sfrench/cifs-2.6.git
6 years agodrm/radeon: Use correct value for unknown audio/video latency
Stefan Brüns [Sat, 12 Jul 2014 23:47:14 +0000 (01:47 +0200)]
drm/radeon: Use correct value for unknown audio/video latency

Valid values are 1 to 251 for 0 to 500 ms latency, 0 for unknown
and 255 for audio/video unsupported by sink, according to HDMI 1.3 spec.
Also matches Radeon HDA verb 0xf7b documentation.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: Inline r100_mm_rreg, -wreg, v3
Lauri Kasanen [Sun, 20 Apr 2014 17:29:33 +0000 (20:29 +0300)]
drm/radeon: Inline r100_mm_rreg, -wreg, v3

This was originally un-inlined by Andi Kleen in 2011 citing size concerns.
Indeed, a first attempt at inlining it grew radeon.ko by 7%.

However, 2% of cpu is spent in this function. Simply inlining it gave 1% more fps
in Urban Terror.

v2: We know the minimum MMIO size. Adding it to the if allows the compiler to
optimize the branch out, improving both performance and size.

The v2 patch decreases radeon.ko size by 2%. I didn't re-benchmark, but common sense
says perf is now more than 1% better.

v3: Also change _wreg, make the threshold a define.

Inlining _wreg increased the size a bit compared to v2, so now radeon.ko
is only 1% smaller.

Signed-off-by: Lauri Kasanen <cand@gmx.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: consolidate vga and dvi get_modes functions (v2)
Alex Deucher [Thu, 10 Jul 2014 17:07:19 +0000 (13:07 -0400)]
drm/radeon: consolidate vga and dvi get_modes functions (v2)

They are identical.

v2: rebase

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: enable display scaling on all connectors (v2)
Alex Deucher [Wed, 9 Jul 2014 17:21:59 +0000 (13:21 -0400)]
drm/radeon: enable display scaling on all connectors (v2)

This enables the display scaler on all connectors for r5xx
and newer asics.  Previously we only enabled the scaler for
fixed mode displays (eDP or LVDS) since they have to use the
scaler to support non-native modes.  Most other displays
are multi-sync or have a built in scaler to support non-native
modes.  The default scaling mode for non-fixed displays is
none which will use the scaler in the monitor.  Note that
we do not populate any fake modes like we do for fixed
displays so it will only use the modes in the edid.  For
other modes, you'll need to populate them manually.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80868

v2: properly handle scaling with no modes defined

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: remove null test before kfree
Fabian Frederick [Fri, 4 Jul 2014 19:37:09 +0000 (21:37 +0200)]
drm/radeon: remove null test before kfree

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon/cik: Add support for new ucode format (v5)
Alex Deucher [Wed, 25 Jun 2014 23:32:36 +0000 (19:32 -0400)]
drm/radeon/cik: Add support for new ucode format (v5)

This adds CIK support for the new ucode format.

v2: add size validation, integrate debug info
v3: add support for MEC2 on KV
v4: fix typos
v4: update to latest format

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon/si: Add support for new ucode format (v3)
Alex Deucher [Wed, 25 Jun 2014 22:41:34 +0000 (18:41 -0400)]
drm/radeon/si: Add support for new ucode format (v3)

This adds SI support for the new ucode format.

v2: add size validation, integrate debug info
v3: update to latest version

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: add new firmware header definitions (v3)
Alex Deucher [Wed, 25 Jun 2014 19:54:46 +0000 (15:54 -0400)]
drm/radeon: add new firmware header definitions (v3)

These are needed to properly handle more frequently
updated firmware.

v2: add new firmware helper functions as well.
v3: update to latest format

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon: disable gfx cgcg on cik
Alex Deucher [Thu, 26 Jun 2014 22:36:24 +0000 (18:36 -0400)]
drm/radeon: disable gfx cgcg on cik

This needs some tweaking to be stable with newer
ucode versions.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/radeon/dpm: add support for SVI2 voltage for SI
Alex Deucher [Fri, 6 Jun 2014 22:43:45 +0000 (18:43 -0400)]
drm/radeon/dpm: add support for SVI2 voltage for SI

Some newer boards use SVI2 for voltage control rather
than GPIO.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/ttm: Pass GFP flags in order to avoid deadlock.
Tetsuo Handa [Sun, 3 Aug 2014 11:02:31 +0000 (20:02 +0900)]
drm/ttm: Pass GFP flags in order to avoid deadlock.

Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added
deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free()
are currently doing GFP_KERNEL allocation.

But these functions did not get updated to receive gfp_t argument.
This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions,
and removes the deadlock warning.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/ttm: Fix possible stack overflow by recursive shrinker calls.
Tetsuo Handa [Sun, 3 Aug 2014 11:02:03 +0000 (20:02 +0900)]
drm/ttm: Fix possible stack overflow by recursive shrinker calls.

While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL
allocation, ttm_pool_shrink_scan() does not do it. This can result in stack
overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to
memory pressure.

  shrink_slab()
  => ttm_pool_shrink_scan()
     => ttm_page_pool_free()
        => kmalloc(GFP_KERNEL)
           => shrink_slab()
              => ttm_pool_shrink_scan()
                 => ttm_page_pool_free()
                    => kmalloc(GFP_KERNEL)

Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/ttm: Use mutex_trylock() to avoid deadlock inside shrinker functions.
Tetsuo Handa [Sun, 3 Aug 2014 11:01:10 +0000 (20:01 +0900)]
drm/ttm: Use mutex_trylock() to avoid deadlock inside shrinker functions.

I can observe that RHEL7 environment stalls with 100% CPU usage when a
certain type of memory pressure is given. While the shrinker functions
are called by shrink_slab() before the OOM killer is triggered, the stall
lasts for many minutes.

One of reasons of this stall is that
ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and
are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with
_manager->lock held causes someone (including kswapd) to deadlock when
these functions are called due to memory pressure. This patch changes
"mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to
avoid deadlock.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/ttm: Choose a pool to shrink correctly in ttm_dma_pool_shrink_scan().
Tetsuo Handa [Sun, 3 Aug 2014 11:00:40 +0000 (20:00 +0900)]
drm/ttm: Choose a pool to shrink correctly in ttm_dma_pool_shrink_scan().

We can use "unsigned int" instead of "atomic_t" by updating start_pool
variable under _manager->lock. This patch will make it possible to avoid
skipping when choosing a pool to shrink in round-robin style, after next
patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/ttm: Fix possible division by 0 in ttm_dma_pool_shrink_scan().
Tetsuo Handa [Sun, 3 Aug 2014 10:59:35 +0000 (19:59 +0900)]
drm/ttm: Fix possible division by 0 in ttm_dma_pool_shrink_scan().

list_empty(&_manager->pools) being false before taking _manager->lock
does not guarantee that _manager->npools != 0 after taking _manager->lock
because _manager->npools is updated under _manager->lock.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/tda998x: update for new drm connector APIs.
Dave Airlie [Tue, 5 Aug 2014 00:34:33 +0000 (10:34 +1000)]
drm/tda998x: update for new drm connector APIs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/sti: fix warning in build.
Dave Airlie [Mon, 4 Aug 2014 23:41:42 +0000 (09:41 +1000)]
drm/sti: fix warning in build.

Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agoMerge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard...
Dave Airlie [Mon, 4 Aug 2014 23:28:37 +0000 (09:28 +1000)]
Merge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This series of patches add the support of DRM/KMS drivers for STMicroelectronics
chipsets stih416 and stih407.

Hardware is split in two main blocks: Compositor and TVout. Each of them
includes specific hardware IPs and the display timing are controlled by a specific
Video Timing Generator hardware IP (VTG).

