sfrench/cifs-2.6.git
3 years agonet/mlx5e: RX, Prefetch the xdp_frame data area
Tariq Toukan [Wed, 16 May 2018 07:46:57 +0000 (10:46 +0300)]
net/mlx5e: RX, Prefetch the xdp_frame data area

A loaded XDP program might write to the xdp_frame data area,
prefetchw() it to avoid a potential cache miss.

Performance tests:
ConnectX-5, XDP_TX packet rate, single ring.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

Before: 13,172,976 pps
After:  13,456,248 pps
2% gain.

Fixes: 22f453988194 ("net/mlx5e: Support XDP over Striding RQ")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Add support for XDP_REDIRECT in device-out side
Tariq Toukan [Tue, 22 May 2018 13:48:48 +0000 (16:48 +0300)]
net/mlx5e: Add support for XDP_REDIRECT in device-out side

Add implementation for the ndo_xdp_xmit callback.

Dedicate a new set of XDP-SQ instances to satisfy the XDP_REDIRECT
requests.  These instances are totally separated from the existing
XDP-SQ objects that satisfy local XDP_TX actions.

Performance tests:

xdp_redirect_map from ConnectX-5 to ConnectX-5.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Packet-rate of 64B packets.

Single queue: 7 Mpps.
Multi queue: 55 Mpps.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Re-order fields of struct mlx5e_xdpsq
Tariq Toukan [Tue, 22 May 2018 13:43:54 +0000 (16:43 +0300)]
net/mlx5e: Re-order fields of struct mlx5e_xdpsq

In the downstream patch that adds support to XDP_REDIRECT-out,
the XDP xmit frame function doesn't share the same run context as
the NAPI that polls the XDP-SQ completion queue.

Hence, need to re-order the XDP-SQ fields to avoid cacheline
false-sharing.

Take redirect_flush and doorbell out of DB, into separated
cachelines.

Add a cacheline breaker within the stats struct.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Refactor XDP counters
Tariq Toukan [Tue, 22 May 2018 13:29:31 +0000 (16:29 +0300)]
net/mlx5e: Refactor XDP counters

Separate the XDP counters into two sets:
(1) One set reside in the RQ stats, and they monitor XDP stats
in the RQ side.
(2) Another set is per XDP-SQ, and they monitor XDP stats that
are related to XDP transmit flow.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Make XDP xmit functions more generic
Tariq Toukan [Sun, 15 Jul 2018 07:34:39 +0000 (10:34 +0300)]
net/mlx5e: Make XDP xmit functions more generic

Convert the XDP xmit functions to use the generic xdp_frame API
in XDP_TX flow.
Same functions will be used later in this series to transmit
the XDP redirect-out packets as well.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Add counter for XDP redirect in RX
Tariq Toukan [Wed, 16 May 2018 07:16:30 +0000 (10:16 +0300)]
net/mlx5e: Add counter for XDP redirect in RX

Add per-ring and total stats for received packets that
goes into XDP redirection.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Move XDP related code into new XDP files
Tariq Toukan [Sun, 15 Jul 2018 07:28:44 +0000 (10:28 +0300)]
net/mlx5e: Move XDP related code into new XDP files

Take XDP code out of the general EN header and RX file into
new XDP files.

Currently, XDP-SQ resides only within an RQ and used from a
single flow (XDP_TX) triggered upon RX completions.
In a downstream patch, additional type of XDP-SQ instances will be
presented and used for the XDP_REDIRECT flow, totally unrelated to
the RX context.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Restrict the combination of large MTU and XDP
Tariq Toukan [Sun, 31 Dec 2017 13:50:13 +0000 (15:50 +0200)]
net/mlx5e: Restrict the combination of large MTU and XDP

Add checks in control path upon an MTU change or an XDP program set,
to prevent reaching cases where large MTU and XDP are set simultaneously.

This is to make sure we allow XDP only with the linear RX memory scheme,
i.e. a received packet is not scattered to different pages.
Change mlx5e_rx_get_linear_frag_sz() accordingly, so that we make sure
the XDP configuration can really be set, instead of assuming that it is.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Gather all XDP pre-requisite checks in a single function
Tariq Toukan [Mon, 12 Mar 2018 16:26:51 +0000 (18:26 +0200)]
net/mlx5e: Gather all XDP pre-requisite checks in a single function

Dedicate a function to all checks done when setting an XDP program.
Take indications from priv instead of netdev features.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Do not recycle RX pages in interface down flow
Tariq Toukan [Tue, 12 Jun 2018 07:09:24 +0000 (10:09 +0300)]
net/mlx5e: Do not recycle RX pages in interface down flow

Keep all page-pool recycle calls within NAPI context.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Replace call to MPWQE free with dealloc in interface down flow
Tariq Toukan [Tue, 12 Jun 2018 07:08:43 +0000 (10:08 +0300)]
net/mlx5e: Replace call to MPWQE free with dealloc in interface down flow

No need to expose the MPWQE free function to control path.
The dealloc function already exposed, use it.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agoMerge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
David S. Miller [Thu, 26 Jul 2018 21:14:01 +0000 (14:14 -0700)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-07-26

This series contains updates to ixgbe and igb.

Tony fixes ixgbe to add checks to ensure jumbo frames or LRO get enabled
after an XDP program is loaded.

Shannon Nelson adds the missing security configuration registers to the
ixgbe register dump, which will help in debugging.

Christian Grönke fixes an issue in igb that occurs on SGMII based SPF
mdoules, by reverting changes from 2 previous patches.  The issue was
that initialization would fail on the fore mentioned modules because the
driver would try to reset the PHY before obtaining the PHY address of
the SGMII attached PHY.

Venkatesh Srinivas replaces wmb() with dma_wmb() for doorbell writes,
which avoids SFENCEs before the doorbell writes.

Alex cleans up and refactors ixgbe Tx/Rx shutdown to reduce time needed
to stop the device.  The code refactor allows us to take the completion
time into account when disabling queues, so that on some platforms with
higher completion times, would not result in receive queues disabled
messages.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: sched: unmark chain as explicitly created on delete
Jiri Pirko [Thu, 26 Jul 2018 16:27:58 +0000 (18:27 +0200)]
net: sched: unmark chain as explicitly created on delete

Once user manually deletes the chain using "chain del", the chain cannot
be marked as explicitly created anymore.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Skip zerocopy path for ITER_KVEC
Doron Roberts-Kedes [Wed, 25 Jul 2018 21:48:21 +0000 (14:48 -0700)]
tls: Skip zerocopy path for ITER_KVEC

The zerocopy path ultimately calls iov_iter_get_pages, which defines the
step function for ITER_KVECs as simply, return -EFAULT. Taking the
non-zerocopy path for ITER_KVECs avoids the unnecessary fallback.

See https://lore.kernel.org/lkml/20150401023311.GL29656@ZenIV.linux.org.uk/T/#u
for a discussion of why zerocopy for vmalloc data is not a good idea.

Discovered while testing NBD traffic encrypted with ktls.

Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: sched: cls_api: fix dead code in switch
Gustavo A. R. Silva [Wed, 25 Jul 2018 14:07:24 +0000 (09:07 -0500)]
net: sched: cls_api: fix dead code in switch

Code at line 1850 is unreachable. Fix this by removing the break
statement above it, so the code for case RTM_GETCHAIN can be
properly executed.

Addresses-Coverity-ID: 1472050 ("Structurally dead code")
Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agol2tp: remove ->recv_payload_hook
Guillaume Nault [Wed, 25 Jul 2018 12:53:33 +0000 (14:53 +0200)]
l2tp: remove ->recv_payload_hook

The tunnel reception hook is only used by l2tp_ppp for skipping PPP
framing bytes. This is a session specific operation, but once a PPP
session sets ->recv_payload_hook on its tunnel, all frames received by
the tunnel will enter pppol2tp_recv_payload_hook(), including those
targeted at Ethernet sessions (an L2TPv3 tunnel can multiplex PPP and
Ethernet sessions).

So this mechanism is wrong, and uselessly complex. Let's just move this
functionality to the pppol2tp rx handler and drop ->recv_payload_hook.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: add missing dev_put() on error in tipc_enable_l2_media
YueHaibing [Wed, 25 Jul 2018 10:00:49 +0000 (18:00 +0800)]
tipc: add missing dev_put() on error in tipc_enable_l2_media

when tipc_own_id failed to obtain node identity,dev_put should
be call before return -EINVAL.

Fixes: 682cd3cf946b ("tipc: confgiure and apply UDP bearer MTU on running links")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/tls: Removed redundant checks for non-NULL
Vakul Garg [Tue, 24 Jul 2018 11:24:27 +0000 (16:54 +0530)]
net/tls: Removed redundant checks for non-NULL

Removed checks against non-NULL before calling kfree_skb() and
crypto_free_aead(). These functions are safe to be called with NULL
as an argument.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocbs: Add support for the graft function
Vinicius Costa Gomes [Tue, 24 Jul 2018 00:08:00 +0000 (17:08 -0700)]
cbs: Add support for the graft function

This will allow to install a child qdisc under cbs. The main use case
is to install ETF (Earliest TxTime First) qdisc under cbs, so there's
another level of control for time-sensitive traffic.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: hns: Make many functions static
YueHaibing [Thu, 26 Jul 2018 13:19:58 +0000 (21:19 +0800)]
net: hns: Make many functions static

Fixes the following sparse warning:

drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:73:20: warning: symbol 'hns_ae_get_handle' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:332:6: warning: symbol 'hns_ae_stop' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:360:6: warning: symbol 'hns_ae_toggle_ring_irq' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:580:6: warning: symbol 'hns_ae_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:663:6: warning: symbol 'hns_ae_get_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:695:6: warning: symbol 'hns_ae_get_strings' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:728:5: warning: symbol 'hns_ae_get_sset_count' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:774:6: warning: symbol 'hns_ae_update_led_status' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:786:5: warning: symbol 'hns_ae_cpld_set_led_id' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:798:6: warning: symbol 'hns_ae_get_regs' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:823:5: warning: symbol 'hns_ae_get_regs_len' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c:342:6: warning: symbol 'hns_gmac_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:934:12: warning: symbol 'hns_mac_get_vaddr' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:953:5: warning: symbol 'hns_mac_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:343:6: warning: symbol 'hns_dsaf_srst_chns' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:366:1: warning: symbol 'hns_dsaf_srst_chns_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:373:6: warning: symbol 'hns_dsaf_roce_srst' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:387:6: warning: symbol 'hns_dsaf_roce_srst_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:571:5: warning: symbol 'hns_mac_get_sfp_prsnt' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:589:5: warning: symbol 'hns_mac_get_sfp_prsnt_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:31:12: warning: symbol 'g_dsaf_mode_match' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:45:5: warning: symbol 'hns_dsaf_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:962:6: warning: symbol 'hns_dsaf_tcam_addr_get' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2087:6: warning: symbol 'hns_dsaf_port_work_rate_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2837:5: warning: symbol 'hns_dsaf_roce_reset' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:76:5: warning: symbol 'hns_ppe_common_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:107:6: warning: symbol 'hns_ppe_common_free_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:340:6: warning: symbol 'hns_ppe_uninit_ex' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:708:5: warning: symbol 'hns_rcb_get_ring_num' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:744:14: warning: symbol 'hns_rcb_common_get_vaddr' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:314:6: warning: symbol 'hns_xgmac_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1303:6: warning: symbol 'hns_nic_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1585:6: warning: symbol 'hns_nic_poll_controller' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1938:6: warning: symbol 'hns_set_multicast_list' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1960:6: warning: symbol 'hns_nic_set_rx_mode' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:661:6: warning: symbol 'hns_get_ringparam' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:811:6: warning: symbol 'hns_get_channels' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:828:6: warning: symbol 'hns_get_ethtool_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:886:6: warning: symbol 'hns_get_strings' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:976:5: warning: symbol 'hns_get_sset_count' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1010:5: warning: symbol 'hns_phy_led_set' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1032:5: warning: symbol 'hns_set_phys_id' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1106:6: warning: symbol 'hns_get_regs' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoselftests/net: add tls to .gitignore
Anders Roxell [Thu, 26 Jul 2018 09:53:58 +0000 (11:53 +0200)]
selftests/net: add tls to .gitignore

Add the tls binary to .gitignore

Fixes: 7f657d5bf507 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoselftests: forwarding: add tests for TC chain get and dump operations
Jiri Pirko [Thu, 26 Jul 2018 09:38:34 +0000 (11:38 +0200)]
selftests: forwarding: add tests for TC chain get and dump operations

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoixgbe: Refactor queue disable logic to take completion time into account
Alexander Duyck [Fri, 20 Jul 2018 22:29:34 +0000 (18:29 -0400)]
ixgbe: Refactor queue disable logic to take completion time into account

This change is meant to allow us to take completion time into account when
disabling queues. Previously we were just working with hard coded values
for how long we should wait. This worked fine for the standard case where
completion timeout was operating in the 50us to 50ms range, however on
platforms that have higher completion timeout times this was resulting in
Rx queues disable messages being displayed as we weren't waiting long
enough for outstanding Rx DMA completions.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: Reorder Tx/Rx shutdown to reduce time needed to stop device
Alexander Duyck [Fri, 20 Jul 2018 22:29:29 +0000 (18:29 -0400)]
ixgbe: Reorder Tx/Rx shutdown to reduce time needed to stop device

This change is meant to help reduce the time needed to shutdown the
transmit and receive paths for the device. Specifically what we now do
after this patch is disable the transmit path first at the netdev level,
and then work on disabling the Rx. This way while we are waiting on the Rx
queues to be disabled the Tx queues have an opportunity to drain out.

