Alexey Dobriyan [Wed, 23 Sep 2009 22:57:32 +0000 (15:57 -0700)]
aio: ifdef fields in mm_struct
->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Wed, 23 Sep 2009 22:57:31 +0000 (15:57 -0700)]
memstick: move dev_dbg
id_reg.if_mode might be unitialized when (*mrq)->error is nonzero. move
dev_dbg() inside the if so that we are sure we can use id_reg values.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roel Kluin [Wed, 23 Sep 2009 22:57:30 +0000 (15:57 -0700)]
adfs: remove redundant test on unsigned
unsigned block cannot be less than 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Wed, 23 Sep 2009 22:57:29 +0000 (15:57 -0700)]
edac: core: remove completion-wait for complete with rcu_barrier
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c
and edac_pci.c.
They all use a wait_for_completion() scheme, but this scheme it not 100%
safe on multiple CPUs. See the _rcu_barrier() implementation which
explains why extra precausion is needed.
The patch adds a comment about rcu_barrier() and as a precausion calls
rcu_barrier(). A maintainer needs to look at removing the
wait_for_completion code.
[dougthompson@xmission.com: remove the wait_for_completion code]
Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Uhlenkott [Wed, 23 Sep 2009 22:57:27 +0000 (15:57 -0700)]
edac: i3200 memory controller driver
A driver for the Intel 3200 and 3210 memory controllers. It has only had
light testing so far, and currently makes no attempt to decode error
addresses at anything finer than csrow granularity.
Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Julia Lawall [Wed, 23 Sep 2009 22:57:26 +0000 (15:57 -0700)]
edac: fix resource size calculation
Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
struct resource *res;
@@
- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ira W. Snyder [Wed, 23 Sep 2009 22:57:25 +0000 (15:57 -0700)]
edac: mpc85xx add mpc83xx support
Add support for the Freescale MPC83xx memory controller to the existing
driver for the Freescale MPC85xx memory controller. The only difference
between the two processors are in the CS_BNDS register parsing code, which
has been changed so it will work on both processors.
The L2 cache controller does not exist on the MPC83xx, but the OF
subsystem will not use the driver if the device is not present in the OF
device tree.
I had to change the nr_pages calculation to make the math work out. I
checked it on my board and did the math by hand for a 64GB 85xx using 64K
pages. In both cases, nr_pages * PAGE_SIZE comes out to the correct
value.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Wed, 23 Sep 2009 22:57:24 +0000 (15:57 -0700)]
edac: mpc85xx add P2020DS support
Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC
compatible lists so that EDAC can recognize P2020 meomry controller and L2
cache controller and export the relevant fields to sysfs.
EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a
P2020DS board so that EDAC core can recognize DDR3 memory type.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Acked-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 23 Sep 2009 22:57:23 +0000 (15:57 -0700)]
linux/futex.h: place kernel types behind __KERNEL__
The forward decls for some kernel types are only needed by the code behind
__KERNEL__, so don't bleed these types to userspace.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sukadev Bhattiprolu [Wed, 23 Sep 2009 22:57:22 +0000 (15:57 -0700)]
pidns: deny CLONE_PARENT|CLONE_NEWPID combination
CLONE_PARENT was used to implement an older threading model. For
consistency with the CLONE_THREAD check in copy_pid_ns(), disable
CLONE_PARENT with CLONE_NEWPID, at least until the required semantics of
pid namespaces are clear.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sukadev Bhattiprolu [Wed, 23 Sep 2009 22:57:20 +0000 (15:57 -0700)]
fork(): disable CLONE_PARENT for init
When global or container-init processes use CLONE_PARENT, they create a
multi-rooted process tree. Besides siblings of global init remain as
zombies on exit since they are not reaped by their parent (swapper). So
prevent global and container-inits from creating siblings.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 23 Sep 2009 22:57:19 +0000 (15:57 -0700)]
sysctl: remove "struct file *" argument of ->proc_handler
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Wed, 23 Sep 2009 22:57:17 +0000 (15:57 -0700)]
MAINTAINERS: add Matt Mackall and Herbert Xu to HARDWARE RANDOM NUMBER GENERATOR
Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 23 Sep 2009 22:57:16 +0000 (15:57 -0700)]
bfin-otp: add writing support
The on-chip OTP may be written at runtime, so enable support for it in the
driver. However, since writing should really be done only on development
systems, don't bend over backwards to make sure the simple software lock
is per-fd -- per-device is OK.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dimitri Sivanich [Wed, 23 Sep 2009 22:57:15 +0000 (15:57 -0700)]
drivers/char/uv_mmtimer.c: add memory mapped RTC driver for UV
This driver memory maps the UV Hub RTC.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 23 Sep 2009 22:57:14 +0000 (15:57 -0700)]
drivers/char/rio/rioctrl.c: off by one error in rioctrl.c
If DownLoad.ProductCode == MAX_PRODUCT, that would be a problem when we do
RIOBootTable[DownLoad.ProductCode] a couple lines down.
Found by smatch (http://repo.or.cz/w/smatch.git).
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nils Carlson [Wed, 23 Sep 2009 22:57:13 +0000 (15:57 -0700)]
hpet: hpet driver periodic timer setup bug fixes
The periodic interrupt from drivers/char/hpet.c does not work correctly,
both when using the periodic capability of the hardware and while
emulating the periodic interrupt (when hardware does not support periodic
mode).
With timers capable of periodic interrupts, the comparator field is first
set with the period value followed by set of hidden accumulator, which has
the side effect of overwriting the comparator value. This results in
wrong periodicity for the interrupts. For, periodic interrupts to work,
following steps are necessary, in that order.
* Set config with Tn_VAL_SET_CNF bit
* Write to hidden accumulator, the value written is the time when the
first interrupt should be generated
* Write compartor with period interval for subsequent interrupts
(http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
When emulating periodic timer with timers not capable of periodic
interrupt, driver is adding the period to counter value instead of
comparator value, which causes slow drift when using this emulation.
Also, driver seems to add hpetp->hp_delta both while setting up periodic
interrupt and while emulating periodic interrupts with timers not capable
of doing periodic interrupts. This hp_delta will result in slower than
expected interrupt rate and should not be used while setting the interval.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roel Kluin [Wed, 23 Sep 2009 22:57:11 +0000 (15:57 -0700)]
mwave: fix read buffer overflow
Check whether index is within bounds before grabbing the element.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Renzo Davoli [Wed, 23 Sep 2009 22:57:10 +0000 (15:57 -0700)]
fs/char_dev.c: remove useless loop
There are two useless lines in fs/char_dev.c.
