sfrench/cifs-2.6.git
3 years agonet/mlx5e: Offload TC eswitch rules for VFs belonging to different PFs
Rabie Loulou [Thu, 11 Jan 2018 08:34:32 +0000 (10:34 +0200)]
net/mlx5e: Offload TC eswitch rules for VFs belonging to different PFs

When the merged eswitch capability is supported, allow offloading rules
between VFs which belong to different PFs (and hence have different
eswitch affinity).

Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agoMerge tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel...
Saeed Mahameed [Fri, 18 May 2018 00:47:09 +0000 (17:47 -0700)]
Merge tag 'mlx5-updates-2018-05-17' of git://git./linux/kernel/git/mellanox/linux

mlx5-updates-2018-05-17

mlx5 core dirver updates for both net-next and rdma-next branches.

From Christophe JAILLET, first three patches to use kvfree where needed.

From: Or Gerlitz <ogerlitz@mellanox.com>

Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.

This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Explicitly set source e-switch in offloaded TC rules
Shahar Klein [Sun, 18 Mar 2018 07:03:49 +0000 (09:03 +0200)]
net/mlx5e: Explicitly set source e-switch in offloaded TC rules

Set a specific source e-switch when setting a rule that matches on the
ingress port.

Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Add source e-switch owner
Shahar Klein [Sun, 18 Mar 2018 07:02:06 +0000 (09:02 +0200)]
net/mlx5: Add source e-switch owner

The source e-switch owner allows a vport on one e-switch port be associated
with a rule defined on the second port e-switch.

The role of the source eswitch owner valid bit in the flow group is to
allow the firmware fail driver attempts to wild card the source eswitch
match field. If this bit is not set, the firmware ignores the source
eswitch owner field totally.

Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5e: Explicitly set destination e-switch in FDB rules
Rabie Loulou [Sun, 18 Mar 2018 06:29:04 +0000 (08:29 +0200)]
net/mlx5e: Explicitly set destination e-switch in FDB rules

Set a specific destination e-switch when setting a destination vport.

Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Add destination e-switch owner
Shahar Klein [Thu, 22 Mar 2018 10:32:12 +0000 (12:32 +0200)]
net/mlx5: Add destination e-switch owner

The destination e-switch owner allows a rule in namespace of one e-switch
owner to point to a vport that is natively associated with another
e-switch owner.

Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Properly handle a vport destination when setting FTE
Shahar Klein [Thu, 22 Mar 2018 09:56:51 +0000 (11:56 +0200)]
net/mlx5: Properly handle a vport destination when setting FTE

When creating FTE, properly distinguish between destination being vport
or tir. The previous code just worked accidentally b/c of both dest being
in the same offset within a union.

Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Add merged e-switch cap
Roi Dayan [Tue, 5 Dec 2017 08:38:58 +0000 (10:38 +0200)]
net/mlx5: Add merged e-switch cap

When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
Under merged eswitch, both the matching on source vport and setting
destination vport can have a 2nd attribute which is the vhca id of the
eswitch owner.

For example:
esw0: {match: <src vport=1 owner=0> action: fwd to <dst vport=7, owner=1>}
is a flow set on eswitch0 matching on source vport=1 from his eswitch
and the action being fwd to dest vport=7 of eswitch1.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz Klein <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agoMerge branch 'net-Allow-more-drivers-with-COMPILE_TEST'
David S. Miller [Thu, 17 May 2018 21:11:07 +0000 (17:11 -0400)]
Merge branch 'net-Allow-more-drivers-with-COMPILE_TEST'

Florian Fainelli says:

====================
net: Allow more drivers with COMPILE_TEST

This patch series includes more drivers to be build tested with COMPILE_TEST
enabled. This helps cover some of the issues I just ran into with missing
a driver *sigh*.

Chanves in v3:

- drop the TI Keystone NETCP driver from the COMPILE_TEST additions

Changes in v2:

- allow FEC to build outside of CONFIG_ARM/ARM64 by defining a layout of
  registers, this is not meant to run, so this is not a real issue if we
  are not matching the correct register layout
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST
Florian Fainelli [Thu, 17 May 2018 20:07:45 +0000 (13:07 -0700)]
net: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST

Those drivers build just fine with COMPILE_TEST, so make that possible.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: freescale: Allow FEC with COMPILE_TEST
Florian Fainelli [Thu, 17 May 2018 20:07:44 +0000 (13:07 -0700)]
net: ethernet: freescale: Allow FEC with COMPILE_TEST

The Freescale FEC driver builds fine with COMPILE_TEST, so make that
possible.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: ti: Allow most drivers with COMPILE_TEST
Florian Fainelli [Thu, 17 May 2018 20:07:43 +0000 (13:07 -0700)]
net: ethernet: ti: Allow most drivers with COMPILE_TEST

Most of the TI drivers build just fine with COMPILE_TEST, cpmac (AR7) is
the exception because it uses a header file from
arch/mips/include/asm/mach-ar7/ar7.h and keystone netcp which requires
help from drivers/soc/ti/ for queue management helpers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovlan: Add extack messages for link create
David Ahern [Thu, 17 May 2018 19:29:47 +0000 (12:29 -0700)]
vlan: Add extack messages for link create

Add informative messages for error paths related to adding a
VLAN to a device.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqede: Add build_skb() support.
Manish Chopra [Thu, 17 May 2018 19:05:00 +0000 (12:05 -0700)]
qede: Add build_skb() support.

This patch makes use of build_skb() throughout in driver's receieve
data path [HW gro flow and non HW gro flow]. With this, driver can
build skb directly from the page segments which are already mapped
to the hardware instead of allocating new SKB via netdev_alloc_skb()
and memcpy the data which is quite costly.

This really improves performance (keeping same or slight gain in rx
throughput) in terms of CPU utilization which is significantly reduced
[almost half] in non HW gro flow where for every incoming MTU sized
packet driver had to allocate skb, memcpy headers etc. Additionally
in that flow, it also gets rid of bunch of additional overheads
[eth_get_headlen() etc.] to split headers and data in the skb.

Tested with:
system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores
iperf [server]: iperf -s
iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32

HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec

Average:     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
Average:     all    0.59    0.00   32.93    0.00    0.00   43.07    0.00    0.00   23.42

HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec

Average:     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
Average:     all    0.70    0.00   31.70    0.00    0.00   25.68    0.00    0.00   41.92

HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec

Average:     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
Average:     all    0.86    0.00   24.14    0.00    0.00    6.59    0.00    0.00   68.41

HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec

Average:     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
Average:     all    0.87    0.00   23.75    0.00    0.00    6.19    0.00    0.00   69.19

Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
David S. Miller [Thu, 17 May 2018 21:02:57 +0000 (17:02 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-05-17

This series contains updates to ixgbe, ixgbevf and ice drivers.

Cathy Zhou resolves sparse warnings by using the force attribute.

