sfrench/cifs-2.6.git
10 months agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Greg Kroah-Hartman [Sat, 20 Oct 2018 06:42:56 +0000 (08:42 +0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Dmitry writes:
  "Input updates for 4.19-rc8

   Just an addition to elan touchpad driver ACPI table."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM

10 months agoMerge tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Greg Kroah-Hartman [Fri, 19 Oct 2018 17:25:44 +0000 (19:25 +0200)]
Merge tag 'usb-4.19-final' of git://git./linux/kernel/git/gregkh/usb

I wrote:
  "USB fixes for 4.19-final

   Here are a small number of last-minute USB driver fixes

   Included here are:
     - spectre fix for usb storage gadgets
     - xhci fixes
     - cdc-acm fixes
     - usbip fixes for reported problems

   All of these have been in linux-next with no reported issues."

* tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: storage: Fix Spectre v1 vulnerability
  USB: fix the usbfs flag sanitization for control transfers
  usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms
  usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable
  cdc-acm: correct counting of UART states in serial state notification
  cdc-acm: do not reset notification buffer index upon urb unlinking
  cdc-acm: fix race between reset and control messaging
  usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()
  selftests: usbip: add wait after attach and before checking port status

10 months agoMerge tag 'for-linus-20181019' of git://git.kernel.dk/linux-block
Greg Kroah-Hartman [Fri, 19 Oct 2018 16:51:07 +0000 (18:51 +0200)]
Merge tag 'for-linus-20181019' of git://git.kernel.dk/linux-block

Jens writes:
  "Block fixes for 4.19-final

   Two small fixes that should go into this release."

* tag 'for-linus-20181019' of git://git.kernel.dk/linux-block:
  block: don't deal with discard limit in blkdev_issue_discard()
  nvme: remove ns sibling before clearing path

10 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Greg Kroah-Hartman [Fri, 19 Oct 2018 07:16:20 +0000 (09:16 +0200)]
Merge git://git./linux/kernel/git/davem/net

David writes:
  "Networking

   1) Fix gro_cells leak in xfrm layer, from Li RongQing.

   2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that.  From
      Eric Dumazet.

   3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
      Töpel.

   4) Out of bounds packet access in _decode_session6(), from Alexei
      Starovoitov.

   5) Several ethtool bugs, where we copy a struct into the kernel twice
      and our validations of the values in the first copy can be
      invalidated by the second copy due to asynchronous updates to the
      memory by the user.  From Wenwen Wang.

   6) Missing netlink attribute validation in cls_api, from Davide
      Caratti.

   7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.

   8) rxrpc operates on wrong kvec, from Yue Haibing.

   9) A regression was introduced by the disassosciation of route
      neighbour references in rt6_probe(), causing probe for
      neighbourless routes to not be properly rate limited.  Fix from
      Sabrina Dubroca.

   10) Unsafe RCU locking in tipc, from Tung Nguyen.

   11) Use after free in inet6_mc_check(), from Eric Dumazet.

   12) PMTU from icmp packets should update the SCTP transport pathmtu,
       from Xin Long.

   13) Missing peer put on error in rxrpc, from David Howells.

   14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.

   15) Fix overflowing shift statement in qla3xxx driver, from Nathan
       Chancellor.

   16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.

   17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
       value in an inverted manner, fix from Paolo Abeni.

   18) Fix missed unresolved entries in ipmr dumps, from Nikolay
       Aleksandrov.

   19) Fix NAPI handling under high load, we can completely miss events
       when NAPI has to loop more than one time in a cycle.  From Heiner
       Kallweit."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
  ip6_tunnel: Fix encapsulation layout
  tipc: fix info leak from kernel tipc_event
  net: socket: fix a missing-check bug
  net: sched: Fix for duplicate class dump
  r8169: fix NAPI handling under high load
  net: ipmr: fix unresolved entry dumps
  net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
  sctp: fix the data size calculation in sctp_data_size
  virtio_net: avoid using netif_tx_disable() for serializing tx routine
  udp6: fix encap return code for resubmitting
  mlxsw: core: Fix use-after-free when flashing firmware during init
  sctp: not free the new asoc when sctp_wait_for_connect returns err
  sctp: fix race on sctp_id2asoc
  r8169: re-enable MSI-X on RTL8168g
  net: bpfilter: use get_pid_task instead of pid_task
  ptp: fix Spectre v1 vulnerability
  net: qla3xxx: Remove overflowing shift statement
  geneve, vxlan: Don't set exceptions if skb->len < mtu
  geneve, vxlan: Don't check skb_dst() twice
  sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
  ...

10 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Greg Kroah-Hartman [Fri, 19 Oct 2018 07:15:12 +0000 (09:15 +0200)]
Merge git://git./linux/kernel/git/davem/sparc

David writes:
  "Sparc fixes:

   The main bit here is fixing how fallback system calls are handled in
   the sparc vDSO.

   Unfortunately, I fat fingered the commit and some perf debugging
   hacks slipped into the vDSO fix, which I revert in the very next
   commit."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Revert unintended perf changes.
  sparc: vDSO: Silence an uninitialized variable warning
  sparc: Fix syscall fallback bugs in VDSO.

10 months agoMerge tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm
Greg Kroah-Hartman [Fri, 19 Oct 2018 06:31:22 +0000 (08:31 +0200)]
Merge tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm

Dave writes:
  "drm fixes for 4.19 final

   Just a last set of misc core fixes for final.

   4 fixes, one use after free, one fb integration fix, one EDID fix,
   and one laptop panel quirk,"

* tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm:
  drm/edid: VSDB yCBCr420 Deep Color mode bit definitions
  drm: fix use of freed memory in drm_mode_setcrtc
  drm: fb-helper: Reject all pixel format changing requests
  drm/edid: Add 6 bpc quirk for BOE panel in HP Pavilion 15-n233sl

10 months agoMerge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Greg Kroah-Hartman [Fri, 19 Oct 2018 06:30:35 +0000 (08:30 +0200)]
Merge tag 'for-gkh' of git://git./linux/kernel/git/rdma/rdma

Doug writes:
  "Really final for-rc pull request for 4.19

   Ok, so last week I thought we had sent our final pull request for
   4.19.  Well, wouldn't ya know someone went and found a couple Spectre
   v1 fixes were needed :-/.  So, a couple *very* small specter patches
   for this (hopefully) final -rc week."

* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/ucma: Fix Spectre v1 vulnerability
  IB/ucm: Fix Spectre v1 vulnerability

10 months agoMerge tag 'drm-misc-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Fri, 19 Oct 2018 03:51:55 +0000 (13:51 +1000)]
Merge tag 'drm-misc-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v4.19:
- Fix use of freed memory in drm_mode_setcrtc.
- Reject pixel format changing requests in fb helper.
- Add 6 bpc quirk for HP Pavilion 15-n233sl
- Fix VSDB yCBCr420 Deep Color mode bit definitions

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/647fe5d0-4ec5-57cc-9f23-a4836b29e278@linux.intel.com
10 months agoip6_tunnel: Fix encapsulation layout
Stefano Brivio [Thu, 18 Oct 2018 19:25:07 +0000 (21:25 +0200)]
ip6_tunnel: Fix encapsulation layout

Commit 058214a4d1df ("ip6_tun: Add infrastructure for doing
encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before
the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation
Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header.

As long as the option didn't actually end up in generated packets, this
wasn't an issue. Then commit 89a23c8b528b ("ip6_tunnel: Fix missing tunnel
encapsulation limit option") fixed sending of this option, and the
resulting layout, e.g. for FoU, is:

.-------------------.------------.----------.-------------------.----- - -
| Outer IPv6 Header | UDP header | Option 4 | Inner IPv6 Header | Payload
'-------------------'------------'----------'-------------------'----- - -

Needless to say, FoU and GUE (at least) won't work over IPv6. The option
is appended by default, and I couldn't find a way to disable it with the
current iproute2.

