sfrench/cifs-2.6.git
5 years agoMerge tag 'usb-serial-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Fri, 19 May 2017 08:10:07 +0000 (10:10 +0200)]
Merge tag 'usb-serial-4.12-rc2' of git://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.12-rc2

Here's a fix for a long-standing issue in the ftdi_sio driver that
prevented unprivileged users from updating the low-latency flag,
something which became apparent after a recent change that restored the
older setting of not using low-latency mode by default.

A run of sparse revealed a couple of endianness issues that are now
fixed, and addressed is also a user-triggerable division-by-zero in
io_ti when debugging is enabled.

Finally there are some new device ids, including a simplification of how
we deal with a couple of older Olimex JTAG adapters.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agousb: musb: tusb6010_omap: Do not reset the other direction's packet size
Peter Ujfalusi [Wed, 17 May 2017 16:23:11 +0000 (11:23 -0500)]
usb: musb: tusb6010_omap: Do not reset the other direction's packet size

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: musb: Fix trying to suspend while active for OTG configurations
Tony Lindgren [Wed, 17 May 2017 16:23:10 +0000 (11:23 -0500)]
usb: musb: Fix trying to suspend while active for OTG configurations

Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe
lock order error") caused a regression where musb keeps trying to
enable host mode with no cable connected. This seems to be caused
by the fact that now phy is enabled earlier, and we are wrongly
trying to force USB host mode on an OTG port. The errors we are
getting are "trying to suspend as a_idle while active".

For ports configured as OTG, we should not need to do anything
to try to force USB host mode on it's OTG port. Trying to force host
mode in this case just seems to completely confuse the musb state
machine.

Let's fix the issue by making musb_host_setup() attempt to force the
mode only if port_mode is configured for host mode.

Fixes: d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: host: xhci-plat: propagate return value of platform_get_irq()
Thomas Petazzoni [Wed, 17 May 2017 15:32:06 +0000 (18:32 +0300)]
usb: host: xhci-plat: propagate return value of platform_get_irq()

platform_get_irq() returns an error code, but the xhci-plat driver
ignores it and always returns -ENODEV. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

CC: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxhci: Fix command ring stop regression in 4.11
Mathias Nyman [Wed, 17 May 2017 15:32:05 +0000 (18:32 +0300)]
xhci: Fix command ring stop regression in 4.11

In 4.11 TRB completion codes were renamed to match spec.

Completion codes for command ring stopped and endpoint stopped
were mixed, leading to failures while handling a stopped command ring.

Use the correct completion code for command ring stopped events.

Fixes: 0b7c105a04ca ("usb: host: xhci: rename completion codes to match spec")
Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxhci: remove GFP_DMA flag from allocation
Matthias Lange [Wed, 17 May 2017 15:32:04 +0000 (18:32 +0300)]
xhci: remove GFP_DMA flag from allocation

There is no reason to restrict allocations to the first 16MB ISA DMA
addresses.

It is causing problems in a virtualization setup with enabled IOMMU
(x86_64). The result is that USB is not working in the VM.

CC: <stable@vger.kernel.org>
Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: xhci: fix lock-inversion problem
Alan Stern [Wed, 17 May 2017 15:32:03 +0000 (18:32 +0300)]
USB: xhci: fix lock-inversion problem

With threaded interrupts, bottom-half handlers are called with
interrupts enabled.  Therefore they can't safely use spin_lock(); they
have to use spin_lock_irqsave().  Lockdep warns about a violation
occurring in xhci_irq():

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
4.11.0-rc8-dbg+ #1 Not tainted
---------------------------------------------------------
swapper/7/0 just changed the state of lock:
 (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>]
ehci_hrtimer_func+0x29/0xc0 [ehci_hcd]
but this lock took another, HARDIRQ-unsafe lock in the past:
 (hcd_urb_list_lock){+.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hcd_urb_list_lock);
                               local_irq_disable();
                               lock(&(&ehci->lock)->rlock);
                               lock(hcd_urb_list_lock);
  <Interrupt>
    lock(&(&ehci->lock)->rlock);
 *** DEADLOCK ***

no locks held by swapper/7/0.
the shortest dependencies between 2nd lock and 1st lock:
 -> (hcd_urb_list_lock){+.....} ops: 252 {
    HARDIRQ-ON-W at:
                      __lock_acquire+0x602/0x1280
                      lock_acquire+0xd5/0x1c0
                      _raw_spin_lock+0x2f/0x40
                      usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore]
                      xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd]
                      finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd]
                      xhci_irq+0xdd6/0x1fa0 [xhci_hcd]
                      usb_hcd_irq+0x26/0x40 [usbcore]
                      irq_forced_thread_fn+0x2f/0x70
                      irq_thread+0x149/0x1d0
                      kthread+0x113/0x150
                      ret_from_fork+0x2e/0x40

This patch fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd
Peter Chen [Wed, 17 May 2017 15:32:02 +0000 (18:32 +0300)]
usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd

According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram

If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled,
        then the assertion of the Interrupt Pending (IP) flag in Figure 30
        generates a PCI Dword write. The IP flag is automatically cleared
        by the completion of the PCI write.

the MSI enabled HCs don't need to clear interrupt pending bit, but
hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role
controller software designs, it sets hcd->irq as 0 to avoid HCD
requesting interrupt, and they want to decide when to call usb_hcd_irq
by software.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: host: xhci-mem: allocate zeroed Scratchpad Buffer
Peter Chen [Wed, 17 May 2017 15:32:01 +0000 (18:32 +0300)]
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer

According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad
Buffer needs to be zeroed.

...
The following operations take place to allocate
        Scratchpad Buffers to the xHC:
...
b. Software clears the Scratchpad Buffer to '0'

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
Mathias Nyman [Wed, 17 May 2017 15:32:00 +0000 (18:32 +0300)]
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton

Intel Denverton microserver is Atom based and need the PME and CAS quirks
as well.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: xhci: trace URB before giving it back instead of after
Mathias Nyman [Wed, 17 May 2017 15:31:59 +0000 (18:31 +0300)]
usb: xhci: trace URB before giving it back instead of after

Don't access any members of a URB after giving it back.
URB might be freed by then already.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: serial: qcserial: add more Lenovo EM74xx device IDs
Bjørn Mork [Wed, 17 May 2017 14:30:50 +0000 (16:30 +0200)]
USB: serial: qcserial: add more Lenovo EM74xx device IDs

In their infinite wisdom, and never ending quest for end user frustration,
Lenovo has decided to use new USB device IDs for the wwan modules in
their 2017 laptops.  The actual hardware is still the Sierra Wireless
EM7455 or EM7430, depending on region.

Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agoUSB: host: xhci: use max-port define
Johan Hovold [Wed, 10 May 2017 16:18:30 +0000 (18:18 +0200)]
USB: host: xhci: use max-port define

Use the new define for the maximum number of SuperSpeed ports instead of
a constant when allocating xHCI root hubs.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: hub: fix SS max number of ports
Johan Hovold [Wed, 10 May 2017 16:18:29 +0000 (18:18 +0200)]
USB: hub: fix SS max number of ports

Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: hub: fix non-SS hub-descriptor handling
Johan Hovold [Wed, 10 May 2017 16:18:28 +0000 (18:18 +0200)]
USB: hub: fix non-SS hub-descriptor handling

Add missing sanity check on the non-SuperSpeed hub-descriptor length in
order to avoid parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes (or a compound-device debug
statement).

Note that we only make sure that the DeviceRemovable field is always
present (and specifically ignore the unused PortPwrCtrlMask field) in
order to continue support any hubs with non-compliant descriptors. As a
further safeguard, the descriptor buffer is also cleared.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: hub: fix SS hub-descriptor handling
Johan Hovold [Wed, 10 May 2017 16:18:27 +0000 (18:18 +0200)]
USB: hub: fix SS hub-descriptor handling

A SuperSpeed hub descriptor does not have any variable-length fields so
bail out when reading a short descriptor.

This avoids parsing and leaking two bytes of uninitialised slab data
through sysfs removable-attributes.

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Cc: stable <stable@vger.kernel.org> # 2.6.39
Cc: John Youn <John.Youn@synopsys.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: usbip: fix nonconforming hub descriptor
Johan Hovold [Wed, 10 May 2017 16:18:26 +0000 (18:18 +0200)]
USB: usbip: fix nonconforming hub descriptor

Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).

Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).

This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).

Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: gadget: dummy_hcd: fix hub-descriptor removable fields
Johan Hovold [Wed, 10 May 2017 16:18:25 +0000 (18:18 +0200)]
USB: gadget: dummy_hcd: fix hub-descriptor removable fields

Flag the first and only port as removable while also leaving the
remaining bits (including the reserved bit zero) unset in accordance
with the specifications:

"Within a byte, if no port exists for a given location, the bit
field representing the port characteristics shall be 0."