Mauro S M Rodrigues fixes a bug where IRQs were not freed if a PCI error
recovery system opts to remove the device which causes
ixgbe_io_error_detected() to return PCI_ERS_RESULT_DISCONNECT before
calling ixgbe_close_suspend() which results in IRQs not freed and
crashing when the remove handler calls pci_disable_device().  Resolved
this by calling ixgbe_close_suspend() before evaluating the PCI channel
state.

Pavel Tatashin releases the rtnl_lock during the call to
ixgbe_close_suspend() to allow scaling if device_shutdown() is
multi-threaded.

Emil modifies ixgbe to not validate the MAC address during a reset,
unless the MAC was set on the host so that the VF will get a new MAC
address every time it reloads.  Also updates ixgbevf to set
hw->mac.perm_addr in order to retain the custom MAC on a reset.

Anirudh updates the ice NVM read/erase/update AQ commands to align with
the latest specification.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotc-testing: fixed copy-pasting error in ife tests
Roman Mashak [Thu, 17 May 2018 13:12:49 +0000 (09:12 -0400)]
tc-testing: fixed copy-pasting error in ife tests

Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/ncsi: prevent a couple array underflows
Dan Carpenter [Thu, 17 May 2018 12:33:36 +0000 (15:33 +0300)]
net/ncsi: prevent a couple array underflows

We recently refactored this code and introduced a static checker
warning.  Smatch complains that if cmd->index is zero then we would
underflow the arrays.  That's obviously true.

The question is whether we prevent cmd->index from being zero at a
different level.  I've looked at the code and I don't immediately see
a check for that.

Fixes: 062b3e1b6d4f ("net/ncsi: Refactor MAC, VLAN filters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: init conn.tx_work & conn.send_lock sooner
Eric Dumazet [Thu, 17 May 2018 10:54:21 +0000 (03:54 -0700)]
net/smc: init conn.tx_work & conn.send_lock sooner

syzkaller found that following program crashes the host :

{
  int fd = socket(AF_SMC, SOCK_STREAM, 0);
  int val = 1;

  listen(fd, 0);
  shutdown(fd, SHUT_RDWR);
  setsockopt(fd, 6, TCP_NODELAY, &val, 4);
}

Simply initialize conn.tx_work & conn.send_lock at socket creation,
rather than deeper in the stack.

ODEBUG: assert_init not available (active state 0) object type: timer_list hint:           (null)
WARNING: CPU: 1 PID: 13988 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 13988 Comm: syz-executor0 Not tainted 4.17.0-rc4+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 panic+0x22f/0x4de kernel/panic.c:184
 __warn.cold.8+0x163/0x1b3 kernel/panic.c:536
 report_bug+0x252/0x2d0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326
RSP: 0018:ffff880197a37880 EFLAGS: 00010086
RAX: 0000000000000061 RBX: 0000000000000005 RCX: ffffc90001ed0000
RDX: 0000000000004aaf RSI: ffffffff8160f6f1 RDI: 0000000000000001
RBP: ffff880197a378c0 R08: ffff8801aa7a0080 R09: ffffed003b5e3eb2
R10: ffffed003b5e3eb2 R11: ffff8801daf1f597 R12: 0000000000000001
R13: ffffffff88d96980 R14: ffffffff87fa19a0 R15: ffffffff81666ec0
 debug_object_assert_init+0x309/0x500 lib/debugobjects.c:692
 debug_timer_assert_init kernel/time/timer.c:724 [inline]
 debug_assert_init kernel/time/timer.c:776 [inline]
 del_timer+0x74/0x140 kernel/time/timer.c:1198
 try_to_grab_pending+0x439/0x9a0 kernel/workqueue.c:1223
 mod_delayed_work_on+0x91/0x250 kernel/workqueue.c:1592
 mod_delayed_work include/linux/workqueue.h:541 [inline]
 smc_setsockopt+0x387/0x6d0 net/smc/af_smc.c:1367
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 01d2f7e2cdd3 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: flower: fix error path during representor creation
Jiri Pirko [Thu, 17 May 2018 10:06:43 +0000 (12:06 +0200)]
nfp: flower: fix error path during representor creation

Don't store repr pointer to reprs array until the representor is
successfully created. This avoids message about "representor
destruction" even when it was never created. Also it cleans-up the flow.
Also, check return value after port alloc.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mvpp2-small-improvements'
David S. Miller [Thu, 17 May 2018 20:18:55 +0000 (16:18 -0400)]
Merge branch 'mvpp2-small-improvements'

Antoine Tenart says:

====================
net: mvpp2: small improvements

Those 3 patches are small improvements to the Marvell PPv2 driver. The
series does not conflict with the one sent about phylink and
1000/2500baseX support, so the two series can live in parallel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: print rx error with rate-limit
Yan Markman [Thu, 17 May 2018 08:34:27 +0000 (10:34 +0200)]
net: mvpp2: print rx error with rate-limit

Prevent flood of RX error prints during heavy traffic with weak signal
in link by checking net_ratelimit() before using netdev_err().

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: small rework, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: set mac address does not require the stop/start sequence
Yan Markman [Thu, 17 May 2018 08:34:26 +0000 (10:34 +0200)]
net: mvpp2: set mac address does not require the stop/start sequence

Remove special stop/start handling from the set_mac_address callback.
All this special care is not needed, and can be removed. It also
simplifies the up/down status in the driver and helps avoiding possible
link status mismatch issues.

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: avoid checking for free aggregated descriptors twice
Yan Markman [Thu, 17 May 2018 08:34:25 +0000 (10:34 +0200)]
net: mvpp2: avoid checking for free aggregated descriptors twice

Avoid repeating the check for free aggregated descriptors when it
already failed at the beginning of the function.

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mvpp2-phylink-conversion'
David S. Miller [Thu, 17 May 2018 20:11:40 +0000 (16:11 -0400)]
Merge branch 'mvpp2-phylink-conversion'

Antoine Tenart says:

====================
net: mvpp2: phylink conversion

This series convert the Marvell PPv2 driver to phylink (models the MAC
to PHY link).

One important point is the PPv2 driver supports two probe modes: device
tree and ACPI. This series only brings phylink support for the device
tree mode, as the ACPI one will need further work. Still, the driver
should be working as before when using ACPI. This split should be
temporary, and was discussed with Marcin (in Cc.) who added ACPI support
to the driver.

Also as the SFP cages on both DB boards can be considered as non-wired.
We thus chose not to describe those SFP cages and we use fixed-link.

The rest of the series uses phylink to add support for 1000BaseX and
2500BaseX modes in the PPv2 driver. To do this, two patches are needed
in the common PHY framework (patches 3 and 4). The last 4 patches modify
the device tree to use the new PPv2 functionalities.

The series has been tested for the device tree mode on the 7040-db,
8040-db and 8040-mcbin boards, to ensure all the interface where working
as expected.

@Dave: patches 7 to 10 should go through the mvebu tree (Gregory in
Cc.) to avoid any conflict with the other mvebu dt patches taken during
this cycle.

The series is based on today's net-next.

Since v2:
  - Removed the SFP description from the DB boards, as their SFP cages
    are wired properly. We now use fixed-link.
  - Because of this rework, split the series in two, so that the SFP
    part is reviewed separately.
  - Small fixes in the phylink patch.
  - Rebased on the latest net-next branch.