Compositor is made of the follow hardware IPs:
 - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB)
   buffers
 - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers
 - HQVDP (High Quality Video Display Processor) that supports scaling,
   deinterlacing and some miscellaneous image quality improvements.
   It fetches the Video decoded buffers from memory, processes them and pushes
   them to the Compositor through a HW dedicated bus.
 - Mixer is responsible of mixing all the entries depending of their
   respective z-order and layout

TVout is divided in 3 parts:
 - HDMI to generate HDMI signals, depending of chipset version HDMI phy can
   change.
 - HDA to generate signals for HD analog TV
 - VIP to control/switch data path coming from Compositor

On stih416 compositor and Tvout are on different dies so a Video Trafic Advance
inter-die Communication mechanism (VTAC) is needed.

+---------------------------------------------+   +----------------------------------------+
| +-------------------------------+   +----+  |   |  +----+   +--------------------------+ |
| |                               |   |    |  |   |  |    |   |  +---------+     +----+  | |
| | +----+              +------+  |   |    |  |   |  |    |   |  | VIP     |---->|HDMI|  | |
| | |GPD +------------->|      |  |   |    |  |   |  |    |   |  |         |     +----+  | |
| | +----+              |Mixer |--|-->|    |  |   |  |    |---|->| switcher|             | |
| |                     |      |  |   |    |  |   |  |    |   |  |         |     +----+  | |
| |                     |      |  |   |    |  |   |  |    |   |  |         |---->|HDA |  | |
| |                     +------+  |   |VTAC|========>|VTAC|   |  +---------+     +----+  | |
| |                               |   |    |  |   |  |    |   |                          | |
| |         Compositor            |   |    |  |   |  |    |   |           TVout          | |
| +-------------------------------+   |    |  |   |  |    |   +--------------------------+ |
|                      ^              |    |  |   |  |    |             ^                  |
|                      |              |    |  |   |  |    |             |                  |
|               +--------------+      |    |  |   |  |    |      +-------------+           |
|               | VTG (master) |----->|    |  |   |  |    |----->| VTG (slave) |           |
|               +--------------+      +----+  |   |  +----+      +-------------+           |
|Digital die                                  |   |                              Analog Die|
+---------------------------------------------+   +----------------------------------------+

On stih407 Compositor and Tvout are on the same die

+-----------------------------------------------------------------+
| +-------------------------------+  +--------------------------+ |
| |                               |  |  +---------+     +----+  | |
| | +----+              +------+  |  |  | VIP     |---->|HDMI|  | |
| | |GPD +------------->|      |  |  |  |         |     +----+  | |
| | +----+              |Mixer |--|--|->| switcher|             | |
| | +----+   +-----+    |      |  |  |  |         |     +----+  | |
| | |VDP +-->+HQVDP+--->|      |  |  |  |         |---->|HDA |  | |
| | +----+   +-----+    +------+  |  |  +---------+     +----+  | |
| |                               |  |                          | |
| |         Compositor            |  |           TVout          | |
| +-------------------------------+  +--------------------------+ |
|                              ^        ^                         |
|                              |        |                         |
|                           +--------------+                      |
|                           |     VTG      |                      |
|                           +--------------+                      |
|Digital die                                                      |
+-----------------------------------------------------------------+

In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used
by HDMI driver to retrieve EDID for monitor.

To unify interfaces of GDP and VDP we create a "layer" interface called by
compositor to control both GPD and VDP.

Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions
to allocate frame buffer.

File naming convention is:
 - sti_* for IPs drivers
 - sti_drm_* for drm functions implementation.

* 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: Add DRM driver itself
  drm: sti: add Compositor
  drm: sti: add Mixer
  drm: sti: add VID layer
  drm: sti: add GDP layer
  drm: sti: add TVOut driver
  drm: sti: add HDA driver
  drm: sti: add HDMI driver
  drm: sti: add VTAC drivers
  drm: sti: add VTG driver
  drm: sti: add bindings for DRM driver

6 years agoMerge branch 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into...
Dave Airlie [Mon, 4 Aug 2014 23:26:09 +0000 (09:26 +1000)]
Merge branch 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next

This builds upon the previous set of fixes which were pulled on 6th July.
Included in this set are:
- an update from Jean-Francois to add the missing reg documentation entry
  to the device tree documentation.
- conversion of the tda998x driver to the component helpers.

* 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: add component support
  drm/i2c: tda998x: allow re-use of tda998x support code
  drm/i2c: tda998x: fix lack of required reg in DT documentation

Conflicts:
drivers/gpu/drm/i2c/tda998x_drv.c

6 years agoMerge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm...
Dave Airlie [Mon, 4 Aug 2014 23:22:27 +0000 (09:22 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

This time around we have a mix of new hw enablement (mdp5 v1.3 /
apq8084), plus devicetree and various upstream changes (mostly
adapting to CCF vs downstream clk driver differences) for mdp4 /
apq8064.  With these drm/msm patches plus a few other small patchsets
(from linaro qcom integration branch.. mostly stuff queued up for
3.17) we have the inforce ifc6410 board working, with gpu.  Much nicer
to work with than ancient vendor android branch :-)

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo
  drm/msm/hdmi: enable lpm-mux if it is present
  drm/msm/mdp5: add support for MDP5 v1.3
  drm/msm: fix potential deadlock in gpu init
  drm/msm: use upstream iommu
  drm/msm: no mmu is only error if not using vram carveout
  drm/msm: fix BUG_ON() in error cleanup path
  drm/msm/mdp4: add mdp axi clk
  drm/msm: hdmi phy 8960 phy pll
  drm/msm: update generated headers
  drm/msm: DT support for 8960/8064 (v3)
  drm/msm: Implement msm drm fb_mmap callback function
  drm/msm: activate iommu support
  drm/msm: fix double struct_mutex acquire

6 years agoMerge tag 'v3.16' into drm-next
Dave Airlie [Mon, 4 Aug 2014 23:04:59 +0000 (09:04 +1000)]
Merge tag 'v3.16' into drm-next

Linux 3.16

backmerge requested by i915, nouveau and radeon authors

Conflicts:
drivers/gpu/drm/i915/i915_gem_render_state.c
drivers/gpu/drm/i915/intel_drv.h

6 years agodrm/msm/hdmi: fix HDMI_MUX_EN gpio request typo
Beeresh Gopal [Thu, 31 Jul 2014 15:48:50 +0000 (11:48 -0400)]
drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo

HDMI_MUX_EN gpio is requested. If an error occurs, the same name
should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo).

Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/hdmi: enable lpm-mux if it is present
Beeresh Gopal [Thu, 31 Jul 2014 15:48:49 +0000 (11:48 -0400)]
drm/msm/hdmi: enable lpm-mux if it is present

lpm-mux is programmed to enable HDMI connector
on the docking station for S805 chipset based
devices.

Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp5: add support for MDP5 v1.3
Stephane Viau [Mon, 7 Jul 2014 14:34:01 +0000 (10:34 -0400)]
drm/msm/mdp5: add support for MDP5 v1.3

MDP5 has several functional blocks (ie: VIG/RGB pipes, LMs, ...).
From one revision to another, these blocks' base addresses might
change due to the number of instances present in the MDP5 hw.
A way of dealing with these offset changes is to introduce
dynamic offsets 'per block'.

This change adds support for the new revision of MDP5: v1.3.
The idea is to define one hw config per MDP version and select
either one of them at runtime, after reading the MDP5 version.