In addition I have dropped the 10ms timeout that was left in the ixgbe_down
function that seems to have been carried through from back in e1000 as far
as I can tell. We shouldn't need it since we don't actually disable the Tx
until much later and we have additional logic in place for verifying the Tx
queues have been disabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoigb: Use dma_wmb() instead of wmb() before doorbell writes
Venkatesh Srinivas [Fri, 25 May 2018 04:13:21 +0000 (00:13 -0400)]
igb: Use dma_wmb() instead of wmb() before doorbell writes

igb writes to doorbells to post transmit and receive descriptors;
after writing descriptors to memory but before writing to doorbells,
use dma_wmb() rather than wmb(). wmb() is more heavyweight than
necessary before doorbell writes.

On x86, this avoids SFENCEs before doorbell writes in both the
tx and rx refill paths.

Signed-off-by: Venkatesh Srinivas <venkateshs@google.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoigb: Remove superfluous reset to PHY and page 0 selection
Christian Grönke [Tue, 26 Jun 2018 10:12:18 +0000 (10:12 +0000)]
igb: Remove superfluous reset to PHY and page 0 selection

This patch reverts two previous applied patches to fix an issue
that appeared when using SGMII based SFP modules. In the current
state the driver will try to reset the PHY before obtaining the
phy_addr of the SGMII attached PHY. That leads to an error in
e1000_write_phy_reg_sgmii_82575. Causing the initialization to
fail:

    igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
    igb: Copyright (c) 2007-2014 Intel Corporation.
    igb: probe of ????:??:??.? failed with error -3

The patches being reverted are:

    commit 182785335447957409282ca745aa5bc3968facee
    Author: Aaron Sierra <asierra@xes-inc.com>
    Date:   Tue Nov 29 10:03:56 2016 -0600

        igb: reset the PHY before reading the PHY ID

    commit 440aeca4b9858248d8f16d724d9fa87a4f65fa33
    Author: Matwey V Kornilov <matwey@sai.msu.ru>
    Date:   Thu Nov 24 13:32:48 2016 +0300

         igb: Explicitly select page 0 at initialization

The first reverted patch directly causes the problem mentioned above.
In case of SGMII the phy_addr is not known at this point and will
only be obtained by 'igb_get_phy_id_82575' further down in the code.
The second removed patch selects forces selection of page 0 in the
PHY. Something that the reset tries to address as well.

As pointed out by Alexander Duzck, the patch below fixes the same
issue but in the proper location:

    commit 4e684f59d760a2c7c716bb60190783546e2d08a1
    Author: Chris J Arges <christopherarges@gmail.com>
    Date:   Wed Nov 2 09:13:42 2016 -0500

        igb: Workaround for igb i210 firmware issue

Reverts: 440aeca4b9858248d8f16d724d9fa87a4f65fa33.
Reverts: 182785335447957409282ca745aa5bc3968facee.

Signed-off-by: Christian Grönke <c.groenke@infodas.de>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: add ipsec security registers into ethtool register dump
Shannon Nelson [Tue, 3 Jul 2018 00:09:30 +0000 (17:09 -0700)]
ixgbe: add ipsec security registers into ethtool register dump

Add the ixgbe's security configuration registers into
the register dump.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: Do not allow LRO or MTU change with XDP
Tony Nguyen [Wed, 30 May 2018 23:14:23 +0000 (16:14 -0700)]
ixgbe: Do not allow LRO or MTU change with XDP

XDP does not support jumbo frames or LRO.  These checks are being made
outside the driver when an XDP program is loaded, however, there is
nothing preventing these from changing after an XDP program is loaded.
Add the checks so that while an XDP program is loaded, do not allow MTU
to be changed or LRO to be enabled.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agords: send: Fix dead code in rds_sendmsg
Gustavo A. R. Silva [Wed, 25 Jul 2018 15:22:27 +0000 (10:22 -0500)]
rds: send: Fix dead code in rds_sendmsg

Currently, code at label *out* is unreachable. Fix this by updating
variable *ret* with -EINVAL, so the jump to *out* can be properly
executed instead of directly returning from function.

Addresses-Coverity-ID: 1472059 ("Structurally dead code")
Fixes: 1e2b44e78eea ("rds: Enable RDS IPv6 support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/rds/Kconfig: RDS should depend on IPV6
Anders Roxell [Wed, 25 Jul 2018 22:20:08 +0000 (00:20 +0200)]
net/rds/Kconfig: RDS should depend on IPV6

Build error, implicit declaration of function __inet6_ehashfn shows up
When RDS is enabled but not IPV6.
net/rds/connection.c: In function ‘rds_conn_bucket’:
net/rds/connection.c:67:9: error: implicit declaration of function ‘__inet6_ehashfn’; did you mean ‘__inet_ehashfn’? [-Werror=implicit-function-declaration]
  hash = __inet6_ehashfn(lhash, 0, fhash, 0, rds_hash_secret);
         ^~~~~~~~~~~~~~~
         __inet_ehashfn

Current code adds IPV6 as a depends on in config RDS.

Fixes: eee2fa6ab322 ("rds: Changing IP address internal representation to struct in6_addr")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'smc-next'
David S. Miller [Thu, 26 Jul 2018 05:25:54 +0000 (22:25 -0700)]
Merge branch 'smc-next'

Ursula Braun says:

====================
net/smc: patches 2018-07-25

here are 4 more patches for SMC: The first one is just a small
code cleanup in preparation for patch 2. Patch 2 switches to the
use of the vlan-gid for VLAN traffic. Patch 3 improves diagnosis
when creating SMC connections. Patch 4 improves synchronization
between local and remote link groups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: improve delete link processing
Karsten Graul [Wed, 25 Jul 2018 14:35:33 +0000 (16:35 +0200)]
net/smc: improve delete link processing

Send an orderly DELETE LINK request before termination of a link group,
add support for client triggered DELETE LINK processing. And send a
disorderly DELETE LINK before module is unloaded.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: provide fallback reason code
Karsten Graul [Wed, 25 Jul 2018 14:35:32 +0000 (16:35 +0200)]
net/smc: provide fallback reason code

Remember the fallback reason code and the peer diagnosis code for
smc sockets, and provide them in smc_diag.c to the netlink interface.
And add more detailed reason codes.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: use correct vlan gid of RoCE device
Ursula Braun [Wed, 25 Jul 2018 14:35:31 +0000 (16:35 +0200)]
net/smc: use correct vlan gid of RoCE device

SMC code uses the base gid for VLAN traffic. The gids exchanged in
the CLC handshake and the gid index used for the QP have to switch
from the base gid to the appropriate vlan gid.