In register_chrdev there is a loop to change all '/' into '!' in the
kernel object name.
This code is useless as the same substitution is in kobject_set_name_vargs in
lib/kobject.c:
228 /* ewww... some of these buggers have '/' in the name ... */
229 while ((s = strchr(kobj->name, '/')))
230 s[0] = '!';
kobject_set_name_vargs is called by kobject_set_name.
kobject_set_name is called just above the useless loop.
[hidave.darkstar@gmail.com: fix warning, remove the unused char *s]
Signed-off-by: Renzo Davoli <renzo@cs.unibo.it>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikanth Karthikesan [Wed, 23 Sep 2009 22:57:09 +0000 (15:57 -0700)]
/dev/zero: avoid repeated access_ok() checks
In read_zero, we check for access_ok() once for the count bytes. It is
unnecessarily checked again in clear_user. Use __clear_user, which does
not check for access_ok().
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 23 Sep 2009 22:57:07 +0000 (15:57 -0700)]
flat: use IS_ERR_VALUE() helper macro
There is a common macro now for testing mixed pointer/errno values, so use
that rather than handling the casts ourself.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David McCullough <david_mccullough@securecomputing.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 23 Sep 2009 22:57:06 +0000 (15:57 -0700)]
fdpic: ignore the loader's PT_GNU_STACK when calculating the stack size
Ignore the loader's PT_GNU_STACK when calculating the stack size, and only
consider the executable's PT_GNU_STACK, assuming the executable has one.
Currently the behaviour is to take the largest stack size and use that,
but that means you can't reduce the stack size in the executable. The
loader's stack size should probably only be used when executing the loader
directly.
WARNING: This patch is slightly dangerous - it may render a system
inoperable if the loader's stack size is larger than that of important
executables, and the system relies unknowingly on this increasing the size
of the stack.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Amerigo Wang [Wed, 23 Sep 2009 22:57:05 +0000 (15:57 -0700)]
elf: clean up fill_note_info()
Introduce a helper function elf_note_info_init() to help fill_note_info()
to do initializations, also fix the potential memory leaks.
[akpm@linux-foundation.org: remove NUM_NOTES]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Wed, 23 Sep 2009 22:57:04 +0000 (15:57 -0700)]
signals: inline __fatal_signal_pending
__fatal_signal_pending inlines to one instruction on x86, probably two
instructions on other machines. It takes two longer x86 instructions just
to call it and test its return value, not to mention the function itself.
On my random x86_64 config, this saved 70 bytes of text (59 of those being
__fatal_signal_pending itself).
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Wed, 23 Sep 2009 22:57:03 +0000 (15:57 -0700)]
fcntl: add F_[SG]ETOWN_EX
In order to direct the SIGIO signal to a particular thread of a
multi-threaded application we cannot, like suggested by the manpage, put a
TID into the regular fcntl(F_SETOWN) call. It will still be send to the
whole process of which that thread is part.
Since people do want to properly direct SIGIO we introduce F_SETOWN_EX.
The need to direct SIGIO comes from self-monitoring profiling such as with
perf-counters. Perf-counters uses SIGIO to notify that new sample data is
available. If the signal is delivered to the same task that generated the
new sample it can augment that data by inspecting the task's user-space
state right after it returns from the kernel. This is esp. convenient
for interpreted or virtual machine driven environments.
Both F_SETOWN_EX and F_GETOWN_EX take a pointer to a struct f_owner_ex
as argument:
struct f_owner_ex {
int type;
pid_t pid;
};
Where type is one of F_OWNER_TID, F_OWNER_PID or F_OWNER_GID.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: stephane eranian <eranian@googlemail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:57:01 +0000 (15:57 -0700)]
signals: send_sigio: use do_send_sig_info() to avoid check_kill_permission()
group_send_sig_info()->check_kill_permission() assumes that current is the
sender and uses current_cred().
This is not true in send_sigio_to_task() case. From the security pov the
sender is not current, but the task which did fcntl(F_SETOWN), that is why
we have sigio_perm() which uses the right creds to check.
Fortunately, send_sigio() always sends either SEND_SIG_PRIV or
SI_FROMKERNEL() signal, so check_kill_permission() does nothing. But
still it would be tidier to avoid this bogus security check and save a
couple of cycles.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:57:00 +0000 (15:57 -0700)]
signals: introduce do_send_sig_info() helper
Introduce do_send_sig_info() and convert group_send_sig_info(),
send_sig_info(), do_send_specific() to use this helper.
Hopefully it will have more users soon, it allows to specify
specific/group behaviour via "bool group" argument.
Shaves 80 bytes from .text.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:59 +0000 (15:56 -0700)]
exec: fix set_binfmt() vs sys_delete_module() race
sys_delete_module() can set MODULE_STATE_GOING after
search_binary_handler() does try_module_get(). In this case
set_binfmt()->try_module_get() fails but since none of the callers
check the returned error, the task will run with the wrong old
->binfmt.
The proper fix should change all ->load_binary() methods, but we can
rely on fact that the caller must hold a reference to binfmt->module
and use __module_get() which never fails.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Wed, 23 Sep 2009 22:56:58 +0000 (15:56 -0700)]
exec: allow do_coredump() to wait for user space pipe readers to complete
Allow core_pattern pipes to wait for user space to complete
One of the things that user space processes like to do is look at metadata
for a crashing process in their /proc/<pid> directory. this is racy
however, since do_coredump in the kernel doesn't wait for the user space
process to complete before it reaps the crashing process. This patch
corrects that. Allowing the kernel to wait for the user space process to
complete before cleaning up the crashing process. This is a bit tricky to
do for a few reasons:
1) The user space process isn't our child, so we can't sys_wait4 on it
2) We need to close the pipe before waiting for the user process to complete,
since the user process may rely on an EOF condition
I've discussed several solutions with Oleg Nesterov off-list about this,
and this is the one we've come up with. We add ourselves as a pipe reader
(to prevent premature cleanup of the pipe_inode_info), and remove
ourselves as a writer (to provide an EOF condition to the writer in user
space), then we iterate until the user space process exits (which we
detect by pipe->readers == 1, hence the > 1 check in the loop). When we
exit the loop, we restore the proper reader/writer values, then we return
and let filp_close in do_coredump clean up the pipe data properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Wed, 23 Sep 2009 22:56:56 +0000 (15:56 -0700)]
exec: let do_coredump() limit the number of concurrent dumps to pipes
Introduce core pipe limiting sysctl.