Once the MDP version is known, 'per block' dynamic offsets
are initialized through a global pointer, which is then used for
read/write register access.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: fix potential deadlock in gpu init
Rob Clark [Fri, 11 Jul 2014 15:59:22 +0000 (11:59 -0400)]
drm/msm: fix potential deadlock in gpu init

Somewhere along the way, the firmware loader sprouted another lock
dependency, resulting in possible deadlock scenario:

 &dev->struct_mutex --> &sb->s_type->i_mutex_key#2 --> &mm->mmap_sem

which is problematic vs things like gem mmap.

So introduce a separate mutex to synchronize gpu init.

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: use upstream iommu
Rob Clark [Thu, 10 Jul 2014 02:08:15 +0000 (22:08 -0400)]
drm/msm: use upstream iommu

Downstream kernel IOMMU had a non-standard way of dealing with multiple
devices and multiple ports/contexts.  We don't need that on upstream
kernel, so rip out the crazy.

Note that we have to move the pinning of the ringbuffer to after the
IOMMU is attached.  No idea how that managed to work properly on the
downstream kernel.

For now, I am leaving the IOMMU port name stuff in place, to simplify
things for folks trying to backport latest drm/msm to device kernels.
Once we no longer have to care about pre-DT kernels, we can drop this
and instead backport upstream IOMMU driver.

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: no mmu is only error if not using vram carveout
Rob Clark [Tue, 1 Jul 2014 18:49:55 +0000 (14:49 -0400)]
drm/msm: no mmu is only error if not using vram carveout

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: fix BUG_ON() in error cleanup path
Rob Clark [Tue, 1 Jul 2014 18:49:25 +0000 (14:49 -0400)]
drm/msm: fix BUG_ON() in error cleanup path

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp4: add mdp axi clk
Rob Clark [Mon, 30 Jun 2014 22:50:51 +0000 (18:50 -0400)]
drm/msm/mdp4: add mdp axi clk

Downstream kernel holds this clk via a fake-parent relationship.
Upstream clock framework requires that we hold it explicitly.

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: hdmi phy 8960 phy pll
Rob Clark [Wed, 25 Jun 2014 13:54:36 +0000 (09:54 -0400)]
drm/msm: hdmi phy 8960 phy pll

On downstream kernel the clk driver directly bangs hdmi phy registers.
For upstream kernel, we need to model this as a clock and register with
the clock framework.

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: update generated headers
Rob Clark [Wed, 25 Jun 2014 13:01:19 +0000 (09:01 -0400)]
drm/msm: update generated headers

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: DT support for 8960/8064 (v3)
Rob Clark [Sun, 15 Dec 2013 21:23:05 +0000 (16:23 -0500)]
drm/msm: DT support for 8960/8064 (v3)

Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
add necessary DT support so that we can use drm/msm on upstream kernel.

v2: update for review comments
v3: rebase on component helper changes

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: Implement msm drm fb_mmap callback function
Hai Li [Wed, 18 Jun 2014 20:55:27 +0000 (16:55 -0400)]
drm/msm: Implement msm drm fb_mmap callback function

This change implements msm drm specific fb_mmap function for fb device
to properly map the fb address to userspace.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com> (+ minor comment tweak)
6 years agodrm/msm: activate iommu support
Stephane Viau [Tue, 17 Jun 2014 14:32:38 +0000 (10:32 -0400)]
drm/msm: activate iommu support

This changes activates the iommu support for MDP5, through the
platform config structure.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: fix double struct_mutex acquire
Rob Clark [Sat, 28 Jun 2014 15:11:34 +0000 (11:11 -0400)]
drm/msm: fix double struct_mutex acquire

Mutex is already grabbed in show_locked().. somehow this slipped
through.

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agoMerge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm...
Dave Airlie [Mon, 4 Aug 2014 07:57:34 +0000 (17:57 +1000)]
Merge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel into drm-next

Final feature pull for 3.17.

drm-intel-next-2014-07-25:
- Ditch UMS support (well just the config option for now)
- Prep work for future platforms (Sonika Jindal, Damien)
- runtime pm/soix fixes (Paulo, Jesse)
- psr tracking improvements, locking fixes, now enabled by default!
- rps fixes for chv (Deepak, Ville)
- drm core patches for rotation support (Ville, Sagar Kamble) - the i915 parts
  unfortunately didn't make it yet
- userptr fixes (Chris)
- minimum backlight brightness (Jani), acked long ago by Matthew Garret on irc -
  I've forgotten about this patch :(

QA is a bit unhappy about the DP MST stuff since it broke hpd testing a
bit, but otherwise looks sane. I've backmerged drm-next to resolve
conflicts with the mst stuff, which means the new tag itself doesn't
contain the overview as usual.

* tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel: (75 commits)
  drm/i915/userptr: Keep spin_lock/unlock in the same block
  drm/i915: Allow overlapping userptr objects
  drm/i915: Ditch UMS config option
  drm/i915: respect the VBT minimum backlight brightness
  drm/i915: extract backlight minimum brightness from VBT
  drm/i915: Replace HAS_PCH_SPLIT which incorrectly lets some platforms in
  drm/i915: Returning from increase/decrease of pllclock when invalid
  drm/i915: Setting legacy palette correctly for different platforms
  drm/i915: Avoid incorrect returning for some platforms
  drm/i915: Writing proper check for reading of pipe status reg
  drm/i915: Returning the right VGA control reg for platforms
  drm/i915: Allowing changing of wm latencies for valid platforms
  drm/i915: Adding HAS_GMCH_DISPLAY macro
  drm/i915: Fix possible overflow when recording semaphore states.
  drm/i915: Do not unmap object unless no other VMAs reference it
  drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable
  drm/i915: Reorder ctx unref on ppgtt cleanup
  drm/i915/error: Check the potential ctx obj's vm
  drm/i915: Fix printing proper min/min/rpe values in debugfs
  drm/i915: BDW can also detect unclaimed registers
  ...

6 years agodrm: close race in connector registration (v2)
Dave Airlie [Thu, 24 Jul 2014 01:53:45 +0000 (11:53 +1000)]
drm: close race in connector registration (v2)

Daniel pointed out with hotplug that userspace could be trying to oops us
as root for lols, and that to be correct we shouldn't register the object
with the idr before we have fully set the connector object up.

His proposed solution was a lot more life changing, this seemed like a simpler
proposition to me, get the connector object id from the idr, but don't
register the object until the drm_connector_register callback.

The open question is whether the drm_mode_object_register needs a bigger lock
than just the idr one, but I can't see why it would, but I can be locking
challenged.

v2: fix bool noreg into sane - add comment.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm/i915: only hook up hpd pulse for DP outputs
Chris Wilson [Mon, 4 Aug 2014 06:15:09 +0000 (07:15 +0100)]
drm/i915: only hook up hpd pulse for DP outputs

On HSW+, the digital encoders are shared between HDMI and DP outputs,
with one encoder masquerading as both. The VBT should tell us if we need
to have DP or HDMI support on a particular port, but if we don't have DP
support and we enable the DP hpd pulse handler then we cause an oops.

Don't hook up the DP hpd handling if we don't have a DP port.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81856
Reported-by: Intel QA Team.
Signed-off-by: Dave Airlie <airlied@redhat.com> # v1
[ickle: Fix the error handling after a malloc failure]
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agoMerge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daein...
Dave Airlie [Mon, 4 Aug 2014 05:07:21 +0000 (15:07 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

   This pull request includes i80 interface support, module auto-loading
   ipp consolidation, and trivail fixups and cleanups.

Summary:
- Add i80 interface support. For this, we added some features to
  Exynos drm framework, which don't affect any other SoC and common
  framework because they are specific to Exynos drm.
- Add module auto-loading support. For this, sub drivers of Exynos drm
  exports their of match tables to userspace. This allows modules to be
  loaded automatically based on devicetree information
- Consolidate ipp driver. This patch just just includes cleanups and
  a littl bit refactoring codes.