Also add a comment marking the legacy PortPwrCtrlMask field.

Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodoc-rst: fixed kernel-doc directives in usb/typec.rst
Markus Heiser [Sat, 13 May 2017 13:49:17 +0000 (15:49 +0200)]
doc-rst: fixed kernel-doc directives in usb/typec.rst

Even if this file is not yet included in any toctree, it is parsed by
Sphinx since it is named '.rst'. This patch fixes the following two
ERRORs from Sphinx build:

Documentation/usb/typec.rst:116: ERROR: Error in "kernel-doc" directive:
invalid option block.

.. kernel-doc:: drivers/usb/typec/typec.c
   :functions: typec_register_cable typec_unregister_cable typec_register_plug
   typec_unregister_plug

Documentation/usb/typec.rst:139: ERROR: Error in "kernel-doc" directive:
invalid option block.

.. kernel-doc:: drivers/usb/typec/typec.c
   :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role
   typec_set_pwr_opmode

Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: core: of: document reference taken by companion helper
Johan Hovold [Tue, 16 May 2017 14:26:14 +0000 (16:26 +0200)]
USB: core: of: document reference taken by companion helper

Document that the new companion-device lookup helper takes a reference
to the companion device which needs to be dropped after use.

Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: ehci-platform: fix companion-device leak
Johan Hovold [Tue, 16 May 2017 14:26:13 +0000 (16:26 +0200)]
USB: ehci-platform: fix companion-device leak

Make sure do drop the reference taken to the companion device during
resume.

Fixes: d4d75128b8fd ("usb: host: ehci-platform: fix usb 1.1 device is not connected in system resume")
Cc: stable <stable@vger.kernel.org> # 4.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: r8a66597-hcd: select a different endpoint on timeout
Chris Brandt [Thu, 27 Apr 2017 19:12:02 +0000 (12:12 -0700)]
usb: r8a66597-hcd: select a different endpoint on timeout

If multiple endpoints on a single device have pending IN URBs and one
endpoint times out due to NAKs (perfectly legal), select a different
endpoint URB to try.
The existing code only checked to see another device address has pending
URBs and ignores other IN endpoints on the current device address. This
leads to endpoints never getting serviced if one endpoint is using NAK as
a flow control method.

Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: r8a66597-hcd: decrease timeout
Chris Brandt [Thu, 27 Apr 2017 19:12:49 +0000 (12:12 -0700)]
usb: r8a66597-hcd: decrease timeout

The timeout for BULK packets was 300ms which is a long time if other
endpoints or devices are waiting for their turn. Changing it to 50ms
greatly increased the overall performance for multi-endpoint devices.

Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: core: fix potential memory leak in error path during hcd creation
Anton Bondarenko [Sat, 6 May 2017 23:53:46 +0000 (01:53 +0200)]
usb: core: fix potential memory leak in error path during hcd creation

Free memory allocated for address0_mutex if allocation of bandwidth_mutex
failed.

Fixes: feb26ac31a2a ("usb: core: hub: hub_port_init lock controller instead of bus")
Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: iowarrior: fix info ioctl on big-endian hosts
Johan Hovold [Thu, 11 May 2017 09:36:02 +0000 (11:36 +0200)]
USB: iowarrior: fix info ioctl on big-endian hosts

Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.

Found using sparse:

warning: cast to restricted __le16

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: chaoskey: fix Alea quirk on big-endian hosts
Johan Hovold [Thu, 11 May 2017 09:36:01 +0000 (11:36 +0200)]
USB: chaoskey: fix Alea quirk on big-endian hosts

Add missing endianness conversion when applying the Alea timeout quirk.

Found using sparse:

warning: restricted __le16 degrades to integer

Fixes: e4a886e811cd ("hwrng: chaoskey - Fix URB warning due to timeout on Alea")
Cc: stable <stable@vger.kernel.org> # 4.8
Cc: Bob Ham <bob.ham@collabora.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosisusb_con: fix coccinelle warning
Jiri Slaby [Fri, 12 May 2017 08:06:29 +0000 (10:06 +0200)]
sisusb_con: fix coccinelle warning

After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in
the coccinelle output, we can see:
drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool

Return true instead of 1 in the function returning bool which was
intended to do in d705ff3818 but omitted.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll)
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agouwb: fix device quirk on big-endian hosts
Johan Hovold [Fri, 12 May 2017 10:06:32 +0000 (12:06 +0200)]
uwb: fix device quirk on big-endian hosts

Add missing endianness conversion when using the USB device-descriptor
idProduct field to apply a hardware quirk.

Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Cc: stable <stable@vger.kernel.org> # 2.6.28
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: misc: legousbtower: Fix memory leak
Maksim Salau [Sat, 13 May 2017 20:49:26 +0000 (23:49 +0300)]
usb: misc: legousbtower: Fix memory leak

get_version_reply is not freed if function returns with success.

Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack")
Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: core: replace %p with %pK
Vamsi Krishna Samavedam [Tue, 16 May 2017 12:38:08 +0000 (14:38 +0200)]
USB: core: replace %p with %pK

Format specifier %p can leak kernel addresses while not valuing the
kptr_restrict system settings. When kptr_restrict is set to (1), kernel
pointers printed using the %pK format specifier will be replaced with
Zeros. Debugging Note : &pK prints only Zeros as address. If you need
actual address information, write 0 to kptr_restrict.

echo 0 > /proc/sys/kernel/kptr_restrict

[Found by poking around in a random vendor kernel tree, it would be nice
if someone would actually send these types of patches upstream - gkh]

Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: ene_usb6250: fix DMA to the stack
Alan Stern [Tue, 16 May 2017 15:47:29 +0000 (11:47 -0400)]
USB: ene_usb6250: fix DMA to the stack

The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on
the stack, which doesn't work with vmapped stacks.  This patch fixes
the problem by allocating a separate 512-byte buffer at probe time and
using it for all of the offending I/O operations.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoMerge tag 'fixes-for-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Wed, 17 May 2017 09:18:36 +0000 (11:18 +0200)]
Merge tag 'fixes-for-v4.12-rc2' of git://git./linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.12-rc2

- New device ID for Intel Canonlake CPUs
- fix for Isochronous performance regression on dwc3
- fix for out-of-bounds access on comp_desc on f_fs
- fix for lost events on dwc3 in case of spurious interrupts

5 years agoUSB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs
Andrey Korolyov [Tue, 16 May 2017 20:54:41 +0000 (23:54 +0300)]
USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs

This patch adds support for recognition of ARM-USB-TINY(H) devices which
are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack
and serial console.

By suggestion from Johan Hovold it is possible to replace
ftdi_jtag_quirk with a bit more generic construction. Since all
Olimex-ARM debuggers has exactly two ports, we could safely always use
only second port within the debugger family.

Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agousb: dwc3: keystone: check return value
Pan Bian [Sun, 23 Apr 2017 05:55:13 +0000 (13:55 +0800)]
usb: dwc3: keystone: check return value

Function devm_clk_get() returns an ERR_PTR when it fails. However, in
function kdwc3_probe(), its return value is not checked, which may
result in a bad memory access bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agousb: gadget: f_fs: avoid out of bounds access on comp_desc
William Wu [Tue, 25 Apr 2017 09:45:48 +0000 (17:45 +0800)]
usb: gadget: f_fs: avoid out of bounds access on comp_desc

Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.

I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:

==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
  ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
 >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                       ^
  ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agousb: gadget: gserial: check if console kthread exists
Bogdan Mirea [Sun, 30 Apr 2017 10:21:26 +0000 (13:21 +0300)]
usb: gadget: gserial: check if console kthread exists

Check for bad pointer that may result because of kthread_create failure.
This check is needed since the gserial setup callback function
(gs_console_setup()) is only freeing the info->con_buf in case of
kthread_create failure which will result into bad info->console_thread
pointer.
Without checking info->console_thread pointer validity in the
gserial_console_exit() function, before calling kthread_stop(), the
rmmod will generate Kernel Oops.

Signed-off-by: Bogdan Mirea <Bogdan-Stefan_mirea@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agousb: dwc3: gadget: Prevent losing events in event cache
Thinh Nguyen [Fri, 12 May 2017 00:26:47 +0000 (17:26 -0700)]
usb: dwc3: gadget: Prevent losing events in event cache

The dwc3 driver can overwite its previous events if its top-half IRQ
handler (TH) gets invoked again before processing the events in the
cache. We see this as a hang in the file transfer and the host will
attempt to reset the device. TH gets the event count and deasserts the
interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If
there's a new event coming between reading the event count and interrupt
deassertion, dwc3 will lose previous pending events. More generally, we
will see 0 event count, which should not affect anything.

