sfrench/cifs-2.6.git
13 years agonfsd: fix oops on access from high-numbered ports
J. Bruce Fields [Fri, 14 Mar 2008 23:37:11 +0000 (19:37 -0400)]
nfsd: fix oops on access from high-numbered ports

This bug was always here, but before my commit 6fa02839bf9412e18e77
("recheck for secure ports in fh_verify"), it could only be triggered by
failure of a kmalloc().  After that commit it could be triggered by a
client making a request from a non-reserved port for access to an export
marked "secure".  (Exports are "secure" by default.)

The result is a struct svc_export with a reference count one too low,
resulting in likely oopses next time the export is accessed.

The reference counting here is not straightforward; a later patch will
clean up fh_verify().

Thanks to Lukas Hejtmanek for the bug report and followup.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agostruct export_operations: adjust comments to match current members
Marc Dionne [Fri, 14 Mar 2008 13:11:29 +0000 (13:11 +0000)]
struct export_operations: adjust comments to match current members

The comments in the definition of struct export_operations don't match the
current members.

Add a comment for the 2 new functions and remove 2 comments for unused ones.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Thu, 13 Mar 2008 20:25:32 +0000 (13:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Allocate priv->tx_ring with vmalloc()
  IPoIB/cm: Set tx_wr.num_sge in connected mode post_send()
  IPoIB: Don't drop multicast sends when they can be queued
  IB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets
  IB/ipath: Fix error completion put on send CQ instead of recv CQ
  IB/ipath: Fix RC QP initialization
  IB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp()
  IB/ipath: Fix IB compliance problems with link state vs physical state

13 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Thu, 13 Mar 2008 20:17:25 +0000 (13:17 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: checkpatch says s/__FUNCTION__/__func__/g
  iop-adma.c: replace remaining __FUNCTION__ occurrences
  fsldma: Add a completed cookie updated action in DMA finish interrupt.
  fsldma: Add device_prep_dma_interrupt support to fsldma.c
  dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.
  fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Thu, 13 Mar 2008 20:16:22 +0000 (13:16 -0700)]
Merge git://git./linux/kernel/git/gregkh/pci-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: fix issue with busses registering multiple times in sysfs

13 years agoavoid endless loops in lib/swiotlb.c
Jan Beulich [Thu, 13 Mar 2008 09:13:30 +0000 (09:13 +0000)]
avoid endless loops in lib/swiotlb.c

Commit 681cc5cd3efbeafca6386114070e0bfb5012e249 ("iommu sg merging:
swiotlb: respect the segment boundary limits") introduced two
possibilities for entering an endless loop in lib/swiotlb.c:

 - if max_slots is zero (possible if mask is ~0UL)
 - if the number of slots requested fits into a swiotlb segment, but is
   too large for the part of a segment which remains after considering
   offset_slots

This fixes them

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Thu, 13 Mar 2008 20:13:47 +0000 (13:13 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits)
  ACPI: thermal: show temperature in millidegree Celsius
  thermal: fix generic thermal I/F for hwmon
  acer-wmi: build depends on i8042
  documentation:  Move power-related files to Documentation/power/
  ACPI: buffer array too short in drivers/acpi/system.c
  acer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610
  acer-wmi: Fix DSDT path in documentation
  acer-wmi: Make device detection error messages more descriptive
  laptops: move laptop-mode.txt to Documentation/laptops/
  ACPICA: Warn if packages with invalid references are evaluated
  ACPI: add _PRT quirks to work around broken firmware
  Hibernation: Fix mark_nosave_pages()
  ACPI: Ignore _BQC object when registering backlight device
  ACPI: WMI: Clean up handling of spec violating data blocks
  acer-wmi: Don't warn if mail LED cannot be detected
  acer-wmi: Rename mail LED correctly & remove hardcoded colour
  ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify()
  ACPI: button: make real parent for input devices in device tree
  toshiba_acpi: Enable autoloading
  ACPI: EC: Handle IRQ storm on Acer laptops
  ...

13 years agoblock: floppy: fix rmmod lockup
Jiri Slaby [Thu, 13 Mar 2008 19:32:43 +0000 (12:32 -0700)]
block: floppy: fix rmmod lockup

Floppy rmmod locks up when no such hardware was initialized, since there is
nobody to wake the remove code up.  Remove the completion, because release is
called during platform_unregister anyway.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agokernel-doc: set verbose mode via environment
Randy Dunlap [Thu, 13 Mar 2008 19:32:43 +0000 (12:32 -0700)]
kernel-doc: set verbose mode via environment

Honor the environment variable "KBUILD_VERBOSE=1" (as set by make V=1) to
enable verbose mode in scripts/kernel-doc.  Useful for getting more info and
warnings from kernel-doc.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoalpha: use iommu_is_span_boundary helper function
FUJITA Tomonori [Thu, 13 Mar 2008 19:32:40 +0000 (12:32 -0700)]
alpha: use iommu_is_span_boundary helper function

iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs
(commit 3715863aa142c4f4c5208f5f3e5e9bac06006d2f).  Alpha's IOMMU can use it.

This removes the check on the boundary size alignment because
iommu_is_span_boundary does.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agochar: riscom, fix rc_board indexing
Jiri Slaby [Thu, 13 Mar 2008 19:32:39 +0000 (12:32 -0700)]
char: riscom, fix rc_board indexing

In riscom8_init_module, rc_board should be indexed by i, not by 0, otherwise
the loop is useless.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agospi_bitbang: short transfer status fix
Jan Nikitenko [Thu, 13 Mar 2008 19:32:39 +0000 (12:32 -0700)]
spi_bitbang: short transfer status fix

SPI controller drivers return number of bytes actually transfered from
bitbang->txrx_bufs() method.  This updates handling of short transfers (where
the transfer size is less than requested):

 - Even zero byte short transfers should report errors;
 - Include short transfers in the total of transferred bytes;
 - Use EREMOTEIO (like USB) not EMSGSIZE to report short transfers

Short transfers don't normally mean invalid message sizes, but if the
underlying controller driver needs to use EMSGSIZE it can still do so.