If there is any problem, please kindly let me know.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (38 commits)
  drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail
  drm/exynos: g2d: make ioctls more robust
  drm/exynos: hdmi: add null check for hdmiphy_port
  drm/exynos: control blending of mixer graphic layer 0
  drm/exynos: Add MODULE_DEVICE_TABLE entries for various components
  Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"
  Subject: Revert "drm/exynos: fix module build error"
  drm/exynos/ipp: simplify ipp_find_driver
  drm/exynos/ipp: simplify ipp_create_id
  drm/exynos/ipp: remove redundant messages
  drm/exynos/ipp: simplify ipp_find_obj
  drm/exynos/ipp: remove useless registration checks
  drm/exynos/ipp: simplify memory check function
  drm/exynos/ipp: remove incorrect checks of list_first_entry result
  drm/exynos/ipp: remove temporary variable
  drm/exynos/ipp: correct address type
  drm/exynos/ipp: remove struct exynos_drm_ipp_private
  drm/exynos/ipp: remove unused field from exynos_drm_ipp_private
  drm/exynos/ipp: remove type casting
  drm/exynos: g2d: add exynos4212 as a compatible device.
  ...

6 years agodrm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail
Tobias Jakobi [Wed, 23 Jul 2014 14:57:13 +0000 (16:57 +0200)]
drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail

Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even
if no G2D support is available. Let the ioctl fail when this is the
case, so that userspace can accurately probe for G2D support.

This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't
fail when G2D is absent, leading to a segfault later.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: INki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: g2d: make ioctls more robust
Tobias Jakobi [Wed, 23 Jul 2014 14:57:12 +0000 (16:57 +0200)]
drm/exynos: g2d: make ioctls more robust

Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check
if the G2D was succesfully probe. If that is not the case, then g2d_priv
is just NULL and extracting 'dev' from it in the next step  is going to
produce a kernel oops.

Add proper checks and return ENODEV if the G2D is not available.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: INki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: hdmi: add null check for hdmiphy_port
Seung-Woo Kim [Mon, 28 Jul 2014 08:15:22 +0000 (17:15 +0900)]
drm/exynos: hdmi: add null check for hdmiphy_port

The hdmiphy can be apb and hdmiphy_port can be null. So before
accessing hdmiphy_port, it should be checked.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: control blending of mixer graphic layer 0
Joonyoung Shim [Fri, 25 Jul 2014 10:59:10 +0000 (19:59 +0900)]
drm/exynos: control blending of mixer graphic layer 0

The mixer graphic layer 0 isn't blended as default by commit
0377f4ed9f1aed30292c4e3c87f24e028ae26f36(drm/exynos: Don't blend mixer
layer 0). But it needs to be blended with graphic layer 0 if video layer
is enabled by vp because video layer is bottom.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: Add MODULE_DEVICE_TABLE entries for various components
Sjoerd Simons [Fri, 18 Jul 2014 20:36:41 +0000 (22:36 +0200)]
drm/exynos: Add MODULE_DEVICE_TABLE entries for various components

Add MODULE_DEVICE_TABLE calls for the various OF match tables that
currently don't have one. This allows the module to be
autoloaded based on devicetree information.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoSubject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"
Sjoerd Simons [Wed, 30 Jul 2014 02:29:41 +0000 (11:29 +0900)]
Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"

This reverts commit d089621896c3530a9bd309f96e9c9124d07f6c3f was
original to prevent multiple MODULE_DEVICE_TABLE in one module.
Which, as a side-effect broke autoloading of the module.

Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoSubject: Revert "drm/exynos: fix module build error"
Sjoerd Simons [Wed, 30 Jul 2014 02:28:31 +0000 (11:28 +0900)]
Subject: Revert "drm/exynos: fix module build error"

Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading

Conflicts:
drivers/gpu/drm/exynos/exynos_drm_fimd.c
drivers/gpu/drm/exynos/exynos_drm_g2d.c

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoLinux 3.16 v3.16
Linus Torvalds [Sun, 3 Aug 2014 22:25:02 +0000 (15:25 -0700)]
Linux 3.16

6 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 3 Aug 2014 16:58:20 +0000 (09:58 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Two fixes in the timer area:
   - a long-standing lock inversion due to a printk
   - suspend-related hrtimer corruption in sched_clock"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
  sched_clock: Avoid corrupting hrtimer tree during suspend

6 years agodrm/exynos/ipp: simplify ipp_find_driver
Andrzej Hajda [Thu, 3 Jul 2014 13:10:37 +0000 (15:10 +0200)]
drm/exynos/ipp: simplify ipp_find_driver

The patch puts repeated code sequence into one function, removes verbose
comments and decreases log verbosity.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: simplify ipp_create_id
Andrzej Hajda [Thu, 3 Jul 2014 13:10:36 +0000 (15:10 +0200)]
drm/exynos/ipp: simplify ipp_create_id

There is no gain in passing id by pointer to be filled.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove redundant messages
Andrzej Hajda [Thu, 3 Jul 2014 13:10:35 +0000 (15:10 +0200)]
drm/exynos/ipp: remove redundant messages

In case of error callback prints already corresponding message.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: simplify ipp_find_obj
Andrzej Hajda [Thu, 3 Jul 2014 13:10:34 +0000 (15:10 +0200)]
drm/exynos/ipp: simplify ipp_find_obj

The patch simplifies ipp_find_obj and removes debug messages.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove useless registration checks
Andrzej Hajda [Thu, 3 Jul 2014 13:10:33 +0000 (15:10 +0200)]
drm/exynos/ipp: remove useless registration checks

Argument checks are redundant, clients always check ippdrv before calling
these functions.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: simplify memory check function
Andrzej Hajda [Thu, 3 Jul 2014 13:10:32 +0000 (15:10 +0200)]
drm/exynos/ipp: simplify memory check function

The only thing function should check is if there are buffers in respective
queues.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove incorrect checks of list_first_entry result
Andrzej Hajda [Thu, 3 Jul 2014 13:10:31 +0000 (15:10 +0200)]
drm/exynos/ipp: remove incorrect checks of list_first_entry result

list_first_entry does not return NULL on empty list so this check
does not make sense. Moreover there is already code which prevents calling
list_first_entry on empty lists.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove temporary variable
Andrzej Hajda [Thu, 3 Jul 2014 13:10:30 +0000 (15:10 +0200)]
drm/exynos/ipp: remove temporary variable

There is no reason to allocate intermediate variable.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: correct address type
Andrzej Hajda [Thu, 3 Jul 2014 13:10:29 +0000 (15:10 +0200)]
drm/exynos/ipp: correct address type

exynos_drm_gem_get_dma_addr returns dma_addr_t, type casting to void* and
back is not necessary.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove struct exynos_drm_ipp_private
Andrzej Hajda [Thu, 3 Jul 2014 13:10:28 +0000 (15:10 +0200)]
drm/exynos/ipp: remove struct exynos_drm_ipp_private

struct exynos_drm_ipp_private contains only one pointer so all occurrences
of the struct can be replaced by the pointer itself.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove unused field from exynos_drm_ipp_private
Andrzej Hajda [Thu, 3 Jul 2014 13:10:27 +0000 (15:10 +0200)]
drm/exynos/ipp: remove unused field from exynos_drm_ipp_private

The patch removes unused event_list field from struct exynos_drm_ipp_private.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos/ipp: remove type casting
Andrzej Hajda [Thu, 3 Jul 2014 13:10:26 +0000 (15:10 +0200)]
drm/exynos/ipp: remove type casting

