restrict_warned && !top->vmlinux_warned &&
__map__is_kernel(al.map) && map__has_symbols(al.map)) {
if (symbol_conf.vmlinux_name) {
char serr[256];
dso__strerror_load(al.map->dso, serr, sizeof(serr));
ui__warning("The %s file can't be used: %s\n%s",
symbol_conf.vmlinux_name, serr, msg);
} else {
ui__warning("A vmlinux file was not found.\n%s",
msg);
}
if (use_browser <= 0)
sleep(5);
top->vmlinux_warned = true;
}
}
When I fire up a compilation on sparc, this triggers immediately.
I'm trying to figure out what the "backup to kernel map" code is
accomplishing.
I see some language in the current code and in the changes that have
happened in this area talking about vdso. Does that really happen?
The vdso is mapped into userspace virtual addresses, not kernel ones.
More history. This didn't cause problems on sparc some time ago,
because the kernel IP check used to be "ip < 0" :-) Sparc kernel
addresses are not negative. But now with machine__kernel_ip(), which
works using the symbol table determined kernel address range, it does
trigger.
What it all boils down to is that on architectures like sparc,
machine__kernel_ip() should always return false in this scenerio, and
therefore this kind of logic:
if (cpumode == PERF_RECORD_MISC_USER && machine &&
mg != &machine->kmaps &&
machine__kernel_ip(machine, al->addr)) {
is basically invalid. PERF_RECORD_MISC_USER implies no kernel address
can possibly match for the sample/event in question (no matter how
hard you try!) :-)
</>
So, I thought something had changed and in the past we would somehow
find that address in the kallsyms, but I couldn't find anything to back
that up, the patch introducing this is over a decade old, lots of things
changed, so I was just thinking I was missing something.
I tried a gtod busy loop to generate vdso activity and added a 'perf
probe' at that branch, on x86_64 to see if it ever gets hit:
Made thread__find_map() noinline, as 'perf probe' in lines of inline
functions seems to not be working, only at function start. (Masami?)
# perf probe -x ~/bin/perf -L thread__find_map:57
<thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57>
57 if (cpumode == PERF_RECORD_MISC_USER && machine &&
58 mg != &machine->kmaps &&
59 machine__kernel_ip(machine, al->addr)) {
60 mg = &machine->kmaps;
61 load_map = true;
62 goto try_again;
}
} else {
/*
* Kernel maps might be changed when loading
* symbols so loading
* must be done prior to using kernel maps.
*/
69 if (load_map)
70 map__load(al->map);
71 al->addr = al->map->map_ip(al->map, al->addr);
# perf probe -x ~/bin/perf thread__find_map:60
Added new event:
probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:thread__find_map -aR sleep 1
#
Then used this to see if, system wide, those probe points were being hit:
# perf trace -e *perf:thread*/max-stack=8/
^C[root@jouet ~]#
No hits when running 'perf top' and:
# cat gtod.c
#include <sys/time.h>
int main(void)
{
struct timeval tv;
while (1)
gettimeofday(&tv, 0);
return 0;
}
[root@jouet c]# ./gtod
^C
Pressed 'P' in 'perf top' and the [vdso] samples are there:
62.84% [vdso] [.] __vdso_gettimeofday
8.13% gtod [.] main
7.51% [vdso] [.] 0x0000000000000914
5.78% [vdso] [.] 0x0000000000000917
5.43% gtod [.] _init
2.71% [vdso] [.] 0x000000000000092d
0.35% [kernel] [k] native_io_delay
0.33% libc-2.26.so [.] __memmove_avx_unaligned_erms
0.20% [vdso] [.] 0x000000000000091d
0.17% [i2c_i801] [k] i801_access
0.06% firefox [.] free
0.06% libglib-2.0.so.0.5400.3 [.] g_source_iter_next
0.05% [vdso] [.] 0x0000000000000919
0.05% libpthread-2.26.so [.] __pthread_mutex_lock
0.05% libpixman-1.so.0.34.0 [.] 0x000000000006d3a7
0.04% [kernel] [k] entry_SYSCALL_64_trampoline
0.04% libxul.so [.] style::dom_apis::query_selector_slow
0.04% [kernel] [k] module_get_kallsym
0.04% firefox [.] malloc
0.04% [vdso] [.] 0x0000000000000910
I added a 'perf probe' to thread__find_map:69, and that surely got tons
of hits, i.e. for every map found, just to make sure the 'perf probe'
command was really working.
In the process I noticed a bug, we're only have records for '[vdso]' for
pre-existing commands, i.e. ones that are running when we start 'perf top',
when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps.
I.e. like this, for preexisting processes with a vdso map, again,
tracing for all the system, only pre-existing processes get a [vdso] map
(when having one):
[root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso
Added new event:
probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1
[root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/
0.000 probe_perf:__machine__addnew_vdso:(568eb3)
__machine__addnew_vdso (/home/acme/bin/perf)
map__new (/home/acme/bin/perf)
machine__process_mmap2_event (/home/acme/bin/perf)
machine__process_event (/home/acme/bin/perf)
perf_event__process (/home/acme/bin/perf)
perf_tool__process_synth_event (/home/acme/bin/perf)
perf_event__synthesize_mmap_events (/home/acme/bin/perf)
__event__synthesize_thread (/home/acme/bin/perf)
The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow
'perf top' is not getting those records while 'perf record' is:
# perf record ~acme/c/gtod
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ]
# perf report -D | grep PERF_RECORD_MMAP2
71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137
541179306]: r-xp /home/acme/c/gtod
71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00
3146370 854107250]: r-xp /usr/lib64/ld-2.26.so
71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00
3149723 262067164]: r-xp /usr/lib64/libc-2.26.so
#
# perf script | grep vdso | head
gtod 25484 71293.612768:
2485554 cycles:ppp:
7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.613576:
2149343 cycles:ppp:
7ffcdb53a917 [unknown] ([vdso])
gtod 25484 71293.614274:
1814652 cycles:ppp:
7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso])
gtod 25484 71293.614862:
1669070 cycles:ppp:
7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615404:
1451589 cycles:ppp:
7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
gtod 25484 71293.615999:
1269941 cycles:ppp:
7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.616405:
1177946 cycles:ppp:
7ffcdb53a914 [unknown] ([vdso])
gtod 25484 71293.616775:
1121290 cycles:ppp:
7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso])
gtod 25484 71293.617150:
1037721 cycles:ppp:
7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
gtod 25484 71293.617478: 994526 cycles:ppp:
7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
#
The patch is the obvious one and with it we also continue to resolve
vdso symbols for pre-existing processes in 'perf top' and for all
processes in 'perf record' + 'perf report/script'.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David Miller <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jens Axboe [Wed, 17 Oct 2018 15:45:49 +0000 (09:45 -0600)]
Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus
Pull single NVMe fix from Christoph.