This shouldn't be possible in the current dwc3 implementation. However,
through testing and reading the PCIe trace, the TH occasionally still
gets invoked one more time after HW interrupt deassertion. (With PCIe
legacy interrupts, TH is called repeatedly as long as the interrupt line
is asserted). We suspect that there is a small detection delay in the
SW.

To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the
events are processed in the bottom-half IRQ handler. If not, return
IRQ_HANDLED and don't process new event.

Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agousb: dwc3: gadget: Fix ISO transfer performance
Roger Quadros [Fri, 21 Apr 2017 12:58:08 +0000 (15:58 +0300)]
usb: dwc3: gadget: Fix ISO transfer performance

Commit 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()")
caused a small change in the way ISO transfer is handled in the case
when XferInProgress event happens on Isoc EP with an active transfer.
This caused a performance degradation of 50%. e.g. using g_webcam on DUT
and luvcview on host the video frame rate dropped from 16fps to 8fps
@high-speed.

Make the ISO transfer handling equivalent to that prior to that commit
to get back the original ISO performance numbers.

Fixes: 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agousb: dwc3: pci: add Intel Cannonlake PCI IDs
Heikki Krogerus [Fri, 1 Apr 2016 14:13:13 +0000 (17:13 +0300)]
usb: dwc3: pci: add Intel Cannonlake PCI IDs

Intel Cannonlake PCH has the same DWC3 than Intel
Sunrisepoint. Add the new IDs to the supported devices.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
5 years agoUSB: serial: io_ti: fix div-by-zero in set_termios
Johan Hovold [Thu, 11 May 2017 09:41:21 +0000 (11:41 +0200)]
USB: serial: io_ti: fix div-by-zero in set_termios

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org> # 2.6.12
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agoUSB: serial: mct_u232: fix big-endian baud-rate handling
Johan Hovold [Thu, 11 May 2017 09:41:20 +0000 (11:41 +0200)]
USB: serial: mct_u232: fix big-endian baud-rate handling

Drop erroneous cpu_to_le32 when setting the baud rate, something which
corrupted the divisor on big-endian hosts.

Found using sparse:

warning: incorrect type in argument 1 (different base types)
    expected unsigned int [unsigned] [usertype] val
    got restricted __le32 [usertype] <noident>

Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap")
Cc: stable <stable@vger.kernel.org> # 2.6.34
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agoUSB: serial: ir-usb: fix big-endian baud-rate debug printk
Johan Hovold [Thu, 11 May 2017 09:41:19 +0000 (11:41 +0200)]
USB: serial: ir-usb: fix big-endian baud-rate debug printk

Add missing endianness conversion when printing the supported baud
rates.

Found using sparse:

warning: restricted __le16 degrades to integer

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agoUSB: serial: ftdi_sio: fix setting latency for unprivileged users
Anthony Mallet [Fri, 5 May 2017 15:30:16 +0000 (17:30 +0200)]
USB: serial: ftdi_sio: fix setting latency for unprivileged users

Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") enables unprivileged users to set the FTDI latency timer,
but there was a logic flaw that skipped sending the corresponding
USB control message to the device.

Specifically, the device latency timer would not be updated until next
open, something which was later also inadvertently broken by commit
c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port
probe").

A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme
low-latency setting") disabled the low-latency mode by default so we now
need this fix to allow unprivileged users to again enable it.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
[johan: amend commit message]
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe").
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agousb: serial: option: add Telit ME910 support
Daniele Palmas [Wed, 3 May 2017 08:28:54 +0000 (10:28 +0200)]
usb: serial: option: add Telit ME910 support

This patch adds support for Telit ME910 PID 0x1100.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
5 years agoLinux 4.12-rc1 v4.12-rc1
Linus Torvalds [Sat, 13 May 2017 20:19:49 +0000 (13:19 -0700)]
Linux 4.12-rc1

5 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 13 May 2017 17:25:05 +0000 (10:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull some more input subsystem updates from Dmitry Torokhov:
 "An updated xpad driver with a few more recognized device IDs, and a
  new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads
  via SPI bus"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cros_ec_keyb - remove extraneous 'const'
  Input: add support for PlayStation 1/2 joypads connected via SPI
  Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
  Input: xpad - sync supported devices with xboxdrv
  Input: xpad - sort supported devices by USB ID

5 years agoMerge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Sat, 13 May 2017 17:23:12 +0000 (10:23 -0700)]
Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:

 - new config option CONFIG_UBIFS_FS_SECURITY

 - minor improvements

 - random fixes

* tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Add debugfs file for tracking PEB state
  ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
  ubifs: Remove unnecessary assignment
  ubifs: Fix cut and paste error on sb type comparisons
  ubi: fastmap: Fix slab corruption
  ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
  ubi: Make mtd parameter readable
  ubi: Fix section mismatch

5 years agoMerge branch 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 13 May 2017 17:20:02 +0000 (10:20 -0700)]
Merge branch 'for-linus-4.12-rc1' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
 "No new stuff, just fixes"

* 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Add missing NR_CPUS include
  um: Fix to call read_initrd after init_bootmem
  um: Include kbuild.h instead of duplicating its macros
  um: Fix PTRACE_POKEUSER on x86_64
  um: Set number of CPUs
  um: Fix _print_addr()

5 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 13 May 2017 16:49:35 +0000 (09:49 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, docs: update memory.stat description with workingset* entries
  mm: vmscan: scan until it finds eligible pages
  mm, thp: copying user pages must schedule on collapse
  dax: fix PMD data corruption when fault races with write
  dax: fix data corruption when fault races with write
  ext4: return to starting transaction in ext4_dax_huge_fault()
  mm: fix data corruption due to stale mmap reads
  dax: prevent invalidation of mapped DAX entries
  Tigran has moved
  mm, vmalloc: fix vmalloc users tracking properly
  mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
  gcov: support GCC 7.1
  mm, vmstat: Remove spurious WARN() during zoneinfo print
  time: delete current_fs_time()
  hwpoison, memcg: forcibly uncharge LRU pages

5 years agomm, docs: update memory.stat description with workingset* entries
Roman Gushchin [Fri, 12 May 2017 22:47:09 +0000 (15:47 -0700)]
mm, docs: update memory.stat description with workingset* entries

Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache
workingset transition") introduced three new entries in memory stat
file:

 - workingset_refault
 - workingset_activate
 - workingset_nodereclaim

This commit adds a corresponding description to the cgroup v2 docs.

Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: vmscan: scan until it finds eligible pages
Minchan Kim [Fri, 12 May 2017 22:47:06 +0000 (15:47 -0700)]
mm: vmscan: scan until it finds eligible pages

Although there are a ton of free swap and anonymous LRU page in elgible
zones, OOM happened.

  balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null),  order=0, oom_score_adj=0
  CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
   oom_kill_process+0x21d/0x3f0
   out_of_memory+0xd8/0x390
   __alloc_pages_slowpath+0xbc1/0xc50
   __alloc_pages_nodemask+0x1a5/0x1c0
   pte_alloc_one+0x20/0x50
   __pte_alloc+0x1e/0x110
   __handle_mm_fault+0x919/0x960
   handle_mm_fault+0x77/0x120
   __do_page_fault+0x27a/0x550
   trace_do_page_fault+0x43/0x150
   do_async_page_fault+0x2c/0x90
   async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:424716 inactive_anon:65314 isolated_anon:0
   active_file:52 inactive_file:46 isolated_file:0
   unevictable:0 dirty:27 writeback:0 unstable:0
   slab_reclaimable:3967 slab_unreclaimable:4125
   mapped:133 shmem:43 pagetables:1674 bounce:0
   free:4637 free_pcp:225 free_cma:0
  Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
  DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 992 992 1952
  DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 959
  Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB
  DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB
  Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB
  378 total pagecache pages
  17 pages in swap cache
  Swap cache stats: add 17325, delete 17302, find 0/27
  Free swap  = 978940kB
  Total swap = 1048572kB
  524157 pages RAM
  0 pages HighMem/MovableOnly
  12629 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned
  [ pid ]   uid  tgid total_vm      rss nr_ptes nr_pmds swapents oom_score_adj name
  [  433]     0   433     4904        5      14       3       82             0 upstart-udev-br
  [  438]     0   438    12371        5      27       3      191         -1000 systemd-udevd

With investigation, skipping page of isolate_lru_pages makes reclaim
void because it returns zero nr_taken easily so LRU shrinking is
effectively nothing and just increases priority aggressively.  Finally,
OOM happens.

The problem is that get_scan_count determines nr_to_scan with eligible
zones so although priority drops to zero, it couldn't reclaim any pages
if the LRU contains mostly ineligible pages.

get_scan_count:

        size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx);
size = size >> sc->priority;

Assumes sc->priority is 0 and LRU list is as follows.