When searching for a matching IB device port for a certain vlan
device, it does not make sense to return an IB device port, which
is not enabled for the used vlan_id. Add another check whether a
vlan gid exists for a certain IB device port.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: fewer parameters for smc_llc_send_confirm_link()
Ursula Braun [Wed, 25 Jul 2018 14:35:30 +0000 (16:35 +0200)]
net/smc: fewer parameters for smc_llc_send_confirm_link()

Link confirmation will always be sent across the new link being
confirmed. This allows to shrink the parameter list.
No functional change.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'nfp-protect-from-theoretical-size-overflows-and-SR-IOV-errors'
David S. Miller [Thu, 26 Jul 2018 05:17:45 +0000 (22:17 -0700)]
Merge branch 'nfp-protect-from-theoretical-size-overflows-and-SR-IOV-errors'

Jakub Kicinski says:

====================
nfp: protect from theoretical size overflows and SR-IOV errors

This small set changes the handling of pci_sriov_set_totalvfs() errors.
nfp is the only driver which fails probe on pci_sriov_set_totalvfs()
errors.  It turns out some BIOS configurations may break SR-IOV and
users who don't use that feature should not suffer.

Remaining patches makes sure we use overflow-safe function for ring
allocation, even though ring sizes are limited.  It won't hurt and
we can also enable fallback to vmalloc() if memory is tight while
at it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: protect from theoretical size overflows on HW descriptor ring
Jakub Kicinski [Thu, 26 Jul 2018 02:40:37 +0000 (19:40 -0700)]
nfp: protect from theoretical size overflows on HW descriptor ring

Use array_size() and store the size as full size_t to protect from
theoretical size overflow when handling HW descriptor rings.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: restore correct ordering of fields in rx ring structure
Jakub Kicinski [Thu, 26 Jul 2018 02:40:36 +0000 (19:40 -0700)]
nfp: restore correct ordering of fields in rx ring structure

Commit 7f1c684a8966 ("nfp: setup xdp_rxq_info") mixed the cache
cold and cache hot data in the nfp_net_rx_ring structure (ignoring
the feedback), to try to fit the structure into 2 cache lines
after struct xdp_rxq_info was added.  Now that we are about to add
a new field the structure will grow back to 3 cache lines, so
order the members correctly.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: use kvcalloc() to allocate SW buffer descriptor arrays
Jakub Kicinski [Thu, 26 Jul 2018 02:40:35 +0000 (19:40 -0700)]
nfp: use kvcalloc() to allocate SW buffer descriptor arrays

Use kvcalloc() instead of tmp variable + kzalloc() when allocating
SW buffer information to allow falling back to vmalloc and to protect
from theoretical integer overflow.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: don't fail probe on pci_sriov_set_totalvfs() errors
Jakub Kicinski [Thu, 26 Jul 2018 02:40:34 +0000 (19:40 -0700)]
nfp: don't fail probe on pci_sriov_set_totalvfs() errors

On machines with buggy ACPI tables or when SR-IOV is already enabled
we may not be able to set the SR-IOV VF limit in sysfs, it's not fatal
because the limit is imposed by the driver anyway.  Only the sysfs
'sriov_totalvfs' attribute will be too high.  Print an error to inform
user about the failure but allow probe to continue.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoamd-xgbe: use dma_mapping_error to check map errors
YueHaibing [Thu, 26 Jul 2018 01:51:27 +0000 (09:51 +0800)]
amd-xgbe: use dma_mapping_error to check map errors

The dma_mapping_error() returns true or false, but we want
to return -ENOMEM if there was an error.

Fixes: 174fd2597b0b ("amd-xgbe: Implement split header receive support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mlxsw-Introduce-algorithmic-TCAM-support'
David S. Miller [Wed, 25 Jul 2018 23:46:02 +0000 (16:46 -0700)]
Merge branch 'mlxsw-Introduce-algorithmic-TCAM-support'

Ido Schimmel says:

====================
mlxsw: Introduce algorithmic TCAM support

The Spectrum-2 ASIC uses an algorithmic TCAM (A-TCAM) where multiple
exact matches lookups are performed instead of a single lookup as with
standard circuit TCAM (C-TCAM) memory. This allows for higher scale and
reduced power consumption.

The lookups are performed by masking a packet using different masks
(e.g., {dst_ip/24, ethtype}) defined for the region and looking for an
exact match. Eventually, the rule with the highest priority will be
picked.

Since the number of masks per-region is limited, the ASIC includes a
C-TCAM that can be used as a spill area for rules that do not fit into
the A-TCAM.

The driver currently uses a C-TCAM only mode which is similar to
Spectrum-1. However, this mode severely limits both the number of
supported ACL rules and the performance of the ACL lookup.

This patch set introduces initial support for the A-TCAM mode where the
C-TCAM is only used for rule spillage.

The first five patches add the registers and ASIC resources needed in
order to make use of the A-TCAM.

Next three patches are the "meat" and add the eRP core which is used to
manage the masks used by each ACL region. The individual commit messages
are lengthy and aim to thoroughly explain the subject.

The next seven patches perform small adjustments in the code and the
related data structures and are meant to prepare the code base to the
introduction of the A-TCAM in the last two patches.

Various A-TCAM optimization will be the focus of follow-up patch sets:

* Pruning - Used to reduce the number of lookups. Each rule will include
  a prune vector that indicates which masks should not be considered for
  further lookups as they cannot result in a higher priority match

* Bloom filter - Used to reduce the number of lookups. Before performing
  a lookup with a given mask the ASIC will consult a bloom filter
  (managed by the driver) that indicates whether a match might exist using
  the considered mask

* Masks aggregation - Used to increase scale and reduce lookups. Masks
  that only differ by up to eight consecutive bits (delta bits) can be
  aggregated into a single mask. The delta bits then become a part of the
  rule's key. For example, dst_ip/16 and dst_ip/17 can be represented as
  dst_ip/16 with a delta bit of one. Rules using the aggregated mask then
  specify whether the 17-th bit should be masked or not and its value
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Start using A-TCAM
Ido Schimmel [Wed, 25 Jul 2018 06:24:06 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Start using A-TCAM

Now that all the pieces are in place we can start using the A-TCAM
instead of only using the C-TCAM. This allows for much higher scale and
better performance (to be improved further by follow-up patch sets).

Perform the integration with the A-TCAM and the eRP core by reverting
the changes introduced by "mlxsw: spectrum_acl: Enable C-TCAM only mode
in eRP core" and add calls from the C-TCAM code into the eRP core.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Add A-TCAM rule insertion and deletion
Ido Schimmel [Wed, 25 Jul 2018 06:24:05 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Add A-TCAM rule insertion and deletion

Implement rule insertion and deletion into the A-TCAM before we flip the
driver to start using the A-TCAM.

Rule insertion into the A-TCAM is very similar to C-TCAM, but there are
subtle differences between regions of different sizes (i.e., different
number of key blocks).

Specifically, as explained in "mlxsw: spectrum_acl: Allow encoding a
partial key", in 12 key blocks regions a rule is split into two and the
two halves of the rule are linked using a "large entry key ID".

Such differences are abstracted away by using different region
operations per region type.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Pass C-TCAM region and entry to insert function
Ido Schimmel [Wed, 25 Jul 2018 06:24:04 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Pass C-TCAM region and entry to insert function

When A-TCAM will be used together with C-TCAM, the C-TCAM code will need
to call into the eRP core in order to get an eRP for an inserted entry.

