sfrench/cifs-2.6.git
19 months agovideo/hdmi: Reject illegal picture aspect ratios
Ville Syrjälä [Tue, 8 May 2018 11:09:40 +0000 (16:39 +0530)]
video/hdmi: Reject illegal picture aspect ratios

AVI infoframe can only carry none, 4:3, or 16:9 picture aspect
ratios. Return an error if the user asked for something different.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Lin, Jia" <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-6-git-send-email-ankit.k.nautiyal@intel.com
19 months agodrm/edid: Don't send bogus aspect ratios in AVI infoframes
Ville Syrjälä [Tue, 8 May 2018 11:09:39 +0000 (16:39 +0530)]
drm/edid: Don't send bogus aspect ratios in AVI infoframes

If the user mode would specify an aspect ratio other than 4:3 or 16:9
we now silently ignore it. Maybe a better apporoach is to return an
error? Let's try that.

Also we must be careful that we don't try to send illegal picture
aspect in the infoframe as it's only capable of signalling none,
4:3, and 16:9. Currently we're sending these bogus infoframes
whenever the cea mode specifies some other aspect ratio.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-5-git-send-email-ankit.k.nautiyal@intel.com
19 months agodrm/edid: Fix cea mode aspect ratio handling
Ville Syrjälä [Tue, 8 May 2018 11:09:38 +0000 (16:39 +0530)]
drm/edid: Fix cea mode aspect ratio handling

commit 6dffd431e229 ("drm: Add aspect ratio parsing in DRM layer")
cause us to not send out any VICs in the AVI infoframes. That commit
was since reverted, but if and when we add aspect ratio handing back
we need to be more careful.

Let's handle this by considering the aspect ratio as a requirement
for cea mode matching only if the passed in mode actually has a
non-zero aspect ratio field. This will keep userspace that doesn't
provide an aspect ratio working as before by matching it to the
first otherwise equal cea mode. And once userspace starts to
provide the aspect ratio it will be considerd a hard requirement
for the match.

Also change the hdmi mode matching to use drm_mode_match() for
consistency, but we don't match on aspect ratio there since the
spec doesn't list a specific aspect ratio for those modes.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Lin, Jia" <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-4-git-send-email-ankit.k.nautiyal@intel.com
19 months agodrm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
Ville Syrjälä [Tue, 8 May 2018 11:09:37 +0000 (16:39 +0530)]
drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy

Use drm_mode_equal_no_clocks_no_stereo() in
drm_match_hdmi_mode_clock_tolerance() for consistency as we
also use it in drm_match_hdmi_mode() and the cea mode matching
functions.

This doesn't actually change anything since the input mode
comes from detailed timings and we match it against
edid_4k_modes[] which. So none of those modes can have stereo
flags set.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-3-git-send-email-ankit.k.nautiyal@intel.com
19 months agodrm/modes: Introduce drm_mode_match()
Ville Syrjälä [Tue, 8 May 2018 11:09:36 +0000 (16:39 +0530)]
drm/modes: Introduce drm_mode_match()

Make mode matching less confusing by allowing the caller to specify
which parts of the modes should match via some flags.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-2-git-send-email-ankit.k.nautiyal@intel.com
19 months agodrm: panel-orientation-quirks: Convert to use match_string() helper
Andy Shevchenko [Thu, 3 May 2018 18:41:19 +0000 (21:41 +0300)]
drm: panel-orientation-quirks: Convert to use match_string() helper

The new helper returns index of the matching string in an array.
We are going to use it here.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503184119.22355-1-andriy.shevchenko@linux.intel.com
19 months agodrm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4
Matt Atwood [Fri, 4 May 2018 22:18:00 +0000 (15:18 -0700)]
drm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4

DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.

With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.

To avoid breaking panels that are not spec compiant we now warn on
invalid values.

V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-2-matthew.s.atwood@intel.com
19 months agodrm/dp: Add DP_DPCD_REV_XX to drm_dp_helper
Matt Atwood [Fri, 4 May 2018 22:17:59 +0000 (15:17 -0700)]
drm/dp: Add DP_DPCD_REV_XX to drm_dp_helper

As more differentation occurs between DP spec. Its useful to have these
as macros in a drm_dp_helper.

v2: DPCD_REV_XX to DP_DPCD_REV_XX

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-1-matthew.s.atwood@intel.com
19 months agodrm/xen-front: Fix loop timeout
Dan Carpenter [Tue, 8 May 2018 09:28:29 +0000 (12:28 +0300)]
drm/xen-front: Fix loop timeout

If the loop times out then we want to exit with "to" set to zero, but in
the current code it's set to -1.

Fixes: c575b7eeb89f ("drm/xen-front: Add support for Xen PV display frontend")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508092829.GC661@mwanda
19 months agodrm/xen-front: fix xen_drm_front_shbuf_alloc() error handling
Dan Carpenter [Tue, 8 May 2018 09:27:39 +0000 (12:27 +0300)]
drm/xen-front: fix xen_drm_front_shbuf_alloc() error handling

The xen_drm_front_shbuf_alloc() function was returning a mix of error
pointers and NULL and the the caller wasn't checking correctly.  I've
changed it to always return error pointer consistently.

Fixes: c575b7eeb89f ("drm/xen-front: Add support for Xen PV display frontend")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508092739.GB661@mwanda
19 months agodrm/xen-front: checking for NULL instead of IS_ERR
Dan Carpenter [Tue, 8 May 2018 09:26:50 +0000 (12:26 +0300)]
drm/xen-front: checking for NULL instead of IS_ERR

drm_dev_alloc() returns error pointers, it never returns NULL.

