sfrench/cifs-2.6.git
11 months agoMerge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Thu, 18 Jul 2019 18:11:51 +0000 (11:11 -0700)]
Merge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs updates from Steve French:
 "Fixes (three for stable) and improvements including much faster
  encryption (SMB3.1.1 GCM)"

* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
  smb3: smbdirect no longer experimental
  cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
  cifs: fix crash in cifs_dfs_do_automount
  cifs: fix parsing of symbolic link error response
  cifs: refactor and clean up arguments in the reparse point parsing
  SMB3: query inode number on open via create context
  smb3: Send netname context during negotiate protocol
  smb3: do not send compression info by default
  smb3: add new mount option to retrieve mode from special ACE
  smb3: Allow query of symlinks stored as reparse points
  cifs: Fix a race condition with cifs_echo_request
  cifs: always add credits back for unsolicited PDUs
  fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
  add some missing definitions
  cifs: fix typo in debug message with struct field ia_valid
  smb3: minor cleanup of compound_send_recv
  CIFS: Fix module dependency
  cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
  cifs: Fix check for matching with existing mount
  cifs: Properly handle auto disabling of serverino option
  ...

11 months agoMerge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Linus Torvalds [Thu, 18 Jul 2019 18:05:25 +0000 (11:05 -0700)]
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "Lots of exciting things this time!

   - support for rbd object-map and fast-diff features (myself). This
     will speed up reads, discards and things like snap diffs on sparse
     images.

   - ceph.snap.btime vxattr to expose snapshot creation time (David
     Disseldorp). This will be used to integrate with "Restore Previous
     Versions" feature added in Windows 7 for folks who reexport ceph
     through SMB.

   - security xattrs for ceph (Zheng Yan). Only selinux is supported for
     now due to the limitations of ->dentry_init_security().

   - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
     Layton). This is actually a single feature bit which was missing
     because of the filesystem pieces. With this in, the kernel client
     will finally be reported as "luminous" by "ceph features" -- it is
     still being reported as "jewel" even though all required Luminous
     features were implemented in 4.13.

   - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
     with xattrs is to not terminate and this was causing
     inconsistencies with ceph-fuse.

   - change filesystem time granularity from 1 us to 1 ns, again fixing
     an inconsistency with ceph-fuse (Luis Henriques).

  On top of this there are some additional dentry name handling and cap
  flushing fixes from Zheng. Finally, Jeff is formally taking over for
  Zheng as the filesystem maintainer"

* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
  ceph: fix end offset in truncate_inode_pages_range call
  ceph: use generic_delete_inode() for ->drop_inode
  ceph: use ceph_evict_inode to cleanup inode's resource
  ceph: initialize superblock s_time_gran to 1
  MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
  rbd: setallochint only if object doesn't exist
  rbd: support for object-map and fast-diff
  rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
  libceph: export osd_req_op_data() macro
  libceph: change ceph_osdc_call() to take page vector for response
  libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
  rbd: new exclusive lock wait/wake code
  rbd: quiescing lock should wait for image requests
  rbd: lock should be quiesced on reacquire
  rbd: introduce copyup state machine
  rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
  rbd: move OSD request allocation into object request state machines
  rbd: factor out __rbd_osd_setup_discard_ops()
  rbd: factor out rbd_osd_setup_copyup()
  rbd: introduce obj_req->osd_reqs list
  ...

11 months agoMerge tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Linus Torvalds [Thu, 18 Jul 2019 17:58:52 +0000 (10:58 -0700)]
Merge tag 'dax-for-5.3' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull dax updates from Dan Williams:
 "The fruits of a bug hunt in the fsdax implementation with Willy and a
  small feature update for device-dax:

   - Fix a hang condition that started triggering after the Xarray
     conversion of fsdax in the v4.20 kernel.

   - Add a 'resource' (root-only physical base address) sysfs attribute
     to device-dax instances to correlate memory-blocks onlined via the
     kmem driver with a given device instance"

* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix missed wakeup with PMD faults
  device-dax: Add a 'resource' attribute

11 months agoMerge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm...
Linus Torvalds [Thu, 18 Jul 2019 17:52:08 +0000 (10:52 -0700)]
Merge tag 'libnvdimm-for-5.3' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "Primarily just the virtio_pmem driver:

   - virtio_pmem

     The new virtio_pmem facility introduces a paravirtualized
     persistent memory device that allows a guest VM to use DAX
     mechanisms to access a host-file with host-page-cache. It arranges
     for MAP_SYNC to be disabled and instead triggers a host fsync()
     when a 'write-cache flush' command is sent to the virtual disk
     device.

   - Miscellaneous small fixups"

* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  virtio_pmem: fix sparse warning
  xfs: disable map_sync for async flush
  ext4: disable map_sync for async flush
  dax: check synchronous mapping is supported
  dm: enable synchronous dax
  libnvdimm: add dax_dev sync flag
  virtio-pmem: Add virtio pmem driver
  libnvdimm: nd_region flush callback support
  libnvdimm, namespace: Drop uuid_t implementation detail

11 months agoMerge tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Thu, 18 Jul 2019 17:47:59 +0000 (10:47 -0700)]
Merge tag 'linux-watchdog-5.3-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add Allwinner H6 watchdog

 - drop warning after registering device patches

 - hpwdt improvements

 - gpio: add support for nowayout option

 - introduce CONFIG_WATCHDOG_OPEN_TIMEOUT

 - convert remaining drivers to use SPDX license identifier

 - Fixes and improvements on several watchdog device drivers

* tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
  watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe
  watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock
  watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
  watchdog: convert remaining drivers to use SPDX license identifier
  dt-bindings: watchdog: Rename bindings documentation file
  watchdog: mei_wdt: no need to check return value of debugfs_create functions
  watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
  docs: watchdog: Fix build error.
  docs: watchdog: convert docs to ReST and rename to *.rst
  watchdog: make the device time out at open_deadline when open_timeout is used
  watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  watchdog: introduce watchdog.open_timeout commandline parameter
  dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
  watchdog: imx_sc: Add pretimeout support
  watchdog: renesas_wdt: Add a few cycles delay
  watchdog: gpio: add support for nowayout option
  watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly
  dt-bindings: watchdog: add Allwinner H6 watchdog
  watchdog: jz4740: Avoid starting watchdog in set_timeout
  watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>
  ...

11 months agoMerge tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Thu, 18 Jul 2019 16:36:51 +0000 (09:36 -0700)]
Merge tag 'sound-fix-5.3-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes.

   - The optimization of PM resume with HD-audio HDMI codecs, which
     eventually work around weird issues

   - A correction of Intel Icelake HDMI audio code

   - Quirks for Dell machines with Realtek HD-audio codecs

   - The fix for too long sequencer write stall that was spotted by
     syzkaller

   - A few trivial cleanups reported by coccinelle"

* tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Don't resume forcibly i915 HDMI/DP codec
  ALSA: hda/hdmi - Fix i915 reverse port/pin mapping
  ALSA: hda/hdmi - Remove duplicated define
  ALSA: seq: Break too long mutex context in the write loop
  ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
  ALSA: rme9652: Unneeded variable: "result".
  ALSA: emu10k1: Remove unneeded variable "change"
  ALSA: au88x0: Remove unneeded variable: "changed"
  ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
  ALSA: ps3: Remove Unneeded variable: "ret"
  ALSA: lx6464es: Remove unneeded variable err

11 months agoMerge tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Thu, 18 Jul 2019 16:32:28 +0000 (09:32 -0700)]
Merge tag 'pm-5.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These modify the Intel RAPL driver to allow it to use an MMIO
  interface to the hardware, make the int340X thermal driver provide
  such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
  driver (these changes depend on the previously merged x86 arch
  changes), update cpufreq to use the PM QoS framework for managing the
  min and max frequency limits, and add update the imx-cpufreq-dt
  cpufreq driver to support i.MX8MN.

  Specifics:

   - Add MMIO interface support to the Intel RAPL power capping driver
     and update the int340X thermal driver to provide a RAPL MMIO
     interface (Zhang Rui, Stephen Rothwell).

   - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
     Bhardwaj).

   - Make cpufreq use the PM QoS framework (instead of notifiers) for
     managing the min and max frequency constraints (Viresh Kumar).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang)"

* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  cpufreq: Make cpufreq_generic_init() return void
  intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
  powercap/rapl: Add Ice Lake NNPI support to RAPL driver
  powercap/intel_rapl: add support for ICX-D
  powercap/intel_rapl: add support for ICX
  powercap/intel_rapl: add support for IceLake desktop
  intel_rapl: Fix module autoloading issue
  int340X/processor_thermal_device: add support for MMIO RAPL
  intel_rapl: support two power limits for every RAPL domain
  intel_rapl: support 64 bit register
  intel_rapl: abstract RAPL common code
  intel_rapl: cleanup hardcoded MSR access
  intel_rapl: cleanup some functions
  intel_rapl: abstract register access operations
  intel_rapl: abstract register address
  intel_rapl: introduce struct rapl_if_private
  intel_rapl: introduce intel_rapl.h
  intel_rapl: remove hardcoded register index
  intel_rapl: use reg instead of msr
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  ...