The eRP core takes an A-TCAM region as one of its arguments, so pass the
C-TCAM region to the insertion function which will later allow us to
derive the A-TCAM region, given it contains the C-TCAM one.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Add A-TCAM region initialization
Ido Schimmel [Wed, 25 Jul 2018 06:24:03 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Add A-TCAM region initialization

Before we start using the A-TCAM we need to make sure the region is
properly initialized.

This includes the setting of its type (which affects the size of its eRP
table, for example) and its registration with the eRP core.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Make global TCAM resources available to regions
Ido Schimmel [Wed, 25 Jul 2018 06:24:02 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Make global TCAM resources available to regions

Each TCAM region currently uses its own resources and there is no
sharing between the different regions.

This is going to change with A-TCAM as each region will need to allocate
an eRP table from the global eRP tables array.

Make the global TCAM resources available to each region by passing the
TCAM private data to the region initialization routine.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Encapsulate C-TCAM region in A-TCAM region
Ido Schimmel [Wed, 25 Jul 2018 06:24:01 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Encapsulate C-TCAM region in A-TCAM region

In Spectrum-2 the C-TCAM is only used for rules that can't fit in the
A-TCAM due to a limited number of masks per A-TCAM region.

In addition, rules inserted into the C-TCAM may affect rules residing in
the A-TCAM, by clearing their C-TCAM prune bit.

The two regions are thus closely related and can be thought of as if the
C-TCAM region is encapsulated in the A-TCAM one.

Change the data structures to reflect that before introducing A-TCAM
support and make C-TCAM region initialization part of the A-TCAM region
initialization sequence.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Add A-TCAM initialization
Ido Schimmel [Wed, 25 Jul 2018 06:24:00 +0000 (09:24 +0300)]
mlxsw: spectrum_acl: Add A-TCAM initialization

Initialize the A-TCAM as part of the driver's initialization routine.

Specifically, initialize the eRP tables so that A-TCAM regions will be
able to perform allocations of eRP tables upon rule insertion in
subsequent patches.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Allow encoding a partial key
Ido Schimmel [Wed, 25 Jul 2018 06:23:59 +0000 (09:23 +0300)]
mlxsw: spectrum_acl: Allow encoding a partial key

When working with 12 key blocks in the A-TCAM, rules are split into two
records, which constitute two lookups. The two records are linked using
a "large entry key ID". The ID is assigned to key blocks 6 to 11 and
resolved during the first lookup. The second lookup is performed using
the ID and the remaining key blocks.

Allow encoding a partial key so that it can be later used to check if an
ID can be reused.

This is done by adding two arguments to the existing encode function
that specify the range of the block indexes we would like to encode. The
key and mask arguments become optional, as we will not need to encode
both of them all the time.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Extend Spectrum-2 region struct
Ido Schimmel [Wed, 25 Jul 2018 06:23:58 +0000 (09:23 +0300)]
mlxsw: spectrum_acl: Extend Spectrum-2 region struct

In a similar fashion to Spectrum-1's region struct, Spectrum-2's struct
needs to store a pointer to the common region struct.

The pointer will be used in follow-up patches that implement rules
insertion and deletion.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Add support for C-TCAM eRPs
Ido Schimmel [Wed, 25 Jul 2018 06:23:57 +0000 (09:23 +0300)]
mlxsw: spectrum_acl: Add support for C-TCAM eRPs

The number of eRPs that can be used by a single A-TCAM region is limited
to 16. When more eRPs are needed, an ordinary circuit TCAM (C-TCAM) can
be used to hold the extra eRPs.

Unlike the A-TCAM, only a single (last) lookup is performed in the
C-TCAM and not a lookup per-eRP. However, modeling the C-TCAM as extra
eRPs will allow us to easily introduce support for pruning in a
follow-up patch set and is also logically correct.

The following diagram depicts the relation between both TCAMs:
                                                                 C-TCAM
+-------------------+               +--------------------+    +-----------+
|                   |               |                    |    |           |
|  eRP #1 (A-TCAM)  +----> ... +----+  eRP #16 (A-TCAM)  +----+  eRP #17  |
|                   |               |                    |    |    ...    |
+-------------------+               +--------------------+    |  eRP #N   |
                                                              |           |
                                                              +-----------+
Lookup order is from left to right.

Extend the eRP core APIs with a C-TCAM parameter which indicates whether
the requested eRP is to be used with the C-TCAM or not.

Since the C-TCAM is only meant to absorb rules that can't fit in the
A-TCAM due to exceeded number of eRPs or key collision, an error is
returned when a C-TCAM eRP needs to be created when the eRP state
machine is in its initial state (i.e., 'no masks'). This should only
happen in the face of very unlikely errors when trying to push rules
into the A-TCAM.

In order not to perform unnecessary lookups, the eRP core will only
enable a C-TCAM lookup for a given region if it knows there are C-TCAM
eRPs present.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Enable C-TCAM only mode in eRP core
Ido Schimmel [Wed, 25 Jul 2018 06:23:56 +0000 (09:23 +0300)]
mlxsw: spectrum_acl: Enable C-TCAM only mode in eRP core

Currently, no calls are performed into the eRP core, but in order to
make review easier we would like to gradually add these calls.

Have the eRP core initialize a region's master mask to all ones and
allow it to use an empty eRP table. This directs the lookup to the
C-TCAM and allows the C-TCAM only mode to continue working.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_acl: Implement common eRP core
Ido Schimmel [Wed, 25 Jul 2018 06:23:55 +0000 (09:23 +0300)]
mlxsw: spectrum_acl: Implement common eRP core

When rules are inserted into the A-TCAM they are associated with a mask,
which is part of the lookup key: { masked key, mask ID, region ID }.

These masks are called rule patterns (RP) and the aggregation of several
masks into one (to be introduced in follow-up patch sets) is called an
extended RP (eRP).

When a packet undergoes a lookup in an ACL region it is masked by the
current set of eRPs used by the region, looking for an exact match.
Eventually, the rule with the highest priority is picked.

These eRPs are stored in several global banks to allow for lookup to
occur using several eRPs simultaneously.

At first, an ACL region will only require a single mask - upon the
insertion of the first rule. In this case, the region can use the
"master RP" which is composed by OR-ing all the masks used by the
region. This mask is a property of the region and thus there is no need
to use the above mentioned banks.

At some point, a second mask will be needed. In this case, the region
will need to allocate an eRP table from the above mentioned banks and
insert its masks there.

>From now on, upon lookup, the eRP table used by the region will be
fetched from the eRP banks - using {eRP bank, Index within the bank} -
and the eRPs present in the table will be used to mask the packet. Note
that masks with consecutive indexes are inserted into consecutive banks.

When rules are deleted and a region only needs a single mask once again
it can free its eRP table and use the master RP.