Since we can dump cores to pipe, rather than directly to the filesystem,
we create a condition in which a user can create a very high load on the
system simply by running bad applications.
If the pipe reader specified in core_pattern is poorly written, we can
have lots of ourstandig resources and processes in the system.
This sysctl introduces an ability to limit that resource consumption.
core_pipe_limit defines how many in-flight dumps may be run in parallel,
dumps beyond this value are skipped and a note is made in the kernel log.
A special value of 0 in core_pipe_limit denotes unlimited core dumps may
be handled (this is the default value).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Wed, 23 Sep 2009 22:56:54 +0000 (15:56 -0700)]
exec: make do_coredump() more resilient to recursive crashes
Change how we detect recursive dumps.
Currently we have a mechanism by which we try to compare pathnames of the
crashing process to the core_pattern path. This is broken for a dozen
reasons, and just doesn't work in any sort of robust way.
I'm replacing it with the use of a 0 RLIMIT_CORE value. Since helper apps
set RLIMIT_CORE to zero, we don't write out core files for any process
with that particular limit set. It the core_pattern is a pipe, any
non-zero limit is translated to RLIM_INFINITY.
This allows complete dumps to be captured, but prevents infinite recursion
in the event that the core_pattern process itself crashes.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Wed, 23 Sep 2009 22:56:53 +0000 (15:56 -0700)]
signals: tracehook_notify_jctl change
This changes tracehook_notify_jctl() so it's called with the siglock held,
and changes its argument and return value definition. These clean-ups
make it a better fit for what new tracing hooks need to check.
Tracing needs the siglock here, held from the time TASK_STOPPED was set,
to avoid potential SIGCONT races if it wants to allow any blocking in its
tracing hooks.
This also folds the finish_stop() function into its caller
do_signal_stop(). The function is short, called only once and only
unconditionally. It aids readability to fold it in.
[oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state]
[oleg@redhat.com: introduce tracehook_finish_jctl() helper]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vitaly Mayatskikh [Wed, 23 Sep 2009 22:56:52 +0000 (15:56 -0700)]
wait_noreap_copyout(): check for ->wo_info != NULL
Current behaviour of sys_waitid() looks odd. If user passes infop ==
NULL, sys_waitid() returns success. When user additionally specifies flag
WNOWAIT, sys_waitid() returns -EFAULT on the same conditions. When user
combines WNOWAIT with WCONTINUED, sys_waitid() again returns success.
This patch adds check for ->wo_info in wait_noreap_copyout().
User-visible change: starting from this commit, sys_waitid() always checks
infop != NULL and does not fail if it is NULL.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vitaly Mayatskikh [Wed, 23 Sep 2009 22:56:51 +0000 (15:56 -0700)]
do_wait: fix sys_waitid()-specific behaviour
do_wait() checks ->wo_info to figure out who is the caller. If it's not
NULL the caller should be sys_waitid(), in that case do_wait() fixes up
the retval or zeros ->wo_info, depending on retval from underlying
function.
This is bug: user can pass ->wo_info == NULL and sys_waitid() will return
incorrect value.
man 2 waitid says:
waitid(): returns 0 on success
Test-case:
int main(void)
{
if (fork())
assert(waitid(P_ALL, 0, NULL, WEXITED) == 0);
return 0;
}
Result:
Assertion `waitid(P_ALL, 0, ((void *)0), 4) == 0' failed.
Move that code to sys_waitid().
User-visible change: sys_waitid() will return 0 on success, either
infop is set or not.
Note, there's another bug in wait_noreap_copyout() which affects
return value of sys_waitid(). It will be fixed in next patch.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:50 +0000 (15:56 -0700)]
wait_consider_task: kill "parent" argument
Kill the unused "parent" argument in wait_consider_task(), it was never used.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:49 +0000 (15:56 -0700)]
do_wait-wakeup-optimization: simplify task_pid_type()
task_pid_type() is only used by eligible_pid() which has to check wo_type
!= PIDTYPE_MAX anyway. Remove this check from task_pid_type() and factor
out ->pids[type] access, this shrinks .text a bit and simplifies the code.
The matches the behaviour of other similar helpers, say get_task_pid().
The caller must ensure that pid_type is valid, not the callee.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:48 +0000 (15:56 -0700)]
do_wait-wakeup-optimization: fix child_wait_callback()->eligible_child() usage
child_wait_callback()->eligible_child() is not right, we can miss the
wakeup if the task was detached before __wake_up_parent() and the caller
of do_wait() didn't use __WALL.
Move ->wo_pid checks from eligible_child() to the new helper,
eligible_pid(), and change child_wait_callback() to use it instead of
eligible_child().
Note: actually I think it would be better to fix the __WCLONE check in
eligible_child(), it doesn't look exactly right. But it is not clear what
is the supposed behaviour, and any change is user-visible.
Reported-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:47 +0000 (15:56 -0700)]
do_wait() wakeup optimization: child_wait_callback: check __WNOTHREAD case
Suggested by Roland.
do_wait(__WNOTHREAD) can only succeed if the caller is either ptracer, or
it is ->real_parent and the child is not traced. IOW, caller == p->parent
otherwise we should not wake up.
Change child_wait_callback() to check this. Ratan reports the workload with
CPU load >99% caused by unnecessary wakeups, should be fixed by this patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:46 +0000 (15:56 -0700)]
do_wait() wakeup optimization: change __wake_up_parent() to use filtered wakeup
Ratan Nalumasu reported that in a process with many threads doing
unnecessary wakeups. Every waiting thread in the process wakes up to loop
through the children and see that the only ones it cares about are still
not ready.
Now that we have struct wait_opts we can change do_wait/__wake_up_parent
to use filtered wakeups.
We can make child_wait_callback() more clever later, right now it only
checks eligible_child().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:45 +0000 (15:56 -0700)]
do_wait() wakeup optimization: shift security_task_wait() from eligible_child() to wait_consider_task()
Preparation, no functional changes.
eligible_child() has a single caller, wait_consider_task(). We can move
security_task_wait() out from eligible_child(), this allows us to use it
for filtered wake_up().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 23 Sep 2009 22:56:44 +0000 (15:56 -0700)]
ptrace: __ptrace_detach: do __wake_up_parent() if we reap the tracee
The bug is old, it wasn't cause by recent changes.