Turn this into a more reasonable:

.-------------------.----------.------------.-------------------.----- - -
| Outer IPv6 Header | Option 4 | UDP header | Inner IPv6 Header | Payload
'-------------------'----------'------------'-------------------'----- - -

With this, and with 84dad55951b0 ("udp6: fix encap return code for
resubmitting"), FoU and GUE work again over IPv6.

Fixes: 058214a4d1df ("ip6_tun: Add infrastructure for doing encapsulation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agotipc: fix info leak from kernel tipc_event
Jon Maloy [Thu, 18 Oct 2018 15:38:29 +0000 (17:38 +0200)]
tipc: fix info leak from kernel tipc_event

We initialize a struct tipc_event allocated on the kernel stack to
zero to avert info leak to user space.

Reported-by: syzbot+057458894bc8cada4dee@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agonet: socket: fix a missing-check bug
Wenwen Wang [Thu, 18 Oct 2018 14:36:46 +0000 (09:36 -0500)]
net: socket: fix a missing-check bug

In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.

This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agonet: sched: Fix for duplicate class dump
Phil Sutter [Thu, 18 Oct 2018 08:34:26 +0000 (10:34 +0200)]
net: sched: Fix for duplicate class dump

When dumping classes by parent, kernel would return classes twice:

| # tc qdisc add dev lo root prio
| # tc class show dev lo
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| # tc class show dev lo parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:

This comes from qdisc_match_from_root() potentially returning the root
qdisc itself if its handle matched. Though in that case, root's classes
were already dumped a few lines above.

Fixes: cb395b2010879 ("net: sched: optimize class dumps")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agor8169: fix NAPI handling under high load
Heiner Kallweit [Thu, 18 Oct 2018 17:56:01 +0000 (19:56 +0200)]
r8169: fix NAPI handling under high load

rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.

Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.

Fixes: da78dbff2e05 ("r8169: remove work from irq handler.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosparc: Revert unintended perf changes.
David S. Miller [Thu, 18 Oct 2018 18:32:29 +0000 (11:32 -0700)]
sparc: Revert unintended perf changes.

Some local debugging hacks accidently slipped into the VDSO commit.

Sorry!

Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
David S. Miller [Thu, 18 Oct 2018 16:55:08 +0000 (09:55 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2018-10-18

1) Free the xfrm interface gro_cells when deleting the
   interface, otherwise we leak it. From Li RongQing.

2) net/core/flow.c does not exist anymore, so remove it
   from the MAINTAINERS file.

3) Fix a slab-out-of-bounds in _decode_session6.
   From Alexei Starovoitov.

4) Fix RCU protection when policies inserted into
   thei bydst lists. From Florian Westphal.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agoblock: don't deal with discard limit in blkdev_issue_discard()
Ming Lei [Fri, 12 Oct 2018 07:53:10 +0000 (15:53 +0800)]
block: don't deal with discard limit in blkdev_issue_discard()

blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).

More importantly, this patch fixes one issue introduced in a22c4d7e34402cc
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.

Fixes: a22c4d7e34402ccdf3 ("block: re-add discard_granularity and alignment checks")
Cc: stable@vger.kernel.org
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
10 months agofscache: Fix out of bound read in long cookie keys
Eric Sandeen [Wed, 17 Oct 2018 14:23:59 +0000 (15:23 +0100)]
fscache: Fix out of bound read in long cookie keys

fscache_set_key() can incur an out-of-bounds read, reported by KASAN:

 BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache]
 Read of size 4 at addr ffff88084ff056d4 by task mount.nfs/32615

and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236

  BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline]
  BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171
  Read of size 4 at addr ffff8801d3cc8bb4 by task syz-executor907/4466

This happens for any index_key_len which is not divisible by 4 and is
larger than the size of the inline key, because the code allocates exactly
index_key_len for the key buffer, but the hashing loop is stepping through
it 4 bytes (u32) at a time in the buf[] array.

Fix this by calculating how many u32 buffers we'll need by using
DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation
buffer to hold the index_key, then using that same count as the hashing
index limit.

Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agofscache: Fix incomplete initialisation of inline key space
David Howells [Wed, 17 Oct 2018 14:23:45 +0000 (15:23 +0100)]
fscache: Fix incomplete initialisation of inline key space

The inline key in struct rxrpc_cookie is insufficiently initialized,
zeroing only 3 of the 4 slots, therefore an index_key_len between 13 and 15
bytes will end up hashing uninitialized memory because the memcpy only
partially fills the last buf[] element.

Fix this by clearing fscache_cookie objects on allocation rather than using
the slab constructor to initialise them.  We're going to pretty much fill
in the entire struct anyway, so bringing it into our dcache writably
shouldn't incur much overhead.

This removes the need to do clearance in fscache_set_key() (where we aren't
doing it correctly anyway).

Also, we don't need to set cookie->key_len in fscache_set_key() as we
already did it in the only caller, so remove that.

Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Reported-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agocachefiles: fix the race between cachefiles_bury_object() and rmdir(2)
Al Viro [Wed, 17 Oct 2018 14:23:26 +0000 (15:23 +0100)]
cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)

the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent.  Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc.  So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.

The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.

Cc: stable@vger.kernel.org
Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agomremap: properly flush TLB before releasing the page
Linus Torvalds [Fri, 12 Oct 2018 22:22:59 +0000 (15:22 -0700)]
mremap: properly flush TLB before releasing the page

Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case.  What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages".  No, mremap() obviously just _moves_ the page from one page
table location to another.

That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.

As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).

This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agoLICENSES: Remove CC-BY-SA-4.0 license text
Christoph Hellwig [Thu, 18 Oct 2018 06:22:39 +0000 (08:22 +0200)]
LICENSES: Remove CC-BY-SA-4.0 license text

Using non-GPL licenses for our documentation is rather problematic,
as it can directly include other files, which generally are GPLv2
licensed and thus not compatible.

Remove this license now that the only user (idr.rst) is gone to avoid
people semi-accidentally using it again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agoMerge branch 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax
Greg Kroah-Hartman [Thu, 18 Oct 2018 09:24:32 +0000 (11:24 +0200)]
Merge branch 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax

Matthew writes:
  "IDA/IDR fixes for 4.19

   I have two tiny fixes, one for the IDA test-suite and one for the IDR
   documentation license."

* 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax:
  idr: Change documentation license
  test_ida: Fix lockdep warning

10 months agonet: ipmr: fix unresolved entry dumps
Nikolay Aleksandrov [Wed, 17 Oct 2018 19:34:34 +0000 (22:34 +0300)]
net: ipmr: fix unresolved entry dumps

If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 8fb472c09b9d ("ipmr: improve hash scalability")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agonet: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
Gregory CLEMENT [Wed, 17 Oct 2018 15:26:35 +0000 (17:26 +0200)]
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()

The ocelot_vlant_wait_for_completion() function is very similar to the
ocelot_mact_wait_for_completion(). It seemed to have be copied but the
comment was not updated, so let's fix it.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosctp: fix the data size calculation in sctp_data_size
Xin Long [Wed, 17 Oct 2018 13:11:27 +0000 (21:11 +0800)]
sctp: fix the data size calculation in sctp_data_size

sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.

Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agovirtio_net: avoid using netif_tx_disable() for serializing tx routine
Ake Koomsin [Wed, 17 Oct 2018 10:44:12 +0000 (19:44 +0900)]
virtio_net: avoid using netif_tx_disable() for serializing tx routine

Commit 713a98d90c5e ("virtio-net: serialize tx routine during reset")
introduces netif_tx_disable() after netif_device_detach() in order to
avoid use-after-free of tx queues. However, there are two issues.