The above logic is implemented in the eRP core and represented using the
following state machine:

    +------------+   create mask - as master RP   +---------------+
    |            +-------------------------------->               |
    |  no masks  |                                |  single mask  |
    |            <--------------------------------+               |
    +------------+          delete mask           +-----+--^------+
                                                        |  |
                                                        |  |
                                  create mask -         |  |  delete mask -
    create mask                   transition to use eRP |  |  transition to
     +--------+                   table                 |  |  use master RP
     |        |                                         |  |
     |        |                                         |  |
+----v--------+----+         create mask           +----v--+-----+
|                  <-------------------------------+             |
|  multiple masks  |                               |  two masks  |
|                  +------------------------------->             |
+------------------+      delete mask - if two     +-------------+
                          remaining

The code that actually configures rules in the A-TCAM will interface
with the eRP core by getting or putting an eRP based on the required
mask used by the rule.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: resources: Add Spectrum-2 eRP resources
Ido Schimmel [Wed, 25 Jul 2018 06:23:54 +0000 (09:23 +0300)]
mlxsw: resources: Add Spectrum-2 eRP resources

Add the following resources to be used by A-TCAM code:
* Maximum number of eRP banks
* Maximum size of eRP bank
* Number of eRP entries required for a 2/4/8/12 key blocks mask

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: resources: Add Spectrum-2 maximum large key ID resource
Ido Schimmel [Wed, 25 Jul 2018 06:23:53 +0000 (09:23 +0300)]
mlxsw: resources: Add Spectrum-2 maximum large key ID resource

Add a resource to make sure we do not exceed the maximum number of
supported large key IDs in a region.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: reg: Add Policy-Engine eRP Table Register
Ido Schimmel [Wed, 25 Jul 2018 06:23:52 +0000 (09:23 +0300)]
mlxsw: reg: Add Policy-Engine eRP Table Register

The register is used to add and delete eRPs from the eRP table.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: reg: Add Policy-Engine TCAM Entry Register Version 3
Ido Schimmel [Wed, 25 Jul 2018 06:23:51 +0000 (09:23 +0300)]
mlxsw: reg: Add Policy-Engine TCAM Entry Register Version 3

The register is used to configure rules in the A-TCAM.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: reg: Prepare PERERP register for A-TCAM usage
Ido Schimmel [Wed, 25 Jul 2018 06:23:50 +0000 (09:23 +0300)]
mlxsw: reg: Prepare PERERP register for A-TCAM usage

Before introducing A-TCAM support we need to make sure all the necessary
fields are configurable and not hard coded to values that worked for the
C-TCAM only use case.

This includes - for example - the ability to configure the eRP table
used by the TCAM region.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agolan743x: Make symbol lan743x_pm_ops static
Wei Yongjun [Wed, 25 Jul 2018 06:11:16 +0000 (06:11 +0000)]
lan743x: Make symbol lan743x_pm_ops static

Fixes the following sparse warning:

drivers/net/ethernet/microchip/lan743x_main.c:2944:25: warning:
 symbol 'lan743x_pm_ops' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: make function tcp_retransmit_stamp() static
Wei Yongjun [Wed, 25 Jul 2018 06:06:07 +0000 (06:06 +0000)]
tcp: make function tcp_retransmit_stamp() static

Fixes the following sparse warnings:

net/ipv4/tcp_timer.c:25:5: warning:
 symbol 'tcp_retransmit_stamp' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: cls_flower: Use correct inline function for assignment of vlan tpid
Jianbo Liu [Wed, 25 Jul 2018 02:31:25 +0000 (02:31 +0000)]
net/sched: cls_flower: Use correct inline function for assignment of vlan tpid

This fixes the following sparse warning:

net/sched/cls_flower.c:1356:36: warning: incorrect type in argument 3 (different base types)
net/sched/cls_flower.c:1356:36: expected unsigned short [unsigned] [usertype] value
net/sched/cls_flower.c:1356:36: got restricted __be16 [usertype] vlan_tpid

Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx4_core: Allow MTTs starting at any index
Tariq Toukan [Tue, 24 Jul 2018 11:31:45 +0000 (14:31 +0300)]
net/mlx4_core: Allow MTTs starting at any index

Allow obtaining MTTs starting at any index,
thus give a better cache utilization.

For this, allow setting log_mtts_per_seg to 0, and use
this in default.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Anaty Rahamim Bar Kat <anaty@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mlx5-Offload-setting-matching-on-tunnel-tos-ttl'
David S. Miller [Wed, 25 Jul 2018 23:28:58 +0000 (16:28 -0700)]
Merge branch 'mlx5-Offload-setting-matching-on-tunnel-tos-ttl'

Or Gerlitz says:

====================
net/mlx5: Offload setting/matching on tunnel tos/ttl

This series enables mlx5 offloading of tc eswitch rules that set
tos/ttl (encap) or match on them (decap) for tunnels.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx5e: Offload TC matching on tos/ttl for ip tunnels
Or Gerlitz [Tue, 24 Jul 2018 10:59:35 +0000 (13:59 +0300)]
net/mlx5e: Offload TC matching on tos/ttl for ip tunnels

Enable offloading of TC matching on tos/ttl for ipv4/6 tunnels.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx5e: Support setup of tos and ttl for tunnel key TC action offload
Or Gerlitz [Tue, 24 Jul 2018 10:59:34 +0000 (13:59 +0300)]
net/mlx5e: Support setup of tos and ttl for tunnel key TC action offload

Use the values provided by user-space for the encapsulation headers.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx5e: Use ttl from route lookup on tc encap offload only if needed
Or Gerlitz [Tue, 24 Jul 2018 10:59:33 +0000 (13:59 +0300)]
net/mlx5e: Use ttl from route lookup on tc encap offload only if needed

Currnetly, the ttl for the encapsulation headers is taken from the
route lookup result. As a pre-step to allow for an offload case when
the user specifies the ttl, take it from the route lookup only if
not zero. While here, also move to use u8 instead int for the ttl.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovxge: Remove unnecessary include of <linux/pci_hotplug.h>
Bjorn Helgaas [Mon, 23 Jul 2018 20:59:46 +0000 (15:59 -0500)]
vxge: Remove unnecessary include of <linux/pci_hotplug.h>

The vxge driver doesn't need anything provided by pci_hotplug.h, so remove
the unnecessary include of it.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: phy: add helper phy_polling_mode
Heiner Kallweit [Mon, 23 Jul 2018 19:40:07 +0000 (21:40 +0200)]
net: phy: add helper phy_polling_mode

Add a helper for checking whether polling is used to detect PHY status
changes.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: fs-enet: Use generic CRC32 implementation
Krzysztof Kozlowski [Mon, 23 Jul 2018 16:20:20 +0000 (18:20 +0200)]
net: ethernet: fs-enet: Use generic CRC32 implementation

Use generic kernel CRC32 implementation because it:
1. Should be faster (uses lookup tables),
2. Removes duplicated CRC generation code,
3. Uses well-proven algorithm instead of coding it one more time.