The patch replaces type casting with proper pointer.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: g2d: add exynos4212 as a compatible device.
Alban Browaeys [Sat, 19 Jul 2014 20:53:03 +0000 (22:53 +0200)]
drm/exynos: g2d: add exynos4212 as a compatible device.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: exynos5420: add dsi node
YoungJun Cho [Thu, 17 Jul 2014 09:01:29 +0000 (18:01 +0900)]
ARM: dts: exynos5420: add dsi node

This patch adds common part of dsi node.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: exynos5420: add mipi-phy node
YoungJun Cho [Thu, 17 Jul 2014 09:01:28 +0000 (18:01 +0900)]
ARM: dts: exynos5420: add mipi-phy node

This patch adds mipi-phy node for MIPI DSI device.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: exynos5: add system register property
YoungJun Cho [Thu, 17 Jul 2014 09:01:27 +0000 (18:01 +0900)]
ARM: dts: exynos5: add system register property

This patch adds sysreg property to fimd device node
which is required to use I80 interface.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: exynos4: add system register property
YoungJun Cho [Thu, 17 Jul 2014 09:01:26 +0000 (18:01 +0900)]
ARM: dts: exynos4: add system register property

This patch adds sysreg property to fimd device node
which is required to use I80 interface.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: dsi: add driver data to support Exynos5410/5420/5440 SoCs
YoungJun Cho [Thu, 17 Jul 2014 09:01:23 +0000 (18:01 +0900)]
drm/exynos: dsi: add driver data to support Exynos5410/5420/5440 SoCs

The offset of register DSIM_PLLTMR_REG in Exynos5410 / 5420 / 5440
SoCs is different from the one in Exynos4 SoCs.

In case of Exynos5410 / 5420 / 5440 SoCs, there is no frequency
band bit in DSIM_PLLCTRL_REG, and it uses DSIM_PHYCTRL_REG and
DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: exynos_dsim: add exynos5410 compatible to DT bindings
YoungJun Cho [Thu, 17 Jul 2014 09:01:22 +0000 (18:01 +0900)]
ARM: dts: exynos_dsim: add exynos5410 compatible to DT bindings

This patch adds relevant to exynos5410 compatible
for exynos5410 / 5420 / 5440 SoCs support.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: fimd: support LCD I80 interface
YoungJun Cho [Thu, 17 Jul 2014 09:01:21 +0000 (18:01 +0900)]
drm/exynos: fimd: support LCD I80 interface

To support MIPI command mode based I80 interface panel,
FIMD should do followings:
- Sets LCD I80 interface timings configuration.
- Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration.
- Sets LCD block configuration for I80 interface.
- Sets ideal(pixel) clock is 2 times faster than the original one
  to generate frame done IRQ prior to the next TE signal.
- Implements trigger feature that transfers image data if there is page
  flip request, and implements TE handler to call trigger function.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: dsi: add TE interrupt handler to support LCD I80 interface
YoungJun Cho [Tue, 22 Jul 2014 10:49:44 +0000 (19:49 +0900)]
drm/exynos: dsi: add TE interrupt handler to support LCD I80 interface

This is a temporary solution and should be made by more
generic way.

To support LCD I80 interface, the DSI host should register
TE interrupt handler from the TE GPIO of attached panel.
So the panel generates a tearing effect synchronization signal
then the DSI host calls the CRTC device manager to trigger
to transfer video image.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: add TE handler to support LCD I80 interface
YoungJun Cho [Thu, 17 Jul 2014 09:01:19 +0000 (18:01 +0900)]
drm/exynos: add TE handler to support LCD I80 interface

To support LCD I80 interface, the panel should generate
Tearing Effect synchronization signal between MCU and FB
to display video images.
And the display controller should trigger to transfer
video image at this signal.
So the panel receives the TE IRQ, then calls these handler
chains to notify it to the display controller.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoARM: dts: samsung-fimd: add LCD I80 interface specific properties
YoungJun Cho [Thu, 17 Jul 2014 09:01:18 +0000 (18:01 +0900)]
ARM: dts: samsung-fimd: add LCD I80 interface specific properties

In case of using MIPI DSI based I80 interface panel,
the relevant registers should be set.
So this patch adds relevant DT bindings.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: use wait_event_timeout() for safety usage
YoungJun Cho [Thu, 17 Jul 2014 09:01:17 +0000 (18:01 +0900)]
drm/exynos: use wait_event_timeout() for safety usage

There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip completion
infinitely.
And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip()
when exynos_drm_crtc_mode_set_commit() is failed.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: dsi: move the EoT packets configuration point
YoungJun Cho [Thu, 17 Jul 2014 09:01:16 +0000 (18:01 +0900)]
drm/exynos: dsi: move the EoT packets configuration point

This configuration could be used in MIPI DSI command mode also.
And adds user manual description for display configuration.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: hdmi: enable exynos 4210 and 4x12 soc support
Marek Szyprowski [Tue, 1 Jul 2014 08:10:07 +0000 (10:10 +0200)]
drm/exynos: hdmi: enable exynos 4210 and 4x12 soc support

Configuration sets for Exynos 4210 and 4x12 SoC were already defined in
Exynos HDMI and Mixed drivers, but they lacked proper linking to device
tree 'compatible' values. This patch fixes this issue adding support for
following compatible values: samsung,exynos4210-mixer,
samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects
access to sclk_mixer clock, which is available only on Exynos 4210.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: hdmi: make 'hdmi-en' regulator optional and keep it enabled
Marek Szyprowski [Tue, 1 Jul 2014 08:10:06 +0000 (10:10 +0200)]
drm/exynos: hdmi: make 'hdmi-en' regulator optional and keep it enabled

HDMI_EN regulator is additional regulator for providing voltage source
for DCC lines available on HDMI connector. When there is no power
provided for DDC epprom, some TV-sets do not pulls up HPD (hot plug
detect) line, what causes HDMI block to stay turned off. This patch
enables HDMI_EN regulator (if available) on driver probe and keep it
enabled all the time to let TV-set correctly signal HPD event.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: dp: Use correct module license
Jingoo Han [Tue, 3 Jun 2014 12:46:11 +0000 (21:46 +0900)]
drm/exynos: dp: Use correct module license

According to the header comment in the source file, the driver is
licensed under GPL v2, so update MODULE_LICENSE() to match that.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: Remove unused variable in exynos_drm_gem.c
Sachin Kamat [Wed, 2 Jul 2014 04:03:08 +0000 (09:33 +0530)]
drm/exynos: Remove unused variable in exynos_drm_gem.c

'exynos_gem_obj' is not used in the function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: Remove unused variable from exynos_hdmi.c
Sachin Kamat [Wed, 2 Jul 2014 04:03:07 +0000 (09:33 +0530)]
drm/exynos: Remove unused variable from exynos_hdmi.c

'frame_size_code' is not used in the function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agodrm/exynos: Fix NULL pointer exception when suspending without components
Krzysztof Kozlowski [Mon, 30 Jun 2014 13:25:44 +0000 (15:25 +0200)]
drm/exynos: Fix NULL pointer exception when suspending without components

Fix a NULL pointer exception when main exynos drm driver was probed
successfully but no components were added (e.g. by incomplete DTS). In
such case the exynos_drm_load() is never called and drvdata is NULL.

The NULL pointer exception may theoretically also happen as a effect of race between
adding components and main driver: if suspend of the driver happens
before adding components.