1) Its operation is redundant with netif_device_detach() in case the
   interface is running.
2) In case of the interface is not running before suspending and
   resuming, the tx does not get resumed by netif_device_attach().
   This results in losing network connectivity.

It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for
serializing tx routine during reset. This also preserves the symmetry
of netif_device_detach() and netif_device_attach().

Fixes commit 713a98d90c5e ("virtio-net: serialize tx routine during reset")
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agoMerge tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Greg Kroah-Hartman [Thu, 18 Oct 2018 05:29:05 +0000 (07:29 +0200)]
Merge tag 'trace-v4.19-rc8' of git://git./linux/kernel/git/rostedt/linux-trace

Steven writes:
  "tracing: Two fixes for 4.19

   This fixes two bugs:
    - Fix size mismatch of tracepoint array
    - Have preemptirq test module use same clock source of the selftest"

* tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
  tracepoint: Fix tracepoint array element size mismatch

10 months agoudp6: fix encap return code for resubmitting
Paolo Abeni [Wed, 17 Oct 2018 09:44:04 +0000 (11:44 +0200)]
udp6: fix encap return code for resubmitting

The commit eb63f2964dbe ("udp6: add missing checks on edumux packet
processing") used the same return code convention of the ipv4 counterpart,
but ipv6 uses the opposite one: positive values means resubmit.

This change addresses the issue, using positive return value for
resubmitting. Also update the related comment, which was broken, too.

Fixes: eb63f2964dbe ("udp6: add missing checks on edumux packet processing")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agomlxsw: core: Fix use-after-free when flashing firmware during init
Ido Schimmel [Wed, 17 Oct 2018 08:05:45 +0000 (08:05 +0000)]
mlxsw: core: Fix use-after-free when flashing firmware during init

When the switch driver (e.g., mlxsw_spectrum) determines it needs to
flash a new firmware version it resets the ASIC after the flashing
process. The bus driver (e.g., mlxsw_pci) then registers itself again
with mlxsw_core which means (among other things) that the device
registers itself again with the hwmon subsystem again.

Since the device was registered with the hwmon subsystem using
devm_hwmon_device_register_with_groups(), then the old hwmon device
(registered before the flashing) was never unregistered and was
referencing stale data, resulting in a use-after free.

Fix by removing reliance on device managed APIs in mlxsw_hwmon_init().

Fixes: c86d62cc410c ("mlxsw: spectrum: Reset FW after flash")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosctp: not free the new asoc when sctp_wait_for_connect returns err
Xin Long [Tue, 16 Oct 2018 19:06:12 +0000 (03:06 +0800)]
sctp: not free the new asoc when sctp_wait_for_connect returns err

When sctp_wait_for_connect is called to wait for connect ready
for sp->strm_interleave in sctp_sendmsg_to_asoc, a panic could
be triggered if cpu is scheduled out and the new asoc is freed
elsewhere, as it will return err and later the asoc gets freed
again in sctp_sendmsg.

[  285.840764] list_del corruption, ffff9f0f7b284078->next is LIST_POISON1 (dead000000000100)
[  285.843590] WARNING: CPU: 1 PID: 8861 at lib/list_debug.c:47 __list_del_entry_valid+0x50/0xa0
[  285.846193] Kernel panic - not syncing: panic_on_warn set ...
[  285.846193]
[  285.848206] CPU: 1 PID: 8861 Comm: sctp_ndata Kdump: loaded Not tainted 4.19.0-rc7.label #584
[  285.850559] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  285.852164] Call Trace:
...
[  285.872210]  ? __list_del_entry_valid+0x50/0xa0
[  285.872894]  sctp_association_free+0x42/0x2d0 [sctp]
[  285.873612]  sctp_sendmsg+0x5a4/0x6b0 [sctp]
[  285.874236]  sock_sendmsg+0x30/0x40
[  285.874741]  ___sys_sendmsg+0x27a/0x290
[  285.875304]  ? __switch_to_asm+0x34/0x70
[  285.875872]  ? __switch_to_asm+0x40/0x70
[  285.876438]  ? ptep_set_access_flags+0x2a/0x30
[  285.877083]  ? do_wp_page+0x151/0x540
[  285.877614]  __sys_sendmsg+0x58/0xa0
[  285.878138]  do_syscall_64+0x55/0x180
[  285.878669]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is a similar issue with the one fixed in Commit ca3af4dd28cf
("sctp: do not free asoc when it is already dead in sctp_sendmsg").
But this one can't be fixed by returning -ESRCH for the dead asoc
in sctp_wait_for_connect, as it will break sctp_connect's return
value to users.

This patch is to simply set err to -ESRCH before it returns to
sctp_sendmsg when any err is returned by sctp_wait_for_connect
for sp->strm_interleave, so that no asoc would be freed due to
this.

When users see this error, they will know the packet hasn't been
sent. And it also makes sense to not free asoc because waiting
connect fails, like the second call for sctp_wait_for_connect in
sctp_sendmsg_to_asoc.

Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosctp: fix race on sctp_id2asoc
Marcelo Ricardo Leitner [Tue, 16 Oct 2018 18:18:17 +0000 (15:18 -0300)]
sctp: fix race on sctp_id2asoc

syzbot reported an use-after-free involving sctp_id2asoc.  Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:

        CPU 1                       CPU 2
(working on socket 1)            (working on socket 2)
                         sctp_association_destroy
sctp_id2asoc
   spin lock
     grab the asoc from idr
   spin unlock
                                   spin lock
     remove asoc from idr
   spin unlock
   free(asoc)
   if asoc->base.sk != sk ... [*]

This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).

We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.

Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agor8169: re-enable MSI-X on RTL8168g
Heiner Kallweit [Tue, 16 Oct 2018 17:35:17 +0000 (19:35 +0200)]
r8169: re-enable MSI-X on RTL8168g

Similar to d49c88d7677b ("r8169: Enable MSI-X on RTL8106e") after
e9d0ba506ea8 ("PCI: Reprogram bridge prefetch registers on resume")
we can safely assume that this also fixes the root cause of
the issue worked around by 7c53a722459c ("r8169: don't use MSI-X on
RTL8168g"). So let's revert it.

Fixes: 7c53a722459c ("r8169: don't use MSI-X on RTL8168g")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agonet: bpfilter: use get_pid_task instead of pid_task
Taehee Yoo [Tue, 16 Oct 2018 15:35:10 +0000 (00:35 +0900)]
net: bpfilter: use get_pid_task instead of pid_task

pid_task() dereferences rcu protected tasks array.
But there is no rcu_read_lock() in shutdown_umh() routine so that
rcu_read_lock() is needed.
get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock()
then calls pid_task(). if task isn't NULL, it increases reference count
of task.

test commands:
   %modprobe bpfilter
   %modprobe -rv bpfilter

splat looks like:
[15102.030932] =============================
[15102.030957] WARNING: suspicious RCU usage
[15102.030985] 4.19.0-rc7+ #21 Not tainted
[15102.031010] -----------------------------
[15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage!
[15102.031063]
       other info that might help us debug this:

[15102.031332]
       rcu_scheduler_active = 2, debug_locks = 1
[15102.031363] 1 lock held by modprobe/1570:
[15102.031389]  #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter]
[15102.031552]
               stack backtrace:
[15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21
[15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[15102.031628] Call Trace:
[15102.031676]  dump_stack+0xc9/0x16b
[15102.031723]  ? show_regs_print_info+0x5/0x5
[15102.031801]  ? lockdep_rcu_suspicious+0x117/0x160
[15102.031855]  pid_task+0x134/0x160
[15102.031900]  ? find_vpid+0xf0/0xf0
[15102.032017]  shutdown_umh.constprop.1+0x1e/0x53 [bpfilter]
[15102.032055]  stop_umh+0x46/0x52 [bpfilter]
[15102.032092]  __x64_sys_delete_module+0x47e/0x570
[ ... ]

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agoptp: fix Spectre v1 vulnerability
Gustavo A. R. Silva [Tue, 16 Oct 2018 13:06:41 +0000 (15:06 +0200)]
ptp: fix Spectre v1 vulnerability

pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)

Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosparc: vDSO: Silence an uninitialized variable warning
Dan Carpenter [Sat, 13 Oct 2018 10:26:53 +0000 (13:26 +0300)]
sparc: vDSO: Silence an uninitialized variable warning

Smatch complains that "val" would be uninitialized if kstrtoul() fails.