11 months agoMerge tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Thu, 18 Jul 2019 16:12:34 +0000 (09:12 -0700)]
Merge tag 'acpi-5.3-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These get rid of two clang warnings, add a new quirk mechanism to the
  ACPI backlight driver (and apply it to one machine) and update the
  table load object initialization in ACPICA (this is a replacement for
  a previously reverted ACPICA commit).

  Specifics:

   - Make ACPI table loading work more consistently regardless of the
     exact mechanism used for loading a table (Erik Schmauss).

   - Get rid of two clang warnings (Arnd Bergmann).

   - Add new quirk mechanism to the ACPI backlight driver and use it to
     add a quirk for PB Easynote MZ35 (Hans de Goede)"

* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table
  ACPICA: Update table load object initialization

11 months agoMerge branch 'floppy'
Linus Torvalds [Thu, 18 Jul 2019 15:43:20 +0000 (08:43 -0700)]
Merge branch 'floppy'

Merge floppy ioctl verification fixes from Denis Efremov.

This also marks the floppy driver as orphaned - it turns out that Jiri
no longer has working hardware.

Actual working physical floppy hardware is getting hard to find, and
while Willy was able to test this, I think the driver can be considered
pretty much dead from an actual hardware standpoint.  The hardware that
is still sold seems to be mainly USB-based, which doesn't use this
legacy driver at all.

The old floppy disk controller is still emulated in various VM
environments, so the driver isn't going away, but let's see if anybody
is interested to step up to maintain it.

The lack of hardware also likely means that the ioctl range verification
fixes are probably mostly relevant to anybody using floppies in a
virtual environment.  Which is probably also going away in favor of USB
storage emulation, but who knows.

Will Decon reviewed the patches but I'm not rebasing them just for that,
so I'll add a

Reviewed-by: Will Deacon <will@kernel.org>
here instead.

* floppy:
  MAINTAINERS: mark floppy.c orphaned
  floppy: fix out-of-bounds read in copy_buffer
  floppy: fix invalid pointer dereference in drive_name
  floppy: fix out-of-bounds read in next_valid_format
  floppy: fix div-by-zero in setup_format_params

11 months agoMAINTAINERS: mark floppy.c orphaned
Jiri Kosina [Wed, 17 Jul 2019 22:03:51 +0000 (00:03 +0200)]
MAINTAINERS: mark floppy.c orphaned

I volunteered myself to maintain it quite some time ago back when I
fixed the concurrency issues which exhibited itself only with
VM-emulated devices, and at the same time I still had the physical 3.5"
reader to test all the changes.

The reader doesn't work any more though, so I guess it's time to step
down from this super-prestigious role :p and mark floppy.c as Orphaned.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoMerge branches 'acpi-misc' and 'acpi-video'
Rafael J. Wysocki [Thu, 18 Jul 2019 08:22:20 +0000 (10:22 +0200)]
Merge branches 'acpi-misc' and 'acpi-video'

* acpi-misc:
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table

* acpi-video:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35

11 months agoMerge branch 'pm-cpufreq'
Rafael J. Wysocki [Thu, 18 Jul 2019 07:49:30 +0000 (09:49 +0200)]
Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq: Make cpufreq_generic_init() return void
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Add QoS requests for userspace constraints
  cpufreq: intel_pstate: Reuse refresh_frequency_limits()
  cpufreq: Register notifiers with the PM QoS framework
  PM / QoS: Add support for MIN/MAX frequency constraints
  PM / QOS: Pass request type to dev_pm_qos_read_value()
  PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
  PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()

11 months agofloppy: fix out-of-bounds read in copy_buffer
Denis Efremov [Fri, 12 Jul 2019 18:55:23 +0000 (21:55 +0300)]
floppy: fix out-of-bounds read in copy_buffer

This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.

The FDDEFPRM ioctl allows one to set the geometry of a disk.  The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function.  It is
possible to overflow the max_sector.  Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.

An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.

The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofloppy: fix invalid pointer dereference in drive_name
Denis Efremov [Fri, 12 Jul 2019 18:55:22 +0000 (21:55 +0300)]
floppy: fix invalid pointer dereference in drive_name

This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.

The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function.  Thus, the field
should be checked the same way as the autodetect field.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  Next, FDGETDRVTYP ioctl should
be used to call the drive_name.  A floppy disk is not required to be
inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofloppy: fix out-of-bounds read in next_valid_format
Denis Efremov [Fri, 12 Jul 2019 18:55:21 +0000 (21:55 +0300)]
floppy: fix out-of-bounds read in next_valid_format

This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.

The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  A floppy disk is not required to
be inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofloppy: fix div-by-zero in setup_format_params
Denis Efremov [Fri, 12 Jul 2019 18:55:20 +0000 (21:55 +0300)]
floppy: fix div-by-zero in setup_format_params

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoMerge tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform...
Linus Torvalds [Wed, 17 Jul 2019 20:16:30 +0000 (13:16 -0700)]
Merge tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull another x86 platform driver update from Andy Shevchenko:
 "Provide better naming for ABI, i.e. tell that we have fan boost mode.

  It won't break any ABI, but has to be done now to avoid confusion in
  the future"

* tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus: Rename "fan mode" to "fan boost mode"

11 months agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Linus Torvalds [Wed, 17 Jul 2019 20:13:41 +0000 (13:13 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Convert thermal documents to ReST (Mauro Carvalho Chehab)

 - Fix a cyclic depedency in between thermal core and governors (Daniel
   Lezcano)

 - Fix processor_thermal_device driver to re-evaluate power limits after
   resume (Srinivas Pandruvada, Zhang Rui)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal_device: Fix build warning
  docs: thermal: convert to ReST
  thermal/drivers/core: Use governor table to initialize
  thermal/drivers/core: Add init section table for self-encapsulation
  drivers: thermal: processor_thermal: Read PPCC on resume

11 months agoMerge tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux...
Linus Torvalds [Wed, 17 Jul 2019 20:05:21 +0000 (13:05 -0700)]
Merge tag 'gpio-v5.3-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:

 - Revert a SPIO GPIO fix that didn't fix anything but instead created
   new problems.

 - Remove the EM GPIO irqdomain in a safe manner.

 - Fix a memory leak in the gpio quirks.

 - Make the DaVinci error path silent on probe deferral.

* tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  gpio: em: remove the gpiochip before removing the irq domain
  gpiolib: of: fix a memory leak in of_gpio_flags_quirks()
  gpio: davinci: silence error prints in case of EPROBE_DEFER

11 months agoMerge tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc
Linus Torvalds [Wed, 17 Jul 2019 18:53:53 +0000 (11:53 -0700)]
Merge tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
 "This contains support for hardware spinlock TI K3 AM65x and J721E
  family of SoCs, support for using hwspinlocks from atomic context and
  better error reporting when dealing with hardware disabled in
  DeviceTree"

* tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
  hwspinlock: add the 'in_atomic' API
  hwspinlock: document the hwspinlock 'raw' API
  hwspinlock: stm32: implement the relax() ops
  hwspinlock: ignore disabled device
  hwspinlock/omap: Add a trace during probe
  hwspinlock/omap: Add support for TI K3 SoCs
  dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs

11 months agoMerge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc
Linus Torvalds [Wed, 17 Jul 2019 18:44:41 +0000 (11:44 -0700)]
Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for the STM32 remoteproc, additional i.MX platforms
  with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.