Trace:
[    1.190295] [drm] Initialized drm 1.1.0 20060810
[    1.195209] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
(...)
[   24.001743] PM: Syncing filesystems ... done.
[   24.002177] Freezing user space processes ... (elapsed 0.000 seconds) done.
[   24.007403] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   24.032559] Unable to handle kernel NULL pointer dereference at virtual address 00000134
[   24.035007] pgd = dedd8000
[   24.037734] [00000134] *pgd=5ee13831, *pte=00000000, *ppte=00000000
[   24.043953] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[   24.049329] Modules linked in:
[   24.052371] CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-rc3-00035-geba20bbdde04-dirty #51
[   24.060354] task: df478000 ti: df480000 task.ti: df480000
[   24.065743] PC is at mutex_lock+0x10/0x50
[   24.069733] LR is at drm_modeset_lock_all+0x30/0xbc
[   24.074590] pc : [<c048516c>]    lr : [<c02a14b4>]    psr: a0000013
[   24.074590] sp : df481db8  ip : 00000000  fp : c05e524c
[   24.086045] r10: 00000002  r9 : c02c1fe4  r8 : deca5e44
[   24.091253] r7 : 00000000  r6 : 00000000  r5 : 0000014c  r4 : 00000134
[   24.097763] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000134
[   24.104275] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   24.111391] Control: 10c53c7d  Table: 5edd806a  DAC: 00000015
[   24.117120] Process sh (pid: 1, stack limit = 0xdf480240)
[   24.122502] Stack: (0xdf481db8 to 0xdf482000)
[   24.126843] 1da0:                                                       dee01d80 c02a14b4
[   24.135004] 1dc0: 00000000 00000000 c07aff98 c02aec7c 00000002 00000000 00000000 c07aff98
[   24.143164] 1de0: deca5e10 c02aecf4 c02aecd4 c02c2010 00000000 c02c9470 00000000 00000000
[   24.151322] 1e00: 00000000 00000000 deca5e10 deca5e10 00000000 c07aff98 00000002 deca5e44
[   24.159482] 1e20: c06d8f78 c06fb800 deca5e78 c02ca660 df7baf00 007b0aa0 deca5e10 c06fb7c8
[   24.167641] 1e40: c07aff98 00000000 00000002 c02cbe18 9757aec5 00000005 9757aec5 00000005
[   24.175801] 1e60: ded1d380 00000003 00000003 c05c74d8 ded1d380 c07209d4 c05c7514 c07105d8
[   24.183960] 1e80: 01e2a738 c0068a74 00000000 c05c7514 ded1d380 c071c6e0 00000004 c07105d8
[   24.192119] 1ea0: 01e2a738 c047f1e0 c0600cc0 df481ec4 00000003 00000000 00000003 c05c74d8
[   24.200278] 1ec0: ded1d380 c071c6e0 c05c7514 c07105d8 01e2a738 c0069444 c06d905c 00000003
[   24.208438] 1ee0: 00000003 ded1d380 c06d9064 00000004 c05c3fc0 c0067d4c df535ab0 ded1d380
[   24.216596] 1f00: df481f80 ded1d380 00000004 ded1d1cc ded1d1c0 c0221724 00000004 c016ca6c
[   24.224756] 1f20: c016ca28 00000000 00000000 c016c1d4 00000000 00000000 b6f37000 df481f80
[   24.232915] 1f40: decedd80 00000004 df480000 df480000 b6f37000 c0110920 df47839c 60000013
[   24.241074] 1f60: 00000000 00000000 decedd80 decedd80 00000004 df480000 b6f37000 c0110da8
[   24.249233] 1f80: 00000000 00000000 00000004 b6edf5d8 00000004 b6f37000 00000004 c000f2a8
[   24.257393] 1fa0: 00001000 c000f0e0 b6edf5d8 00000004 00000001 b6f37000 00000004 00000000
[   24.265551] 1fc0: b6edf5d8 00000004 b6f37000 00000004 00000004 00000001 00000000 01e2a738
[   24.273711] 1fe0: 00000000 beba0a20 b6e1f4f0 b6e7022c 60000010 00000001 ffffffff ffffffff
[   24.281885] [<c048516c>] (mutex_lock) from [<c02a14b4>] (drm_modeset_lock_all+0x30/0xbc)
[   24.289950] [<c02a14b4>] (drm_modeset_lock_all) from [<c02aec7c>] (exynos_drm_suspend+0xc/0x64)
[   24.298627] [<c02aec7c>] (exynos_drm_suspend) from [<c02aecf4>] (exynos_drm_sys_suspend+0x20/0x34)
[   24.307568] [<c02aecf4>] (exynos_drm_sys_suspend) from [<c02c2010>] (platform_pm_suspend+0x2c/0x54)
[   24.316597] [<c02c2010>] (platform_pm_suspend) from [<c02c9470>] (dpm_run_callback+0x48/0x170)
[   24.325188] [<c02c9470>] (dpm_run_callback) from [<c02ca660>] (__device_suspend+0x128/0x39c)
[   24.333606] [<c02ca660>] (__device_suspend) from [<c02cbe18>] (dpm_suspend+0x5c/0x314)
[   24.341506] [<c02cbe18>] (dpm_suspend) from [<c0068a74>] (suspend_devices_and_enter+0x8c/0x598)
[   24.350185] [<c0068a74>] (suspend_devices_and_enter) from [<c0069444>] (pm_suspend+0x4c4/0x5d0)
[   24.358862] [<c0069444>] (pm_suspend) from [<c0067d4c>] (state_store+0x70/0xd4)
[   24.366156] [<c0067d4c>] (state_store) from [<c0221724>] (kobj_attr_store+0x14/0x20)
[   24.373885] [<c0221724>] (kobj_attr_store) from [<c016ca6c>] (sysfs_kf_write+0x44/0x48)
[   24.381867] [<c016ca6c>] (sysfs_kf_write) from [<c016c1d4>] (kernfs_fop_write+0xc0/0x17c)
[   24.390027] [<c016c1d4>] (kernfs_fop_write) from [<c0110920>] (vfs_write+0xa0/0x1c4)
[   24.397750] [<c0110920>] (vfs_write) from [<c0110da8>] (SyS_write+0x40/0x8c)
[   24.404782] [<c0110da8>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c)
[   24.412332] Code: e92d4010 e1a04000 f57ff05b f590f000 (e1903f9f)
[   24.418448] ---[ end trace cfa06690eabe8dd5 ]---
[   24.423032] Kernel panic - not syncing: Fatal exception
[   24.428220] CPU1: stopping
[   24.430905] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D       3.16.0-rc3-00035-geba20bbdde04-dirty #51
[   24.440549] [<c0016440>] (unwind_backtrace) from [<c001294c>] (show_stack+0x10/0x14)
[   24.448269] [<c001294c>] (show_stack) from [<c04811e8>] (dump_stack+0x80/0xcc)
[   24.455472] [<c04811e8>] (dump_stack) from [<c001495c>] (handle_IPI+0x130/0x15c)
[   24.462850] [<c001495c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68)
[   24.470400] [<c000862c>] (gic_handle_irq) from [<c0013440>] (__irq_svc+0x40/0x70)
[   24.477860] Exception stack(0xdf4bdf88 to 0xdf4bdfd0)
[   24.482898] df80:                   ffffffed 00000000 00000000 00000000 df4bc000 c06d042c
[   24.491058] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0
[   24.499214] dfc0: c0010324 c0010328 60000013 ffffffff
[   24.504254] [<c0013440>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30)
[   24.511634] [<c0010328>] (arch_cpu_idle) from [<c005f110>] (cpu_startup_entry+0x2c4/0x3f0)
[   24.519878] [<c005f110>] (cpu_startup_entry) from [<400086c4>] (0x400086c4)
[   24.526821] ---[ end Kernel panic - not syncing: Fatal exception

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
6 years agoMerge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Linus Torvalds [Sat, 2 Aug 2014 17:57:39 +0000 (10:57 -0700)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A few fixes for ARM.  Some of these are correctness issues:
   - TLBs must be flushed after the old mappings are removed by the DMA
     mapping code, but before the new mappings are established.
   - An off-by-one entry error in the Keystone LPAE setup code.