* 'nvme-4.19' of git://git.infradead.org/nvme:
nvme: remove ns sibling before clearing path
Greg Kroah-Hartman [Wed, 17 Oct 2018 12:01:00 +0000 (14:01 +0200)]
Merge branch 'parisc-4.19-3' of git://git./linux/kernel/git/deller/parisc-linux
Helge writes:
"parisc fix:
Fix an unitialized variable usage in the parisc unwind code."
* 'parisc-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix uninitialized variable usage in unwind.c
Greg Kroah-Hartman [Wed, 17 Oct 2018 11:40:10 +0000 (13:40 +0200)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Stephen writes:
"clk fixes for v4.19-rc8
One fix for the Allwinner A10 SoC's audio PLL that wasn't properly
set and generating noise."
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: sun4i: Set VCO and PLL bias current to lowest setting
Sebastian Andrzej Siewior [Tue, 16 Oct 2018 20:25:25 +0000 (22:25 +0200)]
x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU
Booting an i486 with "no387 nofxsr" ends with with the following crash:
math_emulate: 0060:
c101987d
Kernel panic - not syncing: Math emulation needed in kernel
on the first context switch in user land.
The reason is that copy_fpregs_to_fpstate() tries FNSAVE which does not work
as the FPU is turned off.
This bug was introduced in:
f1c8cd0176078 ("x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active")
Add a check for X86_FEATURE_FPU before trying to save FPU registers (we
have such a check in switch_fpu_finish() already).
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: f1c8cd0176078 ("x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-4-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sebastian Andrzej Siewior [Tue, 16 Oct 2018 20:25:24 +0000 (22:25 +0200)]
x86/fpu: Remove second definition of fpu in __fpu__restore_sig()
Commit:
c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
introduced the 'fpu' variable at top of __restore_xstate_sig(),
which now shadows the other definition:
arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one
arch/x86/kernel/fpu/signal.c:271:20: originally declared here
Remove the shadowed definition of 'fpu', as the two definitions are the same.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c5bedc6847c3b ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active")
Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Sun, 14 Oct 2018 18:38:18 +0000 (11:38 -0700)]
x86/entry/64: Further improve paranoid_entry comments
Commit:
16561f27f94e ("x86/entry: Add some paranoid entry/exit CR3 handling comments")
... added some comments. This improves them a bit:
- When I first read the new comments, it was unclear to me whether
they were referring to the case where paranoid_entry interrupted
other entry code or where paranoid_entry was itself interrupted.
Clarify it.
- Remove the EBX comment. We no longer use EBX as a SWAPGS
indicator.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c47daa1888dc2298e7e1d3f82bd76b776ea33393.1539542111.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Kiszka [Mon, 15 Oct 2018 14:09:29 +0000 (16:09 +0200)]
x86/entry/32: Clear the CS high bits
Even if not on an entry stack, the CS's high bits must be
initialized because they are unconditionally evaluated in
PARANOID_EXIT_TO_KERNEL_MODE.
Failing to do so broke the boot on Galileo Gen2 and IOT2000 boards.
[ bp: Make the commit message tone passive and impartial. ]
Fixes: b92a165df17e ("x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrea Arcangeli <aarcange@redhat.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Brian Gerst <brgerst@gmail.com>
CC: Dave Hansen <dave.hansen@intel.com>
CC: David Laight <David.Laight@aculab.com>
CC: Denys Vlasenko <dvlasenk@redhat.com>
CC: Eduardo Valentin <eduval@amazon.com>
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Josh Poimboeuf <jpoimboe@redhat.com>
CC: Juergen Gross <jgross@suse.com>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Will Deacon <will.deacon@arm.com>
CC: aliguori@amazon.com
CC: daniel.gruss@iaik.tugraz.at
CC: hughd@google.com
CC: keescook@google.com
CC: linux-mm <linux-mm@kvack.org>
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/f271c747-1714-5a5b-a71f-ae189a093b8d@siemens.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Tue, 16 Oct 2018 15:06:07 +0000 (17:06 +0200)]
perf tools: Pass build flags to traceevent build
So the extra user build flags are propagated to libtraceevent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: "Herton R. Krzesinski" <herton@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Link: http://lkml.kernel.org/r/20181016150614.21260-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff [Wed, 26 Sep 2018 13:52:07 +0000 (15:52 +0200)]
perf report: Don't crash on invalid inline debug information
When the function name for an inline frame is invalid, we must not try
to demangle this symbol, otherwise we crash with:
#0 0x0000555555895c01 in bfd_demangle ()
#1 0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215
#2 dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400
#3 0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89
#4 inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264
#5 0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/
186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0,
line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313
#6 0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/
186d14bb94f3c6161c010926da66033d24fce5/elf")
at util/srcline.c:358
So instead handle the case where we get invalid function names for
inlined frames and use a fallback '??' function name instead.
While this crash was originally reported by Hadrien for rust code, I can
now also reproduce it with trivial C++ code. Indeed, it seems like
libbfd fails to interpret the debug information for the inline frame
symbol name:
$ addr2line -e /home/milian/.debug/.build-id/f7/
186d14bb94f3c6161c010926da66033d24fce5/elf -if b48
main
/usr/include/c++/8.2.1/complex:610
??
/usr/include/c++/8.2.1/complex:618
??
/usr/include/c++/8.2.1/complex:675
??
/usr/include/c++/8.2.1/complex:685
main
/home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39
I've reported this bug upstream and also attached a patch there which
should fix this issue:
https://sourceware.org/bugzilla/show_bug.cgi?id=23715
Reported-by: Hadrien Grasland <grasland@lal.in2p3.fr>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a64489c56c30 ("perf report: Find the inline stack for a given address")
[ The above 'Fixes:' cset is where originally the problem was
introduced, i.e. using a2l->funcname without checking if it is NULL,
but this current patch fixes the current codebase, i.e. multiple csets
were applied after
a64489c56c30 before the problem was reported by Hadrien ]
Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Xin Long [Tue, 16 Oct 2018 07:52:02 +0000 (15:52 +0800)]
sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
According to rfc7496 section 4.3 or 4.4:
sprstat_policy: This parameter indicates for which PR-SCTP policy
the user wants the information. It is an error to use
SCTP_PR_SCTP_NONE in sprstat_policy. If SCTP_PR_SCTP_ALL is used,
the counters provided are aggregated over all supported policies.
We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL
instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is
an error to use SCTP_PR_SCTP_NONE in sprstat_policy. "
Fixes: 826d253d57b1 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt")
Fixes: d229d48d183f ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Tue, 16 Oct 2018 16:53:31 +0000 (18:53 +0200)]
Merge git://git./linux/kernel/git/davem/sparc
David writes:
"Sparc fixes
1) Revert the %pOF change, it causes regressions.
2) Wire up io_pgetevents().
3) Fix perf events on single-PCR sparc64 cpus.