  Also initial support for vendor specific resource table entries and
  support for unprocessed Qualcomm firmware files"

* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
  remoteproc: stm32: fix building without ARM SMCC
  remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
  remoteproc: copy parent dma_pfn_offset for vdev
  remoteproc: qcom: q6v5-mss: Support loading non-split images
  soc: qcom: mdt_loader: Support loading non-split images
  remoteproc: stm32: add an ST stm32_rproc driver
  dt-bindings: remoteproc: add bindings for stm32 remote processor driver
  dt-bindings: stm32: add bindings for ML-AHB interconnect
  remoteproc: Use struct_size() helper
  remoteproc: add vendor resources handling
  remoteproc: imx: Fix typo in "failed"
  remoteproc: imx: Broaden the Kconfig selection logic
  remoteproc,rpmsg: add missing MAINTAINERS file entries
  remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
  dt-bindings: remoteproc: Rename and amend Hexagon v56 binding

11 months agoMerge tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc
Linus Torvalds [Wed, 17 Jul 2019 18:31:11 +0000 (11:31 -0700)]
Merge tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
 "This contains a DT binding update and a change to make the remote
  function of rpmsg_devices optional"

* tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc:
  rpmsg: core: Make remove handler for rpmsg driver optional.
  dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM

11 months agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Wed, 17 Jul 2019 18:26:09 +0000 (11:26 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio, vhost updates from Michael Tsirkin:
 "Fixes, features, performance:

   - new iommu device

   - vhost guest memory access using vmap (just meta-data for now)

   - minor fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-mmio: add error check for platform_get_irq
  scsi: virtio_scsi: Use struct_size() helper
  iommu/virtio: Add event queue
  iommu/virtio: Add probe request
  iommu: Add virtio-iommu driver
  PCI: OF: Initialize dev->fwnode appropriately
  of: Allow the iommu-map property to omit untranslated devices
  dt-bindings: virtio: Add virtio-pci-iommu node
  dt-bindings: virtio-mmio: Add IOMMU description
  vhost: fix clang build warning
  vhost: access vq metadata through kernel virtual address
  vhost: factor out setting vring addr and num
  vhost: introduce helpers to get the size of metadata area
  vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
  vhost: fine grain userspace memory accessors
  vhost: generalize adding used elem

11 months agoMerge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio
Linus Torvalds [Wed, 17 Jul 2019 18:23:13 +0000 (11:23 -0700)]
Merge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Static symbol cleanup in mdev samples (Kefeng Wang)

 - Use vma help in nvlink code (Peng Hao)

 - Remove unused code in mbochs sample (YueHaibing)

 - Send uevents around mdev registration (Alex Williamson)

* tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio:
  mdev: Send uevents around parent device registration
  sample/mdev/mbochs: remove set but not used variable 'mdev_state'
  vfio: vfio_pci_nvlink2: use a vma helper function
  vfio-mdev/samples: make some symbols static

11 months agoMerge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Linus Torvalds [Wed, 17 Jul 2019 17:07:48 +0000 (10:07 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...

11 months agoMerge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Linus Torvalds [Wed, 17 Jul 2019 17:03:50 +0000 (10:03 -0700)]
Merge tag 'rtc-5.3' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...

11 months agoMerge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Wed, 17 Jul 2019 16:55:43 +0000 (09:55 -0700)]
Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...

11 months agoMerge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Linus Torvalds [Wed, 17 Jul 2019 16:42:03 +0000 (09:42 -0700)]
Merge tag 'mips_5.3' of git://git./linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "A light batch this time around but significant improvements for
  certain systems:

   - Removal of readq & writeq for MIPS32 kernels where they would
     simply BUG() anyway, allowing drivers or other code that #ifdefs on
     their presence to work properly.

   - Improvements for Ingenic JZ4740 systems, including support for the
     external memory controller & pinmuxing fixes for qi_lb60/NanoNote
     systems.

   - Improvements for Lantiq systems, in particular around SMP & IPIs.

   - DT updates for ralink/MediaTek MT7628a systems to probe & configure
     a bunch more devices.

   - Miscellaneous cleanups & build fixes"

* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  MIPS: fix some more fall through errors in arch/mips
  MIPS: perf events: handle switch statement falling through warnings
  mips/kprobes: Export kprobe_fault_handler()
  MAINTAINERS: Add myself as Ingenic SoCs maintainer
  MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
  MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
  MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
  MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
  MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
  MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
  MIPS: lantiq: Add SMP support for lantiq interrupt controller
  MIPS: lantiq: Shorten register names, remove unused macros
  MIPS: lantiq: Fix bitfield masking
  MIPS: lantiq: Remove unused macros
  MIPS: lantiq: Fix attributes of of_device_id structure
  MIPS: lantiq: Change variables to the same type as the source
  MIPS: lantiq: Move macro directly to iomem function
  mips: Remove q-accessors from non-64bit platforms
  FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
  MIPS: configs: Remove useless UEVENT_HELPER_PATH
  ...

11 months agoMerge tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux...
Linus Torvalds [Wed, 17 Jul 2019 16:36:38 +0000 (09:36 -0700)]
Merge tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull h8300 update from Yoshinori Sato:
 "Remove unused barrier defines"

* tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  H8300: remove unused barrier defines

11 months agoMerge tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Linus Torvalds [Wed, 17 Jul 2019 16:34:10 +0000 (09:34 -0700)]
Merge tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull SH updates from Yoshinori Sato.

kprobe fix, defconfig updates and a SH Kconfig fix.

* tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
  sh: configs: Remove useless UEVENT_HELPER_PATH
  Fix allyesconfig output.

11 months agoplatform/x86: asus: Rename "fan mode" to "fan boost mode"
Daniel Drake [Wed, 17 Jul 2019 05:10:58 +0000 (13:10 +0800)]
platform/x86: asus: Rename "fan mode" to "fan boost mode"

The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.

The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.

Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.

There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
11 months agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Wed, 17 Jul 2019 15:58:04 +0000 (08:58 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
 "VM:
   - z3fold fixes and enhancements by Henry Burns and Vitaly Wool

   - more accurate reclaimed slab caches calculations by Yafang Shao

   - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
     Christoph Hellwig

   - !CONFIG_MMU fixes by Christoph Hellwig

   - new novmcoredd parameter to omit device dumps from vmcore, by
     Kairui Song

   - new test_meminit module for testing heap and pagealloc
     initialization, by Alexander Potapenko

   - ioremap improvements for huge mappings, by Anshuman Khandual

   - generalize kprobe page fault handling, by Anshuman Khandual

   - device-dax hotplug fixes and improvements, by Pavel Tatashin

   - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V

   - add pte_devmap() support for arm64, by Robin Murphy

   - unify locked_vm accounting with a helper, by Daniel Jordan

   - several misc fixes

  core/lib:
   - new typeof_member() macro including some users, by Alexey Dobriyan

   - make BIT() and GENMASK() available in asm, by Masahiro Yamada

   - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
     code generation, by Alexey Dobriyan

   - rbtree code size optimizations, by Michel Lespinasse

   - convert struct pid count to refcount_t, by Joel Fernandes

  get_maintainer.pl:
   - add --no-moderated switch to skip moderated ML's, by Joe Perches

  misc:
   - ptrace PTRACE_GET_SYSCALL_INFO interface

   - coda updates

   - gdb scripts, various"

[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
  fs/select.c: use struct_size() in kmalloc()
  mm: add account_locked_vm utility function
  arm64: mm: implement pte_devmap support
  mm: introduce ARCH_HAS_PTE_DEVMAP
  mm: clean up is_device_*_page() definitions
  mm/mmap: move common defines to mman-common.h
  mm: move MAP_SYNC to asm-generic/mman-common.h
  device-dax: "Hotremove" persistent memory that is used like normal RAM
  mm/hotplug: make remove_memory() interface usable
  device-dax: fix memory and resource leak if hotplug fails
  include/linux/lz4.h: fix spelling and copy-paste errors in documentation
  ipc/mqueue.c: only perform resource calculation if user valid
  include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
  scripts/gdb: add helpers to find and list devices
  scripts/gdb: add lx-genpd-summary command
  drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
  kernel/pid.c: convert struct pid count to refcount_t
  drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
  select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
  select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
  ...

11 months agovirtio_pmem: fix sparse warning
Pankaj Gupta [Fri, 12 Jul 2019 05:16:10 +0000 (10:46 +0530)]
virtio_pmem: fix sparse warning

This patch fixes below sparse warning related to __virtio
type in virtio pmem driver. This is reported by Intel test
bot on linux-next tree.

nd_virtio.c:56:28: warning: incorrect type in assignment
                                (different base types)
nd_virtio.c:56:28:    expected unsigned int [unsigned] [usertype] type
nd_virtio.c:56:28:    got restricted __virtio32
nd_virtio.c:93:59: warning: incorrect type in argument 2
                                (different base types)
nd_virtio.c:93:59:    expected restricted __virtio32 [usertype] val
nd_virtio.c:93:59:    got unsigned int [unsigned] [usertype] ret

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
11 months agodax: Fix missed wakeup with PMD faults
Matthew Wilcox (Oracle) [Thu, 4 Jul 2019 03:21:25 +0000 (23:21 -0400)]
dax: Fix missed wakeup with PMD faults

RocksDB can hang indefinitely when using a DAX file.  This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry.  We use the wrong index in the hash and end up waiting on
the wrong waitqueue.

There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).

We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.

Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd800682f ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
11 months agofs/select.c: use struct_size() in kmalloc()
Gustavo A. R. Silva [Tue, 16 Jul 2019 23:30:58 +0000 (16:30 -0700)]
fs/select.c: use struct_size() in kmalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array.  For example:

  struct foo {
       int stuff;
       struct boo entry[];
  };

  size = sizeof(struct foo) + count * sizeof(struct boo);
  instance = kmalloc(size, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

  instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm: add account_locked_vm utility function
Daniel Jordan [Tue, 16 Jul 2019 23:30:54 +0000 (16:30 -0700)]
mm: add account_locked_vm utility function

locked_vm accounting is done roughly the same way in five places, so
unify them in a helper.