[db: fix two more minor issues]
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoau1550_spi: fix prototype of irq handler
Jan Nikitenko [Thu, 13 Mar 2008 19:32:38 +0000 (12:32 -0700)]
au1550_spi: fix prototype of irq handler

Remove struct pt_regs *regs from prototype of au1550_spi_irq handler to avoid
warning in request_irq().  Also fix comment type leadin.

Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoh8300: fix recent uaccess breakage
Yoshinori Sato [Thu, 13 Mar 2008 19:32:37 +0000 (12:32 -0700)]
h8300: fix recent uaccess breakage

Al Viro wrote:
>
>  After that commit in asm-h8300/uaccess.h we have
>
> #define get_user(x, ptr)                                        \
> ({                                                              \
>     int __gu_err = 0;                                           \
>     uint32_t __gu_val = 0;                              \
>     ^^^^^^^^^^^^^^^^^
>     switch (sizeof(*(ptr))) {                                   \
>     case 1:                                                     \
>     case 2:                                                     \
>     case 4:                                                     \
>         __gu_val = *(ptr);                                      \
>         break;                                                  \
>     case 8:                                                     \
>         memcpy(&__gu_val, ptr, sizeof (*(ptr)));                \
>                                ^^^^^^^^^^^^^^^^
>
> which, of course, is FUBAR whenever we actually hit that case - memcpy of
> 8 bytes into uint32_t is obviously wrong.  Why don't we simply do

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopagemap: proper read error handling
Marcelo Tosatti [Thu, 13 Mar 2008 19:32:35 +0000 (12:32 -0700)]
pagemap: proper read error handling

Fix pagemap_read() error handling by releasing acquired resources and checking
for get_user_pages() partial failure.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agosmackfs: do not trust `count' in inodes write()s
Ahmed S. Darwish [Thu, 13 Mar 2008 19:32:34 +0000 (12:32 -0700)]
smackfs: do not trust `count' in inodes write()s

Smackfs write() implementation does not put a higher bound on the number of
bytes to copy from user-space.  This may lead to a DOS attack if a malicious
`count' field is given.

Assure that given `count' is exactly the length needed for a /smack/load rule.
 In case of /smack/cipso where the length is relative, assure that `count'
does not exceed the size needed for a buffer representing maximum possible
number of CIPSO 2.2 categories.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoasync_tx: checkpatch says s/__FUNCTION__/__func__/g
Dan Williams [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
async_tx: checkpatch says s/__FUNCTION__/__func__/g

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agoiop-adma.c: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
iop-adma.c: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agofsldma: Add a completed cookie updated action in DMA finish interrupt.
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
fsldma: Add a completed cookie updated action in DMA finish interrupt.

The patch 'fsldma: do not cleanup descriptors in hardirq context'
(commit 222ccf9ab838a1ca7163969fabd2cddc10403fb5) removed descriptors
cleanup function to tasklet but the completed cookie do not updated.
Thus, the DMA controller will get lots of duplicated transfer
interrupts. Just make a completed cookie update in interrupt handler.
And keep other cleanup jobs in tasklet function.

Tested-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agofsldma: Add device_prep_dma_interrupt support to fsldma.c
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
fsldma: Add device_prep_dma_interrupt support to fsldma.c

This is a bug that I assigned DMA_INTERRUPT capability to fsldma
but missing device_prep_dma_interrupt function. For a bug in
dmaengine.c the driver passed BUG_ON() checking. The patch fixes it.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agodmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.

The device->device_prep_dma_interrupt function is used by
DMA_INTERRUPT capability, not DMA_ZERO_SUM.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agofsldma: Fix fsldma.c warning messages when it's compiled under PPC64.
Zhang Wei [Thu, 13 Mar 2008 17:45:27 +0000 (10:45 -0700)]
fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.

There are warning messages reported by Stephen Rothwell with
ARCH=powerpc allmodconfig build:

drivers/dma/fsldma.c: In function 'fsl_dma_prep_memcpy':
drivers/dma/fsldma.c:439: warning: comparison of distinct pointer types
lacks a cast
drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue':
drivers/dma/fsldma.c:584: warning: format '%016llx' expects type 'long long
unsigned int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt':
drivers/dma/fsldma.c:668: warning: format '%x' expects type 'unsigned int',
but argument 5 has type 'dma_addr_t'
drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long
unsigned int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long
unsigned int', but argument 5 has type 'dma_addr_t'
drivers/dma/fsldma.c:701: warning: format '%02x' expects type 'unsigned
int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c: In function 'fsl_dma_self_test':
drivers/dma/fsldma.c:840: warning: format '%d' expects type 'int', but
argument 5 has type 'size_t'
drivers/dma/fsldma.c: In function 'of_fsl_dma_probe':
drivers/dma/fsldma.c:1010: warning: format '%08x' expects type 'unsigned
int', but argument 5 has type 'resource_size_t'

This patch fixed the above warning messages.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
13 years agoPCI: fix issue with busses registering multiple times in sysfs
Greg Kroah-Hartman [Thu, 13 Mar 2008 04:48:03 +0000 (21:48 -0700)]
PCI: fix issue with busses registering multiple times in sysfs

PCI busses can be registered multiple times, so we need to detect if we
have registered our bus structure in sysfs already.  If so, don't do it
again.

Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting
the problem, and to Linus for poking me to get me to believe that it was
a real problem.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoMerge branches 'release' and 'doc' into release
Len Brown [Thu, 13 Mar 2008 05:59:53 +0000 (01:59 -0400)]
Merge branches 'release' and 'doc' into release

13 years agoMerge branches 'release', 'ejd', 'sony' and 'wmi' into release
Len Brown [Thu, 13 Mar 2008 05:59:52 +0000 (01:59 -0400)]
Merge branches 'release', 'ejd', 'sony' and 'wmi' into release

13 years agoMerge branches 'release', 'button-sysfs', 'misc', 'mismatch', 'randconfig' and 'toshi...
Len Brown [Thu, 13 Mar 2008 05:59:49 +0000 (01:59 -0400)]
Merge branches 'release', 'button-sysfs', 'misc', 'mismatch', 'randconfig' and 'toshiba' into release

13 years agoMerge branches 'release' and 'thermal' into release
Len Brown [Thu, 13 Mar 2008 05:59:46 +0000 (01:59 -0400)]
Merge branches 'release' and 'thermal' into release

13 years agoMerge branches 'release', 'bugzilla-8570', 'bugzilla-9966', 'bugzilla-9998', 'bugzill...
Len Brown [Thu, 13 Mar 2008 05:59:45 +0000 (01:59 -0400)]
Merge branches 'release', 'bugzilla-8570', 'bugzilla-9966', 'bugzilla-9998', 'bugzilla-10100', 'bugzilla-10132', 'bugzilla-10138' and 'bugzilla-10206' into release

13 years agoACPI: thermal: show temperature in millidegree Celsius
Zhang, Rui [Wed, 27 Feb 2008 23:51:30 +0000 (07:51 +0800)]
ACPI: thermal: show temperature in millidegree Celsius

as now required by the generic thermal I/F

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agothermal: fix generic thermal I/F for hwmon
Zhang, Rui [Wed, 27 Feb 2008 00:37:50 +0000 (08:37 +0800)]
thermal: fix generic thermal I/F for hwmon

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: build depends on i8042
Jiri Kosina [Mon, 10 Mar 2008 21:29:37 +0000 (22:29 +0100)]
acer-wmi: build depends on i8042

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 13 Mar 2008 00:56:37 +0000 (17:56 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] 4856/1: Orion: initialise the sixth PCIe MBUS mapping window as well
  [ARM] 4855/1: Orion: use correct ethernet unit address range
  [ARM] 4853/1: include uImage target in make help
  [ARM] 4851/1: ns9xxx: fix size of gpiores
  [ARM] AT91: correct at91sam9263ek LCD power gpio pin
  [ARM] replace remaining __FUNCTION__ occurrences
  [ARM] 4850/1: include generic pgtable.h for !CONFIG_MMU case
  [ARM] 4849/1: move ATAGS asm definitions
  [ARM] 4848/1: at91: remove false lockdep warnings
  [ARM] 4847/1: kprobes: fix compilation with CONFIG_DEBUG_FS=y
  [ARM] include/asm-arm - use angle brackets for includes
  [ARM] 4845/1: Orion: Ignore memory tags with invalid data
  ARM: OMAP2: Register the L4 io bus to boot OMAP2
  ARM: OMAP1: Compile in other 16xx boards to OSK defconfig
  ARM: OMAP1: Refresh H2 defconfig
  ARM: OMAP1: Refresh OSK defconfig
  ARM: OMAP: gpio lockdep updates
  ARM: OMAP1: omap1/pm.c build fix
  ARM: OMAP1: omap h2 regression fix
  ARM: OMAP1: Fix compile for boards depending on old gpio expander
  ...

13 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Thu, 13 Mar 2008 00:00:35 +0000 (17:00 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (22 commits)
  [POWERPC] Fix large hash table allocation on Cell blades
  [POWERPC] Export empty_zero_page
  [POWERPC] Fix viodasd driver with scatterlist debug
  [POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
  [POWERPC] Fix drivers/macintosh/mediabay.c when !CONFIG_ADB_PMU
  [POWERPC] Fix undefined pmu_sys_suspended compilation error
  [POWERPC] Fix build of modular drivers/macintosh/apm_emu.c
  [POWERPC] Fix sleep on some powerbooks
  [POWERPC] Fix bogus test for unassigned PCI resources
  [POWERPC] Fix zImage-dtb.initrd build error
  [POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels
  [POWERPC] spufs: fix rescheduling of non-runnable contexts
  [POWERPC] spufs: don't (ab)use SCHED_IDLE
  [POWERPC] QE: Make qe_get_firmware_info reentrant
  [POWERPC] 83xx: Make 83xx perfmon support selectable
  [PPC] 8xx: swap bug-fix
  [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map
  [POWERPC] QE: Fix QE firmware uploading limit
  [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.
  [POWERPC] 8xx: fix swap
  ...

13 years ago[POWERPC] Fix large hash table allocation on Cell blades
Michael Ellerman [Wed, 12 Mar 2008 07:03:24 +0000 (18:03 +1100)]
[POWERPC] Fix large hash table allocation on Cell blades

My recent hack to allocate the hash table under 1GB on cell was poorly
tested, *cough*. It turns out on blades with large amounts of memory we
fail to allocate the hash table at all. This is because RTAS has been
instantiated just below 768MB, and 0-x MB are used by the kernel,
leaving no areas that are both large enough and also naturally-aligned.

For the cell IOMMU hack the page tables must be under 2GB, so use that
as the limit instead. This has been tested on real hardware and boots
happily.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Export empty_zero_page
Theodore Ts'o [Wed, 12 Mar 2008 20:24:31 +0000 (07:24 +1100)]
[POWERPC] Export empty_zero_page

Once again, this time with feeling....

- Ted

>From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 12 Mar 2008 11:50:39 -0400
Subject: Export empty_zero_page

The empty_zero_page symbol is exported by most other architectures
(s390, ia64, x86, um), and an upcoming ext4 patch needs it because
ZERO_PAGE() references empty_zero_page, and we need it to zero out an
unitialized extents in ext4 files.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix viodasd driver with scatterlist debug
Benjamin Herrenschmidt [Wed, 12 Mar 2008 06:23:56 +0000 (17:23 +1100)]
[POWERPC] Fix viodasd driver with scatterlist debug

The iSeries viodasd drivers does some very strange things with
scatterlists, one of these causing a BUG_ON to trigger when
scatterlist debugging is enabled due to initializing the
scatterlist with memset instead of sg_init_table().

This fixes it by using sg_init_table().  The rest of the stuff
it does to that poor list is still pretty awful but it will work.

