sfrench/cifs-2.6.git
4 years agobtrfs: send: remove unused code
Nikolay Borisov [Mon, 16 Oct 2017 13:29:23 +0000 (16:29 +0300)]
btrfs: send: remove unused code

This code was first introduced in 31db9f7c23fb ("Btrfs: introduce
BTRFS_IOC_SEND for btrfs send/receive") and it was not functional, then
it got slightly refactored in e938c8ad543c ("Btrfs: code cleanups for
send/receive"), alas it was still dead. So let's remove it for good!

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove BUG_ON in btrfs_rm_dev_replace_free_srcdev()
Anand Jain [Mon, 16 Oct 2017 22:53:50 +0000 (06:53 +0800)]
btrfs: remove BUG_ON in btrfs_rm_dev_replace_free_srcdev()

That was only an extra check to tackle a few bugs around this area, now
its safe to remove it.  Replace it by an ASSERT.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: allow setting zlib compression level via :9
Adam Borowski [Fri, 15 Sep 2017 15:36:58 +0000 (17:36 +0200)]
btrfs: allow setting zlib compression level via :9

This is bikeshedding, but it seems people are drastically more likely to
understand "zlib:9" as compression level rather than an algorithm
version compared to "zlib9".

Based on feedback on the mailinglist, the ":9" will be the only accepted
syntax. The level must be a single digit. Unrecognized format will
result to the default, for forward compatibility in a similar way the
compression algorithm specifier was relaxed in commit
a7164fa4e055daf6368c ("btrfs: prepare for extensions in compression
options").

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
[ tighten the accepted format ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: allow to set compression level for zlib
David Sterba [Fri, 15 Sep 2017 15:36:57 +0000 (17:36 +0200)]
btrfs: allow to set compression level for zlib

Preliminary support for setting compression level for zlib, the
following works:

$ mount -o compess=zlib                 # default
$ mount -o compess=zlib0                # same
$ mount -o compess=zlib9                # level 9, slower sync, less data
$ mount -o compess=zlib1                # level 1, faster sync, more data
$ mount -o remount,compress=zlib3 # level set by remount

The compress-force works the same as compress'.  The level is visible in
the same format in /proc/mounts. Level set via file property does not
work yet.

Required patch: "btrfs: prepare for extensions in compression options"

Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Replace opencoded sizes with their symbolic constants
Nikolay Borisov [Mon, 16 Oct 2017 13:48:40 +0000 (16:48 +0300)]
btrfs: Replace opencoded sizes with their symbolic constants

Currently btrfs' code uses a mix of opencoded sizes and defines from sizes.h.
Let's unifiy the code base to always use the symbolic constants. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Use bd_dev to generate index when dev_state_hashtable add items.
Gu JinXiang [Wed, 11 Oct 2017 08:44:27 +0000 (16:44 +0800)]
btrfs: Use bd_dev to generate index when dev_state_hashtable add items.

Fix missing change from commit f8f84b2dfda5
("btrfs: index check-integrity state hash by a dev_t").

Function btrfsic_dev_state_hashtable_lookup uses dev_t to generate hashval
when look in up a btrfsic_dev_state in hash table. So when we add a
btrfsic_dev_state into the hash table, it should also use dev_t.

Reproducer of this bug:
Use MOUNT_OPTIONS="-o check_int" when running xfstest, device can not be
mounted successfully. So xfstest can not run.

Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix false EIO for missing device
Anand Jain [Sat, 14 Oct 2017 00:34:02 +0000 (08:34 +0800)]
btrfs: fix false EIO for missing device

When one of the device is missing, bbio_error() takes care of setting
the error status. And if its only IO that is pending in that stripe, it
fails to check the status of the other IO at %bbio_error before setting
the error %bi_status for the %orig_bio. Fix this by checking if
%bbio->error has exceeded the %bbio->max_errors.

Reproducer as below fdatasync error is seen intermittently.

 mount -o degraded /dev/sdc /btrfs
 dd status=none if=/dev/zero of=$(mktemp /btrfs/XXX) bs=4096 count=1 conv=fdatasync

 dd: fdatasync failed for ‘/btrfs/LSe’: Input/output error

 The reason for the intermittences of the problem is because
 the following conditions have to be met, which depends on timing:
 In btrfs_map_bio()
  - the RAID1 the missing device has to be at %dev_nr = 1
 In bbio_error()
  . before bbio_error() is called the bio of the not-missing
    device at %dev_nr = 0 must be completed so that the below
    condition is true
     if (atomic_dec_and_test(&bbio->stripes_pending)) {

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: use need_full_stripe() in __btrfs_map_block()
Anand Jain [Thu, 12 Oct 2017 08:43:00 +0000 (16:43 +0800)]
btrfs: use need_full_stripe() in __btrfs_map_block()

A cleanup patch, use need_full_stripe() to replace the open code.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: cleanup extent locking sequence
Goldwyn Rodrigues [Mon, 16 Oct 2017 10:43:21 +0000 (05:43 -0500)]
btrfs: cleanup extent locking sequence

Code cleanup for better understanding:
Variable needs_unlock to be called extent_locked to show state as
opposed to action. Changed the type to int, to reduce code in the
critical path.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: use BLK_STS defines where needed
Anand Jain [Sat, 14 Oct 2017 00:35:56 +0000 (08:35 +0800)]
btrfs: use BLK_STS defines where needed

At few places we could use BLK_STS_OK and BLK_STS_NOSUPP.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Satoru Taekeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ dropped first hunk btrfs_endio_direct_read ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: add assertions for releasing trans handle reservations
Josef Bacik [Fri, 29 Sep 2017 19:44:05 +0000 (15:44 -0400)]
btrfs: add assertions for releasing trans handle reservations

These are useful for debugging problems where we mess with
trans->block_rsv to make sure we're not screwing something up.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove type argument from comp_tree_refs
Josef Bacik [Fri, 29 Sep 2017 19:43:58 +0000 (15:43 -0400)]
btrfs: remove type argument from comp_tree_refs