Include the helper's caller in the debug print to distinguish between
callsites.

Error codes stay the same, so user-visible behavior does too.  The one
exception is that the -EPERM case in tce_account_locked_vm is removed
because Alexey has never seen it triggered.

[daniel.m.jordan@oracle.com: v3]
Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
[sfr@canb.auug.org.au: fix mm/util.c]
Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alan Tull <atull@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoarm64: mm: implement pte_devmap support
Robin Murphy [Tue, 16 Jul 2019 23:30:51 +0000 (16:30 -0700)]
arm64: mm: implement pte_devmap support

In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs.  Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.

[robin.murphy@arm.com: build fixes]
Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com
Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm: introduce ARCH_HAS_PTE_DEVMAP
Robin Murphy [Tue, 16 Jul 2019 23:30:47 +0000 (16:30 -0700)]
mm: introduce ARCH_HAS_PTE_DEVMAP

ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
with the long-out-of-date comment can lead to the impression than an
architecture may just enable it (since __add_pages() now "comprehends
device memory" for itself) and expect things to work.

In practice, however, ZONE_DEVICE users have little chance of
functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
dependency so the real situation is clearer.

Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm: clean up is_device_*_page() definitions
Robin Murphy [Tue, 16 Jul 2019 23:30:44 +0000 (16:30 -0700)]
mm: clean up is_device_*_page() definitions

Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to
make them all consistent in depending on their respective config options
even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons.  This
allows a little more compile-time optimisation as well as the conceptual
and cosmetic cleanup.

Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm/mmap: move common defines to mman-common.h
Aneesh Kumar K.V [Tue, 16 Jul 2019 23:30:41 +0000 (16:30 -0700)]
mm/mmap: move common defines to mman-common.h

Two architecture that use arch specific MMAP flags are powerpc and
sparc.  We still have few flag values common across them and other
architectures.  Consolidate this in mman-common.h.

Also update the comment to indicate where to find HugeTLB specific
reserved values

Link: http://lkml.kernel.org/r/20190604090950.31417-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm: move MAP_SYNC to asm-generic/mman-common.h
Aneesh Kumar K.V [Tue, 16 Jul 2019 23:30:38 +0000 (16:30 -0700)]
mm: move MAP_SYNC to asm-generic/mman-common.h

This enables support for synchronous DAX fault on powerpc

The generic changes are added as part of b6fb293f2497 ("mm: Define
MAP_SYNC and VM_SYNC flags")

Without this, mmap returns EOPNOTSUPP for MAP_SYNC with
MAP_SHARED_VALIDATE

Instead of adding MAP_SYNC with same value to
arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to
asm-generic/mman-common.h.  Two architectures using mman-common.h
directly are sparc and powerpc.  We should be able to consloidate more
#defines to mman-common.h.  That can be done as a separate patch.

Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agodevice-dax: "Hotremove" persistent memory that is used like normal RAM
Pavel Tatashin [Tue, 16 Jul 2019 23:30:35 +0000 (16:30 -0700)]
device-dax: "Hotremove" persistent memory that is used like normal RAM

It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.

This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.

To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver.  So, operations should look like this:

  echo offline > /sys/devices/system/memory/memoryN/state
  ...
  echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind

Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.

Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm/hotplug: make remove_memory() interface usable
Pavel Tatashin [Tue, 16 Jul 2019 23:30:31 +0000 (16:30 -0700)]
mm/hotplug: make remove_memory() interface usable

Presently the remove_memory() interface is inherently broken.  It tries
to remove memory but panics if some memory is not offline.  The problem
is that it is impossible to ensure that all memory blocks are offline as
this function also takes lock_device_hotplug that is required to change
memory state via sysfs.

So, between calling this function and offlining all memory blocks there
is always a window when lock_device_hotplug is released, and therefore,
there is always a chance for a panic during this window.

Make this interface to return an error if memory removal fails.  This
way it is safe to call this function without panicking machine, and also
makes it symmetric to add_memory() which already returns an error.

Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agodevice-dax: fix memory and resource leak if hotplug fails
Pavel Tatashin [Tue, 16 Jul 2019 23:30:27 +0000 (16:30 -0700)]
device-dax: fix memory and resource leak if hotplug fails

Patch series ""Hotremove" persistent memory", v6.

Recently, adding a persistent memory to be used like a regular RAM was
added to Linux.  This work extends this functionality to also allow hot
removing persistent memory.

We (Microsoft) have an important use case for this functionality.

The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s).  Yet, there
is a userland state that is expensive to recreate (~2G).

The solution is to boot machines with 2G preserved for persistent
memory.

Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime.  Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.

The series of operations look like this:

1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
   and free ramdisk.
2. Convert raw pmem0 to devdax
   ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
   echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
   echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
   echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
   echo offline > /sys/devices/system/memoryXXX/state
   echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
   ndctl create-namespace --mode raw  -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
   zero memory in pmem0 region (These machines have only regular
   volatile memory). So to have pmem0 device either memmap kernel
   parameter is used, or devices nodes in dtb are specified.

This patch (of 3):

When add_memory() fails, the resource and the memory should be freed.

Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoinclude/linux/lz4.h: fix spelling and copy-paste errors in documentation
Tom Levy [Tue, 16 Jul 2019 23:30:24 +0000 (16:30 -0700)]
include/linux/lz4.h: fix spelling and copy-paste errors in documentation

Fix a few spelling and grammar errors, and two places where fast/safe in
the documentation did not match the function.

Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.com
Signed-off-by: Tom Levy <tomlevy93@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoipc/mqueue.c: only perform resource calculation if user valid
Kees Cook [Tue, 16 Jul 2019 23:30:21 +0000 (16:30 -0700)]
ipc/mqueue.c: only perform resource calculation if user valid

Andreas Christoforou reported:

  UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
  9 * 2305843009213693951 cannot be represented in type 'long int'
  ...
  Call Trace:
    mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
    evict+0x472/0x8c0 fs/inode.c:558
    iput_final fs/inode.c:1547 [inline]
    iput+0x51d/0x8c0 fs/inode.c:1573
    mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
    mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
    vfs_mkobj+0x39e/0x580 fs/namei.c:2892
    prepare_open ipc/mqueue.c:731 [inline]
    do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771

Which could be triggered by:

        struct mq_attr attr = {
                .mq_flags = 0,
                .mq_maxmsg = 9,
                .mq_msgsize = 0x1fffffffffffffff,
                .mq_curmsgs = 0,
        };

        if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
                perror("mq_open");

mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL.  During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane).  Instead,
delay this check to after seeing a valid "user".

The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.

Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Andreas Christoforou <andreaschristofo@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoinclude/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
Drew Davenport [Tue, 16 Jul 2019 23:30:18 +0000 (16:30 -0700)]
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures

For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string.  The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.

Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27af194 ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoscripts/gdb: add helpers to find and list devices
Leonard Crestez [Tue, 16 Jul 2019 23:30:15 +0000 (16:30 -0700)]
scripts/gdb: add helpers to find and list devices

Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure.  This can be used
to fetch subsystem and driver-specific structs:

  (gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
  (gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
  (gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data

Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:

  (gdb) lx-device-list-bus usb
  (gdb) lx-device-list-class
  (gdb) lx-device-list-tree &platform_bus

Similar information is available in /sys but pointer values are
deliberately hidden.

Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoscripts/gdb: add lx-genpd-summary command
Leonard Crestez [Tue, 16 Jul 2019 23:30:12 +0000 (16:30 -0700)]
scripts/gdb: add lx-genpd-summary command

This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.

This can be useful if the target crashes or hangs because power domains
were not properly enabled.

Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agodrivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
Miroslav Lichvar [Tue, 16 Jul 2019 23:30:09 +0000 (16:30 -0700)]
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl

The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags.  The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.

Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.

Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agokernel/pid.c: convert struct pid count to refcount_t
Joel Fernandes (Google) [Tue, 16 Jul 2019 23:30:06 +0000 (16:30 -0700)]
kernel/pid.c: convert struct pid count to refcount_t

struct pid's count is an atomic_t field used as a refcount.  Use
refcount_t for it which is basically atomic_t but does additional
checking to prevent use-after-free bugs.

For memory ordering, the only change is with the following:

 - if ((atomic_read(&pid->count) == 1) ||
 -      atomic_dec_and_test(&pid->count)) {
 + if (refcount_dec_and_test(&pid->count)) {
  kmem_cache_free(ns->pid_cachep, pid);

Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per
refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the
free happens after the refcount_dec_and_test().

The above hunk also removes atomic_read() since it is not needed for the
code to work and it is unclear how beneficial it is.  The removal lets
refcount_dec_and_test() check for cases where get_pid() happened before
the object was freed.

Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agodrivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
Dan Carpenter [Tue, 16 Jul 2019 23:30:03 +0000 (16:30 -0700)]
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings

The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters.  But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string.  It could lead to an out
of bounds read.

Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoselect: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
Oleg Nesterov [Tue, 16 Jul 2019 23:29:59 +0000 (16:29 -0700)]
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()

Now that restore_saved_sigmask_unless() is always called with the same
argument right before poll_select_copy_remaining() we can move it into
poll_select_copy_remaining() and make it the only caller of restore() in
fs/select.c.

The patch also renames poll_select_copy_remaining(),
poll_select_finish() looks better after this change.

kern_select() doesn't use set_user_sigmask(), so in this case
poll_select_finish() does restore_saved_sigmask_unless() "for no
reason".  But this won't hurt, and WARN_ON(!TIF_SIGPENDING) is still
valid.

Link: http://lkml.kernel.org/r/20190606140915.GC13440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoselect: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
Oleg Nesterov [Tue, 16 Jul 2019 23:29:56 +0000 (16:29 -0700)]
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR

do_poll() returns -EINTR if interrupted and after that all its callers
have to translate it into -ERESTARTNOHAND.  Change do_poll() to return
-ERESTARTNOHAND and update (simplify) the callers.

Note that this also unifies all users of restore_saved_sigmask_unless(),
see the next patch.

Linus:

: The *right* return value will actually be then chosen by
: poll_select_copy_remaining(), which will turn ERESTARTNOHAND to EINTR
: when it can't update the timeout.
:
: Except for the cases that use restart_block and do that instead and
: don't have the whole timeout restart issue as a result.

Link: http://lkml.kernel.org/r/20190606140852.GB13440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agosignal: simplify set_user_sigmask/restore_user_sigmask
Oleg Nesterov [Tue, 16 Jul 2019 23:29:53 +0000 (16:29 -0700)]
signal: simplify set_user_sigmask/restore_user_sigmask

task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths.  This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.

This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().

Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agosignal: reorder struct sighand_struct
Alexey Dobriyan [Tue, 16 Jul 2019 23:29:50 +0000 (16:29 -0700)]
signal: reorder struct sighand_struct

struct sighand_struct::siglock field is the most used field by far, put
it first so that is can be accessed without IMM8 or IMM32 encoding on
x86_64.

Space savings (on trimmed down VM test config):

add/remove: 0/0 grow/shrink: 8/68 up/down: 49/-1147 (-1098)
Function                                     old     new   delta
complete_signal                              512     533     +21
do_signalfd4                                 335     346     +11
__cleanup_sighand                             39      43      +4
unhandled_signal                              49      52      +3
prepare_signal                               692     695      +3
ignore_signals                                37      40      +3
__tty_check_change.part                      248     251      +3
ksys_unshare                                 780     781      +1
sighand_ctor                                  33      29      -4
ptrace_trap_notify                            60      56      -4
sigqueue_free                                 98      91      -7
run_posix_cpu_timers                        1389    1382      -7
proc_pid_status                             2448    2441      -7
proc_pid_limits                              344     337      -7
posix_cpu_timer_rearm                        222     215      -7
posix_cpu_timer_get                          249     242      -7
kill_pid_info_as_cred                        243     236      -7
freeze_task                                  197     190      -7
flush_old_exec                              1873    1866      -7
do_task_stat                                3363    3356      -7
do_send_sig_info                              98      91      -7
do_group_exit                                147     140      -7
init_sighand                                2088    2080      -8
do_notify_parent_cldstop                     399     391      -8
signalfd_cleanup                              50      41      -9
do_notify_parent                             557     545     -12
__send_signal                               1029    1017     -12
ptrace_stop                                  590     577     -13
get_signal                                  1576    1563     -13
__lock_task_sighand                          112      99     -13
zap_pid_ns_processes                         391     377     -14
update_rlimit_cpu                             78      64     -14
tty_signal_session_leader                    413     399     -14
tty_open_proc_set_tty                        149     135     -14
tty_jobctrl_ioctl                            936     922     -14
set_cpu_itimer                               339     325     -14
ptrace_resume                                226     212     -14
ptrace_notify                                110      96     -14
proc_clear_tty                                81      67     -14
posix_cpu_timer_del                          229     215     -14
kernel_sigaction                             156     142     -14
getrusage                                    977     963     -14
get_current_tty                               98      84     -14
force_sigsegv                                 89      75     -14
force_sig_info                               205     191     -14
flush_signals                                 83      69     -14
flush_itimer_signals                          85      71     -14
do_timer_create                             1120    1106     -14
do_sigpending                                 88      74     -14
do_signal_stop                               537     523     -14
cgroup_init_fs_context                       644     630     -14
call_usermodehelper_exec_async               402     388     -14
calculate_sigpending                          58      44     -14
__x64_sys_timer_delete                       248     234     -14
__set_current_blocked                         80      66     -14
__ptrace_unlink                              310     296     -14
__ptrace_detach.part                         187     173     -14
send_sigqueue                                362     347     -15
get_cpu_itimer                               214     199     -15
signalfd_poll                                175     159     -16
dequeue_signal                               340     323     -17
do_getitimer                                 192     174     -18
release_task.part                           1060    1040     -20
ptrace_peek_siginfo                          408     387     -21
posix_cpu_timer_set                          827     806     -21
exit_signals                                 437     416     -21
do_sigaction                                 541     520     -21
do_setitimer                                 485     464     -21
disassociate_ctty.part                       545     517     -28
__x64_sys_rt_sigtimedwait                    721     679     -42
__x64_sys_ptrace                            1319    1277     -42
ptrace_request                              1828    1782     -46
signalfd_read                                507     459     -48
wait_consider_task                          2027    1971     -56
do_coredump                                 3672    3616     -56
copy_process.part                           6936    6871     -65

Link: http://lkml.kernel.org/r/20190503192800.GA18004@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoselftests/ptrace: add a test case for PTRACE_GET_SYSCALL_INFO
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:46 +0000 (16:29 -0700)]
selftests/ptrace: add a test case for PTRACE_GET_SYSCALL_INFO

Check whether PTRACE_GET_SYSCALL_INFO semantics implemented in the
kernel matches userspace expectations.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190510152852.GG28558@altlinux.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Shuah Khan <shuah@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoptrace: add PTRACE_GET_SYSCALL_INFO request
Elvira Khabirova [Tue, 16 Jul 2019 23:29:42 +0000 (16:29 -0700)]
ptrace: add PTRACE_GET_SYSCALL_INFO request

PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.

There are two reasons for a special syscall-related ptrace request.

Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls.  Some examples include:

 * The notorious int-0x80-from-64-bit-task issue. See [1] for details.
   In short, if a 64-bit task performs a syscall through int 0x80, its
   tracer has no reliable means to find out that the syscall was, in
   fact, a compat syscall, and misidentifies it.

 * Syscall-enter-stop and syscall-exit-stop look the same for the
   tracer. Common practice is to keep track of the sequence of
   ptrace-stops in order not to mix the two syscall-stops up. But it is
   not as simple as it looks; for example, strace had a (just recently
   fixed) long-standing bug where attaching strace to a tracee that is
   performing the execve system call led to the tracer identifying the
   following syscall-exit-stop as syscall-enter-stop, which messed up
   all the state tracking.

 * Since the introduction of commit 84d77d3f06e7 ("ptrace: Don't allow
   accessing an undumpable mm"), both PTRACE_PEEKDATA and
   process_vm_readv become unavailable when the process dumpable flag is
   cleared. On such architectures as ia64 this results in all syscall
   arguments being unavailable for the tracer.

Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee.  For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.

ptrace(2) man page:

long ptrace(enum __ptrace_request request, pid_t pid,
            void *addr, void *data);
...
PTRACE_GET_SYSCALL_INFO
       Retrieve information about the syscall that caused the stop.
       The information is placed into the buffer pointed by "data"
       argument, which should be a pointer to a buffer of type
       "struct ptrace_syscall_info".
       The "addr" argument contains the size of the buffer pointed to
       by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
       The return value contains the number of bytes available
       to be written by the kernel.
       If the size of data to be written by the kernel exceeds the size
       specified by "addr" argument, the output is truncated.

[ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.org
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Co-developed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agopowerpc: define syscall_get_error()
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:39 +0000 (16:29 -0700)]
powerpc: define syscall_get_error()

syscall_get_error() is required to be implemented on this architecture in
addition to already implemented syscall_get_nr(), syscall_get_arguments(),
syscall_get_return_value(), and syscall_get_arch() functions in order to
extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152824.GE28558@altlinux.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoparisc: define syscall_get_error()
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:35 +0000 (16:29 -0700)]
parisc: define syscall_get_error()

syscall_get_error() is required to be implemented on all architectures in
addition to already implemented syscall_get_nr(), syscall_get_arguments(),
syscall_get_return_value(), and syscall_get_arch() functions in order to
extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152812.GD28558@altlinux.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomips: define syscall_get_error()
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:32 +0000 (16:29 -0700)]
mips: define syscall_get_error()

syscall_get_error() is required to be implemented on all architectures
in addition to already implemented syscall_get_nr(),
syscall_get_arguments(), syscall_get_return_value(), and
syscall_get_arch() functions in order to extend the generic ptrace API
with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152803.GC28558@altlinux.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agohexagon: define syscall_get_error() and syscall_get_return_value()
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:28 +0000 (16:29 -0700)]
hexagon: define syscall_get_error() and syscall_get_return_value()

syscall_get_* functions are required to be implemented on all
architectures in order to extend the generic ptrace API with
PTRACE_GET_SYSCALL_INFO request.

This adds remaining 2 syscall_get_* functions as documented in
asm-generic/syscall.h: syscall_get_error and syscall_get_return_value.

Link: http://lkml.kernel.org/r/20190510152756.GB28558@altlinux.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agonds32: fix asm/syscall.h
Dmitry V. Levin [Tue, 16 Jul 2019 23:29:24 +0000 (16:29 -0700)]
nds32: fix asm/syscall.h

PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.

There are two reasons for a special syscall-related ptrace request.

Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls.  Some examples include:

 * The notorious int-0x80-from-64-bit-task issue. See [1] for details.
   In short, if a 64-bit task performs a syscall through int 0x80, its
   tracer has no reliable means to find out that the syscall was, in
   fact, a compat syscall, and misidentifies it.

 * Syscall-enter-stop and syscall-exit-stop look the same for the
   tracer. Common practice is to keep track of the sequence of
   ptrace-stops in order not to mix the two syscall-stops up. But it is
   not as simple as it looks; for example, strace had a (just recently
   fixed) long-standing bug where attaching strace to a tracee that is
   performing the execve system call led to the tracer identifying the
   following syscall-exit-stop as syscall-enter-stop, which messed up
   all the state tracking.

 * Since the introduction of commit 84d77d3f06e7 ("ptrace: Don't allow
   accessing an undumpable mm"), both PTRACE_PEEKDATA and
   process_vm_readv become unavailable when the process dumpable flag is
   cleared. On such architectures as ia64 this results in all syscall
   arguments being unavailable for the tracer.

Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee.  For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.

PTRACE_GET_SYSCALL_INFO returns the following structure:

struct ptrace_syscall_info {
__u8 op; /* PTRACE_SYSCALL_INFO_* */
__u32 arch __attribute__((__aligned__(sizeof(__u32))));
__u64 instruction_pointer;
__u64 stack_pointer;
union {
struct {
__u64 nr;
__u64 args[6];
} entry;
struct {
__s64 rval;
__u8 is_error;
} exit;
struct {
__u64 nr;
__u64 args[6];
__u32 ret_data;
} seccomp;
};
};

The structure was chosen according to [2], except for the following
changes:

 * seccomp substructure was added as a superset of entry substructure

 * the type of nr field was changed from int to __u64 because syscall
   numbers are, as a practical matter, 64 bits

 * stack_pointer field was added along with instruction_pointer field
   since it is readily available and can save the tracer from extra
   PTRACE_GETREGS/PTRACE_GETREGSET calls

 * arch is always initialized to aid with tracing system calls such as
   execve()

 * instruction_pointer and stack_pointer are always initialized so they
   could be easily obtained for non-syscall stops

 * a boolean is_error field was added along with rval field, this way
   the tracer can more reliably distinguish a return value from an error
   value

strace has been ported to PTRACE_GET_SYSCALL_INFO.  Starting with
release 4.26, strace uses PTRACE_GET_SYSCALL_INFO API as the preferred
mechanism of obtaining syscall information.

[1] https://lore.kernel.org/lkml/CA+55aFzcSVmdDj9Lh_gdbz1OzHyEm6ZrGPBDAJnywm2LF_eVyg@mail.gmail.com/
[2] https://lore.kernel.org/lkml/CAObL_7GM0n80N7J_DFw_eQyfLyzq+sf4y2AvsCCV88Tb3AwEHA@mail.gmail.com/

This patch (of 7):

All syscall_get_*() and syscall_set_*() functions must be defined as
static inline as on all other architectures, otherwise asm/syscall.h
cannot be included in more than one compilation unit.

This bug has to be fixed in order to extend the generic
ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152749.GA28558@altlinux.org
Fixes: 1932fbe36e02 ("nds32: System calls handling")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofs/reiserfs/journal.c: change return type of dirty_one_transaction
Hariprasad Kelam [Tue, 16 Jul 2019 23:29:21 +0000 (16:29 -0700)]
fs/reiserfs/journal.c: change return type of dirty_one_transaction

Change return type of dirty_one_transaction from int to void.  As this
function always return success.

Fixes below issue reported by coccicheck:

  fs/reiserfs/journal.c:1690:5-8: Unneeded variable: "ret".  Return "0" on line 1719

Link: http://lkml.kernel.org/r/20190702175430.GA5882@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bharath Vedartham <linux.bhar@gmail.com>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofs/ufs/super.c: remove set but not used variable 'usb3'
YueHaibing [Tue, 16 Jul 2019 23:29:18 +0000 (16:29 -0700)]
fs/ufs/super.c: remove set but not used variable 'usb3'

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/ufs/super.c: In function ufs_statfs:
  fs/ufs/super.c:1409:32: warning: variable usb3 set but not used [-Wunused-but-set-variable]

It is not used since commmit c596961d1b4c ("ufs: fix s_size/s_dsize
users")

Link: http://lkml.kernel.org/r/20190525140654.15924-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofs/hfsplus/xattr.c: replace strncpy with memcpy
Mathieu Malaterre [Tue, 16 Jul 2019 23:29:15 +0000 (16:29 -0700)]
fs/hfsplus/xattr.c: replace strncpy with memcpy

strncpy() was used to copy a fixed size buffer.  Since NUL-terminating
string is not required here, prefer a memcpy function.  The generated
code (ppc32) remains the same.

Silence the following warning triggered using W=1:

  fs/hfsplus/xattr.c:410:3: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]

Link: http://lkml.kernel.org/r/20190529113341.11972-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: add hinting support for partial file caching
Pedro Cuadra [Tue, 16 Jul 2019 23:29:13 +0000 (16:29 -0700)]
coda: add hinting support for partial file caching

This adds support for partial file caching in Coda.  Every read, write
and mmap informs the userspace cache manager about what part of a file
is about to be accessed so that the cache manager can ensure the
relevant parts are available before the operation is allowed to proceed.

When a read or write operation completes, this is also reported to allow
the cache manager to track when partially cached content can be
released.

If the cache manager does not support partial file caching, or when the
entire file has been fetched into the local cache, the cache manager may
return an EOPNOTSUPP error to indicate that intent upcalls are no longer
necessary until the file is closed.

[akpm@linux-foundation.org: little whitespace fixup]
Link: http://lkml.kernel.org/r/20190618181301.6960-1-jaharkes@cs.cmu.edu
Signed-off-by: Pedro Cuadra <pjcuadra@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: ftoc validity check integration
Fabian Frederick [Tue, 16 Jul 2019 23:29:09 +0000 (16:29 -0700)]
coda: ftoc validity check integration

This patch moves cfi check in coda_ftoc() instead of repeating it in the
wild.

  Module size
     text    data     bss     dec     hex filename
    28297    1040     700   30037    7555 fs/coda/coda.ko.before
    28263     980     700   29943    74f7 fs/coda/coda.ko.after

Link: http://lkml.kernel.org/r/a2c27663ec4547018c92d71c63b1dff4650b6546.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: remove sb test in coda_fid_to_inode()
Fabian Frederick [Tue, 16 Jul 2019 23:29:06 +0000 (16:29 -0700)]
coda: remove sb test in coda_fid_to_inode()

coda_fid_to_inode() is only called by coda_downcall() where sb is already
being tested.

Link: http://lkml.kernel.org/r/d2163b3136348faf83ba47dc2d65a5d0a9a135dd.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: remove sysctl object from module when unused
Fabian Frederick [Tue, 16 Jul 2019 23:29:03 +0000 (16:29 -0700)]
coda: remove sysctl object from module when unused

Inspired by NFS sysctl process

Link: http://lkml.kernel.org/r/9afcc2cd09490849b309786bbf47fef75de7f91c.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: add __init to init_coda_psdev()
Fabian Frederick [Tue, 16 Jul 2019 23:29:00 +0000 (16:29 -0700)]
coda: add __init to init_coda_psdev()

init_coda_psdev() was only called by __init function.