Fixes: c575b7eeb89f ("drm/xen-front: Add support for Xen PV display frontend")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508092650.GA661@mwanda
19 months agodma-buf: Remove unneeded stubs around sync_debug interfaces
Ezequiel Garcia [Fri, 4 May 2018 18:00:37 +0000 (15:00 -0300)]
dma-buf: Remove unneeded stubs around sync_debug interfaces

The sync_debug.h header is internal, and only used by
sw_sync.c. Therefore, SW_SYNC is always defined and there
is no need for the stubs. Remove them and make the code
simpler.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504180037.10661-1-ezequiel@collabora.com
19 months agodrm/selftests: Add drm helper selftest
Maarten Lankhorst [Thu, 3 May 2018 11:22:17 +0000 (13:22 +0200)]
drm/selftests: Add drm helper selftest

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-6-maarten.lankhorst@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
19 months agodrm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTEST
Maarten Lankhorst [Thu, 3 May 2018 11:22:16 +0000 (13:22 +0200)]
drm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTEST

We want to add more DRM selftests, and there's not much point in
having a Kconfig option for every single one of them, so make
a generic one.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-5-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix i915/Kconfig.debug (ickle)]
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
19 months agodrm/i915: Do not adjust scale when out of bounds, v2.
Maarten Lankhorst [Thu, 3 May 2018 11:22:15 +0000 (13:22 +0200)]
drm/i915: Do not adjust scale when out of bounds, v2.

With the previous patch drm_atomic_helper_check_plane_state correctly
calculates clipping and the xf86-video-intel ddx is fixed to fall back
to GPU correctly when SetPlane fails, we can remove the hack where
we try to pan/zoom when out of min/max scaling range. This was already
poor behavior where the screen didn't show what was requested, and now
instead we reject it outright. This simplifies check_sprite_plane a lot.

Changes since v1:
- Set crtc_h to the height correctly.
- Reject < 3x3 rectangles instead of making them invisible for <gen9.
  For gen9+ skl_update_scaler_plane will reject them.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-4-maarten.lankhorst@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
19 months agodrm/rect: Handle rounding errors in drm_rect_clip_scaled, v3.
Maarten Lankhorst [Thu, 3 May 2018 11:22:14 +0000 (13:22 +0200)]
drm/rect: Handle rounding errors in drm_rect_clip_scaled, v3.

Instead of relying on a scale which may increase rounding errors,
clip src by doing: src * (dst - clip) / dst and rounding the result
away from 1, so the new coordinates get closer to 1. We won't need
to fix up with a magic macro afterwards, because our scaling factor
will never go to the other side of 1.

Changes since v1:
- Adjust dst immediately, else drm_rect_width/height on dst gives bogus
  results.
Change since v2:
- Get rid of macros and use 64-bits math.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add Villes comment, and rename newsrc to tmp. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-3-maarten.lankhorst@linux.intel.com
19 months agodrm/rect: Round above 1 << 16 upwards to correct scale calculation functions.
Maarten Lankhorst [Thu, 3 May 2018 11:22:13 +0000 (13:22 +0200)]
drm/rect: Round above 1 << 16 upwards to correct scale calculation functions.

When calculating limits we want to be as pessimistic as possible,
so we have to explicitly say whether we want to round up or down
to accurately calculate whether we are below min_scale or above
max_scale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Fix wording in documentation. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-2-maarten.lankhorst@linux.intel.com
19 months agogpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probe
Jia-Ju Bai [Wed, 11 Apr 2018 08:33:42 +0000 (16:33 +0800)]
gpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probe

adv7511_probe() is never called in atomic context.
This function is only set as ".probe" in struct i2c_driver.

Despite never getting called from atomic context, adv7511_probe()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1523435622-4329-1-git-send-email-baijiaju1990@gmail.com
19 months agodrm/bridge: adv7511: fix spelling of driver name in Kconfig
Peter Rosin [Thu, 26 Apr 2018 21:36:44 +0000 (23:36 +0200)]
drm/bridge: adv7511: fix spelling of driver name in Kconfig

Could perhaps prevent some confusion.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426213644.29318-1-peda@axentia.se
19 months agodrm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+
Eric Anholt [Mon, 30 Apr 2018 18:10:58 +0000 (11:10 -0700)]
drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+

This driver will be used to support Mesa on the Broadcom 7268 and 7278
platforms.

V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's
complicated CL/shader validation scheme.  This massively changes the
GEM behavior, so I've forked off to a new driver.

v2: Mark SUBMIT_CL as needing DRM_AUTH.  coccinelle fixes from kbuild
    test robot. Drop personal git link from MAINTAINERS.  Don't
    double-map dma-buf imported BOs.  Add kerneldoc about needing MMU
    eviction.  Drop prime vmap/unmap stubs.  Delay mmap offset setup
    to mmap time.  Use drm_dev_init instead of _alloc.  Use
    ktime_get() for wait_bo timeouts.  Drop drm_can_sleep() usage,
    since we don't modeset.  Switch page tables back to WC (debug
    change to coherent had slipped in).  Switch
    drm_gem_object_unreference_unlocked() to
    drm_gem_object_put_unlocked().  Simplify overflow mem handling by
    not sharing overflow mem between jobs.
v3: no changes
v4: align submit_cl to 64 bits (review by airlied), check zero flags in
    other ioctls.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4)
Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change)
Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
19 months agodt-bindings: Add a new binding for Broadcom V3D 3.x and newer GPUs.
Eric Anholt [Mon, 30 Apr 2018 18:10:57 +0000 (11:10 -0700)]
dt-bindings: Add a new binding for Broadcom V3D 3.x and newer GPUs.