Fixes: 9a08862a5d2e ("vDSO for sparc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agonet: qla3xxx: Remove overflowing shift statement
Nathan Chancellor [Sat, 13 Oct 2018 02:14:58 +0000 (19:14 -0700)]
net: qla3xxx: Remove overflowing shift statement

Clang currently warns:

drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
                    ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
                      ~~~~~~~~~~~~~~ ^  ~~
1 warning generated.

The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.

Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.

Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agoMerge branch 'geneve-vxlan-mtu'
David S. Miller [Thu, 18 Oct 2018 04:51:14 +0000 (21:51 -0700)]
Merge branch 'geneve-vxlan-mtu'

Stefano Brivio says:

====================
geneve, vxlan: Don't set exceptions if skb->len < mtu

This series fixes the exception abuse described in 2/2, and 1/2
is just a preparatory change to make 2/2 less ugly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agogeneve, vxlan: Don't set exceptions if skb->len < mtu
Stefano Brivio [Fri, 12 Oct 2018 21:53:59 +0000 (23:53 +0200)]
geneve, vxlan: Don't set exceptions if skb->len < mtu

We shouldn't abuse exceptions: if the destination MTU is already higher
than what we're transmitting, no exception should be created.

Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agogeneve, vxlan: Don't check skb_dst() twice
Stefano Brivio [Fri, 12 Oct 2018 21:53:58 +0000 (23:53 +0200)]
geneve, vxlan: Don't check skb_dst() twice

Commit f15ca723c1eb ("net: don't call update_pmtu unconditionally") avoids
that we try updating PMTU for a non-existent destination, but didn't clean
up cases where the check was already explicit. Drop those redundant checks.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agosparc: Fix syscall fallback bugs in VDSO.
David S. Miller [Thu, 18 Oct 2018 04:28:01 +0000 (21:28 -0700)]
sparc: Fix syscall fallback bugs in VDSO.

First, the trap number for 32-bit syscalls is 0x10.

Also, only negate the return value when syscall error is indicated by
the carry bit being set.

Signed-off-by: David S. Miller <davem@davemloft.net>
10 months agotracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
Steven Rostedt (VMware) [Tue, 16 Oct 2018 03:31:42 +0000 (23:31 -0400)]
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c

The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.

Cc: stable@vger.kernel.org
Fixes: f96e8577da102 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
10 months agotracepoint: Fix tracepoint array element size mismatch
Mathieu Desnoyers [Sat, 13 Oct 2018 19:10:50 +0000 (15:10 -0400)]
tracepoint: Fix tracepoint array element size mismatch

commit 46e0c9be206f ("kernel: tracepoints: add support for relative
references") changes the layout of the __tracepoint_ptrs section on
architectures supporting relative references. However, it does so
without turning struct tracepoint * const into const int elsewhere in
the tracepoint code, which has the following side-effect:

Setting mod->num_tracepoints is done in by module.c:

    mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs",
                                         sizeof(*mod->tracepoints_ptrs),
                                         &mod->num_tracepoints);

Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size
(rather than sizeof(int)), num_tracepoints is erroneously set to half the
size it should be on 64-bit arch. So a module with an odd number of
tracepoints misses the last tracepoint due to effect of integer
division.

So in the module going notifier:

        for_each_tracepoint_range(mod->tracepoints_ptrs,
                mod->tracepoints_ptrs + mod->num_tracepoints,
                tp_module_going_check_quiescent, NULL);

the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually
evaluates to something within the bounds of the array, but miss the
last tracepoint if the number of tracepoints is odd on 64-bit arch.

Fix this by introducing a new typedef: tracepoint_ptr_t, which
is either "const int" on architectures that have PREL32 relocations,
or "struct tracepoint * const" on architectures that does not have
this feature.

Also provide a new tracepoint_ptr_defer() static inline to
encapsulate deferencing this type rather than duplicate code and
ugly idefs within the for_each_tracepoint_range() implementation.

This issue appears in 4.19-rc kernels, and should ideally be fixed
before the end of the rc cycle.

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
10 months agousb: gadget: storage: Fix Spectre v1 vulnerability
Gustavo A. R. Silva [Tue, 16 Oct 2018 10:16:45 +0000 (12:16 +0200)]
usb: gadget: storage: Fix Spectre v1 vulnerability

num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)

Fix this by sanitizing num before using it to index
fsg_opts->common->luns

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 months agoMerge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus
Jens Axboe [Wed, 17 Oct 2018 15:45:49 +0000 (09:45 -0600)]
Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus

Pull single NVMe fix from Christoph.

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvme: remove ns sibling before clearing path

10 months agoMerge branch 'parisc-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Greg Kroah-Hartman [Wed, 17 Oct 2018 12:01:00 +0000 (14:01 +0200)]
Merge branch 'parisc-4.19-3' of git://git./linux/kernel/git/deller/parisc-linux

Helge writes:
   "parisc fix:

    Fix an unitialized variable usage in the parisc unwind code."

* 'parisc-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix uninitialized variable usage in unwind.c

10 months agoMerge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Wed, 17 Oct 2018 11:40:10 +0000 (13:40 +0200)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Stephen writes:
  "clk fixes for v4.19-rc8

   One fix for the Allwinner A10 SoC's audio PLL that wasn't properly
   set and generating noise."

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: sun4i: Set VCO and PLL bias current to lowest setting

11 months agosctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
Xin Long [Tue, 16 Oct 2018 07:52:02 +0000 (15:52 +0800)]
sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead

According to rfc7496 section 4.3 or 4.4:

   sprstat_policy:  This parameter indicates for which PR-SCTP policy
      the user wants the information.  It is an error to use
      SCTP_PR_SCTP_NONE in sprstat_policy.  If SCTP_PR_SCTP_ALL is used,
      the counters provided are aggregated over all supported policies.

We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL
instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is
an error to use SCTP_PR_SCTP_NONE in sprstat_policy. "

Fixes: 826d253d57b1 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt")
Fixes: d229d48d183f ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Greg Kroah-Hartman [Tue, 16 Oct 2018 16:53:31 +0000 (18:53 +0200)]
Merge git://git./linux/kernel/git/davem/sparc

David writes:
  "Sparc fixes

   1) Revert the %pOF change, it causes regressions.

   2) Wire up io_pgetevents().

   3) Fix perf events on single-PCR sparc64 cpus.