We can get this from the ref we've passed in.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove delayed_ref_node from ref_head
Josef Bacik [Fri, 29 Sep 2017 19:43:57 +0000 (15:43 -0400)]
btrfs: remove delayed_ref_node from ref_head

This is just excessive information in the ref_head, and makes the code
complicated.  It is a relic from when we had the heads and the refs in
the same tree, which is no longer the case.  With this removal I've
cleaned up a bunch of the cruft around this old assumption as well.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: move all ref head cleanup to the helper function
Josef Bacik [Fri, 29 Sep 2017 19:43:56 +0000 (15:43 -0400)]
btrfs: move all ref head cleanup to the helper function

We do a couple different cleanup operations on the ref head.  We adjust
counters, we'll free any reserved space if we didn't end up using the
ref, and we clear the pending csum bytes.  Move all these disparate
things into cleanup_ref_head and clean up the logic in
__btrfs_run_delayed_refs so that it handles the !ref case a lot cleaner,
as well as making run_one_delayed_ref() only deal with real refs and not
the ref head.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: move ref_mod modification into the if (ref) logic
Josef Bacik [Fri, 29 Sep 2017 19:43:55 +0000 (15:43 -0400)]
btrfs: move ref_mod modification into the if (ref) logic

We only use this logic if our ref isn't a ref_head, so move it up into
the if (ref) case since we know that this is a normal ref and not a
delayed ref head.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: breakout empty head cleanup to a helper
Josef Bacik [Fri, 29 Sep 2017 19:43:54 +0000 (15:43 -0400)]
btrfs: breakout empty head cleanup to a helper

Move this code out to a helper function to further simplivy
__btrfs_run_delayed_refs.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: move extent_op cleanup to a helper
Josef Bacik [Fri, 29 Sep 2017 19:43:53 +0000 (15:43 -0400)]
btrfs: move extent_op cleanup to a helper

Move the extent_op cleanup for an empty head ref to a helper function to
help simplify __btrfs_run_delayed_refs.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: add a helper to return a head ref
Josef Bacik [Fri, 29 Sep 2017 19:43:52 +0000 (15:43 -0400)]
btrfs: add a helper to return a head ref

Simplify the error handling in __btrfs_run_delayed_refs by breaking out
the code used to return a head back to the delayed_refs tree for
processing into a helper function.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: only check delayed ref usage in should_end_transaction
Josef Bacik [Fri, 29 Sep 2017 19:43:51 +0000 (15:43 -0400)]
Btrfs: only check delayed ref usage in should_end_transaction

We were only doing btrfs_check_space_for_delayed_refs() if the metadata
space was full, ie we couldn't allocate chunks.  This assumes we'll be
able to allocate chunks during transaction commit, but since nothing
does a LIMIT flush during the transaction commit this won't actually
happen unless we happen to run shy of actual space.  We already take
into account a full fs in btrfs_check_space_for_delayed_refs() so just
kill this extra check to make sure we're ending the transaction when we
need to.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: add a extent ref verify tool
Josef Bacik [Fri, 29 Sep 2017 19:43:50 +0000 (15:43 -0400)]
Btrfs: add a extent ref verify tool

We were having corruption issues that were tied back to problems with
the extent tree.  In order to track them down I built this tool to try
and find the culprit, which was pretty successful.  If you compile with
this tool on it will live verify every ref update that the fs makes and
make sure it is consistent and valid.  I've run this through with
xfstests and haven't gotten any false positives.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update error messages, add fixup from Dan Carpenter to handle errors
  of read_tree_block ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: pass root to various extent ref mod functions
Josef Bacik [Fri, 29 Sep 2017 19:43:49 +0000 (15:43 -0400)]
btrfs: pass root to various extent ref mod functions

We need the actual root for the ref verifier tool to work, so change
these functions to pass the root around instead.  This will be used in
a subsequent patch.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: add ref-verify mount option
Josef Bacik [Fri, 29 Sep 2017 19:43:48 +0000 (15:43 -0400)]
btrfs: add ref-verify mount option

This adds the infrastructure for turning ref verify on and off for a
mount, to be used by a later patch.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhnance btrfs_print_mod_info to print if ref-verify is compiled in ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: get rid of sector_t and use u64 offset in submit_extent_page
David Sterba [Wed, 4 Oct 2017 15:30:11 +0000 (17:30 +0200)]
btrfs: get rid of sector_t and use u64 offset in submit_extent_page

The use of sector_t in the callchain of submit_extent_page is not
necessary.  Switch to u64 and rename the variable and use byte units
instead of 512b, ie.  dropping the >> 9 shifts and avoiding the
con(tro)versions of sector_t.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: rename page offset parameter in submit_extent_page
David Sterba [Wed, 4 Oct 2017 15:10:34 +0000 (17:10 +0200)]
btrfs: rename page offset parameter in submit_extent_page

We're going to remove sector_t and will use 'offset', so this patch
frees the name.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: scrub: get rid of sector_t
David Sterba [Wed, 4 Oct 2017 15:07:07 +0000 (17:07 +0200)]
btrfs: scrub: get rid of sector_t

The use of sector_t is not necessry, it's just for a warning.  Switch to
u64 and rename the variable and use byte units instead of 512b, ie.
dropping the >> 9 shifts.  The messages are adjusted as well.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix send ioctl on 32bit with 64bit kernel
Josef Bacik [Wed, 27 Sep 2017 14:43:13 +0000 (10:43 -0400)]
btrfs: fix send ioctl on 32bit with 64bit kernel

We pass in a pointer in our send arg struct, this means the struct size
doesn't match with 32bit user space and 64bit kernel space.  Fix this by
adding a compat mode and doing the appropriate conversion.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move structure to the beginning, next to receive 32bit compat ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix use of error or warning for missing device
Anand Jain [Mon, 9 Oct 2017 03:07:46 +0000 (11:07 +0800)]
btrfs: fix use of error or warning for missing device