4) Do proper perf event throttling like arm and x86."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Revert "sparc: Convert to using %pOFn instead of device_node.name"
sparc64: Set %l4 properly on trap return after handling signals.
sparc64: Make proc_id signed.
sparc: Throttle perf events properly.
sparc: Fix single-pcr perf event counter management.
sparc: Wire up io_pgetevents system call.
sunvdc: Remove VLA usage
Greg Kroah-Hartman [Tue, 16 Oct 2018 16:52:00 +0000 (18:52 +0200)]
Merge tag 'selinux-pr-
20181015' of git://git./linux/kernel/git/pcmoore/selinux
Paul writes:
"SELinux fixes for v4.19
We've got one SELinux "fix" that I'd like to get into v4.19 if
possible. I'm using double quotes on "fix" as this is just an update
to the MAINTAINERS file and not a code change. From my perspective,
MAINTAINERS updates generally don't warrant inclusion during the -rcX
phase, but this is a change to the mailing list location so it seemed
prudent to get this in before v4.19 is released"
* tag 'selinux-pr-
20181015' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
MAINTAINERS: update the SELinux mailing list location
Gustavo A. R. Silva [Tue, 16 Oct 2018 14:59:01 +0000 (16:59 +0200)]
RDMA/ucma: Fix Spectre v1 vulnerability
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=
152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Gustavo A. R. Silva [Tue, 16 Oct 2018 14:32:40 +0000 (16:32 +0200)]
IB/ucm: Fix Spectre v1 vulnerability
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=
152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
David Miller [Fri, 12 Oct 2018 05:46:55 +0000 (22:46 -0700)]
perf cpu_map: Align cpu map synthesized events properly.
The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af07 ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 16 Oct 2018 11:48:18 +0000 (13:48 +0200)]
perf tools: Fix tracing_path_mount proper path
If there's no tracefs (RHEL7) support the tracing_path_mount
returns debugfs path which results in following fail:
# perf probe sys_write
kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS.
Error: Failed to add events.
In tracing_path_debugfs_mount function we need to return the
'tracing' path instead of just the mount to make it work:
# perf probe sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Adding the 'return tracing_path;' also to tracing_path_tracefs_mount
function just for consistency with tracing_path_debugfs_mount.
Upstream keeps working, because it has the tracefs support.
Link: http://lkml.kernel.org/n/tip-yiwkzexq9fk1ey1xg3gnjlw4@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 23773ca18b39 ("perf tools: Make perf aware of tracefs")
Link: http://lkml.kernel.org/r/20181016114818.3595-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jarod Wilson [Thu, 6 Sep 2018 22:18:12 +0000 (18:18 -0400)]
perf tools: Fix use of alternatives to find JDIR
When a build is run from something like a cron job, the user's $PATH is
rather minimal, of note, not including /usr/sbin in my own case. Because
of that, an automated rpm package build ultimately fails to find
libperf-jvmti.so, because somewhere within the build, this happens...
/bin/sh: alternatives: command not found
/bin/sh: alternatives: command not found
Makefile.config:849: No openjdk development package found, please install
JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
...and while the build continues, libperf-jvmti.so isn't built, and
things fall down when rpm tries to find all the %files specified. Exact
same system builds everything just fine when the job is launched from a
login shell instead of a cron job, since alternatives is in $PATH, so
openjdk is actually found.
The test required to get into this section of code actually specifies
the full path, as does a block just above it, so let's do that here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Fixes: d4dfdf00d43e ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clint Taylor [Fri, 5 Oct 2018 21:52:15 +0000 (14:52 -0700)]
drm/edid: VSDB yCBCr420 Deep Color mode bit definitions
HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct
definitions in the header for the mask to work correctly.
Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
Jiri Olsa [Wed, 3 Oct 2018 21:20:52 +0000 (23:20 +0200)]
perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus
John reported crash when recording on an event under PMU with cpumask defined:
root@localhost:~# ./perf_debug_ record -e armv8_pmuv3_0/br_mis_pred/ sleep 1
perf: Segmentation fault
Obtained 9 stack frames.
./perf_debug_() [0x4c5ef8]
[0xffff82ba267c]
./perf_debug_() [0x4bc5a8]
./perf_debug_() [0x419550]
./perf_debug_() [0x41a928]
./perf_debug_() [0x472f58]
./perf_debug_() [0x473210]
./perf_debug_() [0x4070f4]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe0) [0xffff8294c8a0]
Segmentation fault (core dumped)
We synthesize an update event that needs to touch the evsel id array, which is
not defined at that time. Fixing this by forcing the id allocation for events
with their own cpus.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181003212052.GA32371@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alan Stern [Mon, 15 Oct 2018 20:55:04 +0000 (16:55 -0400)]
USB: fix the usbfs flag sanitization for control transfers
Commit
7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the
transfer flags for URBs submitted from userspace via usbfs. However,
the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be
allowed for a control transfer was added in the wrong place, before
the code has properly determined the direction of the control
transfer. (Control transfers are special because for them, the
direction is set by the bRequestType byte of the Setup packet rather
than direction bit of the endpoint address.)
This patch moves code which sets up the allow_short flag for control
transfers down after is_in has been set to the correct value.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com
Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more")
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Tue, 16 Oct 2018 06:21:48 +0000 (08:21 +0200)]
parisc: Fix uninitialized variable usage in unwind.c
As noticed by Dave Anglin, the last commit introduced a small bug where
the potentially uninitialized r struct is used instead of the regs
pointer as input for unwind_frame_init(). Fix it.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: John David Anglin <dave.anglin@bell.net>
Song Muchun [Sun, 14 Oct 2018 11:26:12 +0000 (19:26 +0800)]
sched/fair: Fix the min_vruntime update logic in dequeue_entity()
The comment and the code around the update_min_vruntime() call in
dequeue_entity() are not in agreement.
From commit:
b60205c7c558 ("sched/fair: Fix min_vruntime tracking")
I think that we want to update min_vruntime when a task is sleeping/migrating.
So, the check is inverted there - fix it.
Signed-off-by: Song Muchun <smuchun@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b60205c7c558 ("sched/fair: Fix min_vruntime tracking")
Link: http://lkml.kernel.org/r/20181014112612.2614-1-smuchun@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David S. Miller [Tue, 16 Oct 2018 06:17:25 +0000 (23:17 -0700)]
Merge branch 'nfp-fix-pedit-set-action-offloads'
Jakub Kicinski says:
====================
nfp: fix pedit set action offloads
Pieter says:
This set fixes set actions when using multiple pedit actions with
partial masks and with multiple keys per pedit action. Additionally
it fixes set ipv6 pedit action offloads when using it in combination
with other header keys.
The problem would only trigger if one combines multiple pedit actions
of the same type with partial masks, e.g.:
$ tc filter add dev netdev protocol ip parent ffff: \
flower indev netdev \
ip_proto tcp \
action pedit ex munge \
ip src set 11.11.11.11 retain 65535 munge \
ip src set 22.22.22.22 retain
4294901760 pipe \
csum ip and tcp pipe \
mirred egress redirect dev netdev
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:25 +0000 (16:52 -0700)]
nfp: flower: use offsets provided by pedit instead of index for ipv6
Previously when populating the set ipv6 address action, we incorrectly
made use of pedit's key index to determine which 32bit word should be
set. We now calculate which word has been selected based on the offset
provided by the pedit action.
Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:24 +0000 (16:52 -0700)]
nfp: flower: fix multiple keys per pedit action
Previously we only allowed a single header key per pedit action to
change the header. This used to result in the last header key in the
pedit action to overwrite previous headers. We now keep track of them
and allow multiple header keys per pedit action.
Fixes: c0b1bd9a8b8a ("nfp: add set ipv4 header action flower offload")
Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address")
Fixes: f8b7b0a6b113 ("nfp: add set tcp and udp header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:23 +0000 (16:52 -0700)]
nfp: flower: fix pedit set actions for multiple partial masks
Previously we did not correctly change headers when using multiple
pedit actions with partial masks. We now take this into account and
no longer just commit the last pedit action.
Fixes: c0b1bd9a8b8a ("nfp: add set ipv4 header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Mon, 15 Oct 2018 21:37:21 +0000 (22:37 +0100)]
rxrpc: Fix a missing rxrpc_put_peer() in the error_report handler
Fix a missing call to rxrpc_put_peer() on the main path through the
rxrpc_error_report() function. This manifests itself as a ref leak
whenever an ICMP packet or other error comes in.
In commit
f334430316e7, the hand-off of the ref to a work item was removed
and was not replaced with a put.
Fixes: f334430316e7 ("rxrpc: Fix error distribution")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 15 Oct 2018 11:58:29 +0000 (19:58 +0800)]
sctp: use the pmtu from the icmp packet to update transport pathmtu
Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.
The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.
Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.
Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Mon, 15 Oct 2018 05:19:00 +0000 (05:19 +0000)]
net: fec: don't dump RX FIFO register when not available
Commit
db65f35f50e0 ("net: fec: add support of ethtool get_regs") introduce
ethool "--register-dump" interface to dump all FEC registers.
But not all silicon implementations of the Freescale FEC hardware module
have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start
Register) register, so we should not be trying to dump them on those that
don't.
To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before
dump those RX FIFO registers.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Sat, 13 Oct 2018 15:48:25 +0000 (16:48 +0100)]
qed: fix spelling mistake "Ireelevant" -> "Irrelevant"
Trivial fix to spelling mistake in DP_INFO message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 13 Oct 2018 01:58:53 +0000 (18:58 -0700)]
ipv6: mcast: fix a use-after-free in inet6_mc_check
syzbot found a use-after-free in inet6_mc_check [1]
The problem here is that inet6_mc_check() uses rcu
and read_lock(&iml->sflock)
So the fact that ip6_mc_leave_src() is called under RTNL
and the socket lock does not help us, we need to acquire
iml->sflock in write mode.
In the future, we should convert all this stuff to RCU.
[1]
BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline]
BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
Read of size 8 at addr
ffff8801ce7f2510 by task syz-executor0/22432
CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
ipv6_addr_equal include/net/ipv6.h:521 [inline]
inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
__raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98
ipv6_raw_deliver net/ipv6/raw.c:183 [inline]
raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240
ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426
ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126
napi_frags_finish net/core/dev.c:5664 [inline]
napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737
tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968
call_write_iter include/linux/fs.h:1808 [inline]
do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680
do_iter_write+0x185/0x5f0 fs/read_write.c:959
vfs_writev+0x1f1/0x360 fs/read_write.c:1004
do_writev+0x11a/0x310 fs/read_write.c:1039
__do_sys_writev fs/read_write.c:1112 [inline]
__se_sys_writev fs/read_write.c:1109 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457421
Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:
00007f2d30ecaba0 EFLAGS:
00000293 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
000000000000003e RCX:
0000000000457421
RDX:
0000000000000001 RSI:
00007f2d30ecabf0 RDI:
00000000000000f0
RBP:
0000000020000500 R08:
00000000000000f0 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000293 R12:
00007f2d30ecb6d4
R13:
00000000004c4890 R14:
00000000004d7b90 R15:
00000000ffffffff
Allocated by task 22437:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3718 [inline]
__kmalloc+0x14e/0x760 mm/slab.c:3727
kmalloc include/linux/slab.h:518 [inline]
sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983
ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427
do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743
ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933
rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069
sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038
__sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902
__do_sys_setsockopt net/socket.c:1913 [inline]
__se_sys_setsockopt net/socket.c:1910 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 22430:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3813
__sock_kfree_s net/core/sock.c:2004 [inline]
sock_kfree_s+0x29/0x60 net/core/sock.c:2010
ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448
__ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310
ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328
inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452
__sock_release+0xd7/0x250 net/socket.c:579
sock_close+0x19/0x20 net/socket.c:1141
__fput+0x385/0xa30 fs/file_table.c:278
____fput+0x15/0x20 fs/file_table.c:309
task_work_run+0x1e8/0x2a0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:193 [inline]
exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8801ce7f2500
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [
ffff8801ce7f2500,
ffff8801ce7f25c0)
The buggy address belongs to the page:
page:
ffffea000739fc80 count:1 mapcount:0 mapping:
ffff8801da800040 index:0x0
flags: 0x2fffc0000000100(slab)
raw:
02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040
raw:
0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>
ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tung Nguyen [Fri, 12 Oct 2018 20:46:55 +0000 (22:46 +0200)]
tipc: fix unsafe rcu locking when accessing publication list
The binding table's 'cluster_scope' list is rcu protected to handle
races between threads changing the list and those traversing the list at
the same moment. We have now found that the function named_distribute()
uses the regular list_for_each() macro to traverse the said list.
Likewise, the function tipc_named_withdraw() is removing items from the
same list using the regular list_del() call. When these two functions
execute in parallel we see occasional crashes.
This commit fixes this by adding the missing _rcu() suffixes.
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Fri, 12 Oct 2018 15:38:36 +0000 (16:38 +0100)]
rxrpc: Fix incorrect conditional on IPV6
The udpv6_encap_enable() function is part of the ipv6 code, and if that is
configured as a loadable module and rxrpc is built in then a build failure
will occur because the conditional check is wrong:
net/rxrpc/local_object.o: In function `rxrpc_lookup_local':
local_object.c:(.text+0x2688): undefined reference to `udpv6_encap_enable'
Use the correct config symbol (CONFIG_AF_RXRPC_IPV6) in the conditional
check rather than CONFIG_IPV6 as that will do the right thing.
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Reported-by: kbuild-all@01.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Fri, 12 Oct 2018 14:22:47 +0000 (16:22 +0200)]
ipv6: rate-limit probes for neighbourless routes
When commit
270972554c91 ("[IPV6]: ROUTE: Add Router Reachability
Probing (RFC4191).") introduced router probing, the rt6_probe() function
required that a neighbour entry existed. This neighbour entry is used to
record the timestamp of the last probe via the ->updated field.