Link: http://lkml.kernel.org/r/a12a5a135fa6b0ea997e1a0af4be0a235c463a24.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: use SIZE() for stat
Fabian Frederick [Tue, 16 Jul 2019 23:28:57 +0000 (16:28 -0700)]
coda: use SIZE() for stat

max_t expression was already defined in coda sources

Link: http://lkml.kernel.org/r/e6cda497ce8691db155cb35f8d13ea44ca6cedeb.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: destroy mutex in put_super()
Fabian Frederick [Tue, 16 Jul 2019 23:28:54 +0000 (16:28 -0700)]
coda: destroy mutex in put_super()

We can safely destroy vc_mutex at the end of umount process.

Link: http://lkml.kernel.org/r/f436f68908c467c5663bc6a9251b52cd7b95d2a5.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: remove uapi/linux/coda_psdev.h
Jan Harkes [Tue, 16 Jul 2019 23:28:51 +0000 (16:28 -0700)]
coda: remove uapi/linux/coda_psdev.h

Nothing is left in this header that is used by userspace.

Link: http://lkml.kernel.org/r/bb11378cef94739f2cf89425dd6d302a52c64480.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: move internal defs out of include/linux/ [ver #2]
David Howells [Tue, 16 Jul 2019 23:28:47 +0000 (16:28 -0700)]
coda: move internal defs out of include/linux/ [ver #2]

Move include/linux/coda_psdev.h to fs/coda/ as there's nothing else that
uses it.

Link: http://lkml.kernel.org/r/3ceeee0415a929b89fb02700b6b4b3a07938acb8.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10590257/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: bump module version
Jan Harkes [Tue, 16 Jul 2019 23:28:44 +0000 (16:28 -0700)]
coda: bump module version

The out of tree module version had been bumped several times already,
but we haven't kept this in-tree one in sync, partly because most
changes go from here to the out-of-tree copy.

Link: http://lkml.kernel.org/r/8b0ab50a2da2f0180ac32c79d91811b4d1d0bd8b.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: get rid of CODA_FREE()
Dan Carpenter [Tue, 16 Jul 2019 23:28:41 +0000 (16:28 -0700)]
coda: get rid of CODA_FREE()

The CODA_FREE() macro just calls kvfree().  We can call that directly
instead.

Link: http://lkml.kernel.org/r/4950a94fd30ec5f84835dd4ca0bb67c0448672f5.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: get rid of CODA_ALLOC()
Dan Carpenter [Tue, 16 Jul 2019 23:28:38 +0000 (16:28 -0700)]
coda: get rid of CODA_ALLOC()

These days we have kvzalloc() so we can delete CODA_ALLOC().

I made a couple related changes in coda_psdev_write().  First, I added
some error handling to avoid a NULL dereference if the allocation
failed.  Second, I used kvmalloc() instead of kvzalloc() because we copy
over the memory on the next line so there is no need to zero it first.

Link: http://lkml.kernel.org/r/e56010c822e7a7cbaa8a238cf82ad31c67eaa800.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: change Coda's user api to use 64-bit time_t in timespec
Jan Harkes [Tue, 16 Jul 2019 23:28:35 +0000 (16:28 -0700)]
coda: change Coda's user api to use 64-bit time_t in timespec

Move the 32-bit time_t problems to userspace.

Link: http://lkml.kernel.org/r/8d089068823bfb292a4020f773922fbd82ffad39.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: stop using 'struct timespec' in user API
Arnd Bergmann [Tue, 16 Jul 2019 23:28:32 +0000 (16:28 -0700)]
coda: stop using 'struct timespec' in user API

We exchange file timestamps with user space using psdev device
read/write operations with a fixed but architecture specific binary
layout.

On 32-bit systems, this uses a 'timespec' structure that is defined by
the C library to contain two 32-bit values for seconds and nanoseconds.
As we get ready for the year 2038 overflow of the 32-bit signed seconds,
the kernel now uses 64-bit timestamps internally, and user space will do
the same change by changing the 'timespec' definition in the future.

Unfortunately, this breaks the layout of the coda_vattr structure, so we
need to redefine that in terms of something that does not change.  I'm
introducing a new 'struct vtimespec' structure here that keeps the
existing layout, and the same change has to be done in the coda user
space copy of linux/coda.h before anyone can use that on a 32-bit
architecture with 64-bit time_t.

An open question is what should happen to actual times past y2038, as
they are now truncated to the last valid date when sent to user space,
and interpreted as pre-1970 times when a timestamp with the MSB set is
read back into the kernel.  Alternatively, we could change the new
timespec64_to_coda()/coda_to_timespec64() functions to use a different
interpretation and extend the available range further to the future by
disallowing past timestamps.  This would require more changes in the
user space side though.

Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10474735/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: clean up indentation, replace spaces with tab
Colin Ian King [Tue, 16 Jul 2019 23:28:29 +0000 (16:28 -0700)]
coda: clean up indentation, replace spaces with tab

Trivial fix to clean up indentation, replace spaces with tab

Link: http://lkml.kernel.org/r/ffc2bfa5a37ffcdf891c51b2e2ed618103965b24.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agouapi linux/coda_psdev.h: move CODA_REQ_ from uapi to kernel side headers
Jan Harkes [Tue, 16 Jul 2019 23:28:26 +0000 (16:28 -0700)]
uapi linux/coda_psdev.h: move CODA_REQ_ from uapi to kernel side headers

These constants only used internally and not exposed to userspace.

Link: http://lkml.kernel.org/r/baeafc30dad70d8b422ee679420099c2d8aa7da0.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: don't try to print names that were considered too long
Jan Harkes [Tue, 16 Jul 2019 23:28:23 +0000 (16:28 -0700)]
coda: don't try to print names that were considered too long

Probably safer to just show the unexpected length and debug it from the
userspace side.

Link: http://lkml.kernel.org/r/582ae759a4fdfa31a64c35de489fa4efabac09d6.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: fix build using bare-metal toolchain
Sam Protsenko [Tue, 16 Jul 2019 23:28:20 +0000 (16:28 -0700)]
coda: fix build using bare-metal toolchain

The kernel is self-contained project and can be built with bare-metal
toolchain.  But bare-metal toolchain doesn't define __linux__.  Because
of this u_quad_t type is not defined when using bare-metal toolchain and
codafs build fails.  This patch fixes it by defining u_quad_t type
unconditionally.

Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: potential buffer overflow in coda_psdev_write()
Jan Harkes [Tue, 16 Jul 2019 23:28:16 +0000 (16:28 -0700)]
coda: potential buffer overflow in coda_psdev_write()

Add checks to make sure the downcall message we got from the Coda cache
manager is large enough to contain the data it is supposed to have.
i.e.  when we get a CODA_ZAPDIR we can access &out->coda_zapdir.CodaFid.

Link: http://lkml.kernel.org/r/894fb6b250add09e4e3935f14649f21284a5cb18.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: add error handling for fget
Zhouyang Jia [Tue, 16 Jul 2019 23:28:13 +0000 (16:28 -0700)]
coda: add error handling for fget

When fget fails, the lack of error-handling code may cause unexpected
results.

This patch adds error-handling code after calling fget.

Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agouapi linux/coda_psdev.h: move upc_req definition from uapi to kernel side headers
Mikko Rapeli [Tue, 16 Jul 2019 23:28:10 +0000 (16:28 -0700)]
uapi linux/coda_psdev.h: move upc_req definition from uapi to kernel side headers

Only users of upc_req in kernel side fs/coda/psdev.c and
fs/coda/upcall.c already include linux/coda_psdev.h.

Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in
  https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/

Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace:

  linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type
  struct list_head    uc_chain;
                   ^
  linux/coda_psdev.h:13:2: error: unknown type name `caddr_t'
  caddr_t             uc_data;
  ^
  linux/coda_psdev.h:14:2: error: unknown type name `u_short'
  u_short             uc_flags;
  ^
  linux/coda_psdev.h:15:2: error: unknown type name `u_short'
  u_short             uc_inSize;  /* Size is at most 5000 bytes */
  ^
  linux/coda_psdev.h:16:2: error: unknown type name `u_short'
  u_short             uc_outSize;
  ^
  linux/coda_psdev.h:17:2: error: unknown type name `u_short'
  u_short             uc_opcode;  /* copied from data to save lookup */
  ^
  linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t'
  wait_queue_head_t   uc_sleep;   /* process' wait queue */
  ^

Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agouapi linux/coda.h: use __kernel_pid_t for userspace
Mikko Rapeli [Tue, 16 Jul 2019 23:28:07 +0000 (16:28 -0700)]
uapi linux/coda.h: use __kernel_pid_t for userspace

Part of a patch by Mikko Rapeli, as Arnd Bergman commented on the
original patch.

   pid_t might differ between libc and the kernel, so the kernel
   interface has to use types that the kernel defines.

Link: http://lkml.kernel.org/r/f374a71f4d351bc8c8b3ac18ad7765c88d806d10.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocoda: pass the host file in vma->vm_file on mmap
Jan Harkes [Tue, 16 Jul 2019 23:28:04 +0000 (16:28 -0700)]
coda: pass the host file in vma->vm_file on mmap

Patch series "Coda updates".