When device is missing without the -o degraded option then its an error
so report it as an error instead of a warning.  And when -o degraded
option is provided, log the missing device as warning.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch error to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: declare btrfs_report_missing_device() static
Anand Jain [Mon, 9 Oct 2017 03:07:45 +0000 (11:07 +0800)]
btrfs: declare btrfs_report_missing_device() static

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix EIO misuse to report missing degraded option
Anand Jain [Mon, 9 Oct 2017 03:07:44 +0000 (11:07 +0800)]
btrfs: fix EIO misuse to report missing degraded option

EIO is only for the IO failure to the device, avoid it. Use ENOENT as
that's the closest error code describing what happened.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: add_missing_dev() should return the actual error
Anand Jain [Wed, 11 Oct 2017 04:46:18 +0000 (12:46 +0800)]
btrfs: add_missing_dev() should return the actual error

add_missing_dev() can return device pointer so that IS_ERR/PTR_ERR can
be used to check for the actual error that occurred in the function.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
[ minor error message adjustment ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Clean up unused variables in free-space-tree.c
Christos Gkekas [Thu, 12 Oct 2017 21:40:42 +0000 (22:40 +0100)]
btrfs: Clean up unused variables in free-space-tree.c

Remove variables 'start' and 'end', which are set but never used.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tree-checker: use %zu format string for size_t
Arnd Bergmann [Fri, 13 Oct 2017 09:27:35 +0000 (11:27 +0200)]
btrfs: tree-checker: use %zu format string for size_t

We now get a harmless compile-time on 32-bit architectures:

fs/btrfs/tree-checker.c: In function 'check_extent_data_item':
fs/btrfs/tree-checker.c:189:70: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'unsigned int' [-Werror=format=]

This changes the format string to use %zu instead of %lu for size_t.

Fixes: c1f6520bf360 ("btrfs: tree-checker: Enhance output for check_extent_data_item")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: remove nr_async_submits and async_submit_draining
Liu Bo [Thu, 7 Sep 2017 17:22:22 +0000 (11:22 -0600)]
Btrfs: remove nr_async_submits and async_submit_draining

Now that we have the combo of flushing twice, which can make sure IO
have started since the second flush will wait for page lock which
won't be unlocked unless setting page writeback and queuing ordered
extents, we don't need %async_submit_draining, %async_delalloc_pages
and %nr_async_submits to tell whether the IO has actually started.

Moreover, all the flushers in use are followed by functions that wait
for ordered extents to complete, so %nr_async_submits, which tracks
whether bio's async submit has made progress, doesn't really make
sense.

However, %async_delalloc_pages is still required by shrink_delalloc()
as that function doesn't flush twice in the normal case (just issues a
writeback with WB_REASON_FS_FREE_SPACE).

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: do not make defrag wait on async_delalloc_pages
Liu Bo [Thu, 7 Sep 2017 17:22:21 +0000 (11:22 -0600)]
Btrfs: do not make defrag wait on async_delalloc_pages

By setting compression for a defrag task, the task will start IO at
the end of defrag.

After the combo of filemap_flush(), we've already made sure that
dirty pages have made progress via async compress thread because the
second filemap_flush() will wait for page lock, which won't be
unlocked until those pages have been marked as writeback and ordered
extents have been queued.

And this is for per-inode defrag, it's not helpful to wait on a global
%async_delalloc_pages and %nr_async_submits from fs_info.

Although waiting on %nr_async_submits means that all bios are
submitted down to per-device schedule IO lists, it doesn't wait for
their completions, thus users still need to do fsync/sync to make sure
the data is on disk.  While with this change, it makes sure that pages
are marked with writeback bits and will be submitted asynchronously
shortly, therefore, the behavior of defrag option '-c' remains unchanged.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: remove nr_async_bios
Liu Bo [Thu, 7 Sep 2017 17:22:20 +0000 (11:22 -0600)]
Btrfs: remove nr_async_bios

This was intended to congest higher layers to not send bios, but as

1) the congested bit has been taken by writeback

Async bios come from buffered writes and DIO writes.

For DIO writes, we want to submit them ASAP, while for buffered writes,
writeback uses balance_dirty_pages() to throttle how much dirty pages we
can have.

2) and no one is waiting for %nr_async_bios down to zero,

Historically, it was introduced along with changes which let
checksumming workload spread accross different cpus.  And at that time,
pdflush was used instead of per-bdi flushing, perhaps pdflush did not
have the necessary information for writeback to do throttling.

We can safely remove them now.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
[ additional explanation from mails, removed unused variable 'limit' ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tree-checker: Enhance output for check_extent_data_item
Qu Wenruo [Mon, 9 Oct 2017 01:51:06 +0000 (01:51 +0000)]
btrfs: tree-checker: Enhance output for check_extent_data_item

Output the invalid member name and its bad value, along with its
expected value range or alignment.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tree-checker: Enhance output for check_csum_item
Qu Wenruo [Mon, 9 Oct 2017 01:51:05 +0000 (01:51 +0000)]
btrfs: tree-checker: Enhance output for check_csum_item

Output the bad value and expected good value (or its alignment).

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ unindent long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tree-checker: Enhance output for btrfs_check_leaf
Qu Wenruo [Mon, 9 Oct 2017 01:51:04 +0000 (01:51 +0000)]
btrfs: tree-checker: Enhance output for btrfs_check_leaf

Enhance the output to print:
1) the eason
2) the ad value, if reason is not sufficient
3) good value (range)

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording, unidented long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tree-checker: Enhance btrfs_check_node output
Qu Wenruo [Mon, 9 Oct 2017 01:51:03 +0000 (01:51 +0000)]
btrfs: tree-checker: Enhance btrfs_check_node output

Use inline function to replace macro since we don't need
stringification.
(Macro still exists until all callers get updated)

And add more info about the error, and replace EIO with EUCLEAN.

For nr_items error, report if it's too large or too small, and output
the valid value range.

For node block pointer, added a new alignment checker.