Since v1:
  - Chose a different approach to the SFP changes, as the previous ones
    weren't valid and reworked both BD boards device trees.
  - Misc fixes.
  - Added Kishon's acked-by on one patch.
  - Rebaed on latest net-next branch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: 2500baseX support
Antoine Tenart [Thu, 17 May 2018 08:29:35 +0000 (10:29 +0200)]
net: mvpp2: 2500baseX support

This patch adds the 2500Base-X PHY mode support in the Marvell PPv2
driver. 2500Base-X is quite close to 1000Base-X and SGMII modes and uses
nearly the same code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: 1000baseX support
Antoine Tenart [Thu, 17 May 2018 08:29:34 +0000 (10:29 +0200)]
net: mvpp2: 1000baseX support

This patch adds the 1000Base-X PHY mode support in the Marvell PPv2
driver. 1000Base-X is quite close the SGMII and uses nearly the same
code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agophy: cp110-comphy: 2.5G SGMII mode
Antoine Tenart [Thu, 17 May 2018 08:29:33 +0000 (10:29 +0200)]
phy: cp110-comphy: 2.5G SGMII mode

This patch allow the CP110 comphy to configure some lanes in the
2.5G SGMII mode. This mode is quite close to SGMII and uses nearly the
same code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agophy: add 2.5G SGMII mode to the phy_mode enum
Antoine Tenart [Thu, 17 May 2018 08:29:32 +0000 (10:29 +0200)]
phy: add 2.5G SGMII mode to the phy_mode enum

This patch adds one more generic PHY mode to the phy_mode enum, to allow
configuring generic PHYs to the 2.5G SGMII mode by using the set_mode
callback.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: phylink support
Antoine Tenart [Thu, 17 May 2018 08:29:31 +0000 (10:29 +0200)]
net: mvpp2: phylink support

Convert the PPv2 driver to implement phylink helpers, and use phylink in
DT mode. The other mode supported is ACPI, which will need further work
in order to be entirely compatible with phylink.

The MAC and GoP configuration functions were completely moved to fit
into the phylink helpers. When a PHY is always present between the MAC
and the physical port, phylink only is used, but when this is not the
case (the MAC directly is connected to the physical port) the link IRQ
is used to detect changes in the link state and call phylink_mac_change.

The ACPI mode do not uses phylink as of now, and the changes shouldn't
impact its use.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: mvpp2: align the ethtool ops definition
Antoine Tenart [Thu, 17 May 2018 08:29:30 +0000 (10:29 +0200)]
net: mvpp2: align the ethtool ops definition

Cosmetic patch to align the ethtool functions to ops definitions. This
patch does not change in any way the driver's behaviour.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge tag 'wireless-drivers-next-for-davem-2018-05-17' of git://git.kernel.org/pub...
David S. Miller [Thu, 17 May 2018 20:00:40 +0000 (16:00 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2018-05-17' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.18

The first pull request for 4.18. As usual new features and bug fixes
but nothing really special.

I also merged wireless-drivers due to an iwlwifi patch dependency.

Major changes:

iwlwifi

* implement Traffic Condition Monitor and use it for scan, BT coex and
  to detect when the AP doesn't support UAPSD properly

* some more work for the 22000 family of devices;

* introduce AMSDU rate control offload

qtnfmac

* DFS offload support

rsi

* roaming enhancements

* increase max supported aggregation subframes

* don't advertise 5 GHz support if the device doesn't support it

brcmfmac

* add support for BCM4366E chipset

* add support for bcm43364 wireless chipset

ath10k

* enable temperature reads for QCA6174 and QCA9377

* add firmware memory dump support for QCA9984

* continue adding WCN3990 support via SNOC bus
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovmxnet3: Replace msleep(1) with usleep_range()
YueHaibing [Thu, 17 May 2018 03:46:41 +0000 (11:46 +0800)]
vmxnet3: Replace msleep(1) with usleep_range()

As documented in Documentation/timers/timers-howto.txt,
replace msleep(1) with usleep_range().

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: introduce link change helper
Tonghao Zhang [Thu, 17 May 2018 02:09:23 +0000 (19:09 -0700)]
bonding: introduce link change helper

Introduce an new common helper to avoid redundancy.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'tcp-default-RACK-loss-recovery'
David S. Miller [Thu, 17 May 2018 19:41:30 +0000 (15:41 -0400)]
Merge branch 'tcp-default-RACK-loss-recovery'

Yuchung Cheng says:

====================
tcp: default RACK loss recovery

This patch set implements the features correspond to the
draft-ietf-tcpm-rack-03 version of the RACK draft.
https://datatracker.ietf.org/meeting/101/materials/slides-101-tcpm-update-on-tcp-rack-00

1. SACK: implement equivalent DUPACK threshold heuristic in RACK to
   replace existing RFC6675 recovery (tcp_mark_head_lost).

2. Non-SACK: simplify RFC6582 NewReno implementation

3. RTO: apply RACK's time-based approach to avoid spuriouly
   marking very recently sent packets lost.

4. with (1)(2)(3), make RACK the exclusive fast recovery mechanism to
   mark losses based on time on S/ACK. Tail loss probe and F-RTO remain
   enabled by default as complementary mechanisms to send probes in
   CA_Open and CA_Loss states. The probes would solicit S/ACKs to trigger
   RACK time-based loss detection.

All Google web and internal servers have been running RACK-only mode
(4) for a while now. a/b experiments indicate RACK/TLP on average
reduces recovery latency by 10% compared to RFC6675. RFC6675
is default-off now but can be enabled by disabling RACK (sysctl
net.ipv4.tcp_recovery=0) for unseen issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: don't mark recently sent packets lost on RTO
Yuchung Cheng [Wed, 16 May 2018 23:40:17 +0000 (16:40 -0700)]
tcp: don't mark recently sent packets lost on RTO

An RTO event indicates the head has not been acked for a long time
after its last (re)transmission. But the other packets are not
necessarily lost if they have been only sent recently (for example
due to application limit). This patch would prohibit marking packets
sent within an RTT to be lost on RTO event, using similar logic in
TCP RACK detection.

Normally the head (SND.UNA) would be marked lost since RTO should
fire strictly after the head was sent. An exception is when the
most recent RACK RTT measurement is larger than the (previous)
RTO. To address this exception the head is always marked lost.

Congestion control interaction: since we may not mark every packet
lost, the congestion window may be more than 1 (inflight plus 1).
But only one packet will be retransmitted after RTO, since
tcp_retransmit_timer() calls tcp_retransmit_skb(...,segs=1). The
connection still performs slow start from one packet (with Cubic
congestion control).