Test case:
static void *tfunc(void *arg)
{
int pid = (long)arg;
assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0);
kill(pid, SIGKILL);
sleep(1);
return NULL;
}
int main(void)
{
pthread_t th;
long pid = fork();
if (!pid)
pause();
signal(SIGCHLD, SIG_IGN);
assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0);
int r = waitpid(-1, NULL, __WNOTHREAD);
printf("waitpid: %d %m\n", r);
return 0;
}
Before the patch this program hangs, after this patch waitpid() correctly
fails with errno == -ECHILD.
The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its
->real_parent is our sub-thread and we ignore SIGCHLD. But in this case
we should wake up other threads which can sleep in do_wait().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke Nishimura [Wed, 23 Sep 2009 22:56:43 +0000 (15:56 -0700)]
memcg: show swap usage in stat file
We now count MEM_CGROUP_STAT_SWAPOUT, so we can show swap usage. It would
be useful for users to show swap usage in memory.stat file, because they
don't need calculate memsw.usage - res.usage to know swap usage.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:42 +0000 (15:56 -0700)]
memcg: improve resource counter scalability
Reduce the resource counter overhead (mostly spinlock) associated with the
root cgroup. This is a part of the several patches to reduce mem cgroup
overhead. I had posted other approaches earlier (including using percpu
counters). Those patches will be a natural addition and will be added
iteratively on top of these.
The patch stops resource counter accounting for the root cgroup. The data
for display is derived from the statisitcs we maintain via
mem_cgroup_charge_statistics (which is more scalable). What happens today
is that, we do double accounting, once using res_counter_charge() and once
using memory_cgroup_charge_statistics(). For the root, since we don't
implement limits any more, we don't need to track every charge via
res_counter_charge() and check for limit being exceeded and reclaim.
The main mem->res usage_in_bytes can be derived by summing the cache and
rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE). However, for memsw->res usage_in_bytes, we need
additional data about swapped out memory. This patch adds a
MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE to derive the memsw data. This data is computed
recursively when hierarchy is enabled.
The tests results I see on a 24 way show that
1. The lock contention disappears from /proc/lock_stats
2. The results of the test are comparable to running with
cgroup_disable=memory.
Here is a sample of my program runs
Without Patch
Performance counter stats for '/home/balbir/parallel_pagefault':
7192804.124144 task-clock-msecs # 23.937 CPUs
424691 context-switches # 0.000 M/sec
267 CPU-migrations # 0.000 M/sec
28498113 page-faults # 0.004 M/sec
5826093739340 cycles # 809.989 M/sec
408883496292 instructions # 0.070 IPC
7057079452 cache-references # 0.981 M/sec
3036086243 cache-misses # 0.422 M/sec
300.
485365680 seconds time elapsed
With cgroup_disable=memory
Performance counter stats for '/home/balbir/parallel_pagefault':
7182183.546587 task-clock-msecs # 23.915 CPUs
425458 context-switches # 0.000 M/sec
203 CPU-migrations # 0.000 M/sec
92545093 page-faults # 0.013 M/sec
6034363609986 cycles # 840.185 M/sec
437204346785 instructions # 0.072 IPC
6636073192 cache-references # 0.924 M/sec
2358117732 cache-misses # 0.328 M/sec
300.
320905827 seconds time elapsed
With this patch applied
Performance counter stats for '/home/balbir/parallel_pagefault':
7191619.223977 task-clock-msecs # 23.955 CPUs
422579 context-switches # 0.000 M/sec
88 CPU-migrations # 0.000 M/sec
91946060 page-faults # 0.013 M/sec
5957054385619 cycles # 828.333 M/sec
1058117350365 instructions # 0.178 IPC
9161776218 cache-references # 1.274 M/sec
1920494280 cache-misses # 0.267 M/sec
300.
218764862 seconds time elapsed
Data from Prarit (kernel compile with make -j64 on a 64
CPU/32G machine)
For a single run
Without patch
real 27m8.988s
user 87m24.916s
sys 382m6.037s
With patch
real 4m18.607s
user 84m58.943s
sys 50m52.682s
With config turned off
real 4m54.972s
user 90m13.456s
sys 50m19.711s
NOTE: The data looks counterintuitive due to the increased performance
with the patch, even over the config being turned off. We probably need
more runs, but so far all testing has shown that the patches definitely
help.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:39 +0000 (15:56 -0700)]
memory controller: soft limit reclaim on contention
Implement reclaim from groups over their soft limit
Permit reclaim from memory cgroups on contention (via the direct reclaim
path).
memory cgroup soft limit reclaim finds the group that exceeds its soft
limit by the largest number of pages and reclaims pages from it and then
reinserts the cgroup into its correct place in the rbtree.
Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long
loops in case all swap is turned off. The code has been refactored and
the loop check (loop < 2) has been enhanced for soft limits. For soft
limits, we try to do more targetted reclaim. Instead of bailing out after
two loops, the routine now reclaims memory proportional to the size by
which the soft limit is exceeded. The proportion has been empirically
determined.
[akpm@linux-foundation.org: build fix]
[kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling]
[nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:38 +0000 (15:56 -0700)]
memory controller: soft limit refactor reclaim flags
Refactor mem_cgroup_hierarchical_reclaim()
Refactor the arguments passed to mem_cgroup_hierarchical_reclaim() into
flags, so that new parameters don't have to be passed as we make the
reclaim routine more flexible
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:37 +0000 (15:56 -0700)]
memory controller: soft limit organize cgroups
Organize cgroups over soft limit in a RB-Tree
Introduce an RB-Tree for storing memory cgroups that are over their soft
limit. The overall goal is to
1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
We are careful about updates, updates take place only after a particular
time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
limit
The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.
[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:36 +0000 (15:56 -0700)]
memory controller: soft limit interface
Add an interface to allow get/set of soft limits. Soft limits for memory
plus swap controller (memsw) is currently not supported. Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added. Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.
Kamezawa-San raised a question as to whether soft limit should belong to
res_counter. Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here. Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:34 +0000 (15:56 -0700)]
memory controller: soft limit documentation
Soft limits is a new feature for the memory resource controller, something
similar has existed in the group scheduler in the form of shares. The CPU
controllers interpretation of shares is very different though.
Soft limits are the most useful feature to have for environments where the
administrator wants to overcommit the system, such that only on memory
contention do the limits become active. The current soft limits
implementation provides a soft_limit_in_bytes interface for the memory
controller and not for memory+swap controller. The implementation
maintains an RB-Tree of groups that exceed their soft limit and starts
reclaiming from the group that exceeds this limit by the maximum amount.
This patch:
Add documentation for soft limits
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Wed, 23 Sep 2009 22:56:33 +0000 (15:56 -0700)]
memcg: add comments explaining memory barriers
Add comments for the reason of smp_wmb() in mem_cgroup_commit_charge().