For key order, also output the next key to make the problem more
obvious.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording adjustments, unindented long strings ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Move leaf and node validation checker to tree-checker.c
Qu Wenruo [Mon, 9 Oct 2017 01:51:02 +0000 (01:51 +0000)]
btrfs: Move leaf and node validation checker to tree-checker.c

It's no doubt the comprehensive tree block checker will become larger,
so moving them into their own files is quite reasonable.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
[ wording adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: compress_file_range remove dead variable num_bytes
Timofey Titovets [Tue, 3 Oct 2017 15:06:01 +0000 (18:06 +0300)]
Btrfs: compress_file_range remove dead variable num_bytes

Remove dead assigment of num_bytes.

Also as num_bytes only used in the will_compress block as copy of
total_in just replace that with total_in and drop num_bytes entirely.

Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: use appropriate replacements for __sb_{start,end}_write calls
Rakesh Pandit [Tue, 10 Oct 2017 10:48:05 +0000 (13:48 +0300)]
btrfs: use appropriate replacements for __sb_{start,end}_write calls

Commit a53f4f8e9c8eb ("btrfs: Don't call btrfs_start_transaction() on
frozen fs to avoid deadlock.") started using internal calls and we
replace them with more suitable ones.

Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: prefix sysfs attribute struct names
Hans van Kranenburg [Sun, 8 Oct 2017 20:30:58 +0000 (22:30 +0200)]
btrfs: prefix sysfs attribute struct names

Currently struct names for sysfs are generated only based on the
attribute names. This means that attribute names cannot be reused in
multiple places throughout the complete btrfs sysfs hierarchy.

E.g. allocation/data/total_bytes and allocation/data/single/total_bytes
result in the same struct name btrfs_attr_total_bytes. A workaround for
this case was made in the past by ad hoc creating an extra macro
wrapper, BTRFS_RAID_ATTR, that inserts some extra text in the struct
name.

Instead of polluting sysfs.h with such kind of extra macro definitions,
and only doing so when there are collisions, use a prefix which gets
inserted in the struct name, so we keep everything nicely grouped
together by default.

Current collections of attributes are:
* (the toplevel, empty prefix)
* allocation
* space_info
* raid
* features

Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Fix bool initialization/comparison
Thomas Meyer [Sat, 7 Oct 2017 14:02:21 +0000 (16:02 +0200)]
btrfs: Fix bool initialization/comparison

Bool initializations should use true and false. Bool tests don't need
comparisons.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Refactor transaction handling in received subvolume ioctl
Nikolay Borisov [Thu, 28 Sep 2017 08:45:26 +0000 (11:45 +0300)]
btrfs: Refactor transaction handling in received subvolume ioctl

If btrfs_transaction_commit fails it will proceed to call
cleanup_transaction, which in turn already does btrfs_abort_transaction.
So let's remove the unnecessary code duplication. Also let's be explicit
about handling failure of btrfs_uuid_tree_add by calling
btrfs_end_transaction.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Explicitly handle btrfs_update_root failure
Nikolay Borisov [Thu, 28 Sep 2017 07:53:17 +0000 (10:53 +0300)]
btrfs: Explicitly handle btrfs_update_root failure

btrfs_udpate_root can fail and it aborts the transaction, the correct
way to handle an aborted transaction is to explicitly end with
btrfs_end_transaction.  Even now the code is correct since
btrfs_commit_transaction would handle an aborted transaction but this is
more of an implementation detail. So let's be explicit in handling
failure in btrfs_update_root.

Furthermore btrfs_commit_transaction can also fail and by ignoring it's
return value we could have left the in-memory copy of the root item in
an inconsistent state. So capture the error value which allows us to
correctly revert the RO/RW flags in case of commit failure.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: error out if btrfs_attach_transaction() fails
Anand Jain [Thu, 28 Sep 2017 06:51:11 +0000 (14:51 +0800)]
btrfs: error out if btrfs_attach_transaction() fails

btrfs_init_new_device() calls btrfs_attach_transaction() to
commit sys chunks, and it should error out if it fails.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix BUG_ON in btrfs_init_new_device()
Anand Jain [Thu, 28 Sep 2017 06:51:10 +0000 (14:51 +0800)]
btrfs: fix BUG_ON in btrfs_init_new_device()

Instead of BUG_ON return error to the caller. And handle the fail
condition by calling the abort transaction and going through the
error path.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: undo writable superblocke when sprouting fails
Anand Jain [Thu, 28 Sep 2017 06:51:09 +0000 (14:51 +0800)]
btrfs: undo writable superblocke when sprouting fails

When new device is being added to seed FS, seed FS is marked writable,
but when we fail to bring in the new device, we missed to undo the
writable part. This patch fixes it.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Add checker for EXTENT_CSUM
Qu Wenruo [Wed, 23 Aug 2017 07:57:59 +0000 (16:57 +0900)]
btrfs: Add checker for EXTENT_CSUM

EXTENT_CSUM checker is a relatively easy one, only needs to check:

1) Objectid
   Fixed to BTRFS_EXTENT_CSUM_OBJECTID

2) Key offset alignment
   Must be aligned to sectorsize

3) Item size alignedment
   Must be aligned to csum size

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Add sanity check for EXTENT_DATA when reading out leaf
Qu Wenruo [Wed, 23 Aug 2017 07:57:58 +0000 (16:57 +0900)]
btrfs: Add sanity check for EXTENT_DATA when reading out leaf

Add extra checks for item with EXTENT_DATA type.  This checks the
following thing:

0) Key offset
   All key offsets must be aligned to sectorsize.
   Inline extent must have 0 for key offset.

1) Item size
   Uncompressed inline file extent size must match item size.
   (Compressed inline file extent has no information about its on-disk size.)
   Regular/preallocated file extent size must be a fixed value.

2) Every member of regular file extent item
   Including alignment for bytenr and offset, possible value for
   compression/encryption/type.

3) Type/compression/encode must be one of the valid values.