I may look into fixing things in a nicer way some other time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
Tony Breeds [Tue, 11 Mar 2008 23:48:48 +0000 (10:48 +1100)]
[POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU

When building arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
we get the following warnings:

arch/powerpc/platforms/powermac/pic.c: In function 'pmacpic_find_viaint':
arch/powerpc/platforms/powermac/pic.c:623: warning: label 'not_found' defined but not used

This fixes it.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix drivers/macintosh/mediabay.c when !CONFIG_ADB_PMU
Tony Breeds [Tue, 11 Mar 2008 23:48:48 +0000 (10:48 +1100)]
[POWERPC] Fix drivers/macintosh/mediabay.c when !CONFIG_ADB_PMU

When building drivers/macintosh/mediabay.c if CONFIG_ADB_PMU isn't
defined we get:

drivers/built-in.o: In function `media_bay_step':
mediabay.c:(.text+0x92b84): undefined reference to `pmu_suspend'
mediabay.c:(.text+0x92c08): undefined reference to `pmu_resume'

Create empty place holders in that scenario.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix undefined pmu_sys_suspended compilation error
Tony Breeds [Tue, 11 Mar 2008 23:48:48 +0000 (10:48 +1100)]
[POWERPC] Fix undefined pmu_sys_suspended compilation error

pmu_sys_suspended is declared extern when:
defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
but only defined when:
defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
which is wrong.  Let's fix that.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix build of modular drivers/macintosh/apm_emu.c
Guido Guenther [Sat, 8 Mar 2008 19:20:17 +0000 (06:20 +1100)]
[POWERPC] Fix build of modular drivers/macintosh/apm_emu.c

Currently, if drivers/macintosh/apm_emu is a module and the config
doesn't have CONFIG_SUSPEND we get:

ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined!

on PPC32.  The variables aren't wrapped in '#if defined(CONFIG_SUSPEND)'
so we probably shouldn't wrap the exports either.  This removes the
CONFIG_SUSPEND part of the export, which fixes compilation on ppc32.

Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix sleep on some powerbooks
Benjamin Herrenschmidt [Mon, 3 Mar 2008 06:27:46 +0000 (17:27 +1100)]
[POWERPC] Fix sleep on some powerbooks

The PMU backlight code would kick in during sleep/resume even on
machines that use a different backlight method.  This breaks
sleep on some PowerBooks.

This fixes it by adding a flag to indicate whether the backlight
is controlled by the PMU, and testing that before trying to use
the PMU to turn off the backlight during sleep.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix bogus test for unassigned PCI resources
Benjamin Herrenschmidt [Fri, 29 Feb 2008 03:58:03 +0000 (14:58 +1100)]
[POWERPC] Fix bogus test for unassigned PCI resources

A bogus test for unassigned resources that came from our 32-bit
PCI code ended up being "merged" by my previous patch series,
breaking some 64-bit setups where devices have legal resources
ending at 0xffffffff.

This fixes it by completely changing the test.  We now test for
res->start == 0, as the generic code expects, and we also only
do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag
set, as there are cases of pSeries and iSeries where it could
be a valid value and those can't reassign devices.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Fix zImage-dtb.initrd build error
Grant Likely [Thu, 21 Feb 2008 18:57:07 +0000 (05:57 +1100)]
[POWERPC] Fix zImage-dtb.initrd build error

The pattern substitution rules were failing when used with zImage-dtb
targets.  If zImage-dtb.initrd was selected, the pattern substitution
would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which
caused the build to fail.

This renames zImage-dtb to dtbImage to avoid the problem entirely.
By not using the zImage prefix then is no potential for namespace
collisions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years ago[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels
Paul Mackerras [Wed, 12 Mar 2008 22:39:55 +0000 (09:39 +1100)]
[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels

Some drivers (such as V4L2) have code that causes gcc to generate
calls to __ucmpdi2 when compiling for 32-bit powerpc, which results
in either a link-time error or a module that can't be loaded, as
we don't currently have a __ucmpdi2.  This adds one so these drivers
can be used.

Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years agodocumentation: Move power-related files to Documentation/power/
Randy Dunlap [Wed, 12 Mar 2008 22:10:51 +0000 (18:10 -0400)]
documentation:  Move power-related files to Documentation/power/

Move 00-INDEX entries to power/00-INDEX (and add entry for
pm_qos_interface.txt).

Update references to moved filenames.

Fix some trailing whitespace.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoACPI: buffer array too short in drivers/acpi/system.c
Johann Felix Soden [Tue, 11 Mar 2008 15:44:26 +0000 (16:44 +0100)]
ACPI: buffer array too short in drivers/acpi/system.c

Since "ff_gbl_lock" has a length of 11 chars and is copied with sprintf
to char buffer[10], there is a problem. We need char buffer[12] because
of the closing zero byte.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610
Carlos Corbacho [Wed, 12 Mar 2008 20:13:00 +0000 (20:13 +0000)]
acer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: Fix DSDT path in documentation
Carlos Corbacho [Wed, 12 Mar 2008 20:12:55 +0000 (20:12 +0000)]
acer-wmi: Fix DSDT path in documentation

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: Make device detection error messages more descriptive
Carlos Corbacho [Wed, 12 Mar 2008 20:12:50 +0000 (20:12 +0000)]
acer-wmi: Make device detection error messages more descriptive

The current device detection error messages are all copy & pasted - make
them more descriptive so it's easier to see where in the code a problem
occurs.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 12 Mar 2008 20:08:09 +0000 (13:08 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  [SCTP]: Fix local_addr deletions during list traversals.
  net: fix build with CONFIG_NET=n
  [TCP]: Prevent sending past receiver window with TSO (at last skb)
  rt2x00: Add new D-Link USB ID
  rt2x00: never disable multicast because it disables broadcast too
  libertas: fix the 'compare command with itself' properly
  drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entry
  [NETFILTER]: nf_queue: don't return error when unregistering a non-existant handler
  [NETFILTER]: nfnetlink_queue: fix EPERM when binding/unbinding and instance 0 exists
  [NETFILTER]: nfnetlink_log: fix EPERM when binding/unbinding and instance 0 exists
  [NETFILTER]: nf_conntrack: replace horrible hack with ksize()
  [NETFILTER]: nf_conntrack: add \n to "expectation table full" message
  [NETFILTER]: xt_time: fix failure to match on Sundays
  [NETFILTER]: nfnetlink_log: fix computation of netlink skb size
  [NETFILTER]: nfnetlink_queue: fix computation of allocated size for netlink skb.
  [NETFILTER]: nfnetlink: fix ifdef in nfnetlink_compat.h
  [NET]: include <linux/types.h> into linux/ethtool.h for __u* typedef
  [NET]: Make /proc/net a symlink on /proc/self/net (v3)
  RxRPC: fix rxrpc_recvmsg()'s returning of msg_name
  net/enc28j60: oops fix
  ...