[akpm@linux-foundation.org: coding-style fixes]
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 23 Sep 2009 22:56:32 +0000 (15:56 -0700)]
memcg: remove the overhead associated with the root cgroup
Change the memory cgroup to remove the overhead associated with accounting
all pages in the root cgroup. As a side-effect, we can no longer set a
memory hard limit in the root cgroup.
A new flag to track whether the page has been accounted or not has been
added as well. Flags are now set atomically for page_cgroup,
pcg_default_flags is now obsolete and removed.
[akpm@linux-foundation.org: fix a few documentation glitches]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Blum [Wed, 23 Sep 2009 22:56:31 +0000 (15:56 -0700)]
cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time
Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc. (This is a
pre-patch to cgroup-procs-writable.patch.)
Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader. No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.
[hidave.darkstar@gmail.com: fix build]
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Blum [Wed, 23 Sep 2009 22:56:29 +0000 (15:56 -0700)]
cgroups: change css_set freeing mechanism to be under RCU
Changes css_set freeing mechanism to be under RCU
This is a prepatch for making the procs file writable. In order to free the
old css_sets for each task to be moved as they're being moved, the freeing
mechanism must be RCU-protected, or else we would have to have a call to
synchronize_rcu() for each task before freeing its old css_set.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Blum [Wed, 23 Sep 2009 22:56:28 +0000 (15:56 -0700)]
cgroups: use vmalloc for large cgroups pidlist allocations
Separates all pidlist allocation requests to a separate function that
judges based on the requested size whether or not the array needs to be
vmalloced or can be gotten via kmalloc, and similar for kfree/vfree.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Blum [Wed, 23 Sep 2009 22:56:27 +0000 (15:56 -0700)]
cgroups: ensure correct concurrent opening/reading of pidlists across pid namespaces
Previously there was the problem in which two processes from different pid
namespaces reading the tasks or procs file could result in one process
seeing results from the other's namespace. Rather than one pidlist for
each file in a cgroup, we now keep a list of pidlists keyed by namespace
and file type (tasks versus procs) in which entries are placed on demand.
Each pidlist has its own lock, and that the pidlists themselves are passed
around in the seq_file's private pointer means we don't have to touch the
cgroup or its master list except when creating and destroying entries.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Blum [Wed, 23 Sep 2009 22:56:26 +0000 (15:56 -0700)]
cgroups: add a read-only "procs" file similar to "tasks" that shows only unique tgids
struct cgroup used to have a bunch of fields for keeping track of the
pidlist for the tasks file. Those are now separated into a new struct
cgroup_pidlist, of which two are had, one for procs and one for tasks.
The way the seq_file operations are set up is changed so that just the
pidlist struct gets passed around as the private data.
Interface example: Suppose a multithreaded process has pid 1000 and other
threads with ids 1001, 1002, 1003:
$ cat tasks
1000
1001
1002
1003
$ cat cgroup.procs
1000
$
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Wed, 23 Sep 2009 22:56:25 +0000 (15:56 -0700)]
cgroups: revert "cgroups: fix pid namespace bug"
The following series adds a "cgroup.procs" file to each cgroup that
reports unique tgids rather than pids, and allows all threads in a
threadgroup to be atomically moved to a new cgroup.
The subsystem "attach" interface is modified to support attaching whole
threadgroups at a time, which could introduce potential problems if any
subsystem were to need to access the old cgroup of every thread being
moved. The attach interface may need to be revised if this becomes the
case.
Also added is functionality for read/write locking all CLONE_THREAD
fork()ing within a threadgroup, by means of an rwsem that lives in the
sighand_struct, for per-threadgroup-ness and also for sharing a cacheline
with the sighand's atomic count. This scheme should introduce no extra
overhead in the fork path when there's no contention.
The final patch reveals potential for a race when forking before a
subsystem's attach function is called - one potential solution in case any
subsystem has this problem is to hang on to the group's fork mutex through
the attach() calls, though no subsystem yet demonstrates need for an
extended critical section.
This patch:
Revert
commit
096b7fe012d66ed55e98bc8022405ede0cc80e96
Author: Li Zefan <lizf@cn.fujitsu.com>
AuthorDate: Wed Jul 29 15:04:04 2009 -0700
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Wed Jul 29 19:10:35 2009 -0700
cgroups: fix pid namespace bug
This is in preparation for some clashing cgroups changes that subsume the
original commit's functionaliy.
The original commit fixed a pid namespace bug which Ben Blum fixed
independently (in the same way, but with different code) as part of a
series of patches. I played around with trying to reconcile Ben's patch
series with Li's patch, but concluded that it was simpler to just revert
Li's, given that Ben's patch series contained essentially the same fix.
Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Wed, 23 Sep 2009 22:56:23 +0000 (15:56 -0700)]
cgroups: allow cgroup hierarchies to be created with no bound subsystems
This patch removes the restriction that a cgroup hierarchy must have at
least one bound subsystem. The mount option "none" is treated as an
explicit request for no bound subsystems.
A hierarchy with no subsystems can be useful for plain task tracking, and
is also a step towards the support for multiply-bindable subsystems.
As part of this change, the hierarchy id is no longer calculated from the
bitmask of subsystems in the hierarchy (since this is not guaranteed to be
unique) but is allocated via an ida. Reference counts on cgroups from
css_set objects are now taken explicitly one per hierarchy, rather than
one per subsystem.
Example usage:
mount -t cgroup -o none,name=foo cgroup /mnt/cgroup
Based on the "no-op"/"none" subsystem concept proposed by
kamezawa.hiroyu@jp.fujitsu.com
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Wed, 23 Sep 2009 22:56:22 +0000 (15:56 -0700)]
cgroups: add a back-pointer from struct cg_cgroup_link to struct cgroup
Currently the cgroups code makes the assumption that the subsystem
pointers in a struct css_set uniquely identify the hierarchy->cgroup
mappings associated with the css_set; and there's no way to directly
identify the associated set of cgroups other than by indirecting through
the appropriate subsystem state pointers.
This patch removes the need for that assumption by adding a back-pointer
from struct cg_cgroup_link object to its associated cgroup; this allows
the set of cgroups to be determined by traversing the cg_links list in
the struct css_set.
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Wed, 23 Sep 2009 22:56:20 +0000 (15:56 -0700)]
cgroups: move the cgroup debug subsys into cgroup.c to access internal state
While it's architecturally clean to have the cgroup debug subsystem be
completely independent of the cgroups framework, it limits its usefulness
for debugging the contents of internal data structures. Move the debug
subsystem code into the scope of all the cgroups data structures to make
more detailed debugging possible.