This should be the most comprehensive and strict check in the context
of btrfs_item for EXTENT_DATA.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch to BTRFS_FILE_EXTENT_TYPES, similar to what
  BTRFS_COMPRESS_TYPES does ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Check if item pointer overlaps with the item itself
Qu Wenruo [Wed, 23 Aug 2017 07:57:57 +0000 (16:57 +0900)]
btrfs: Check if item pointer overlaps with the item itself

Function check_leaf() checks if any item pointer points outside of the
leaf, but it doesn't check if the pointer overlaps with the item itself.

Normally only the last item may be the victim, but adding such check is
never a bad idea anyway.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Refactor check_leaf function for later expansion
Qu Wenruo [Wed, 23 Aug 2017 07:57:56 +0000 (16:57 +0900)]
btrfs: Refactor check_leaf function for later expansion

Current check_leaf() function does a good job checking key order and
item offset/size.

However it only checks from slot 0 to the last but one slot, this is
good but makes later expansion hard.

So this refactoring iterates from slot 0 to the last slot.
For key comparison, it uses a key with all 0 as initial key, so all
valid keys should be larger than that.

And for item size/offset checks, it compares current item end with
previous item offset.
For slot 0, use leaf end as a special case.

This makes later item/key offset checks and item size checks easier to
be implemented.

Also, makes check_leaf() to return -EUCLEAN other than -EIO to indicate
error.

Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: cleanup 'start' subtraction from try uncompressed inline extent
Timofey Titovets [Thu, 14 Sep 2017 22:57:26 +0000 (01:57 +0300)]
Btrfs: cleanup 'start' subtraction from try uncompressed inline extent

Was added in:
  c8b978188c9a0fd3d535c13debd19d522b726f1f
  "Btrfs: Add zlib compression support"
Survive to near time (from 08.10.2008).

Because 'start' checked for zero before branch, so it's safe to remove
that subtraction.

Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: change how we decide to commit transactions during flushing
Josef Bacik [Tue, 22 Aug 2017 20:00:39 +0000 (16:00 -0400)]
btrfs: change how we decide to commit transactions during flushing

Nikolay reported that generic/273 was failing currently with ENOSPC.
Turns out this is because we get to the point where the outstanding
reservations are greater than the pinned space on the fs.  This is a
mistake, previously we used the current reservation amount in
may_commit_transaction, not the entire outstanding reservation amount.
Fix this to find the minimum byte size needed to make progress in
flushing, and pass that into may_commit_transaction.  From there we can
make a smarter decision on whether to commit the transaction or not.
This fixes the failure in generic/273.

From Nikolai, IOW: when we go to the final stage of deciding whether to
do trans commit, instead of passing all the reservations from all
tickets we just pass the reservation for the current ticket. Otherwise,
in case all reservations exceed pinned space, then we don't commit
transaction and fail prematurely. Before we passed num_bytes from
flush_space, where num_bytes was the sum of all pending reserverations,
but now all we do is take the first ticket and commit the trans if we
can satisfy that.

Fixes: 957780eb2788 ("Btrfs: introduce ticketed enospc infrastructure")
Cc: stable@vger.kernel.org # 4.8
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
[ added Nikolai's comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: send, apply asynchronous page cache readahead to enhance page read
Kuanling Huang [Fri, 15 Sep 2017 08:47:45 +0000 (16:47 +0800)]
Btrfs: send, apply asynchronous page cache readahead to enhance page read

By analyzing the perf on btrfs send, we found it take large amount of
cpu time on page_cache_sync_readahead. This effort can be reduced after
switching to asynchronous one. Overall performance gain on HDD and SSD
were 9 and 15 percent if simply send a large file.

Signed-off-by: Kuanling Huang <peterh@synology.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: fix memory leak in raid56
Liu Bo [Fri, 22 Sep 2017 18:11:18 +0000 (12:11 -0600)]
Btrfs: fix memory leak in raid56

The local bio_list may have pending bios when doing cleanup, it can
end up with memory leak if they don't get freed.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: make array types static const, reduces object code size
Colin Ian King [Tue, 19 Sep 2017 15:01:23 +0000 (16:01 +0100)]
btrfs: make array types static const, reduces object code size

Don't populate the read-only array types on the stack, instead make
it static const.  Makes the object code smaller by nearly 60 bytes:

Before:
   text    data     bss     dec     hex filename
  90536    6552      64   97152   17b80 fs/btrfs/ioctl.o

After:
   text    data     bss     dec     hex filename
  90414    6616      64   97094   17b46 fs/btrfs/ioctl.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: return -ENOMEM on allocation failure in btrfsic
Allen Pais [Wed, 20 Sep 2017 06:17:46 +0000 (11:47 +0530)]
btrfs: return -ENOMEM on allocation failure in btrfsic

Forward the correct return value -ENOMEM from btrfsic_dev_state_alloc()
too.

Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ adjust changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: fix confusing worker helper info in stacktrace
Liu Bo [Wed, 13 Sep 2017 18:09:28 +0000 (12:09 -0600)]
Btrfs: fix confusing worker helper info in stacktrace

We've seen the following backtrace stack in ftrace or dmesg log,

  kworker/u16:10-4244  [000] 241942.480955: function:             btrfs_put_ordered_extent
  kworker/u16:10-4244  [000] 241942.480956: kernel_stack:         <stack trace>
=> finish_ordered_fn (ffffffffa0384475)
=> btrfs_scrubparity_helper (ffffffffa03ca577)        <-----"incorrect"
=> btrfs_freespace_write_helper (ffffffffa03ca98e)    <-----"correct"
=> process_one_work (ffffffff81117b2f)
=> worker_thread (ffffffff81118c2a)
=> kthread (ffffffff81121de0)
=> ret_from_fork (ffffffff81d7087a)

btrfs_freespace_write_helper is actually calling normal_worker_helper
instead of btrfs_scrubparity_helper, so somehow kernel has parsed the
incorrect function address while unwinding the stack,
btrfs_scrubparity_helper really shouldn't be shown up.

It's caused by compiler doing inline for our helper function, adding a
noinline tag can fix that.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use noinline_for_stack ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: remove bio_flags which indicates a meta block of log-tree
Liu Bo [Wed, 13 Sep 2017 18:18:22 +0000 (12:18 -0600)]
Btrfs: remove bio_flags which indicates a meta block of log-tree

Since both committing transaction and writing log-tree are doing
plugging on metadata IO, we can unify to use %sync_writers to benefit
both cases, instead of checking bio_flags while writing meta blocks of
log-tree.