Later, commit
2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().")
removed the requirement for a neighbour entry. Neighbourless routes skip
the interval check and are not rate-limited.
This patch adds rate-limiting for neighbourless routes, by recording the
timestamp of the last probe in the fib6_info itself.
Fixes: 2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 11 Oct 2018 22:06:33 +0000 (15:06 -0700)]
net: bcmgenet: Poll internal PHY for GENETv5
On GENETv5, there is a hardware issue which prevents the GENET hardware
from generating a link UP interrupt when the link is operating at
10Mbits/sec. Since we do not have any way to configure the link
detection logic, fallback to polling in that case.
Fixes: 421380856d9c ("net: bcmgenet: add support for the GENETv5 hardware")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 11 Oct 2018 21:32:39 +0000 (22:32 +0100)]
rxrpc: use correct kvec num when sending BUSY response packet
Fixes gcc '-Wunused-but-set-variable' warning:
net/rxrpc/output.c: In function 'rxrpc_reject_packets':
net/rxrpc/output.c:527:11: warning:
variable 'ioc' set but not used [-Wunused-but-set-variable]
'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response
packet.
Fixes: ece64fec164f ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 11 Oct 2018 21:32:31 +0000 (22:32 +0100)]
rxrpc: Fix an uninitialised variable
Fix an uninitialised variable introduced by the last patch. This can cause
a crash when a new call comes in to a local service, such as when an AFS
fileserver calls back to the local cache manager.
Fixes: c1e15b4944c9 ("rxrpc: Fix the packet reception routine")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Thu, 11 Oct 2018 20:02:29 +0000 (22:02 +0200)]
tipc: initialize broadcast link stale counter correctly
In the commit referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
unicast links to the affected node.
Unfortunately, this 'improvement' introduced two bugs, which each and
one alone cause only limited problems, but combined lead to seemingly
stochastic unicast link resets, depending on the amount of broadcast
traffic transmitted.
The first issue, a missing initialization of the 'tolerance' field of
the receiver broadcast link, was recently fixed by commit
047491ea334a
("tipc: set link tolerance correctly in broadcast link").
Ths second issue, where we omit to reset the 'stale_cnt' field of
the same link after a 'stale' period is over, leads to this counter
accumulating over time, and in the absence of the 'tolerance' criteria
leads to the above described symptoms. This commit adds the missing
initialization.
Fixes: a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 11 Oct 2018 18:15:13 +0000 (11:15 -0700)]
llc: set SOCK_RCU_FREE in llc_sap_add_socket()
WHen an llc sock is added into the sk_laddr_hash of an llc_sap,
it is not marked with SOCK_RCU_FREE.
This causes that the sock could be freed while it is still being
read by __llc_lookup_established() with RCU read lock. sock is
refcounted, but with RCU read lock, nothing prevents the readers
getting a zero refcnt.
Fix it by setting SOCK_RCU_FREE in llc_sap_add_socket().
Reported-by: syzbot+11e05f04c15e03be5254@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Oct 2018 04:51:28 +0000 (21:51 -0700)]
Merge tag 'mlx5-fixes-2018-10-10' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-10-10
This pull request includes some fixes to mlx5 driver,
Please pull and let me know if there's any problem.
For -stable v4.11:
('net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type')
For -stable v4.17:
('net/mlx5: Fix memory leak when setting fpga ipsec caps')
For -stable v4.18:
('net/mlx5: WQ, fixes for fragmented WQ buffers API')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Wed, 10 Oct 2018 20:00:58 +0000 (22:00 +0200)]
net/sched: cls_api: add missing validation of netlink attributes
Similarly to what has been done in
8b4c3cdd9dd8 ("net: sched: Add policy
validation for tc attributes"), fix classifier code to add validation of
TCA_CHAIN and TCA_KIND netlink attributes.
tested with:
# ./tdc.py -c filter
v2: Let sch_api and cls_api share nla_policy they have in common, thanks
to David Ahern.
v3: Avoid EXPORT_SYMBOL(), as validation of those attributes is not done
by TC modules, thanks to Cong Wang.
While at it, restore the 'Delete / get qdisc' comment to its orginal
position, just above tc_get_qdisc() function prototype.
Fixes: 5bc1701881e39 ("net: sched: introduce multichain support for filters")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Mon, 8 Oct 2018 15:49:35 +0000 (10:49 -0500)]
ethtool: fix a privilege escalation bug
In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the
use-space buffer 'useraddr' and checked to see whether it is
ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from
the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next,
according to 'sub_cmd', a permission check is enforced through the function
ns_capable(). For example, the permission check is required if 'sub_cmd' is
ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is
ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be
done by anyone". The following execution invokes different handlers
according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE,
ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel
object 'per_queue_opt' is copied again from the user-space buffer
'useraddr' and 'per_queue_opt.sub_command' is used to determine which
operation should be performed. Given that the buffer 'useraddr' is in the
user space, a malicious user can race to change the sub-command between the
two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and
ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then
before ethtool_set_per_queue() is called, the attacker changes
ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can
bypass the permission check and execute ETHTOOL_SCOALESCE.
This patch enforces a check in ethtool_set_per_queue() after the second
copy from 'useraddr'. If the sub-command is different from the one obtained
in the first copy in dev_ethtool(), an error code EINVAL will be returned.
Fixes: f38d138a7da6 ("net/ethtool: support set coalesce per queue")
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Tue, 9 Oct 2018 13:15:38 +0000 (08:15 -0500)]
ethtool: fix a missing-check bug
In ethtool_get_rxnfc(), the eth command 'cmd' is compared against
'ETHTOOL_GRXFH' to see whether it is necessary to adjust the variable
'info_size'. Then the whole structure of 'info' is copied from the
user-space buffer 'useraddr' with 'info_size' bytes. In the following
execution, 'info' may be copied again from the buffer 'useraddr' depending
on the 'cmd' and the 'info.flow_type'. However, after these two copies,
there is no check between 'cmd' and 'info.cmd'. In fact, 'cmd' is also
copied from the buffer 'useraddr' in dev_ethtool(), which is the caller
function of ethtool_get_rxnfc(). Given that 'useraddr' is in the user
space, a malicious user can race to change the eth command in the buffer
between these copies. By doing so, the attacker can supply inconsistent
data and cause undefined behavior because in the following execution 'info'
will be passed to ops->get_rxnfc().
This patch adds a necessary check on 'info.cmd' and 'cmd' to confirm that
they are still same after the two copies in ethtool_get_rxnfc(). Otherwise,
an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian-Hong Pan [Thu, 27 Sep 2018 04:09:48 +0000 (12:09 +0800)]
r8169: Enable MSI-X on RTL8106e
Originally, we have an issue where r8169 MSI-X interrupt is broken after
S3 suspend/resume on RTL8106e of ASUS X441UAR.
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at
ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at
e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: r8169
Kernel modules: r8169
We found the all of the values in PCI BAR=4 of the ethernet adapter
become 0xFF after system resumes. That breaks the MSI-X interrupt.