13 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Wed, 12 Mar 2008 20:07:12 +0000 (13:07 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: chips subdirectory is deprecated
  i2c: Keep client->driver and client->dev.driver in sync
  i2c-amd756: Fix off-by-one

13 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 12 Mar 2008 20:04:11 +0000 (13:04 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Clocksource: Only install r4k counter as clocksource if present.
  [MIPS] Lasat: fix LASAT_CASCADE_IRQ
  [MIPS] Delete leftovers of old pcspeaker support.
  [MIPS] BCM1480: Init pci controller io_map_base
  [MIPS] Yosemite: Fix a few more section reference bugs.
  [MIPS] Fix yosemite build error
  [MIPS] Fix loads of section missmatches
  [MIPS] IP27: Tighten up CPU description to fix warnings.
  [MIPS] Fix plat_ioremap for JMR3927
  [MIPS] Export __ucmpdi2 to modules.
  [MIPS] Fix typo in comment
  [MIPS] Use KBUILD_DEFCONFIG
  [MIPS] Allow 48Hz to be selected if CONFIG_SYS_SUPPORTS_ARBIT_HZ is set.
  [MIPS] Added missing cases for rdhwr emulation
  [MIPS] Alchemy: Fix ids in Alchemy db dma device table

13 years agoPNP: disable PNP motherboard resources that overlap PCI BARs
Bjorn Helgaas [Tue, 11 Mar 2008 21:24:41 +0000 (15:24 -0600)]
PNP: disable PNP motherboard resources that overlap PCI BARs

Some BIOSes have PNP motherboard devices with resources that
partially overlap PCI BARs.  The PNP system driver claims these
motherboard resources, which prevents the normal PCI driver from
requesting them later.

This patch disables the PNP resources that conflict with PCI BARs
so they won't be claimed by the PNP system driver.

Of course, this only works if PCI devices have already been enumerated.
Currently this is the case because PCI devices are discovered before
any PNP init via this path:

    acpi_pci_root_init() -> acpi_pci_root_add() -> pci_acpi_scan_root() ->
pci_scan_bus_parented() -> pci_scan_child_bus() -> ...

Avuton Olrich tested this and confirmed that it fixes his ALSA sound
card (see http://lkml.org/lkml/2008/1/27/168).

References:
    https://bugzilla.redhat.com/show_bug.cgi?id=280641
    https://bugzilla.redhat.com/show_bug.cgi?id=313491
    http://lkml.org/lkml/2008/1/9/449
    http://thread.gmane.org/gmane.linux.acpi.devel/27312
    http://lkml.org/lkml/2008/1/27/168

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoPNP: revert Supermicro H8DCE motherboard quirk
Bjorn Helgaas [Tue, 11 Mar 2008 21:24:40 +0000 (15:24 -0600)]
PNP: revert Supermicro H8DCE motherboard quirk

There are other systems with similar problems
(http://lkml.org/lkml/2008/1/27/168), so we need a more
generic quirk.  Remove the Supermicro-specific one first.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoSVCRDMA: Fix erroneous BUG_ON in send_write
Tom Tucker [Tue, 11 Mar 2008 18:31:40 +0000 (14:31 -0400)]
SVCRDMA: Fix erroneous BUG_ON in send_write

The assertion that checks for sge context overflow is
incorrectly hard-coded to 32. This causes a kernel bug
check when using big-data mounts. Changed the BUG_ON to
use the computed value RPCSVC_MAXPAGES.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoSVCRDMA: Add xprt refs to fix close/unmount crash
Tom Tucker [Tue, 11 Mar 2008 18:31:39 +0000 (14:31 -0400)]
SVCRDMA: Add xprt refs to fix close/unmount crash

RDMA connection shutdown on an SMP machine can cause a kernel crash due
to the transport close path racing with the I/O tasklet.

Additional transport references were added as follows:
- A reference when on the DTO Q to avoid having the transport
  deleted while queued for I/O.
- A reference while there is a QP able to generate events.
- A reference until the DISCONNECTED event is received on the CM ID

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agogenhd must_check warning fix
Roland McGrath [Wed, 12 Mar 2008 00:13:15 +0000 (17:13 -0700)]
genhd must_check warning fix

Fixes:

block/genhd.c:361: warning: ignoring return value of ‘class_register’, declared with attribute warn_unused_result

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoRemove <linux/genhd.h> from user-visible headers.
David Woodhouse [Wed, 12 Mar 2008 16:52:56 +0000 (17:52 +0100)]
Remove <linux/genhd.h> from user-visible headers.

It was all wrapped in '#ifdef CONFIG_BLOCK' anyway, so userspace was
getting nothing useful out of it. And the special #ifndef __KERNEL__
version of 'struct partition' makes me inclined to promote an attitude
of violence...

Stick some comments on some of the #endifs too, while we're at it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonommu: Provide is_vmalloc_addr() stub.
Paul Mundt [Wed, 12 Mar 2008 07:51:31 +0000 (16:51 +0900)]
nommu: Provide is_vmalloc_addr() stub.

Introduced in commit-id 9e2779fa281cfda13ac060753d674bbcaa23367e and
ifdef'ed out for nommu in 8ca3ed87db062201e1fa15b64a9214e193fc3a8a, both
approaches end up breaking the nommu build in different ways. An
impressive feat for a 2-liner.

Current is_vmalloc_addr() users fall in to two camps:

- Determining whether to use vfree()/kfree()
- Whether to do vmlist traversal (only /proc/kcore).