We can remove this bio_flags because in order to write dirty blocks,
log tree also uses btrfs_write_marked_extents(), inside which we
have enabled %sync_writers, therefore, every write goes in a
synchronous way, so does checksuming.

Please also note that, bio_flags is applied per-context while
%sync_writers is applied per-inode, so this might incur some overhead, ie.

1) while log tree is flushing its dirty blocks via
   btrfs_write_marked_extents(), in which %sync_writers is increased
   by one.

2) in the meantime, some writeback operations may happen upon btrfs's
   metadata inode, so these writes go synchronously, too.

However, AFAICS, the overhead is not a big one while the win is that
we unify the two places that needs synchronous way and remove a
special hack/flag.

This removes the bio_flags related stuff for writing log-tree.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: make plug in writing meta blocks really work
Liu Bo [Mon, 21 Aug 2017 21:49:59 +0000 (15:49 -0600)]
Btrfs: make plug in writing meta blocks really work

We have started plug in btrfs_write_and_wait_marked_extents() but the
generated IOs actually go to device's schedule IO list where the work
is doing in another task, thus the started plug doesn't make any
sense.

And since we wait for IOs immediately after writing meta blocks, it's
the same case as writing log tree, doing sync submit can merge more
IOs.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert all mount option checking code to use btrfs_test_opt
Satoru Takeuchi [Tue, 12 Sep 2017 11:08:08 +0000 (20:08 +0900)]
btrfs: convert all mount option checking code to use btrfs_test_opt

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: avoid null pointer dereference on fs_info when calling btrfs_crit
Colin Ian King [Mon, 11 Sep 2017 15:15:28 +0000 (16:15 +0100)]
btrfs: avoid null pointer dereference on fs_info when calling btrfs_crit

There are checks on fs_info in __btrfs_panic to avoid dereferencing a
null fs_info, however, there is a call to btrfs_crit that may also
dereference a null fs_info. Fix this by adding a check to see if fs_info
is null and only print the s_id if fs_info is non-null.

Detected by CoverityScan CID#401973 ("Dereference after null check")

Fixes: efe120a067c8 ("Btrfs: convert printk to btrfs_ and fix BTRFS prefix")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Clean up dead code in root-tree
Christos Gkekas [Sat, 9 Sep 2017 14:29:34 +0000 (15:29 +0100)]
btrfs: Clean up dead code in root-tree

The value of variable 'can_recover' is never used after being set, thus
it should be removed, as it was never used since the first commit
68a7342c51c95042 ("Btrfs: cleanup orphaned root orphan item").

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: tests: Fix a memory leak in error handling path in 'run_test()'
Christophe JAILLET [Sun, 10 Sep 2017 11:19:38 +0000 (13:19 +0200)]
btrfs: tests: Fix a memory leak in error handling path in 'run_test()'

If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove redundant argument of __link_block_group
Nikolay Borisov [Mon, 21 Aug 2017 09:43:50 +0000 (12:43 +0300)]
btrfs: Remove redundant argument of __link_block_group

__link_block_group is called from only 2 places and at each call site the
space_info being passed is the same as the space info assigned to the passed
cache struct. Let's remove the redundant argument and make the function
reference the space_info from the passed block_group_cache. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ renamed to link_block_group ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Rework error handling of add_extent_mapping in __btrfs_alloc_chunk
Nikolay Borisov [Mon, 21 Aug 2017 09:43:49 +0000 (12:43 +0300)]
btrfs: Rework error handling of add_extent_mapping in __btrfs_alloc_chunk

Currently the code executes add_extent_mapping and if it is successful
it links the new mapping, it then proceeds to unlock the extent mapping
tree and check for failure and handle them. Instead, rework the code to
only perform a single check if add_extent_mapping has failed and handle
it, otherwise the code continues in a linear fashion. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove unused parameter from check_direct_IO
Nikolay Borisov [Mon, 21 Aug 2017 09:43:46 +0000 (12:43 +0300)]
btrfs: Remove unused parameter from check_direct_IO

Introduced by 5a5f79b57069 ("Btrfs: allow unaligned DIO") and never
used. The buffered fallback from unaligned DIO works as expected.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove unused arguments from btrfs_changed_cb_t
Nikolay Borisov [Mon, 21 Aug 2017 09:43:45 +0000 (12:43 +0300)]
btrfs: Remove unused arguments from btrfs_changed_cb_t

btrfs_changed_cb_t represents the signature of the callback being passed
to btrfs_compare_trees. Currently there is only one such callback,
namely changed_cb in send.c. This function doesn't really uses the first
2 parameters, i.e. the roots. Since there are not other functions
implementing the btrfs_changed_cb_t let's remove the unused parameters
from the prototype and implementation.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove unused parameters from various functions
Nikolay Borisov [Mon, 21 Aug 2017 09:43:44 +0000 (12:43 +0300)]
btrfs: Remove unused parameters from various functions

iterate_dir_item:found_key - introduced in 31db9f7c23fb ("Btrfs:
  introduce BTRFS_IOC_SEND for btrfs send/receive"), yet never used.

record_ref:num - ditto

This is a first pass with the low-hanging fruit. There are still quite a
few unsued parameters in some function which have to abide by a callback
interface.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove unused variable
Nikolay Borisov [Mon, 21 Aug 2017 09:43:43 +0000 (12:43 +0300)]
btrfs: Remove unused variable

Src was initially part of 31ff1cd25d37 ("Btrfs: Copy into the log tree in
big batches"), however 16e7549f045d ("Btrfs: incompatible format change
to remove hole extents") changed parameters passed to copy_items which
made the src variable redundant.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: do not async submit for nodatasum inodes
Liu Bo [Fri, 18 Aug 2017 17:54:02 +0000 (11:54 -0600)]
Btrfs: do not async submit for nodatasum inodes

While we submit direct writes, if the inode is flagged with nodatasum,
there's no benefit to submit asynchronously, because

a) we don't have to calculate checksum across processors,

b) and direct IO has started a plug, but async submit makes us queue
IO on each device's scheduled IO list instead of DIO's plug list, so
that IOs get much less merges in general.