Therefore, we can only fall back to MSI interrupt to fix the issue at
that time.
However, there is a commit which resolves the drivers getting nothing in
PCI BAR=4 after system resumes. It is
04cb3ae895d7 "PCI: Reprogram
bridge prefetch registers on resume" by Daniel Drake.
After apply the patch, the ethernet adapter works fine before suspend
and after resume. So, we can revert the workaround after the commit
"PCI: Reprogram bridge prefetch registers on resume" is merged into main
tree.
This patch reverts commit
7bb05b85bc2d1a1b647b91424b2ed4a18e6ecd81
"r8169: don't use MSI-X on RTL8106e".
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201181
Fixes: 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Oct 2018 01:32:54 +0000 (18:32 -0700)]
Revert "sparc: Convert to using %pOFn instead of device_node.name"
This reverts commit
0b9871a3a8cc7234c285b5d9bf66cc6712cfee7c.
Causes crashes with qemu, interacts badly with commit commit
6d0a70a284be ("vsprintf: print OF node name using full_name")
etc.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Wilcox [Mon, 15 Oct 2018 20:28:21 +0000 (16:28 -0400)]
idr: Change documentation license
This documentation was inadvertently released under the CC-BY-SA-4.0
license. It was intended to be released under GPL-2.0 or later.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Matthew Wilcox [Mon, 15 Oct 2018 20:23:08 +0000 (16:23 -0400)]
test_ida: Fix lockdep warning
The IDA was declared on the stack instead of statically, so lockdep
triggered a warning that it was improperly initialised.
Reported-by: 0day bot
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Mikhail Nikiforov [Mon, 15 Oct 2018 18:17:56 +0000 (11:17 -0700)]
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.
Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Howells [Mon, 15 Oct 2018 11:43:02 +0000 (12:43 +0100)]
afs: Fix clearance of reply
The recent patch to fix the afs_server struct leak didn't actually fix the
bug, but rather fixed some of the symptoms. The problem is that an
asynchronous call that holds a resource pointed to by call->reply[0] will
find the pointer cleared in the call destructor, thereby preventing the
resource from being cleaned up.
In the case of the server record leak, the afs_fs_get_capabilities()
function in devel code sets up a call with reply[0] pointing at the server
record that should be altered when the result is obtained, but this was
being cleared before the destructor was called, so the put in the
destructor does nothing and the record is leaked.
Commit
f014ffb025c1 removed the additional ref obtained by
afs_install_server(), but the removal of this ref is actually used by the
garbage collector to mark a server record as being defunct after the record
has expired through lack of use.
The offending clearance of call->reply[0] upon completion in
afs_process_async_call() has been there from the origin of the code, but
none of the asynchronous calls actually use that pointer currently, so it
should be safe to remove (note that synchronous calls don't involve this
function).
Fix this by the following means:
(1) Revert commit
f014ffb025c1.
(2) Remove the clearance of reply[0] from afs_process_async_call().
Without this, afs_manage_servers() will suffer an assertion failure if it
sees a server record that didn't get used because the usage count is not 1.
Fixes: f014ffb025c1 ("afs: Fix afs_server struct leak")
Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 15 Oct 2018 05:20:24 +0000 (07:20 +0200)]
Linux 4.19-rc8
David S. Miller [Mon, 15 Oct 2018 03:22:28 +0000 (20:22 -0700)]
sparc64: Set %l4 properly on trap return after handling signals.
If we did some signal processing, we have to reload the pt_regs
tstate register because it's value may have changed.
In doing so we also have to extract the %pil value contained in there
anre load that into %l4.
This value is at bit 20 and thus needs to be shifted down before we
later write it into the %pil register.
Most of the time this is harmless as we are returning to userspace
and the %pil is zero for that case.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Oct 2018 03:19:31 +0000 (20:19 -0700)]
sparc64: Make proc_id signed.
So that when it is unset, ie. '-1', userspace can see it
properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 14 Oct 2018 20:01:20 +0000 (13:01 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-14
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix xsk map update and delete operation to not call synchronize_net()
but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
allowed to sleep under RCU, from Björn.
2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
already has unlimited RLIMIT_MEMLOCK, from Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Sat, 13 Oct 2018 01:07:14 +0000 (18:07 -0700)]
x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS
When compiling the kernel with Clang, this warning appears even though
it is disabled for the whole kernel because this folder has its own set
of KBUILD_CFLAGS. It was disabled before the beginning of git history.
In file included from arch/x86/boot/compressed/kaslr.c:29:
In file included from arch/x86/boot/compressed/misc.h:21:
In file included from ./include/linux/elf.h:5:
In file included from ./arch/x86/include/asm/elf.h:77:
In file included from ./arch/x86/include/asm/vdso.h:11:
In file included from ./include/linux/mm_types.h:9:
In file included from ./include/linux/spinlock.h:88:
In file included from ./arch/x86/include/asm/spinlock.h:43:
In file included from ./arch/x86/include/asm/qrwlock.h:6:
./include/asm-generic/qrwlock.h:101:53: warning: passing 'u32 *' (aka
'unsigned int *') to parameter of type 'int *' converts between pointers
to integer types with different sign [-Wpointer-sign]
if (likely(atomic_try_cmpxchg_acquire(&lock->cnts, &cnts, _QW_LOCKED)))
^~~~~
./include/linux/compiler.h:76:40: note: expanded from macro 'likely'
# define likely(x) __builtin_expect(!!(x), 1)
^
./include/asm-generic/atomic-instrumented.h:69:66: note: passing
argument to parameter 'old' here
static __always_inline bool atomic_try_cmpxchg(atomic_t *v, int *old, int new)
^
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20181013010713.6999-1-natechancellor@gmail.com
Nathan Chancellor [Sat, 13 Oct 2018 00:53:12 +0000 (17:53 -0700)]
x86/time: Correct the attribute on jiffies' definition
Clang warns that the declaration of jiffies in include/linux/jiffies.h
doesn't match the definition in arch/x86/time/kernel.c:
arch/x86/kernel/time.c:29:42: warning: section does not match previous declaration [-Wsection]
__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
^
./include/linux/cache.h:49:4: note: expanded from macro '__cacheline_aligned'
__section__(".data..cacheline_aligned")))
^
./include/linux/jiffies.h:81:31: note: previous attribute is here
extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
^
./arch/x86/include/asm/cache.h:20:2: note: expanded from macro '__cacheline_aligned_in_smp'
__page_aligned_data
^
./include/linux/linkage.h:39:29: note: expanded from macro '__page_aligned_data'
#define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE)
^
./include/linux/compiler_attributes.h:233:56: note: expanded from macro '__section'
#define __section(S) __attribute__((__section__(#S)))
^
1 warning generated.
The declaration was changed in commit
7c30f352c852 ("jiffies.h: declare
jiffies and jiffies_64 with ____cacheline_aligned_in_smp") but wasn't
updated here. Make them match so Clang no longer warns.
Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181013005311.28617-1-natechancellor@gmail.com
Dave Hansen [Fri, 12 Oct 2018 23:21:18 +0000 (16:21 -0700)]
x86/entry: Add some paranoid entry/exit CR3 handling comments
Andi Kleen was just asking me about the NMI CR3 handling and why
we restore it unconditionally. I was *sure* we had documented it
well. We did not.
Add some documentation. We have common entry code where the CR3
value is stashed, but three places in two big code paths where we
restore it. I put bulk of the comments in this common path and
then refer to it from the other spots.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Cc: bp@alien8.de
Cc: "H. Peter Anvin" <hpa@zytor.come
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20181012232118.3EAAE77B@viggo.jf.intel.com
Peter Zijlstra [Thu, 11 Oct 2018 10:38:27 +0000 (12:38 +0200)]
x86/percpu: Fix this_cpu_read()
Eric reported that a sequence count loop using this_cpu_read() got
optimized out. This is wrong, this_cpu_read() must imply READ_ONCE()
because the interface is IRQ-safe, therefore an interrupt can have
changed the per-cpu value.
Fixes: 7c3576d261ce ("[PATCH] i386: Convert PDA into the percpu section")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: hpa@zytor.com
Cc: eric.dumazet@gmail.com
Cc: bp@alien8.de
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181011104019.748208519@infradead.org
Peter Zijlstra [Thu, 11 Oct 2018 10:38:26 +0000 (12:38 +0200)]
x86/tsc: Force inlining of cyc2ns bits
Looking at the asm for native_sched_clock() I noticed we don't inline
enough. Mostly caused by sharing code with cyc2ns_read_begin(), which
we didn't used to do. So mark all that __force_inline to make it DTRT.
Fixes: 59eaef78bfea ("x86/tsc: Remodel cyc2ns to use seqcount_latch()")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: eric.dumazet@gmail.com
Cc: bp@alien8.de
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181011104019.695196158@infradead.org
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:34:31 +0000 (08:34 +0200)]
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git./linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax 4.19-rc8
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of
a mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
mprotect() clears this flag that is needed to communicate the
liveness of device pages to the get_user_pages() path."
* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: Preserve _PAGE_DEVMAP across mprotect() calls
filesystem-dax: Fix dax_layout_busy_page() livelock
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:33:35 +0000 (08:33 +0200)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Wolfram writes:
"i2c fix for 4.19:
I2C has one documentation bugfix for something we changed during the
v4.19 cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Fix kerneldoc for renamed i2c dma put function
Greg Kroah-Hartman [Sat, 13 Oct 2018 13:11:15 +0000 (15:11 +0200)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Paolo writes:
"KVM fixes for 4.19-rc8
Leftover bugfixes."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
ARM: KVM: Correctly order SGI register entries in the cp15 array
Vitaly Kuznetsov [Thu, 11 Oct 2018 10:03:12 +0000 (12:03 +0200)]
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit
877ad952be3d ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:
"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"
So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().
Fixes: 877ad952be3d ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Weinberger [Sat, 13 Oct 2018 08:18:41 +0000 (10:18 +0200)]
ubifs: Fix WARN_ON logic in exit path
ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd382d ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:31:19 +0000 (09:31 +0200)]
Merge branch 'akpm'
Fixes from Andrew:
* akpm:
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
ocfs2: fix a GCC warning
Khazhismel Kumykov [Sat, 13 Oct 2018 04:34:40 +0000 (21:34 -0700)]
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.
Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Glisse [Sat, 13 Oct 2018 04:34:36 +0000 (21:34 -0700)]
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()
So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).
Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Sat, 13 Oct 2018 04:34:32 +0000 (21:34 -0700)]
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash. The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region. It does not bail out if the
VMA only overlaps another part of the requested region.
Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.
Test case:
user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif
int main(void) {
char *p;
errno = 0;
p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p1=%p err=%m\n", p);
errno = 0;
p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p2=%p err=%m\n", p);
char cmd[100];
sprintf(cmd, "cat /proc/%d/maps", getpid());
system(cmd);
return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-
10002000 r--p
00000000 00:00 0
10002000-
10005000 ---p
00000000 00:00 0
564a9a06f000-
564a9a070000 r-xp
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a26f000-
564a9a270000 r--p
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a270000-
564a9a271000 rw-p
00001000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a54a000-
564a9a56b000 rw-p
00000000 00:00 0 [heap]
7f8eba447000-
7f8eba5dc000 r-xp
00000000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-
7f8eba7dc000 ---p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-
7f8eba7e0000 r--p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-
7f8eba7e2000 rw-p
00199000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-
7f8eba7e6000 rw-p
00000000 00:00 0
7f8eba7e6000-
7f8eba809000 r-xp
00000000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-
7f8eba9eb000 rw-p
00000000 00:00 0
7f8ebaa06000-
7f8ebaa09000 rw-p
00000000 00:00 0
7f8ebaa09000-
7f8ebaa0a000 r--p
00023000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-
7f8ebaa0b000 rw-p
00024000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-
7f8ebaa0c000 rw-p
00000000 00:00 0
7ffcc99fa000-
7ffcc9a1b000 rw-p
00000000 00:00 0 [stack]
7ffcc9b44000-
7ffcc9b47000 r--p
00000000 00:00 0 [vvar]
7ffcc9b47000-
7ffcc9b49000 r-xp
00000000 00:00 0 [vdso]
ffffffffff600000-
ffffffffff601000 r-xp
00000000 00:00 0
[vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$
As you can see, the first page of the mapping at 0x10001000 was clobbered.
Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes: a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhong jiang [Sat, 13 Oct 2018 04:34:26 +0000 (21:34 -0700)]
ocfs2: fix a GCC warning
Fix the following compile warning:
fs/ocfs2/dlmglue.c:99:30: warning:
\91lockdep_keys
\92 defined but not used [-Wunused-variable]
static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];
Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:07:23 +0000 (09:07 +0200)]
Merge tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block
Jens writes:
"block fix for 4.19-rc
Just a single fix that should go in, fixing a regression introduced
in the blk-wbt code."
* tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block:
blk-wbt: wake up all when we scale up, not down
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:06:27 +0000 (09:06 +0200)]
Merge tag 'gfs2-4.19.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Andreas writes:
"gfs2 4.19 fixes
Fix iomap buffered write support for journaled files"
* tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix iomap buffered write support for journaled files (2)
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:05:37 +0000 (09:05 +0200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Will writes:
"More arm64 fixes
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Reject stand-alone CHAIN events for PMUv3
arm64: Fix /proc/iomem for reserved but not memory regions
David S. Miller [Fri, 12 Oct 2018 17:33:20 +0000 (10:33 -0700)]
sparc: Throttle perf events properly.
Like x86 and arm, call perf_sample_event_took() in perf event
NMI interrupt handler.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Oct 2018 17:31:58 +0000 (10:31 -0700)]
sparc: Fix single-pcr perf event counter management.