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Wed, 23 Sep 2009 22:56:19 +0000 (15:56 -0700)]
cgroups: support named cgroups hierarchies
To simplify referring to cgroup hierarchies in mount statements, and to
allow disambiguation in the presence of empty hierarchies and
multiply-bindable subsystems this patch adds support for naming a new
cgroup hierarchy via the "name=" mount option
A pre-existing hierarchy may be specified by either name or by subsystems;
a hierarchy's name cannot be changed by a remount operation.
Example usage:
# To create a hierarchy called "foo" containing the "cpu" subsystem
mount -t cgroup -oname=foo,cpu cgroup /mnt/cgroup1
# To mount the "foo" hierarchy on a second location
mount -t cgroup -oname=foo cgroup /mnt/cgroup2
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiaotian Feng [Wed, 23 Sep 2009 22:56:18 +0000 (15:56 -0700)]
cgroups: make unlock sequence in cgroup_get_sb consistent
Make the last unlock sequence consistent with previous unlock sequeue.
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 23 Sep 2009 22:56:17 +0000 (15:56 -0700)]
docs: fix various Documentation/ paths in header files
Fix various Documentation/ paths in include/linux/.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wu Fengguang [Wed, 23 Sep 2009 22:56:16 +0000 (15:56 -0700)]
page-types: add feature for walking process address space
Introduce "-p|--pid <pid>" for walking the process address space. The
default action is to walk raw memory PFNs.
Both the virtual address and physical address of each present pages will
be listed:
# ./tools/vm/page-types -lp $$ | head -3
voffset offset len flags
400 11bebe 1 __RU_lA____M______________________
402 11bebc 1 __RU_lA____M______________________
Note that voffset/offset/len are now showed as hex numbers.
[akpm@linux-foundation.org: coding-style fixes]
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Triplett [Wed, 23 Sep 2009 22:56:15 +0000 (15:56 -0700)]
Documentation/vm/.gitignore: add page-types
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jaswinder Singh Rajput [Wed, 23 Sep 2009 22:56:14 +0000 (15:56 -0700)]
includecheck fix: Documentation, cfag12864b-example.c
fix the following 'make includecheck' warning:
Documentation/auxdisplay/cfag12864b-example.c: string.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiaotian Feng [Wed, 23 Sep 2009 22:56:13 +0000 (15:56 -0700)]
Documentation: update stale definition of file-nr in fs.txt
In "documentation: update Documentation/filesystem/proc.txt and
Documentation/sysctls" (commit
760df93ec) we merged /proc/sys/fs
documentation in Documentation/sysctl/fs.txt and
Documentation/filesystem/proc.txt, but stale file-nr definition
remained.
This patch adds back the right fs-nr definition for 2.6 kernel.
Signed-off-by: Xiaotian Feng<dfeng@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peng Tao [Wed, 23 Sep 2009 22:56:13 +0000 (15:56 -0700)]
doc/filesystems: more mount cleanups
Documentation/filesystems/sharedsubtree.txt needs updating because the
mount command in util-linux package is well aware of shared subtree
features now. The patch also fixes two typos in sharedsubtree.txt.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 23 Sep 2009 22:56:11 +0000 (15:56 -0700)]
doc/filesystems: remove smount program
mount(8) handles shared subtrees just fine, so remove the smount program
from Documentation/filesystems/sharedsubtree.txt.
Fix annoying "Lets" -> "Let's".
Insert space between '#' prompt and "mount" command.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhaolei [Wed, 23 Sep 2009 22:56:10 +0000 (15:56 -0700)]
time: add function to convert between calendar time and broken-down time for universal use
There are many similar code in kernel for one object: convert time between
calendar time and broken-down time.
Here is some source I found:
fs/ncpfs/dir.c
fs/smbfs/proc.c
fs/fat/misc.c
fs/udf/udftime.c
fs/cifs/netmisc.c
net/netfilter/xt_time.c
drivers/scsi/ips.c
drivers/input/misc/hp_sdc_rtc.c
drivers/rtc/rtc-lib.c
arch/ia64/hp/sim/boot/fw-emu.c
arch/m68k/mac/misc.c
arch/powerpc/kernel/time.c
arch/parisc/include/asm/rtc.h
...
We can make a common function for this type of conversion, At least we
can get following benefit:
1: Make kernel simple and unify
2: Easy to fix bug in converting code
3: Reduce clone of code in future
For example, I'm trying to make ftrace display walltime,
this patch will make me easy.
This code is based on code from glibc-2.6
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From: Mel Gorman [Wed, 23 Sep 2009 22:56:05 +0000 (15:56 -0700)]
hugetlbfs: do not call user_shm_lock() for MAP_HUGETLB fix
Commit
6bfde05bf5c ("hugetlbfs: allow the creation of files suitable for
MAP_PRIVATE on the vfs internal mount") altered can_do_hugetlb_shm() to
check if a file is being created for shared memory or mmap(). If this
returns false, we then unconditionally call user_shm_lock() triggering a
warning. This block should never be entered for MAP_HUGETLB. This
patch partially reverts the problem and fixes the check.
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Izik Eidus [Wed, 23 Sep 2009 22:56:04 +0000 (15:56 -0700)]
ksm: change default values to better fit into mainline kernel
Now that ksm is in mainline it is better to change the default values to
better fit to most of the users.
This patch change the ksm default values to be:
ksm_thread_pages_to_scan = 100 (instead of 200)
ksm_thread_sleep_millisecs = 20 (like before)
ksm_run = KSM_RUN_STOP (instead of KSM_RUN_MERGE - meaning ksm is
disabled by default)
ksm_max_kernel_pages = nr_free_buffer_pages / 4 (instead of 2046)
The important aspect of this patch is: it disables ksm by default, and sets
the number of the kernel_pages that can be allocated to be a reasonable
number.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Wed, 23 Sep 2009 22:56:02 +0000 (15:56 -0700)]
input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry
Fix these warnings:
drivers/built-in.o: In function `apanel_remove':
apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `apanel_probe':
apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `acpi_fujitsu_hotkey_add':
fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register'
fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `wbcir_probe':
winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register'
winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `wbcir_remove':
winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `fujitsu_cleanup':
fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister'
fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister'
It happens because the new INPUT_WINBOND_CIR driver relies on new-leds
infrastructure - but does not select it in drivers/input/misc/Kconfig.
But it selects LEDS_CLASS, which confuses a number of other drivers into
thinking that all the leds infrastructure is in place.