Lets use sync submit for nodatasum inodes.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: search parity device wisely
Liu Bo [Thu, 3 Aug 2017 19:53:31 +0000 (13:53 -0600)]
Btrfs: search parity device wisely

After mapping block with BTRFS_MAP_WRITE, parities have been sorted to
the end position, so this search can start from the first parity
stripe.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied changelog as a comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: copy fsid to super_block s_uuid
Anand Jain [Tue, 1 Aug 2017 10:35:08 +0000 (18:35 +0800)]
btrfs: copy fsid to super_block s_uuid

We didn't copy fsid to struct super_block.s_uuid so Overlay disables
index feature with btrfs as the lower FS.

kernel: overlayfs: fs on '/lower' does not support file handles, falling back to index=off.

Fix this by publishing the fsid through struct super_block.s_uuid.

[ dsterba: I think that setting s_uuid is the last missing bit. Overlay
  needs the file handle encoding support from the lower filesystem, which
  is supported. Filling the whole filesystem id is correct, the subvolume
  id is encoded in the file handle buffer from inside btrfs_encode_fh. ]

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: fix __user casting in ioctl.c
Omar Sandoval [Wed, 23 Aug 2017 06:46:05 +0000 (23:46 -0700)]
Btrfs: fix __user casting in ioctl.c

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: make some volumes.c functions static
Omar Sandoval [Wed, 23 Aug 2017 06:46:04 +0000 (23:46 -0700)]
Btrfs: make some volumes.c functions static

These aren't used outside of volumes.c.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: declare TRACE_DEFINE_ENUM for each of show_flush_state enum
Anand Jain [Wed, 30 Aug 2017 14:36:48 +0000 (22:36 +0800)]
btrfs: declare TRACE_DEFINE_ENUM for each of show_flush_state enum

So that perf can show the state symbol.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Remove redundant forward declarations
Nikolay Borisov [Thu, 31 Aug 2017 08:48:51 +0000 (11:48 +0300)]
btrfs: Remove redundant forward declarations

Some static functions are needlessly forward declared. Let's remove those
declarations since they add no value.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: protect conditions within root->log_mutex while waiting
Liu Bo [Fri, 1 Sep 2017 22:14:30 +0000 (16:14 -0600)]
Btrfs: protect conditions within root->log_mutex while waiting

Both wait_for_commit() and wait_for_writer() are checking the
condition out of the mutex lock.

This refactors code a bit to be lock safe.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: use wait_event instead of a single function
Liu Bo [Fri, 1 Sep 2017 22:14:29 +0000 (16:14 -0600)]
Btrfs: use wait_event instead of a single function

Since TASK_UNINTERRUPTIBLE has been used here, wait_event() can do the
same job.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: move finish_wait out of the loop
Liu Bo [Fri, 1 Sep 2017 22:14:28 +0000 (16:14 -0600)]
Btrfs: move finish_wait out of the loop

If we're still going to wait after schedule(), we don't have to do
finish_wait() to remove our %wait_queue_entry since prepare_to_wait()
won't add the same %wait_queue_entry twice.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: remove batch plug in run_scheduled_IO
Liu Bo [Fri, 1 Sep 2017 22:14:26 +0000 (16:14 -0600)]
Btrfs: remove batch plug in run_scheduled_IO

Block layer has a limit on plug, ie. BLK_MAX_REQUEST_COUNT == 16, so
we don't gain benefits by batching 64 bios here.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoLinux 4.14-rc7 v4.14-rc7
Linus Torvalds [Sun, 29 Oct 2017 20:58:38 +0000 (13:58 -0700)]
Linux 4.14-rc7

4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 29 Oct 2017 15:11:49 +0000 (08:11 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix route leak in xfrm_bundle_create().

 2) In mac80211, validate user rate mask before configuring it. From
    Johannes Berg.

 3) Properly enforce memory limits in fair queueing code, from Toke
    Hoiland-Jorgensen.

 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.

 5) Fix TSO header allocation and management in mvpp2 driver, from Yan
    Markman.

 6) Don't take socket lock in BH handler in strparser code, from Tom
    Herbert.

 7) Don't show sockets from other namespaces in AF_UNIX code, from
    Andrei Vagin.

 8) Fix double free in error path of tap_open(), from Girish Moodalbail.

 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
    and Alexander Duyck.

10) Fix DCB mode programming in stmmac driver, from Jose Abreu.

11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
    Long.

12) Properly align SKB head before building SKB in tuntap, from Jason
    Wang.

13) Avoid matching qdiscs with a zero handle during lookups, from Cong
    Wang.

14) Fix various endianness bugs in sctp, from Xin Long.

15) Fix tc filter callback races and add selftests which trigger the
    problem, from Cong Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  selftests: Introduce a new test case to tc testsuite
  selftests: Introduce a new script to generate tc batch file
  net_sched: fix call_rcu() race on act_sample module removal
  net_sched: add rtnl assertion to tcf_exts_destroy()
  net_sched: use tcf_queue_work() in tcindex filter
  net_sched: use tcf_queue_work() in rsvp filter
  net_sched: use tcf_queue_work() in route filter
  net_sched: use tcf_queue_work() in u32 filter
  net_sched: use tcf_queue_work() in matchall filter
  net_sched: use tcf_queue_work() in fw filter
  net_sched: use tcf_queue_work() in flower filter
  net_sched: use tcf_queue_work() in flow filter
  net_sched: use tcf_queue_work() in cgroup filter
  net_sched: use tcf_queue_work() in bpf filter
  net_sched: use tcf_queue_work() in basic filter
  net_sched: introduce a workqueue for RCU callbacks of tc filter
  sctp: fix some type cast warnings introduced since very beginning
  sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
  sctp: fix some type cast warnings introduced by transport rhashtable
  sctp: fix some type cast warnings introduced by stream reconf
  ...