It is important to clear the hw->state value for non-stopped events
when they are added into the PMU. Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set. This breaks 'perf stat' and similar use cases, causing all the
events to show zero.
This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value. So we have to add explicit
hw->state handling there.
Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.
Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Fri, 12 Oct 2018 15:41:27 +0000 (17:41 +0200)]
Merge tag 'armsoc-fixes-4.19' of git://git./linux/kernel/git/arm/arm-soc
Arnd writes:
"ARM: SoC fixes for 4.19
Two last minute bugfixes, both for NXP platforms:
* The Layerscape 'qbman' infrastructure suffers from probe ordering
bugs in some configurations, a two-patch series adds a hotfix for
this. 4.20 will have a longer set of patches to rework it.
* The old imx53-qsb board regressed in 4.19 after the addition
of cpufreq support, adding a set of explicit operating points
fixes this."
* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: fsl: qman_portals: defer probe after qman's probe
soc: fsl: qbman: add APIs to retrieve the probing status
ARM: dts: imx53-qsb: disable 1.2GHz OPP
David Howells [Fri, 12 Oct 2018 13:00:57 +0000 (14:00 +0100)]
afs: Fix afs_server struct leak
Fix a leak of afs_server structs. The routine that installs them in the
various lookup lists and trees gets a ref on leaving the function, whether
it added the server or a server already exists. It shouldn't increment
the refcount if it added the server.
The effect of this that "rmmod kafs" will hang waiting for the leaked
server to become unused.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Rosin [Fri, 12 Oct 2018 14:46:46 +0000 (14:46 +0000)]
MAINTAINERS: use the correct location for dt-bindings includes for mux
Just drop the "linux" part of the path, it was never correct.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 256ac0375098 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Rosin [Fri, 12 Oct 2018 14:46:40 +0000 (14:46 +0000)]
mux: adgs1408: use the correct MODULE_LICENSE
The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Wed, 10 Oct 2018 20:18:18 +0000 (21:18 +0100)]
gfs2: Fix iomap buffered write support for journaled files (2)
It turns out that the fix in commit
6636c3cc56 is bad; the assertion
that the iomap code no longer creates buffer heads is incorrect for
filesystems that set the IOMAP_F_BUFFER_HEAD flag.
Instead, what's happening is that gfs2_iomap_begin_write treats all
files that have the jdata flag set as journaled files, which is
incorrect as long as those files are inline ("stuffed"). We're handling
stuffed files directly via the page cache, which is why we ended up with
pages without buffer heads in gfs2_page_add_databufs.
Fix this by handling stuffed journaled files correctly in
gfs2_iomap_begin_write.
This reverts commit
6636c3cc5690c11631e6366cf9a28fb99c8b25bb.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Will Deacon [Fri, 5 Oct 2018 12:24:36 +0000 (13:24 +0100)]
arm64: perf: Reject stand-alone CHAIN events for PMUv3
It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.
Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 11 Oct 2018 10:29:14 +0000 (11:29 +0100)]
arm64: Fix /proc/iomem for reserved but not memory regions
We describe ranges of 'reserved' memory to userspace via /proc/iomem.
Commit
50d7ba36b916 ("arm64: export memblock_reserve()d regions via
/proc/iomem") updated the logic to export regions that were reserved
because their contents should be preserved. This allowed kexec-tools
to tell the difference between 'reserved' memory that must be
preserved and not overwritten, (e.g. the ACPI tables), and 'nomap'
memory that must not be touched without knowing the memory-attributes
(e.g. RAS CPER regions).
The above commit wrongly assumed that memblock_reserve() would not
be used to reserve regions that aren't memory. It turns out this is
exactly what early_init_dt_reserve_memory_arch() will do if it finds
a DT reserved-memory that was also carved out of the memory node, which
results in a WARN_ON_ONCE() and the region being reserved instead of
ignored. The ramoops description on hikey and dragonboard-410c both do
this, so we can't simply write this configuration off as "buggy firmware".
Avoid this issue by rewriting reserve_memblock_reserved_regions() so
that only the portions of reserved regions which overlap with mapped
memory are actually reserved.
Fixes: 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Paolo Pisati <p.pisati@gmail.com>
CC: Akashi Takahiro <takahiro.akashi@linaro.org>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
David Howells [Thu, 11 Oct 2018 21:45:49 +0000 (22:45 +0100)]
afs: Fix cell proc list
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:57:05 +0000 (12:57 +0200)]
Merge tag 'mmc-v4.19-rc7' of git://git./linux/kernel/git/ulfh/mmc
Ulf writes:
"MMC core:
- Avoid fragile multiblock reads for the last sector in SPI mode
WIFI/SDIO:
- libertas: Fixup suspend sequence for the SDIO card"
* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
libertas: call into generic suspend code before turning off power
mmc: block: avoid multiblock reads for the last sector in SPI mode
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:56:25 +0000 (12:56 +0200)]
Merge tag 'gpio-v4.19-4' of git://git./linux/kernel/git/linusw/linux-gpio
Linus writes:
"GPIO fix for the v4.19 series:
- Fix up the interrupt parent for the irqdomains."
* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Assign gpio_irq_chip::parents to non-stack pointer
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:55:47 +0000 (12:55 +0200)]
Merge tag 'pinctrl-v4.19-5' of git://git./linux/kernel/git/linusw/linux-pinctrl
Linus writes:
"pin control fix for v4.19:
A single pin control fix for v4.19:
- Interrupt setup in the MCP23S08 driver."
* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: fix irq and irqchip setup order
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:54:26 +0000 (12:54 +0200)]
Merge tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd
Boris writes:
"mdt: fix for 4.19-rc8
* Fix a stack overflow in lib/bch.c"
* tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd:
lib/bch: fix possible stack overrun
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:53:48 +0000 (12:53 +0200)]
Merge tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19-rc8
single nouveau runtime reference and mst change"
* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:53:06 +0000 (12:53 +0200)]
Merge tag 'for-gkh' of git://git./linux/kernel/git/rdma/rdma
Doug writes:
"RDMA fixes:
Final for-rc pull request for 4.19
We only have one bug to submit this time around. It fixes a DMA
unmap issue where we unmapped the DMA address from the IOMMU before
we did from the card, resulting in a DMAR error with IOMMU enabled,
or possible crash without."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Unmap DMA addr from HCA before IOMMU
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:35:02 +0000 (12:35 +0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for v4.19-rc7
- we added a few scheduling points into various input interfaces to
ensure that large writes will not cause RCU stalls
- fixed configuring PS/2 keyboards as wakeup devices on newer
platforms
- added a new Xbox gamepad ID."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - add a schedule point in uinput_inject_events()
Input: evdev - add a schedule point in evdev_write()
Input: mousedev - add a schedule point in mousedev_write()
Input: i8042 - enable keyboard wakeups by default when s2idle is used
Input: xpad - add support for Xbox1 PDP Camo series gamepad