  Fixes include:
   - ensuring that the identity mapping for LPAE does not remove the
     kernel image from the identity map.
   - preventing userspace from trapping into kgdb.
   - fixing a preemption issue in the Intel iwmmxt code.
   - fixing a build error with nommu.

  Other changes include:
   - Adding a note about which areas of memory are expected to be
     accessible while the identity mapping tables are in place"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
  ARM: idmap: add identity mapping usage note
  ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
  ARM: fix alignment of keystone page table fixup
  ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
  ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable()
  ARM: DMA: ensure that old section mappings are flushed from the TLB

6 years agoARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
Omar Sandoval [Fri, 1 Aug 2014 17:14:06 +0000 (18:14 +0100)]
ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction

The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn)
should only be entered when a kgdb break instruction is executed
from the kernel. Otherwise, if kgdb is enabled, a userspace program
can cause the kernel to drop into the debugger by executing either
KGDB_BREAKINST or KGDB_COMPILED_BREAK.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
6 years agoARM: idmap: add identity mapping usage note
Russell King [Tue, 29 Jul 2014 11:18:34 +0000 (12:18 +0100)]
ARM: idmap: add identity mapping usage note

Add a note about the usage of the identity mapping; we do not support
accesses outside of the identity map region and kernel image while a
CPU is using the identity map.  This is because the identity mapping
may overwrite vmalloc space, IO mappings, the vectors pages, etc.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
6 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 2 Aug 2014 01:01:41 +0000 (18:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
 "This contains a couple of fixes - one is the aio fix from Christoph,
  the other a fallocate() one from Eric"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix check for fallocate on active swapfile
  direct-io: fix AIO regression

6 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 2 Aug 2014 00:37:01 +0000 (17:37 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Peter Anvin:
 "A single fix to not invoke the espfix code on Xen PV, as it turns out
  to oops the guest when invoked after all.  This patch leaves some
  amount of dead code, in particular unnecessary initialization of the
  espfix stacks when they won't be used, but in the interest of keeping
  the patch minimal that cleanup can wait for the next cycle"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/entry/xen: Do not invoke espfix64 on Xen

6 years agoMerge tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 2 Aug 2014 00:16:05 +0000 (17:16 -0700)]
Merge tag 'staging-3.16-rc8' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver bugfixes from Greg KH:
 "Here are some tiny staging driver bugfixes that I've had in my tree
  for the past week that resolve some reported issues.  Nothing major at
  all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Fix disassociated messages every 10 seconds
  staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
  staging: rtl8723au: rtw_resume(): release semaphore before exit on error
  iio:bma180: Missing check for frequency fractional part
  iio:bma180: Fix scale factors to report correct acceleration units
  iio: buffer: Fix demux table creation

6 years agoagp: remove read/write stubs
Mathias Krause [Sun, 15 Jun 2014 21:02:45 +0000 (23:02 +0200)]
agp: remove read/write stubs

The VFS layer handles those in the very same way, if unset. No need for
additional stubs.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm: drop i386 verification
David Herrmann [Wed, 23 Jul 2014 15:26:40 +0000 (17:26 +0200)]
drm: drop i386 verification

Linux doesn't run on i386, anymore. See:

    commit d55c5a93db2d5fa95f233ab153f594365d95b777
    Author: H. Peter Anvin <hpa@linux.intel.com>
    Date:   Wed Nov 28 11:50:24 2012 -0800

        x86, 386 removal: Remove CONFIG_CMPXCHG

        All 486+ CPUs support CMPXCHG, so remove the fallback 386 support
        code.

Furthermore, as the commit-message states, all 486+ CPUs support the
CMPXCHG instruction and thus even legacy DRM can run fine.

Drop the now superfluous "x86 == 3" check.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm: drop unused "struct drm_queue"
David Herrmann [Wed, 23 Jul 2014 15:26:37 +0000 (17:26 +0200)]
drm: drop unused "struct drm_queue"

This object is unused, drop it.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agodrm: remove unused "struct drm_freelist"
David Herrmann [Wed, 23 Jul 2014 15:26:36 +0000 (17:26 +0200)]
drm: remove unused "struct drm_freelist"

This object is not used except for static fields in drm_bufs *cough*.
Inline the watermark fields and drop the unused structure definition.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agoMerge tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Fri, 1 Aug 2014 19:50:05 +0000 (12:50 -0700)]
Merge tag 'dm-3.16-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix dm bufio shrinker to properly zero-fill all fields.

  Fix race in dm cache that caused improper reporting of the number of
  dirty blocks in the cache"

* tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix race affecting dirty block count
  dm bufio: fully initialize shrinker

6 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Fri, 1 Aug 2014 19:49:02 +0000 (12:49 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM straggler SoC fix from Olof Johansson:
 "A DT bugfix for Nomadik that had an ambigouos double-inversion of a
  gpio line, and one MAINTAINER URL update that might as well go in now.

  We could hold off until the merge window, but then we'll just have to
  mark the DT fix for stable and it just seems like in total causing
  more work"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update Tegra Git URL
  ARM: nomadik: fix up double inversion in DT

6 years agodm cache: fix race affecting dirty block count
Anssi Hannula [Fri, 1 Aug 2014 15:55:47 +0000 (11:55 -0400)]
dm cache: fix race affecting dirty block count

nr_dirty is updated without locking, causing it to drift so that it is
non-zero (either a small positive integer, or a very large one when an
underflow occurs) even when there are no actual dirty blocks.  This was
due to a race between the workqueue and map function accessing nr_dirty
in parallel without proper protection.

People were seeing under runs due to a race on increment/decrement of
nr_dirty, see: https://lkml.org/lkml/2014/6/3/648

Fix this by using an atomic_t for nr_dirty.

Reported-by: roma1390@gmail.com
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
6 years agodrm/i2c: tda998x: add component support
Russell King [Fri, 7 Feb 2014 19:49:44 +0000 (19:49 +0000)]
drm/i2c: tda998x: add component support

Add component helper support to the tda998x driver.  This permits the
TDA998x to be declared as a separate device in device tree, and bound
at the appropriate moment with a co-operating card driver.

The existing slave_encoder interfaces are kept while there are existing
users of it in order to prevent regressions.

Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
6 years agodrm/i2c: tda998x: allow re-use of tda998x support code
Russell King [Fri, 7 Feb 2014 19:17:21 +0000 (19:17 +0000)]
drm/i2c: tda998x: allow re-use of tda998x support code

Re-jig the TDA998x code so that we separate the functionality from the
drm slave encoder implementation.  In several places, this is pretty
clearly the correct thing to do, because we can avoid repetitively
having to convert from the drm_encoder to the TDA998x private
structure, particularly with the driver internal functions.

The main motivation behind this change is to allow the code to be
re-used with a standard drm_encoder and drm_connector implementation
based on the component helpers, rather than the slave_encoder system.
The addition of this will be in the following patch.

We keep the slave_encoder interface as there are existing users of
this; we need to give them time to convert and test.

Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
6 years agodm bufio: fully initialize shrinker
Greg Thelen [Thu, 31 Jul 2014 16:07:19 +0000 (09:07 -0700)]
dm bufio: fully initialize shrinker

1d3d4437eae1 ("vmscan: per-node deferred work") added a flags field to
struct shrinker assuming that all shrinkers were zero filled.  The dm
bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data
in flags.  So far the only defined flags bit is SHRINKER_NUMA_AWARE.
But there are proposed patches which add other bits to shrinker.flags
(e.g. memcg awareness).