Since we don't support /proc/kcore on nommu, that leaves the
vfree()/kfree() determination use cases. nommu vfree() happens to be a
wrapper to kfree() anyways, so is_vmalloc_addr() can always return 0
and end up with the right behaviour.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoIPoIB: Allocate priv->tx_ring with vmalloc()
Roland Dreier [Wed, 12 Mar 2008 14:51:03 +0000 (07:51 -0700)]
IPoIB: Allocate priv->tx_ring with vmalloc()

Commit 7143740d ("IPoIB: Add send gather support") made struct
ipoib_tx_buf significantly larger, since the mapping member changed
from a single u64 to an array with MAX_SKB_FRAGS + 1 entries.  This
means that allocating tx_rings with kzalloc() may fail because there
is not enough contiguous memory for the new, much bigger size.  Fix
this regression by allocating the rings with vmalloc() instead.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years ago[MIPS] Clocksource: Only install r4k counter as clocksource if present.
Ralf Baechle [Wed, 12 Mar 2008 13:58:10 +0000 (13:58 +0000)]
[MIPS] Clocksource: Only install r4k counter as clocksource if present.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Lasat: fix LASAT_CASCADE_IRQ
Yoichi Yuasa [Wed, 20 Feb 2008 14:11:53 +0000 (23:11 +0900)]
[MIPS] Lasat: fix LASAT_CASCADE_IRQ

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Delete leftovers of old pcspeaker support.
Ralf Baechle [Mon, 10 Mar 2008 16:20:00 +0000 (16:20 +0000)]
[MIPS] Delete leftovers of old pcspeaker support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] BCM1480: Init pci controller io_map_base
Thomas Bogendoerfer [Sat, 8 Mar 2008 18:51:55 +0000 (19:51 +0100)]
[MIPS] BCM1480: Init pci controller io_map_base

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Yosemite: Fix a few more section reference bugs.
Ralf Baechle [Mon, 10 Mar 2008 12:11:48 +0000 (12:11 +0000)]
[MIPS] Yosemite: Fix a few more section reference bugs.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Fix yosemite build error
Ralf Baechle [Mon, 10 Mar 2008 09:31:50 +0000 (09:31 +0000)]
[MIPS] Fix yosemite build error

<linux/mm.h> didn't pickup the definition of PKMAP_BASE from fixmap.h, ugh.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Fix loads of section missmatches
Ralf Baechle [Sat, 8 Mar 2008 09:56:28 +0000 (09:56 +0000)]
[MIPS] Fix loads of section missmatches

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] IP27: Tighten up CPU description to fix warnings.
Ralf Baechle [Sat, 8 Mar 2008 09:44:37 +0000 (09:44 +0000)]
[MIPS] IP27: Tighten up CPU description to fix warnings.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Fix plat_ioremap for JMR3927
Atsushi Nemoto [Sat, 26 Jan 2008 05:08:02 +0000 (14:08 +0900)]
[MIPS] Fix plat_ioremap for JMR3927

TX39XX's "reserved" segment in CKSEG3 area is 0xff000000-0xfffeffff.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Export __ucmpdi2 to modules.
Ralf Baechle [Tue, 4 Mar 2008 09:03:09 +0000 (09:03 +0000)]
[MIPS] Export __ucmpdi2 to modules.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Fix typo in comment
Thiemo Seufer [Fri, 29 Feb 2008 00:43:47 +0000 (00:43 +0000)]
[MIPS] Fix typo in comment

We support now other page sizes as well.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Use KBUILD_DEFCONFIG
Adrian Bunk [Tue, 26 Feb 2008 19:54:54 +0000 (21:54 +0200)]
[MIPS] Use KBUILD_DEFCONFIG

With KBUILD_DEFCONFIG we don't have to ship a second copy of ip22_defconfig.

Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Allow 48Hz to be selected if CONFIG_SYS_SUPPORTS_ARBIT_HZ is set.
Ralf Baechle [Mon, 25 Feb 2008 16:55:29 +0000 (16:55 +0000)]
[MIPS] Allow 48Hz to be selected if CONFIG_SYS_SUPPORTS_ARBIT_HZ is set.

This allows a 48Hz clock to be selected on Malta and other systems.  Note
this not normally a sensible option as it results in rather high latencies
for some kernel stuff.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Added missing cases for rdhwr emulation
Chris Dearman [Mon, 8 May 2006 17:02:16 +0000 (18:02 +0100)]
[MIPS] Added missing cases for rdhwr emulation

Some of these are architecturally required for R2 processors so lets try
to be bit closer to the real thing.  This also provides access to the
CPU cycle timer, even on multiprocessors.  In that aspect its currently
bug compatible to what would happen on a R2-based SMP.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years ago[MIPS] Alchemy: Fix ids in Alchemy db dma device table
Wolfgang Ocker [Sun, 10 Feb 2008 19:31:33 +0000 (20:31 +0100)]
[MIPS] Alchemy: Fix ids in Alchemy db dma device table

0 is a valid device id (DSCR_CMD0_UART0_TX), so we can't use it to mark
an empty entry in the device table. Use ~0 instead and search for id ~0
when looking for a free entry.

Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoi2c: chips subdirectory is deprecated
Jean Delvare [Wed, 12 Mar 2008 13:15:00 +0000 (14:15 +0100)]
i2c: chips subdirectory is deprecated

Let driver authors know that drivers/i2c/chips is usually the wrong place
for new drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
13 years agoi2c: Keep client->driver and client->dev.driver in sync
Hans Verkuil [Wed, 12 Mar 2008 13:15:00 +0000 (14:15 +0100)]
i2c: Keep client->driver and client->dev.driver in sync

Ensure that client->driver is set to NULL if the probe() returns an
error (this keeps client->driver and client->dev.driver in sync).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
13 years agoi2c-amd756: Fix off-by-one
Adrian Bunk [Wed, 12 Mar 2008 13:15:00 +0000 (14:15 +0100)]
i2c-amd756: Fix off-by-one

This patch fixes an off-by-one error spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
13 years agolaptops: move laptop-mode.txt to Documentation/laptops/
Randy Dunlap [Tue, 4 Mar 2008 21:41:26 +0000 (13:41 -0800)]
laptops: move laptop-mode.txt to Documentation/laptops/

Move laptop-mode.txt into the laptops/ sub-directory to consolidate
laptop doc files there.