This commit was tested in an A/B test with Google web servers,
and showed a reduction of 2% in (spurious) retransmits post
timeout (SlowStartRetrans), and correspondingly reduced DSACKs
(DSACKIgnoredOld) by 7%.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: new helper tcp_rack_skb_timeout
Yuchung Cheng [Wed, 16 May 2018 23:40:16 +0000 (16:40 -0700)]
tcp: new helper tcp_rack_skb_timeout

Create and export a new helper tcp_rack_skb_timeout and move tcp_is_rack
to prepare the final RTO change.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: separate loss marking and state update on RTO
Yuchung Cheng [Wed, 16 May 2018 23:40:15 +0000 (16:40 -0700)]
tcp: separate loss marking and state update on RTO

Previously when TCP times out, it first updates cwnd and ssthresh,
marks packets lost, and then updates congestion state again. This
was fine because everything not yet delivered is marked lost,
so the inflight is always 0 and cwnd can be safely set to 1 to
retransmit one packet on timeout.

But the inflight may not always be 0 on timeout if TCP changes to
mark packets lost based on packet sent time. Therefore we must
first mark the packet lost, then set the cwnd based on the
(updated) inflight.

This is not a pure refactor. Congestion control may potentially
break if it uses (not yet updated) inflight to compute ssthresh.
Fortunately all existing congestion control modules does not do that.
Also it changes the inflight when CA_LOSS_EVENT is called, and only
westwood processes such an event but does not use inflight.

This change has two other minor side benefits:
1) consistent with Fast Recovery s.t. the inflight is updated
   first before tcp_enter_recovery flips state to CA_Recovery.

2) avoid intertwining loss marking with state update, making the
   code more readable.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: new helper tcp_timeout_mark_lost
Yuchung Cheng [Wed, 16 May 2018 23:40:14 +0000 (16:40 -0700)]
tcp: new helper tcp_timeout_mark_lost

Refactor using a new helper, tcp_timeout_mark_loss(), that marks packets
lost upon RTO.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: account lost retransmit after timeout
Yuchung Cheng [Wed, 16 May 2018 23:40:13 +0000 (16:40 -0700)]
tcp: account lost retransmit after timeout

The previous approach for the lost and retransmit bits was to
wipe the slate clean: zero all the lost and retransmit bits,
correspondingly zero the lost_out and retrans_out counters, and
then add back the lost bits (and correspondingly increment lost_out).

The new approach is to treat this very much like marking packets
lost in fast recovery. We don’t wipe the slate clean. We just say
that for all packets that were not yet marked sacked or lost, we now
mark them as lost in exactly the same way we do for fast recovery.

This fixes the lost retransmit accounting at RTO time and greatly
simplifies the RTO code by sharing much of the logic with Fast
Recovery.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: simpler NewReno implementation
Yuchung Cheng [Wed, 16 May 2018 23:40:12 +0000 (16:40 -0700)]
tcp: simpler NewReno implementation

This is a rewrite of NewReno loss recovery implementation that is
simpler and standalone for readability and better performance by
using less states.

Note that NewReno refers to RFC6582 as a modification to the fast
recovery algorithm. It is used only if the connection does not
support SACK in Linux. It should not to be confused with the Reno
(AIMD) congestion control.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: disable RFC6675 loss detection
Yuchung Cheng [Wed, 16 May 2018 23:40:11 +0000 (16:40 -0700)]
tcp: disable RFC6675 loss detection

This patch disables RFC6675 loss detection and make sysctl
net.ipv4.tcp_recovery = 1 controls a binary choice between RACK
(1) or RFC6675 (0).

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: support DUPACK threshold in RACK
Yuchung Cheng [Wed, 16 May 2018 23:40:10 +0000 (16:40 -0700)]
tcp: support DUPACK threshold in RACK

This patch adds support for the classic DUPACK threshold rule
(#DupThresh) in RACK.

When the number of packets SACKed is greater or equal to the
threshold, RACK sets the reordering window to zero which would
immediately mark all the unsacked packets below the highest SACKed
sequence lost. Since this approach is known to not work well with
reordering, RACK only uses it if no reordering has been observed.

The DUPACK threshold rule is a particularly useful extension to the
fast recoveries triggered by RACK reordering timer. For example
data-center transfers where the RTT is much smaller than a timer
tick, or high RTT path where the default RTT/4 may take too long.

Note that this patch differs slightly from RFC6675. RFC6675
considers a packet lost when at least #DupThresh higher-sequence
packets are SACKed.

With RACK, for connections that have seen reordering, RACK
continues to use a dynamically-adaptive time-based reordering
window to detect losses. But for connections on which we have not
yet seen reordering, this patch considers a packet lost when at
least one higher sequence packet is SACKed and the total number
of SACKed packets is at least DupThresh. For example, suppose a
connection has not seen reordering, and sends 10 packets, and
packets 3, 5, 7 are SACKed. RFC6675 considers packets 1 and 2
lost. RACK considers packets 1, 2, 4, 6 lost.

There is some small risk of spurious retransmits here due to
reordering. However, this is mostly limited to the first flight of
a connection on which the sender receives SACKs from reordering.
And RFC 6675 and FACK loss detection have a similar risk on the
first flight with reordering (it's just that the risk of spurious
retransmits from reordering was slightly narrower for those older
algorithms due to the margin of 3*MSS).

Also the minimum reordering window is reduced from 1 msec to 0
to recover quicker on short RTT transfers. Therefore RACK is more
aggressive in marking packets lost during recovery to reduce the
reordering window timeouts.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devices
Ivan Khoronzhuk [Wed, 16 May 2018 22:21:45 +0000 (01:21 +0300)]
net: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devices

The early versions of am33xx devices, related to ES1.0 SoC revision
have errata limiting mq support. That's the same errata as
commit 7da1160002f1 ("drivers: net: cpsw: add am335x errata workarround for
interrutps")

AM33xx Errata [1] Advisory 1.0.9
http://www.ti.com/lit/er/sprz360f/sprz360f.pdf

After additional investigation were found that drivers w/a is
propagated on all AM33xx SoCs and on DM814x. But the errata exists
only for ES1.0 of AM33xx family, limiting mq support for revisions
after ES1.0. So, disable mq support only for related SoCs and use
separate polls for revisions allowing mq.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'sched-refactor-NOLOCK-qdiscs'
David S. Miller [Thu, 17 May 2018 16:46:55 +0000 (12:46 -0400)]
Merge branch 'sched-refactor-NOLOCK-qdiscs'

Paolo Abeni says:

====================
sched: refactor NOLOCK qdiscs

With the introduction of NOLOCK qdiscs, pfifo_fast performances in the
uncontended scenario degraded measurably, especially after the commit
eb82a9944792 ("net: sched, fix OOO packets with pfifo_fast").

This series restore the pfifo_fast performances in such scenario back the
previous level, mainly reducing the number of atomic operations required to
perform the qdisc_run() call. Even performances in the contended scenario
increase measurably.