Rather than simply initializing the shrinker, this patch uses kzalloc()
when allocating the dm_bufio_client to ensure that the embedded shrinker
and any other similar structures are zeroed.

This fixes theoretical over aggressive shrinking of dm bufio objects.
If the uninitialized dm_bufio_client.shrinker.flags contains
SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for
each numa node rather than just once.  This has been broken since 3.12.

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.12+
6 years agotimer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
Jan Kara [Fri, 1 Aug 2014 10:20:02 +0000 (12:20 +0200)]
timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks

clockevents_increase_min_delta() calls printk() from under
hrtimer_bases.lock. That causes lock inversion on scheduler locks because
printk() can call into the scheduler. Lockdep puts it as:

======================================================
[ INFO: possible circular locking dependency detected ]
3.15.0-rc8-06195-g939f04b #2 Not tainted
-------------------------------------------------------
trinity-main/74 is trying to acquire lock:
 (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c

but task is already holding lock:
 (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #5 (hrtimer_bases.lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197
       [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85
       [<81080792>] task_clock_event_start+0x3a/0x3f
       [<810807a4>] task_clock_event_add+0xd/0x14
       [<8108259a>] event_sched_in+0xb6/0x17a
       [<810826a2>] group_sched_in+0x44/0x122
       [<81082885>] ctx_sched_in.isra.67+0x105/0x11f
       [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b
       [<81082bf6>] __perf_install_in_context+0x8b/0xa3
       [<8107eb8e>] remote_function+0x12/0x2a
       [<8105f5af>] smp_call_function_single+0x2d/0x53
       [<8107e17d>] task_function_call+0x30/0x36
       [<8107fb82>] perf_install_in_context+0x87/0xbb
       [<810852c9>] SYSC_perf_event_open+0x5c6/0x701
       [<810856f9>] SyS_perf_event_open+0x17/0x19
       [<8142f8ee>] syscall_call+0x7/0xb

-> #4 (&ctx->lock){......}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

-> #3 (&rq->lock){-.-.-.}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81040873>] __task_rq_lock+0x33/0x3a
       [<8104184c>] wake_up_new_task+0x25/0xc2
       [<8102474b>] do_fork+0x15c/0x2a0
       [<810248a9>] kernel_thread+0x1a/0x1f
       [<814232a2>] rest_init+0x1a/0x10e
       [<817af949>] start_kernel+0x303/0x308
       [<817af2ab>] i386_start_kernel+0x79/0x7d

-> #2 (&p->pi_lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<810413dd>] try_to_wake_up+0x1d/0xd6
       [<810414cd>] default_wake_function+0xb/0xd
       [<810461f3>] __wake_up_common+0x39/0x59
       [<81046346>] __wake_up+0x29/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #1 (&tty->write_wait){-.....}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<81046332>] __wake_up+0x15/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #0 (&port_lock_key){-.....}:
       [<8104a62d>] __lock_acquire+0x9ea/0xc6d
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<811c60be>] serial8250_console_write+0x8c/0x10c
       [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
       [<8104f5d5>] console_unlock+0x1d7/0x398
       [<8104fb70>] vprintk_emit+0x3da/0x3e4
       [<81425f76>] printk+0x17/0x19
       [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
       [<8105c548>] clockevents_program_event+0xe7/0xf3
       [<8105cc1c>] tick_program_event+0x1e/0x23
       [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
       [<8103c49e>] __remove_hrtimer+0x5b/0x79
       [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
       [<8103cb4b>] hrtimer_cancel+0xd/0x18
       [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
       [<81080705>] task_clock_event_stop+0x20/0x64
       [<81080756>] task_clock_event_del+0xd/0xf
       [<81081350>] event_sched_out+0xab/0x11e
       [<810813e0>] group_sched_out+0x1d/0x66
       [<81081682>] ctx_sched_out+0xaf/0xbf
       [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

other info that might help us debug this:

Chain exists of:
  &port_lock_key --> &ctx->lock --> hrtimer_bases.lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hrtimer_bases.lock);
                               lock(&ctx->lock);
                               lock(hrtimer_bases.lock);
  lock(&port_lock_key);

 *** DEADLOCK ***

4 locks held by trinity-main/74:
 #0:  (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb
 #1:  (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
 #2:  (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66
 #3:  (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4

stack backtrace:
CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04b #2
 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570
 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0
 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003
Call Trace:
 [<81426f69>] dump_stack+0x16/0x18
 [<81425a99>] print_circular_bug+0x18f/0x19c
 [<8104a62d>] __lock_acquire+0x9ea/0xc6d
 [<8104a942>] lock_acquire+0x92/0x101
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c60be>] serial8250_console_write+0x8c/0x10c
 [<8104af87>] ? lock_release+0x191/0x223
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
 [<8104f5d5>] console_unlock+0x1d7/0x398
 [<8104fb70>] vprintk_emit+0x3da/0x3e4
 [<81425f76>] printk+0x17/0x19
 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
 [<8105cc1c>] tick_program_event+0x1e/0x23
 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
 [<8103c49e>] __remove_hrtimer+0x5b/0x79
 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
 [<8103cb4b>] hrtimer_cancel+0xd/0x18
 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
 [<81080705>] task_clock_event_stop+0x20/0x64
 [<81080756>] task_clock_event_del+0xd/0xf
 [<81081350>] event_sched_out+0xab/0x11e
 [<810813e0>] group_sched_out+0x1d/0x66
 [<81081682>] ctx_sched_out+0xaf/0xbf
 [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
 [<8104416d>] ? __dequeue_entity+0x23/0x27
 [<81044505>] ? pick_next_task_fair+0xb1/0x120
 [<8142cacc>] __schedule+0x4c6/0x4cb
 [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108
 [<810475b0>] ? trace_hardirqs_off+0xb/0xd
 [<81056346>] ? rcu_irq_exit+0x64/0x77

Fix the problem by using printk_deferred() which does not call into the
scheduler.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
6 years agovfs: fix check for fallocate on active swapfile
Eric Biggers [Wed, 25 Jun 2014 04:45:08 +0000 (23:45 -0500)]
vfs: fix check for fallocate on active swapfile

Fix the broken check for calling sys_fallocate() on an active swapfile,
introduced by commit 0790b31b69374ddadefe ("fs: disallow all fallocate
operation on active swapfile").

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
6 years agodirect-io: fix AIO regression
Christoph Hellwig [Wed, 30 Jul 2014 11:18:48 +0000 (07:18 -0400)]
direct-io: fix AIO regression

The direct-io.c rewrite to use the iov_iter infrastructure stopped updating
the size field in struct dio_submit, and thus rendered the check for
allowing asynchronous completions to always return false.  Fix this by
comparing it to the count of bytes in the iov_iter instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
6 years agoMerge tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Thu, 31 Jul 2014 23:42:10 +0000 (16:42 -0700)]
Merge tag 'pm+acpi-3.16-rc8' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "One commit that fixes a problem causing PNP devices to be associated
  with wrong ACPI device objects sometimes during device enumeration due
  to an incorrect check in a matching function.

  That problem was uncovered by the ACPI device enumeration rework in
  3.14"

* tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: Fix acpi_pnp_match()

6 years agoMerge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Linus Torvalds [Thu, 31 Jul 2014 17:02:15 +0000 (10:02 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux

Pull clock driver fix from Mike Turquette:
 "A single patch to re-enable audio which is broken on all DRA7
  SoC-based platforms.  Missed this one from the last set of fixes"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: ti: clk-7xx: Correct ABE DPLL configuration