Update references to the file's location.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs into...
Paul Mackerras [Wed, 12 Mar 2008 06:13:57 +0000 (17:13 +1100)]
Merge branch 'master' of git://git./linux/kernel/git/jk/spufs into merge

13 years agoACPICA: Warn if packages with invalid references are evaluated
Thomas Renninger [Wed, 12 Mar 2008 00:06:24 +0000 (01:06 +0100)]
ACPICA: Warn if packages with invalid references are evaluated

And return an error to avoid NULL pointer access by the caller
Lin Ming's patch avoids corrupted mem access when
BIOS has invalid references included, the handle is now zero
instead of corrupted.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoACPI: add _PRT quirks to work around broken firmware
Bjorn Helgaas [Tue, 11 Mar 2008 20:45:15 +0000 (13:45 -0700)]
ACPI: add _PRT quirks to work around broken firmware

This patch works around incorrect _PRT (PCI interrupt routing)
information from firmware.  This does not fix any regressions
and can wait for the next kernel release.

On the Medion MD9580-F laptop, the BIOS says the builtin RTL8139
NIC interrupt at 00:09.0[A] is connected to \_SB.PCI0.ISA.LNKA, but
it's really connected to \_SB.PCI0.ISA.LNKB.  Before this patch,
the workaround was to use "pci=routeirq".  More details at
http://bugzilla.kernel.org/show_bug.cgi?id=4773.

On the Dell OptiPlex GX1, the BIOS says the PCI slot interrupt
00:0d[A] is connected to LNKB, but it's really connected to LNKA.
Before this patch, the workaround was to use "pci=routeirq".
Pierre Ossman tested a previous version of this patch and confirmed
that it fixed the problem.  More details at
http://bugzilla.kernel.org/show_bug.cgi?id=5044.

On the HP t5710 thin client, the BIOS says the builtin Radeon
video interrupt at 01:00[A] is connected to LNK1, but it's really
connected to LNK3.  The previous workaround was to use a custom
DSDT.  I tested this patch and verified that it fixes the problem.
More details at http://bugzilla.kernel.org/show_bug.cgi?id=10138.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoHibernation: Fix mark_nosave_pages()
Rafael J. Wysocki [Tue, 11 Mar 2008 23:34:57 +0000 (00:34 +0100)]
Hibernation: Fix mark_nosave_pages()

There is a problem in the hibernation code that triggers on some NUMA
systems on which pfn_valid() returns 'true' for some PFNs that don't
belong to any zone.  Namely, there is a BUG_ON() in
memory_bm_find_bit() that triggers for PFNs not belonging to any
zone and passing the pfn_valid() test.  On the affected systems it
triggers when we mark PFNs reported by the platform as not saveable,
because the PFNs in question belong to a region mapped directly using
iorepam() (i.e. the ACPI data area) and they pass the pfn_valid()
test.

Modify memory_bm_find_bit() so that it returns an error if given PFN
doesn't belong to any zone instead of crashing the kernel and ignore
the result returned by it in mark_nosave_pages(), while marking the
"nosave" memory regions.

This doesn't affect the hibernation functionality, as we won't touch
the PFNs in question anyway.

http://bugzilla.kernel.org/show_bug.cgi?id=9966 .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoACPI: Ignore _BQC object when registering backlight device
Zhao Yakui [Tue, 11 Mar 2008 08:56:47 +0000 (16:56 +0800)]
ACPI: Ignore _BQC object when registering backlight device

According to acpi spec , the objects of  _BCL and _BCM are required if
integrated LCD is present and supports brightness level .The _BQC is
the optional object. So the _BQC object is ignored when the backlight device
is registered in ACPI video driver.

http://bugzilla.kernel.org/show_bug.cgi?id=10206

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoIPoIB/cm: Set tx_wr.num_sge in connected mode post_send()
Roland Dreier [Wed, 12 Mar 2008 01:35:20 +0000 (18:35 -0700)]
IPoIB/cm: Set tx_wr.num_sge in connected mode post_send()

Commit 7143740d ("IPoIB: Add send gather support") made it possible
for tx_wr.num_sge to be != 1 -- this happens if send gather support is
enabled.  However, the code in the connected mode post_send() function
assumes the old invariant, namely that tx_wr.num_sge is always 1.  Fix
this by explicitly setting tx_wr.num_sge to 1 in the CM post_send().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years ago[SCTP]: Fix local_addr deletions during list traversals.
Chidambar 'ilLogict' Zinnoury [Wed, 12 Mar 2008 01:05:02 +0000 (18:05 -0700)]
[SCTP]: Fix local_addr deletions during list traversals.

Since the lists are circular, we need to explicitely tag
the address to be deleted since we might end up freeing
the list head instead.  This fixes some interesting SCTP
crashes.

Signed-off-by: Chidambar 'ilLogict' Zinnoury <illogict@online.fr>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: fix build with CONFIG_NET=n
Andrew Morton [Wed, 12 Mar 2008 01:03:35 +0000 (18:03 -0700)]
net: fix build with CONFIG_NET=n

fs/built-in.o:(.rodata+0x1134): undefined reference to `proc_net_inode_operations'
fs/built-in.o:(.rodata+0x1138): undefined reference to `proc_net_operations'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years ago[TCP]: Prevent sending past receiver window with TSO (at last skb)
Ilpo Järvinen [Wed, 12 Mar 2008 00:55:27 +0000 (17:55 -0700)]
[TCP]: Prevent sending past receiver window with TSO (at last skb)

With TSO it was possible to send past the receiver window when the skb
to be sent was the last in the write queue while the receiver window
is the limiting factor. One can notice that there's a loophole in the
tcp_mss_split_point that lacked a receiver window check for the
tcp_write_queue_tail() if also cwnd was smaller than the full skb.