   4) Do proper perf event throttling like arm and x86."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  Revert "sparc: Convert to using %pOFn instead of device_node.name"
  sparc64: Set %l4 properly on trap return after handling signals.
  sparc64: Make proc_id signed.
  sparc: Throttle perf events properly.
  sparc: Fix single-pcr perf event counter management.
  sparc: Wire up io_pgetevents system call.
  sunvdc: Remove VLA usage

11 months agoMerge tag 'selinux-pr-20181015' of git://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Tue, 16 Oct 2018 16:52:00 +0000 (18:52 +0200)]
Merge tag 'selinux-pr-20181015' of git://git./linux/kernel/git/pcmoore/selinux

Paul writes:
  "SELinux fixes for v4.19

   We've got one SELinux "fix" that I'd like to get into v4.19 if
   possible.  I'm using double quotes on "fix" as this is just an update
   to the MAINTAINERS file and not a code change.  From my perspective,
   MAINTAINERS updates generally don't warrant inclusion during the -rcX
   phase, but this is a change to the mailing list location so it seemed
   prudent to get this in before v4.19 is released"

* tag 'selinux-pr-20181015' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  MAINTAINERS: update the SELinux mailing list location

11 months agoRDMA/ucma: Fix Spectre v1 vulnerability
Gustavo A. R. Silva [Tue, 16 Oct 2018 14:59:01 +0000 (16:59 +0200)]
RDMA/ucma: Fix Spectre v1 vulnerability

hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)

Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
11 months agoIB/ucm: Fix Spectre v1 vulnerability
Gustavo A. R. Silva [Tue, 16 Oct 2018 14:32:40 +0000 (16:32 +0200)]
IB/ucm: Fix Spectre v1 vulnerability

hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)

Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
11 months agodrm/edid: VSDB yCBCr420 Deep Color mode bit definitions
Clint Taylor [Fri, 5 Oct 2018 21:52:15 +0000 (14:52 -0700)]
drm/edid: VSDB yCBCr420 Deep Color mode bit definitions

HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct
definitions in the header for the mask to work correctly.

Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
11 months agoUSB: fix the usbfs flag sanitization for control transfers
Alan Stern [Mon, 15 Oct 2018 20:55:04 +0000 (16:55 -0400)]
USB: fix the usbfs flag sanitization for control transfers

Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the
transfer flags for URBs submitted from userspace via usbfs.  However,
the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be
allowed for a control transfer was added in the wrong place, before
the code has properly determined the direction of the control
transfer.  (Control transfers are special because for them, the
direction is set by the bRequestType byte of the Setup packet rather
than direction bit of the endpoint address.)

This patch moves code which sets up the allow_short flag for control
transfers down after is_in has been set to the correct value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com
Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more")
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agoparisc: Fix uninitialized variable usage in unwind.c
Helge Deller [Tue, 16 Oct 2018 06:21:48 +0000 (08:21 +0200)]
parisc: Fix uninitialized variable usage in unwind.c

As noticed by Dave Anglin, the last commit introduced a small bug where
the potentially uninitialized r struct is used instead of the regs
pointer as input for unwind_frame_init(). Fix it.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: John David Anglin <dave.anglin@bell.net>
11 months agoMerge branch 'nfp-fix-pedit-set-action-offloads'
David S. Miller [Tue, 16 Oct 2018 06:17:25 +0000 (23:17 -0700)]
Merge branch 'nfp-fix-pedit-set-action-offloads'

Jakub Kicinski says:

====================
nfp: fix pedit set action offloads

Pieter says:

This set fixes set actions when using multiple pedit actions with
partial masks and with multiple keys per pedit action. Additionally
it fixes set ipv6 pedit action offloads when using it in combination
with other header keys.

The problem would only trigger if one combines multiple pedit actions
of the same type with partial masks, e.g.:

$ tc filter add dev netdev protocol ip parent ffff: \
    flower indev netdev \
    ip_proto tcp \
    action pedit ex munge \
    ip src set 11.11.11.11 retain 65535 munge \
    ip src set 22.22.22.22 retain 4294901760 pipe \
    csum ip and tcp pipe \
    mirred egress redirect dev netdev
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonfp: flower: use offsets provided by pedit instead of index for ipv6
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:25 +0000 (16:52 -0700)]
nfp: flower: use offsets provided by pedit instead of index for ipv6

Previously when populating the set ipv6 address action, we incorrectly
made use of pedit's key index to determine which 32bit word should be
set. We now calculate which word has been selected based on the offset
provided by the pedit action.

Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonfp: flower: fix multiple keys per pedit action
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:24 +0000 (16:52 -0700)]
nfp: flower: fix multiple keys per pedit action

Previously we only allowed a single header key per pedit action to
change the header. This used to result in the last header key in the
pedit action to overwrite previous headers. We now keep track of them
and allow multiple header keys per pedit action.

Fixes: c0b1bd9a8b8a ("nfp: add set ipv4 header action flower offload")
Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address")
Fixes: f8b7b0a6b113 ("nfp: add set tcp and udp header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonfp: flower: fix pedit set actions for multiple partial masks
Pieter Jansen van Vuuren [Mon, 15 Oct 2018 23:52:23 +0000 (16:52 -0700)]
nfp: flower: fix pedit set actions for multiple partial masks

Previously we did not correctly change headers when using multiple
pedit actions with partial masks. We now take this into account and
no longer just commit the last pedit action.

Fixes: c0b1bd9a8b8a ("nfp: add set ipv4 header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agorxrpc: Fix a missing rxrpc_put_peer() in the error_report handler
David Howells [Mon, 15 Oct 2018 21:37:21 +0000 (22:37 +0100)]
rxrpc: Fix a missing rxrpc_put_peer() in the error_report handler

Fix a missing call to rxrpc_put_peer() on the main path through the
rxrpc_error_report() function.  This manifests itself as a ref leak
whenever an ICMP packet or other error comes in.

In commit f334430316e7, the hand-off of the ref to a work item was removed
and was not replaced with a put.

Fixes: f334430316e7 ("rxrpc: Fix error distribution")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agosctp: use the pmtu from the icmp packet to update transport pathmtu
Xin Long [Mon, 15 Oct 2018 11:58:29 +0000 (19:58 +0800)]
sctp: use the pmtu from the icmp packet to update transport pathmtu

Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.

The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.

Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.

Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonet: fec: don't dump RX FIFO register when not available
Fugang Duan [Mon, 15 Oct 2018 05:19:00 +0000 (05:19 +0000)]
net: fec: don't dump RX FIFO register when not available

Commit db65f35f50e0 ("net: fec: add support of ethtool get_regs") introduce
ethool "--register-dump" interface to dump all FEC registers.

But not all silicon implementations of the Freescale FEC hardware module
have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start
Register) register, so we should not be trying to dump them on those that
don't.

To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before
dump those RX FIFO registers.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoqed: fix spelling mistake "Ireelevant" -> "Irrelevant"
Colin Ian King [Sat, 13 Oct 2018 15:48:25 +0000 (16:48 +0100)]
qed: fix spelling mistake "Ireelevant" -> "Irrelevant"

Trivial fix to spelling mistake in DP_INFO message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoipv6: mcast: fix a use-after-free in inet6_mc_check
Eric Dumazet [Sat, 13 Oct 2018 01:58:53 +0000 (18:58 -0700)]
ipv6: mcast: fix a use-after-free in inet6_mc_check

syzbot found a use-after-free in inet6_mc_check [1]

The problem here is that inet6_mc_check() uses rcu
and read_lock(&iml->sflock)

So the fact that ip6_mc_leave_src() is called under RTNL
and the socket lock does not help us, we need to acquire
iml->sflock in write mode.

In the future, we should convert all this stuff to RCU.