These OpenGL ES GPUs are present in the 7268 and 7278 set top box
chips.

v2: no changes
v3: move to gpu/, fix typo

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-2-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org>
19 months agodrm/vc4: Add a pad field to align drm_vc4_submit_cl to 64 bits.
Eric Anholt [Mon, 30 Apr 2018 23:59:27 +0000 (16:59 -0700)]
drm/vc4: Add a pad field to align drm_vc4_submit_cl to 64 bits.

I had originally asked Stefan Schake to drop the pad field from the
syncobj changes that just landed, because I couldn't come up with a
reason to align to 64 bits.

Talking with Dave Airlie about the new v3d driver's submit ioctl, we
came up with a reason: sizeof() on 64-bit platforms may align to 64
bits, in which case the userspace will be submitting the aligned size
and the final 32 bits won't be zero-padded by the kernel.  If
userspace doesn't zero-fill, then a future ABI change adding a 32-bit
field at the end could potentially cause the kernel to read undefined
data from old userspace (our userspace happens to use structure
initialization that zero-fills, but as a general rule we try not to
rely on that in the kernel).

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430235927.28712-1-eric@anholt.net
Reviewed-by: Stefan Schake <stschake@gmail.com>
19 months agodrm/pl111: Fix module probe bug
Linus Walleij [Thu, 3 May 2018 14:04:31 +0000 (16:04 +0200)]
drm/pl111: Fix module probe bug

Commit a30933c27602 ("drm/pl111: Support the Versatile Express")
Added a second module using the builtin_platform_driver() call,
which works fine as long as you do not try to build the PL111
driver as a module, because a module can only have one initcall
and cause the following build bug:

(...) multiple definition of `init_module' (...)

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: a30933c27602 ("drm/pl111: Support the Versatile Express")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503140431.5798-1-linus.walleij@linaro.org
19 months agodrm: remove all control node code
Daniel Vetter [Fri, 20 Apr 2018 06:51:59 +0000 (08:51 +0200)]
drm: remove all control node code

With the ioctl and driver prep done, we can remove everything else.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
19 months agodrm/msm: Don't setup control node debugfs files
Daniel Vetter [Thu, 3 May 2018 09:31:07 +0000 (11:31 +0200)]
drm/msm: Don't setup control node debugfs files

It's going away.

v2: Try harder to find them all.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503093107.25955-1-daniel.vetter@ffwll.ch
19 months agodrm/atomic: Handling the case when setting old crtc for plane
Satendra Singh Thakur [Thu, 3 May 2018 05:49:32 +0000 (11:19 +0530)]
drm/atomic: Handling the case when setting old crtc for plane

In the func drm_atomic_set_crtc_for_plane, with the current code,
if crtc of the plane_state and crtc passed as argument to the func
are same, entire func will executed in vein.
It will get state of crtc and clear and set the bits in plane_mask.
All these steps are not required for same old crtc.
Ideally, we should do nothing in this case, this patch handles the same,
and causes the program to return without doing anything in such scenario.

Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1525326572-25854-1-git-send-email-satendra.t@samsung.com
19 months agoRevert 190c462d5be19ba622a82f5fd0625087c870a1e6..bf3012ada1b2222e770de5c35c1bb16f73b3...
Daniel Vetter [Thu, 3 May 2018 10:31:38 +0000 (12:31 +0200)]
Revert 190c462d5be19ba622a82f5fd0625087c870a1e6..bf3012ada1b2222e770de5c35c1bb16f73b3a01d"

I shouldn't have pushed this, CI was right - I failed to remove the
BUG_ON(!ops->wait);

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
19 months agodrm/qxl: Remove unecessary dma_fence_ops
Daniel Vetter [Wed, 2 May 2018 08:23:25 +0000 (10:23 +0200)]
drm/qxl: Remove unecessary dma_fence_ops

The trivial enable_signaling implementation matches the default code.

v2: Fix up commit message to match patch better (Eric).

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180502082325.30264-1-daniel.vetter@ffwll.ch
19 months agodrm: Remove unecessary dma_fence_ops
Daniel Vetter [Fri, 27 Apr 2018 06:17:14 +0000 (08:17 +0200)]
drm: Remove unecessary dma_fence_ops

dma_fence_default_wait is the default now, same for the trivial
enable_signaling implementation.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-8-daniel.vetter@ffwll.ch
19 months agodma-fence: Make ->wait callback optional
Daniel Vetter [Fri, 27 Apr 2018 06:17:12 +0000 (08:17 +0200)]
dma-fence: Make ->wait callback optional

Almost everyone uses dma_fence_default_wait.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-6-daniel.vetter@ffwll.ch
19 months agodma-fence: Allow wait_any_timeout for all fences
Daniel Vetter [Fri, 27 Apr 2018 06:17:11 +0000 (08:17 +0200)]
dma-fence: Allow wait_any_timeout for all fences

When this was introduced in

commit a519435a96597d8cd96123246fea4ae5a6c90b02
Author: Christian König <christian.koenig@amd.com>
Date:   Tue Oct 20 16:34:16 2015 +0200

    dma-buf/fence: add fence_wait_any_timeout function v2

there was a restriction added that this only works if the dma-fence
uses the dma_fence_default_wait hook. Which works for amdgpu, which is
the only caller. Well, until you share some buffers with e.g. i915,
then you get an -EINVAL.