Noticed by Thomas Gleixner <tglx@linutronix.de> in form of "Treason
uncloaked! Peer ... shrinks window .... Repaired."  messages (the peer
didn't actually shrink its window as the message suggests, we had just
sent something past it without a permission to do so).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoACPI: WMI: Clean up handling of spec violating data blocks
Carlos Corbacho [Sun, 24 Feb 2008 13:34:34 +0000 (13:34 +0000)]
ACPI: WMI: Clean up handling of spec violating data blocks

Acer violate the ACPI-WMI spec by declaring some of their data blocks as
expensive, but with no corresponding WCxx method. There is already some
workaround code in to handle the initial WCxx call (we just ignore a
failure here); but we need to properly check if the second, "clean up",
WCxx call is actually needed or not, rather than fail simply because it
isn't there.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: Don't warn if mail LED cannot be detected
Carlos Corbacho [Sun, 24 Feb 2008 13:34:29 +0000 (13:34 +0000)]
acer-wmi: Don't warn if mail LED cannot be detected

This warning confuses users, who think it is an error. Not detecting the
mail LED simply means it isn't there, so let's not unduly panic users.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoacer-wmi: Rename mail LED correctly & remove hardcoded colour
Carlos Corbacho [Sun, 24 Feb 2008 13:34:18 +0000 (13:34 +0000)]
acer-wmi: Rename mail LED correctly & remove hardcoded colour

The mail LED name for acer-wmi currently hardcodes in the colour as green.
This is wrong, since many of the newer laptops now come with an orange
LED, and we have no way of telling what colour is used on a given system.

Also, rename the mail LED to be inline with the current recommendations of
the LED class documentation.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
13 years agoIPoIB: Don't drop multicast sends when they can be queued
Or Gerlitz [Tue, 11 Mar 2008 14:10:02 +0000 (16:10 +0200)]
IPoIB: Don't drop multicast sends when they can be queued

When set_multicast_list() is called the multicast task is restarted
and the IPOIB_MCAST_STARTED bit is cleared.  As a result for some
window of time, multicast packets are not transmitted nor queued but
rather dropped by ipoib_mcast_send().  These dropped packets are
painful in two cases:

 - bonding fail-over which both calls set_multicast_list() on the new
   active slave and sends Gratuitous ARP through that slave.

 - IP_DROP_MEMBERSHIP code which both calls set_multicast_list() on the
   device and issues IGMP leave.

In both these cases, depending on the scheduling of the IPoIB
multicast task, the packets would be dropped.  As a result, in the
bonding case, the failover would not be detected by the peers until
their neighbour is renewed the neighbour (which takes a few tens of
seconds).  In the IGMP case, the IP router doesn't get an IGMP leave
and would only learn on that from further probes on the group (also a
delay of at least a few tens of seconds).

Fix this by allowing transmission (or queuing) depending on the
IPOIB_FLAG_OPER_UP flag instead of the IPOIB_MCAST_STARTED flag.

Signed-off-by: Olga Shern <olgas@voltaire.com>
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets
Patrick Marchand Latifi [Thu, 21 Feb 2008 03:08:10 +0000 (19:08 -0800)]
IB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets

Reset the retry counter when we get a good RDMA_READ_RESPONSE_MIDDLE
packet.  This fix will prevent the requester from reporting a retry
exceeded error too early.

Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
13 years agoIB/ipath: Fix error completion put on send CQ instead of recv CQ
Patrick Marchand Latifi [Thu, 31 Jan 2008 08:24:37 +0000 (00:24 -0800)]
IB/ipath: Fix error completion put on send CQ instead of recv CQ

A work completion entry could be placed on the wrong completion
queue when an RC QP is placed in the error state.

Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/ipath: Fix RC QP initialization
Patrick Marchand Latifi [Sat, 19 Jan 2008 04:10:48 +0000 (20:10 -0800)]
IB/ipath: Fix RC QP initialization

This patch fixes the initialization of RC QPs, since we would rely on
the queue pair type (ibqp->qp_type) being set, but this field is only
initialized when we return from ipath_create_qp (it is initialized by
the user-level verbs library).

The fix is to not depend on this field to initialize the send and
the receive state of the RC QP.

Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp()
Patrick Marchand Latifi [Tue, 8 Jan 2008 07:43:04 +0000 (23:43 -0800)]
IB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp()

There can be a case where the requester's rnr retry counter
(s_rnr_retry) is less than the number of rnr retries allowed per QP
(s_rnr_retry_cnt).  This can happen if the s_rnr_retry counter is being
decremented and an ipath_query_qp call is issued during that time frame.
The fix is to always return the number of rnr retries allowed per QP
instead of the requester's rnr counter.

Found by code review.

Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/ipath: Fix IB compliance problems with link state vs physical state
Ralph Campbell [Fri, 14 Dec 2007 09:53:56 +0000 (01:53 -0800)]
IB/ipath: Fix IB compliance problems with link state vs physical state

Subnet manager SetPortinfo messages distingush between changing the link
state (DOWN, ARM, ACTIVE) and the link physical state (POLL, SLEEP,
DISABLED).  These are somewhat independent commands and affect when link
width and speed changes take effect.  Without this patch, a link DOWN
physical state NOP command was causing the link width and speed settings
to take effect which should only happen when the link physical state is
goes down (either by a SMP or some link physical error like link errors
exceeding the threshold).

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agort2x00: Add new D-Link USB ID
Ivo van Doorn [Sun, 9 Mar 2008 21:42:32 +0000 (22:42 +0100)]
rt2x00: Add new D-Link USB ID

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agort2x00: never disable multicast because it disables broadcast too
Adam Baker [Sun, 9 Mar 2008 21:40:40 +0000 (22:40 +0100)]
rt2x00: never disable multicast because it disables broadcast too

On rt73 and rt61 disabling reception of multicast packets also disables
broadcast traffic which we never want to do. Therefore we should never
disable multicast.

Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agolibertas: fix the 'compare command with itself' properly
Sebastian Siewior [Thu, 6 Mar 2008 09:30:21 +0000 (10:30 +0100)]
libertas: fix the 'compare command with itself' properly

|libertas: Invalid CMD_RESP 8012 to command 50!

The special case got mixed up in 8a96df80b3.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>