[1]
BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline]
BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
Read of size 8 at addr ffff8801ce7f2510 by task syz-executor0/22432

CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 ipv6_addr_equal include/net/ipv6.h:521 [inline]
 inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
 __raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98
 ipv6_raw_deliver net/ipv6/raw.c:183 [inline]
 raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240
 ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426
 ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
 netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126
 napi_frags_finish net/core/dev.c:5664 [inline]
 napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737
 tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968
 call_write_iter include/linux/fs.h:1808 [inline]
 do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680
 do_iter_write+0x185/0x5f0 fs/read_write.c:959
 vfs_writev+0x1f1/0x360 fs/read_write.c:1004
 do_writev+0x11a/0x310 fs/read_write.c:1039
 __do_sys_writev fs/read_write.c:1112 [inline]
 __se_sys_writev fs/read_write.c:1109 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457421
Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007f2d30ecaba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 000000000000003e RCX: 0000000000457421
RDX: 0000000000000001 RSI: 00007f2d30ecabf0 RDI: 00000000000000f0
RBP: 0000000020000500 R08: 00000000000000f0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f2d30ecb6d4
R13: 00000000004c4890 R14: 00000000004d7b90 R15: 00000000ffffffff

Allocated by task 22437:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 __do_kmalloc mm/slab.c:3718 [inline]
 __kmalloc+0x14e/0x760 mm/slab.c:3727
 kmalloc include/linux/slab.h:518 [inline]
 sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983
 ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427
 do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743
 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933
 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038
 __sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902
 __do_sys_setsockopt net/socket.c:1913 [inline]
 __se_sys_setsockopt net/socket.c:1910 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 22430:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xcf/0x230 mm/slab.c:3813
 __sock_kfree_s net/core/sock.c:2004 [inline]
 sock_kfree_s+0x29/0x60 net/core/sock.c:2010
 ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448
 __ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310
 ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328
 inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452
 __sock_release+0xd7/0x250 net/socket.c:579
 sock_close+0x19/0x20 net/socket.c:1141
 __fput+0x385/0xa30 fs/file_table.c:278
 ____fput+0x15/0x20 fs/file_table.c:309
 task_work_run+0x1e8/0x2a0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:193 [inline]
 exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166
 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
 do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801ce7f2500
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
 192-byte region [ffff8801ce7f2500ffff8801ce7f25c0)
The buggy address belongs to the page:
page:ffffea000739fc80 count:1 mapcount:0 mapping:ffff8801da800040 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040
raw: 0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                         ^
 ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agotipc: fix unsafe rcu locking when accessing publication list
Tung Nguyen [Fri, 12 Oct 2018 20:46:55 +0000 (22:46 +0200)]
tipc: fix unsafe rcu locking when accessing publication list

The binding table's 'cluster_scope' list is rcu protected to handle
races between threads changing the list and those traversing the list at
the same moment. We have now found that the function named_distribute()
uses the regular list_for_each() macro to traverse the said list.
Likewise, the function tipc_named_withdraw() is removing items from the
same list using the regular list_del() call. When these two functions
execute in parallel we see occasional crashes.

This commit fixes this by adding the missing _rcu() suffixes.

Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agorxrpc: Fix incorrect conditional on IPV6
David Howells [Fri, 12 Oct 2018 15:38:36 +0000 (16:38 +0100)]
rxrpc: Fix incorrect conditional on IPV6

The udpv6_encap_enable() function is part of the ipv6 code, and if that is
configured as a loadable module and rxrpc is built in then a build failure
will occur because the conditional check is wrong:

  net/rxrpc/local_object.o: In function `rxrpc_lookup_local':
  local_object.c:(.text+0x2688): undefined reference to `udpv6_encap_enable'

Use the correct config symbol (CONFIG_AF_RXRPC_IPV6) in the conditional
check rather than CONFIG_IPV6 as that will do the right thing.

Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Reported-by: kbuild-all@01.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoipv6: rate-limit probes for neighbourless routes
Sabrina Dubroca [Fri, 12 Oct 2018 14:22:47 +0000 (16:22 +0200)]
ipv6: rate-limit probes for neighbourless routes

When commit 270972554c91 ("[IPV6]: ROUTE: Add Router Reachability
Probing (RFC4191).") introduced router probing, the rt6_probe() function
required that a neighbour entry existed. This neighbour entry is used to
record the timestamp of the last probe via the ->updated field.

Later, commit 2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().")
removed the requirement for a neighbour entry. Neighbourless routes skip
the interval check and are not rate-limited.

This patch adds rate-limiting for neighbourless routes, by recording the
timestamp of the last probe in the fib6_info itself.

Fixes: 2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonet: bcmgenet: Poll internal PHY for GENETv5
Florian Fainelli [Thu, 11 Oct 2018 22:06:33 +0000 (15:06 -0700)]
net: bcmgenet: Poll internal PHY for GENETv5

On GENETv5, there is a hardware issue which prevents the GENET hardware
from generating a link UP interrupt when the link is operating at
10Mbits/sec. Since we do not have any way to configure the link
detection logic, fallback to polling in that case.

Fixes: 421380856d9c ("net: bcmgenet: add support for the GENETv5 hardware")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agorxrpc: use correct kvec num when sending BUSY response packet
YueHaibing [Thu, 11 Oct 2018 21:32:39 +0000 (22:32 +0100)]
rxrpc: use correct kvec num when sending BUSY response packet

Fixes gcc '-Wunused-but-set-variable' warning:

net/rxrpc/output.c: In function 'rxrpc_reject_packets':
net/rxrpc/output.c:527:11: warning:
 variable 'ioc' set but not used [-Wunused-but-set-variable]

'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response
packet.

Fixes: ece64fec164f ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agorxrpc: Fix an uninitialised variable
David Howells [Thu, 11 Oct 2018 21:32:31 +0000 (22:32 +0100)]
rxrpc: Fix an uninitialised variable

Fix an uninitialised variable introduced by the last patch.  This can cause
a crash when a new call comes in to a local service, such as when an AFS
fileserver calls back to the local cache manager.

Fixes: c1e15b4944c9 ("rxrpc: Fix the packet reception routine")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agotipc: initialize broadcast link stale counter correctly
Jon Maloy [Thu, 11 Oct 2018 20:02:29 +0000 (22:02 +0200)]
tipc: initialize broadcast link stale counter correctly

In the commit referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
unicast links to the affected node.

Unfortunately, this 'improvement' introduced two bugs, which each and
one alone cause only limited problems, but combined lead to seemingly
stochastic unicast link resets, depending on the amount of broadcast
traffic transmitted.

The first issue, a missing initialization of the 'tolerance' field of
the receiver broadcast link, was recently fixed by commit 047491ea334a
("tipc: set link tolerance correctly in broadcast link").

Ths second issue, where we omit to reset the 'stale_cnt' field of
the same link after a 'stale' period is over, leads to this counter
accumulating over time, and in the absence of the 'tolerance' criteria
leads to the above described symptoms. This commit adds the missing
initialization.

Fixes: a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agollc: set SOCK_RCU_FREE in llc_sap_add_socket()
Cong Wang [Thu, 11 Oct 2018 18:15:13 +0000 (11:15 -0700)]
llc: set SOCK_RCU_FREE in llc_sap_add_socket()

WHen an llc sock is added into the sk_laddr_hash of an llc_sap,
it is not marked with SOCK_RCU_FREE.

This causes that the sock could be freed while it is still being
read by __llc_lookup_established() with RCU read lock. sock is
refcounted, but with RCU read lock, nothing prevents the readers
getting a zero refcnt.

Fix it by setting SOCK_RCU_FREE in llc_sap_add_socket().

Reported-by: syzbot+11e05f04c15e03be5254@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoMerge tag 'mlx5-fixes-2018-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Tue, 16 Oct 2018 04:51:28 +0000 (21:51 -0700)]
Merge tag 'mlx5-fixes-2018-10-10' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-10-10

This pull request includes some fixes to mlx5 driver,
Please pull and let me know if there's any problem.