Note: This series is on top of:

sched: manipulate __QDISC_STATE_RUNNING in qdisc_run_* helpers
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agopfifo_fast: drop unneeded additional lock on dequeue
Paolo Abeni [Tue, 15 May 2018 14:24:37 +0000 (16:24 +0200)]
pfifo_fast: drop unneeded additional lock on dequeue

After the previous patch, for NOLOCK qdiscs, q->seqlock is
always held when the dequeue() is invoked, we can drop
any additional locking to protect such operation.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosched: replace __QDISC_STATE_RUNNING bit with a spin lock
Paolo Abeni [Tue, 15 May 2018 14:24:36 +0000 (16:24 +0200)]
sched: replace __QDISC_STATE_RUNNING bit with a spin lock

So that we can use lockdep on it.
The newly introduced sequence lock has the same scope of busylock,
so it shares the same lockdep annotation, but it's only used for
NOLOCK qdiscs.

With this changeset we acquire such lock in the control path around
flushing operation (qdisc reset), to allow more NOLOCK qdisc perf
improvement in the next patch.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoice: Update NVM AQ command functions
Anirudh Venkataramanan [Mon, 16 Apr 2018 16:55:36 +0000 (09:55 -0700)]
ice: Update NVM AQ command functions

This patch updates the NVM read/erase/update AQ commands to align with
the latest specification.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: fix MAC address changes through ixgbevf_set_mac()
Emil Tantilov [Mon, 14 May 2018 18:16:16 +0000 (11:16 -0700)]
ixgbevf: fix MAC address changes through ixgbevf_set_mac()

Set hw->mac.perm_addr in ixgbevf_set_mac() in order to avoid losing the
custom MAC on reset. This can happen in the following case:

>ip link set $vf address $mac
>ethtool -r $vf

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: force VF to grab new MAC on driver reload
Emil Tantilov [Mon, 14 May 2018 18:16:11 +0000 (11:16 -0700)]
ixgbe: force VF to grab new MAC on driver reload

Do not validate the MAC address during a reset, unless the MAC was set on
the host. This way the VF will get a new MAC address every time it reloads.

Remove the "no MAC address assigned" message since it will get spammed on
reset and it doesn't help much as the MAC on the VF is randomly generated.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: release lock for the duration of ixgbe_suspend_close()
Pavel Tatashin [Thu, 3 May 2018 03:59:30 +0000 (23:59 -0400)]
ixgbe: release lock for the duration of ixgbe_suspend_close()

Currently, during device_shutdown() ixgbe holds rtnl_lock for the duration
of lengthy ixgbe_close_suspend(). On machines with multiple ixgbe cards
this lock prevents scaling if device_shutdown() function is multi-threaded.

It is not necessary to hold this lock during ixgbe_close_suspend()
as it is not held when ixgbe_close() is called also during shutdown but for
kexec case.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe/ixgbevf: Free IRQ when PCI error recovery removes the device
Mauro S M Rodrigues [Wed, 2 May 2018 20:26:28 +0000 (17:26 -0300)]
ixgbe/ixgbevf: Free IRQ when PCI error recovery removes the device

Since commit f7f37e7ff2b9 ("ixgbe: handle close/suspend race with
netif_device_detach/present") ixgbe_close_suspend is called, from
ixgbe_close, only if the device is present, i.e. if it isn't detached.
That exposed a situation where IRQs weren't freed if a PCI error
recovery system opts to remove the device. For such case the pci channel
state is set to pci_channel_io_perm_failure and ixgbe_io_error_detected
was returning PCI_ERS_RESULT_DISCONNECT before calling
ixgbe_close_suspend consequentially not freeing IRQ and crashing when
the remove handler calls pci_disable_device, hitting a BUG_ON at
free_msi_irqs, which asserts that there is no non-free IRQ associated
with the device to be removed:

BUG_ON(irq_has_action(entry->irq + i));

The issue is fixed by calling the ixgbe_close_suspend before evaluate
the pci channel state.

Reported-by: Naresh Bannoth <nbannoth@in.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: Mauro S M Rodrigues <maurosr@linux.vnet.ibm.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: cleanup sparse warnings
Cathy Zhou [Fri, 13 Apr 2018 18:28:37 +0000 (11:28 -0700)]
ixgbe: cleanup sparse warnings

Sparse complains valid conversions between restricted types, force
attribute is used to avoid those warnings.

Signed-off-by: Cathy Zhou <cathy.zhou@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
David S. Miller [Thu, 17 May 2018 02:47:11 +0000 (22:47 -0400)]
Merge git://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-05-17

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Provide a new BPF helper for doing a FIB and neighbor lookup
   in the kernel tables from an XDP or tc BPF program. The helper
   provides a fast-path for forwarding packets. The API supports
   IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
   implemented in this initial work, from David (Ahern).

2) Just a tiny diff but huge feature enabled for nfp driver by
   extending the BPF offload beyond a pure host processing offload.
   Offloaded XDP programs are allowed to set the RX queue index and
   thus opening the door for defining a fully programmable RSS/n-tuple
   filter replacement. Once BPF decided on a queue already, the device
   data-path will skip the conventional RSS processing completely,
   from Jakub.

3) The original sockmap implementation was array based similar to
   devmap. However unlike devmap where an ifindex has a 1:1 mapping
   into the map there are use cases with sockets that need to be
   referenced using longer keys. Hence, sockhash map is added reusing
   as much of the sockmap code as possible, from John.

4) Introduce BTF ID. The ID is allocatd through an IDR similar as
   with BPF maps and progs. It also makes BTF accessible to user
   space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
   through BPF_OBJ_GET_INFO_BY_FD, from Martin.

5) Enable BPF stackmap with build_id also in NMI context. Due to the
   up_read() of current->mm->mmap_sem build_id cannot be parsed.
   This work defers the up_read() via a per-cpu irq_work so that
   at least limited support can be enabled, from Song.

6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
   JIT conversion as well as implementation of an optimized 32/64 bit
   immediate load in the arm64 JIT that allows to reduce the number of
   emitted instructions; in case of tested real-world programs they
   were shrinking by three percent, from Daniel.

7) Add ifindex parameter to the libbpf loader in order to enable
   BPF offload support. Right now only iproute2 can load offloaded
   BPF and this will also enable libbpf for direct integration into
   other applications, from David (Beckett).

8) Convert the plain text documentation under Documentation/bpf/ into
   RST format since this is the appropriate standard the kernel is
   moving to for all documentation. Also add an overview README.rst,
   from Jesper.

9) Add __printf verification attribute to the bpf_verifier_vlog()
   helper. Though it uses va_list we can still allow gcc to check
   the format string, from Mathieu.

10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
    is a bash 4.0+ feature which is not guaranteed to be available
    when calling out to shell, therefore use a more portable variant,
    from Joe.

11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
    instead of relying on the gcc built-in, from Björn.

12) Fix a sock hashmap kmalloc warning reported by syzbot when an
    overly large key size is used in hashmap then causing overflows
    in htab->elem_size. Reject bogus attr->key_size early in the
    sock_hash_alloc(), from Yonghong.

13) Ensure in BPF selftests when urandom_read is being linked that
    --build-id is always enabled so that test_stacktrace_build_id[_nmi]
    won't be failing, from Alexei.

14) Add bitsperlong.h as well as errno.h uapi headers into the tools
    header infrastructure which point to one of the arch specific
    uapi headers. This was needed in order to fix a build error on
    some systems for the BPF selftests, from Sirio.