N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H

(Ie, small eligible pages are in the head of LRU but others are
 almost ineligible pages)

In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from
tail of the LRU are not eligible pages.  If get_scan_count counts
skipped pages, it doesn't reclaim any pages remained after scanning 4
pages so it ends up OOM happening.

This patch makes isolate_lru_pages try to scan pages until it encounters
eligible zones's pages.

[akpm@linux-foundation.org: clean up mind-bending `for' statement.  Tweak comment text]
Fixes: 3db65812d688 ("Revert "mm, vmscan: account for skipped pages as a partial scan"")
Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm, thp: copying user pages must schedule on collapse
David Rientjes [Fri, 12 May 2017 22:47:03 +0000 (15:47 -0700)]
mm, thp: copying user pages must schedule on collapse

We have encountered need_resched warnings in __collapse_huge_page_copy()
while doing {clear,copy}_user_highpage() over HPAGE_PMD_NR source pages.

mm->mmap_sem is held for write, but the iteration is well bounded.

Reschedule as needed.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705101426380.109808@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agodax: fix PMD data corruption when fault races with write
Ross Zwisler [Fri, 12 May 2017 22:47:00 +0000 (15:47 -0700)]
dax: fix PMD data corruption when fault races with write

This is based on a patch from Jan Kara that fixed the equivalent race in
the DAX PTE fault path.

Currently DAX PMD read fault can race with write(2) in the following
way:

CPU1 - write(2)                 CPU2 - read fault
                                dax_iomap_pmd_fault()
                                  ->iomap_begin() - sees hole

dax_iomap_rw()
  iomap_apply()
    ->iomap_begin - allocates blocks
    dax_iomap_actor()
      invalidate_inode_pages2_range()
        - there's nothing to invalidate

                                  grab_mapping_entry()
  - we add huge zero page to the radix tree
    and map it to page tables

The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.

Fix the problem by locking exception entry before mapping blocks for the
fault.  That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).

Fixes: 9f141d6ef6258 ("dax: Call ->iomap_begin without entry lock during dax fault")
Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agodax: fix data corruption when fault races with write
Jan Kara [Fri, 12 May 2017 22:46:57 +0000 (15:46 -0700)]
dax: fix data corruption when fault races with write

Currently DAX read fault can race with write(2) in the following way:

CPU1 - write(2) CPU2 - read fault
dax_iomap_pte_fault()
  ->iomap_begin() - sees hole
dax_iomap_rw()
  iomap_apply()
    ->iomap_begin - allocates blocks
    dax_iomap_actor()
      invalidate_inode_pages2_range()
        - there's nothing to invalidate
  grab_mapping_entry()
  - we add zero page in the radix tree
    and map it to page tables

The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.

Fix the problem by locking exception entry before mapping blocks for the
fault.  That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).

Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956
Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoext4: return to starting transaction in ext4_dax_huge_fault()
Jan Kara [Fri, 12 May 2017 22:46:54 +0000 (15:46 -0700)]
ext4: return to starting transaction in ext4_dax_huge_fault()

DAX will return to locking exceptional entry before mapping blocks for a
page fault to fix possible races with concurrent writes.  To avoid lock
inversion between exceptional entry lock and transaction start, start
the transaction already in ext4_dax_huge_fault().

Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956
Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: fix data corruption due to stale mmap reads
Jan Kara [Fri, 12 May 2017 22:46:50 +0000 (15:46 -0700)]
mm: fix data corruption due to stale mmap reads

Currently, we didn't invalidate page tables during invalidate_inode_pages2()
for DAX.  That could result in e.g. 2MiB zero page being mapped into
page tables while there were already underlying blocks allocated and
thus data seen through mmap were different from data seen by read(2).
The following sequence reproduces the problem:

 - open an mmap over a 2MiB hole

 - read from a 2MiB hole, faulting in a 2MiB zero page

 - write to the hole with write(3p). The write succeeds but we
   incorrectly leave the 2MiB zero page mapping intact.

 - via the mmap, read the data that was just written. Since the zero
   page mapping is still intact we read back zeroes instead of the new
   data.

Fix the problem by unconditionally calling invalidate_inode_pages2_range()
in dax_iomap_actor() for new block allocations and by properly
invalidating page tables in invalidate_inode_pages2_range() for DAX
mappings.

Fixes: c6dcf52c23d2d3fb5235cec42d7dd3f786b87d55
Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agodax: prevent invalidation of mapped DAX entries
Ross Zwisler [Fri, 12 May 2017 22:46:47 +0000 (15:46 -0700)]
dax: prevent invalidation of mapped DAX entries

Patch series "mm,dax: Fix data corruption due to mmap inconsistency",
v4.

This series fixes data corruption that can happen for DAX mounts when
page faults race with write(2) and as a result page tables get out of
sync with block mappings in the filesystem and thus data seen through
mmap is different from data seen through read(2).

The series passes testing with t_mmap_stale test program from Ross and
also other mmap related tests on DAX filesystem.

This patch (of 4):

dax_invalidate_mapping_entry() currently removes DAX exceptional entries
only if they are clean and unlocked.  This is done via:

  invalidate_mapping_pages()
    invalidate_exceptional_entry()
      dax_invalidate_mapping_entry()

However, for page cache pages removed in invalidate_mapping_pages()
there is an additional criteria which is that the page must not be
mapped.  This is noted in the comments above invalidate_mapping_pages()
and is checked in invalidate_inode_page().

For DAX entries this means that we can can end up in a situation where a
DAX exceptional entry, either a huge zero page or a regular DAX entry,
could end up mapped but without an associated radix tree entry.  This is
inconsistent with the rest of the DAX code and with what happens in the
page cache case.

We aren't able to unmap the DAX exceptional entry because according to
its comments invalidate_mapping_pages() isn't allowed to block, and
unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem.

Since we essentially never have unmapped DAX entries to evict from the
radix tree, just remove dax_invalidate_mapping_entry().

Fixes: c6dcf52c23d2 ("mm: Invalidate DAX radix tree entries only if appropriate")
Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.cz
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org> [4.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoTigran has moved
Andrew Morton [Fri, 12 May 2017 22:46:44 +0000 (15:46 -0700)]
Tigran has moved

Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm, vmalloc: fix vmalloc users tracking properly
Michal Hocko [Fri, 12 May 2017 22:46:41 +0000 (15:46 -0700)]
mm, vmalloc: fix vmalloc users tracking properly

Commit 1f5307b1e094 ("mm, vmalloc: properly track vmalloc users") has
pulled asm/pgtable.h include dependency to linux/vmalloc.h and that
turned out to be a bad idea for some architectures.  E.g.  m68k fails
with

   In file included from arch/m68k/include/asm/pgtable_mm.h:145:0,
                    from arch/m68k/include/asm/pgtable.h:4,
                    from include/linux/vmalloc.h:9,
                    from arch/m68k/kernel/module.c:9:
   arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page':
>> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function)
    #define pgd_offset_k(address) pgd_offset(&init_mm, address)

as spotted by kernel build bot. nios2 fails for other reason

  In file included from include/asm-generic/io.h:767:0,
                   from arch/nios2/include/asm/io.h:61,
                   from include/linux/io.h:25,
                   from arch/nios2/include/asm/pgtable.h:18,
                   from include/linux/mm.h:70,
                   from include/linux/pid_namespace.h:6,
                   from include/linux/ptrace.h:9,
                   from arch/nios2/include/uapi/asm/elf.h:23,
                   from arch/nios2/include/asm/elf.h:22,
                   from include/linux/elf.h:4,
                   from include/linux/module.h:15,
                   from init/main.c:16:
  include/linux/vmalloc.h: In function '__vmalloc_node_flags':
  include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'?

which is due to the newly added #include <asm/pgtable.h>, which on nios2
includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which
again includes <linux/vmalloc.h>.

Tweaking that around just turns out a bigger headache than necessary.
This patch reverts 1f5307b1e094 and reimplements the original fix in a
different way.  __vmalloc_node_flags can stay static inline which will
cover vmalloc* functions.  We only have one external user
(kvmalloc_node) and we can export __vmalloc_node_flags_caller and
provide the caller directly.  This is much simpler and it doesn't really
need any games with header files.

[akpm@linux-foundation.org: coding-style fixes]
[mhocko@kernel.org: revert old comment]
Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz
Fixes: 1f5307b1e094 ("mm, vmalloc: properly track vmalloc users")
Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
SeongJae Park [Fri, 12 May 2017 22:46:38 +0000 (15:46 -0700)]
mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin

One return case of `__collapse_huge_page_swapin()` does not invoke
tracepoint while every other return case does.  This commit adds a
tracepoint invocation for the case.

Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agogcov: support GCC 7.1
Martin Liska [Fri, 12 May 2017 22:46:35 +0000 (15:46 -0700)]
gcov: support GCC 7.1

Starting from GCC 7.1, __gcov_exit is a new symbol expected to be
implemented in a profiling runtime.

[akpm@linux-foundation.org: coding-style fixes]
[mliska@suse.cz: v2]
Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz
Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm, vmstat: Remove spurious WARN() during zoneinfo print
Reza Arbab [Fri, 12 May 2017 22:46:32 +0000 (15:46 -0700)]
mm, vmstat: Remove spurious WARN() during zoneinfo print

After commit e2ecc8a79ed4 ("mm, vmstat: print non-populated zones in
zoneinfo"), /proc/zoneinfo will show unpopulated zones.

A memoryless node, having no populated zones at all, was previously
ignored, but will now trigger the WARN() in is_zone_first_populated().

Remove this warning, as its only purpose was to warn of a situation that
has since been enabled.

Aside: The "per-node stats" are still printed under the first populated
zone, but that's not necessarily the first stanza any more.  I'm not
sure which criteria is more important with regard to not breaking
parsers, but it looks a little weird to the eye.

Fixes: e2ecc8a79ed4 ("mm, vmstat: print node-based stats in zoneinfo file")
Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agotime: delete current_fs_time()
Deepa Dinamani [Fri, 12 May 2017 22:46:29 +0000 (15:46 -0700)]
time: delete current_fs_time()

All uses of the current_fs_time() function have been replaced by other
time interfaces.

And, its use cases can be fulfilled by current_time() or ktime_get_*
variants.

Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agohwpoison, memcg: forcibly uncharge LRU pages
Michal Hocko [Fri, 12 May 2017 22:46:26 +0000 (15:46 -0700)]
hwpoison, memcg: forcibly uncharge LRU pages

Laurent Dufour has noticed that hwpoinsoned pages are kept charged.  In
his particular case he has hit a bad_page("page still charged to
cgroup") when onlining a hwpoison page.  While this looks like something
that shouldn't happen in the first place because onlining hwpages and
returning them to the page allocator makes only little sense it shows a
real problem.

hwpoison pages do not get freed usually so we do not uncharge them (at
least not since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge
API")).  Each charge pins memcg (since e8ea14cc6ead ("mm: memcontrol:
take a css reference for each charged page")) as well and so the
mem_cgroup and the associated state will never go away.  Fix this leak
by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache().
We also have to tweak uncharge_list because it cannot rely on zero ref
count for these pages.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API")
Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Fri, 12 May 2017 22:43:10 +0000 (15:43 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "Incremental fixes and a small feature addition on top of the main
  libnvdimm 4.12 pull request:

   - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
     The size regression is fixed by moving all dax helpers into the
     dax-core and only specifying "select DAX" for FS_DAX and
     dax-capable drivers. He also asked for clarification of the
     NR_DEV_DAX config option which, on closer look, does not need to be
     a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
     for good measure.

   - Ben's attention to detail on -stable patch submissions caught a
     case where the recent fixes to arch_copy_from_iter_pmem() missed a
     condition where we strand dirty data in the cache. This is tagged
     for -stable and will also be included in the rework of the pmem api
     to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.

   - Vishal adds a feature that missed the initial pull due to pending
     review feedback. It allows the kernel to clear media errors when
     initializing a BTT (atomic sector update driver) instance on a pmem
     namespace.

   - Ross noticed that the dax_device + dax_operations conversion broke
     __dax_zero_page_range(). The nvdimm unit tests fail to check this
     path, but xfstests immediately trips over it. No excuse for missing
     this before submitting the 4.12 pull request.

  These all pass the nvdimm unit tests and an xfstests spot check. The
  set has received a build success notification from the kbuild robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  filesystem-dax: fix broken __dax_zero_page_range() conversion
  libnvdimm, btt: ensure that initializing metadata clears poison
  libnvdimm: add an atomic vs process context flag to rw_bytes
  x86, pmem: Fix cache flushing for iovec write < 8 bytes
  device-dax: kill NR_DEV_DAX
  block, dax: move "select DAX" from BLOCK to FS_DAX
  device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX

5 years agoMerge tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 12 May 2017 19:10:38 +0000 (12:10 -0700)]
Merge tag 'sound-fix-4.12-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This contains a one-liner change that has a significant impact:
  disabling the build of OSS. It's been unmaintained for long time, and
  we'd like to drop the stuff. Finally, as the first step, stop the
  build. Let's see whether it works without much complaints.

  Other than that, there are two small fixes for HD-audio"

* tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  sound: Disable the build of OSS drivers
  ALSA: hda: Fix cpu lockup when stopping the cmd dmas
  ALSA: hda - Add mute led support for HP EliteBook 840 G3

5 years agoMerge tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux...
Linus Torvalds [Fri, 12 May 2017 19:02:21 +0000 (12:02 -0700)]
Merge tag 'for-v4.12-2' of git://git./linux/kernel/git/sre/linux-power-supply

Pull more power-supply updates from Sebastian Reichel:
 "The power-supply subsystem has a few more changes for the v4.12 merge
  window:

   - New battery driver for AXP20X and AXP22X PMICs

   - Improve max17042_battery for usage on x86

   - Misc small cleanups & fixes"

* tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits)
  power: supply: cpcap-charger: Keep trickle charger bits disabled
  power: supply: cpcap-charger: Fix enable for 3.8V charge setting
  power: supply: cpcap-charger: Fix charge voltage configuration
  power: supply: cpcap-charger: Fix charger name
  power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static
  power: supply: sbs-battery: Add alert callback
  mailmap: add Sebastian Reichel
  power: supply: avoid unused twl4030-madc.h
  power: supply: sbs-battery: Correct supply status with current draw
  power: supply: sbs-battery: Don't ignore the first external power change
  power: supply: pda_power: move from timer to delayed_work
  power: supply: max17042_battery: Add support for the SCOPE property
  power: supply: max17042_battery: Add support for the CHARGE_NOW property
  power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property
  power: supply: max17042_battery: mAh readings depend on r_sns value
  power: supply: max17042_battery: Add support for the VOLT_MIN property
  power: supply: max17042_battery: Add support for the TECHNOLOGY attribute
  power: supply: max17042_battery: Add external_power_changed callback
  power: supply: max17042_battery: Add support for the STATUS property
  power: supply: max17042_battery: Add default platform_data fallback data
  ...

5 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Linus Torvalds [Fri, 12 May 2017 18:58:45 +0000 (11:58 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Fix a problem where orderly_shutdown() is called for multiple times
   due to multiple critical overheating events raised in a short period
   by platform thermal driver. (Keerthy)

 - Introduce a backup thermal shutdown mechanism, which invokes
   kernel_power_off()/emergency_restart() directly, after
   orderly_shutdown() being issued for certain amount of time(specified
   via Kconfig). This is useful in certain conditions that userspace may
   be unable to power off the system in a clean manner and leaves the
   system in a critical state, like in the middle of driver probing
   phase. (Keerthy)

 - Introduce a new interface in thermal devfreq_cooling code so that the
   driver can provide more precise data regarding actual power to the
   thermal governor every time the power budget is calculated. (Lukasz
   Luba)

 - Introduce BCM 2835 soc thermal driver and northstar thermal driver,
   within a new sub-folder. (Rafał Miłecki)

 - Introduce DA9062/61 thermal driver. (Steve Twiss)

 - Remove non-DT booting on TI-SoC driver. Also add support to fetching
   coefficients from DT. (Keerthy)

 - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund)

 - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien,
   Brian Bian)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  thermal: core: Add a back up thermal shutdown mechanism
  thermal: core: Allow orderly_poweroff to be called only once
  Thermal: Intel SoC DTS: Change interrupt request behavior
  trace: thermal: add another parameter 'power' to the tracing function
  thermal: devfreq_cooling: add new interface for direct power read
  thermal: devfreq_cooling: refactor code and add get_voltage function
  thermal: mt8173: minor mtk_thermal.c cleanups
  thermal: bcm2835: move to the broadcom subdirectory
  thermal: broadcom: ns: specify myself as MODULE_AUTHOR
  thermal: da9062/61: Thermal junction temperature monitoring driver
  Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding
  thermal: broadcom: add Northstar thermal driver
  dt-bindings: thermal: add support for Broadcom's Northstar thermal
  thermal: bcm2835: add thermal driver for bcm2835 SoC
  dt-bindings: Add thermal zone to bcm2835-thermal example
  thermal: rcar_gen3_thermal: add suspend and resume support
  thermal: rcar_gen3_thermal: store device match data in private structure
  thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
  thermal: rcar_gen3_thermal: record and check number of TSCs found
  thermal: rcar_gen3_thermal: check that TSC exists before memory allocation
  ...