But there's really no reason for this, because all drivers must
support callbacks. The special ->wait hook is only as an optimization;
if the driver needs to create a worker thread for an active callback,
then it can avoid to do that if it knows that there's a process
context available already. So ->wait is just an optimization, just
using the logic in dma_fence_default_wait() should work for all
drivers.

Let's remove this restriction.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-5-daniel.vetter@ffwll.ch
19 months agodma-fence: Make ->enable_signaling optional
Daniel Vetter [Fri, 27 Apr 2018 06:17:10 +0000 (08:17 +0200)]
dma-fence: Make ->enable_signaling optional

Many drivers have a trivial implementation for ->enable_signaling.
Let's make it optional by assuming that signalling is already
available when the callback isn't present.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-4-daniel.vetter@ffwll.ch
19 months agodma-fence: remove fill_driver_data callback
Daniel Vetter [Wed, 2 May 2018 08:23:59 +0000 (10:23 +0200)]
dma-fence: remove fill_driver_data callback

Noticed while I was typing docs. Entirely unused.

v2: Remove reference in @timeline_value_str too. While at it clarify
why timeline_value_str has a fence parameter - we don't have an
explicit timeline structure unfortunately.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502082359.30345-1-daniel.vetter@ffwll.ch
19 months agodrm/vmwgfx: Drop DRM_CONTROL_ALLOW
Daniel Vetter [Fri, 20 Apr 2018 06:51:58 +0000 (08:51 +0200)]
drm/vmwgfx: Drop DRM_CONTROL_ALLOW

Control nodes are no more!

Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-3-daniel.vetter@ffwll.ch
19 months agodrm/i915: Drop DRM_CONTROL_ALLOW
Daniel Vetter [Fri, 20 Apr 2018 06:51:57 +0000 (08:51 +0200)]
drm/i915: Drop DRM_CONTROL_ALLOW

Control nodes are no more!

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-2-daniel.vetter@ffwll.ch
19 months agodrm: Drop DRM_CONTROL_ALLOW from ioctls
Daniel Vetter [Fri, 20 Apr 2018 06:51:56 +0000 (08:51 +0200)]
drm: Drop DRM_CONTROL_ALLOW from ioctls

We've disabled control nodes in

commit 8a357d10043c75e980e7fcdb60d2b913491564af
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Oct 28 10:10:50 2016 +0200

    drm: Nerf DRM_CONTROL nodes

and there was only a minor uapi break that we've paper over with

commit 6449b088dd51dd5aa6b38455888bbf538d21f2fc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Dec 9 14:56:56 2016 +0100

    drm: Add fake controlD* symlinks for backwards compat

Since then Keith has also added real control nodes with a
proper&useable uapi in the form of drm leases.

It's time to remove the control node leftovers.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-1-daniel.vetter@ffwll.ch
19 months agodrm/rect: Fix drm_rect_rotation_inv() docs
Ville Syrjälä [Thu, 26 Apr 2018 14:16:31 +0000 (17:16 +0300)]
drm/rect: Fix drm_rect_rotation_inv() docs

An overeager sed has corrupted the drm_rect_rotation_inv()
documentation. Fix it up.

Looks like it wasn't entirely correct before the sed fail
either. We were missing _rect_ from the function names, which
also explains why the sed hit these by accident.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426141631.15798-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
19 months agodrm/pl111: Enable device-specific assigned memory
Linus Walleij [Wed, 2 May 2018 13:47:19 +0000 (15:47 +0200)]
drm/pl111: Enable device-specific assigned memory

The Versatile Express has 8 MB of dedicated video RAM (VRAM)
on the motherboard, which is what we should be using for the
PL111 if available. On this platform, the memory backplane
is constructed so that only this memory will work properly
with the CLCD on the motherboard, using any other memory
area just gives random snow on the display.

The CA9 Versatile Express also has a PL111 instance on its
core tile that can address all memory, and this does not
have the restriction.

The memory is assigned to the device using the memory-region
device tree property and a "shared-dma-pool" reserved
memory pool like this:

reserved-memory {
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        vram: vram@48000000 {
                compatible = "shared-dma-pool";
                reg = <0x48000000 0x00800000>;
                no-map;
        };
};

clcd@1f000 {
        compatible = "arm,pl111", "arm,primecell";
(...)
        memory-region = <&vram>;
}·;

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-2-linus.walleij@linaro.org
19 months agodrm/pl111: Support the Versatile Express
Linus Walleij [Wed, 2 May 2018 13:47:18 +0000 (15:47 +0200)]
drm/pl111: Support the Versatile Express

The Versatile Express uses a special configuration controller
deeply embedded in the system motherboard FPGA to multiplex the
two to three (!) display controller instances out to the single
SiI9022 bridge.

Set up an extra file with the logic to probe to the FPGA mux
register on the system controller bus, then parse the device
tree to see if there is a CLCD or HDLCD instance on the core
tile (also known as the daughterboard) by looking in the
root of the device tree for compatible nodes.

- If there is a HDLCD on the core tile, and there is a driver
  for it, we exit probe and deactivate the motherboard CLCD.
  We do not touch the DVI mux in this case, to make sure we
  don't break HDLCD.

- If there is a CLCD on both the motherboard and the core tile
  (only the CA9 has this) the core tile CLCD takes precedence
  and get muxed to the DVI connector.

- Only if there is no working graphics on the core tile, the
  motherboard CLCD is probed and muxed to the DVI connector.