For -stable v4.11:
('net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type')
For -stable v4.17:
('net/mlx5: Fix memory leak when setting fpga ipsec caps')
For -stable v4.18:
('net/mlx5: WQ, fixes for fragmented WQ buffers API')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agonet/sched: cls_api: add missing validation of netlink attributes
Davide Caratti [Wed, 10 Oct 2018 20:00:58 +0000 (22:00 +0200)]
net/sched: cls_api: add missing validation of netlink attributes

Similarly to what has been done in 8b4c3cdd9dd8 ("net: sched: Add policy
validation for tc attributes"), fix classifier code to add validation of
TCA_CHAIN and TCA_KIND netlink attributes.

tested with:
 # ./tdc.py -c filter

v2: Let sch_api and cls_api share nla_policy they have in common, thanks
    to David Ahern.
v3: Avoid EXPORT_SYMBOL(), as validation of those attributes is not done
    by TC modules, thanks to Cong Wang.
    While at it, restore the 'Delete / get qdisc' comment to its orginal
    position, just above tc_get_qdisc() function prototype.

Fixes: 5bc1701881e39 ("net: sched: introduce multichain support for filters")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoethtool: fix a privilege escalation bug
Wenwen Wang [Mon, 8 Oct 2018 15:49:35 +0000 (10:49 -0500)]
ethtool: fix a privilege escalation bug

In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the
use-space buffer 'useraddr' and checked to see whether it is
ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from
the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next,
according to 'sub_cmd', a permission check is enforced through the function
ns_capable(). For example, the permission check is required if 'sub_cmd' is
ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is
ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be
done by anyone". The following execution invokes different handlers
according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE,
ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel
object 'per_queue_opt' is copied again from the user-space buffer
'useraddr' and 'per_queue_opt.sub_command' is used to determine which
operation should be performed. Given that the buffer 'useraddr' is in the
user space, a malicious user can race to change the sub-command between the
two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and
ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then
before ethtool_set_per_queue() is called, the attacker changes
ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can
bypass the permission check and execute ETHTOOL_SCOALESCE.

This patch enforces a check in ethtool_set_per_queue() after the second
copy from 'useraddr'. If the sub-command is different from the one obtained
in the first copy in dev_ethtool(), an error code EINVAL will be returned.

Fixes: f38d138a7da6 ("net/ethtool: support set coalesce per queue")
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoethtool: fix a missing-check bug
Wenwen Wang [Tue, 9 Oct 2018 13:15:38 +0000 (08:15 -0500)]
ethtool: fix a missing-check bug

In ethtool_get_rxnfc(), the eth command 'cmd' is compared against
'ETHTOOL_GRXFH' to see whether it is necessary to adjust the variable
'info_size'. Then the whole structure of 'info' is copied from the
user-space buffer 'useraddr' with 'info_size' bytes. In the following
execution, 'info' may be copied again from the buffer 'useraddr' depending
on the 'cmd' and the 'info.flow_type'. However, after these two copies,
there is no check between 'cmd' and 'info.cmd'. In fact, 'cmd' is also
copied from the buffer 'useraddr' in dev_ethtool(), which is the caller
function of ethtool_get_rxnfc(). Given that 'useraddr' is in the user
space, a malicious user can race to change the eth command in the buffer
between these copies. By doing so, the attacker can supply inconsistent
data and cause undefined behavior because in the following execution 'info'
will be passed to ops->get_rxnfc().

This patch adds a necessary check on 'info.cmd' and 'cmd' to confirm that
they are still same after the two copies in ethtool_get_rxnfc(). Otherwise,
an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agor8169: Enable MSI-X on RTL8106e
Jian-Hong Pan [Thu, 27 Sep 2018 04:09:48 +0000 (12:09 +0800)]
r8169: Enable MSI-X on RTL8106e

Originally, we have an issue where r8169 MSI-X interrupt is broken after
S3 suspend/resume on RTL8106e of ASUS X441UAR.

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: r8169
Kernel modules: r8169

We found the all of the values in PCI BAR=4 of the ethernet adapter
become 0xFF after system resumes.  That breaks the MSI-X interrupt.
Therefore, we can only fall back to MSI interrupt to fix the issue at
that time.

However, there is a commit which resolves the drivers getting nothing in
PCI BAR=4 after system resumes.  It is 04cb3ae895d7 "PCI: Reprogram
bridge prefetch registers on resume" by Daniel Drake.

After apply the patch, the ethernet adapter works fine before suspend
and after resume.  So, we can revert the workaround after the commit
"PCI: Reprogram bridge prefetch registers on resume" is merged into main
tree.

This patch reverts commit 7bb05b85bc2d1a1b647b91424b2ed4a18e6ecd81
"r8169: don't use MSI-X on RTL8106e".

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201181
Fixes: 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoRevert "sparc: Convert to using %pOFn instead of device_node.name"
David S. Miller [Tue, 16 Oct 2018 01:32:54 +0000 (18:32 -0700)]
Revert "sparc: Convert to using %pOFn instead of device_node.name"

This reverts commit 0b9871a3a8cc7234c285b5d9bf66cc6712cfee7c.

Causes crashes with qemu, interacts badly with commit commit
6d0a70a284be ("vsprintf: print OF node name using full_name")
etc.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoidr: Change documentation license
Matthew Wilcox [Mon, 15 Oct 2018 20:28:21 +0000 (16:28 -0400)]
idr: Change documentation license

This documentation was inadvertently released under the CC-BY-SA-4.0
license.  It was intended to be released under GPL-2.0 or later.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
11 months agotest_ida: Fix lockdep warning
Matthew Wilcox [Mon, 15 Oct 2018 20:23:08 +0000 (16:23 -0400)]
test_ida: Fix lockdep warning

The IDA was declared on the stack instead of statically, so lockdep
triggered a warning that it was improperly initialised.

Reported-by: 0day bot
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
11 months agoInput: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
Mikhail Nikiforov [Mon, 15 Oct 2018 18:17:56 +0000 (11:17 -0700)]
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM

Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.

Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 months agoafs: Fix clearance of reply
David Howells [Mon, 15 Oct 2018 11:43:02 +0000 (12:43 +0100)]
afs: Fix clearance of reply

The recent patch to fix the afs_server struct leak didn't actually fix the
bug, but rather fixed some of the symptoms.  The problem is that an
asynchronous call that holds a resource pointed to by call->reply[0] will
find the pointer cleared in the call destructor, thereby preventing the
resource from being cleaned up.

In the case of the server record leak, the afs_fs_get_capabilities()
function in devel code sets up a call with reply[0] pointing at the server
record that should be altered when the result is obtained, but this was
being cleared before the destructor was called, so the put in the
destructor does nothing and the record is leaked.

Commit f014ffb025c1 removed the additional ref obtained by
afs_install_server(), but the removal of this ref is actually used by the
garbage collector to mark a server record as being defunct after the record
has expired through lack of use.

The offending clearance of call->reply[0] upon completion in
afs_process_async_call() has been there from the origin of the code, but
none of the asynchronous calls actually use that pointer currently, so it
should be safe to remove (note that synchronous calls don't involve this
function).

Fix this by the following means:

 (1) Revert commit f014ffb025c1.

 (2) Remove the clearance of reply[0] from afs_process_async_call().

Without this, afs_manage_servers() will suffer an assertion failure if it
sees a server record that didn't get used because the usage count is not 1.

Fixes: f014ffb025c1 ("afs: Fix afs_server struct leak")
Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agoLinux 4.19-rc8 v4.19-rc8
Greg Kroah-Hartman [Mon, 15 Oct 2018 05:20:24 +0000 (07:20 +0200)]
Linux 4.19-rc8

11 months agosparc64: Set %l4 properly on trap return after handling signals.
David S. Miller [Mon, 15 Oct 2018 03:22:28 +0000 (20:22 -0700)]
sparc64: Set %l4 properly on trap return after handling signals.