Fix this by selecting NEW_LEDS as well, like similar drivers do.
Eventually, this whole leds infrastructure complexity should be
cleaned up, it's been going on for years.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason [Thu, 24 Sep 2009 14:00:58 +0000 (10:00 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable into for-linus
Conflicts:
fs/btrfs/super.c
Yan Zheng [Thu, 24 Sep 2009 13:24:43 +0000 (09:24 -0400)]
Btrfs: hash the btree inode during fill_super
The snapshot deletion patches dropped this line, but the inode
needs to be hashed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yan, Zheng [Thu, 24 Sep 2009 13:17:31 +0000 (09:17 -0400)]
Btrfs: relocate file extents in clusters
The extent relocation code copy file extents one by one when
relocating data block group. This is inefficient if file
extents are small. This patch makes the relocation code copy
file extents in clusters. So we can can make better use of
read-ahead.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yan, Zheng [Thu, 24 Sep 2009 13:17:31 +0000 (09:17 -0400)]
Btrfs: don't rename file into dummy directory
A recent change enforces only one access point to each subvolume. The first
directory entry (the one added when the subvolume/snapshot was created) is
treated as valid access point, all other subvolume links are linked to dummy
empty directories. The dummy directories are temporary inodes that only in
memory, so we can not rename file into them.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yan, Zheng [Thu, 24 Sep 2009 13:17:31 +0000 (09:17 -0400)]
Btrfs: check size of inode backref before adding hardlink
For every hardlink in btrfs, there is a corresponding inode back
reference. All inode back references for hardlinks in a given
directory are stored in single b-tree item. The size of b-tree item
is limited by the size of b-tree leaf, so we can only create limited
number of hardlinks to a given file in a directory.
The original code lacks of the check, it oops if the number of
hardlinks goes over the limit. This patch fixes the issue by adding
check to btrfs_link and btrfs_rename.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
npiggin@suse.de [Thu, 20 Aug 2009 16:35:06 +0000 (02:35 +1000)]
truncate: use new helpers
Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
npiggin@suse.de [Thu, 20 Aug 2009 16:35:05 +0000 (02:35 +1000)]
truncate: new helpers
Introduce new truncate helpers truncate_pagecache and inode_newsize_ok.
vmtruncate is also consolidated from mm/memory.c and mm/nommu.c and
into mm/truncate.c.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Vegard Nossum [Fri, 18 Sep 2009 20:05:45 +0000 (13:05 -0700)]
fs: fix overflow in sys_mount() for in-kernel calls
sys_mount() reads/copies a whole page for its "type" parameter. When
do_mount_root() passes a kernel address that points to an object which is
smaller than a whole page, copy_mount_options() will happily go past this
memory object, possibly dereferencing "wild" pointers that could be in any
state (hence the kmemcheck warning, which shows that parts of the next
page are not even allocated).
(The likelihood of something going wrong here is pretty low -- first of
all this only applies to kernel calls to sys_mount(), which are mostly
found in the boot code. Secondly, I guess if the page was not mapped,
exact_copy_from_user() _would_ in fact handle it correctly because of its
access_ok(), etc. checks.)
But it is much nicer to avoid the dubious reads altogether, by stopping as
soon as we find a NUL byte. Is there a good reason why we can't do
something like this, using the already existing strndup_from_user()?
[akpm@linux-foundation.org: make copy_mount_string() static]
[AV: fix compat mount breakage, which involves undoing akpm's change above]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: al <al@dizzy.pdmi.ras.ru>
Thomas Gleixner [Sun, 16 Aug 2009 21:05:08 +0000 (21:05 +0000)]
fs: Make unload_nls() NULL pointer safe
Most call sites of unload_nls() do:
if (nls)
unload_nls(nls);
Check the pointer inside unload_nls() like we do in kfree() and
simplify the call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 3 Aug 2009 21:28:35 +0000 (23:28 +0200)]
freeze_bdev: grab active reference to frozen superblocks
Currently we held s_umount while a filesystem is frozen, despite that we
might return to userspace and unlock it from a different process. Instead
grab an active reference to keep the file system busy and add an explicit
check for frozen filesystems in remount and reject the remount instead
of blocking on s_umount.
Add a new get_active_super helper to super.c for use by freeze_bdev that
grabs an active reference to a superblock from a given block device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Mon, 3 Aug 2009 21:28:06 +0000 (23:28 +0200)]
freeze_bdev: kill bd_mount_sem
Now that we have the freeze count there is not much reason for bd_mount_sem
anymore. The actual freeze/thaw operations are serialized using the
bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is
get_sb_bdev which tries to prevent mounting a filesystem while the block
device is frozen. Instead of add a check for bd_fsfreeze_count and
return -EBUSY if a filesystem is frozen. While that is a change in user
visible behaviour a failing mount is much better for this case rather
than having the mount process stuck uninterruptible for a long time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Boaz Harrosh [Wed, 19 Aug 2009 14:56:46 +0000 (17:56 +0300)]
exofs: remove BKL from super operations
the two places inside exofs that where taking the BKL were:
exofs_put_super() - .put_super
and
exofs_sync_fs() - which is .sync_fs and is also called from
.write_super.
Now exofs_sync_fs() is protected from itself by also taking
the sb_lock.
exofs_put_super() directly calls exofs_sync_fs() so there is no
danger between these two either.
In anyway there is absolutely nothing dangerous been done
inside exofs_sync_fs().
Unless there is some subtle race with the actual lifetime of
the super_block in regard to .put_super and some other parts
of the VFS. Which is highly unlikely.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Julia Lawall [Tue, 28 Jul 2009 15:54:58 +0000 (17:54 +0200)]
fs/romfs: correct error-handling code
romfs_fill_super() assumes that romfs_iget() returns NULL when
it fails. romfs_iget() actually returns ERR_PTR(-ve) in that
case...
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Mon, 21 Sep 2009 12:48:36 +0000 (14:48 +0200)]
vfs: seq_file: add helpers for data filling
Add two helpers that allow access to the seq_file's own buffer, but
hide the internal details of seq_files.
This allows easier implementation of special purpose filling
functions. It also cleans up some existing functions which duplicated
the seq_file logic.