Core tile graphics should always take precedence as it can
address all memory and is also faster, however the motherboard
CLCD is good to have around for diagnostics and testing.

It is possible to test the motherboard CLCD by setting the
status = "disabled" property on the core tile CLCD or
HDLCD.

Scale down the Versatile Express to 16BPP so we can support a
1024x768 display despite the bus bandwidth restrictions on this
platform. (The motherboard CLCD supports slightly lower
resolution.)

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-1-linus.walleij@linaro.org
19 months agogpu: drm: sti: fix spelling mistake: "initialze" -> "initialize"
Colin Ian King [Wed, 2 May 2018 10:10:48 +0000 (11:10 +0100)]
gpu: drm: sti: fix spelling mistake: "initialze" -> "initialize"

Trivial fix to spelling mistake in DRM_ERROR error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502101048.8442-1-colin.king@canonical.com
19 months agodma-fence: Some kerneldoc polish for dma-fence.h
Daniel Vetter [Fri, 27 Apr 2018 06:17:08 +0000 (08:17 +0200)]
dma-fence: Some kerneldoc polish for dma-fence.h

- Switch to inline member docs for dma_fence_ops.
- Mild polish all around.
- hyperlink all the things!

v2: - Remove the various [in] annotations, they seem really uncommon
in kerneldoc and look funny.

v3: Linebreak the "Returns" part of the @fill_driver_data kerneldoc
(Eric).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-2-daniel.vetter@ffwll.ch
19 months agodrm/rockchip: Disable blending for win0
Kristian H. Kristensen [Wed, 18 Apr 2018 17:31:52 +0000 (10:31 -0700)]
drm/rockchip: Disable blending for win0

Blending win0 with the background color doesn't seem to work
correctly. We only get the background color, no matter the contents of
the win0 framebuffer.  However, blending pre-multiplied color with the
default opaque black default background color is a no-op, so we can
just disable blending to get the correct result.

Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418173152.93246-1-hoegsberg@chromium.org
19 months agodrm/vc4: Enable syncobj support
Stefan Schake [Tue, 24 Apr 2018 22:03:47 +0000 (00:03 +0200)]
drm/vc4: Enable syncobj support

This doesn't require any additional functionality from the driver but
is a prerequisite to userland calling the syncobj ioctls.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-4-git-send-email-stschake@gmail.com
19 months agodrm/vc4: Export fence through syncobj
Stefan Schake [Tue, 24 Apr 2018 22:03:46 +0000 (00:03 +0200)]
drm/vc4: Export fence through syncobj

Allow specifying a syncobj on render job submission where we store the
fence for the job. This gives userland flexible access to the fence.

v2: Use 0 as invalid syncobj to drop flag (Eric)
    Don't reintroduce the padding (Eric)

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-3-git-send-email-stschake@gmail.com
19 months agodrm/vc4: Syncobj import support
Stefan Schake [Tue, 24 Apr 2018 22:03:45 +0000 (00:03 +0200)]
drm/vc4: Syncobj import support

Allow userland to specify a syncobj that is waited on before a render job
starts processing.

v2: Use 0 as invalid syncobj to drop flag (Eric)
    Drop extra newline (Eric)

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-2-git-send-email-stschake@gmail.com
19 months agodrm/panel: Enable DSI transactions on the RPi panel.
Eric Anholt [Tue, 31 Oct 2017 19:32:58 +0000 (12:32 -0700)]
drm/panel: Enable DSI transactions on the RPi panel.

It turns out that I had just mistaken what type of write the register
writes were supposed to be, using DCS instead of generic long writes.

Switching to transactions instead of using the atmel as a bridge also
seems to resolve the sparkling pixels problem I've had.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-2-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
19 months agodrm/vc4: Skip ULPS latching when we're in that ULPS state already.
Eric Anholt [Tue, 31 Oct 2017 19:32:57 +0000 (12:32 -0700)]
drm/vc4: Skip ULPS latching when we're in that ULPS state already.

It seems that trying to go from unlatched to unlatched will time out
waiting for STOP, and we can just skip that.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
19 months agodrm/vc4: make function vc4_allocate_bin_bo static
Vaishali Thakkar [Wed, 25 Apr 2018 07:09:53 +0000 (12:39 +0530)]
drm/vc4: make function vc4_allocate_bin_bo static

Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?

Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425070953.17933-1-vthakkar1994@gmail.com
19 months agodrm: Make the prime vmap/vunmap hooks optional.
Eric Anholt [Tue, 24 Apr 2018 00:46:08 +0000 (17:46 -0700)]
drm: Make the prime vmap/vunmap hooks optional.

Some drivers leave these unimplemented, so don't make them have
unimplemented stubs.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424004610.4637-2-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
19 months agodrm/tinydrm/mi0283qt: Always set rotation value
Tom Callaway [Mon, 23 Apr 2018 16:16:39 +0000 (12:16 -0400)]
drm/tinydrm/mi0283qt: Always set rotation value

The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.

Signed-off-by: Tom Callaway <tcallawa@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423161639.14420-1-tcallawa@redhat.com
19 months agodrm: Don't pass the index to drm_property_add_enum()
Ville Syrjälä [Fri, 16 Mar 2018 19:04:20 +0000 (21:04 +0200)]
drm: Don't pass the index to drm_property_add_enum()

drm_property_add_enum() can calculate the index itself just fine,
so no point in having the caller pass it in.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316190420.26734-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
19 months agodrm/dp: Rename the edp_sdp_header as dp_sdp_header
Manasi Navare [Thu, 26 Apr 2018 19:27:48 +0000 (12:27 -0700)]
drm/dp: Rename the edp_sdp_header as dp_sdp_header

No functional changes in this patch.