The following patch series is a collection of various fixes for Coda,
most of which were collected from linux-fsdevel or linux-kernel but
which have as yet not found their way upstream.

This patch (of 22):

Various file systems expect that vma->vm_file points at their own file
handle, several use file_inode(vma->vm_file) to get at their inode or
use vma->vm_file->private_data.  However the way Coda wrapped mmap on a
host file broke this assumption, vm_file was still pointing at the Coda
file and the host file systems would scribble over Coda's inode and
private file data.

This patch fixes the incorrect expectation and wraps vm_ops->open and
vm_ops->close to allow Coda to track when the vm_area_struct is
destroyed so we still release the reference on the Coda file handle at
the right time.

Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()
Anshuman Khandual [Tue, 16 Jul 2019 23:28:00 +0000 (16:28 -0700)]
mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()

Architectures which support kprobes have very similar boilerplate around
calling kprobe_fault_handler().  Use a helper function in kprobes.h to
unify them, based on the x86 code.

This changes the behaviour for other architectures when preemption is
enabled.  Previously, they would have disabled preemption while calling
the kprobe handler.  However, preemption would be disabled if this fault
was due to a kprobe, so we know the fault was not due to a kprobe
handler and can simply return failure.

This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes:
Refactor kprobes_fault() like kprobe_exceptions_notify()")

[anshuman.khandual@arm.com: export kprobe_fault_handler()]
Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agoinit/Kconfig: fix neighboring typos
Kees Cook [Tue, 16 Jul 2019 23:27:57 +0000 (16:27 -0700)]
init/Kconfig: fix neighboring typos

This fixes a couple typos I noticed in the slab Kconfig:

sacrifies -> sacrifices
accellerate -> accelerate

Seeing as no other instances of these typos are found elsewhere in the
kernel and that I originally added one of the two, I can only assume
working on slab must have caused damage to the spelling centers of my
brain.

Link: http://lkml.kernel.org/r/201905292203.CD000546EB@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofs/binfmt_elf.c: delete stale comment
Alexey Dobriyan [Tue, 16 Jul 2019 23:27:54 +0000 (16:27 -0700)]
fs/binfmt_elf.c: delete stale comment

"passed_fileno" variable was deleted 11 years ago in 2.6.25.

Link: http://lkml.kernel.org/r/20190529201747.GA23248@avx2
Fixes: d20894a23708 ("Remove a.out interpreter support in ELF loader")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agofs/binfmt_flat.c: remove set but not used variable 'inode'
YueHaibing [Tue, 16 Jul 2019 23:27:51 +0000 (16:27 -0700)]
fs/binfmt_flat.c: remove set but not used variable 'inode'

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/binfmt_flat.c: In function load_flat_file:
  fs/binfmt_flat.c:419:16: warning: variable inode set but not used [-Wunused-but-set-variable]

It's never used and can be removed.

Link: http://lkml.kernel.org/r/20190525125341.9844-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agocheckpatch.pl: warn on duplicate sysctl local variable
Matteo Croce [Tue, 16 Jul 2019 23:27:48 +0000 (16:27 -0700)]
checkpatch.pl: warn on duplicate sysctl local variable

Commit d91bff3011cf ("proc/sysctl: add shared variables for range
check") adds some shared const variables to be used instead of a local
copy in each source file.  Warn when a chunk duplicates one of these
values in a ctl_table struct:

    $ scripts/checkpatch.pl 0001-test-commit.patch
    WARNING: duplicated sysctl range checking value 'zero', consider using the shared one in include/linux/sysctl.h
    #27: FILE: arch/arm/kernel/isa.c:48:
    +               .extra1         = &zero,

    WARNING: duplicated sysctl range checking value 'int_max', consider using the shared one in include/linux/sysctl.h
    #28: FILE: arch/arm/kernel/isa.c:49:
    +               .extra2         = &int_max,

    total: 0 errors, 2 warnings, 14 lines checked

Link: http://lkml.kernel.org/r/20190531131422.14970-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agolib/rbtree: avoid generating code twice for the cached versions
Michel Lespinasse [Tue, 16 Jul 2019 23:27:45 +0000 (16:27 -0700)]
lib/rbtree: avoid generating code twice for the cached versions

As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.

Change the implementation to do just that.  Previously the update of
rb_leftmost was wired deeper into the implmentation, but there were some
disadvantages to that - mostly, lib/rbtree.c had separate instantiations
for rb_insert_color() vs rb_insert_color_cached(), as well as rb_erase()
vs rb_erase_cached(), which were doing exactly the same thing save for
the rb_leftmost update at the start of either function.

   text    data     bss     dec     hex filename
   5405     120       0    5525    1595 lib/rbtree.o-vanilla
   3827      96       0    3923     f53 lib/rbtree.o-patch

[dave@stgolabs.net: changelog addition]
Link: http://lkml.kernel.org/r/20190628171416.by5gdizl3rcxk5h5@linux-r8p5
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190628045008.39926-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agolib/test_meminit.c: minor test fixes
Alexander Potapenko [Tue, 16 Jul 2019 23:27:42 +0000 (16:27 -0700)]
lib/test_meminit.c: minor test fixes

Fix the following issues in test_meminit.c:
 - |size| in fill_with_garbage_skip() should be signed so that it
   doesn't overflow if it's not aligned on sizeof(*p);
 - fill_with_garbage_skip() should actually skip |skip| bytes;
 - do_kmem_cache_size() should deallocate memory in the RCU case.

Link: http://lkml.kernel.org/r/20190626133135.217355-1-glider@google.com
Fixes: 7e659650cbda ("lib: introduce test_meminit module")
Fixes: 94e8988d91c7 ("lib/test_meminit.c: fix -Wmaybe-uninitialized false positive")
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agolib/test_meminit.c: fix -Wmaybe-uninitialized false positive
Arnd Bergmann [Tue, 16 Jul 2019 23:27:39 +0000 (16:27 -0700)]
lib/test_meminit.c: fix -Wmaybe-uninitialized false positive

The conditional logic is too complicated for the compiler to fully
comprehend:

  lib/test_meminit.c: In function 'test_meminit_init':
  lib/test_meminit.c:236:5: error: 'buf_copy' may be used uninitialized in this function [-Werror=maybe-uninitialized]
       kfree(buf_copy);
       ^~~~~~~~~~~~~~~
  lib/test_meminit.c:201:14: note: 'buf_copy' was declared here

Simplify it by splitting out the non-rcu section.

Link: http://lkml.kernel.org/r/20190617131210.2190280-1-arnd@arndb.de
Fixes: af734ee6ec85 ("lib: introduce test_meminit module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agolib/string_helpers: fix some kerneldoc warnings
Jonathan Corbet [Tue, 16 Jul 2019 23:27:36 +0000 (16:27 -0700)]
lib/string_helpers: fix some kerneldoc warnings

Due to some sad limitations in how kerneldoc comments are parsed, the
documentation in lib/string_helpers.c generates these warnings:

  lib/string_helpers.c:236: WARNING: Unexpected indentation.
  lib/string_helpers.c:241: WARNING: Block quote ends without a blank line; unexpected unindent.
  lib/string_helpers.c:446: WARNING: Unexpected indentation.
  lib/string_helpers.c:451: WARNING: Block quote ends without a blank line; unexpected unindent.
  lib/string_helpers.c:474: WARNING: Unexpected indentation.

Rework the comments to obtain something like the desired result.

Link: http://lkml.kernel.org/r/20190607110952.409011ba@lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm/ioremap: probe platform for p4d huge map support
Anshuman Khandual [Tue, 16 Jul 2019 23:27:33 +0000 (16:27 -0700)]
mm/ioremap: probe platform for p4d huge map support

Finish up what commit c2febafc6773 ("mm: convert generic code to 5-level
paging") started while levelling up P4D huge mapping support at par with
PUD and PMD.  A new arch call back arch_ioremap_p4d_supported() is added
which just maintains status quo (P4D huge map not supported) on x86,
arm64 and powerpc.

When HAVE_ARCH_HUGE_VMAP is enabled its just a simple check from the
arch about the support, hence runtime effects are minimal.

Link: http://lkml.kernel.org/r/1561699231-20991-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 months agomm/ioremap: check virtual address alignment while creating huge mappings
Anshuman Khandual [Tue, 16 Jul 2019 23:27:30 +0000 (16:27 -0700)]
mm/ioremap: check virtual address alignment while creating huge mappings

Virtual address alignment is essential in ensuring correct clearing for
all intermediate level pgtable entries and freeing associated pgtable
pages.  An unaligned address can end up randomly freeing pgtable page
that potentially still contains valid mappings.  Hence also check it's
alignment along with existing phys_addr check.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>