Suggested-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: freescale: Use generic CRC32 implementation
Krzysztof Kozlowski [Mon, 23 Jul 2018 16:19:14 +0000 (18:19 +0200)]
net: ethernet: freescale: Use generic CRC32 implementation

Use generic kernel CRC32 implementation because it:
1. Should be faster (uses lookup tables),
2. Removes duplicated CRC generation code,
3. Uses well-proven algorithm instead of coding it one more time.

Suggested-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg
Camelia Groza [Mon, 23 Jul 2018 15:06:15 +0000 (18:06 +0300)]
net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg

genphy_config_aneg() should be called only by PHYs that implement
the Clause 22 register set. Prevent Clause 45 PHYs that don't implement
the register set from calling the genphy function.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'virtio_net-Add-ethtool-stat-items'
David S. Miller [Wed, 25 Jul 2018 19:53:38 +0000 (12:53 -0700)]
Merge branch 'virtio_net-Add-ethtool-stat-items'

Toshiaki Makita says:

====================
virtio_net: Add ethtool stat items

Add some ethtool stat items useful for performance analysis.
====================

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Add kick stats
Toshiaki Makita [Mon, 23 Jul 2018 14:36:09 +0000 (23:36 +0900)]
virtio_net: Add kick stats

So we can infer the number of VM-Exits.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Add XDP related stats
Toshiaki Makita [Mon, 23 Jul 2018 14:36:08 +0000 (23:36 +0900)]
virtio_net: Add XDP related stats

Add counters below:
* Tx
 - xdp_tx: frames sent by ndo_xdp_xmit or XDP_TX.
 - xdp_tx_drops: dropped frames out of xdp_tx ones.
* Rx
 - xdp_packets: frames went through xdp program.
 - xdp_tx: XDP_TX frames.
 - xdp_redirects: XDP_REDIRECT frames.
 - xdp_drops: any dropped frames out of xdp_packets ones.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Factor out the logic to determine xdp sq
Toshiaki Makita [Mon, 23 Jul 2018 14:36:07 +0000 (23:36 +0900)]
virtio_net: Factor out the logic to determine xdp sq

Make sure to use the same logic in all places to determine xdp sq. This
is useful for xdp counters which the following commit will introduce as
well.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Make drop counter per-queue
Toshiaki Makita [Mon, 23 Jul 2018 14:36:06 +0000 (23:36 +0900)]
virtio_net: Make drop counter per-queue

Since when XDP was introduced, drop counter has been able to be updated
much more frequently than before, as XDP_DROP increments the counter.
Thus for performance analysis per-queue drop counter would be useful.

Also this avoids cache contention and race on updating the counter. It
is currently racy because napi handlers read-modify-write it without any
locks.

There are more counters in dev->stats that are racy, but I left them
per-device, because they are rarely updated and does not worth being
per-queue counters IMHO. To fix them we need atomic ops or some kind of
locks.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Use temporary storage for accounting rx stats
Toshiaki Makita [Mon, 23 Jul 2018 14:36:05 +0000 (23:36 +0900)]
virtio_net: Use temporary storage for accounting rx stats

The purpose is to keep receive_buf arguments simple when more per-queue
counter items are added later.
Also XDP_TX related sq counters will be updated in the following changes
so create a container struct virtnet_rx_stats which will includes both
rq and sq statistics. For now it only covers rq stats.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio_net: Fix incosistent received bytes counter
Toshiaki Makita [Mon, 23 Jul 2018 14:36:04 +0000 (23:36 +0900)]
virtio_net: Fix incosistent received bytes counter

When received packets are dropped in virtio_net driver, received packets
counter is incremented but bytes counter is not.
As a result, for instance if we drop all packets by XDP, only received
is counted and bytes stays 0, which looks inconsistent.
IMHO received packets/bytes should be counted if packets are produced by
the hypervisor, like what common NICs on physical machines are doing.
So fix the bytes counter.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net
David S. Miller [Wed, 25 Jul 2018 02:21:58 +0000 (19:21 -0700)]
Merge ra./pub/scm/linux/kernel/git/davem/net

3 years agoMerge tag 'mips_fixes_4.18_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
Linus Torvalds [Wed, 25 Jul 2018 01:11:15 +0000 (18:11 -0700)]
Merge tag 'mips_fixes_4.18_4' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:
 "A couple more MIPS fixes for 4.18:

   - Fix an off-by-one in reporting PCI resource sizes to userland which
     regressed in v3.12.

   - Fix writes to DDR controller registers used to flush write buffers,
     which regressed with some refactoring in v4.2"

* tag 'mips_fixes_4.18_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: ath79: fix register address in ath79_ddr_wb_flush()
  MIPS: Fix off-by-one in pci_resource_to_user()

3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 25 Jul 2018 00:31:47 +0000 (17:31 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Handle stations tied to AP_VLANs properly during mac80211 hw
    reconfig. From Manikanta Pubbisetty.

 2) Fix jump stack depth validation in nf_tables, from Taehee Yoo.

 3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran
    Ben Elisha.

 4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann.

 5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan.

 6) Fix cached netdev name leak in nf_tables, from Florian Westphal.

 7) Fix memory leaks on chain rename, also from Florian Westphal.

 8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk
    Cheng.

 9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing.

10) Fix link local address handling with VRF, from David Ahern.

11) Don't clobber 'err' on a successful call to __skb_linearize() in
    skb_segment(). From Eric Dumazet.

12) Fix vxlan fdb notification races, from Roopa Prabhu.

13) Hash UDP fragments consistently, from Paolo Abeni.

14) If TCP receives lots of out of order tiny packets, we do really
    silly stuff. Make the out-of-order queue ending more robust to this
    kind of behavior, from Eric Dumazet.

15) Don't leak netlink dump state in nf_tables, from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net: axienet: Fix double deregister of mdio
  qmi_wwan: fix interface number for DW5821e production firmware
  ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
  bnx2x: Fix invalid memory access in rss hash config path.
  net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
  r8169: restore previous behavior to accept BIOS WoL settings
  cfg80211: never ignore user regulatory hint
  sock: fix sg page frag coalescing in sk_alloc_sg
  netfilter: nf_tables: move dumper state allocation into ->start
  tcp: add tcp_ooo_try_coalesce() helper
  tcp: call tcp_drop() from tcp_data_queue_ofo()
  tcp: detect malicious patterns in tcp_collapse_ofo_queue()
  tcp: avoid collapses in tcp_prune_queue() if possible
  tcp: free batches of packets in tcp_prune_ofo_queue()
  ip: hash fragments consistently
  ipv6: use fib6_info_hold_safe() when necessary
  can: xilinx_can: fix power management handling
  can: xilinx_can: fix incorrect clear of non-processed interrupts
  can: xilinx_can: fix RX overflow interrupt not being enabled
  can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
  ...