The SDP Header is a generic header for secondary data packets for
both eDP and DP so call it dp_sdp_header. This header gets used for
different SDP types already defined.
Also header bytes 2 and 3 are secondary data packet specific header bytes.
So change the comment to indicate the same.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524770868-16869-1-git-send-email-manasi.d.navare@intel.com
19 months agodrm/stm: ltdc: fix warnings in ltdc_plane_create()
Philippe CORNU [Thu, 19 Apr 2018 13:28:04 +0000 (15:28 +0200)]
drm/stm: ltdc: fix warnings in ltdc_plane_create()

"make C=1" returns 2 warnings in ltdc_plane_create()
("Using plain integer as NULL pointer"). This patch
fixes them.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419132804.8317-1-philippe.cornu@st.com
19 months agodrm/stm: ltdc: add mode_valid()
Philippe CORNU [Tue, 17 Apr 2018 11:40:26 +0000 (13:40 +0200)]
drm/stm: ltdc: add mode_valid()

Add mode_valid() function to filter modes according to available
pll clock values and "preferred" modes. It is particularly
useful for hdmi modes that require precise pixel clocks.

Note that "preferred" modes are always accepted:
- this is important for panels because panel clock tolerances are
  bigger than hdmi ones and there is no reason to not accept them
  (the fps may vary a little but it is not a problem).
- the hdmi preferred mode will be accepted too, but userland will
  be able to use others hdmi "valid" modes if necessary.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417114026.8709-1-philippe.cornu@st.com
19 months agodrm/stm: ltdc: fix deferred endpoint management
Philippe CORNU [Tue, 17 Apr 2018 11:34:41 +0000 (13:34 +0200)]
drm/stm: ltdc: fix deferred endpoint management

When a driver related to one of the endpoints is deferred
due to probe dependencies (i2c, spi...) but the other one
is ready, ltdc probe continues and the deferred driver
will never be probed again.

The fix consists in waiting for all deferred endpoints before
continuing the ltdc probe.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113441.8214-1-philippe.cornu@st.com
19 months agoqxl: drop dummy functions
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:04 +0000 (09:19 +0200)]
qxl: drop dummy functions

These days drm core checks function pointers everywhere before calling
them.  So we can drop a bunch of dummy functions now.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
19 months agoqxl: hook monitors_config updates into crtc, not encoder.
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:03 +0000 (09:19 +0200)]
qxl: hook monitors_config updates into crtc, not encoder.

The encoder callbacks are only called in case the video mode changes.
So any layout changes without mode changes will go unnoticed.

Add qxl_crtc_update_monitors_config(), based on the old
qxl_write_monitors_config_for_encoder() function.  Hook it into the
enable, disable and flush atomic crtc callbacks.  Remove monitors_config
updates from all other places.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1544322
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-4-kraxel@redhat.com
19 months agoqxl: move qxl_send_monitors_config()
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:02 +0000 (09:19 +0200)]
qxl: move qxl_send_monitors_config()

Needed to avoid a forward declaration in a followup patch.
Pure code move, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-3-kraxel@redhat.com
19 months agoqxl: remove qxl_io_log()
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:01 +0000 (09:19 +0200)]
qxl: remove qxl_io_log()

qxl_io_log() sends messages over to the host (qemu) for logging.
Remove the function and all callers, we can just use standard
DRM_DEBUG calls (and if needed a serial console).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-2-kraxel@redhat.com
19 months agodrm/bridge/synopsys: dsi: use adjusted_mode in mode_set
Philippe CORNU [Thu, 25 Jan 2018 15:55:04 +0000 (16:55 +0100)]
drm/bridge/synopsys: dsi: use adjusted_mode in mode_set

The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
19 months agodrm/todo: Fallout from v3d review
Daniel Vetter [Wed, 25 Apr 2018 11:17:42 +0000 (13:17 +0200)]
drm/todo: Fallout from v3d review

Bunch of ideas from Eric and me on what we could do to make gem gpu
rendering drivers a notch simpler to type.

v2: Fix typo (Eric).

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425111742.5872-1-daniel.vetter@ffwll.ch
19 months agodrm/virtio: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:24 +0000 (15:15 +0200)]
drm/virtio: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131524.2510-1-luc.vanoostenryck@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
19 months agodrm/i2c: tda998x: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:21 +0000 (15:15 +0200)]
drm/i2c: tda998x: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131522.2460-1-luc.vanoostenryck@gmail.com
19 months agodrm/qxl: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:15 +0000 (15:15 +0200)]
drm/qxl: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
19 months agodrm/gma500: fix psb_intel_lvds_mode_valid()'s return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:57 +0000 (15:14 +0200)]
drm/gma500: fix psb_intel_lvds_mode_valid()'s return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.

Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
19 months agodrm/gma500: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:54 +0000 (15:14 +0200)]
drm/gma500: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131455.2011-1-luc.vanoostenryck@gmail.com
19 months agodrm/bridge: tc358767: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:52 +0000 (15:14 +0200)]
drm/bridge: tc358767: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131453.1961-1-luc.vanoostenryck@gmail.com
19 months agodrm/bochs: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:45 +0000 (15:14 +0200)]
drm/bochs: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131445.1861-1-luc.vanoostenryck@gmail.com
19 months agodrm/udl: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:17 +0000 (15:15 +0200)]
drm/udl: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131520.2409-1-luc.vanoostenryck@gmail.com
19 months agodrm/mgag200: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:06 +0000 (15:15 +0200)]
drm/mgag200: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131508.2210-1-luc.vanoostenryck@gmail.com
19 months agodrm/hisilicon: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:02 +0000 (15:15 +0200)]
drm/hisilicon: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131504.2159-1-luc.vanoostenryck@gmail.com
19 months agodrm/bridge: adv7511: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:47 +0000 (15:14 +0200)]
drm/bridge: adv7511: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
19 months agodrm/ast: fix mode_valid's return type
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:40 +0000 (15:14 +0200)]
drm/ast: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131443.1810-1-luc.vanoostenryck@gmail.com
19 months agodrm: adv7511: Add support for i2c_new_secondary_device
Kieran Bingham [Tue, 13 Feb 2018 17:48:57 +0000 (17:48 +0000)]
drm: adv7511: Add support for i2c_new_secondary_device

The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
19 months agodt-bindings: adv7511: Extend bindings to allow specifying slave map addresses
Kieran Bingham [Tue, 13 Feb 2018 17:48:54 +0000 (17:48 +0000)]
dt-bindings: adv7511: Extend bindings to allow specifying slave map addresses

The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-3-git-send-email-kbingham@kernel.org
19 months agodrm: Don't EXPORT drm_add/reset_display_info
Daniel Vetter [Tue, 24 Apr 2018 14:22:42 +0000 (16:22 +0200)]
drm: Don't EXPORT drm_add/reset_display_info

Only used within drm.ko, no need to tempt drivers.

Cc: Keith Packard <keithp@keithp.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424142242.12093-1-daniel.vetter@ffwll.ch
19 months agodrm/xen-front: use simple display pipe prepare_fb helper
Daniel Vetter [Mon, 9 Apr 2018 08:51:34 +0000 (10:51 +0200)]
drm/xen-front: use simple display pipe prepare_fb helper

I missed this one because on an older tree.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
19 months agodrm/atomic: better doc for implicit vs explicit fencing
Daniel Vetter [Thu, 5 Apr 2018 15:44:46 +0000 (17:44 +0200)]
drm/atomic: better doc for implicit vs explicit fencing

Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.

I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.

v2: Comments from Eric.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
19 months agodrm/mxsfb: Use simple_display_pipe prepare_fb helper
Daniel Vetter [Thu, 5 Apr 2018 15:44:45 +0000 (17:44 +0200)]
drm/mxsfb: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch
19 months agodrm/pl111: Use simple_display_pipe prepare_fb helper
Daniel Vetter [Thu, 5 Apr 2018 15:44:44 +0000 (17:44 +0200)]
drm/pl111: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch
19 months agodrm/tve200: Use simple_display_pipe prepare_fb helper
Daniel Vetter [Thu, 5 Apr 2018 15:44:43 +0000 (17:44 +0200)]
drm/tve200: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch
19 months agodrm: Move simple_display_pipe prepare_fb helper into gem fb helpers
Daniel Vetter [Thu, 5 Apr 2018 15:44:42 +0000 (17:44 +0200)]
drm: Move simple_display_pipe prepare_fb helper into gem fb helpers

There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
19 months agodrm/vmwgfx: Remove no-op prepare/cleanup_fb callbacks
Daniel Vetter [Thu, 5 Apr 2018 15:44:41 +0000 (17:44 +0200)]
drm/vmwgfx: Remove no-op prepare/cleanup_fb callbacks

Less hits to go through when I git grep over all drivers. These
callbacks are optional.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
19 months agodrm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320
Hans de Goede [Wed, 18 Apr 2018 12:36:42 +0000 (14:36 +0200)]
drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320

The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.

While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com
19 months agodrm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310
Hans de Goede [Wed, 18 Apr 2018 12:36:41 +0000 (14:36 +0200)]
drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310

Some production batches of the Lenovo Ideapad Mixx 310 laptop use
a portrait LCD panel, add a quirk for this.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com
19 months agodrm/rockchip: psr: Remove flush by CRTC
Tomasz Figa [Mon, 23 Apr 2018 10:50:03 +0000 (12:50 +0200)]
drm/rockchip: psr: Remove flush by CRTC

It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
19 months agodrm/rockchip: Disallow PSR for the whole atomic commit
Tomasz Figa [Mon, 23 Apr 2018 10:50:02 +0000 (12:50 +0200)]
drm/rockchip: Disallow PSR for the whole atomic commit

Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.

This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
19 months agodrm/rockchip: psr: Sanitize semantics of allow/inhibit API
Tomasz Figa [Mon, 23 Apr 2018 10:50:01 +0000 (12:50 +0200)]
drm/rockchip: psr: Sanitize semantics of allow/inhibit API

Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.

Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
 - a counter is used to track the number of inhibit requests,
 - PSR is actually disabled in hardware on first inhibit request,
 - PSR enable work is scheduled on last allow request.