5 years agoMerge tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 12 May 2017 18:48:26 +0000 (11:48 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "AMD, nouveau, one i915, and one EDID fix for v4.12-rc1

  Some fixes that it would be good to have in rc1. It contains the i915
  quiet fix that you reported.

  It also has an amdgpu fixes pull, with lots of ongoing work on Vega10
  which is new in this kernel and is preliminary support so may have a
  fair bit of movement.

  Otherwise a few non-Vega10 AMD fixes, one EDID fix and some nouveau
  regression fixers"

* tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux: (144 commits)
  drm/i915: Make vblank evade warnings optional
  drm/nouveau/therm: remove ineffective workarounds for alarm bugs
  drm/nouveau/tmr: avoid processing completed alarms when adding a new one
  drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
  drm/nouveau/tmr: handle races with hw when updating the next alarm time
  drm/nouveau/tmr: ack interrupt before processing alarms
  drm/nouveau/core: fix static checker warning
  drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
  drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
  drm/nouveau/kms/nv50: fix source-rect-only plane updates
  drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
  drm/amd/powerplay: refine pwm1_enable callback functions for CI.
  drm/amd/powerplay: refine pwm1_enable callback functions for vi.
  drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
  drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
  drm/amdgpu: add amd fan ctrl mode enums.
  drm/amd/powerplay: add more smu message on Vega10.
  drm/amdgpu: fix dependency issue
  drm/amd: fix init order of sched job
  drm/amdgpu: add some additional vega10 pci ids
  ...

5 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Fri, 12 May 2017 18:44:13 +0000 (11:44 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/nab/target-pending

Pull SCSI target updates from Nicholas Bellinger:
 "Things were a lot more calm than previously expected. It's primarily
  fixes in various areas, with most of the new functionality centering
  around TCMU backend driver work that Xiubo Li has been driving.

  Here's the summary on the feature side:

   - Make T10-PI verify configurable for emulated (FILEIO + RD) backends
    (Dmitry Monakhov)
   - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic
    (Bryant Ly + MNC)
   - Add TCMU support for growing ring buffer size (Xiubo Li + MNC)
   - Add TCMU support for global block data pool (Xiubo Li + MNC)

  and on the bug-fix side:

   - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase
    failures (Gary Guo + nab)
   - Fix iscsi-target hang with explicitly changing per NodeACL
    CmdSN number depth with concurrent login driven session
    reinstatement.  (Gary Guo + nab)
   - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly)
   - Fix target-core/FILEIO zero length handling (Bart Van Assche)

  Also, there was an OOPs introduced with the WRITE_VERIFY changes that
  I ended up reverting at the last minute, because as not unusual Bart
  and I could not agree on the fix in time for -rc1. Since it's specific
  to a conformance test, it's been reverted for now.

  There is a separate patch in the queue to address the underlying
  control CDB write overflow regression in >= v4.3 separate from the
  WRITE_VERIFY revert here, that will be pushed post -rc1"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits)
  Revert "target: Fix VERIFY and WRITE VERIFY command parsing"
  IB/srpt: Avoid that aborting a command triggers a kernel warning
  IB/srpt: Fix abort handling
  target/fileio: Fix zero-length READ and WRITE handling
  ibmvscsis: Do not send aborted task response
  tcmu: fix module removal due to stuck thread
  target: Don't force session reset if queue_depth does not change
  iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
  target: Fix compare_and_write_callback handling for non GOOD status
  tcmu: Recalculate the tcmu_cmd size to save cmd area memories
  tcmu: Add global data block pool support
  tcmu: Add dynamic growing data area feature support
  target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store()
  target: fixup error message in target_tg_pt_gp_alua_access_type_store()
  target/user: PGR Support
  target: Add WRITE_VERIFY_16
  Documentation/target: add an example script to configure an iSCSI target
  target: Use kmalloc_array() in transport_kmap_data_sg()
  target: Use kmalloc_array() in compare_and_write_callback()
  target: Improve size determinations in two functions
  ...

5 years agoMerge branch 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 12 May 2017 18:39:59 +0000 (11:39 -0700)]
Merge branch 'work.sane_pwd' of git://git./linux/kernel/git/viro/vfs

Pull misc vfs updates from Al Viro:
 "Making sure that something like a referral point won't end up as pwd
  or root.

  The main part is the last commit (fixing mntns_install()); that one
  fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
  bit more robust - it should be impossible to get opened files (even
  O_PATH ones) for referral points in the first place, so the existing
  checks are OK, but checking the same thing as in chdir(2) is just as
  cheap.

  The path_init() commit removes a redundant check that shouldn't have
  been there in the first place"

* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that mntns_install() doesn't end up with referral for root
  path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
  make sure that fchdir() won't accept referral points, etc.

5 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 May 2017 17:45:36 +0000 (10:45 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates/fixes from Ingo Molnar:
 "Mostly tooling updates, but also two kernel fixes: a call chain
  handling robustness fix and an x86 PMU driver event definition fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/callchain: Force USER_DS when invoking perf_callchain_user()
  tools build: Fixup sched_getcpu feature test
  perf tests kmod-path: Don't fail if compressed modules aren't supported
  perf annotate: Fix AArch64 comment char
  perf tools: Fix spelling mistakes
  perf/x86: Fix Broadwell-EP DRAM RAPL events
  perf config: Refactor a duplicated code for obtaining config file name
  perf symbols: Allow user probes on versioned symbols
  perf symbols: Accept symbols starting at address 0
  tools lib string: Adopt prefixcmp() from perf and subcmd
  perf units: Move parse_tag_value() to units.[ch]
  perf ui gtk: Move gtk .so name to the only place where it is used
  perf tools: Move HAS_BOOL define to where perl headers are used
  perf memswap: Split the byteswap memory range wrappers from util.[ch]
  perf tools: Move event prototypes from util.h to event.h
  perf buildid: Move prototypes from util.h to build-id.h

5 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 May 2017 17:43:25 +0000 (10:43 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Ingo Molnar:
 "A single ARM Juno clocksource driver fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/arm_arch_timer: Fix arch_timer_mem_find_best_frame()

5 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 May 2017 17:41:45 +0000 (10:41 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull stackprotector fixlet from Ingo Molnar:
 "A single fix/enhancement to increase stackprotector canary randomness
  on 64-bit kernels with very little cost"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms

5 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 May 2017 17:11:50 +0000 (10:11 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - two boot crash fixes
   - unwinder fixes
   - kexec related kernel direct mappings enhancements/fixes
   - more Clang support quirks
   - minor cleanups
   - Documentation fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Fix a typo in Documentation
  x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
  x86/boot/32: Fix UP boot on Quark and possibly other platforms
  x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
  x86/kexec/64: Use gbpages for identity mappings if available
  x86/mm: Add support for gbpages to kernel_ident_mapping_init()
  x86/boot: Declare error() as noreturn
  x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
  x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
  x86/microcode/AMD: Remove redundant NULL check on mc

5 years agoMerge tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 May 2017 17:09:14 +0000 (10:09 -0700)]
Merge tag 'for-linus-4.12b-rc0c-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "This contains two fixes for booting under Xen introduced during this
  merge window and two fixes for older problems, where one is just much
  more probable due to another merge window change"

* tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: adjust early dom0 p2m handling to xen hypervisor behavior
  x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
  xen/x86: Do not call xen_init_time_ops() until shared_info is initialized
  x86/xen: fix xsave capability setting

5 years agoMerge tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 12 May 2017 17:04:09 +0000 (10:04 -0700)]
Merge tag 'powerpc-4.12-2' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "The change to the Linux page table geometry was delayed for more
  testing with 16G pages, and there's the new CPU features stuff which
  just needed one more polish before going in. Plus a few changes from
  Scott which came in a bit late. And then various fixes, mostly minor.

  Summary highlights:

   - rework the Linux page table geometry to lower memory usage on
     64-bit Book3S (IBM chips) using the Hash MMU.

   - support for a new device tree binding for discovering CPU features
     on future firmwares.

   - Freescale updates from Scott:
      "Includes a fix for a powerpc/next mm regression on 64e, a fix for
       a kernel hang on 64e when using a debugger inside a relocated
       kernel, a qman fix, and misc qe improvements."

  Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
  Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"

* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Support new device tree binding for discovering CPU features
  powerpc: Don't print cpu_spec->cpu_name if it's NULL
  of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
  powerpc/64s: Fix unnecessary machine check handler relocation branch
  powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
  powerpc: Fix distclean with Makefile.postlink
  powerpc/64e: Don't place the stack beyond TASK_SIZE
  powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
  powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
  soc/fsl/qbman: Disable IRQs for deferred QBMan work
  soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
  soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
  soc/fsl/qe: round brg_freq to 1kHz granularity
  soc/fsl/qe: get rid of immrbar_virt_to_phys()
  net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
  powerpc/64e: Fix hang when debugging programs with relocated kernel

5 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Fri, 12 May 2017 16:56:30 +0000 (09:56 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS updates from James Hogan:
 "math-emu:
   - Add missing clearing of BLTZALL and BGEZALL emulation counters
   - Fix BC1EQZ and BC1NEZ condition handling
   - Fix BLEZL and BGTZL identification

  BPF:
   - Add JIT support for SKF_AD_HATYPE
   - Use unsigned access for unsigned SKB fields
   - Quit clobbering callee saved registers in JIT code
   - Fix multiple problems in JIT skb access helpers

  Loongson 3:
   - Select MIPS_L1_CACHE_SHIFT_6

  Octeon:
   - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL
   - Remove unused L2C types and macros.
   - Remove unused SLI types and macros.
   - Fix compile error when USB is not enabled.
   - Octeon: Remove unused PCIERCX types and macros.
   - Octeon: Clean up platform code.

  SNI:
   - Remove recursive include of cpu-feature-overrides.h

  Sibyte:
   - Export symbol periph_rev to sb1250-mac network driver.
   - Fix Kconfig warning.

  Generic platform:
   - Enable Root FS on NFS in generic_defconfig

  SMP-MT:
   - Use CPU interrupt controller IPI IRQ domain support

  UASM:
   - Add support for LHU for uasm.
   - Remove needless ISA abstraction

  mm:
   - Add 48-bit VA space and 4-level page tables for 4K pages.

  PCI:
   - Add controllers before the specified head

  irqchip driver for MIPS CPU:
   - Replace magic 0x100 with IE_SW0
   - Prepare for non-legacy IRQ domains
   - Introduce IPI IRQ domain support

  MAINTAINERS:
   - Update email-id of Rahul Bedarkar

  NET:
   - sb1250-mac: Add missing MODULE_LICENSE()

  CPUFREQ:
   - Loongson2: drop set_cpus_allowed_ptr()

  Misc:
   - Disable Werror when W= is set
   - Opt into HAVE_COPY_THREAD_TLS
   - Enable GENERIC_CPU_AUTOPROBE
   - Use common outgoing-CPU-notification code
   - Remove dead define of ST_OFF
   - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
   - Stengthen IPI IRQ domain sanity check
   - Remove confusing else statement in __do_page_fault()
   - Don't unnecessarily include kmalloc.h into <asm/cache.h>.
   - Delete unused definition of SMP_CACHE_SHIFT.
   - Delete redundant definition of SMP_CACHE_BYTES"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits)
  MIPS: Sibyte: Fix Kconfig warning.
  MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver.
  NET: sb1250-mac: Add missing MODULE_LICENSE()
  MAINTAINERS: Update email-id of Rahul Bedarkar
  MIPS: Remove confusing else statement in __do_page_fault()
  MIPS: Stengthen IPI IRQ domain sanity check
  MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
  irqchip: mips-cpu: Introduce IPI IRQ domain support
  irqchip: mips-cpu: Prepare for non-legacy IRQ domains
  irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
  MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
  MIPS: generic: Enable Root FS on NFS in generic_defconfig
  MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h
  MIPS: Opt into HAVE_COPY_THREAD_TLS
  CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()
  MIPS: uasm: Remove needless ISA abstraction
  MIPS: Remove dead define of ST_OFF
  MIPS: Use common outgoing-CPU-notification code
  MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling
  MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
  ...

5 years agoMerge tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan...
Linus Torvalds [Fri, 12 May 2017 16:53:16 +0000 (09:53 -0700)]
Merge tag 'nios2-v4.12-rc1' of git://git./linux/kernel/git/lftan/nios2

Pull nios2 updates from Ley Foon Tan:
 "nios2 fixes/enhancements and adding nios2 R2 support"

* tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: remove custom early console implementation
  nios2: use generic strncpy_from_user() and strnlen_user()
  nios2: Add CDX support
  nios2: Add BMX support
  nios2: Add NIOS2_ARCH_REVISION to select between R1 and R2
  nios2: implement flush_dcache_mmap_lock/unlock
  nios2: enable earlycon support
  nios2: constify irq_domain_ops
  nios2: remove wrapper header for cmpxchg.h
  nios2: add .gitignore entries for auto-generated files

5 years agosound: Disable the build of OSS drivers
Takashi Iwai [Thu, 11 May 2017 09:14:45 +0000 (11:14 +0200)]
sound: Disable the build of OSS drivers

OSS drivers are left as badly unmaintained, and now we're facing a
problem to clean up the hackish set_fs() usage in their codes.  Since
most of drivers have been covered by ALSA, and the others are dead old
and inactive, let's leave them RIP.

This patch is the first step: disable the build of OSS drivers.
We'll eventually drop the whole codes and clean up later.

Note that sound/oss/dmasound is still kept, since it's a completely
different implementation of OSS, and it doesn't suffer from set_fs()
hack.  Moreover, the build of ALSA is disabled on M68K by some reason,
thus disabling it shall result in a regression.  This one will be
disabled / removed once when we add the support in ALSA side.

Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agodrm/i915: Make vblank evade warnings optional
Ville Syrjälä [Sun, 7 May 2017 17:12:52 +0000 (20:12 +0300)]
drm/i915: Make vblank evade warnings optional

Add a new Kconfig option to enable/disable the extra warnings
from the vblank evade code. For now we'll keep the warning
about an actually missed vblank always enabled as that can have
an actual user visible impact. But if we miss the deadline
othrwise there's no real need to bother the user with that.
We'll want these warnings enabled during development however
so that we can catch regressions.

Based on the reports it looks like this is still very easy
to hit on SKL, so we have more work ahead of us to optimize
the crtiical section further.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: e1edbd44e23b ("drm/i915: Complain if we take too long under vblank evasion.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
5 years agoMerge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next
Dave Airlie [Fri, 12 May 2017 04:25:22 +0000 (14:25 +1000)]
Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next

Quite a few patches, but not much code changed:
- Fixes regression from atomic when only the source rect of a plane
changes (ie. xrandr --right-of)
- Fixes another issue where atomic changed behaviour underneath us,
potentially causing laggy cursor position updates
- Fixes for a bunch of races in thermal code, which lead to random
lockups for a lot of users

* 'linux-4.12' of git://github.com/skeggsb/linux:
  drm/nouveau/therm: remove ineffective workarounds for alarm bugs
  drm/nouveau/tmr: avoid processing completed alarms when adding a new one
  drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
  drm/nouveau/tmr: handle races with hw when updating the next alarm time
  drm/nouveau/tmr: ack interrupt before processing alarms
  drm/nouveau/core: fix static checker warning
  drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
  drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
  drm/nouveau/kms/nv50: fix source-rect-only plane updates
  drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()

5 years agoMerge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Fri, 12 May 2017 03:58:29 +0000 (13:58 +1000)]
Merge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for 4.12.  This is a bit bigger than usual since it's 3 weeks
worth of fixes and most of these changes are for vega10 which is
new for 4.12 and still in a fair amount of flux.  It looks like
you missed my last pull request, so those patches are included here
as well.  Highlights:
- Lots of vega10 fixes
- Fix interruptable wait mixup
- Fan control method fixes
- Misc display fixes for radeon and amdgpu
- Misc bug fixes

* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits)
  drm/amd/powerplay: refine pwm1_enable callback functions for CI.
  drm/amd/powerplay: refine pwm1_enable callback functions for vi.
  drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
  drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
  drm/amdgpu: add amd fan ctrl mode enums.
  drm/amd/powerplay: add more smu message on Vega10.
  drm/amdgpu: fix dependency issue
  drm/amd: fix init order of sched job
  drm/amdgpu: add some additional vega10 pci ids
  drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset
  drm/amdgpu/atomfirmware: add function to update engine hang status
  drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty
  drm/amdgpu: fix mutex list null pointer reference
  drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.
  drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum.
  drm/amd/powerplay: delete dead code in powerplay.
  drm/amdgpu: Use less generic enum definitions
  drm/amdgpu/gfx9: derive tile pipes from golden settings
  drm/amdgpu/gfx: drop max_gs_waves_per_vgt
  drm/amd/powerplay: disable engine spread spectrum feature on Vega10.
  ...

5 years agoMerge tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm...
Dave Airlie [Fri, 12 May 2017 03:57:20 +0000 (13:57 +1000)]
Merge tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Core Changes:
- Add quirk for LGD 764 panel to default 10bpc (Mario)

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
* tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc:
  drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2

5 years agoInput: cros_ec_keyb - remove extraneous 'const'
Arnd Bergmann [Thu, 11 May 2017 17:14:06 +0000 (10:14 -0700)]
Input: cros_ec_keyb - remove extraneous 'const'

gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains
a 'const' keyword:

drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);

This removes the extra one.

Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
5 years agodrm/nouveau/therm: remove ineffective workarounds for alarm bugs
Ben Skeggs [Thu, 11 May 2017 07:33:39 +0000 (17:33 +1000)]
drm/nouveau/therm: remove ineffective workarounds for alarm bugs

These were ineffective due to touching the list without the alarm lock,
but should no longer be required.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
5 years agodrm/nouveau/tmr: avoid processing completed alarms when adding a new one
Ben Skeggs [Thu, 11 May 2017 07:13:29 +0000 (17:13 +1000)]
drm/nouveau/tmr: avoid processing completed alarms when adding a new one

The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm.  This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).

Turns out, it's not so difficult after all.  Go figure ;)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
5 years agodrm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
Ben Skeggs [Thu, 11 May 2017 07:03:05 +0000 (17:03 +1000)]
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm

At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.

Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
5 years agodrm/nouveau/tmr: handle races with hw when updating the next alarm time
Ben Skeggs [Thu, 11 May 2017 07:19:48 +0000 (17:19 +1000)]
drm/nouveau/tmr: handle races with hw when updating the next alarm time

If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.

Fix this by checking again after we update HW.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
5 years agodrm/nouveau/tmr: ack interrupt before processing alarms
Ben Skeggs [Thu, 11 May 2017 06:53:42 +0000 (16:53 +1000)]
drm/nouveau/tmr: ack interrupt before processing alarms

Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
5 years agodrm/nouveau/core: fix static checker warning
Ben Skeggs [Thu, 4 May 2017 07:29:03 +0000 (17:29 +1000)]
drm/nouveau/core: fix static checker warning

object->engine cannot be NULL, it's either valid, or an error pointer.

This particular condition shouldn't actually be possible, but just in
case, we'll keep it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
5 years agodrm/nouveau/fb/ram/gf100-: remove 0x10f200 read
Ben Skeggs [Tue, 28 Mar 2017 01:46:37 +0000 (11:46 +1000)]
drm/nouveau/fb/ram/gf100-: remove 0x10f200 read

This reg has moved on Pascal, and causes a bus fault.

We never use the value anyway, so just remove the read.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
5 years agodrm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
Ben Skeggs [Mon, 1 May 2017 06:53:40 +0000 (16:53 +1000)]
drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes

The DRM core used to only call prepare_fb/cleanup_fb() when a plane's
framebuffer changed, which achieved the desired effect.

It's apparently now up to the driver to decide on its own.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.11+]
5 years agodrm/nouveau/kms/nv50: fix source-rect-only plane updates
Ben Skeggs [Mon, 1 May 2017 06:52:03 +0000 (16:52 +1000)]
drm/nouveau/kms/nv50: fix source-rect-only plane updates

This "optimisation" (which was originally meant to skip updating cursor
settings in the core channel on position-only updates) turned out to be
pointless in the final design of the code before it was merged.

Remove it completely, as it breaks other cases.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.10+]
5 years agodrm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
Ben Skeggs [Mon, 1 May 2017 06:59:29 +0000 (16:59 +1000)]
drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
5 years agoMerge tag 'docs-4.12-2' of git://git.lwn.net/linux
Linus Torvalds [Thu, 11 May 2017 18:29:52 +0000 (11:29 -0700)]
Merge tag 'docs-4.12-2' of git://git.lwn.net/linux

Pull more documentation updates from Jonathan Corbet:
 "Connect the newly RST-formatted documentation to the rest; this had to
  wait until the input pull was done. There's also a few small fixes
  that wandered in"

* tag 'docs-4.12-2' of git://git.lwn.net/linux:
  doc: replace FTP URL to kernel.org with HTTPS one
  docs: update references to the device io book
  Documentation: earlycon: fix Marvell Armada 3700 UART name
  docs-rst: add input docs at main index and use kernel-figure

5 years agoMerge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64...
Linus Torvalds [Thu, 11 May 2017 18:27:54 +0000 (11:27 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux

Pull more arm64 updates from Catalin Marinas:

 - Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is
   enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area()

 - Improve/sanitise user tagged pointers handling in the kernel

 - Inline asm fixes/cleanups

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y
  ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y
  mm: Silence vmap() allocation failures based on caller gfp_flags
  arm64: uaccess: suppress spurious clang warning
  arm64: atomic_lse: match asm register sizes
  arm64: armv8_deprecated: ensure extension of addr
  arm64: uaccess: ensure extension of access_ok() addr
  arm64: ensure extension of smp_store_release value
  arm64: xchg: hazard against entire exchange variable
  arm64: documentation: document tagged pointer stack constraints
  arm64: entry: improve data abort handling of tagged pointers
  arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
  arm64: traps: fix userspace cache maintenance emulation on a tagged pointer

5 years agoMerge tag 'fbdev-v4.12' of git://github.com/bzolnier/linux
Linus Torvalds [Thu, 11 May 2017 18:12:26 +0000 (11:12 -0700)]
Merge tag 'fbdev-v4.12' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, just a couple of small bugfixes,
  improvements and cleanups.

   - fix handling of probing errors in omapfb (Arvind Yadav)

   - remove incorrect __exit markups in few drivers (Dmitry Torokhov)

   - fix boot time logo support for drivers using deferred probe
     (Takeshi Kihara)

   - fix DMA allocation size for ARM CLCD driver (Liam Beguin)

   - add support for specifying size via xenstore in xen-frontfb
     (Juergen Gross)

   - support for AUS mode in imxfb driver (Martin Kaiser)

   - fix buffer on stack usage in udlfb driver (Maksim Salau)

   - probe failure path fixup in sm501fb driver (Alexey Khoroshilov)

   - fix config dependency loop for stifb driver (Arnd Bergmann)

   - misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar
     Jambhlekar)"

* tag 'fbdev-v4.12' of git://github.com/bzolnier/linux:
  fbdev: sti: don't select CONFIG_VT
  drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros
  sm501fb: don't return zero on failure path in sm501fb_start()
  video: fbdev: udlfb: Fix buffer on stack
  video: console: Remove reference to CONFIG_8xx
  dt-bindings: display: imx: entry for AUS mode
  video: fbdev: imxfb: support AUS mode
  drivers/video/fbdev: Fixing coding guidelines in acornfb.c
  xen, fbfront: add support for specifying size via xenstore
  video: ARM CLCD: fix dma allocation size
  drivers/video: Convert remaining uses of pr_warning to pr_warn
  video/logo: tidyup fb_logo_late_init initcall timing
  video: fbdev: i810: remove incorrect __exit markups
  video: fbdev: pmag-aa-fb: remove incorrect __exit markups
  video: fbdev: pmagb-b-fb: remove incorrect __exit markups
  video: fbdev: pmag-ba-fb: remove incorrect __exit markups
  omapfb: dss: Handle return errors in dss_init_ports()

5 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Thu, 11 May 2017 18:01:56 +0000 (11:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A smaller collection of fixes that should go into -rc1. This contains:

   - A fix from Christoph, fixing a regression with the WRITE_SAME and
     partial completions. Caused a BUG() on ppc.

   - Fixup for __blk_mq_stop_hw_queues(), it should be static. From
     Colin.

   - Removal of dmesg error messages on elevator switching, when invoked
     from sysfs. From me.

   - Fix for blk-stat, using this_cpu_ptr() in a section only protected
     by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From
     me.

   - Two fixes for BFQ from Paolo, one fixing a crash and one updating
     the documentation.

   - An error handling lightnvm memory leak, from Rakesh.

   - The previous blk-mq hot unplug lock reversal depends on the CPU
     hotplug rework that isn't in mainline yet. This caused a lockdep
     splat when people unplugged CPUs with blk-mq devices. From Wanpeng.

   - A regression fix for DIF/DIX on blk-mq. From Wen"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: handle partial completions for special payload requests
  blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
  blk-stat: don't use this_cpu_ptr() in a preemptable section
  elevator: remove redundant warnings on IO scheduler switch
  block, bfq: stress that low_latency must be off to get max throughput
  block, bfq: use pointer entity->sched_data only if set
  nvme: lightnvm: fix memory leak
  blk-mq: make __blk_mq_stop_hw_queues static
  lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
  block/mq: fix potential deadlock during cpu hotplug

5 years agodoc: replace FTP URL to kernel.org with HTTPS one
Michael Heimpold [Thu, 11 May 2017 08:13:44 +0000 (10:13 +0200)]
doc: replace FTP URL to kernel.org with HTTPS one

FTP services were shutdown some weeks ago, so the FTP URL
does not work anymore. Fix this by replacing it with
corresponding HTTPS URL.

Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>