15) Allow for short options to be used in the xdp_monitor BPF sample
    code. And also a bpf.h tools uapi header sync in order to fix a
    selftest build failure. Both from Prashant.

16) More formally clarify the meaning of ID in the direct packet access
    section of the BPF documentation, from Wang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoIB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
Christophe JAILLET [Thu, 17 May 2018 00:50:19 +0000 (17:50 -0700)]
IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'

When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.

Fixes: 1cbe6fc86ccfe ("IB/mlx5: Add support for CQE compressing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
Christophe JAILLET [Thu, 17 May 2018 00:49:01 +0000 (17:49 -0700)]
net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'

When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.

Fixes: fed9ce22bf8ae ("net/mlx5: E-Switch, Add API to create vport rx rules")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agonet/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
Christophe JAILLET [Thu, 17 May 2018 00:46:45 +0000 (17:46 -0700)]
net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'

When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.

Fixes: 9efa75254593d ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
3 years agobpf: sockmap, on update propagate errors back to userspace
John Fastabend [Wed, 16 May 2018 23:38:14 +0000 (16:38 -0700)]
bpf: sockmap, on update propagate errors back to userspace

When an error happens in the update sockmap element logic also pass
the err up to the user.

Fixes: e5cd3abcb31a ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agobpf: fix sock hashmap kmalloc warning
Yonghong Song [Wed, 16 May 2018 21:06:26 +0000 (14:06 -0700)]
bpf: fix sock hashmap kmalloc warning

syzbot reported a kernel warning below:
  WARNING: CPU: 0 PID: 4499 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996
  Kernel panic - not syncing: panic_on_warn set ...

  CPU: 0 PID: 4499 Comm: syz-executor050 Not tainted 4.17.0-rc3+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x1b9/0x294 lib/dump_stack.c:113
   panic+0x22f/0x4de kernel/panic.c:184
   __warn.cold.8+0x163/0x1b3 kernel/panic.c:536
   report_bug+0x252/0x2d0 lib/bug.c:186
   fixup_bug arch/x86/kernel/traps.c:178 [inline]
   do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
   invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
  RIP: 0010:kmalloc_slab+0x56/0x70 mm/slab_common.c:996
  RSP: 0018:ffff8801d907fc58 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff8801aeecb280 RCX: ffffffff8185ebd7
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000ffffffe1
  RBP: ffff8801d907fc58 R08: ffff8801adb5e1c0 R09: ffffed0035a84700
  R10: ffffed0035a84700 R11: ffff8801ad423803 R12: ffff8801aeecb280
  R13: 00000000fffffff4 R14: ffff8801ad891a00 R15: 00000000014200c0
   __do_kmalloc mm/slab.c:3713 [inline]
   __kmalloc+0x25/0x760 mm/slab.c:3727
   kmalloc include/linux/slab.h:517 [inline]
   map_get_next_key+0x24a/0x640 kernel/bpf/syscall.c:858
   __do_sys_bpf kernel/bpf/syscall.c:2131 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:2096 [inline]
   __x64_sys_bpf+0x354/0x4f0 kernel/bpf/syscall.c:2096
   do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

The test case is against sock hashmap with a key size 0xffffffe1.
Such a large key size will cause the below code in function
sock_hash_alloc() overflowing and produces a smaller elem_size,
hence map creation will be successful.
    htab->elem_size = sizeof(struct htab_elem) +
                      round_up(htab->map.key_size, 8);

Later, when map_get_next_key is called and kernel tries
to allocate the key unsuccessfully, it will issue
the above warning.

Similar to hashtab, ensure the key size is at most
MAX_BPF_STACK for a successful map creation.

Fixes: 81110384441a ("bpf: sockmap, add hash map support")
Reported-by: syzbot+e4566d29080e7f3460ff@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agolibbpf: add ifindex to enable offload support
David Beckett [Wed, 16 May 2018 21:02:49 +0000 (14:02 -0700)]
libbpf: add ifindex to enable offload support

BPF programs currently can only be offloaded using iproute2. This
patch will allow programs to be offloaded using libbpf calls.

Signed-off-by: David Beckett <david.beckett@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agobpf: add __printf verification to bpf_verifier_vlog
Mathieu Malaterre [Wed, 16 May 2018 20:27:41 +0000 (22:27 +0200)]
bpf: add __printf verification to bpf_verifier_vlog

__printf is useful to verify format and arguments. ‘bpf_verifier_vlog’
function is used twice in verifier.c in both cases the caller function
already uses the __printf gcc attribute.

Remove the following warning, triggered with W=1:

  kernel/bpf/verifier.c:176:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agosamples/bpf: Decrement ttl in fib forwarding example
David Ahern [Tue, 15 May 2018 23:20:52 +0000 (16:20 -0700)]
samples/bpf: Decrement ttl in fib forwarding example

Only consider forwarding packets if ttl in received packet is > 1 and
decrement ttl before handing off to bpf_redirect_map.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agoMerge branch 'bpf-sock-hashmap'
Daniel Borkmann [Wed, 16 May 2018 20:02:14 +0000 (22:02 +0200)]
Merge branch 'bpf-sock-hashmap'

John Fastabend says:

====================
In the original sockmap implementation we got away with using an
array similar to devmap. However, unlike devmap where an ifindex
has a nice 1:1 function into the map we have found some use cases
with sockets that need to be referenced using longer keys.

This series adds support for a sockhash map reusing as much of
the sockmap code as possible. I made the decision to add sockhash
specific helpers vs trying to generalize the existing helpers
because (a) they have sockmap in the name and (b) the keys are
different types. I prefer to be explicit here rather than play
type games or do something else tricky.

To test this we duplicate all the sockmap testing except swap out
the sockmap with a sockhash.

v2: fix file stats and add v2 tag
v3: move tool updates into test patch, move bpftool updates into
    its own patch, and fixup the test patch stats to catch the
    renamed file and provide only diffs ± on that.
v4: Add documentation to UAPI bpf.h
v5: Add documentation to tools UAPI bpf.h
v6: 'git add' test_sockhash_kern.c which was previously missing
    but was not causing issues because of typo in test script,
    noticed by Daniel. After this the git format-patch -M option
    no longer tracks the rename of the test_sockmap_kern files for
    some reason. I guess the diff has exceeded some threshold.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agobpf: bpftool, support for sockhash
John Fastabend [Mon, 14 May 2018 17:00:19 +0000 (10:00 -0700)]
bpf: bpftool, support for sockhash

This adds the SOCKHASH map type to bpftools so that we get correct
pretty printing.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agobpf: selftest additions for SOCKHASH
John Fastabend [Mon, 14 May 2018 17:00:18 +0000 (10:00 -0700)]
bpf: selftest additions for SOCKHASH

This runs existing SOCKMAP tests with SOCKHASH map type. To do this
we push programs into include file and build two BPF programs. One
for SOCKHASH and one for SOCKMAP.