If we did some signal processing, we have to reload the pt_regs
tstate register because it's value may have changed.

In doing so we also have to extract the %pil value contained in there
anre load that into %l4.

This value is at bit 20 and thus needs to be shifted down before we
later write it into the %pil register.

Most of the time this is harmless as we are returning to userspace
and the %pil is zero for that case.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agosparc64: Make proc_id signed.
David S. Miller [Mon, 15 Oct 2018 03:19:31 +0000 (20:19 -0700)]
sparc64: Make proc_id signed.

So that when it is unset, ie. '-1', userspace can see it
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Sun, 14 Oct 2018 20:01:20 +0000 (13:01 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-10-14

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix xsk map update and delete operation to not call synchronize_net()
   but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
   allowed to sleep under RCU, from Björn.

2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
   already has unlimited RLIMIT_MEMLOCK, from Eric.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agoMerge tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:34:31 +0000 (08:34 +0200)]
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git./linux/kernel/git/nvdimm/nvdimm

Dan writes:
  "libnvdimm/dax 4.19-rc8

   * Fix a livelock in dax_layout_busy_page() present since v4.18. The
     lockup triggers when truncating an actively mapped huge page out of
     a mapping pinned for direct-I/O.

   * Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
     mprotect() clears this flag that is needed to communicate the
     liveness of device pages to the get_user_pages() path."

* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  mm: Preserve _PAGE_DEVMAP across mprotect() calls
  filesystem-dax: Fix dax_layout_busy_page() livelock

11 months agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:33:35 +0000 (08:33 +0200)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Wolfram writes:
  "i2c fix for 4.19:

   I2C has one documentation bugfix for something we changed during the
   v4.19 cycle"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: Fix kerneldoc for renamed i2c dma put function

11 months agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Greg Kroah-Hartman [Sat, 13 Oct 2018 13:11:15 +0000 (15:11 +0200)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Paolo writes:
  "KVM fixes for 4.19-rc8

   Leftover bugfixes."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
  KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
  ARM: KVM: Correctly order SGI register entries in the cp15 array

11 months agoKVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
Vitaly Kuznetsov [Thu, 11 Oct 2018 10:03:12 +0000 (12:03 +0200)]
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()

I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit 877ad952be3d ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:

"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"

So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().

Fixes: 877ad952be3d ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
11 months agoubifs: Fix WARN_ON logic in exit path
Richard Weinberger [Sat, 13 Oct 2018 08:18:41 +0000 (10:18 +0200)]
ubifs: Fix WARN_ON logic in exit path

ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd382d ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agoMerge branch 'akpm'
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:31:19 +0000 (09:31 +0200)]
Merge branch 'akpm'

Fixes from Andrew:

* akpm:
  fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
  mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
  mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
  ocfs2: fix a GCC warning

11 months agofs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
Khazhismel Kumykov [Sat, 13 Oct 2018 04:34:40 +0000 (21:34 -0700)]
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()

On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.

Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agomm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
Jérôme Glisse [Sat, 13 Oct 2018 04:34:36 +0000 (21:34 -0700)]
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2

Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()

So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).

Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agomm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
Jann Horn [Sat, 13 Oct 2018 04:34:32 +0000 (21:34 -0700)]
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE

Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash.  The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region.  It does not bail out if the
VMA only overlaps another part of the requested region.

Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.

Test case:

user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif

int main(void) {
  char *p;

  errno = 0;
  p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
  printf("p1=%p err=%m\n", p);

  errno = 0;
  p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
  printf("p2=%p err=%m\n", p);

  char cmd[100];
  sprintf(cmd, "cat /proc/%d/maps", getpid());
  system(cmd);

  return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-10002000 r--p 00000000 00:00 0
10002000-10005000 ---p 00000000 00:00 0
564a9a06f000-564a9a070000 r-xp 00000000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a26f000-564a9a270000 r--p 00000000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a270000-564a9a271000 rw-p 00001000 fe:01 264004
  /home/user/mmap_fixed_simple
564a9a54a000-564a9a56b000 rw-p 00000000 00:00 0                          [heap]
7f8eba447000-7f8eba5dc000 r-xp 00000000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-7f8eba7dc000 ---p 00195000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-7f8eba7e0000 r--p 00195000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-7f8eba7e2000 rw-p 00199000 fe:01 405885
  /lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-7f8eba7e6000 rw-p 00000000 00:00 0
7f8eba7e6000-7f8eba809000 r-xp 00000000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-7f8eba9eb000 rw-p 00000000 00:00 0
7f8ebaa06000-7f8ebaa09000 rw-p 00000000 00:00 0
7f8ebaa09000-7f8ebaa0a000 r--p 00023000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-7f8ebaa0b000 rw-p 00024000 fe:01 405876
  /lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-7f8ebaa0c000 rw-p 00000000 00:00 0
7ffcc99fa000-7ffcc9a1b000 rw-p 00000000 00:00 0                          [stack]
7ffcc9b44000-7ffcc9b47000 r--p 00000000 00:00 0                          [vvar]
7ffcc9b47000-7ffcc9b49000 r-xp 00000000 00:00 0                          [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0
  [vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$

As you can see, the first page of the mapping at 0x10001000 was clobbered.

Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes: a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agoocfs2: fix a GCC warning
zhong jiang [Sat, 13 Oct 2018 04:34:26 +0000 (21:34 -0700)]
ocfs2: fix a GCC warning

Fix the following compile warning:

fs/ocfs2/dlmglue.c:99:30: warning: \91lockdep_keys\92 defined but not used [-Wunused-variable]
 static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];

Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 months agoMerge tag 'for-linus-20181012' of git://git.kernel.dk/linux-block
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:07:23 +0000 (09:07 +0200)]
Merge tag 'for-linus-20181012' of git://git.kernel.dk/linux-block

Jens writes:
  "block fix for 4.19-rc

   Just a single fix that should go in, fixing a regression introduced
   in the blk-wbt code."

* tag 'for-linus-20181012' of git://git.kernel.dk/linux-block:
  blk-wbt: wake up all when we scale up, not down

11 months agoMerge tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2...
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:06:27 +0000 (09:06 +0200)]
Merge tag 'gfs2-4.19.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2

Andreas writes:
  "gfs2 4.19 fixes

   Fix iomap buffered write support for journaled files"

* tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix iomap buffered write support for journaled files (2)

11 months agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:05:37 +0000 (09:05 +0200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Will writes:
  "More arm64 fixes

   - Reject CHAIN PMU events when they are not part of a 64-bit counter

   - Fix WARN_ON_ONCE() that triggers for reserved regions that don't
     correspond to mapped memory"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: Reject stand-alone CHAIN events for PMUv3
  arm64: Fix /proc/iomem for reserved but not memory regions

11 months agosparc: Throttle perf events properly.
David S. Miller [Fri, 12 Oct 2018 17:33:20 +0000 (10:33 -0700)]
sparc: Throttle perf events properly.

Like x86 and arm, call perf_sample_event_took() in perf event
NMI interrupt handler.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 months agosparc: Fix single-pcr perf event counter management.
David S. Miller [Fri, 12 Oct 2018 17:31:58 +0000 (10:31 -0700)]
sparc: Fix single-pcr perf event counter management.

It is important to clear the hw->state value for non-stopped events
when they are added into the PMU.  Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set.  This breaks 'perf stat' and similar use cases, causing all the
events to show zero.

This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs().  calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value.  So we have to add explicit
hw->state handling there.

Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.

Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.

Signed-off-by: David S. Miller <davem@davemloft.net>