4 years agoMerge branch 'net_sched-fix-races-with-RCU-callbacks'
David S. Miller [Sun, 29 Oct 2017 13:49:32 +0000 (22:49 +0900)]
Merge branch 'net_sched-fix-races-with-RCU-callbacks'

Cong Wang says:

====================
net_sched: fix races with RCU callbacks

Recently, the RCU callbacks used in TC filters and TC actions keep
drawing my attention, they introduce at least 4 race condition bugs:

1. A simple one fixed by Daniel:

commit c78e1746d3ad7d548bdf3fe491898cc453911a49
Author: Daniel Borkmann <daniel@iogearbox.net>
Date:   Wed May 20 17:13:33 2015 +0200

    net: sched: fix call_rcu() race on classifier module unloads

2. A very nasty one fixed by me:

commit 1697c4bb5245649a23f06a144cc38c06715e1b65
Author: Cong Wang <xiyou.wangcong@gmail.com>
Date:   Mon Sep 11 16:33:32 2017 -0700

    net_sched: carefully handle tcf_block_put()

3. Two more bugs found by Chris:
https://patchwork.ozlabs.org/patch/826696/
https://patchwork.ozlabs.org/patch/826695/

Usually RCU callbacks are simple, however for TC filters and actions,
they are complex because at least TC actions could be destroyed
together with the TC filter in one callback. And RCU callbacks are
invoked in BH context, without locking they are parallel too. All of
these contribute to the cause of these nasty bugs.

Alternatively, we could also:

a) Introduce a spinlock to serialize these RCU callbacks. But as I
said in commit 1697c4bb5245 ("net_sched: carefully handle
tcf_block_put()"), it is very hard to do because of tcf_chain_dump().
Potentially we need to do a lot of work to make it possible (if not
impossible).

b) Just get rid of these RCU callbacks, because they are not
necessary at all, callers of these call_rcu() are all on slow paths
and holding RTNL lock, so blocking is allowed in their contexts.
However, David and Eric dislike adding synchronize_rcu() here.

As suggested by Paul, we could defer the work to a workqueue and
gain the permission of holding RTNL again without any performance
impact, however, in tcf_block_put() we could have a deadlock when
flushing workqueue while hodling RTNL lock, the trick here is to
defer the work itself in workqueue and make it queued after all
other works so that we keep the same ordering to avoid any
use-after-free. Please see the first patch for details.

Patch 1 introduces the infrastructure, patch 2~12 move each
tc filter to the new tc filter workqueue, patch 13 adds
an assertion to catch potential bugs like this, patch 14
closes another rcu callback race, patch 15 and patch 16 add
new test cases.
====================

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoselftests: Introduce a new test case to tc testsuite
Chris Mi [Fri, 27 Oct 2017 01:24:43 +0000 (18:24 -0700)]
selftests: Introduce a new test case to tc testsuite

In this patchset, we fixed a tc bug. This patch adds the test case
that reproduces the bug. To run this test case, user should specify
an existing NIC device:
  # sudo ./tdc.py -d enp4s0f0

This test case belongs to category "flower". If user doesn't specify
a NIC device, the test cases belong to "flower" will not be run.

In this test case, we create 1M filters and all filters share the same
action. When destroying all filters, kernel should not panic. It takes
about 18s to run it.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoselftests: Introduce a new script to generate tc batch file
Chris Mi [Fri, 27 Oct 2017 01:24:42 +0000 (18:24 -0700)]
selftests: Introduce a new script to generate tc batch file

  # ./tdc_batch.py -h
  usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file

  TC batch file generator

  positional arguments:
    device                device name
    file                  batch file name

  optional arguments:
    -h, --help            show this help message and exit
    -n NUMBER, --number NUMBER
                          how many lines in batch file
    -o, --skip_sw         skip_sw (offload), by default skip_hw
    -s, --share_action    all filters share the same action
    -p, --prio            all filters have different prio

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: fix call_rcu() race on act_sample module removal
Cong Wang [Fri, 27 Oct 2017 01:24:41 +0000 (18:24 -0700)]
net_sched: fix call_rcu() race on act_sample module removal

Similar to commit c78e1746d3ad
("net: sched: fix call_rcu() race on classifier module unloads"),
we need to wait for flying RCU callback tcf_sample_cleanup_rcu().

Cc: Yotam Gigi <yotamg@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: add rtnl assertion to tcf_exts_destroy()
Cong Wang [Fri, 27 Oct 2017 01:24:40 +0000 (18:24 -0700)]
net_sched: add rtnl assertion to tcf_exts_destroy()

After previous patches, it is now safe to claim that
tcf_exts_destroy() is always called with RTNL lock.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in tcindex filter
Cong Wang [Fri, 27 Oct 2017 01:24:39 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in tcindex filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in rsvp filter
Cong Wang [Fri, 27 Oct 2017 01:24:38 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in rsvp filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in route filter
Cong Wang [Fri, 27 Oct 2017 01:24:37 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in route filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in u32 filter
Cong Wang [Fri, 27 Oct 2017 01:24:36 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in u32 filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in matchall filter
Cong Wang [Fri, 27 Oct 2017 01:24:35 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in matchall filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in fw filter
Cong Wang [Fri, 27 Oct 2017 01:24:34 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in fw filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in flower filter
Cong Wang [Fri, 27 Oct 2017 01:24:33 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in flower filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in flow filter
Cong Wang [Fri, 27 Oct 2017 01:24:32 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in flow filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in cgroup filter
Cong Wang [Fri, 27 Oct 2017 01:24:31 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in cgroup filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet_sched: use tcf_queue_work() in bpf filter
Cong Wang [Fri, 27 Oct 2017 01:24:30 +0000 (18:24 -0700)]
net_sched: use tcf_queue_work() in bpf filter

Defer the tcf_exts_destroy() in RCU callback to
tc filter workqueue and get RTNL lock.

Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>