We then run the entire test suite with each type.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
3 years agocxgb4: update LE-TCAM collection for T6
Rahul Lakkireddy [Wed, 16 May 2018 14:21:15 +0000 (19:51 +0530)]
cxgb4: update LE-TCAM collection for T6

For T6, clip table is separated from main TCAM. So, update LE-TCAM
collection logic to collect clip table TCAM as well. IPv6 takes
4 entries in clip table TCAM compared to 2 entries in main TCAM.

Also, in case of errors, keep LE-TCAM collected so far and set the
status to partial dump.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'qed-LL2-fixes'
David S. Miller [Wed, 16 May 2018 18:49:01 +0000 (14:49 -0400)]
Merge branch 'qed-LL2-fixes'

Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
3 years agoqed: Fix LL2 race during connection terminate
Michal Kalderon [Wed, 16 May 2018 11:44:40 +0000 (14:44 +0300)]
qed: Fix LL2 race during connection terminate

Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqed: Fix possibility of list corruption during rmmod flows
Michal Kalderon [Wed, 16 May 2018 11:44:39 +0000 (14:44 +0300)]
qed: Fix possibility of list corruption during rmmod flows

The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c23c0f ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqed: LL2 flush isles when connection is closed
Michal Kalderon [Wed, 16 May 2018 11:44:38 +0000 (14:44 +0300)]
qed: LL2 flush isles when connection is closed

Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethoc: Remove useless test before clk_disable_unprepare
YueHaibing [Wed, 16 May 2018 11:18:22 +0000 (19:18 +0800)]
net: ethoc: Remove useless test before clk_disable_unprepare

clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: Remove useless test before clk_disable_unprepare
YueHaibing [Wed, 16 May 2018 10:59:19 +0000 (18:59 +0800)]
net: stmmac: Remove useless test before clk_disable_unprepare

clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qcom/emac: Encapsulate sgmii ops under one structure
Hemanth Puranik [Wed, 16 May 2018 01:10:53 +0000 (06:40 +0530)]
net: qcom/emac: Encapsulate sgmii ops under one structure

This patch introduces ops structure for sgmii, This by ensures that
we do not need dummy functions in case of emulation platforms.

Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'rmnet-next'
David S. Miller [Wed, 16 May 2018 18:23:05 +0000 (14:23 -0400)]
Merge branch 'rmnet-next'

Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Updates 2018-05-14

Patch 1 adds tx_drops counter to more places.
Patch 2 adds ethtool private stats support to make it easy to debug
the checksum offload path.
Patch 3 is a cleanup in command packet processing path.

v1->v2: Fix the incorrect if / else statement in
rmnet_map_checksum_downlink_packet() and define rmnet_ethtool_ops
as static as mentioned by kbuild test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qualcomm: rmnet: Remove redundant command check
Subash Abhinov Kasiviswanathan [Wed, 16 May 2018 00:52:02 +0000 (18:52 -0600)]
net: qualcomm: rmnet: Remove redundant command check

The command packet size is already checked once in
rmnet_map_deaggregate() for the header, packet and trailer size, so
this additional check is not needed.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qualcomm: rmnet: Add support for ethtool private stats
Subash Abhinov Kasiviswanathan [Wed, 16 May 2018 00:52:01 +0000 (18:52 -0600)]
net: qualcomm: rmnet: Add support for ethtool private stats

Add ethtool private stats handler to debug the handling of packets
with checksum offload header / trailer. This allows to keep track of
the number of packets for which hardware computes the checksum and
counts and reasons where checksum computation was skipped in hardware
and was done in the network stack.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qualcomm: rmnet: Capture all drops in transmit path
Subash Abhinov Kasiviswanathan [Wed, 16 May 2018 00:52:00 +0000 (18:52 -0600)]
net: qualcomm: rmnet: Capture all drops in transmit path

Packets in transmit path could potentially be dropped if there were
errors while adding the MAP header or the checksum header.
Increment the tx_drops stats in these cases.

Additionally, refactor the code to free the packet and increment
the tx_drops stat under a single label.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'of-mdio-Fall-back-to-mdiobus_register-with-NULL-device_node'
David S. Miller [Wed, 16 May 2018 18:20:36 +0000 (14:20 -0400)]
Merge branch 'of-mdio-Fall-back-to-mdiobus_register-with-NULL-device_node'

Florian Fainelli says:

====================
of: mdio: Fall back to mdiobus_register() with NULL device_node

This patch series updates of_mdiobus_register() such that when the device_node
argument is NULL, it calls mdiobus_register() directly. This is consistent with
the behavior of of_mdiobus_register() when CONFIG_OF=n.

I only converted the most obvious drivers, there are others that have a much
less obvious behavior and specifically attempt to deal with CONFIG_ACPI.

Changes in v2:

- fixed build error in davincin_mdio.c (Grygorii)
- reworked first patch a bit: commit message, subject and removed useless
  code comment
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodrivers: net: Remove device_node checks with of_mdiobus_register()
Florian Fainelli [Tue, 15 May 2018 23:56:19 +0000 (16:56 -0700)]
drivers: net: Remove device_node checks with of_mdiobus_register()

A number of drivers have the following pattern:

if (np)
of_mdiobus_register()
else
mdiobus_register()

which the implementation of of_mdiobus_register() now takes care of.
Remove that pattern in drivers that strictly adhere to it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoof: mdio: Fall back to mdiobus_register() with NULL device_node
Florian Fainelli [Tue, 15 May 2018 23:56:18 +0000 (16:56 -0700)]
of: mdio: Fall back to mdiobus_register() with NULL device_node

When the device_node specified is NULL, fall back to mdiobus_register().
We have a number of drivers having a similar pattern which is:

if (np)
of_mdiobus_register()
else
mdiobus_register()

so incorporate that behavior within the core of_mdiobus_register()
function. This is also consistent with the stub version that we defined
when CONFIG_OF=n.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret value
Grygorii Strashko [Tue, 15 May 2018 23:37:25 +0000 (18:37 -0500)]
net: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret value

This fixes klockworks warnings: Pointer 'dev' returned from call to
function 'bus_find_device' at line 179 may be NULL and will be dereferenced
at line 181.

    cpsw-phy-sel.c:179: 'dev' is assigned the return value from function 'bus_find_device'.
    bus.c:342: 'bus_find_device' explicitly returns a NULL value.
    cpsw-phy-sel.c:181: 'dev' is dereferenced by passing argument 1 to function 'dev_get_drvdata'.
    device.h:1024: 'dev' is passed to function 'dev_get_drvdata'.
    device.h:1026: 'dev' is explicitly dereferenced.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[nsekhar@ti.com: add an error message, fix return path]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoRevert "bonding: allow carrier and link status to determine link state"
Debabrata Banerjee [Wed, 16 May 2018 18:02:13 +0000 (14:02 -0400)]
Revert "bonding: allow carrier and link status to determine link state"

This reverts commit 1386c36b30388f46a95100924bfcae75160db715.