3 years agonet: axienet: Fix double deregister of mdio
Shubhrajyoti Datta [Tue, 24 Jul 2018 04:39:53 +0000 (10:09 +0530)]
net: axienet: Fix double deregister of mdio

If the registration fails then mdio_unregister is called.
However at unbind the unregister ia attempted again resulting
in the below crash

[   73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415!
[   73.549362] Internal error: Oops - BUG: 0 [#1] SMP
[   73.554127] Modules linked in:
[   73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183
[   73.562895] Hardware name: xlnx,zynqmp (DT)
[   73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000
[   73.572973] PC is at mdiobus_unregister+0x84/0x88
[   73.577656] LR is at axienet_mdio_teardown+0x18/0x30
[   73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>]
pstate: 20000145
[   73.589981] sp : ffffff800cbe3c30
[   73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180
[   73.598573] x27: ffffff8008a21000 x26: 0000000000000040
[   73.603868] x25: 0000000000000124 x24: ffffffc879efe920
[   73.609164] x23: 0000000000000060 x22: ffffffc879e02000
[   73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870
[   73.619754] x19: ffffffc879e02800 x18: 000000000000025d
[   73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8
[   73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010
[   73.635640] x13: 74656e7265687465 x12: 0000000000000030
[   73.640935] x11: 0000000000000030 x10: 0101010101010101
[   73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98
[   73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318
[   73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000
[   73.662117] x3 : 0000000000000000 x2 : 0000000000000008
[   73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000
[   73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000)

Fix the same by making the bus NULL on unregister.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqmi_wwan: fix interface number for DW5821e production firmware
Aleksander Morgado [Mon, 23 Jul 2018 23:31:07 +0000 (01:31 +0200)]
qmi_wwan: fix interface number for DW5821e production firmware

The original mapping for the DW5821e was done using a development
version of the firmware. Confirmed with the vendor that the final
USB layout ends up exposing the QMI control/data ports in USB
config #1, interface #0, not in interface #1 (which is now a HID
interface).

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module")
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
Willem de Bruijn [Mon, 23 Jul 2018 23:36:48 +0000 (19:36 -0400)]
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull

Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:

  BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
  CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x185/0x1d0 lib/dump_stack.c:113
    kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
    kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
    kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
    copy_to_user include/linux/uaccess.h:184 [inline]
    put_cmsg+0x5ef/0x860 net/core/scm.c:242
    ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
    ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
    rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
    [..]

This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.

With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.

Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.

Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobnx2x: Fix invalid memory access in rss hash config path.
Sudarsana Reddy Kalluru [Tue, 24 Jul 2018 09:43:52 +0000 (02:43 -0700)]
bnx2x: Fix invalid memory access in rss hash config path.

Rx hash/filter table configuration uses rss_conf_obj to configure filters
in the hardware. This object is initialized only when the interface is
brought up.
This patch adds driver changes to configure rss params only when the device
is in opened state. In port disabled case, the config will be cached in the
driver structure which will be applied in the successive load path.

Please consider applying it to 'net' branch.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
Jack Morgenstein [Tue, 24 Jul 2018 11:27:55 +0000 (14:27 +0300)]
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper

Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp
context, rather than the one passed in the input modifier.

However, the qp number in the qp context is not defined as a
required parameter by the FW. Therefore, drivers may choose to not
specify the qp number in the qp context for the reset-to-init transition.

Thus, we must save the qp number passed in the command input modifier --
which is always present. (This saved qp number is used as the input
modifier for command 2RST_QP when a slave's qp's are destroyed).

Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: add skbprio scheduler
Nishanth Devarajan [Mon, 23 Jul 2018 14:07:41 +0000 (19:37 +0530)]
net/sched: add skbprio scheduler

Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets
according to their skb->priority field. Under congestion, already-enqueued lower
priority packets will be dropped to make space available for higher priority
packets. Skbprio was conceived as a solution for denial-of-service defenses that
need to route packets with different priorities as a means to overcome DoS
attacks.

v5
*Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set
default sch->limit to 64.

v4
*Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man
page for Skbprio, in iproute2.

v3
*Drop max_limit parameter in struct skbprio_sched_data and instead use
sch->limit.

*Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for
qdisc (previously being referenced every time qdisc changes).

*Move qdisc's detailed description from in-code to Documentation/networking.

*When qdisc is saturated, enqueue incoming packet first before dequeueing
lowest priority packet in queue - improves usage of call stack registers.

*Introduce and use overlimit stat to keep track of number of dropped packets.

v2
*Use skb->priority field rather than DS field. Rename queueing discipline as
SKB Priority Queue (previously Gatekeeper Priority Queue).

*Queueing discipline is made classful to expose Skbprio's internal priority
queues.

Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com>
Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com>
Reviewed-by: Cody Doucette <doucette@bu.edu>
Reviewed-by: Michel Machado <michel@digirati.com.br>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: phy: add GBit master / slave error detection
Heiner Kallweit [Sat, 21 Jul 2018 13:48:47 +0000 (15:48 +0200)]
net: phy: add GBit master / slave error detection

Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'net-whitespace-cleanups'
David S. Miller [Tue, 24 Jul 2018 21:10:43 +0000 (14:10 -0700)]
Merge branch 'net-whitespace-cleanups'

Stephen Hemminger says:

====================
net whitespace cleanups

Ran script that I use to check for trailing whitespace and
blank lines at end of files across all files in net/ directory.
These are errors that checkpatch reports and git flags.

These are the resulting fixes broken up mostly by subsystem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: remove blank lines at end of file
Stephen Hemminger [Tue, 24 Jul 2018 19:29:18 +0000 (12:29 -0700)]
net: remove blank lines at end of file

Several files have extra line at end of file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agol2tp: remove trailing newline
Stephen Hemminger [Tue, 24 Jul 2018 19:29:17 +0000 (12:29 -0700)]
l2tp: remove trailing newline

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobpfilter: remove trailing newline
Stephen Hemminger [Tue, 24 Jul 2018 19:29:16 +0000 (12:29 -0700)]
bpfilter: remove trailing newline

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodecnet: whitespace fixes
Stephen Hemminger [Tue, 24 Jul 2018 19:29:14 +0000 (12:29 -0700)]
decnet: whitespace fixes

Remove trailing whitespace and extra lines at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agox25: remove blank lines at EOF
Stephen Hemminger [Tue, 24 Jul 2018 19:29:13 +0000 (12:29 -0700)]
x25: remove blank lines at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoax25: remove blank line at EOF
Stephen Hemminger [Tue, 24 Jul 2018 19:29:12 +0000 (12:29 -0700)]
ax25: remove blank line at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoatm: remove blank lines at EOF
Stephen Hemminger [Tue, 24 Jul 2018 19:29:11 +0000 (12:29 -0700)]
atm: remove blank lines at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoila: remove blank lines at EOF
Stephen Hemminger [Tue, 24 Jul 2018 19:29:09 +0000 (12:29 -0700)]
ila: remove blank lines at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosctp: whitespace fixes
Stephen Hemminger [Tue, 24 Jul 2018 19:29:08 +0000 (12:29 -0700)]
sctp: whitespace fixes

Remove blank line at EOF and trailing whitespace.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoxfrm: remove blank lines at EOF
Stephen Hemminger [Tue, 24 Jul 2018 19:29:06 +0000 (12:29 -0700)]
xfrm: remove blank lines at EOF

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>