The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
19 months agodrm/rockchip: psr: Avoid redundant calls to .set() callback
Tomasz Figa [Mon, 23 Apr 2018 10:50:00 +0000 (12:50 +0200)]
drm/rockchip: psr: Avoid redundant calls to .set() callback

The first time after we call rockchip_drm_do_flush() after
rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The
difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a
delayed work pending - PSR is off in either state.  However
psr_set_state() only catches the transition from PSR_FLUSH to
PSR_DISABLE (which never happens), while going from PSR_DISABLE to
PSR_FLUSH triggers a call to psr->set() to disable PSR while it's
already disabled. This triggers the eDP PHY power-on sequence without
being shut down first and this seems to occasionally leave the encoder
unable to later enable PSR. Let's just simplify the state machine and
simply consider PSR_DISABLE and PSR_FLUSH the same state.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
19 months agodrm/rockchip: analogix_dp: Do not call Analogix code before bind
Tomasz Figa [Mon, 23 Apr 2018 10:49:59 +0000 (12:49 +0200)]
drm/rockchip: analogix_dp: Do not call Analogix code before bind

Driver callbacks, such as system suspend or resume can be called any
time, specifically they can be called before the component bind
callback. Let's use dp->adp pointer as a safeguard and skip calling
Analogix entry points if it is an ERR_PTR().

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Split the platform-specific poweron in two parts
Douglas Anderson [Mon, 23 Apr 2018 10:49:58 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Split the platform-specific poweron in two parts

Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code.  Some needs to happen after.  Let's
split the callback in two.

Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
19 months agodrm/rockchip: pre dither down when output bpc is 8bit
Mark Yao [Mon, 23 Apr 2018 10:49:57 +0000 (12:49 +0200)]
drm/rockchip: pre dither down when output bpc is 8bit

Some encoder have a crc verification check, crc check fail if
input and output data is not equal.

That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.

So pre dither down vop data to 8bit if panel's bpc is 8.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
Douglas Anderson [Mon, 23 Apr 2018 10:49:56 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip

The comments in analogix_dp_init_aux() claim that we're disabling aux
channel retries, but then right below it for Rockchip it sets them to
3.  If we actually need 3 retries for Rockchip then we could adjust
the comment, but it seems more likely that we want the same retry
behavior across all platforms.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-21-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Properly log AUX CH errors
Douglas Anderson [Mon, 23 Apr 2018 10:49:55 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly log AUX CH errors

The code in analogix_dp_transfer() that was supposed to print out:
  AUX CH error happened

Was actually dead code. That's because the previous check (whether
the interrupt status indicated any errors) would have hit for all
errors anyway.

Let's combine the two error checks so we can actually see AUX CH
errors.  We'll also downgrade the message to a warning since some of
these types of errors might be expected for some displays.  If this
gets too noisy we can downgrade again to debug.

Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-20-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
Douglas Anderson [Mon, 23 Apr 2018 10:49:54 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner

The current user of the analogix power_off is "analogix_dp-rockchip".
That driver does this:
- deactivate PSR
- turn off a clock

Both of these things (especially deactive PSR) should be done before
we turn the PHY power off and turn off analog power.  Let's move the
callback up.

Note that without this patch (and with
https://patchwork.kernel.org/patch/9553349/ [seanpaul: this patch was
not applied, but it seems like the race can still occur]), I experienced
an error in reboot testing where one thread was at:

  rockchip_drm_psr_deactivate
  rockchip_dp_powerdown
  analogix_dp_bridge_disable
  drm_bridge_disable

...and the other thread was at:

  analogix_dp_send_psr_spd
  analogix_dp_enable_psr
  analogix_dp_psr_set
  psr_flush_handler

The flush handler thread was finding AUX channel errors and eventually
reported "Failed to apply PSR", where I had a kgdb breakpoint. Presumably
the device would have eventually given up and shut down anyway, but it
seems better to fix the order to be more correct.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-19-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Move fast link training detect to set_bridge
zain wang [Mon, 23 Apr 2018 10:49:53 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Move fast link training detect to set_bridge

It's too early to detect fast link training, if other step after it
failed, we will set fast_link flag to 1, and retry set_bridge again. In
this case we will power down and power up panel power supply, and we
will do fast link training since we have set fast_link flag to 1. In
fact, we should do full link training now, not the fast link training.
So we should move the fast link detection at the end of set_bridge.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-18-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1
zain wang [Mon, 23 Apr 2018 10:49:52 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1

Register ANALOGIX_DP_FUNC_EN_1(offset 0x18), Rockchip is different to
Exynos:

on Exynos edp phy,
BIT 7 MASTER_VID_FUNC_EN_N
BIT 6 reserved
BIT 5 SLAVE_VID_FUNC_EN_N

on Rockchip edp phy,
BIT 7 reserved
BIT 6 RK_VID_CAP_FUNC_EN_N
BIT 5 RK_VID_FIFO_FUNC_EN_N

So, we should do some private operations to Rockchip.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-17-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Fix timeout of video streamclk config
zain wang [Mon, 23 Apr 2018 10:49:51 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix timeout of video streamclk config

The STRM_VALID bit in register ANALOGIX_DP_SYS_CTL_3 may be unstable,
so we may hit the error log "Timeout of video streamclk ok" since
checked this unstable bit.
In fact, we can go continue and the streamclk is ok if we wait enough time,
it does no effect on display.
Let's change this error to warn.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-16-enric.balletbo@collabora.com
19 months agodrm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
zain wang [Mon, 23 Apr 2018 10:49:50 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll

There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
instead of ANALOGIX_DP_PLL_CTL.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-15-enric.balletbo@collabora.com
19 months agodrm/rockchip: Restore psr->state when enable/disable psr failed
zain wang [Mon, 23 Apr 2018 10:49:49 +0000 (12:49 +0200)]
drm/rockchip: Restore psr->state when enable/disable psr failed

If we failed disable psr, it would hang the display until next psr
cycle coming. So we should restore psr->state when it failed.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com