We don't want to encourage drivers to not report carrier status
correctly, therefore remove this commit.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotc-testing: updated mirred and vlan with more tests
Roman Mashak [Tue, 15 May 2018 18:31:14 +0000 (14:31 -0400)]
tc-testing: updated mirred and vlan with more tests

Added extra test cases for different control actions (reclassify, pipe
etc.), cookies, max values & exceeding maximum, and replace existing
actions unit tests.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotc-testing: fixed copy-pasting error in police tests
Roman Mashak [Tue, 15 May 2018 14:14:40 +0000 (10:14 -0400)]
tc-testing: fixed copy-pasting error in police tests

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosched: manipulate __QDISC_STATE_RUNNING in qdisc_run_* helpers
Paolo Abeni [Tue, 15 May 2018 08:50:31 +0000 (10:50 +0200)]
sched: manipulate __QDISC_STATE_RUNNING in qdisc_run_* helpers

Currently NOLOCK qdiscs pay a measurable overhead to atomically
manipulate the __QDISC_STATE_RUNNING. Such bit is flipped twice per
packet in the uncontended scenario with packet rate below the
line rate: on packed dequeue and on the next, failing dequeue attempt.

This changeset moves the bit manipulation into the qdisc_run_{begin,end}
helpers, so that the bit is now flipped only once per packet, with
measurable performance improvement in the uncontended scenario.

This also allows simplifying the qdisc teardown code path - since
qdisc_is_running() is now effective for each qdisc type - and avoid a
possible race between qdisc_run() and dev_deactivate_many(), as now
the some_qdisc_is_busy() can properly detect NOLOCK qdiscs being busy
dequeuing packets.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'bonding-performance-and-reliability'
David S. Miller [Wed, 16 May 2018 16:15:12 +0000 (12:15 -0400)]
Merge branch 'bonding-performance-and-reliability'

Debabrata Banerjee says:

====================
bonding: performance and reliability

Series of fixes to how rlb updates are handled, code cleanup, allowing
higher performance tx hashing in balance-alb mode, and reliability of
link up/down monitoring.

v2: refactor bond_is_nondyn_tlb with inline fn, update log comment to
point out that multicast addresses will not get rlb updates.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: allow carrier and link status to determine link state
Debabrata Banerjee [Mon, 14 May 2018 18:48:10 +0000 (14:48 -0400)]
bonding: allow carrier and link status to determine link state

In a mixed environment it may be difficult to tell if your hardware
support carrier, if it does not it can always report true. With a new
use_carrier option of 2, we can check both carrier and link status
sequentially, instead of one or the other

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: allow use of tx hashing in balance-alb
Debabrata Banerjee [Mon, 14 May 2018 18:48:09 +0000 (14:48 -0400)]
bonding: allow use of tx hashing in balance-alb

The rx load balancing provided by balance-alb is not mutually
exclusive with using hashing for tx selection, and should provide a decent
speed increase because this eliminates spinlocks and cache contention.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: use common mac addr checks
Debabrata Banerjee [Mon, 14 May 2018 18:48:08 +0000 (14:48 -0400)]
bonding: use common mac addr checks

Replace homegrown mac addr checks with faster defs from etherdevice.h

Note that this will also prevent any rlb arp updates for multicast
addresses, however this should have been forbidden anyway.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: don't queue up extraneous rlb updates
Debabrata Banerjee [Mon, 14 May 2018 18:48:07 +0000 (14:48 -0400)]
bonding: don't queue up extraneous rlb updates

arps for incomplete entries can't be sent anyway.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'net-smc-enhancements-2018-05-15'
David S. Miller [Wed, 16 May 2018 15:49:20 +0000 (11:49 -0400)]
Merge branch 'net-smc-enhancements-2018-05-15'

Ursula Braun says:

====================
net/smc: enhancements 2018/05/15

here are smc patches for net-next. The first one is a fix for net-next
commit 01d2f7e2cdd3 "net/smc: sockopts TCP_NODELAY and TCP_CORK".
Patch 7 improves Connection Layer Control error handling, patch 10
improves abnormal termination of link groups. The remaining patches
from Karsten improve Link Layer Control code.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: check for pending termination
Karsten Graul [Tue, 15 May 2018 15:05:03 +0000 (17:05 +0200)]
net/smc: check for pending termination

Avoid to run the processing in smc_lgr_terminate() more than once,
remember when the link group termination is triggered.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: drop messages when link state is inactive
Karsten Graul [Tue, 15 May 2018 15:05:02 +0000 (17:05 +0200)]
net/smc: drop messages when link state is inactive

Drop incoming messages when the link is flagged as inactive.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: set link inactive before calling smc_lgr_free()
Karsten Graul [Tue, 15 May 2018 15:05:01 +0000 (17:05 +0200)]
net/smc: set link inactive before calling smc_lgr_free()

Before smc_lgr_free() is called the link must be set inactive by calling
smc_llc_link_inactive().

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: handle all error codes from smc_conn_create()
Karsten Graul [Tue, 15 May 2018 15:05:00 +0000 (17:05 +0200)]
net/smc: handle all error codes from smc_conn_create()

Always set a reason_code when smc_conn_create() returns an error code.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: use a workqueue to defer llc send
Karsten Graul [Tue, 15 May 2018 15:04:59 +0000 (17:04 +0200)]
net/smc: use a workqueue to defer llc send

SMC handles deferred work in tasklets. As tasklets cannot sleep this
can result in rare EBUSY conditions, so defer this work in a work queue.
The high level api functions do not defer work because they can sleep
until the llc send is actually completed.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: move link llc initialization to llc layer
Karsten Graul [Tue, 15 May 2018 15:04:58 +0000 (17:04 +0200)]
net/smc: move link llc initialization to llc layer

Move the llc layer specific initialization and cleanup out of smc_core.c
into smc_llc.c (smc_llc_link_init and smc_llc_link_clear). Move all
initialization of a link into the new init function.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: simplify test_link function usage
Karsten Graul [Tue, 15 May 2018 15:04:57 +0000 (17:04 +0200)]
net/smc: simplify test_link function usage

Make smc_llc_send_test_link() static and remove it from the header file.
And to send a test_link response set the response flag and send the
message back as-is, without using smc_llc_send_test_link(). And because
smc_llc_send_test_link() must no longer send responses, remove the
response flag handling from the function.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: remove unnecessary cast
Karsten Graul [Tue, 15 May 2018 15:04:56 +0000 (17:04 +0200)]
net/smc: remove unnecessary cast

Remove an unneeded (void *) cast from the calls to
smc_llc_send_message(). No functional changes.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: register new rmbs with the peer
Karsten Graul [Tue, 15 May 2018 15:04:55 +0000 (17:04 +0200)]
net/smc: register new rmbs with the peer

Register new rmb buffers with the remote peer by exchanging a
confirm_rkey llc message.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/smc: no tx work trigger for fallback sockets
Ursula Braun [Tue, 15 May 2018 15:04:54 +0000 (17:04 +0200)]
net/smc: no tx work trigger for fallback sockets

If TCP_NODELAY is set or TCP_CORK is reset, setsockopt triggers the
tx worker. This does not make sense, if the SMC socket switched to
the TCP fallback when the connection is created. This patch adds
the additional check for the fallback case.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>