Make these inline functions in seq_file.h, as suggested by Al.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jeff Layton [Fri, 18 Sep 2009 20:05:53 +0000 (13:05 -0700)]
vfs: remove redundant position check in do_sendfile
As Johannes Weiner pointed out, one of the range checks in do_sendfile
is redundant and is already checked in rw_verify_area.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Robert Love <rlove@google.com>
Cc: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jeff Layton [Fri, 18 Sep 2009 20:05:53 +0000 (13:05 -0700)]
vfs: change sb->s_maxbytes to a loff_t
sb->s_maxbytes is supposed to indicate the maximum size of a file that can
exist on the filesystem. It's declared as an unsigned long long.
Even if a filesystem has no inherent limit that prevents it from using
every bit in that unsigned long long, it's still problematic to set it to
anything larger than MAX_LFS_FILESIZE. There are places in the kernel
that cast s_maxbytes to a signed value. If it's set too large then this
cast makes it a negative number and generally breaks the comparison.
Change s_maxbytes to be loff_t instead. That should help eliminate the
temptation to set it too large by making it a signed value.
Also, add a warning for couple of releases to help catch filesystems that
set s_maxbytes too large. Eventually we can either convert this to a
BUG() or just remove it and in the hope that no one will get it wrong now
that it's a signed value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Robert Love <rlove@google.com>
Cc: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jeff Layton [Fri, 18 Sep 2009 20:05:50 +0000 (13:05 -0700)]
vfs: explicitly cast s_maxbytes in fiemap_check_ranges
If fiemap_check_ranges is passed a large enough value, then it's
possible that the value would be cast to a signed value for comparison
against s_maxbytes when we change it to loff_t. Make sure that doesn't
happen by explicitly casting s_maxbytes to an unsigned value for the
purposes of comparison.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robert Love <rlove@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Wu Fengguang [Fri, 18 Sep 2009 20:06:03 +0000 (13:06 -0700)]
libfs: return error code on failed attr set
Currently all simple_attr.set handlers return 0 on success and negative
codes on error. Fix simple_attr_write() to return these error codes.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tetsuo Handa [Fri, 18 Sep 2009 20:05:59 +0000 (13:05 -0700)]
seq_file: return a negative error code when seq_path_root() fails.
seq_path_root() is returning a return value of successful __d_path()
instead of returning a negative value when mangle_path() failed.
This is not a bug so far because nobody is using return value of
seq_path_root().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andi Kleen [Fri, 18 Sep 2009 20:05:48 +0000 (13:05 -0700)]
vfs: optimize touch_time() too
Do a similar optimization as earlier for touch_atime. Getting the lock in
mnt_get_write is relatively costly, so try all avenues to avoid it first.
This patch is careful to still only update inode fields inside the lock
region.
This didn't show up in benchmarks, but it's easy enough to do.
[akpm@linux-foundation.org: fix typo in comment]
[hugh.dickins@tiscali.co.uk: fix inverted test of mnt_want_write_file()]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Valerie Aurora <vaurora@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andi Kleen [Fri, 18 Sep 2009 20:05:47 +0000 (13:05 -0700)]
vfs: optimization for touch_atime()
Some benchmark testing shows touch_atime to be high up in profile logs for
IO intensive workloads. Most likely that's due to the lock in
mnt_want_write(). Unfortunately touch_atime first takes the lock, and
then does all the other tests that could avoid atime updates (like noatime
or relatime).
Do it the other way round -- first try to avoid the update and only then
if that didn't succeed take the lock. That works because none of the
atime avoidance tests rely on locking.
This also eliminates a goto.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Valerie Aurora <vaurora@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jan Kara [Fri, 18 Sep 2009 20:05:44 +0000 (13:05 -0700)]
vfs: split generic_forget_inode() so that hugetlbfs does not have to copy it
Hugetlbfs needs to do special things instead of truncate_inode_pages().
Currently, it copied generic_forget_inode() except for
truncate_inode_pages() call which is asking for trouble (the code there
isn't trivial). So create a separate function generic_detach_inode()
which does all the list magic done in generic_forget_inode() and call
it from hugetlbfs_forget_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Manish Katiyar [Fri, 18 Sep 2009 20:05:43 +0000 (13:05 -0700)]
fs/inode.c: add dev-id and inode number for debugging in init_special_inode()
Add device-id and inode number for better debugging. This was suggested
by Andreas in one of the threads
http://article.gmane.org/gmane.comp.file-systems.ext4/12062 .
"If anyone has a chance, fixing this error message to be not-useless would
be good... Including the device name and the inode number would help
track down the source of the problem."
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Steven Rostedt [Fri, 18 Sep 2009 20:05:42 +0000 (13:05 -0700)]
libfs: make simple_read_from_buffer conventional
Impact: have simple_read_from_buffer conform to standards
It was brought to my attention by Andrew Morton, Theodore Tso, and H.
Peter Anvin that a read from userspace should only return -EFAULT if
nothing was actually read.
Looking at the simple_read_from_buffer I noticed that this function does
not conform to that rule. This patch fixes that function.
[akpm@linux-foundation.org: simplification suggested by hpa]
[hpa@zytor.com: fix count==0 handling]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Paul Mundt [Thu, 24 Sep 2009 08:48:15 +0000 (17:48 +0900)]
sh: Fix up uninitialized variable use caught by gcc 4.4.
In the unaligned kernel exception fixup case the printk() was ordered
before the copy_from_user(), resulting in a nonsensical instruction
value. This fixes up the ordering properly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 24 Sep 2009 08:38:18 +0000 (17:38 +0900)]
sh: Handle unaligned 16-bit instructions on SH-2A.
This adds some sanity checking in the unaligned instruction handler to
verify the instruction size, which enables basic support for 16-bit
fixups on SH-2A parts.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Michal Simek [Tue, 22 Sep 2009 08:32:33 +0000 (10:32 +0200)]
microblaze: Disable heartbeat/enable emaclite in defconfigs
I need to disable heartbeat function because this features
breaks testing in Qemu.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 14 Sep 2009 13:15:49 +0000 (15:15 +0200)]
microblaze: Support simpleImage.dts make target
Instead of remembering to specify DTB= on the make commandline, this commit
allows the much friendlier make simpleImage.<dts>
where <dts>.dts is expected to be found in arch/microblaze/boot/dts/
The resulting vmlinux, with the compiled DTS linked in, will be copied to
boot/simpleImage.<dts>
This mirrors the same functionality as on PowerPC,
albeit achieving it in a slightly different way.
+ strip simpleImage file
The size of output file is very similar to linux.bin.
vmlinux - full elf without fdt blob
simpleImage.<dtb name>.unstrip - full elf with fdt blob
simpleImage.<dtb name> - stripped elf with fdt blob
Add symlink to generic system.dts in platform folder
Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
git.samba.org / sfrench / cifs-2.6.git / log